Single-junction,lattice-mismatched In0.69Ga0.31As thermophotovoltaic（TPV） devices each with a bandgap of 0.6 eV are grown on InP substrate by metal-organic chemical vapour deposition（MOCVD）.Compositionally undulat...Single-junction,lattice-mismatched In0.69Ga0.31As thermophotovoltaic（TPV） devices each with a bandgap of 0.6 eV are grown on InP substrate by metal-organic chemical vapour deposition（MOCVD）.Compositionally undulating stepgraded InAsyP1-y buffer layers with a lattice mismatch of ～1.2% are used to mitigate the effect of lattice mismatch between the device layers and the InP substrate.With an optimized buffer thickness,the In0.69Ga0.31As active layers grown on the buffer display a high crystal quality with no measurable tetragonal distortion.High-performance single-junction devices are demonstrated,with an open-circuit voltage of 0.215 V and a photovoltaic conversion efficiency of 6.9% at a short-circuit current density of 47.6 mA/cm2,which are measured under the standard solar simulator of air mass 1.5-global（AM 1.5 G）.展开更多
The enhanced performance of a squaraine compound, with 2,4-bis[4-（N,N-diisobutylamino）-2,6-dihydroxyphenyl] squaraine as the donor and [6,6]-phenyl-C71-butyric acid methyl ester （PC71BM） as the acceptor, in soluti...The enhanced performance of a squaraine compound, with 2,4-bis[4-（N,N-diisobutylamino）-2,6-dihydroxyphenyl] squaraine as the donor and [6,6]-phenyl-C71-butyric acid methyl ester （PC71BM） as the acceptor, in solution-processed or- ganic photovoltaic devices is obtained by using UV-ozone-treated MoO3 as the hole-collecting buffer layer. The optimized thickness of the MoO3 layer is 8 nm, at which the device shows the best power conversion efficiency （PCE） among all devices, resulting from a balance of optical absorption and charge transport. After being treated by UV-ozone for 10 min, the transmittance of the MoO3 film is almost unchanged. Atomic force microscopy results show that the treated surface morphology is improved. A high PCE of 3.99% under AM 1.5 G illumination （100 mW/cm2） is obtained.展开更多
AlGaN/GaN high electron mobility transistors （HEMTs） grown on Fe-modulation-doped （MD） and unintentionally doped （UID） GaN buffer layers are investigated and compared. Highly resistive GaN buffers （10^9Ω·...AlGaN/GaN high electron mobility transistors （HEMTs） grown on Fe-modulation-doped （MD） and unintentionally doped （UID） GaN buffer layers are investigated and compared. Highly resistive GaN buffers （10^9Ω·cm） are induced by individual mechanisms for the electron traps＇ formation： the Fe MD buffer （sample A） and the UID buffer with high density of edge-type dislocations （7.24×10^9cm^-2, sample B）. The 300K Hall test indicates that the mobility of sample A with Fe doping （2503cm^2V^-1s^-1） is much higher than sample B （1926cm^2V^-1s^-1） due to the decreased scattering effect on the two-dimensional electron gas. HEMT devices are fabricated on the two samples and pulsed I–V measurements are conducted. Device A shows better gate pinch-off characteristics and a higher threshold voltage （-2.63V） compared with device B （-3.71V）. Lower gate leakage current ｜IGS｜ of device A （3.32×10^-7A） is present compared with that of device B （8.29×10^-7A）. When the off-state quiescent points Q_2 （V GQ2=-8V, V DQ2=0V） are on, V th hardly shifts for device A while device B shows ＋0.21V positive threshold voltage shift, resulting from the existence of electron traps associated with the dislocations in the UID-GaN buffer layer under the gate. Under pulsed I–V and transconductance G m–V GS measurement, the device with the Fe MD-doped buffer shows more potential in improving reliability upon off-state stress.展开更多
An inexpensive material, i.e., tetranuclear zinc（Ⅱ） complex, （Zn40（A/D）6） [AID = 7-azaindolate], was utilized as a cathode buffer in organic photovoltaic （OPV） devices, leading to the improvement of device pe...An inexpensive material, i.e., tetranuclear zinc（Ⅱ） complex, （Zn40（A/D）6） [AID = 7-azaindolate], was utilized as a cathode buffer in organic photovoltaic （OPV） devices, leading to the improvement of device performance. Compared to OPV devices based on a conventional cathode buffer of TPBi （1,3,5-tris（2-N-phenylbenzimidazolyl）benzene）, although the freshly prepared devices showed similar performance, when heated to a series of high temperatures under air, the short circuit current and the open circuit voltage of the Zn40（AID）6 devices dropped more slowly, indicating the superiority of using Zn40（AID）6 as a cathode buffer over TPBi in OPV devices.展开更多
基金Project supported by the National Basic Research Program of China (Grant No. 61176128)the Knowledge Innovation Project of the Chinese Academy of SciencesSuzhou Municipal Solar Cell Research Project,China (Grant No. SYG201145)
文摘Single-junction,lattice-mismatched In0.69Ga0.31As thermophotovoltaic（TPV） devices each with a bandgap of 0.6 eV are grown on InP substrate by metal-organic chemical vapour deposition（MOCVD）.Compositionally undulating stepgraded InAsyP1-y buffer layers with a lattice mismatch of ～1.2% are used to mitigate the effect of lattice mismatch between the device layers and the InP substrate.With an optimized buffer thickness,the In0.69Ga0.31As active layers grown on the buffer display a high crystal quality with no measurable tetragonal distortion.High-performance single-junction devices are demonstrated,with an open-circuit voltage of 0.215 V and a photovoltaic conversion efficiency of 6.9% at a short-circuit current density of 47.6 mA/cm2,which are measured under the standard solar simulator of air mass 1.5-global（AM 1.5 G）.
