A flexible air electrode with excellent activity and stability is essential for flexible zinc-air batteries.In this study,we report the rational design of nitrogen-doped carbon nanotube-encapsulated Co9S8 nanopar-ticl...A flexible air electrode with excellent activity and stability is essential for flexible zinc-air batteries.In this study,we report the rational design of nitrogen-doped carbon nanotube-encapsulated Co9S8 nanopar-ticles on carbon cloth(Co9S8/NCNTs/CC),serving as self-supporting air electrodes for both liquid-state and flexible zinc-air batteries.The Co9S8/NCNTs/CC-1 exhibited a half-wave potential of 0.86 V for oxygen re-duction reaction(ORR)and achieved a current density of 10 mA cm-2 for oxygen evolution reaction(OER)at a voltage of only 1.52 V.The well-constructed nanotube on carbon cloth facilitates mass diffu-sion and electron transfer,while enhancing the mechanical flexibility of the material.Density functional theory(DFT)calculations suggested that the synergistic interaction between Co9S8 and NCNTs effectively enhanced the bifunctional electrocatalytic performance of the material.Liquid-state and flexible zinc-air batteries assembled with Co9S8/NCNTs/CC-1 demonstrated outstanding charge-discharge capabilities and long-term stability.展开更多
In this paper,we study the uniqueness of positive solutions to the following semilinear equations{-Δu=λ|x|^(α)ue^(u^(2)),in B_(1),u=0,onδB_(1)ueu2;in B_(1);u=0;on@B_(1);whereλ>0,α>-2;B_(1)denotes the unit ...In this paper,we study the uniqueness of positive solutions to the following semilinear equations{-Δu=λ|x|^(α)ue^(u^(2)),in B_(1),u=0,onδB_(1)ueu2;in B_(1);u=0;on@B_(1);whereλ>0,α>-2;B_(1)denotes the unit disk in R^(2):By delicate and relatively complicated computation of radial solutions to the above equation and the asymptotic expansion of solutions near the boundary of B_(1),the uniqueness of positive solutions is obtained.The results of this paper extend the uniqueness result for the semilinear equation with critical exponential growth in CHEN et al.(2022)to the case that includes a Henon term.展开更多
Interfacial superconductivity(IS)has been a topic of intense interest in condensed matter physics,due to its unique properties and exotic photoelectrical performance.However,there are few reports about IS systems cons...Interfacial superconductivity(IS)has been a topic of intense interest in condensed matter physics,due to its unique properties and exotic photoelectrical performance.However,there are few reports about IS systems consisting of two insulators.Here,motivated by the emergence of an insulator-metal transition in type-Ⅲ heterostructures and the superconductivity in some“special”two-dimensional(2D)semiconductors via electron doping,we predict that the 2D heterostructure SnSe_(2)/PtTe_(2) is a model system for realizing IS by using firstprinciples calculations.Our results show that due to slight but crucial interlayer charge transfer,SnSe_(2)/PtTe_(2) turns to be a type-Ⅲ heterostructure with metallic properties and shows a superconducting transition with the critical temperature(T_(c))of 3.73 K.Similar to the enhanced electron–phonon coupling(EPC)in the electrondoped SnSe_(2) monolayer,the IS in the SnSe_(2)/PtTe_(2) heterostructure mainly originates from the metallized SnSe_(2) layer.Furthermore,we find that its superconductivity is sensitive to tensile lattice strain,forming a domeshaped superconducting phase diagram.Remarkably,at 7%biaxial tensile strain,the superconducting T_(c) can increase more than twofold(8.80 K),resulting from softened acoustic phonons at the𝑀point and enhanced EPC strength.Our study provides a concrete example for realizing IS in type-Ⅲ heterostructures,which waits for future experimental verification.展开更多
Background:To determine whether initiating a glucagon-like peptide-1 receptor agonist(GLP-1 RA)within 3 months of type 2 diabetes(T2DM)diagnosis alters the subsequent risk of overall and site-specific cancer and wheth...Background:To determine whether initiating a glucagon-like peptide-1 receptor agonist(GLP-1 RA)within 3 months of type 2 diabetes(T2DM)diagnosis alters the subsequent risk of overall and site-specific cancer and whether this association differs by baseline body-mass index(BMI).Methods:This retrospective cohort study used electronic health records from the TriNetX U.S.research network.Adults aged 20 years or older diagnosed with T2DM between 2016 and 2024 were included if they received any hypoglycemic agents within 3 months before and after diagnosis.Following 1:1 propensity score matching,both the GLP-1 RA user and non-user groups included 183,264 patients.The study outcome was defined as a diagnosis of malignant neoplasms.Hazard ratios(HRs)for overall and site-specific cancer risk were estimated using Cox proportional hazards models.Kaplan–Meier analysis and stratified analysis by BMI were performed.Results:Early GLP-1 RA use demonstrated a modest but significant association with reduced overall cancer risk(HR 0.93;95%CI:0.90–0.96).Reduced risks were noted for cancers of the digestive(HR 0.81),respiratory(HR 0.66),and female genital(HR 0.87)systems.In stratified analysis,benefits were more pronounced in patients with BMI≥30,particularly for pancreatic and colorectal cancers.Conclusion:Early initiation of GLP-1 receptor agonists in patients with diagnosed T2DM was associated with a modest reduction in overall cancer risk,particularly among individuals with obesity.These findings highlight the dual metabolic and oncologic value of prompt GLP-1 RA therapy.展开更多
The flexible self-supporting electrode can maintain good mechanical and electrical properties while retaining high specific capacity,which meets the requirements of flexible batteries.Lithium-sulfur batteries(LSBs),as...The flexible self-supporting electrode can maintain good mechanical and electrical properties while retaining high specific capacity,which meets the requirements of flexible batteries.Lithium-sulfur batteries(LSBs),as a new generation of energy storage system,hold much higher theoretical energy density than traditional batteries,and they have attracted extensive attention from both the academic and industrial communities.Selection of a proper substrate material is important for the flexible self-supporting electrode.Carbon materials,with the advantages of light weight,high conductivity,strong structural plasticity,and low cost,provide the electrode with a large loading space for the active material and a conductive network.This makes the carbon materials meet the mechanical and electrochemical requirements of flexible electrodes.In this paper,the commonly used fabrication methods and recent research progresses of the flexible self-supporting cathode with a carbon material as the substrate are introduced.Various sulfur loading methods are summarized,which provides useful information for the structural design of the cathode.As the first review article of the carbon-based flexible self-supporting LSB cathodes,it provides valuable guidance for the researchers working in the field of LSB.展开更多
