Based on the effective structure of the self-mixing interference effects,a general model for the self-mixing interference effects in the LD pumped solid-state laser has been established for the first time.The numerica...Based on the effective structure of the self-mixing interference effects,a general model for the self-mixing interference effects in the LD pumped solid-state laser has been established for the first time.The numerical simulation of the self-mixing interference signal has been done,the results show that when the external cavity length is integral times of 1/2,1/3,2/3,1/4,3/4 of the effective cavity length,the intensity of the self-mixing interference signals reach maximum in value.While that of single mode laser is integral times of half of the effective cavity length,the measuring precision of displacement of single mode laser is λ/2.A conclusion can be drawn from the above results that the measuring precision of displacement of multi-mode laser is higher than that of single mode laser.展开更多
Laser self-mixing interference（SMI） wave plate measurement method is a burgeoning technique for its simplicity and efficiency. But for the non-coated sample, the reflected light from the surface can seriously affect...Laser self-mixing interference（SMI） wave plate measurement method is a burgeoning technique for its simplicity and efficiency. But for the non-coated sample, the reflected light from the surface can seriously affect the measurement results.To analyze the reason theoretically, a self-consistent model for laser operation with a sub-external and an external cavity is established, and the sub-external cavity formed by the sample and a cavity mirror is proved to be the main error source.A synchronous tuning method is proposed to eliminate the sub-external cavity effect. Experiments are carried out on the synchronously tuning double external cavities self-mixing interference system, and the error of the system is in the range of -0.435°~0.387° compared with the ellipsometer. The research plays an important role in improving the performance and enlarging the application range of the laser self-mixing interference system.展开更多
The impact of Y content on the microstructure,mechanical properties,and electromagnetic interference shielding effectiveness(EMI SE)of the Mg-6Zn-xY-1La-0.5Zr alloy was investigated.After the extrusion treatment of Mg...The impact of Y content on the microstructure,mechanical properties,and electromagnetic interference shielding effectiveness(EMI SE)of the Mg-6Zn-xY-1La-0.5Zr alloy was investigated.After the extrusion treatment of Mg-6Zn-xY-1La-0.5Zr alloy,the large grains that did not experience dynamic recrystallization were elongated along the extrusion direction,and the small-sized dynamic recrystallized grains were distributed around the large grains.The Mg-6Zn-1Y-1La-0.5Zr alloy demonstrated a favorable balance between strength and plasticity,exhibiting ultimate tensile strength,yield strength,and elongation values of 332.3 MPa,267.3 MPa,and 16.2%,respectively.Moreover,the EMI SE within the frequency range of 30-1500 MHz changes from 79 to 110 dB,aligning with the electromagnetic shielding requirements of many high-strength applications.展开更多
Fibre sensors exhibit a number of advantages over other sensors such as high sensitivity, electric insulation, corrosion resistance, interference rejection and so on. And laser self-mixing interference can accurately ...Fibre sensors exhibit a number of advantages over other sensors such as high sensitivity, electric insulation, corrosion resistance, interference rejection and so on. And laser self-mixing interference can accurately detect the phase difference of feedback light. In this paper, a novel laser self-mixing interference fibre sensor that combines the advantages of fibre sensors with those of laser self-mixing interference is presented. Experimental configurations are set up to study the relationship between laser power output and phase of laser feedback light when the fibre trembles or when the fibre is stretched or pressed. The theoretical analysis of pressure sensors based on laser self-mixing interference is indicated to accord with the experimental results.展开更多
Transparent liquid flattening or stretching realizes optical path length modulation. A flat thin seal transparent cavity, one flank is an electromagnetic driving membrane and is filled over with transparent liquid. Vi...Transparent liquid flattening or stretching realizes optical path length modulation. A flat thin seal transparent cavity, one flank is an electromagnetic driving membrane and is filled over with transparent liquid. Vibration of the membrane makes the liquid compressing or stretching, changes the liquid layer thickness, i.e. the optical path length of light through the liquid layer. The liquid layer compressed is equivalent to increase membrane tension. The membrane has higher resonant frequency. The cavity diameter 10 mm modulation frequency is about 18 kHz.展开更多
The combined and interactive effects of the bolt-hole fit conditions and the preloads of the fasteners on the load carrying capacity of single-lap composite-to-titanium bolted joints have been investigated both experi...The combined and interactive effects of the bolt-hole fit conditions and the preloads of the fasteners on the load carrying capacity of single-lap composite-to-titanium bolted joints have been investigated both experimentally and numerically. Quasi-static tests of the hybrid joints with different fit conditions are implemented, and a three dimensional finite element progressive failure analysis model is proposed to predict the influences of the bolt-hole fit conditions and fastener＇s pre- loads on the mechanical behaviors of the joints. Based on the experimental validated simulation method, a multi-factor, mixed levels orthogonal design table and the analysis of variance method are used to arrange the simulation conditions and to further study the interactive effects of preloads and fit conditions. Through the analysis of the results, for the researched double bolt, single-lap composite-titanium joints, it is found that： the effects of both the interference fit and the preloads change from positive into negative mode with the increase of the interference fit values or preload values; appropriate bolt-hole fit conditions and preloads can improve the bolt-hole contact conditions of the loaded joints, and then retard the fiber failures around the fastener holes, and increase the load carrying capacity of the joints eventually; the interactive effect of the bolt-hole interference fit conditions and preloads cannot be ignored and the parameters need to be considered together and synthetically as the joints are being optimized.展开更多
