The molecular geometries and electronic structures of 30 nitrobenzenes have been calculated by using semi-empirical MO AM1 and PM3 methods. EHOMO, ELUMO, ENHOMO, ENLUMO, AE, QNO2, Qc and V were selected as the structu...The molecular geometries and electronic structures of 30 nitrobenzenes have been calculated by using semi-empirical MO AM1 and PM3 methods. EHOMO, ELUMO, ENHOMO, ENLUMO, AE, QNO2, Qc and V were selected as the structural descriptors. The acute toxicity （-log/C50） of nitrobenzenes to tetrahymena pyriformis along with the above eight structural parameters was used to establish the quantitative structure-activity relationships （QSARs）. The results indicate that the established model based on AM I method is superior to that on PM3 method not only for the stability but also for the predictive powers of the model. Based on AM1 parameters, a further classifying discussion was presented for the study of nitrobenzene toxic mechanism. The results show that the substituents, nitro group and halogen substituents on the aromatic ring are crucial to the chemicals＇ toxicity. For nitrobenzenes without halogen or other substituent, the reduction of nitro group is the main route. However, for those with halogen substituents, their next lowest unoccupied molecular orbital may take part in the toxic action betweeen the chemicals and macromolecules, and ENLUMO has the most important effect on these chemicals＇ toxicity.展开更多
To improve the land surface simulation in the arid and semi-arid areas of northern China, the observational data from two field experiments in Dunhuang and Tongyu are used to optimize the parameters in the land surfac...To improve the land surface simulation in the arid and semi-arid areas of northern China, the observational data from two field experiments in Dunhuang and Tongyu are used to optimize the parameters in the land surface model, BATS, through calibration with the multicriteria method. Sensitivity analysis to the parameters in Dunhuang and Tongyu indicates that different parameters need to be calibrated in two sites with different environmental and climate regimes. Comparison of observed sensible heat flux, latent heat flux, and ground surface temperature with the simulated ones shows the simulations with the optimized parameters have been substantially improved. Especially, the holistic simulations with the calibration of the parameter values are much closer to the observations in the arid region （Dunhuang）, and the energy partition with the calibrated parameters can also be simulated well in the semi-arid region （Tongyu）. Whole results demonstrate that the parameter calibration of the land surface model is important when the model is to be used to investigate the land-air interaction.展开更多
Based on the transfer matrix method and the virtual source simulation technique, this paper proposes a novel semi-analytical and semi-numerical method for solving 2-D sound- structure interaction problems under a harm...Based on the transfer matrix method and the virtual source simulation technique, this paper proposes a novel semi-analytical and semi-numerical method for solving 2-D sound- structure interaction problems under a harmonic excitation.Within any integration segment, as long as its length is small enough,along the circumferential curvilinear coordinate,the non- homogeneous matrix differential equation of an elastic ring of complex geometrical shape can be rewritten in terms of the homogeneous one by the method of extended homogeneous capacity proposed in this paper.For the exterior fluid domain,the multi-circular virtual source simulation technique is adopted.The source density distributed on each virtual circular curve may be ex- panded as the Fourier's series.Combining with the inverse fast Fourier transformation,a higher accuracy and efficiency method for solving 2-D exterior Helmholtz's problems is presented in this paper.In the aspect of solution to the coupling equations,the state vectors of elastic ring induced by the given harmonic excitation and generalized forces of coefficients of the Fourier series can be obtained respectively by using a high precision integration scheme combined with the method of extended homogeneous capacity put forward in this paper.According to the superposition princi- ple and compatibility conditions at the interface between the elastic ring and fluid,the algebraic equation of system can be directly constructed by using the least square approximation.Examples of acoustic radiation from two typical fluid-loaded elastic rings under a harmonic concentrated force are presented.Numerical results show that the method proposed is more efficient than the mixed FE-BE method in common use.展开更多
