A gradient structure was introduced into a metal laminated target plate,and the anti-penetration simulation of the gradient structure was compared with that of a uniform-layer-thickness target plate by finite element ...A gradient structure was introduced into a metal laminated target plate,and the anti-penetration simulation of the gradient structure was compared with that of a uniform-layer-thickness target plate by finite element simulation.The analysis was verified by an impact experiment.Results show that the high-level thickness and appropriate percentage of Ti alloy at the upper side of the gradient structure provide greater impact resistance against the bullet,which increases the warhead breakage and enhances the anti-penetration performance.In addition,during the impact process,the stress is transmitted and reflected in the form of waves in each layer of the target plate,and the interaction between the compression and tension waves causes non-synergistic deformation of the target plate and leads to delamination.The gradient target plate takes penetration resistance a step further through the higher energy absorption rate and more consumption of the bullet kinetic energy.This research provides a theoretical basis for the application of gradient structures in metallic laminated armor.展开更多
Recycling spent lithium-ion(Li+)batteries is critical for achieving environmental conservation and the strategic recovery of essential resources.Compared with conventional methods for recovering cathode materials,whic...Recycling spent lithium-ion(Li+)batteries is critical for achieving environmental conservation and the strategic recovery of essential resources.Compared with conventional methods for recovering cathode materials,which are energy-intensive and prone to secondary pollution,the direct regeneration approach has emerged as a rapid and highly efficient method,gaining widespread attention in recent years.However,this approach faces major challenges,including degraded electrochemical performances and limited economic value.This study,therefore,proposes a high-value direct regeneration strategy to convert degraded spent LiFePO_(4)(S-LFP)into a gradient manganese(Mn)-doped regenerated LiFe_(0.7)Mn_(0.3)PO_(4)/C(R-LFMP)composite.This method leverages the inherent microcracks and Li vacancies present in S-LFP,likely acting as diffusion channels for the Mn^(2+)/Li^(+)ions.Through a two-step mechanochemical ball-milling and carbothermal reduction process,this approach achieves simultaneous Li replenishment and surface-localised Mn gradient doping with enhanced structural control.Notably,the R-LFMP exhibits an exceptional electrochemical performance.At 0.1 C,it delivers a discharge capacity of 161.4 mA h g^(−1)and an energy density of 563.5 Wh kg^(−1)(representing a 60.5%improvement over S-LFP).Additionally,it maintains 83%capacity retention after 900 cycles at 0.5C,a considerable enhancement compared to commercial LFMP(62%).Furthermore,the regenerated cathode material generates a net profit of$7.102 kg^(−1),surpassing the profitability of conventional recycling methods by 90%.Overall,this study introduces a transformative and sustainable LFP regeneration technology,achieving breakthroughs in electrochemical restoration and high-value recycling,while paving the way for the closed-loop utilisation of LFP-based energy storage systems.展开更多
Optical phase-gradient metasurfaces have garnered significant attention for enabling flexible light manipulation,with applications across diverse domains.In this work,we will demonstrate that the metasurfaces with pha...Optical phase-gradient metasurfaces have garnered significant attention for enabling flexible light manipulation,with applications across diverse domains.In this work,we will demonstrate that the metasurfaces with phase gradient modulation can be used to achieve illusion optics,featuring the advantages of simple geometric structure and feasible implementation compared with the well-known transformation optics method.The underlying mechanism is the anomalous diffraction law caused by the phase gradient,which provides a theoretical basis for freely manipulating the propagation path of light.By considering a specific example,we will demonstrate that the phase gradient can transform spatial coordinates in real space into illusion space,thereby converting a plane in real space into a curved surface structure in illusion space to achieve the illusion effect.This approach provides a viable alternative to transformation optics for designing illusion devices.展开更多
Electrocatalytic CO_(2) reduction(CO_(2) RR)toward multi-carbon compounds is a challenging but meaningful route for carbon cycling.Copper-based catalysts are the most promising candidate for C_(2+)generation due to th...Electrocatalytic CO_(2) reduction(CO_(2) RR)toward multi-carbon compounds is a challenging but meaningful route for carbon cycling.Copper-based catalysts are the most promising candidate for C_(2+)generation due to their unique C–C coupling activity,yet the in situ reduction from Cu^(+) to Cu^(0) under cathodic potentials causes the catalyst deactivation.Herein,we develop a transient thermal shock strategy to embed Cu^(+) species into CeO_(2) lattices,constructing a CuO_(x)/CuCeO_(x)catalyst with a radial gradient Cu^(+) -Ov-Ce^(3+)/Ce^(4+)structure.Depth-profiling X-ray photoelectron spectroscopy(XPS)and density functional theory(DFT)calculations reveal that mismatched metal/oxygen diffusion kinetics drive continuous electron transfer from surface Cu^(+) to bulk Ce^(3+)/Ce^(4+)via oxygen vacancies(Ov),forming a dynamic“self-sacrificial”structure to preserve surface Cu^(+) states.In CO_(2)-saturated 0.1 M KHCO_(3),the optimized CuO_(x)/CuCeO_(x)-10 achieves a high C_(2) Faradaic efficiency(FE)of 85.8%at-1.4 V vs.RHE.In situ attenuated total reflection surface-enhanced infrared adsorption spectroscopy(ATR-SEIRAS)identifies the key intermediates of C_(2) are*OCCO and*OCCOH,while DFT reveals a drastic reduction of C–C coupling barrier from 0.842 to0.274 eV.This work demonstrates kinetically tailored metal-support interactions,enabling oxidationstate control for pathway-selective catalysis.展开更多
The paleo-geothermal gradient is a crucial parameter for converting the thermal history to the exhumation history.However,the precise estimation of this parameter has been a challenge.This paper presents a simple two-...The paleo-geothermal gradient is a crucial parameter for converting the thermal history to the exhumation history.However,the precise estimation of this parameter has been a challenge.This paper presents a simple two-step method to model the paleo-geothermal gradient using low-temperature thermochronology.(1)It uses the Monte Carlo approach to generate thermal histories in a vertical section randomly and calculates the entire thermal history within the goodnessof-fit thresholds based on different paleo-geothermal gradients.(2)It selects the optimum paleogeothermal gradient by comparing the entire thermal history within different goodness-of-fit thresholds.We validated the method with apatite(U-Th)/He and fission track data collected from two drill cores in the Haiyuan-Liupanshan region.The result revealed that the best-fit paleo-geothermal gradient was~42℃/km during the Early Cretaceous–Miocene and has decreased rapidly to 20℃/km since~10 Ma.The crust thickening in the study area may explain the rapid reduction in the paleogeothermal gradient since~10 Ma.Our results are consistent with earlier studies in the region,suggesting that our simple and more intuitive approach provides an alternative method for paleogeothermal gradient modeling.展开更多
Transformer models face significant computational challenges in private inference(PI).Existing optimization methods often rely on isolated techniques,neglecting joint structural and operational improvements.We propose...Transformer models face significant computational challenges in private inference(PI).Existing optimization methods often rely on isolated techniques,neglecting joint structural and operational improvements.We propose IG-3D,a unified framework that integrates structured compression and operator approximation through accurate importance assessment.Our approach first evaluates attention head importance using Integrated Gradients(IG),offering greater stability and theoretical soundness than gradient-based methods.We then apply a threedimensional optimization:(1)structurally pruning redundant attention heads;(2)replacing Softmax with adaptive polynomial approximation to avoid exponential computations;(3)implementing layer-wise GELU substitution to accommodate different layer characteristics.A joint thresholdmechanism coordinates compression across dimensions under accuracy constraints.Experimental results on the GLUE benchmark show that our method achieves an average 2.9×speedup in inference latency and a 50%reduction in communication cost,while controlling the accuracy loss within 2.3%,demonstrating significant synergistic effects and a superior accuracy-efficiency trade-off compared to single-technique optimization strategies.展开更多