Stable non-noble metal bifunctional electrocatalysts are one of the challenges to the fluctuating overall water splitting driven by re-newable energy.Herein,a novel self-supporting hierarchically porous Ni_(x)Fe-S/NiF...Stable non-noble metal bifunctional electrocatalysts are one of the challenges to the fluctuating overall water splitting driven by re-newable energy.Herein,a novel self-supporting hierarchically porous Ni_(x)Fe-S/NiFe_(2)O_(4) heterostructure as bifunctional electrocatalyst was constructed based on porous Ni-Fe electrodeposition on three-dimensional(3D)carbon fiber cloth,in situ oxidation,and chemical sulfuration.Results showed that the Ni_(x)Fe-S/NiFe_(2)O_(4) heterostructure with a large specific surface area exhibits good bifunctional activity and stability for both hydrogen evolution reaction(HER)and oxygen evolution reaction(OER)because of the abundance of active sites,synergistic effect of the heterostructure,superhydrophilic surface,and stable,self-supporting structure.The results further confirmed that the Ni_(x)Fe-S phase in the heterostructure is transformed into metal oxides/hydroxides and Ni_(3)S_(2) during OER.Compared with the commercial 20wt%Pt/C||IrO_(2)-Ta_(2)O_(5) electrolyzer,the self-supporting Ni1/5Fe-S/NiFe_(2)O_(4)||Ni1/2Fe-S/NiFe_(2)O_(4) electrolyzer exhibits better stability and lower cell voltage in the fluctu-ating current density range of 10-500 mA/cm^(2).Particularly,the cell voltage of Ni1/5Fe-S/NiFe_(2)O_(4)||Ni1/2Fe-S/NiFe_(2)O_(4) is only approximately 3.91 V at an industrial current density of 500 mA/cm^(2),which is lower than that of the 20wt%Pt/C||IrO_(2)-Ta_(2)O_(5) electrolyzer(i.e.,approximately 4.79 V).This work provides a promising strategy to develop excellent bifunctional electrocatalysts for fluctuating overall water splitting.展开更多
Developing effective and practical electrocatalyst under industrial electrolysis conditions is critical for renewable hydrogen production.Herein,we report the self-supporting NiFe LDH-MoS_(x)integrated electrode for w...Developing effective and practical electrocatalyst under industrial electrolysis conditions is critical for renewable hydrogen production.Herein,we report the self-supporting NiFe LDH-MoS_(x)integrated electrode for water oxidation under normal alkaline test condition(1 M KOH at 25℃)and simulated industrial electrolysis conditions(5 M KOH at 65℃).Such optimized electrode exhibits excellent oxygen evolution reaction(OER)performance with overpotential of 195 and 290 mV at current density of 100 and 400 mA·cm^(-2)under normal alkaline test condition.Notably,only over-potential of 156 and 201 mV were required to achieve the current density of 100 and 400mA·cm^(-2)under simulated industrial electrolysis conditions.No significant degradations were observed after long-term durability tests for both conditions.When using in two-electrode system,the operational voltages of 1.44 and 1.72 V were required to achieve a current density of 10 and 100 mA·cm^(-2)for the overall water splitting test(NiFe LDH-MoS_(x)/INF||20%Pt/C).Additionally,the operational voltage of employing NiFe LDH-MoS_(x)/INF as both cathode and anode merely require 1.52 V at 50mA·cm^(-2)at simulated industrial electrolysis conditions.Notably,a membrane electrode assembly(MEA)for anion exchange membrane water electrolysis(AEMWEs)using NiFe LDH-MoS_(x)/INF as an anode catalyst exhibited an energy conversion efficiency of 71.8%at current density of 400 mA·cm^(-2)in 1 M KOH at 60℃.Further experimental results reveal that sulfurized substrate not only improved the conductivity of NiFe LDH,but also regulated its electronic configurations and atomic composition,leading to the excellent activity.The easy-obtained and cost-effective integrated electrodes are expected to meet the large-scale application of industrial water electrolysis.展开更多
Due to the important role of oil source in our life,the separation of water-in-oil emulsion is urgent and necessary.Membrane seperation technology has been an efficient and widely used method in separating oil-water s...Due to the important role of oil source in our life,the separation of water-in-oil emulsion is urgent and necessary.Membrane seperation technology has been an efficient and widely used method in separating oil-water separation.Herein,we report a versatile approach to fabricate surface carbonized membranes with self-standing property from biomass-derived precursor by synergistic charring of phytic acid,arginine and filter paper.The obtained membrane exhibited superhydrophobicity in oil,excellent fouling resistance,and self-supporting ability.The membrane can be cycle-used at least 12 times with high permeation flux(up to 1380 L·m^(-2)·h^(-1))and separation efficiency(up to 99.4%).展开更多
Metal sulfides with high theoretical capacities are expected as promising cathode materials of Al batteries(AIBs). However, powdery active materials are mainly synthesized and loaded on current collector by insulating...Metal sulfides with high theoretical capacities are expected as promising cathode materials of Al batteries(AIBs). However, powdery active materials are mainly synthesized and loaded on current collector by insulating binder without capacity. Meanwhile, S as inert element in metal sulfides can not usually provide capacity. So, powdery metal sulfides only exhibit limiting practical capacity and poor cycling stability due to weak conductivity and low mass utilization. Herein, the novel self-supporting and dual-active Co-S nanosheets on carbon cloth (i.e. Co-S/CC) with hierarchically porous structure are constructed as cathode of AIBs. Co-S nanosheets are derived from ZIF-67 nanosheets on CC by a facile ligand replacement reaction. As a result, the binder-free Co-S/CC cathode with good conductivity delivers excellent initial discharge capacity of 383.4 m Ah g^(-1)(0.211 m Ah cm^(-2)) at current density of 200 m A g^(-1)and maintain reversible capacity of 156.9 m Ah g^(-1)(0.086 m Ah cm^(-2)) with Coulombic efficiency of 95.8% after 500 cycles,which are much higher than those of the traditional slurry-coating cathodes. Both Co and S as active elements in Co-S/CC contribute to capacity, which leads to a high mass utilization. This work provides a significant strategy for the construction of self-supporting metallic cathode for advanced high-energy density Al battery.展开更多
The integration of topology optimization(TO)and additive manufacturing(AM)technologies can create significant synergy benefits,while the lack of AM-friendly TO algorithms is a serious bottleneck for the application of...The integration of topology optimization(TO)and additive manufacturing(AM)technologies can create significant synergy benefits,while the lack of AM-friendly TO algorithms is a serious bottleneck for the application of TO in AM.In this paper,a TO method is proposed to design self-supporting structures with an explicit continuous self-supporting constraint,which can be adaptively activated and tightened during the optimization procedure.The TO procedure is suitable for various critical overhang angles(COA),which is integrated with build direction assignment to reduce performance loss.Besides,a triangular directional self-supporting constraint sensitivity filter is devised to promote the downward evolution of structures and maintain stability.Two numerical examples are presented;all the test cases have successfully converged and the optimized solutions demonstrate good manufacturability.In the meanwhile,a fully self-supporting design can be obtained with a slight cost in performance through combination with build direction assignment.展开更多