A meshless method, Moving-Particle Semi-hnplicit Method （MPS） is presented in this paper to simulate the rolling of different 2D ship sections. Sections S. S. 0.5, S.S. 5.0 and S. S. 7.0 of series 60 with CB = 0.6 a...A meshless method, Moving-Particle Semi-hnplicit Method （MPS） is presented in this paper to simulate the rolling of different 2D ship sections. Sections S. S. 0.5, S.S. 5.0 and S. S. 7.0 of series 60 with CB = 0.6 are chosen for the simulation. It shows that the result of MPS is very close to results of experiments or mesh-numerical simulations. In the simulation of MPS, vortices are found periodically in bilges of ship sections. In section S. S. 5.0 and section S. S. 7.0, which are close to the middle ship, two little vortices are found at different bilges of the section, in section S. S. 0.5, which is close to the bow, only one big vortex is found at the bottom of the section, these vortices patterns are consistent with the theory of Ikeda. The distribution of shear stress and pressure on the rolling hull of ship section is calculated. When vortices are in bilges of the section, the sign clmnge of pressure can be found, but in section S. S. 0.5, there is no sign change of pressure because only one vortex in the bottom of the section. With shear stress distribution, it can be found the shear stress in bilges is bigger than that at other part of the ship section. As the free surface is considered, the shear stress of both sides near the free surface is close to zero and even sign changed.展开更多
This paper praidrs a theurvtheal hasts for establishing the congergente of paraled interative and itratiee techaigues,for computing nmtrfied solution of Ar three A is a singal M-matrix,These results do not assuine A t...This paper praidrs a theurvtheal hasts for establishing the congergente of paraled interative and itratiee techaigues,for computing nmtrfied solution of Ar three A is a singal M-matrix,These results do not assuine A to irreducihle,A concrete relaxed parallet multixpla ting algorithin culled the parallel multispliting AOR algarithm is showed Findly,numericales amples are givep,arhleh show effertielve of parallel iterurise methods for singalar展开更多
New strain induced melt activated (new SIMA) method for preparing AZ91D magnesium alloy semi-solid billet is introduced by applying equal channel angular extrusion into strain induced step in SIMA method, by which sem...New strain induced melt activated (new SIMA) method for preparing AZ91D magnesium alloy semi-solid billet is introduced by applying equal channel angular extrusion into strain induced step in SIMA method, by which semi-solid billet with fine spheroidal grains and average grain size of 18 μm can be prepared. Furthermore, average grain size of semi-solid billet is reduced with increasing extrusion pass of AZ91D magnesium alloy obtained in ECAE process. By using semi-solid billet prepared by new SIMA, thixoforged magazine plates component with high mechanical properties such as yield strength of 201.4 MPa, ultimate tensile strength of 321.8 MPa and elongation of 15.3%, can be obtained.展开更多
Based on the extended homogeneous capacity high precision integration method and the spectrum method of virtual boundary with a complex radius vector, a novel semi-analytical method, which has satisfactory computation...Based on the extended homogeneous capacity high precision integration method and the spectrum method of virtual boundary with a complex radius vector, a novel semi-analytical method, which has satisfactory computation efectiveness and precision, is presented for solving the acoustic radiation from a submerged infnite non-circular cylindrical shell stifened by longitudinal ribs by means of the Fourier integral transformation and stationary phase method. In this work, besides the normal interacting force, which is commonly adopted by some researchers, the other interacting forces and moments between the longitudinal ribs and the non-circular cylindrical shell are considered at the same time. The efects of the number and the size of the cross-section of longitudinal ribs on the characteristics of acoustic radiation are investigated. Numerical results show that the method proposed is more efcient than the existing mixed FE-BE method.展开更多
By using Cauchy's integral formula of analytical complex function and the third order complex spline function, a general boundary solution method for solving the complex potential field of the flow field around a...By using Cauchy's integral formula of analytical complex function and the third order complex spline function, a general boundary solution method for solving the complex potential field of the flow field around a 2D semi infinite body is presented in this paper. The pressure coefficients obtained by the present method agree well with those given by Acrivous, showing the validity of our method.展开更多
In semi-solid forming process, preparing the slurry with rosette or globular microstructure is very important. A new approach named the damper cooling tube method （DCT）, to produce the semi-solid metal slurry, has b...In semi-solid forming process, preparing the slurry with rosette or globular microstructure is very important. A new approach named the damper cooling tube method （DCT）, to produce the semi-solid metal slurry, has been introduced. To optimize the technical parameters in designing the apparatus, the finite volume method was adopted to simulate the flow process. The temperature effects on the rheological properties of the slurries were also considered. The effects of the technical parameters on the slurry properties were studied in detail.展开更多