Dear Editor,Mountain systems have long been refuges for many species,often viewed as"islands"that promote speciation due to geographic isolation(Rahbek et al.,2019).Their high environmental heterogeneity fos...Dear Editor,Mountain systems have long been refuges for many species,often viewed as"islands"that promote speciation due to geographic isolation(Rahbek et al.,2019).Their high environmental heterogeneity fosters centers of endemism,and they harbor over 85%of global species diversity(Zhao et al.,2022).Consequently,mountains are key systems for exploring biodiversity patterns along elevational gradients,where species richness often follows four recognized models:monotonic decrease,unimodal pattern(forward and backward peak patterns),and low plateau followed by a decrease along the elevational gradient(McCain et al.,2010).展开更多
Suffusion refers to the loss of fineparticles within the soil matrix without any associated volume change,induced by hydrodynamic forces.This study investigated the suffusion of sand-clay mixtures through one-dimensio...Suffusion refers to the loss of fineparticles within the soil matrix without any associated volume change,induced by hydrodynamic forces.This study investigated the suffusion of sand-clay mixtures through one-dimensional soil column experiments under a stepwise increase in hydraulic gradient(i),aiming to evaluate the critical hydraulic gradient(icrit)as a function of the size ratio between sand and clay,clay type,and ionic concentration.It was found that icrit was less than 0.1 for all sand-clay mixtures examined in this study.In addition,the lower peak concentrations of filtrated clay observed in sand-illite mixtures,compared to those of sand-kaolinite mixtures at the same level of i,suggest that illite particles are more susceptible to suffusion.Overall,the observed breakthrough curves,mass fraction of filtrated clay,volume of outflow,and total injection time presented in this study highlight the importance of considering clay type,sand-to-clay size ratio,and ionic concentration when assessing the suffusion behavior of clay-containing soils under a stepwise increase in hydraulic gradient.展开更多
In this study,an architecture featuring a gradient conductive network structure and three-dimensional dual-continuous network structure is constructed in a carbon nanotubes/cellulose-boron nitride/poly(vinyl alcohol)(...In this study,an architecture featuring a gradient conductive network structure and three-dimensional dual-continuous network structure is constructed in a carbon nanotubes/cellulose-boron nitride/poly(vinyl alcohol)(CNT/cellulose-BN/PVA)composite.Using cellulose aerogel as a template,CNT were incorporated into the cellulose template by vertically impregnating the CNT suspension.Following the impregnation of BN/PVA and high-pressure compression,three-dimensional dual-continuous network structure was successfully constructed in the CNT/cellulose-BN/PVA composite.The comprehensive performance of the composite,including electromagnetic interference(EMI)shielding and Joule heating performance,was investigated.The results indicate that the total EMI shielding effectiveness(SE)for the CNT/cellulose-BN/PVA composite reveals similar values for electromagnetic waves incident from different directions,but totally different shielding mechanisms.For the CNT/cellulose-BN/PVA composite with three impregnation cycles of CNT,the EMI SE values exceeded 39 dB for electromagnetic waves incident from both the high-and low-CNT-content sides.93%of the microwaves were reflected when electromagnetic waves were incident from the high-CNT-content side,while the reflection coefficient decreased to 0.44 for the transverse direction.In addition,the construction of the dual-continuous network structure enabled the composite to exhibit both excellent electrical conductivity and good thermal conductivity simultaneously,endowing the material with good Joule heating performance.CNT/cellulose-BN/PVA composite films have significant potential for application as EMI shielding materials in extremely cold weather.展开更多
Anammox bacteria in constructed wetlands(CWs)play pivotal role in sustainable nitrogen transformation,yet existing studies lack comprehensive analysis of environmental gradients and microbial interactions,both key fac...Anammox bacteria in constructed wetlands(CWs)play pivotal role in sustainable nitrogen transformation,yet existing studies lack comprehensive analysis of environmental gradients and microbial interactions,both key factors in anammox bacteria enrichment.This study investigated the mechanisms driving anammox bacteria enrichment in lab-scale simulated CWs treating high-nitrogen wastewater,focusing on bacterial community re-sponses across wetland layers with various strategies,including continuous up-flow influent,nitrogen loading increase,effluent recirculation,intermittent influent,and anammox bacteria inoculation.Results showed that total relative and absolute abundances of anammox bacteria ranged from 0.77%to 12.50%and from 0.13 to 6.46×10^(7) copies/g,respectively.Dissolved oxygen and pH had significant positive correlations with the absolute abundance of anammox bacteria,while organic matter and nitrate negatively impacted their relative abundance.Permutational multivariate analysis of variance indicated that spatial heterogeneity explained more variation in anammox bacteria abundance(43.44%)compared to operational strategies(8.58%).In terms of microbial interactions,60 dominant species exhibited potential correlations with anammox bacteria,comprising 170 interactions(105 positive and 65 negative),which suggested that anammox bacteria generally foster cooperative relationships with dominant bacteria.Notably,significant interspecies interactions were observed between Candidatus Kuenenia(dominant anammox bacteria in CWs)and species within the genera Chitinivibrio-nia and Anaerolineaceae,suggesting that microbial interactions primarily manifest as indirect facilitative effects rather than direct mutualistic relationships.Given that the Normalized Stochasticity Ratio in CWs were<50%,this study inferred that environmental gradients have greater influence on anammox bacteria than microbial interactions.展开更多
The osteochondral(OC)interface exhibits a mineral gradient,varying in thickness by several hundred micrometers across different species.Disruptions in this interface damage OC tissues,leading to osteoarthritis.The nat...The osteochondral(OC)interface exhibits a mineral gradient,varying in thickness by several hundred micrometers across different species.Disruptions in this interface damage OC tissues,leading to osteoarthritis.The natural architecture and composition of native OC interfaces can be replicated using biomaterial scaffolds via regenerative engineering approaches.A novel one-step bioextrusion process was employed to fabricate a unitary synthetic graft(USG),which mimics the native OC interface’s mineral concentration gradient.This novel USG is composed of an agarose-based cartilage layer and a bone layer,consisting of agarose enriched with 20%(200 g/L)hydroxyapatite.The USG features a gradient interface with mineral concentrations transitioning from 0%to 20%(mass fraction),mimicking the transition between the cartilage and bone.Thermogravimetric analysis revealed that the gradient transition lengths of the graft and native OC tissue harvested from bovine knees were similar((647±21)vs.(633±124)μm).The linear viscoelastic properties of the grafts,which were evaluated using strain sweep and frequency sweep tests with oscillatory shear,indicated a dominant storage modulus over loss modulus similar to that of native OC tissues.The compressive and stress relaxation behaviors of the USGs demonstrated that the graft maintained structural integrity under mechanical stress.Viability assays performed after bioextrusion showed that chondrocytes and human fetal osteoblast cells successfully integrated and survived within their designated regions of the graft.The novel USGs exhibit properties similar to native OC tissue and are promising candidates for regenerating OC defects and restoring knee joint functionality.展开更多