In this article, hybrid fillers with different dimensions, namely, 2-dimensional（2-D） expanded graphite（EG） and 1-dimensional（1-D） multi-walled carbon nanotubes（CNTs）, were added to aromatic nylon MXD6 matrix ...In this article, hybrid fillers with different dimensions, namely, 2-dimensional（2-D） expanded graphite（EG） and 1-dimensional（1-D） multi-walled carbon nanotubes（CNTs）, were added to aromatic nylon MXD6 matrix via melt-blending, to enhance its thermal and electrical conductivity as well as electromagnetic interference shielding effectiveness（EMI SE）. For ternary composites of MXD6/EG/CNTs, the electrical conductivity reaches up nine orders of magnitude higher compared to that of the neat MXD6 sample, which turned the polymer-based composites from an insulator to a conductor, and the thermal conductivity has been enhanced by 477% compared with that of neat MXD6 sample. Meanwhile, the EMI SE of ternary composite reaches ~50 d B at the overall filler loading of only 18 wt%. This work can provide guidance for the preparation of polymer composites with excellent thermal and electrical conductivity via using hybrid filler.展开更多
This paper reports the modeling method and outcomes of mechanical performance and damage evolution of single-lap bolted composite interference-fit joints under extreme temperatures.The anisotropic continuum damage mod...This paper reports the modeling method and outcomes of mechanical performance and damage evolution of single-lap bolted composite interference-fit joints under extreme temperatures.The anisotropic continuum damage model involving thermal effects is established on continuum damage mechanics which integrates the shear nonlinearity constitutive relations characterized by Romberg-Osgood equation.The temperature-induced modification of thermal strains and material properties is incorporated in stress-strain analysis,extended 3 D failure criteria and exponential damage evolution rules.The proposed model is calibrated and employed to simulate behavior of composite joints in interference fitting,bolt preloading,thermal and bearing loading processes,during which the influence of interference-fit sizes,preload levels,laminate layups and service temperatures is thoroughly investigated.The predicated interfacial behavior,bearing response and failure modes are in good agreement with experimental tests.The numerical model is even capable of reflecting some non-intuitive experimental findings such as residual stress relaxation and matrix softening at elevated temperatures.展开更多
Most previous investigations on interference effects of tall buildings under wind actions focused on the wind induced interference effects between two buildings,and the interference effects of three or more buildings ...Most previous investigations on interference effects of tall buildings under wind actions focused on the wind induced interference effects between two buildings,and the interference effects of three or more buildings have seldom been studied so far due to the huge workload involved in experiments and data processing.In this paper,mean and dynamic force/response interference effects and peak wind pressure interference effects of two and three tall buildings,especially the three-building configuration,are investigated through a series of wind tunnel tests on typical tall building models using high frequency force balance technique and wind pressure measurements.Furthermore,the present paper focuses on the effects of parameters,including breadth ratio and height ratio of the buildings and terrain category,on the interference factors and derives relevant regression results for the interference factors.展开更多
The Stokes polarimeter based on liquid crystal variable retarders(LCVRs)is envisaged as a promising novel technique for polarization measurement in space applications due to the inherent advantage of eliminating the n...The Stokes polarimeter based on liquid crystal variable retarders(LCVRs)is envisaged as a promising novel technique for polarization measurement in space applications due to the inherent advantage of eliminating the need for conventional rotating polarizing optics and increasing the measuring speed.However,the intrinsic multi-beam interference in LCVRs limits its polarization accuracy by several percent.How to eliminate the influence of the interference effect becomes an urgent issue for the liquid-crystal-based Stokes polarimeter.The present study introduces a simplified but effective interference model based on the thin-film optics and polarized light theory to simulate the relationship between the interference effect of the LCVRs-based Stokes polarimeter and the polarization accuracy.The simulation results show that the transmittance variation of LCVR with the derived voltage is caused by multi beam interference between the indium tin oxide(ITO)film and the liquid crystal within LCVR,which produces a few percent of instrumental polarization.The instrumental polarization is about 0.01 and different for different wavelengths.An optimization method was proposed to reduce the instrumental polarization to 0.002,effectively improving the polarization sensitivity of the Stokes polarimeter limited by the interference.In addition,an experimental setup was built up to measure and analyze the influence of the interference effect of the LCVRs-based Stokes polarimeter on the polarization accuracy before and after the optimization.The experiment results are in good agreement with the simulation.展开更多
Achieving excellent electromagnetic interference(EMI)shielding effectiveness(SE)in high rare earth(RE)-content Mg alloys is currently a significant technical challenge.This work systematically investigated the effects...Achieving excellent electromagnetic interference(EMI)shielding effectiveness(SE)in high rare earth(RE)-content Mg alloys is currently a significant technical challenge.This work systematically investigated the effects of different Nd elements on the electrical conductivity and EMI SE of Mg-12Gd-3Y-xNd alloy by adding Nd elements to the high RE content Mg-12Gd-3Y alloy,followed by a combined process of hot rolling and aging(R-A).The results indicate that the addition of Nd elements leads to reduced solid solubility of Gd and Y,resulting in a large amount of precipitation.The Mg-12Gd-3Y-2.0Nd alloy has the optimum EMI SE after 63%R-A treatment,reaching 88-118 dB at 30-1500 MHz.The Mg-12Gd-3Y-xNd alloy has acicular and granular forms of the Mg5(Gd,Y,Nd)(abbreviated as Mg5RE)phase after R-A treatment.The granular Mg5RE phase gradually breaks up and refines into more minor scales with increasing rolling reduction and is diffusely distributed in the matrix.The acicular Mg5RE phase is densely arranged,with cross-distribution in some areas.The cross-distributed acicular Mg5RE phase,the delicate granular Mg5RE phase,and the denseβ′phase provide more interfaces for reflecting electromagnetic waves and increase the multiple reflection loss of incident electromagnetic waves.In addition,the Mg-12Gd-3Y-xNd alloy deflects most of the c-axis of the grains parallel to the normal direction(ND)as the rolling reduction increases,making the impedance difference between the plate surface and air larger.The increased impedance makes the material reflect more loss to incident electromagnetic waves.The combined use of these two leads to an excellent EMI SE of Mg-12Gd-3Y-xNd with high RE content after R-A treatment.展开更多