Hard carbon stands out as the most promising candidate for anodes in sodium-ion battery.Nevertheless,addressing the challenges of low initial Coulombic efficiency and rate performance is crucial for practical applicat...Hard carbon stands out as the most promising candidate for anodes in sodium-ion battery.Nevertheless,addressing the challenges of low initial Coulombic efficiency and rate performance is crucial for practical applications.In this study,we employed a dimensionally designed approach,using six different biomass precursors,to preserve their inherent fine hierarchical morphological structures and appearances during the synthesis of selfsupporting carbon materials.Benefiting from its low-tortuosity structure that facilitates electron and ion transport,as well as its surface-enriched C=O functional groups and significant closed micropore areas,the obtained carbon material exhibits excellent electrochemical performance in sodium-ion storage,demonstrated by finite element simulation.Notably,the carbonized basswood exhibited a remarkable initial Coulombic efficiency of up to 92.4%and demonstrated outstanding rate performance,achieving a capacity of 223.3 mAh·g^(-1)at a high current density of2 A·g^(-1).In addition,thorough investigation was conducted on the influence of microstructure on the sodium storage behavior of hard carbon.Ex situ X-ray diffraction(XRD)was used to confirm that the capacity in the plateau region originates from interlayer insertion and closed-pore filling,which is consistent with the results obtained from smallangle X-ray scattering.These findings underscore the immense potential of leveraging surface functionalization and structural design to bolster the performance of hard carbon,paving the way for promising future advancements in this field.展开更多
High/medium entropy alloys(HEAs/MEAs)with high electrocatalytic activity have attracted great attention in water electrolysis applications.However,facile synthesis of self-supporting high/medium entropy alloys electro...High/medium entropy alloys(HEAs/MEAs)with high electrocatalytic activity have attracted great attention in water electrolysis applications.However,facile synthesis of self-supporting high/medium entropy alloys electrocatalysts with rich active sites through classical metallurgical methods is still a challenge.Here,a self-supporting porous FeCoNi MEA electrocatalyst with nanosheets-shaped surface for oxygen evolution reaction(OER)was prepared by a one-step electrochemical process from the metal oxides in molten CaCl_(2).The formation of the FeCoNi MEA is attributed to the oxides electro-reduction,high-temperature diffusion and solid solution.Additionally,the morphology and structure of the FeCoNi MEA can be precisely controlled by adjusting the electrolysis time and temperature.The electronic structure regulation and the reduced energy barrier of OER from the“cocktail effect”,the abundant exposed active sites brought by surface ultrathin nanosheets,the good electronic conductivity and electrochemical stability from the self-supporting structure enable the FeCoNi MEA electrode shows high-performance OER electrocatalysis,exhibiting a low overpotential of 233 mV at a current density of 10 mA cm^(-2),a low Tafel slope of 29.8 mV dec^(-1),and an excellent stability for over 500 h without any obvious structural destruction.This work demonstrates a facile one-step electrochemical metallurgical approach for fabricating self-supporting HEAs/MEAs electrocatalysts with nanosized surface for the application in water electrolysis.展开更多
A self-supporting T-shaped gate(SST-gate) GaN device and process method using electron beam lithography are proposed.An AlGaN/GaN high-electron-mobility transistor(HEMT) device with a gate length of 100 nm is fabricat...A self-supporting T-shaped gate(SST-gate) GaN device and process method using electron beam lithography are proposed.An AlGaN/GaN high-electron-mobility transistor(HEMT) device with a gate length of 100 nm is fabricated by this method.The current gain cutoff frequency(f_(T)) is 60 GHz,and the maximum oscillation frequency(f_(max)) is 104 GHz.The current collapse has improved by 13% at static bias of(V_(GSQ),V_(DSQ))=(-8 V,10 V),and gate manufacturing yield has improved by 17% compared with the traditional floating T-shaped gate(FT-gate) device.展开更多
Photo-responsive cholesteric liquid crystals(CLCs)have attracted much attention in recent years due to their wide applications in filters,tun able optical lasers,dyn amic display devices,etc.However,UV light is usuall...Photo-responsive cholesteric liquid crystals(CLCs)have attracted much attention in recent years due to their wide applications in filters,tun able optical lasers,dyn amic display devices,etc.However,UV light is usually used as the exter nal stimulus source,which is not envir on ment-frie ndly enough.On the other hand,the mecha nical properties of CLCs are not strong eno ugh for these practical applications.Therefore,it still remains a challenge to endow the CLCs with visible light response and high mechanical properties at the same time.Herein,an axially chiral tetra-fluorinated binaphthyl azobenzene gelator(S-4F-AG)is synthesized.Upon 550 and 450 nm light irradiations,S-4F-AG exhibits excellent photo-switchable behaviors.Notably,the maximum con tent of c/s-isomer and its half-life are as high as 35%and 89 h in acet on itrile,respectively.A self-supporting CLC physical gel with a storage modulus around 104 Pa can be obtained when 3wt%S-4F-AG and 12wt%binaphthyl azobenzene derivative(dopant 2)are co-doped into a nematic LC host P0616A.This CLC physical gel exhibits a temperature-driven blue,green,and red reflection colors reversibly.Importantly,such three primary RGB colors can also be realized by adjusting the exposure time of 550 nm green light.This work lays a solid foundation for the applications ranging from information storage to high-tech anticounterfeit.展开更多
Designing efficient and stable non-precious metal HER(hydrogen evolution reaction)electrocatalysts with high large current density adaptability is significant for industrial application of hydrogen production by water...Designing efficient and stable non-precious metal HER(hydrogen evolution reaction)electrocatalysts with high large current density adaptability is significant for industrial application of hydrogen production by water electrolysis.Herein,a facile strategy was developed to construct a multi-phase Ni3 P-Co_(2)P-(Ni-Co)film with self-supporting hierarchically micro/nano-porous structure by using bubble template method electrodeposition of self-supporting micro-porous Ni Co P film,oxygen-free annealing for phase separation producing Ni_(3)P-Ni-Co_(2)P-Co structure,and acid etching for constructing surface nano-porous structure.The effective active sites for HER was significantly increased due to the hierarchically micro/nano-porous structure,which not only enlarged the surface roughness,but enhanced the bubble detachment by improving the hydrophilicity.Meanwhile,the HER electrolysis durability was improved benefiting from the Ni_(3)P-Co_(2)P phases with high corrosion resistance(especially in acid solution)and the self-supporting film structure without binder.Consequently,the Ni Co P-OA-AE film exhibited high HER catalytic performance,which delivered a current density of 10 m A cm^(-2)at a low overpotential of 42.9 and 39.7 m V in 1 M KOH and 0.5 M H_(2)SO_(4),respectively.It also possessed high long-term electrolysis durability,and the cell voltage of water electrolysis using self-supporting porous Ni Co P-OA-AE||Ir O_(2)-Ta_(2)O_(5) electrolyzer at 500 m A cm^(-2)for 250 h in 0.5 M H_(2)SO_(4 )is only 2.9 V.展开更多