The S38C railway axle undergoes induction hardening,resulting in a gradient-distributed microstructure and mechanical properties.The accurate identification of gradient-distributed plastic parameters for the S38C axle...The S38C railway axle undergoes induction hardening,resulting in a gradient-distributed microstructure and mechanical properties.The accurate identification of gradient-distributed plastic parameters for the S38C axle remains a challenging task.To tackle this challenge,the present study proposes a novel approach for identifying the gradient-distributed plastic parameters for the S38C axle by integrating nano-indentation techniques with the machine learning method.Firstly,nano-indentation tests are conducted along the radial direction of the S38C axle to obtain the gradient-distributed load-displacement curves,nano-hardness,and elastic modulus.Subsequently,the dimensionless analysis is performed to obtain the representative stress,strain,and yield stress from load-displacement curves.These parameters are then incorporated into the machine learning method as physical information to identify the gradient-distributed plastic parameters of the S38C axle.The results indicate that the proposed method based on the physics-informed neural network and multi-fidelity neural network successfully identifies the gradient-distributed plastic parameters of the S38C axles and demonstrates superior prediction accuracy and generalization compared with the purely data-driven machine learning method.展开更多
Gradient refractive index(GRIN)metalenses are increasingly valued in high-frequency communication due to their exceptional radiation performance.Ceramics with high dielectric constants and low dielectric losses are id...Gradient refractive index(GRIN)metalenses are increasingly valued in high-frequency communication due to their exceptional radiation performance.Ceramics with high dielectric constants and low dielectric losses are ideal candidates for GRIN metalenses.Digital light processing(DLP)3D printing provides a feasible and efficient approach for manufacturing ceramic GRIN metalenses.However,the scattering of ultraviolet(UV)light by ceramic particles in the slurry reduces the printing accuracy of DLP technology,making it difficult to achieve the intricate structural features required for GRIN metalenses in high-frequency communication.In this work,we propose an approach to improve printing accuracy by optimizing the ceramic slurry composition and implementing a dimensional compensation design strategy.Utilizing geometric optics and the S-parameter inversion method,we design a GRIN metalens consisting of two distinct types of subwavelength unit cells(Y-shaped and circular hole geometries)with a minimum feature size of 160μm.Through a refined slurry formulation and precise design parameter compensation,high-fidelity ceramic GRIN metalenses are successfully fabricated.The fabricated metalens exhibits a maximum gain enhancement of 18.4 dBi and a deflection angle of±30°over a bandwidth of 37.84% in the W-band(75-110 GHz).The highly directional far-field beam radiation and efficient beam steering capabilities highlight the potential of ceramic GRIN metalenses for applications in satellite communications,radar systems,and other high-frequency technologies.展开更多
The migration mechanisms of ore-forming fluids have long been a focus in the field of ore deposit studies.Calcite is ubiquitously present in various types of rocks in the lithosphere,and the underlying mechanisms of i...The migration mechanisms of ore-forming fluids have long been a focus in the field of ore deposit studies.Calcite is ubiquitously present in various types of rocks in the lithosphere,and the underlying mechanisms of its influence on fluid migration are of crucial importance.While previous studies have revealed that salinity changes can modulate fluid migration,the underlying mechanisms remain poorly understood.We employ molecular dynamics simulations to elucidate how salinity variations in ore-forming fluids modulate the adsorption onto calcite nanopore walls,thereby revealing the microscopic mechanisms governing ore fluid transport through calcite nano-fractures.The results show that the adsorption energy Eint of the solution on the calcite surface increased from -14,948.84±182.48 kcal/mol to -12,144.08±118.2 kcal/mol as salinity increased,which is conducive to the long-range transport of the fluid in the calcite nanopore.展开更多
To investigate the evolution of grain orientation and slip modes in magnesium alloys with multiple texture components,an AZ31 gradient-structured magnesium alloy sheet was fabricated using hard plate rolling(HPR).The ...To investigate the evolution of grain orientation and slip modes in magnesium alloys with multiple texture components,an AZ31 gradient-structured magnesium alloy sheet was fabricated using hard plate rolling(HPR).The changes in texture and slip modes under different reductions were examined.The results demonstrate that the AZ31 magnesium alloy sheets display a self-epitaxial gradient structure,with the best mechanical properties observed at rolling temperature of 673 K and reduction of 50%.Significant changes in texture type and strength are observed along the normal direction(ND)of the sheet.The coarse-grain region exhibits a bimodal texture aligned with the rolling direction.These texture variations enhance the stress distribution at the fine grain-coarse grain interface,influencing the grain orientation and the activation of different slip modes,thus improving the mechanical properties of gradient-structured magnesium alloy sheets.This approach offers a new strategy for the fabrication of high-performance magnesium alloy sheets.展开更多
The development of gradient lubrication materials is critical for numerous biomedical applications,particularly in magnifying mechanical properties and service longevity.Herein,we present an innovative approach to fab...The development of gradient lubrication materials is critical for numerous biomedical applications,particularly in magnifying mechanical properties and service longevity.Herein,we present an innovative approach to fabricate biomimetic gradient lubrication hydrogel through the synergistic integration of three-dimensional(3D)printed metal-organic frameworks(MOFs)nanoparticle network hydrogel skeletons with bioinspired lubrication design.Specifically,robust hydrogel skeletons were engineered through single or multi-material 3D printing,followed by the in situ growth of MOFs nanoparticles within this hydrogel network to create a reinforced,load-bearing architecture.Subsequently,biomimetic lubrication capability was enabled by mechanically coupling another lubricating hydrogel within 3D-printed MOFs nanoparticle network hydrogel skeleton.The superficial layer is highly lubricious to ensure low coefficient of friction(~0.1141)and wear resistance(40,000 cycles),while the deeper layer is stiffer to afford the obligatory mechanical support(fracture strength~2.50 MPa).Furthermore,the gradient architecture stiffness of the hydrogel can be modulated by manipulating the spatial distribution of MOFs within the 3D-printed hydrogel skeleton.As a proof-of-concept,biomimetic gradient hydrogel meniscus structures with C-and O-shaped configurations were constructed by leveraging multi-material 3D printing,demonstrating exceptional lubrication performance.This innovative biomimetic design opens new avenues for creating implantable biomedical gradient lubricating materials with reinforced mechanical and lubrication performance.展开更多
Gradient microstructures strengthened by serrated Grain Boundaries(GBs)were achieved through a combination of Gradient Strain Deformation(GSD)and Serration Heat Treatment(SHT),with particular focus on microstructural ...Gradient microstructures strengthened by serrated Grain Boundaries(GBs)were achieved through a combination of Gradient Strain Deformation(GSD)and Serration Heat Treatment(SHT),with particular focus on microstructural evolution,underlying mechanisms,and the critical influencing factors.Dynamic recrystallization governed the microstructural evolution in the fine-grained and transition regions during GSD,where multiple nucleation mechanisms were active.Plastic deformation facilitated the dissolution ofγ'phase in fine-grained regions,ultimately resulting in its morphological transformation.During the subsequent SHT,serrated GBs formed within the gradient microstructures produced by prior GSD without disrupting the grain size gradient,thereby enhancing creep resistance.Two distinct mechanisms associated withγ'gbparticles governed the formation of the serrations at GBs.Owing to the stronger dragging effect of grain boundary junctions in fine-grained regions,the amplitude and wavelength of serrations in these regions were smaller than those in coarse-grained regions.Moreover,the formation of serrations exhibited a strong dependence on the inherent properties of the GBs.The random high-angle grain boundaries(HAGBs)with misorientation angles in the range of 30-59°tended to become serrated more easily during SHT due to their high mobility and the accelerated precipitation ofγ'gbparticles at them.Low-ΣHAGBs and low-angle GBs were not prone to form serrations.In particular,serration formation was completely inhibited atΣ3 twin boundaries due to their extremely low mobility and the absence ofγ'gbparticles.展开更多