The mean wind-induced interference effects between two high-rise buildings,in which the interfering buildings have different heights,were numerical simulated in the terrain roughness of B and D types by the Reynolds s...The mean wind-induced interference effects between two high-rise buildings,in which the interfering buildings have different heights,were numerical simulated in the terrain roughness of B and D types by the Reynolds stress equation model(RSM)of fluent.The results are in good agreement with those of the wind tunnel test.Influences of the relative arrangement of two buildings,the height of the interfering buildings and the terrain roughness upon the mean interference effects were analyzed,and the space distributions of IFCPs on the principal building under tandem arrangement were studied.The results indicate that the lower interfering buildings can always bring larger interference factors comparing to the higher ones under tandem arrangement except that the height is larger than 1.25h,and the heights' influence on the mean interference effects will increase as the reduced spacing of two buildings.The influence of heights will be little under stagger arrangement.展开更多
Multipath and continuous wave (CW) interference may cause severe performance degradation of global navigation satellite system (GNSS) receivers. This paper analyzes the code tracking performance of early-minus-late po...Multipath and continuous wave (CW) interference may cause severe performance degradation of global navigation satellite system (GNSS) receivers. This paper analyzes the code tracking performance of early-minus-late power (EMLP) discriminator of GNSS receivers in the presence of multipath and CW interference. An analytical expression of the code tracking error is suggested for EMLP discriminator, and it can be used to assess the effect of multipath and CW interference. The derived expression shows that the combined effects include three components: multipath component;CW interference component and the combined component of multipath and CW interference. The effect of these components depends on some factors which can be classified into two categories: the receiving environment and the receiver parameters. Numerical results show how these factors affect the tracking performances. It is shown that the proper receiver parameters can suppress the combined effects of multipath and CW interference.展开更多
ASeblsf-tmraicxti：n gA innteewrf esreelnf-cme ioxcincgu rms iicnr oa -liansteerrf derioodmee t（eLrD b）a sbeyd r eofnl eecxtitnergn tahl ep lhiagshet fmroomdu ala tmioinrr oisr-plirkees etanrtgedet. in front of the ...ASeblsf-tmraicxti：n gA innteewrf esreelnf-cme ioxcincgu rms iicnr oa -liansteerrf derioodmee t（eLrD b）a sbeyd r eofnl eecxtitnergn tahl ep lhiagshet fmroomdu ala tmioinrr oisr-plirkees etanrtgedet. in front of the laser. Sinusoidal phase modulation of the beam is obtained by an electro-optic crystal （EOC） in the external cavity. The phase of the interference signal is demodulated by Fourier analysis method. The combination of the modulation and demodulation decreases the sensitivity of the instru-ment to fluctuations of the laser power and the noise induced by environment. Experimentally, the new micro-interferometer is applied to measure the micro-displacement of a high precision commer-cial PZT with an accuracy of 〈10 nm.展开更多
To solve the problems with the existing methods for detecting hollowing defects,such as inconvenient operation,low efficiency and intense subjectivity,and to improve the efficiency of the acoustic-optic fusion method ...To solve the problems with the existing methods for detecting hollowing defects,such as inconvenient operation,low efficiency and intense subjectivity,and to improve the efficiency of the acoustic-optic fusion method for detecting hollowing defects,in this paper the vibration characteristics of hollowing defects are measured and analyzed using a laser self-mixing interferometer.The ceramic tile above the hollowing defect is equivalent to a thin circular plate with peripheral fixed support.According to Kirchhoff's classical circular plate theory and the circular plate displacement function based on the improved Fourier series,a theoretical model of a circular plate is established.By solving the characteristic equation,the theoretical modal parameters of hollowing defects are obtained.Subsequently,an experimental system based on a laser self-mixing interferometer is built,and modal experiments are carried out using the hammering method.The experimental modal parameters are obtained with a professional modal analysis software.Through comparative analysis between the theoretical and experimental modal parameters,the error of the natural frequency results is found to be tiny and the mode shapes are consistent.These results provide theoretical guidance for a practical non-destructive acoustic-optic fusion method for detecting hollowing defects.展开更多
A partition model of interference efficiency was constructed to study the coupling interference effect under combined internal and external flow.The concept of“internal flow efficiency”,“velocity ratio”and“interf...A partition model of interference efficiency was constructed to study the coupling interference effect under combined internal and external flow.The concept of“internal flow efficiency”,“velocity ratio”and“interference efficiency”were introduced to quantify the effect of internal flow and interference,and reveal the coupling mechanism among internal flow,external flow and interference effect.The results showed that the dynamic response of risers under variable angles was significantly different after considering the effect of internal flow.When the external flow velocity was smaller than 0.25 m/s,the vibration of risers was promoted by the internal flow.With the increase of external flow velocity,the effect of internal flow was weakened and the dynamic response of riser mainly depended on the external flow and interference effect.Under the effect of different internal flow,the interference efficiency had similar change trend.The interference effect amplified the complex secondary flow effect inside the riser,making the dynamic response of riser complex and random.In this paper,the overlap area and subdivision criterion of interference effect were constructed within the range of experimental velocity ratio,and the change curve of interference efficiency was obtained with an average meaning,which may have important practical meaning.展开更多