Numerical simulation tools are required to describe large deformations of geomaterials for evaluating the risk of geo-disasters. This study focused on moving particle semi-implicit(MPS) method, which is a Lagrangian g...Numerical simulation tools are required to describe large deformations of geomaterials for evaluating the risk of geo-disasters. This study focused on moving particle semi-implicit(MPS) method, which is a Lagrangian gridless particle method, and investigated its performance and stability to simulate large deformation of geomaterials. A calculation method was developed using geomaterials modeled as Bingham fluids to improve the original MPS method and enhance its stability. Two numerical tests showed that results from the improved MPS method was in good agreement with the theoretical value.Furthermore, numerical simulations were calibrated by laboratory experiments. It showed that the simulation results matched well with the experimentally observed free-surface configurations for flowing sand. In addition, the model could generally predict the time-history of the impact force. The MPS method could be a useful tool to evaluate large deformation of geomaterials.展开更多
Semi_weight function method is developed to solve the plane problem of two bonded dissimilar materials containing a crack along the bond. From equilibrium equation, stress and strain relationship, conditions of contin...Semi_weight function method is developed to solve the plane problem of two bonded dissimilar materials containing a crack along the bond. From equilibrium equation, stress and strain relationship, conditions of continuity across interface and free crack surface, the stress and displacement fields were obtained. The eigenvalue of these fields is lambda. Semi_weight functions were obtained as virtual displacement and stress fields with eigenvalue?_lambda. Integral expression of fracture parameters, K Ⅰ and K Ⅱ, were obtained from reciprocal work theorem with semi_weight functions and approximate displacement and stress values on any integral path around crack tip. The calculation results of applications show that the semi_weight function method is a simple, convenient and high precision calculation method.展开更多
The effect of axial shallow groove on the nonlinear dynamic response and buckling of laminated cylindrical shells subjected to radial compression loading was investigated. Based on the first-order shear deformation th...The effect of axial shallow groove on the nonlinear dynamic response and buckling of laminated cylindrical shells subjected to radial compression loading was investigated. Based on the first-order shear deformation theory （FSDT）, the nonlinear dynamic equations involving the transverse shear deformation and initial geometric imperfections were derived with the Hamilton philosophy. The axial shallow groove of the laminated composite cylindrical shell was treated as the initial geometric imperfections in the dynamic equations. A semi-analytical method of expanding displacements and loads along the circumferential direction and employing the finite difference method along the axial direction and in the time domain is used to solve the governing equations and obtain the dynamic response of the laminated shell. The B-R criterion was employed to determine the critical loads of dynamic buckling of the shell. The effects of the parameters of the shallow groove on the dynamic response and buckling were discussed in this paper and the results show that the axial shallow grooves greatly affect the dynamic response and buckling.展开更多
An H1-Galerkin expanded mixed finite element method is discussed for a class of second order semi-linear hyperbolic wave equations. By using the mixed formulation, we can get the optimal approximation for three variab...An H1-Galerkin expanded mixed finite element method is discussed for a class of second order semi-linear hyperbolic wave equations. By using the mixed formulation, we can get the optimal approximation for three variables: the scalar unknown, its gradient and its flux(coefficient times the gradient), simultaneously. We also prove the existence and uniqueness of semi-discrete solution. Finally, we obtain some numerical results to illustrate the efficiency of the method.展开更多
Semi-inverse method, which is an integration and an extension of Hu's try-and-error method, Chien's veighted residual method and Liu's systematic method, is proposed to establish generalized variational pr...Semi-inverse method, which is an integration and an extension of Hu's try-and-error method, Chien's veighted residual method and Liu's systematic method, is proposed to establish generalized variational principles with multi-variables without arty variational crisis phenomenon. The method is to construct an energy trial-functional with an unknown function F, which can be readily identified by making the trial-functional stationary and using known constraint equations. As a result generalized variational principles with two kinds of independent variables (such as well-known Hellinger-Reissner variational principle and Hu-Washizu principle) and generalized variational principles with three kinds of independent variables (such as Chien's generalized variational principles) in elasticity have been deduced without using Lagrange multiplier method. By semi-inverse method, the author has also proved that Hu-Washizu principle is actually a variational principle with only two kinds of independent variables, stress-strain relations are still its constraints.展开更多