Radiative cooling textiles with spectrally selective surfaces offer a promising energy-efficient approach for sub-ambient cooling of outdoor objects and individuals.However,the spectrally selective mid-infrared emissi...Radiative cooling textiles with spectrally selective surfaces offer a promising energy-efficient approach for sub-ambient cooling of outdoor objects and individuals.However,the spectrally selective mid-infrared emission of these textiles significantly hinders their efficient radiative heat exchange with self-heated objects,thereby posing a significant challenge to their versatile cooling applicability.Herein,we present a bicomponent blow spinning strategy for the production of scalable,ultra-flexible,and healable textiles featuring a tailored dual gradient in both chemical composition and fiber diameter.The gradient in the fiber diameter of this textile introduces a hierarchically porous structure across the sunlight incident area,thereby achieving a competitive solar reflectivity of 98.7%on its outer surface.Additionally,the gradient in the chemical composition of this textile contributes to the formation of Janus infrared-absorbing surfaces:The outer surface demonstrates a high mid-infrared emission,whereas the inner surface shows a broad infrared absorptivity,facilitating radiative heat exchange with underlying self-heated objects.Consequently,this textile demonstrates multi-scenario radiative cooling capabilities,enabling versatile outdoor cooling for unheated objects by 7.8℃ and self-heated objects by 13.6℃,compared to commercial sunshade fabrics.展开更多
Fluid dynamic research on rectangular and trapezoidal fins is aimed at increasing heat transfer by means of large surfaces.The trapezoidal cavity form is compared with its thermal and flow performance,and it is reveal...Fluid dynamic research on rectangular and trapezoidal fins is aimed at increasing heat transfer by means of large surfaces.The trapezoidal cavity form is compared with its thermal and flow performance,and it is revealed that trapezoidal fins tend to be more efficient,particularly when material optimization is critical.Motivated by the increasing need for sustainable energy management,this work analyses the thermal performance of inclined trapezoidal and rectangular porous fins utilising a unique hybrid nanofluid.The effectiveness of nanoparticles in a working fluid is primarily determined by their thermophysical properties;hence,optimising these properties can significantly improve overall performance.This study considers the dispersion of Graphene Oxide(GO)and Molybdenum Disulfide in the base fluid,engine oil.Temperature profiles are analysed by altering the radiative,porosity,wet porous,and angle of inclination parameters.Surface and contour plots are constructed by using the Lobatto IIIa Collocation Method with BVP5C solver in MATLAB and Gradient Descent Optimisation to predict the combined heat transfer rate.According to the study,fluid temperature consistently decreases when the angle of inclination,wet porous parameter,porosity parameter,and radiative parameter increase,suggesting significantly improved heat dissipation.The trapezoidal fin consistently exhibits a superior heat transfer mechanism than a rectangular fin.It is found that the trapezoidal fin transmits heat at a rate that is 0.05%higher than that of the rectangular fin.Validation of the present study is done through the comparison of previous studies.This research provides useful design insights for sophisticated engineering uses,including electrical cooling devices,heat exchangers,radiators,and solar heaters.展开更多
Transforming urban spatial structures to promote green and low-carbon development is an effective strategy.Although prior studies have examined the impact of urban polycentricity on carbon emissions and economic devel...Transforming urban spatial structures to promote green and low-carbon development is an effective strategy.Although prior studies have examined the impact of urban polycentricity on carbon emissions and economic development,research on its role in the synergistic relationship between these factors regarding carbon emission efficiency is limited.Furthermore,existing literature often overlooks nonlinear effects and interactions with other urban variables.This paper analyzed data from 295 Chinese cities in 2020,calculating urban population polycentricity,population dispersion indices,and carbon emission efficiency.Utilizing local spatial autocorrelation tools,we reveal interactions among urban population polycentricity,dispersion,carbon emissions,and carbon emission efficiency.We then employ a gradient boosting decision tree model(GBDT)to explore nonlinear and synergistic effects of polycentric urbanization.Key findings include:1)polycentric urbanization in Chinese cities exhibits significant spatial differentiation characteristics.The Polycentricity index is relatively high in economically developed eastern coastal regions with an overall low level,carbon emissions are concentrated in industrialized north-central cities and some Yangtze River Delta hubs,and carbon emission efficiency is the highest in the Yangtze River Delta while relatively low in Northeast China;there are significant spatially heterogeneous interaction characteristics among population polycentricity,population dispersion,carbon emissions,and carbon emission efficiency.2)Urban population polycentricity contributes 9.42%to total carbon emissions and 6.24%to carbon emission efficiency.3)The polycentricity index has a nonlinear impact on carbon emissions and carbon emission efficiency:no significant effect when below 0.50 or above 0.55,increased carbon emissions in 0.50-0.53,and reduced carbon emissions with improved efficiency in 0.53-0.55.4)The polycentricity index has an interaction effect with other variables;specifically,when the polycentricity index is between 0.53 and 0.55,its interaction with urban gross domestic product(GDP),urban population,urban built-up area,green coverage rate in built-up areas,urban technological expenditure,and the proportion of the output value of the secondary industry will reduce carbon emissions and improve carbon emission efficiency.These findings enhance the understanding of urban spatial structures and carbon emissions,providing valuable insights for policymakers in developing green and low-carbon strategies.展开更多
基金National Defense Basic Scientific Research Program of China(JCKY2020408B002,WDZC2022-12)Key Research and Development Program of Shanxi Province(202102050201011,202202050201014)Fundamental Research Program of Shanxi Province(20210302124178,20210302123061,202103021224183)。
文摘A gradient structure was introduced into a metal laminated target plate,and the anti-penetration simulation of the gradient structure was compared with that of a uniform-layer-thickness target plate by finite element simulation.The analysis was verified by an impact experiment.Results show that the high-level thickness and appropriate percentage of Ti alloy at the upper side of the gradient structure provide greater impact resistance against the bullet,which increases the warhead breakage and enhances the anti-penetration performance.In addition,during the impact process,the stress is transmitted and reflected in the form of waves in each layer of the target plate,and the interaction between the compression and tension waves causes non-synergistic deformation of the target plate and leads to delamination.The gradient target plate takes penetration resistance a step further through the higher energy absorption rate and more consumption of the bullet kinetic energy.This research provides a theoretical basis for the application of gradient structures in metallic laminated armor.
基金supported by the National Key Research and Development Program of China(2023YFB3809300).