Quantum cognition is a scientific approach to cognitive phenomena which makes use of the mathematical formalism of quantum theory. Quantum interference effect constitutes one of this theory’s main tenets and has been...Quantum cognition is a scientific approach to cognitive phenomena which makes use of the mathematical formalism of quantum theory. Quantum interference effect constitutes one of this theory’s main tenets and has been repeatedly demonstrated experimentally, in the last decade, in adult subjects. In the present paper, we aim to demonstrate, for the first time, the existence of thequantum interference effect on children during an experiment involving an integration of cognition and emotion. Our positive results consolidate the presuppositions of quantum cognition, enlarging its field of application to children’s mental apparatus and evidence the important question to consider the quantum model in the current investigated question of the interaction of cognition and emotion in children at neurological and psychological levels.展开更多
Through discussion of the time-distance curve characteristics of the direct waveand from the front,side and rear of the reflection waves of the seismic reflection methodfor advanced exploration in mines,and analysis o...Through discussion of the time-distance curve characteristics of the direct waveand from the front,side and rear of the reflection waves of the seismic reflection methodfor advanced exploration in mines,and analysis of several major interference waves inmines,the differences in time-distance curve,frequency,apparent velocity between theeffective wave and interference wave in the seismic reflection method for advanced explorationare obtained.According to the differences,the effective wave is extracted andthe interference wave is filtered and the system's precision and accuracy is improved.展开更多
Disturbance effect is one of the important factors for wind damage to large cooling towers.Existing studies on the wind-induced interference of cooling tower groups are aimed at the same size and the lack of wind-indu...Disturbance effect is one of the important factors for wind damage to large cooling towers.Existing studies on the wind-induced interference of cooling tower groups are aimed at the same size and the lack of wind-induced interference effects between cooling towers of different sizes.With the background of the additional cooling tower project at Shandong Luxi Power Plant in China,the rigid body pressure wind tunnel test is carried out to obtain 194 conditions for the three combinations of the existing four-tower combination(small size),the new two-tower combination(large size)and the six-tower combination surface wind pressure distribution.Numerical simulation of the surrounding flow field of the cooling tower group with the most unfavorable interference condition of the six-tower combination is conducted using the computational fluid dynamics(CFD)method.Based on this,the characteristics of the average and pulsating wind pressure distribution of the cooling tower surface under the six-tower combination are mainly studied,and the load interference coefficients of the large-sized cooling tower and the small-sized cooling tower under the three tower group combinations are compared.The velocity flow field and vorticity changes around the cooling tower group at unfavorable wind angles are analyzed,and the wind-induced interference mechanism between cooling tower groups of different sizes is mainly refined.Research shows that the interference effect between such cooling tower groups of different sizes is much larger than that of cooling tower groups of the same size,which is specifically manifested as the enhancement effect of small-sized cooling towers and the shielding effect of large-sized cooling towers.The interference coefficient of large-sized cooling tower groups increases by 28%,and the interference coefficient of small-sized cooling tower groups decreases by 6.4%.The airflow acceleration caused by the pinch effect between small-sized cooling tower groups has an adverse effect on large-sized cooling towers and can significantly increase the magnitude of local wind load.The shielding effect of large-sized cooling towers can reduce the overall wind load of small-sized cooling towers.The research conclusions can provide the basis of wind load value design for wind resistance design of such large cooling tower addition projects.展开更多
We investigate experimentally multi-orbital effects in high-order harmonic generation(HHG) from aligned CO2 and N2O molecules by intense femtosecond laser fields with linear and elliptical polarizations.For either of ...We investigate experimentally multi-orbital effects in high-order harmonic generation(HHG) from aligned CO2 and N2O molecules by intense femtosecond laser fields with linear and elliptical polarizations.For either of the aligned molecules, a minimum in the harmonic spectrum is observed, the position of which shifts to lower-order harmonics when decreasing the intensity or increasing the ellipticity of the driving laser.This indicates that the minimum originates from the dynamic interference of different channels, of which the tunneling ionization and recombination are contributed via different molecular orbitals.The results show that both the highest occupied molecular orbital(HOMO) and low-lying HOMO-2 in CO2(or HOMO-1 in N2O) contribute to the molecular HHG in both linearly and elliptically polarized strong laser fields.Our study would pave a way for understanding multi-electron dynamics from polyatomic molecules irradiated by strong laser fields.展开更多
文摘Based on the effective structure of the self-mixing interference effects,a general model for the self-mixing interference effects in the LD pumped solid-state laser has been established for the first time.The numerical simulation of the self-mixing interference signal has been done,the results show that when the external cavity length is integral times of 1/2,1/3,2/3,1/4,3/4 of the effective cavity length,the intensity of the self-mixing interference signals reach maximum in value.While that of single mode laser is integral times of half of the effective cavity length,the measuring precision of displacement of single mode laser is λ/2.A conclusion can be drawn from the above results that the measuring precision of displacement of multi-mode laser is higher than that of single mode laser.