A Cauchy problem for the semi-linear elliptic equation is investigated. We use a filtering function method to define a regularization solution for this ill-posed problem. The existence, uniqueness and stability of the...A Cauchy problem for the semi-linear elliptic equation is investigated. We use a filtering function method to define a regularization solution for this ill-posed problem. The existence, uniqueness and stability of the regularization solution are proven;a convergence estimate of H?lder type for the regularization method is obtained under the a-priori bound assumption for the exact solution. An iterative scheme is proposed to calculate the regularization solution;some numerical results show that this method works well.展开更多
A radial crack emanating from a semi-circular notch is of significant engineering importance. Accurate determination of key fracture mechanics parameters is essential for damage tolerance design and fatigue crack grow...A radial crack emanating from a semi-circular notch is of significant engineering importance. Accurate determination of key fracture mechanics parameters is essential for damage tolerance design and fatigue crack growth life predictions. The purpose of this paper is to provide an efficient and accurate closed-form weight function approach to the calculation of crack surface displacements for a radial crack emanating from a semi-circular notch in a semi-infinite plate. Results are presented for two load conditions： remote applied stress and uniform stress segment applied to crack surfaces. Based on a correction of stress intensity factor ratio, highly accurate analytical equations of crack surface displacements under the two load conditions are developed by fitting the data obtained with the weight function method. It is demonstrated that the Wu- Carlsson closed-form weight functions are very efficient, accurate and easy-to-use for calculating crack surface displacements for arbitrary load conditions. The method will facilitate fatigue crack closure and other fracture mechanics analyses where accurate crack surface displacements are required.展开更多
We discuss the incomplete semi-iterative method (ISIM) for an approximate solution of a linear fixed point equations x=Tx+c with a bounded linear operator T acting on a complex Banach space X such that its resolvent h...We discuss the incomplete semi-iterative method (ISIM) for an approximate solution of a linear fixed point equations x=Tx+c with a bounded linear operator T acting on a complex Banach space X such that its resolvent has a pole of order k at the point 1. Sufficient conditions for the convergence of ISIM to a solution of x=Tx+c, where c belongs to the range space of R(I-T) k, are established. We show that the ISIM has an attractive feature that it is usually convergent even when the spectral radius of the operator T is greater than 1 and Ind 1T≥1. Applications in finite Markov chain is considered and illustrative examples are reported, showing the convergence rate of the ISIM is very high.展开更多
In this paper, an effective numerical method for physically nonlinear interaction analysis is studied, in which the elasto-plastic problem of coupled analysis between the structure and medium may be transformed into s...In this paper, an effective numerical method for physically nonlinear interaction analysis is studied, in which the elasto-plastic problem of coupled analysis between the structure and medium may be transformed into several linear problems by means of the perturbation technique, then, the finite strip method and finite layer method are used to analyze the underground structure and rock medium, respectively, for their corresponding linear problems, so the purpose of simplifying the calculation can be achieved. This kind of method has made use of the twice semi-analytical technique: the perturbation and semi-analytic solution function to simplify 3-D nonlinear coupled problem into 1-D linear numerical one. In addition, this method is a new advance of semi-analytical method in the application to nonlinear problems by means of combinating with the analytical perturbation method, and it is also a branch of the perturbational numerical method developed in last years.展开更多