文摘Recycling spent lithium-ion(Li+)batteries is critical for achieving environmental conservation and the strategic recovery of essential resources.Compared with conventional methods for recovering cathode materials,which are energy-intensive and prone to secondary pollution,the direct regeneration approach has emerged as a rapid and highly efficient method,gaining widespread attention in recent years.However,this approach faces major challenges,including degraded electrochemical performances and limited economic value.This study,therefore,proposes a high-value direct regeneration strategy to convert degraded spent LiFePO_(4)(S-LFP)into a gradient manganese(Mn)-doped regenerated LiFe_(0.7)Mn_(0.3)PO_(4)/C(R-LFMP)composite.This method leverages the inherent microcracks and Li vacancies present in S-LFP,likely acting as diffusion channels for the Mn^(2+)/Li^(+)ions.Through a two-step mechanochemical ball-milling and carbothermal reduction process,this approach achieves simultaneous Li replenishment and surface-localised Mn gradient doping with enhanced structural control.Notably,the R-LFMP exhibits an exceptional electrochemical performance.At 0.1 C,it delivers a discharge capacity of 161.4 mA h g^(−1)and an energy density of 563.5 Wh kg^(−1)(representing a 60.5%improvement over S-LFP).Additionally,it maintains 83%capacity retention after 900 cycles at 0.5C,a considerable enhancement compared to commercial LFMP(62%).Furthermore,the regenerated cathode material generates a net profit of$7.102 kg^(−1),surpassing the profitability of conventional recycling methods by 90%.Overall,this study introduces a transformative and sustainable LFP regeneration technology,achieving breakthroughs in electrochemical restoration and high-value recycling,while paving the way for the closed-loop utilisation of LFP-based energy storage systems.
基金supported by the National Natural Science Foundation of China (Grant Nos.12274313 and 62375234)the Gusu Leading Talent Plan for Scientific and Technological Innovation and Entrepreneurship (Grant No.ZXL2024400)。
文摘Optical phase-gradient metasurfaces have garnered significant attention for enabling flexible light manipulation,with applications across diverse domains.In this work,we will demonstrate that the metasurfaces with phase gradient modulation can be used to achieve illusion optics,featuring the advantages of simple geometric structure and feasible implementation compared with the well-known transformation optics method.The underlying mechanism is the anomalous diffraction law caused by the phase gradient,which provides a theoretical basis for freely manipulating the propagation path of light.By considering a specific example,we will demonstrate that the phase gradient can transform spatial coordinates in real space into illusion space,thereby converting a plane in real space into a curved surface structure in illusion space to achieve the illusion effect.This approach provides a viable alternative to transformation optics for designing illusion devices.
基金financially supported by the National Natural Science Foundation of China(22378428,22138013)the National Key Research and Development Program of China(2023YFB4104500,2023YFB4104503)+1 种基金the Key Research and Development Program of Shandong Province(2024ZLGX08)the Science and Technology Innovation Project of the Shandong Energy Group Co.,Ltd.(SNKJ2023A03)。
文摘Electrocatalytic CO_(2) reduction(CO_(2) RR)toward multi-carbon compounds is a challenging but meaningful route for carbon cycling.Copper-based catalysts are the most promising candidate for C_(2+)generation due to their unique C–C coupling activity,yet the in situ reduction from Cu^(+) to Cu^(0) under cathodic potentials causes the catalyst deactivation.Herein,we develop a transient thermal shock strategy to embed Cu^(+) species into CeO_(2) lattices,constructing a CuO_(x)/CuCeO_(x)catalyst with a radial gradient Cu^(+) -Ov-Ce^(3+)/Ce^(4+)structure.Depth-profiling X-ray photoelectron spectroscopy(XPS)and density functional theory(DFT)calculations reveal that mismatched metal/oxygen diffusion kinetics drive continuous electron transfer from surface Cu^(+) to bulk Ce^(3+)/Ce^(4+)via oxygen vacancies(Ov),forming a dynamic“self-sacrificial”structure to preserve surface Cu^(+) states.In CO_(2)-saturated 0.1 M KHCO_(3),the optimized CuO_(x)/CuCeO_(x)-10 achieves a high C_(2) Faradaic efficiency(FE)of 85.8%at-1.4 V vs.RHE.In situ attenuated total reflection surface-enhanced infrared adsorption spectroscopy(ATR-SEIRAS)identifies the key intermediates of C_(2) are*OCCO and*OCCOH,while DFT reveals a drastic reduction of C–C coupling barrier from 0.842 to0.274 eV.This work demonstrates kinetically tailored metal-support interactions,enabling oxidationstate control for pathway-selective catalysis.
基金supported by the National Natural Science Foundation of China(Nos.42072229,42030301,41102131,41972049,41972302 and 41977231)the Guangdong Basic and Applied Basic Research Foundation(No.2025A1515010724)+3 种基金the Guangdong Natural Science Foundation(No.2021A1515011658)the Science and Technology Program of Guangzhou(No.202002030184)the Special Fund for Basic Scientific Research of Central Colleges,Chang'an University(No.300102260502)the Deep Earth Probe and Mineral Resources Exploration-National Science and Technology Major Project(No.2024ZD1001003)。
文摘The paleo-geothermal gradient is a crucial parameter for converting the thermal history to the exhumation history.However,the precise estimation of this parameter has been a challenge.This paper presents a simple two-step method to model the paleo-geothermal gradient using low-temperature thermochronology.(1)It uses the Monte Carlo approach to generate thermal histories in a vertical section randomly and calculates the entire thermal history within the goodnessof-fit thresholds based on different paleo-geothermal gradients.(2)It selects the optimum paleogeothermal gradient by comparing the entire thermal history within different goodness-of-fit thresholds.We validated the method with apatite(U-Th)/He and fission track data collected from two drill cores in the Haiyuan-Liupanshan region.The result revealed that the best-fit paleo-geothermal gradient was~42℃/km during the Early Cretaceous–Miocene and has decreased rapidly to 20℃/km since~10 Ma.The crust thickening in the study area may explain the rapid reduction in the paleogeothermal gradient since~10 Ma.Our results are consistent with earlier studies in the region,suggesting that our simple and more intuitive approach provides an alternative method for paleogeothermal gradient modeling.
文摘Transformer models face significant computational challenges in private inference(PI).Existing optimization methods often rely on isolated techniques,neglecting joint structural and operational improvements.We propose IG-3D,a unified framework that integrates structured compression and operator approximation through accurate importance assessment.Our approach first evaluates attention head importance using Integrated Gradients(IG),offering greater stability and theoretical soundness than gradient-based methods.We then apply a threedimensional optimization:(1)structurally pruning redundant attention heads;(2)replacing Softmax with adaptive polynomial approximation to avoid exponential computations;(3)implementing layer-wise GELU substitution to accommodate different layer characteristics.A joint thresholdmechanism coordinates compression across dimensions under accuracy constraints.Experimental results on the GLUE benchmark show that our method achieves an average 2.9×speedup in inference latency and a 50%reduction in communication cost,while controlling the accuracy loss within 2.3%,demonstrating significant synergistic effects and a superior accuracy-efficiency trade-off compared to single-technique optimization strategies.