文摘Laser self-mixing interference（SMI） wave plate measurement method is a burgeoning technique for its simplicity and efficiency. But for the non-coated sample, the reflected light from the surface can seriously affect the measurement results.To analyze the reason theoretically, a self-consistent model for laser operation with a sub-external and an external cavity is established, and the sub-external cavity formed by the sample and a cavity mirror is proved to be the main error source.A synchronous tuning method is proposed to eliminate the sub-external cavity effect. Experiments are carried out on the synchronously tuning double external cavities self-mixing interference system, and the error of the system is in the range of -0.435°~0.387° compared with the ellipsometer. The research plays an important role in improving the performance and enlarging the application range of the laser self-mixing interference system.
基金supported from the National Key R&D Program of China(No.2021YFB3701100)the National Natural Science Foundation of China(No.52225101)+1 种基金the Fundamental Research Funds for the Central Universities of China(Nos.2023CDJYXTD-002,2020CDJDPT001)the Graduate Research and Innovation Foundation of Chongqing,China(No.CYB23037).
文摘The impact of Y content on the microstructure,mechanical properties,and electromagnetic interference shielding effectiveness(EMI SE)of the Mg-6Zn-xY-1La-0.5Zr alloy was investigated.After the extrusion treatment of Mg-6Zn-xY-1La-0.5Zr alloy,the large grains that did not experience dynamic recrystallization were elongated along the extrusion direction,and the small-sized dynamic recrystallized grains were distributed around the large grains.The Mg-6Zn-1Y-1La-0.5Zr alloy demonstrated a favorable balance between strength and plasticity,exhibiting ultimate tensile strength,yield strength,and elongation values of 332.3 MPa,267.3 MPa,and 16.2%,respectively.Moreover,the EMI SE within the frequency range of 30-1500 MHz changes from 79 to 110 dB,aligning with the electromagnetic shielding requirements of many high-strength applications.
基金Project supported by the foundations of State Key Lab of Precision Measurement Technology & Instruments, Tsinghua University,China
文摘Fibre sensors exhibit a number of advantages over other sensors such as high sensitivity, electric insulation, corrosion resistance, interference rejection and so on. And laser self-mixing interference can accurately detect the phase difference of feedback light. In this paper, a novel laser self-mixing interference fibre sensor that combines the advantages of fibre sensors with those of laser self-mixing interference is presented. Experimental configurations are set up to study the relationship between laser power output and phase of laser feedback light when the fibre trembles or when the fibre is stretched or pressed. The theoretical analysis of pressure sensors based on laser self-mixing interference is indicated to accord with the experimental results.
文摘Transparent liquid flattening or stretching realizes optical path length modulation. A flat thin seal transparent cavity, one flank is an electromagnetic driving membrane and is filled over with transparent liquid. Vibration of the membrane makes the liquid compressing or stretching, changes the liquid layer thickness, i.e. the optical path length of light through the liquid layer. The liquid layer compressed is equivalent to increase membrane tension. The membrane has higher resonant frequency. The cavity diameter 10 mm modulation frequency is about 18 kHz.
文摘The combined and interactive effects of the bolt-hole fit conditions and the preloads of the fasteners on the load carrying capacity of single-lap composite-to-titanium bolted joints have been investigated both experimentally and numerically. Quasi-static tests of the hybrid joints with different fit conditions are implemented, and a three dimensional finite element progressive failure analysis model is proposed to predict the influences of the bolt-hole fit conditions and fastener＇s pre- loads on the mechanical behaviors of the joints. Based on the experimental validated simulation method, a multi-factor, mixed levels orthogonal design table and the analysis of variance method are used to arrange the simulation conditions and to further study the interactive effects of preloads and fit conditions. Through the analysis of the results, for the researched double bolt, single-lap composite-titanium joints, it is found that： the effects of both the interference fit and the preloads change from positive into negative mode with the increase of the interference fit values or preload values; appropriate bolt-hole fit conditions and preloads can improve the bolt-hole contact conditions of the loaded joints, and then retard the fiber failures around the fastener holes, and increase the load carrying capacity of the joints eventually; the interactive effect of the bolt-hole interference fit conditions and preloads cannot be ignored and the parameters need to be considered together and synthetically as the joints are being optimized.