Synthesis of zeolite LTN (“Linde Type N”) was investigated under insertion of a SiO2-rich filtration residue (FR) from waste water cleaning of the silane production. A new synthesis procedure was therefore developed...Synthesis of zeolite LTN (“Linde Type N”) was investigated under insertion of a SiO2-rich filtration residue (FR) from waste water cleaning of the silane production. A new synthesis procedure was therefore developed applying a flotation mechanism with the aim to grow LTN in form of thin membrane like sheets. Preparation starts with preactivation of FR by slurrying first in alkaline solution, followed by an addition of aluminate solution and citric acid. The latter was added as suitable chelating agent for the initiation of the flotation process. In the course of these experiments, we succeeded in synthesizing zeo-lite LTN with more or less zeolite SOD as byproduct in the form of a stable compact membrane-like layer at low temperature of 60℃. The crystallization was performed under isotherm static conditions in an open reaction system without addition of organic templates as structure directing agents (OSDA’s). FR was utilized as a total substitute of sodium silicate in all experiments and an expansive pre-treatment procedure like calcinations was not needed. Furthermore, membrane formation with LTN of usual synthesis needs chemically functionalized supports. In contrast self-supporting membranous LTN layers were grown for the first time in the present study.展开更多
BACKGROUND Type Ⅱ diabetes mellitus(T2DM)has been associated with increased risk of colon cancer(CC)and worse prognosis in patients with metastases.The effects of T2DM on postoperative chemoresistance rate(CRR)and lo...BACKGROUND Type Ⅱ diabetes mellitus(T2DM)has been associated with increased risk of colon cancer(CC)and worse prognosis in patients with metastases.The effects of T2DM on postoperative chemoresistance rate(CRR)and long-term disease-free survival(DFS)and overall survival(OS)in patients with stage Ⅲ CC who receive curative resection remain controversial.AIM To investigate whether T2DM or glycemic control is associated with worse postoperative survival outcomes in stage Ⅲ CC.METHODS This retrospective cohort study included 278 patients aged 40-75 years who underwent surgery for stage Ⅲ CC from 2018 to 2021.Based on preoperative T2DM history,the patients were categorized into non-DM(n=160)and DM groups(n=118).The latter was further divided into well-controlled(n=73)and poorly controlled(n=45)groups depending on the status of glycemic control.DFS,OS,and CRR were compared between the groups and Cox regression analysis was used to identify risk factors.RESULTS Patients in the DM and non-DM groups demonstrated similar DFS,OS,and CRR(DFS:72.03%vs 78.75%,P=0.178;OS:81.36%vs 83.12%,P=0.638;CRR:14.41%vs 7.5%,P=0.063).Poorly controlled DM was associated with a significantly worse prognosis and higher CRR than well-controlled DM(DFS:62.22%vs 78.07%,P=0.021;OS:71.11%vs 87.67%,P=0.011;CRR:24.40%vs 8.22%,P=0.015).High preoperative fasting plasma glucose[DFS:Hazard ratio(HR)=2.684,P<0.001;OS:HR=2.105,P=0.019;CRR:HR=2.214,P=0.005]and glycosylated hemoglobin levels(DFS:HR=2.344,P=0.006;OS:HR=2.119,P=0.021;CRR:HR=2.449,P=0.009)indicated significantly poor prognosis and high CRR,while T2DM history did not(DFS:HR=1.178,P=0.327;OS:HR=0.933,P=0.739;CRR:HR=0.997,P=0.581).CONCLUSION Increased preoperative fasting plasma glucose and glycosylated hemoglobin levels,but not T2DM history,were identified as risk factors associated with poor postoperative outcomes and high CRR in patients with stage Ⅲ CC.展开更多
Flexible electrode design with robust structure and good performance is one of the priorities for flexible batteries to power emerging wearable electronics,and organic cathode materials have become contenders for flex...Flexible electrode design with robust structure and good performance is one of the priorities for flexible batteries to power emerging wearable electronics,and organic cathode materials have become contenders for flexible self-supporting electrodes.However,issues such as easy electrolyte solubility and low intrinsic conductivity contribute to high polarization and rapid capacity decay.Herein,we have designed a flexible self-supporting cathode based on perylene-3,4,9,10-tetracarboxylic dianhydride(PTCDA),interfacial engineering enhanced by polypyrrole(PPy),and carbon nanotubes(CNTs),forming the interconnected and flexible PTCDA/PPy/CNTs using polymerization reaction and vacuum filtration methods,effectively curbing those challenges.When used as the cathode of sodium-ion batteries,PTCDA/PPy/CNTs exhibit excellent rate capability(105.7 mAh g^(−1) at 20 C),outstanding cycling stability(79.4%capacity retention at 5 C after 500 cycles),and remarkable wide temperature application capability(86.5 mAh g^(−1) at−30℃ and 115.4 mAh g^(−1) at 60℃).The sodium storage mechanism was verified to be a reversible oxidation reaction between two Na+ions and carbonyl groups by density functional theory calculations,in situ infrared Fourier transform infrared spectroscopy,and in situ Raman spectroscopy.Surprisingly,the pouch cells based on PTCDA/PPy/CNTs exhibit good mechanical flexibility in various mechanical states.This work inspires more rational designs of flexible and self-supporting organic cathodes,promoting the development of high-performance and wide-temperature adaptable wearable electronic devices.展开更多
Taking B2C E-commerce enterprises as the center, it can be divided into a set of logistics activities upstream supply chain logistics producer to B2C e-commerce enterprises, and the B2C e-commerce enterprise logistics...Taking B2C E-commerce enterprises as the center, it can be divided into a set of logistics activities upstream supply chain logistics producer to B2C e-commerce enterprises, and the B2C e-commerce enterprise logistics to client consumer, and the paper focuses on the study of self-supporting logistics for the E-commerce enterprise. According to the development status of current B2C electronic commerce enterprise in our country and logistics, the paper study B2C electric business enterprise how to correctly choose the logistics mode and how to promote the business logistics operation level.展开更多
BACKGROUND Transforming growth factor-β(TGF-β)superfamily plays an important role in tumor progression and metastasis.Activin A receptor type 1C(ACVR1C)is a TGF-βtype I receptor that is involved in tumorigenesis th...BACKGROUND Transforming growth factor-β(TGF-β)superfamily plays an important role in tumor progression and metastasis.Activin A receptor type 1C(ACVR1C)is a TGF-βtype I receptor that is involved in tumorigenesis through binding to dif-ferent ligands.AIM To evaluate the correlation between single nucleotide polymorphisms(SNPs)of ACVR1C and susceptibility to esophageal squamous cell carcinoma(ESCC)in Chinese Han population.METHODS In this hospital-based cohort study,1043 ESCC patients and 1143 healthy controls were enrolled.Five SNPs(rs4664229,rs4556933,rs77886248,rs77263459,rs6734630)of ACVR1C were assessed by the ligation detection reaction method.Hardy-Weinberg equilibrium test,genetic model analysis,stratified analysis,linkage disequi-librium test,and haplotype analysis were conducted.RESULTS Participants carrying ACVR1C rs4556933 GA mutant had significantly decreased risk of ESCC,and those with rs77886248 TA mutant were related with higher risk,especially in older male smokers.In the haplotype analysis,ACVR1C Trs4664229Ars4556933Trs77886248Crs77263459Ars6734630 increased risk of ESCC,while Trs4664229Grs4556933Trs77886248Crs77263459Ars6734630 was associated with lower susceptibility to ESCC.CONCLUSION ACVR1C rs4556933 and rs77886248 SNPs were associated with the susceptibility to ESCC,which could provide a potential target for early diagnosis and treatment of ESCC in Chinese Han population.展开更多
基金supported by the Natural Sci-ence Foundation of Xinjiang Uygur Autonomous Region(Nos.2022D01E36 and 2022D01E38)the National Natural Science Foun-dation of China(Nos.22369016 and 22065034)the Outstand-ing Doctoral Student Innovation Project of Xinjiang University(No.XJU2024BS055).