基金supported by grants from the National Natural Science Foundation of China(Grant No.32360333)the Guizhou Provincial Science and Technology Projects(Grant Nos.ZK[2022]540 and[2023]099)+1 种基金the Survey of Amphibian and Reptile Resources in Leigongshan National Nature Reserve and Literature Publishing Services(P5226002023000019)the Guizhou Provincial Science and Technology Innovation Talent Team Construction Project 2024[Qian Ke He Talent CXTD(2025)053].
文摘Dear Editor,Mountain systems have long been refuges for many species,often viewed as"islands"that promote speciation due to geographic isolation(Rahbek et al.,2019).Their high environmental heterogeneity fosters centers of endemism,and they harbor over 85%of global species diversity(Zhao et al.,2022).Consequently,mountains are key systems for exploring biodiversity patterns along elevational gradients,where species richness often follows four recognized models:monotonic decrease,unimodal pattern(forward and backward peak patterns),and low plateau followed by a decrease along the elevational gradient(McCain et al.,2010).
基金supported by the National Research Foundation of Korea(NRF)grants(Grant Nos.RS-2020-NR049594 and RS-2022-NR071877)the Korea Agency for Infrastructure Technology Advancement under the Ministry of Land,Infrastructure and Transport(Grant No.RS-2024-00410248).
文摘Suffusion refers to the loss of fineparticles within the soil matrix without any associated volume change,induced by hydrodynamic forces.This study investigated the suffusion of sand-clay mixtures through one-dimensional soil column experiments under a stepwise increase in hydraulic gradient(i),aiming to evaluate the critical hydraulic gradient(icrit)as a function of the size ratio between sand and clay,clay type,and ionic concentration.It was found that icrit was less than 0.1 for all sand-clay mixtures examined in this study.In addition,the lower peak concentrations of filtrated clay observed in sand-illite mixtures,compared to those of sand-kaolinite mixtures at the same level of i,suggest that illite particles are more susceptible to suffusion.Overall,the observed breakthrough curves,mass fraction of filtrated clay,volume of outflow,and total injection time presented in this study highlight the importance of considering clay type,sand-to-clay size ratio,and ionic concentration when assessing the suffusion behavior of clay-containing soils under a stepwise increase in hydraulic gradient.
基金financially supported by the National Natural Science Foundation of China(No.52103127)the Opening Project of the State Key Laboratory of Polymer Materials Engineering(Sichuan University)(No.sklpme2022-4-10)Shaanxi Provincial Science and Technology Department(No.2025GH-YBXM-042).
文摘In this study,an architecture featuring a gradient conductive network structure and three-dimensional dual-continuous network structure is constructed in a carbon nanotubes/cellulose-boron nitride/poly(vinyl alcohol)(CNT/cellulose-BN/PVA)composite.Using cellulose aerogel as a template,CNT were incorporated into the cellulose template by vertically impregnating the CNT suspension.Following the impregnation of BN/PVA and high-pressure compression,three-dimensional dual-continuous network structure was successfully constructed in the CNT/cellulose-BN/PVA composite.The comprehensive performance of the composite,including electromagnetic interference(EMI)shielding and Joule heating performance,was investigated.The results indicate that the total EMI shielding effectiveness(SE)for the CNT/cellulose-BN/PVA composite reveals similar values for electromagnetic waves incident from different directions,but totally different shielding mechanisms.For the CNT/cellulose-BN/PVA composite with three impregnation cycles of CNT,the EMI SE values exceeded 39 dB for electromagnetic waves incident from both the high-and low-CNT-content sides.93%of the microwaves were reflected when electromagnetic waves were incident from the high-CNT-content side,while the reflection coefficient decreased to 0.44 for the transverse direction.In addition,the construction of the dual-continuous network structure enabled the composite to exhibit both excellent electrical conductivity and good thermal conductivity simultaneously,endowing the material with good Joule heating performance.CNT/cellulose-BN/PVA composite films have significant potential for application as EMI shielding materials in extremely cold weather.
基金supported by Natural Science Foundation of Xiamen,China(No.3502Z20227232)the STS Project of Fujian-CAS(No.2023T3018)Bureau of International Cooperation,Chinese Academy of Sciences(No.322GJHZ2022035MI).
文摘Anammox bacteria in constructed wetlands(CWs)play pivotal role in sustainable nitrogen transformation,yet existing studies lack comprehensive analysis of environmental gradients and microbial interactions,both key factors in anammox bacteria enrichment.This study investigated the mechanisms driving anammox bacteria enrichment in lab-scale simulated CWs treating high-nitrogen wastewater,focusing on bacterial community re-sponses across wetland layers with various strategies,including continuous up-flow influent,nitrogen loading increase,effluent recirculation,intermittent influent,and anammox bacteria inoculation.Results showed that total relative and absolute abundances of anammox bacteria ranged from 0.77%to 12.50%and from 0.13 to 6.46×10^(7) copies/g,respectively.Dissolved oxygen and pH had significant positive correlations with the absolute abundance of anammox bacteria,while organic matter and nitrate negatively impacted their relative abundance.Permutational multivariate analysis of variance indicated that spatial heterogeneity explained more variation in anammox bacteria abundance(43.44%)compared to operational strategies(8.58%).In terms of microbial interactions,60 dominant species exhibited potential correlations with anammox bacteria,comprising 170 interactions(105 positive and 65 negative),which suggested that anammox bacteria generally foster cooperative relationships with dominant bacteria.Notably,significant interspecies interactions were observed between Candidatus Kuenenia(dominant anammox bacteria in CWs)and species within the genera Chitinivibrio-nia and Anaerolineaceae,suggesting that microbial interactions primarily manifest as indirect facilitative effects rather than direct mutualistic relationships.Given that the Normalized Stochasticity Ratio in CWs were<50%,this study inferred that environmental gradients have greater influence on anammox bacteria than microbial interactions.
基金supported by the School of Engineering and Digital Sciences of Nazarbayev University,Astana,Kazakhstan(to CE)。
文摘The osteochondral(OC)interface exhibits a mineral gradient,varying in thickness by several hundred micrometers across different species.Disruptions in this interface damage OC tissues,leading to osteoarthritis.The natural architecture and composition of native OC interfaces can be replicated using biomaterial scaffolds via regenerative engineering approaches.A novel one-step bioextrusion process was employed to fabricate a unitary synthetic graft(USG),which mimics the native OC interface’s mineral concentration gradient.This novel USG is composed of an agarose-based cartilage layer and a bone layer,consisting of agarose enriched with 20%(200 g/L)hydroxyapatite.The USG features a gradient interface with mineral concentrations transitioning from 0%to 20%(mass fraction),mimicking the transition between the cartilage and bone.Thermogravimetric analysis revealed that the gradient transition lengths of the graft and native OC tissue harvested from bovine knees were similar((647±21)vs.(633±124)μm).The linear viscoelastic properties of the grafts,which were evaluated using strain sweep and frequency sweep tests with oscillatory shear,indicated a dominant storage modulus over loss modulus similar to that of native OC tissues.The compressive and stress relaxation behaviors of the USGs demonstrated that the graft maintained structural integrity under mechanical stress.Viability assays performed after bioextrusion showed that chondrocytes and human fetal osteoblast cells successfully integrated and survived within their designated regions of the graft.The novel USGs exhibit properties similar to native OC tissue and are promising candidates for regenerating OC defects and restoring knee joint functionality.