基金financially supported by the National Natural Science Foundation of China(Nos.21274095 and 51573102)
文摘In this article, hybrid fillers with different dimensions, namely, 2-dimensional（2-D） expanded graphite（EG） and 1-dimensional（1-D） multi-walled carbon nanotubes（CNTs）, were added to aromatic nylon MXD6 matrix via melt-blending, to enhance its thermal and electrical conductivity as well as electromagnetic interference shielding effectiveness（EMI SE）. For ternary composites of MXD6/EG/CNTs, the electrical conductivity reaches up nine orders of magnitude higher compared to that of the neat MXD6 sample, which turned the polymer-based composites from an insulator to a conductor, and the thermal conductivity has been enhanced by 477% compared with that of neat MXD6 sample. Meanwhile, the EMI SE of ternary composite reaches ~50 d B at the overall filler loading of only 18 wt%. This work can provide guidance for the preparation of polymer composites with excellent thermal and electrical conductivity via using hybrid filler.
基金finically supported by Joint Found for Equipment Advance Research and Aerospace Science and Technology of China(No.6141B061401)Fund for Distinguished Young Scholars in Shaanxi Province of China(No.2018-JC-009)。
文摘This paper reports the modeling method and outcomes of mechanical performance and damage evolution of single-lap bolted composite interference-fit joints under extreme temperatures.The anisotropic continuum damage model involving thermal effects is established on continuum damage mechanics which integrates the shear nonlinearity constitutive relations characterized by Romberg-Osgood equation.The temperature-induced modification of thermal strains and material properties is incorporated in stress-strain analysis,extended 3 D failure criteria and exponential damage evolution rules.The proposed model is calibrated and employed to simulate behavior of composite joints in interference fitting,bolt preloading,thermal and bearing loading processes,during which the influence of interference-fit sizes,preload levels,laminate layups and service temperatures is thoroughly investigated.The predicated interfacial behavior,bearing response and failure modes are in good agreement with experimental tests.The numerical model is even capable of reflecting some non-intuitive experimental findings such as residual stress relaxation and matrix softening at elevated temperatures.
基金supported by the National Natural Science Foundation of China (90715040)
文摘Most previous investigations on interference effects of tall buildings under wind actions focused on the wind induced interference effects between two buildings,and the interference effects of three or more buildings have seldom been studied so far due to the huge workload involved in experiments and data processing.In this paper,mean and dynamic force/response interference effects and peak wind pressure interference effects of two and three tall buildings,especially the three-building configuration,are investigated through a series of wind tunnel tests on typical tall building models using high frequency force balance technique and wind pressure measurements.Furthermore,the present paper focuses on the effects of parameters,including breadth ratio and height ratio of the buildings and terrain category,on the interference factors and derives relevant regression results for the interference factors.
基金Project supported by the Strategic Pioneer Program on Space Science,Chinese Academy of Sciences(Grant Nos.XDA15010800 and XDA15320102)the National Natural Science Foundation of China(Grant Nos.11427901,11773040,11403047,and 11427803)。
文摘The Stokes polarimeter based on liquid crystal variable retarders(LCVRs)is envisaged as a promising novel technique for polarization measurement in space applications due to the inherent advantage of eliminating the need for conventional rotating polarizing optics and increasing the measuring speed.However,the intrinsic multi-beam interference in LCVRs limits its polarization accuracy by several percent.How to eliminate the influence of the interference effect becomes an urgent issue for the liquid-crystal-based Stokes polarimeter.The present study introduces a simplified but effective interference model based on the thin-film optics and polarized light theory to simulate the relationship between the interference effect of the LCVRs-based Stokes polarimeter and the polarization accuracy.The simulation results show that the transmittance variation of LCVR with the derived voltage is caused by multi beam interference between the indium tin oxide(ITO)film and the liquid crystal within LCVR,which produces a few percent of instrumental polarization.The instrumental polarization is about 0.01 and different for different wavelengths.An optimization method was proposed to reduce the instrumental polarization to 0.002,effectively improving the polarization sensitivity of the Stokes polarimeter limited by the interference.In addition,an experimental setup was built up to measure and analyze the influence of the interference effect of the LCVRs-based Stokes polarimeter on the polarization accuracy before and after the optimization.The experiment results are in good agreement with the simulation.
基金financially supported by the National Key R&D Program of China(2021YFB3701100)the National Natural Science Foundation of China(52225101 and 52171103)the Fundamental Research Funds for the Central Universities(2020CDJDPT001).