文摘A flexible air electrode with excellent activity and stability is essential for flexible zinc-air batteries.In this study,we report the rational design of nitrogen-doped carbon nanotube-encapsulated Co9S8 nanopar-ticles on carbon cloth(Co9S8/NCNTs/CC),serving as self-supporting air electrodes for both liquid-state and flexible zinc-air batteries.The Co9S8/NCNTs/CC-1 exhibited a half-wave potential of 0.86 V for oxygen re-duction reaction(ORR)and achieved a current density of 10 mA cm-2 for oxygen evolution reaction(OER)at a voltage of only 1.52 V.The well-constructed nanotube on carbon cloth facilitates mass diffu-sion and electron transfer,while enhancing the mechanical flexibility of the material.Density functional theory(DFT)calculations suggested that the synergistic interaction between Co9S8 and NCNTs effectively enhanced the bifunctional electrocatalytic performance of the material.Liquid-state and flexible zinc-air batteries assembled with Co9S8/NCNTs/CC-1 demonstrated outstanding charge-discharge capabilities and long-term stability.
基金Supported by the Natural Science Foundation of China(12571122,12061010)。
文摘In this paper,we study the uniqueness of positive solutions to the following semilinear equations{-Δu=λ|x|^(α)ue^(u^(2)),in B_(1),u=0,onδB_(1)ueu2;in B_(1);u=0;on@B_(1);whereλ>0,α>-2;B_(1)denotes the unit disk in R^(2):By delicate and relatively complicated computation of radial solutions to the above equation and the asymptotic expansion of solutions near the boundary of B_(1),the uniqueness of positive solutions is obtained.The results of this paper extend the uniqueness result for the semilinear equation with critical exponential growth in CHEN et al.(2022)to the case that includes a Henon term.
基金supported by the National Key R&D Program of China (Grant Nos.2022YFA1403103 and 2019YFA0308603)the National Natural Science Foundation of China (Grant No.12304167)the Shandong Provincial Natural Science Foundation of China (Grant No.ZR2023QA020)。
文摘Interfacial superconductivity(IS)has been a topic of intense interest in condensed matter physics,due to its unique properties and exotic photoelectrical performance.However,there are few reports about IS systems consisting of two insulators.Here,motivated by the emergence of an insulator-metal transition in type-Ⅲ heterostructures and the superconductivity in some“special”two-dimensional(2D)semiconductors via electron doping,we predict that the 2D heterostructure SnSe_(2)/PtTe_(2) is a model system for realizing IS by using firstprinciples calculations.Our results show that due to slight but crucial interlayer charge transfer,SnSe_(2)/PtTe_(2) turns to be a type-Ⅲ heterostructure with metallic properties and shows a superconducting transition with the critical temperature(T_(c))of 3.73 K.Similar to the enhanced electron–phonon coupling(EPC)in the electrondoped SnSe_(2) monolayer,the IS in the SnSe_(2)/PtTe_(2) heterostructure mainly originates from the metallized SnSe_(2) layer.Furthermore,we find that its superconductivity is sensitive to tensile lattice strain,forming a domeshaped superconducting phase diagram.Remarkably,at 7%biaxial tensile strain,the superconducting T_(c) can increase more than twofold(8.80 K),resulting from softened acoustic phonons at the𝑀point and enhanced EPC strength.Our study provides a concrete example for realizing IS in type-Ⅲ heterostructures,which waits for future experimental verification.
基金financial support fromthe Chung Shan Medical University Hospital,Taiwan(CSH-2022-A-009).
文摘Background:To determine whether initiating a glucagon-like peptide-1 receptor agonist(GLP-1 RA)within 3 months of type 2 diabetes(T2DM)diagnosis alters the subsequent risk of overall and site-specific cancer and whether this association differs by baseline body-mass index(BMI).Methods:This retrospective cohort study used electronic health records from the TriNetX U.S.research network.Adults aged 20 years or older diagnosed with T2DM between 2016 and 2024 were included if they received any hypoglycemic agents within 3 months before and after diagnosis.Following 1:1 propensity score matching,both the GLP-1 RA user and non-user groups included 183,264 patients.The study outcome was defined as a diagnosis of malignant neoplasms.Hazard ratios(HRs)for overall and site-specific cancer risk were estimated using Cox proportional hazards models.Kaplan–Meier analysis and stratified analysis by BMI were performed.Results:Early GLP-1 RA use demonstrated a modest but significant association with reduced overall cancer risk(HR 0.93;95%CI:0.90–0.96).Reduced risks were noted for cancers of the digestive(HR 0.81),respiratory(HR 0.66),and female genital(HR 0.87)systems.In stratified analysis,benefits were more pronounced in patients with BMI≥30,particularly for pancreatic and colorectal cancers.Conclusion:Early initiation of GLP-1 receptor agonists in patients with diagnosed T2DM was associated with a modest reduction in overall cancer risk,particularly among individuals with obesity.These findings highlight the dual metabolic and oncologic value of prompt GLP-1 RA therapy.
基金The authors acknowledge the financial support from the National Natural Science Foundation of China(Nos.21978110 and 51772126)the Natural Science Foundation of Beijing Municipal(No.L182062)+6 种基金the Talents Project of Beijing Municipal Committee Organization Department(No.2018000021223ZK21)the Yue Qi Young Scholar Project of China University of Mining&Technology(Beijing)(No.2017QN17)the Fundamental Research Funds for the Central Universities(No.2020XJJD01 and 2020YJSJD01)Jilin Province Science and Technology Department Program(Nos.20200201187JC and 20190101009JH)the"13th five‐year"Science and Technology Project of Jilin Provincial Education Department(No.JJKH20200407KJ)Jilin Province Development and Reform Commission Program(No.2020C026‐3)Jilin Province Fund for Talent Development Program(No.[2019]874).
文摘The flexible self-supporting electrode can maintain good mechanical and electrical properties while retaining high specific capacity,which meets the requirements of flexible batteries.Lithium-sulfur batteries(LSBs),as a new generation of energy storage system,hold much higher theoretical energy density than traditional batteries,and they have attracted extensive attention from both the academic and industrial communities.Selection of a proper substrate material is important for the flexible self-supporting electrode.Carbon materials,with the advantages of light weight,high conductivity,strong structural plasticity,and low cost,provide the electrode with a large loading space for the active material and a conductive network.This makes the carbon materials meet the mechanical and electrochemical requirements of flexible electrodes.In this paper,the commonly used fabrication methods and recent research progresses of the flexible self-supporting cathode with a carbon material as the substrate are introduced.Various sulfur loading methods are summarized,which provides useful information for the structural design of the cathode.As the first review article of the carbon-based flexible self-supporting LSB cathodes,it provides valuable guidance for the researchers working in the field of LSB.