基金supported by the National Key Research and Development Plan(Grant No.2022YFB3401901)the National Natural Science Foundation of China(Grant Nos.12192210,12192214,12072295,and 12222209)+1 种基金Independent Project of State Key Laboratory of Rail Transit Vehicle System(Grant No.2023TPL-T03)Fundamental Research Funds for the Central Universities(Grant No.2682023CG004).
文摘The S38C railway axle undergoes induction hardening,resulting in a gradient-distributed microstructure and mechanical properties.The accurate identification of gradient-distributed plastic parameters for the S38C axle remains a challenging task.To tackle this challenge,the present study proposes a novel approach for identifying the gradient-distributed plastic parameters for the S38C axle by integrating nano-indentation techniques with the machine learning method.Firstly,nano-indentation tests are conducted along the radial direction of the S38C axle to obtain the gradient-distributed load-displacement curves,nano-hardness,and elastic modulus.Subsequently,the dimensionless analysis is performed to obtain the representative stress,strain,and yield stress from load-displacement curves.These parameters are then incorporated into the machine learning method as physical information to identify the gradient-distributed plastic parameters of the S38C axle.The results indicate that the proposed method based on the physics-informed neural network and multi-fidelity neural network successfully identifies the gradient-distributed plastic parameters of the S38C axles and demonstrates superior prediction accuracy and generalization compared with the purely data-driven machine learning method.
基金financial support by the National Key Research and Development Program of China(No.2023YFB4605400)the National Natural Science Foundation of China(No.12472152)the Department of Science and Technology of Guangdong Province(No.2019QN01Z438)。
文摘Gradient refractive index(GRIN)metalenses are increasingly valued in high-frequency communication due to their exceptional radiation performance.Ceramics with high dielectric constants and low dielectric losses are ideal candidates for GRIN metalenses.Digital light processing(DLP)3D printing provides a feasible and efficient approach for manufacturing ceramic GRIN metalenses.However,the scattering of ultraviolet(UV)light by ceramic particles in the slurry reduces the printing accuracy of DLP technology,making it difficult to achieve the intricate structural features required for GRIN metalenses in high-frequency communication.In this work,we propose an approach to improve printing accuracy by optimizing the ceramic slurry composition and implementing a dimensional compensation design strategy.Utilizing geometric optics and the S-parameter inversion method,we design a GRIN metalens consisting of two distinct types of subwavelength unit cells(Y-shaped and circular hole geometries)with a minimum feature size of 160μm.Through a refined slurry formulation and precise design parameter compensation,high-fidelity ceramic GRIN metalenses are successfully fabricated.The fabricated metalens exhibits a maximum gain enhancement of 18.4 dBi and a deflection angle of±30°over a bandwidth of 37.84% in the W-band(75-110 GHz).The highly directional far-field beam radiation and efficient beam steering capabilities highlight the potential of ceramic GRIN metalenses for applications in satellite communications,radar systems,and other high-frequency technologies.
基金financed jointly by the National Major Science and Technology Special Project on Deep Earth Exploration(2024ZD1001701-5)the National Natural Science Foundation of China(42472127,42172086)+2 种基金the Yunnan Major Project of Basic Research(202401BN070001-002)Yunnan Mineral Resources Prediction and Evaluation Engineering Research Center(2011)Innovation Team Program of Kunming University of Science and Technology,Yunnan Province。
文摘The migration mechanisms of ore-forming fluids have long been a focus in the field of ore deposit studies.Calcite is ubiquitously present in various types of rocks in the lithosphere,and the underlying mechanisms of its influence on fluid migration are of crucial importance.While previous studies have revealed that salinity changes can modulate fluid migration,the underlying mechanisms remain poorly understood.We employ molecular dynamics simulations to elucidate how salinity variations in ore-forming fluids modulate the adsorption onto calcite nanopore walls,thereby revealing the microscopic mechanisms governing ore fluid transport through calcite nano-fractures.The results show that the adsorption energy Eint of the solution on the calcite surface increased from -14,948.84±182.48 kcal/mol to -12,144.08±118.2 kcal/mol as salinity increased,which is conducive to the long-range transport of the fluid in the calcite nanopore.
基金supported by the Natural Science Foundation of Heilongjiang Province,China(No.JQ2022E004)。
文摘To investigate the evolution of grain orientation and slip modes in magnesium alloys with multiple texture components,an AZ31 gradient-structured magnesium alloy sheet was fabricated using hard plate rolling(HPR).The changes in texture and slip modes under different reductions were examined.The results demonstrate that the AZ31 magnesium alloy sheets display a self-epitaxial gradient structure,with the best mechanical properties observed at rolling temperature of 673 K and reduction of 50%.Significant changes in texture type and strength are observed along the normal direction(ND)of the sheet.The coarse-grain region exhibits a bimodal texture aligned with the rolling direction.These texture variations enhance the stress distribution at the fine grain-coarse grain interface,influencing the grain orientation and the activation of different slip modes,thus improving the mechanical properties of gradient-structured magnesium alloy sheets.This approach offers a new strategy for the fabrication of high-performance magnesium alloy sheets.
基金support from the National Key Research and Development Program of China(2022YFB4600101)the National Natural Science Foundation of China(52505231 and 52175201)+5 种基金the Key R&D Program of Shandong Province(2024CXPT035)the Research Program of Science and Technology Department of Gansu Province(24JRRA059,24JRRA044 and 24ZDGA014)the Science Fund of Shandong Laboratory of Advanced Materials and Green Manufacturing at Yantai(AMGM2024F12)the Innovation and Entrepreneurship Team Prject of YEDA(2021TD007)the Special Supporting Project for Provincial Leading Talents of Yantai,the Major Program(ZYFZFX-2)the Fundamental Research Special Zone Project of the Lanzhou Institute of Chemical Physics,CAS,the Special Research Assistant Project of the Chinese Academy of Sciences,and the Taishan Scholars Program.
文摘The development of gradient lubrication materials is critical for numerous biomedical applications,particularly in magnifying mechanical properties and service longevity.Herein,we present an innovative approach to fabricate biomimetic gradient lubrication hydrogel through the synergistic integration of three-dimensional(3D)printed metal-organic frameworks(MOFs)nanoparticle network hydrogel skeletons with bioinspired lubrication design.Specifically,robust hydrogel skeletons were engineered through single or multi-material 3D printing,followed by the in situ growth of MOFs nanoparticles within this hydrogel network to create a reinforced,load-bearing architecture.Subsequently,biomimetic lubrication capability was enabled by mechanically coupling another lubricating hydrogel within 3D-printed MOFs nanoparticle network hydrogel skeleton.The superficial layer is highly lubricious to ensure low coefficient of friction(~0.1141)and wear resistance(40,000 cycles),while the deeper layer is stiffer to afford the obligatory mechanical support(fracture strength~2.50 MPa).Furthermore,the gradient architecture stiffness of the hydrogel can be modulated by manipulating the spatial distribution of MOFs within the 3D-printed hydrogel skeleton.As a proof-of-concept,biomimetic gradient hydrogel meniscus structures with C-and O-shaped configurations were constructed by leveraging multi-material 3D printing,demonstrating exceptional lubrication performance.This innovative biomimetic design opens new avenues for creating implantable biomedical gradient lubricating materials with reinforced mechanical and lubrication performance.