In the process of preparation of semi-solid metal materials, a variety of factors would influence the preparing time and the morphology of non-dendritic microstructure. The aim of this work is using phase-field method...In the process of preparation of semi-solid metal materials, a variety of factors would influence the preparing time and the morphology of non-dendritic microstructure. The aim of this work is using phase-field method to simulate non-dendritic growth during preparation of AI-4Cu-Mg semi-solid alloy by electromagnetic stirring method （EMS method）. Several factors such as the disturbance intensity, anisotropy, the thickness of the interface and the ratio of diffusivity in solid and liquid were considered. It is shown that decreasing the thickness of the interface results in more circular outline of particles, and increasing the diffusivity in solid can reduce degree of microsegregation. The disturbance intensity in the model can be connected with current intensity of stator or magnetic induction density impressed. Simulation results show that the larger the disturbance intensity or magnetic induction density, the more globular morphology the original phase in the matrix.展开更多
基金This work was supported by the National Natural Science Foundation of China (No.10576030)
文摘The molecular geometries and electronic structures of 30 nitrobenzenes have been calculated by using semi-empirical MO AM1 and PM3 methods. EHOMO, ELUMO, ENHOMO, ENLUMO, AE, QNO2, Qc and V were selected as the structural descriptors. The acute toxicity （-log/C50） of nitrobenzenes to tetrahymena pyriformis along with the above eight structural parameters was used to establish the quantitative structure-activity relationships （QSARs）. The results indicate that the established model based on AM I method is superior to that on PM3 method not only for the stability but also for the predictive powers of the model. Based on AM1 parameters, a further classifying discussion was presented for the study of nitrobenzene toxic mechanism. The results show that the substituents, nitro group and halogen substituents on the aromatic ring are crucial to the chemicals＇ toxicity. For nitrobenzenes without halogen or other substituent, the reduction of nitro group is the main route. However, for those with halogen substituents, their next lowest unoccupied molecular orbital may take part in the toxic action betweeen the chemicals and macromolecules, and ENLUMO has the most important effect on these chemicals＇ toxicity.
基金supported jointlyby the Chinese Academy of Sciences under Grant KZCX2-YW-220the National Basic Research Program of Chinaunder Grant 2009CB421405the National Natural Sci-ence Foundation of China under Grant No.40730952
文摘To improve the land surface simulation in the arid and semi-arid areas of northern China, the observational data from two field experiments in Dunhuang and Tongyu are used to optimize the parameters in the land surface model, BATS, through calibration with the multicriteria method. Sensitivity analysis to the parameters in Dunhuang and Tongyu indicates that different parameters need to be calibrated in two sites with different environmental and climate regimes. Comparison of observed sensible heat flux, latent heat flux, and ground surface temperature with the simulated ones shows the simulations with the optimized parameters have been substantially improved. Especially, the holistic simulations with the calibration of the parameter values are much closer to the observations in the arid region （Dunhuang）, and the energy partition with the calibrated parameters can also be simulated well in the semi-arid region （Tongyu）. Whole results demonstrate that the parameter calibration of the land surface model is important when the model is to be used to investigate the land-air interaction.
基金Project supported by the National Natural Science Foundation of China (No.10172038)
文摘Based on the transfer matrix method and the virtual source simulation technique, this paper proposes a novel semi-analytical and semi-numerical method for solving 2-D sound- structure interaction problems under a harmonic excitation.Within any integration segment, as long as its length is small enough,along the circumferential curvilinear coordinate,the non- homogeneous matrix differential equation of an elastic ring of complex geometrical shape can be rewritten in terms of the homogeneous one by the method of extended homogeneous capacity proposed in this paper.For the exterior fluid domain,the multi-circular virtual source simulation technique is adopted.The source density distributed on each virtual circular curve may be ex- panded as the Fourier's series.Combining with the inverse fast Fourier transformation,a higher accuracy and efficiency method for solving 2-D exterior Helmholtz's problems is presented in this paper.In the aspect of solution to the coupling equations,the state vectors of elastic ring induced by the given harmonic excitation and generalized forces of coefficients of the Fourier series can be obtained respectively by using a high precision integration scheme combined with the method of extended homogeneous capacity put forward in this paper.According to the superposition princi- ple and compatibility conditions at the interface between the elastic ring and fluid,the algebraic equation of system can be directly constructed by using the least square approximation.Examples of acoustic radiation from two typical fluid-loaded elastic rings under a harmonic concentrated force are presented.Numerical results show that the method proposed is more efficient than the mixed FE-BE method in common use.