基金financially supported by the National Natural Science Foundation of China (Nos. 51874020 and 52004022)
文摘Stable non-noble metal bifunctional electrocatalysts are one of the challenges to the fluctuating overall water splitting driven by re-newable energy.Herein,a novel self-supporting hierarchically porous Ni_(x)Fe-S/NiFe_(2)O_(4) heterostructure as bifunctional electrocatalyst was constructed based on porous Ni-Fe electrodeposition on three-dimensional(3D)carbon fiber cloth,in situ oxidation,and chemical sulfuration.Results showed that the Ni_(x)Fe-S/NiFe_(2)O_(4) heterostructure with a large specific surface area exhibits good bifunctional activity and stability for both hydrogen evolution reaction(HER)and oxygen evolution reaction(OER)because of the abundance of active sites,synergistic effect of the heterostructure,superhydrophilic surface,and stable,self-supporting structure.The results further confirmed that the Ni_(x)Fe-S phase in the heterostructure is transformed into metal oxides/hydroxides and Ni_(3)S_(2) during OER.Compared with the commercial 20wt%Pt/C||IrO_(2)-Ta_(2)O_(5) electrolyzer,the self-supporting Ni1/5Fe-S/NiFe_(2)O_(4)||Ni1/2Fe-S/NiFe_(2)O_(4) electrolyzer exhibits better stability and lower cell voltage in the fluctu-ating current density range of 10-500 mA/cm^(2).Particularly,the cell voltage of Ni1/5Fe-S/NiFe_(2)O_(4)||Ni1/2Fe-S/NiFe_(2)O_(4) is only approximately 3.91 V at an industrial current density of 500 mA/cm^(2),which is lower than that of the 20wt%Pt/C||IrO_(2)-Ta_(2)O_(5) electrolyzer(i.e.,approximately 4.79 V).This work provides a promising strategy to develop excellent bifunctional electrocatalysts for fluctuating overall water splitting.
文摘Developing effective and practical electrocatalyst under industrial electrolysis conditions is critical for renewable hydrogen production.Herein,we report the self-supporting NiFe LDH-MoS_(x)integrated electrode for water oxidation under normal alkaline test condition(1 M KOH at 25℃)and simulated industrial electrolysis conditions(5 M KOH at 65℃).Such optimized electrode exhibits excellent oxygen evolution reaction(OER)performance with overpotential of 195 and 290 mV at current density of 100 and 400 mA·cm^(-2)under normal alkaline test condition.Notably,only over-potential of 156 and 201 mV were required to achieve the current density of 100 and 400mA·cm^(-2)under simulated industrial electrolysis conditions.No significant degradations were observed after long-term durability tests for both conditions.When using in two-electrode system,the operational voltages of 1.44 and 1.72 V were required to achieve a current density of 10 and 100 mA·cm^(-2)for the overall water splitting test(NiFe LDH-MoS_(x)/INF||20%Pt/C).Additionally,the operational voltage of employing NiFe LDH-MoS_(x)/INF as both cathode and anode merely require 1.52 V at 50mA·cm^(-2)at simulated industrial electrolysis conditions.Notably,a membrane electrode assembly(MEA)for anion exchange membrane water electrolysis(AEMWEs)using NiFe LDH-MoS_(x)/INF as an anode catalyst exhibited an energy conversion efficiency of 71.8%at current density of 400 mA·cm^(-2)in 1 M KOH at 60℃.Further experimental results reveal that sulfurized substrate not only improved the conductivity of NiFe LDH,but also regulated its electronic configurations and atomic composition,leading to the excellent activity.The easy-obtained and cost-effective integrated electrodes are expected to meet the large-scale application of industrial water electrolysis.
基金financially supported by the National Natural Science Foundation of China(Nos.21875147 and 51991351)the Fundamental Research Funds for the Central Universities。
文摘Due to the important role of oil source in our life,the separation of water-in-oil emulsion is urgent and necessary.Membrane seperation technology has been an efficient and widely used method in separating oil-water separation.Herein,we report a versatile approach to fabricate surface carbonized membranes with self-standing property from biomass-derived precursor by synergistic charring of phytic acid,arginine and filter paper.The obtained membrane exhibited superhydrophobicity in oil,excellent fouling resistance,and self-supporting ability.The membrane can be cycle-used at least 12 times with high permeation flux(up to 1380 L·m^(-2)·h^(-1))and separation efficiency(up to 99.4%).
基金supported by the National Natural Science Foundation of China (51874020 and 52004022)the Fundamental Research Funds for the Central Universities (FRF-IP-19-001)。
文摘Metal sulfides with high theoretical capacities are expected as promising cathode materials of Al batteries(AIBs). However, powdery active materials are mainly synthesized and loaded on current collector by insulating binder without capacity. Meanwhile, S as inert element in metal sulfides can not usually provide capacity. So, powdery metal sulfides only exhibit limiting practical capacity and poor cycling stability due to weak conductivity and low mass utilization. Herein, the novel self-supporting and dual-active Co-S nanosheets on carbon cloth (i.e. Co-S/CC) with hierarchically porous structure are constructed as cathode of AIBs. Co-S nanosheets are derived from ZIF-67 nanosheets on CC by a facile ligand replacement reaction. As a result, the binder-free Co-S/CC cathode with good conductivity delivers excellent initial discharge capacity of 383.4 m Ah g^(-1)(0.211 m Ah cm^(-2)) at current density of 200 m A g^(-1)and maintain reversible capacity of 156.9 m Ah g^(-1)(0.086 m Ah cm^(-2)) with Coulombic efficiency of 95.8% after 500 cycles,which are much higher than those of the traditional slurry-coating cathodes. Both Co and S as active elements in Co-S/CC contribute to capacity, which leads to a high mass utilization. This work provides a significant strategy for the construction of self-supporting metallic cathode for advanced high-energy density Al battery.
基金supported by the National Key Research and Development Program of China(2018YFB1106303)Scientific Research Foundation of CAUC(2017QD10S).
文摘The integration of topology optimization(TO)and additive manufacturing(AM)technologies can create significant synergy benefits,while the lack of AM-friendly TO algorithms is a serious bottleneck for the application of TO in AM.In this paper,a TO method is proposed to design self-supporting structures with an explicit continuous self-supporting constraint,which can be adaptively activated and tightened during the optimization procedure.The TO procedure is suitable for various critical overhang angles(COA),which is integrated with build direction assignment to reduce performance loss.Besides,a triangular directional self-supporting constraint sensitivity filter is devised to promote the downward evolution of structures and maintain stability.Two numerical examples are presented;all the test cases have successfully converged and the optimized solutions demonstrate good manufacturability.In the meanwhile,a fully self-supporting design can be obtained with a slight cost in performance through combination with build direction assignment.
基金financially supported by the National Natural Science Foundation of China(Nos.32171709 and 32271791)China Postdoctoral Science Foundation(No.2023M743972)。
文摘Hard carbon stands out as the most promising candidate for anodes in sodium-ion battery.Nevertheless,addressing the challenges of low initial Coulombic efficiency and rate performance is crucial for practical applications.In this study,we employed a dimensionally designed approach,using six different biomass precursors,to preserve their inherent fine hierarchical morphological structures and appearances during the synthesis of selfsupporting carbon materials.Benefiting from its low-tortuosity structure that facilitates electron and ion transport,as well as its surface-enriched C=O functional groups and significant closed micropore areas,the obtained carbon material exhibits excellent electrochemical performance in sodium-ion storage,demonstrated by finite element simulation.Notably,the carbonized basswood exhibited a remarkable initial Coulombic efficiency of up to 92.4%and demonstrated outstanding rate performance,achieving a capacity of 223.3 mAh·g^(-1)at a high current density of2 A·g^(-1).In addition,thorough investigation was conducted on the influence of microstructure on the sodium storage behavior of hard carbon.Ex situ X-ray diffraction(XRD)was used to confirm that the capacity in the plateau region originates from interlayer insertion and closed-pore filling,which is consistent with the results obtained from smallangle X-ray scattering.These findings underscore the immense potential of leveraging surface functionalization and structural design to bolster the performance of hard carbon,paving the way for promising future advancements in this field.