基金co-supported by the National Natural Science Foundation of China(Nos.52305421 and 52175363)the General Research Fund of Hong Kong,China(No.15223520)the projects from the Hong Kong Polytechnic University,China(Nos.4-W418,1-ZE1W,4-WZ4W and 1-CD4H)。
文摘Gradient microstructures strengthened by serrated Grain Boundaries(GBs)were achieved through a combination of Gradient Strain Deformation(GSD)and Serration Heat Treatment(SHT),with particular focus on microstructural evolution,underlying mechanisms,and the critical influencing factors.Dynamic recrystallization governed the microstructural evolution in the fine-grained and transition regions during GSD,where multiple nucleation mechanisms were active.Plastic deformation facilitated the dissolution ofγ'phase in fine-grained regions,ultimately resulting in its morphological transformation.During the subsequent SHT,serrated GBs formed within the gradient microstructures produced by prior GSD without disrupting the grain size gradient,thereby enhancing creep resistance.Two distinct mechanisms associated withγ'gbparticles governed the formation of the serrations at GBs.Owing to the stronger dragging effect of grain boundary junctions in fine-grained regions,the amplitude and wavelength of serrations in these regions were smaller than those in coarse-grained regions.Moreover,the formation of serrations exhibited a strong dependence on the inherent properties of the GBs.The random high-angle grain boundaries(HAGBs)with misorientation angles in the range of 30-59°tended to become serrated more easily during SHT due to their high mobility and the accelerated precipitation ofγ'gbparticles at them.Low-ΣHAGBs and low-angle GBs were not prone to form serrations.In particular,serration formation was completely inhibited atΣ3 twin boundaries due to their extremely low mobility and the absence ofγ'gbparticles.
基金financial support from the National Natural Science Foundation of China(Grant No.52273067,52233006)the Fundamental Research Funds for the Central Universities(Grant No.2232023A-03)+3 种基金the Shuguang Program of Shanghai Education Development Foundation and Shanghai Municipal Education Commission(Grant No.23SG29)the Natural Science Foundation of Shanghai(Grant No.24ZR1402400)the Shanghai Scientific and Technological Innovation Project(Grant No.24520713000)Innovation Program of Shanghai Municipal Education Commission(Grant No.2021-01-07-00-03-E00108).
文摘Radiative cooling textiles with spectrally selective surfaces offer a promising energy-efficient approach for sub-ambient cooling of outdoor objects and individuals.However,the spectrally selective mid-infrared emission of these textiles significantly hinders their efficient radiative heat exchange with self-heated objects,thereby posing a significant challenge to their versatile cooling applicability.Herein,we present a bicomponent blow spinning strategy for the production of scalable,ultra-flexible,and healable textiles featuring a tailored dual gradient in both chemical composition and fiber diameter.The gradient in the fiber diameter of this textile introduces a hierarchically porous structure across the sunlight incident area,thereby achieving a competitive solar reflectivity of 98.7%on its outer surface.Additionally,the gradient in the chemical composition of this textile contributes to the formation of Janus infrared-absorbing surfaces:The outer surface demonstrates a high mid-infrared emission,whereas the inner surface shows a broad infrared absorptivity,facilitating radiative heat exchange with underlying self-heated objects.Consequently,this textile demonstrates multi-scenario radiative cooling capabilities,enabling versatile outdoor cooling for unheated objects by 7.8℃ and self-heated objects by 13.6℃,compared to commercial sunshade fabrics.
基金supported by the“Regional Innovation System&Education(RISE)”through the Seoul RISE Center,funded by the Ministry of Education(MOE)and the Seoul Metropolitan Government(2025-RISE-01-027-04).
文摘Fluid dynamic research on rectangular and trapezoidal fins is aimed at increasing heat transfer by means of large surfaces.The trapezoidal cavity form is compared with its thermal and flow performance,and it is revealed that trapezoidal fins tend to be more efficient,particularly when material optimization is critical.Motivated by the increasing need for sustainable energy management,this work analyses the thermal performance of inclined trapezoidal and rectangular porous fins utilising a unique hybrid nanofluid.The effectiveness of nanoparticles in a working fluid is primarily determined by their thermophysical properties;hence,optimising these properties can significantly improve overall performance.This study considers the dispersion of Graphene Oxide(GO)and Molybdenum Disulfide in the base fluid,engine oil.Temperature profiles are analysed by altering the radiative,porosity,wet porous,and angle of inclination parameters.Surface and contour plots are constructed by using the Lobatto IIIa Collocation Method with BVP5C solver in MATLAB and Gradient Descent Optimisation to predict the combined heat transfer rate.According to the study,fluid temperature consistently decreases when the angle of inclination,wet porous parameter,porosity parameter,and radiative parameter increase,suggesting significantly improved heat dissipation.The trapezoidal fin consistently exhibits a superior heat transfer mechanism than a rectangular fin.It is found that the trapezoidal fin transmits heat at a rate that is 0.05%higher than that of the rectangular fin.Validation of the present study is done through the comparison of previous studies.This research provides useful design insights for sophisticated engineering uses,including electrical cooling devices,heat exchangers,radiators,and solar heaters.
基金Under the auspices of National Natural Science Foundation of China(No.42571300)。
文摘Transforming urban spatial structures to promote green and low-carbon development is an effective strategy.Although prior studies have examined the impact of urban polycentricity on carbon emissions and economic development,research on its role in the synergistic relationship between these factors regarding carbon emission efficiency is limited.Furthermore,existing literature often overlooks nonlinear effects and interactions with other urban variables.This paper analyzed data from 295 Chinese cities in 2020,calculating urban population polycentricity,population dispersion indices,and carbon emission efficiency.Utilizing local spatial autocorrelation tools,we reveal interactions among urban population polycentricity,dispersion,carbon emissions,and carbon emission efficiency.We then employ a gradient boosting decision tree model(GBDT)to explore nonlinear and synergistic effects of polycentric urbanization.Key findings include:1)polycentric urbanization in Chinese cities exhibits significant spatial differentiation characteristics.The Polycentricity index is relatively high in economically developed eastern coastal regions with an overall low level,carbon emissions are concentrated in industrialized north-central cities and some Yangtze River Delta hubs,and carbon emission efficiency is the highest in the Yangtze River Delta while relatively low in Northeast China;there are significant spatially heterogeneous interaction characteristics among population polycentricity,population dispersion,carbon emissions,and carbon emission efficiency.2)Urban population polycentricity contributes 9.42%to total carbon emissions and 6.24%to carbon emission efficiency.3)The polycentricity index has a nonlinear impact on carbon emissions and carbon emission efficiency:no significant effect when below 0.50 or above 0.55,increased carbon emissions in 0.50-0.53,and reduced carbon emissions with improved efficiency in 0.53-0.55.4)The polycentricity index has an interaction effect with other variables;specifically,when the polycentricity index is between 0.53 and 0.55,its interaction with urban gross domestic product(GDP),urban population,urban built-up area,green coverage rate in built-up areas,urban technological expenditure,and the proportion of the output value of the secondary industry will reduce carbon emissions and improve carbon emission efficiency.These findings enhance the understanding of urban spatial structures and carbon emissions,providing valuable insights for policymakers in developing green and low-carbon strategies.