基金the National Natural Science Foundation of China (Grant No.50579035)
文摘A meshless method, Moving-Particle Semi-hnplicit Method （MPS） is presented in this paper to simulate the rolling of different 2D ship sections. Sections S. S. 0.5, S.S. 5.0 and S. S. 7.0 of series 60 with CB = 0.6 are chosen for the simulation. It shows that the result of MPS is very close to results of experiments or mesh-numerical simulations. In the simulation of MPS, vortices are found periodically in bilges of ship sections. In section S. S. 5.0 and section S. S. 7.0, which are close to the middle ship, two little vortices are found at different bilges of the section, in section S. S. 0.5, which is close to the bow, only one big vortex is found at the bottom of the section, these vortices patterns are consistent with the theory of Ikeda. The distribution of shear stress and pressure on the rolling hull of ship section is calculated. When vortices are in bilges of the section, the sign clmnge of pressure can be found, but in section S. S. 0.5, there is no sign change of pressure because only one vortex in the bottom of the section. With shear stress distribution, it can be found the shear stress in bilges is bigger than that at other part of the ship section. As the free surface is considered, the shear stress of both sides near the free surface is close to zero and even sign changed.
文摘This paper praidrs a theurvtheal hasts for establishing the congergente of paraled interative and itratiee techaigues,for computing nmtrfied solution of Ar three A is a singal M-matrix,These results do not assuine A to irreducihle,A concrete relaxed parallet multixpla ting algorithin culled the parallel multispliting AOR algarithm is showed Findly,numericales amples are givep,arhleh show effertielve of parallel iterurise methods for singalar
基金Project(50475029, 50605015) supported by the National Natural Science Foundation of China
文摘New strain induced melt activated (new SIMA) method for preparing AZ91D magnesium alloy semi-solid billet is introduced by applying equal channel angular extrusion into strain induced step in SIMA method, by which semi-solid billet with fine spheroidal grains and average grain size of 18 μm can be prepared. Furthermore, average grain size of semi-solid billet is reduced with increasing extrusion pass of AZ91D magnesium alloy obtained in ECAE process. By using semi-solid billet prepared by new SIMA, thixoforged magazine plates component with high mechanical properties such as yield strength of 201.4 MPa, ultimate tensile strength of 321.8 MPa and elongation of 15.3%, can be obtained.
基金Project supported by the National Natural Science Foundation of China(No.10172038),the Doctoral Foundation ofthe National Education Ministry(No.20040487013)and the Natural Science Foundation of Guangxi(No.0339019).
文摘Based on the extended homogeneous capacity high precision integration method and the spectrum method of virtual boundary with a complex radius vector, a novel semi-analytical method, which has satisfactory computation efectiveness and precision, is presented for solving the acoustic radiation from a submerged infnite non-circular cylindrical shell stifened by longitudinal ribs by means of the Fourier integral transformation and stationary phase method. In this work, besides the normal interacting force, which is commonly adopted by some researchers, the other interacting forces and moments between the longitudinal ribs and the non-circular cylindrical shell are considered at the same time. The efects of the number and the size of the cross-section of longitudinal ribs on the characteristics of acoustic radiation are investigated. Numerical results show that the method proposed is more efcient than the existing mixed FE-BE method.
文摘By using Cauchy's integral formula of analytical complex function and the third order complex spline function, a general boundary solution method for solving the complex potential field of the flow field around a 2D semi infinite body is presented in this paper. The pressure coefficients obtained by the present method agree well with those given by Acrivous, showing the validity of our method.