基金supported by the National Natural Science Foundation of China(Nos.52022054,51974181,52004155,52004157,52374307,52304331,52334009)the National Key Research and Development Program of China(No.2022YFC2906100)+4 种基金the China Postdoctoral Science Foundation(No.2022M712023)the Science and Technology Commission of Shanghai Municipality(No.21DZ1208900)the Innovation Program of Shanghai Municipal Education Commission(No.2023ZKZD48)the Program for Professor of Special Appointment(Eastern Scholar)at Shanghai Institutions of Higher Learning(No.TP2019041)the“Shuguang Program”supported by the Shanghai Education Development Foundation and the Shanghai Municipal Education Commission(No.21SG42).
文摘High/medium entropy alloys(HEAs/MEAs)with high electrocatalytic activity have attracted great attention in water electrolysis applications.However,facile synthesis of self-supporting high/medium entropy alloys electrocatalysts with rich active sites through classical metallurgical methods is still a challenge.Here,a self-supporting porous FeCoNi MEA electrocatalyst with nanosheets-shaped surface for oxygen evolution reaction(OER)was prepared by a one-step electrochemical process from the metal oxides in molten CaCl_(2).The formation of the FeCoNi MEA is attributed to the oxides electro-reduction,high-temperature diffusion and solid solution.Additionally,the morphology and structure of the FeCoNi MEA can be precisely controlled by adjusting the electrolysis time and temperature.The electronic structure regulation and the reduced energy barrier of OER from the“cocktail effect”,the abundant exposed active sites brought by surface ultrathin nanosheets,the good electronic conductivity and electrochemical stability from the self-supporting structure enable the FeCoNi MEA electrode shows high-performance OER electrocatalysis,exhibiting a low overpotential of 233 mV at a current density of 10 mA cm^(-2),a low Tafel slope of 29.8 mV dec^(-1),and an excellent stability for over 500 h without any obvious structural destruction.This work demonstrates a facile one-step electrochemical metallurgical approach for fabricating self-supporting HEAs/MEAs electrocatalysts with nanosized surface for the application in water electrolysis.
基金Project supported by the National Natural Science Foundation of China(Grant No.62188102)the Natural Science Basic Research Program of Shaanxi Province,China(Grant No.2022JM-316)the Fund from the Ministry of Education of China(Grant No.8091B042112)。
文摘A self-supporting T-shaped gate(SST-gate) GaN device and process method using electron beam lithography are proposed.An AlGaN/GaN high-electron-mobility transistor(HEMT) device with a gate length of 100 nm is fabricated by this method.The current gain cutoff frequency(f_(T)) is 60 GHz,and the maximum oscillation frequency(f_(max)) is 104 GHz.The current collapse has improved by 13% at static bias of(V_(GSQ),V_(DSQ))=(-8 V,10 V),and gate manufacturing yield has improved by 17% compared with the traditional floating T-shaped gate(FT-gate) device.
文摘Photo-responsive cholesteric liquid crystals(CLCs)have attracted much attention in recent years due to their wide applications in filters,tun able optical lasers,dyn amic display devices,etc.However,UV light is usually used as the exter nal stimulus source,which is not envir on ment-frie ndly enough.On the other hand,the mecha nical properties of CLCs are not strong eno ugh for these practical applications.Therefore,it still remains a challenge to endow the CLCs with visible light response and high mechanical properties at the same time.Herein,an axially chiral tetra-fluorinated binaphthyl azobenzene gelator(S-4F-AG)is synthesized.Upon 550 and 450 nm light irradiations,S-4F-AG exhibits excellent photo-switchable behaviors.Notably,the maximum con tent of c/s-isomer and its half-life are as high as 35%and 89 h in acet on itrile,respectively.A self-supporting CLC physical gel with a storage modulus around 104 Pa can be obtained when 3wt%S-4F-AG and 12wt%binaphthyl azobenzene derivative(dopant 2)are co-doped into a nematic LC host P0616A.This CLC physical gel exhibits a temperature-driven blue,green,and red reflection colors reversibly.Importantly,such three primary RGB colors can also be realized by adjusting the exposure time of 550 nm green light.This work lays a solid foundation for the applications ranging from information storage to high-tech anticounterfeit.
基金supported by the National Natural Science Foundation of China(Nos.51804023 and 51874020)the Fundamental Research Funds for the Central Universities(Nos.FRF-TP-18-007A1)+1 种基金the China Postdoctoral Science Foundation(Nos.2019M650489 and 2019T120046)Taishan Scholars Program(No.tsqn201909087)。
文摘Designing efficient and stable non-precious metal HER(hydrogen evolution reaction)electrocatalysts with high large current density adaptability is significant for industrial application of hydrogen production by water electrolysis.Herein,a facile strategy was developed to construct a multi-phase Ni3 P-Co_(2)P-(Ni-Co)film with self-supporting hierarchically micro/nano-porous structure by using bubble template method electrodeposition of self-supporting micro-porous Ni Co P film,oxygen-free annealing for phase separation producing Ni_(3)P-Ni-Co_(2)P-Co structure,and acid etching for constructing surface nano-porous structure.The effective active sites for HER was significantly increased due to the hierarchically micro/nano-porous structure,which not only enlarged the surface roughness,but enhanced the bubble detachment by improving the hydrophilicity.Meanwhile,the HER electrolysis durability was improved benefiting from the Ni_(3)P-Co_(2)P phases with high corrosion resistance(especially in acid solution)and the self-supporting film structure without binder.Consequently,the Ni Co P-OA-AE film exhibited high HER catalytic performance,which delivered a current density of 10 m A cm^(-2)at a low overpotential of 42.9 and 39.7 m V in 1 M KOH and 0.5 M H_(2)SO_(4),respectively.It also possessed high long-term electrolysis durability,and the cell voltage of water electrolysis using self-supporting porous Ni Co P-OA-AE||Ir O_(2)-Ta_(2)O_(5) electrolyzer at 500 m A cm^(-2)for 250 h in 0.5 M H_(2)SO_(4 )is only 2.9 V.
文摘Synthesis of zeolite LTN (“Linde Type N”) was investigated under insertion of a SiO2-rich filtration residue (FR) from waste water cleaning of the silane production. A new synthesis procedure was therefore developed applying a flotation mechanism with the aim to grow LTN in form of thin membrane like sheets. Preparation starts with preactivation of FR by slurrying first in alkaline solution, followed by an addition of aluminate solution and citric acid. The latter was added as suitable chelating agent for the initiation of the flotation process. In the course of these experiments, we succeeded in synthesizing zeo-lite LTN with more or less zeolite SOD as byproduct in the form of a stable compact membrane-like layer at low temperature of 60℃. The crystallization was performed under isotherm static conditions in an open reaction system without addition of organic templates as structure directing agents (OSDA’s). FR was utilized as a total substitute of sodium silicate in all experiments and an expansive pre-treatment procedure like calcinations was not needed. Furthermore, membrane formation with LTN of usual synthesis needs chemically functionalized supports. In contrast self-supporting membranous LTN layers were grown for the first time in the present study.