文摘Achieving excellent electromagnetic interference(EMI)shielding effectiveness(SE)in high rare earth(RE)-content Mg alloys is currently a significant technical challenge.This work systematically investigated the effects of different Nd elements on the electrical conductivity and EMI SE of Mg-12Gd-3Y-xNd alloy by adding Nd elements to the high RE content Mg-12Gd-3Y alloy,followed by a combined process of hot rolling and aging(R-A).The results indicate that the addition of Nd elements leads to reduced solid solubility of Gd and Y,resulting in a large amount of precipitation.The Mg-12Gd-3Y-2.0Nd alloy has the optimum EMI SE after 63%R-A treatment,reaching 88-118 dB at 30-1500 MHz.The Mg-12Gd-3Y-xNd alloy has acicular and granular forms of the Mg5(Gd,Y,Nd)(abbreviated as Mg5RE)phase after R-A treatment.The granular Mg5RE phase gradually breaks up and refines into more minor scales with increasing rolling reduction and is diffusely distributed in the matrix.The acicular Mg5RE phase is densely arranged,with cross-distribution in some areas.The cross-distributed acicular Mg5RE phase,the delicate granular Mg5RE phase,and the denseβ′phase provide more interfaces for reflecting electromagnetic waves and increase the multiple reflection loss of incident electromagnetic waves.In addition,the Mg-12Gd-3Y-xNd alloy deflects most of the c-axis of the grains parallel to the normal direction(ND)as the rolling reduction increases,making the impedance difference between the plate surface and air larger.The increased impedance makes the material reflect more loss to incident electromagnetic waves.The combined use of these two leads to an excellent EMI SE of Mg-12Gd-3Y-xNd with high RE content after R-A treatment.
基金the National Natural Science Foundation of China(Grant No.59895410)
文摘The mean wind-induced interference effects between two high-rise buildings,in which the interfering buildings have different heights,were numerical simulated in the terrain roughness of B and D types by the Reynolds stress equation model(RSM)of fluent.The results are in good agreement with those of the wind tunnel test.Influences of the relative arrangement of two buildings,the height of the interfering buildings and the terrain roughness upon the mean interference effects were analyzed,and the space distributions of IFCPs on the principal building under tandem arrangement were studied.The results indicate that the lower interfering buildings can always bring larger interference factors comparing to the higher ones under tandem arrangement except that the height is larger than 1.25h,and the heights' influence on the mean interference effects will increase as the reduced spacing of two buildings.The influence of heights will be little under stagger arrangement.
文摘Multipath and continuous wave (CW) interference may cause severe performance degradation of global navigation satellite system (GNSS) receivers. This paper analyzes the code tracking performance of early-minus-late power (EMLP) discriminator of GNSS receivers in the presence of multipath and CW interference. An analytical expression of the code tracking error is suggested for EMLP discriminator, and it can be used to assess the effect of multipath and CW interference. The derived expression shows that the combined effects include three components: multipath component;CW interference component and the combined component of multipath and CW interference. The effect of these components depends on some factors which can be classified into two categories: the receiving environment and the receiver parameters. Numerical results show how these factors affect the tracking performances. It is shown that the proper receiver parameters can suppress the combined effects of multipath and CW interference.
基金Selected from Proceedings of the 7th International Conference on Frontiers of Design and Manufacturing (ICFDM’2006)This project is supported by Na-tional Natural Science Foundation of China (No. 50375074)Specialized Research Fund for the Doctoral Program of Higher Education (No. 20050319007).
文摘ASeblsf-tmraicxti：n gA innteewrf esreelnf-cme ioxcincgu rms iicnr oa -liansteerrf derioodmee t（eLrD b）a sbeyd r eofnl eecxtitnergn tahl ep lhiagshet fmroomdu ala tmioinrr oisr-plirkees etanrtgedet. in front of the laser. Sinusoidal phase modulation of the beam is obtained by an electro-optic crystal （EOC） in the external cavity. The phase of the interference signal is demodulated by Fourier analysis method. The combination of the modulation and demodulation decreases the sensitivity of the instru-ment to fluctuations of the laser power and the noise induced by environment. Experimentally, the new micro-interferometer is applied to measure the micro-displacement of a high precision commer-cial PZT with an accuracy of 〈10 nm.
基金Project supported by the National Key Research and Development Program of China(Grant No.2023YFF0722900)the Beijing Engineering Research Center of Aerial Intelligent Remote Sensing Equipments Fund(Grant No.AIRSE20233)the National Natural Science Foundation of China(Grant No.62175144)。
文摘To solve the problems with the existing methods for detecting hollowing defects,such as inconvenient operation,low efficiency and intense subjectivity,and to improve the efficiency of the acoustic-optic fusion method for detecting hollowing defects,in this paper the vibration characteristics of hollowing defects are measured and analyzed using a laser self-mixing interferometer.The ceramic tile above the hollowing defect is equivalent to a thin circular plate with peripheral fixed support.According to Kirchhoff's classical circular plate theory and the circular plate displacement function based on the improved Fourier series,a theoretical model of a circular plate is established.By solving the characteristic equation,the theoretical modal parameters of hollowing defects are obtained.Subsequently,an experimental system based on a laser self-mixing interferometer is built,and modal experiments are carried out using the hammering method.The experimental modal parameters are obtained with a professional modal analysis software.Through comparative analysis between the theoretical and experimental modal parameters,the error of the natural frequency results is found to be tiny and the mode shapes are consistent.These results provide theoretical guidance for a practical non-destructive acoustic-optic fusion method for detecting hollowing defects.