基金This work was financially supported by the National Natural Science Foundation of China (No.50374014).
文摘In semi-solid forming process, preparing the slurry with rosette or globular microstructure is very important. A new approach named the damper cooling tube method （DCT）, to produce the semi-solid metal slurry, has been introduced. To optimize the technical parameters in designing the apparatus, the finite volume method was adopted to simulate the flow process. The temperature effects on the rheological properties of the slurries were also considered. The effects of the technical parameters on the slurry properties were studied in detail.
文摘Numerical simulation tools are required to describe large deformations of geomaterials for evaluating the risk of geo-disasters. This study focused on moving particle semi-implicit(MPS) method, which is a Lagrangian gridless particle method, and investigated its performance and stability to simulate large deformation of geomaterials. A calculation method was developed using geomaterials modeled as Bingham fluids to improve the original MPS method and enhance its stability. Two numerical tests showed that results from the improved MPS method was in good agreement with the theoretical value.Furthermore, numerical simulations were calibrated by laboratory experiments. It showed that the simulation results matched well with the experimentally observed free-surface configurations for flowing sand. In addition, the model could generally predict the time-history of the impact force. The MPS method could be a useful tool to evaluate large deformation of geomaterials.
文摘Semi_weight function method is developed to solve the plane problem of two bonded dissimilar materials containing a crack along the bond. From equilibrium equation, stress and strain relationship, conditions of continuity across interface and free crack surface, the stress and displacement fields were obtained. The eigenvalue of these fields is lambda. Semi_weight functions were obtained as virtual displacement and stress fields with eigenvalue?_lambda. Integral expression of fracture parameters, K Ⅰ and K Ⅱ, were obtained from reciprocal work theorem with semi_weight functions and approximate displacement and stress values on any integral path around crack tip. The calculation results of applications show that the semi_weight function method is a simple, convenient and high precision calculation method.
基金Project supported by the National Natural Science Foundation of China （Grant No. 10202013）
文摘The effect of axial shallow groove on the nonlinear dynamic response and buckling of laminated cylindrical shells subjected to radial compression loading was investigated. Based on the first-order shear deformation theory （FSDT）, the nonlinear dynamic equations involving the transverse shear deformation and initial geometric imperfections were derived with the Hamilton philosophy. The axial shallow groove of the laminated composite cylindrical shell was treated as the initial geometric imperfections in the dynamic equations. A semi-analytical method of expanding displacements and loads along the circumferential direction and employing the finite difference method along the axial direction and in the time domain is used to solve the governing equations and obtain the dynamic response of the laminated shell. The B-R criterion was employed to determine the critical loads of dynamic buckling of the shell. The effects of the parameters of the shallow groove on the dynamic response and buckling were discussed in this paper and the results show that the axial shallow grooves greatly affect the dynamic response and buckling.
基金Supported by the National Natural Science Fund(11061021)Supported by the Scientific Research Projection of Higher Schools of Inner Mongolia(NJZZ12011, NJ10006)+1 种基金Supported by the Program of Higher-level talents of Inner Mongolia University(125119)Supported by the Scientific Research Projection of Inner Mongolia University of Finance and Economics(KY1101)
文摘An H1-Galerkin expanded mixed finite element method is discussed for a class of second order semi-linear hyperbolic wave equations. By using the mixed formulation, we can get the optimal approximation for three variables: the scalar unknown, its gradient and its flux(coefficient times the gradient), simultaneously. We also prove the existence and uniqueness of semi-discrete solution. Finally, we obtain some numerical results to illustrate the efficiency of the method.
文摘Semi-inverse method, which is an integration and an extension of Hu's try-and-error method, Chien's veighted residual method and Liu's systematic method, is proposed to establish generalized variational principles with multi-variables without arty variational crisis phenomenon. The method is to construct an energy trial-functional with an unknown function F, which can be readily identified by making the trial-functional stationary and using known constraint equations. As a result generalized variational principles with two kinds of independent variables (such as well-known Hellinger-Reissner variational principle and Hu-Washizu principle) and generalized variational principles with three kinds of independent variables (such as Chien's generalized variational principles) in elasticity have been deduced without using Lagrange multiplier method. By semi-inverse method, the author has also proved that Hu-Washizu principle is actually a variational principle with only two kinds of independent variables, stress-strain relations are still its constraints.