基金Supported by the Leading Innovation Specialist Support Program of Guangdong Provincethe Science and Technology Planning Project of Ganzhou,No.202101074816the National Natural Science Foundation of China,No.82260501.
文摘BACKGROUND Type Ⅱ diabetes mellitus(T2DM)has been associated with increased risk of colon cancer(CC)and worse prognosis in patients with metastases.The effects of T2DM on postoperative chemoresistance rate(CRR)and long-term disease-free survival(DFS)and overall survival(OS)in patients with stage Ⅲ CC who receive curative resection remain controversial.AIM To investigate whether T2DM or glycemic control is associated with worse postoperative survival outcomes in stage Ⅲ CC.METHODS This retrospective cohort study included 278 patients aged 40-75 years who underwent surgery for stage Ⅲ CC from 2018 to 2021.Based on preoperative T2DM history,the patients were categorized into non-DM(n=160)and DM groups(n=118).The latter was further divided into well-controlled(n=73)and poorly controlled(n=45)groups depending on the status of glycemic control.DFS,OS,and CRR were compared between the groups and Cox regression analysis was used to identify risk factors.RESULTS Patients in the DM and non-DM groups demonstrated similar DFS,OS,and CRR(DFS:72.03%vs 78.75%,P=0.178;OS:81.36%vs 83.12%,P=0.638;CRR:14.41%vs 7.5%,P=0.063).Poorly controlled DM was associated with a significantly worse prognosis and higher CRR than well-controlled DM(DFS:62.22%vs 78.07%,P=0.021;OS:71.11%vs 87.67%,P=0.011;CRR:24.40%vs 8.22%,P=0.015).High preoperative fasting plasma glucose[DFS:Hazard ratio(HR)=2.684,P<0.001;OS:HR=2.105,P=0.019;CRR:HR=2.214,P=0.005]and glycosylated hemoglobin levels(DFS:HR=2.344,P=0.006;OS:HR=2.119,P=0.021;CRR:HR=2.449,P=0.009)indicated significantly poor prognosis and high CRR,while T2DM history did not(DFS:HR=1.178,P=0.327;OS:HR=0.933,P=0.739;CRR:HR=0.997,P=0.581).CONCLUSION Increased preoperative fasting plasma glucose and glycosylated hemoglobin levels,but not T2DM history,were identified as risk factors associated with poor postoperative outcomes and high CRR in patients with stage Ⅲ CC.
基金Shuangqiang Chen gratefully acknowledges the NationalNatural Science Foundation ofChina(21975154,22179078)Zhejiang Provincial Natural Science Founda-tion of China(LY24E020002)+3 种基金Shanghai MunicipalEducation Commission(Innovation Program:2019-01-07-00-09-E00021)the Innovative Research Team of High-level Local Universities in Shanghai.Bing Sunwould like to thank the financial support from ARCthrough the ARC Future Fellowship(FT220100561)YaoXiao would like to thank the financial support from theNatural Science Foundation of Zhejiang Province(LQ23E020002)the Wenzhou Key Scientific andTechnological Innovation Research Project(ZG2023053)
文摘Flexible electrode design with robust structure and good performance is one of the priorities for flexible batteries to power emerging wearable electronics,and organic cathode materials have become contenders for flexible self-supporting electrodes.However,issues such as easy electrolyte solubility and low intrinsic conductivity contribute to high polarization and rapid capacity decay.Herein,we have designed a flexible self-supporting cathode based on perylene-3,4,9,10-tetracarboxylic dianhydride(PTCDA),interfacial engineering enhanced by polypyrrole(PPy),and carbon nanotubes(CNTs),forming the interconnected and flexible PTCDA/PPy/CNTs using polymerization reaction and vacuum filtration methods,effectively curbing those challenges.When used as the cathode of sodium-ion batteries,PTCDA/PPy/CNTs exhibit excellent rate capability(105.7 mAh g^(−1) at 20 C),outstanding cycling stability(79.4%capacity retention at 5 C after 500 cycles),and remarkable wide temperature application capability(86.5 mAh g^(−1) at−30℃ and 115.4 mAh g^(−1) at 60℃).The sodium storage mechanism was verified to be a reversible oxidation reaction between two Na+ions and carbonyl groups by density functional theory calculations,in situ infrared Fourier transform infrared spectroscopy,and in situ Raman spectroscopy.Surprisingly,the pouch cells based on PTCDA/PPy/CNTs exhibit good mechanical flexibility in various mechanical states.This work inspires more rational designs of flexible and self-supporting organic cathodes,promoting the development of high-performance and wide-temperature adaptable wearable electronic devices.
文摘Taking B2C E-commerce enterprises as the center, it can be divided into a set of logistics activities upstream supply chain logistics producer to B2C e-commerce enterprises, and the B2C e-commerce enterprise logistics to client consumer, and the paper focuses on the study of self-supporting logistics for the E-commerce enterprise. According to the development status of current B2C electronic commerce enterprise in our country and logistics, the paper study B2C electric business enterprise how to correctly choose the logistics mode and how to promote the business logistics operation level.
基金Supported by The National Natural Science Foundation of China,No.82350127 and No.82241013the Shanghai Natural Science Foundation,No.20ZR1411600+2 种基金the Shanghai Shenkang Hospital Development Center,No.SHDC2020CR4039the Bethune Ethicon Excellent Surgery Foundation,No.CESS2021TC04Xuhui District Medical Research Project of Shanghai,No.SHXH201805.
文摘BACKGROUND Transforming growth factor-β(TGF-β)superfamily plays an important role in tumor progression and metastasis.Activin A receptor type 1C(ACVR1C)is a TGF-βtype I receptor that is involved in tumorigenesis through binding to dif-ferent ligands.AIM To evaluate the correlation between single nucleotide polymorphisms(SNPs)of ACVR1C and susceptibility to esophageal squamous cell carcinoma(ESCC)in Chinese Han population.METHODS In this hospital-based cohort study,1043 ESCC patients and 1143 healthy controls were enrolled.Five SNPs(rs4664229,rs4556933,rs77886248,rs77263459,rs6734630)of ACVR1C were assessed by the ligation detection reaction method.Hardy-Weinberg equilibrium test,genetic model analysis,stratified analysis,linkage disequi-librium test,and haplotype analysis were conducted.RESULTS Participants carrying ACVR1C rs4556933 GA mutant had significantly decreased risk of ESCC,and those with rs77886248 TA mutant were related with higher risk,especially in older male smokers.In the haplotype analysis,ACVR1C Trs4664229Ars4556933Trs77886248Crs77263459Ars6734630 increased risk of ESCC,while Trs4664229Grs4556933Trs77886248Crs77263459Ars6734630 was associated with lower susceptibility to ESCC.CONCLUSION ACVR1C rs4556933 and rs77886248 SNPs were associated with the susceptibility to ESCC,which could provide a potential target for early diagnosis and treatment of ESCC in Chinese Han population.