基金supported by the National Natural Science Foundation of China(Grant Nos.51709161 and U2006226)the Key Technology Research and Development Program of Shandong Province(Grant No.2019GHY112061)+1 种基金the Natural Science Foundation of Shandong Province(Grant No.ZR2022QE118)the Youth Talent Introduction and Cultivation Program of College in Shandong Province。
文摘A partition model of interference efficiency was constructed to study the coupling interference effect under combined internal and external flow.The concept of“internal flow efficiency”,“velocity ratio”and“interference efficiency”were introduced to quantify the effect of internal flow and interference,and reveal the coupling mechanism among internal flow,external flow and interference effect.The results showed that the dynamic response of risers under variable angles was significantly different after considering the effect of internal flow.When the external flow velocity was smaller than 0.25 m/s,the vibration of risers was promoted by the internal flow.With the increase of external flow velocity,the effect of internal flow was weakened and the dynamic response of riser mainly depended on the external flow and interference effect.Under the effect of different internal flow,the interference efficiency had similar change trend.The interference effect amplified the complex secondary flow effect inside the riser,making the dynamic response of riser complex and random.In this paper,the overlap area and subdivision criterion of interference effect were constructed within the range of experimental velocity ratio,and the change curve of interference efficiency was obtained with an average meaning,which may have important practical meaning.
文摘Quantum cognition is a scientific approach to cognitive phenomena which makes use of the mathematical formalism of quantum theory. Quantum interference effect constitutes one of this theory’s main tenets and has been repeatedly demonstrated experimentally, in the last decade, in adult subjects. In the present paper, we aim to demonstrate, for the first time, the existence of thequantum interference effect on children during an experiment involving an integration of cognition and emotion. Our positive results consolidate the presuppositions of quantum cognition, enlarging its field of application to children’s mental apparatus and evidence the important question to consider the quantum model in the current investigated question of the interaction of cognition and emotion in children at neurological and psychological levels.
基金Supported by the National Natural Science Foundation of China(50375026)the National Basic Research Program of China(2005cb221500)+1 种基金the National Key Technology R&D Program(2006BAK03B01)the National Natural Science Foundation Key Program(50534080)
文摘Through discussion of the time-distance curve characteristics of the direct waveand from the front,side and rear of the reflection waves of the seismic reflection methodfor advanced exploration in mines,and analysis of several major interference waves inmines,the differences in time-distance curve,frequency,apparent velocity between theeffective wave and interference wave in the seismic reflection method for advanced explorationare obtained.According to the differences,the effective wave is extracted andthe interference wave is filtered and the system's precision and accuracy is improved.
基金supported in part by the National Natural Science Foundations(Nos. 51878351, U1733129,51761165022)the Outstanding Youth Fund of Jiangsu Natural Science Foundation(No. BK20160083).
文摘Disturbance effect is one of the important factors for wind damage to large cooling towers.Existing studies on the wind-induced interference of cooling tower groups are aimed at the same size and the lack of wind-induced interference effects between cooling towers of different sizes.With the background of the additional cooling tower project at Shandong Luxi Power Plant in China,the rigid body pressure wind tunnel test is carried out to obtain 194 conditions for the three combinations of the existing four-tower combination(small size),the new two-tower combination(large size)and the six-tower combination surface wind pressure distribution.Numerical simulation of the surrounding flow field of the cooling tower group with the most unfavorable interference condition of the six-tower combination is conducted using the computational fluid dynamics(CFD)method.Based on this,the characteristics of the average and pulsating wind pressure distribution of the cooling tower surface under the six-tower combination are mainly studied,and the load interference coefficients of the large-sized cooling tower and the small-sized cooling tower under the three tower group combinations are compared.The velocity flow field and vorticity changes around the cooling tower group at unfavorable wind angles are analyzed,and the wind-induced interference mechanism between cooling tower groups of different sizes is mainly refined.Research shows that the interference effect between such cooling tower groups of different sizes is much larger than that of cooling tower groups of the same size,which is specifically manifested as the enhancement effect of small-sized cooling towers and the shielding effect of large-sized cooling towers.The interference coefficient of large-sized cooling tower groups increases by 28%,and the interference coefficient of small-sized cooling tower groups decreases by 6.4%.The airflow acceleration caused by the pinch effect between small-sized cooling tower groups has an adverse effect on large-sized cooling towers and can significantly increase the magnitude of local wind load.The shielding effect of large-sized cooling towers can reduce the overall wind load of small-sized cooling towers.The research conclusions can provide the basis of wind load value design for wind resistance design of such large cooling tower addition projects.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.91750104,11534004,11874179,11127403,11474130)the Natural Science Foundation of Jilin Province,China(Grant No.20180101289JC)
文摘We investigate experimentally multi-orbital effects in high-order harmonic generation(HHG) from aligned CO2 and N2O molecules by intense femtosecond laser fields with linear and elliptical polarizations.For either of the aligned molecules, a minimum in the harmonic spectrum is observed, the position of which shifts to lower-order harmonics when decreasing the intensity or increasing the ellipticity of the driving laser.This indicates that the minimum originates from the dynamic interference of different channels, of which the tunneling ionization and recombination are contributed via different molecular orbitals.The results show that both the highest occupied molecular orbital(HOMO) and low-lying HOMO-2 in CO2(or HOMO-1 in N2O) contribute to the molecular HHG in both linearly and elliptically polarized strong laser fields.Our study would pave a way for understanding multi-electron dynamics from polyatomic molecules irradiated by strong laser fields.