文摘A Cauchy problem for the semi-linear elliptic equation is investigated. We use a filtering function method to define a regularization solution for this ill-posed problem. The existence, uniqueness and stability of the regularization solution are proven;a convergence estimate of H?lder type for the regularization method is obtained under the a-priori bound assumption for the exact solution. An iterative scheme is proposed to calculate the regularization solution;some numerical results show that this method works well.
基金Project supported by the National Natural Science Foundation of China(No.11402249)
文摘A radial crack emanating from a semi-circular notch is of significant engineering importance. Accurate determination of key fracture mechanics parameters is essential for damage tolerance design and fatigue crack growth life predictions. The purpose of this paper is to provide an efficient and accurate closed-form weight function approach to the calculation of crack surface displacements for a radial crack emanating from a semi-circular notch in a semi-infinite plate. Results are presented for two load conditions： remote applied stress and uniform stress segment applied to crack surfaces. Based on a correction of stress intensity factor ratio, highly accurate analytical equations of crack surface displacements under the two load conditions are developed by fitting the data obtained with the weight function method. It is demonstrated that the Wu- Carlsson closed-form weight functions are very efficient, accurate and easy-to-use for calculating crack surface displacements for arbitrary load conditions. The method will facilitate fatigue crack closure and other fracture mechanics analyses where accurate crack surface displacements are required.
基金Project1 990 1 0 0 6 supported by National Natural Science Foundation of China,Doctoral Foundation of China,Chi-na Scholarship council and Laboratory of Computational Physics in Beijing of Chinathe second author is also supportedby the State Major Key
文摘We discuss the incomplete semi-iterative method (ISIM) for an approximate solution of a linear fixed point equations x=Tx+c with a bounded linear operator T acting on a complex Banach space X such that its resolvent has a pole of order k at the point 1. Sufficient conditions for the convergence of ISIM to a solution of x=Tx+c, where c belongs to the range space of R(I-T) k, are established. We show that the ISIM has an attractive feature that it is usually convergent even when the spectral radius of the operator T is greater than 1 and Ind 1T≥1. Applications in finite Markov chain is considered and illustrative examples are reported, showing the convergence rate of the ISIM is very high.
文摘In this paper, an effective numerical method for physically nonlinear interaction analysis is studied, in which the elasto-plastic problem of coupled analysis between the structure and medium may be transformed into several linear problems by means of the perturbation technique, then, the finite strip method and finite layer method are used to analyze the underground structure and rock medium, respectively, for their corresponding linear problems, so the purpose of simplifying the calculation can be achieved. This kind of method has made use of the twice semi-analytical technique: the perturbation and semi-analytic solution function to simplify 3-D nonlinear coupled problem into 1-D linear numerical one. In addition, this method is a new advance of semi-analytical method in the application to nonlinear problems by means of combinating with the analytical perturbation method, and it is also a branch of the perturbational numerical method developed in last years.
文摘In the process of preparation of semi-solid metal materials, a variety of factors would influence the preparing time and the morphology of non-dendritic microstructure. The aim of this work is using phase-field method to simulate non-dendritic growth during preparation of AI-4Cu-Mg semi-solid alloy by electromagnetic stirring method （EMS method）. Several factors such as the disturbance intensity, anisotropy, the thickness of the interface and the ratio of diffusivity in solid and liquid were considered. It is shown that decreasing the thickness of the interface results in more circular outline of particles, and increasing the diffusivity in solid can reduce degree of microsegregation. The disturbance intensity in the model can be connected with current intensity of stator or magnetic induction density impressed. Simulation results show that the larger the disturbance intensity or magnetic induction density, the more globular morphology the original phase in the matrix.