基金Project supported by the Program for New Century Excellent Talents in University of Ministry of Education of China(Grant No.NCET-10-0220)the Specialized Research Fund for the Doctoral Program of Higher Education of China(Grant No.20120009130005)the Fundamental Research Funds for the Central Universities of Ministry of Education of China(Grant No.2012JBZ001)
文摘The enhanced performance of a squaraine compound, with 2,4-bis[4-（N,N-diisobutylamino）-2,6-dihydroxyphenyl] squaraine as the donor and [6,6]-phenyl-C71-butyric acid methyl ester （PC71BM） as the acceptor, in solution-processed or- ganic photovoltaic devices is obtained by using UV-ozone-treated MoO3 as the hole-collecting buffer layer. The optimized thickness of the MoO3 layer is 8 nm, at which the device shows the best power conversion efficiency （PCE） among all devices, resulting from a balance of optical absorption and charge transport. After being treated by UV-ozone for 10 min, the transmittance of the MoO3 film is almost unchanged. Atomic force microscopy results show that the treated surface morphology is improved. A high PCE of 3.99% under AM 1.5 G illumination （100 mW/cm2） is obtained.
基金Supported by the National Natural Science Foundation of China under Grant Nos 61204017 and 61334002the National Basic Research Program of Chinathe National Science and Technology Major Project of China
文摘AlGaN/GaN high electron mobility transistors （HEMTs） grown on Fe-modulation-doped （MD） and unintentionally doped （UID） GaN buffer layers are investigated and compared. Highly resistive GaN buffers （10^9Ω·cm） are induced by individual mechanisms for the electron traps＇ formation： the Fe MD buffer （sample A） and the UID buffer with high density of edge-type dislocations （7.24×10^9cm^-2, sample B）. The 300K Hall test indicates that the mobility of sample A with Fe doping （2503cm^2V^-1s^-1） is much higher than sample B （1926cm^2V^-1s^-1） due to the decreased scattering effect on the two-dimensional electron gas. HEMT devices are fabricated on the two samples and pulsed I–V measurements are conducted. Device A shows better gate pinch-off characteristics and a higher threshold voltage （-2.63V） compared with device B （-3.71V）. Lower gate leakage current ｜IGS｜ of device A （3.32×10^-7A） is present compared with that of device B （8.29×10^-7A）. When the off-state quiescent points Q_2 （V GQ2=-8V, V DQ2=0V） are on, V th hardly shifts for device A while device B shows ＋0.21V positive threshold voltage shift, resulting from the existence of electron traps associated with the dislocations in the UID-GaN buffer layer under the gate. Under pulsed I–V and transconductance G m–V GS measurement, the device with the Fe MD-doped buffer shows more potential in improving reliability upon off-state stress.
基金supported by the National Natural Science Foundation of China(20974046,61077021,61076016)New Century Excellent Talents funding from Ministry of Education in China(NCET-08-0697)National Basic Research Program of China(973 Program,2009CB930600)
文摘An inexpensive material, i.e., tetranuclear zinc（Ⅱ） complex, （Zn40（A/D）6） [AID = 7-azaindolate], was utilized as a cathode buffer in organic photovoltaic （OPV） devices, leading to the improvement of device performance. Compared to OPV devices based on a conventional cathode buffer of TPBi （1,3,5-tris（2-N-phenylbenzimidazolyl）benzene）, although the freshly prepared devices showed similar performance, when heated to a series of high temperatures under air, the short circuit current and the open circuit voltage of the Zn40（AID）6 devices dropped more slowly, indicating the superiority of using Zn40（AID）6 as a cathode buffer over TPBi in OPV devices.
