Credit risk is the core issue of supply chain finance. In the supply chain, problems happened in different enterprises can influent the whole to different degrees through transferring, thus statuses of all enterprises...Credit risk is the core issue of supply chain finance. In the supply chain, problems happened in different enterprises can influent the whole to different degrees through transferring, thus statuses of all enterprises and their different influences should be considered when evaluating the supply chain’s credit risk. We examine the characters of supply chain network and complex network, use the local growing complex network to simulate the real supply chain, use cluster analysis to classify the company into several levels;Introducing each level’s self-adaption weight formula according to the company’s quantity and degrees of this level and use the weight to improve the credit evaluation method. The research results indicate that complex network can be used to simulate the supply chain. The credit risk evaluation (CRE) of an enterprise level with bigger note degrees has a greater weight in the supply chain system’s CRE, thus has greater effect on the whole chain. Considering different influences of different enterprise levels can improve credit risk evaluation method’s sensitivity.展开更多
Through studying several kinds of chaotic mappings' distributions of orbital points, we analyze the capabilityof the chaotic mutations based on these mappings. Nunerical experiments support our conclusions very we...Through studying several kinds of chaotic mappings' distributions of orbital points, we analyze the capabilityof the chaotic mutations based on these mappings. Nunerical experiments support our conclusions very well. Thecapability analysis also led to a self-adaptive mechanism of chaotic mutation. The introducing of the self-adaptivechaotic mutation can improve the performance of genetic algorithm very prominently.展开更多
Low-order Duffing and high-order Rossler chaotic oscillator are connected together and new self-adaption frequency detection method is presented. The frequency difference control between unknown signal and the periodi...Low-order Duffing and high-order Rossler chaotic oscillator are connected together and new self-adaption frequency detection method is presented. The frequency difference control between unknown signal and the periodic driving force is realized in this paper and the self-adaption is obtained. Thus, the detection precision and speed are promoted. The limitation that there are too many chaotic oscillators in Duffing system is broken. Meanwhile the disadvantage that the detection speed is lower in R ssler chaotic control is overcome. The self-adaption choice of frequency difference control is realized using the Duffing and Rssler different chaotic oscillators to obtain unknown signal frequency. The simulation results show that the presented method is feasible and effective.展开更多
Octopuses,due to their flexible arms,marvelous adaptability,and powerful suckers,are able to effortlessly grasp and disengage various objects in the marine surrounding without causing devastation.However,manipulating ...Octopuses,due to their flexible arms,marvelous adaptability,and powerful suckers,are able to effortlessly grasp and disengage various objects in the marine surrounding without causing devastation.However,manipulating delicate objects such as soft and fragile foods underwater require gentle contact and stable adhesion,which poses a serious challenge to now available soft grippers.Inspired by the sucker infundibulum structure and flexible tentacles of octopus,herein we developed a hydraulically actuated hydrogel soft gripper with adaptive maneuverability by coupling multiple hydrogen bond-mediated supramolecular hydrogels and vat polymerization three-dimensional printing,in which hydrogel bionic sucker is composed of a tunable curvature membrane,a negative pressure cavity,and a pneumatic chamber.The design of the sucker structure with the alterable curvature membrane is conducive to realize the reliable and gentle switchable adhesion of the hydrogel soft gripper.As a proof-of-concept,the adaptive hydrogel soft gripper is capable of implement diversified underwater tasks,including gingerly grasping fragile foods like egg yolks and tofu,as well as underwater robots and vehicles that station-keeping and crawling based on switchable adhesion.This study therefore provides a transformative strategy for the design of novel soft grippers that will render promising utilities for underwater exploration soft robotics.展开更多
In a meandering fiver, a certain scale of turbulent vortex dominates the development of fiver morphology, making the river bend with s particular curvature. This kind of vortex is denoted as ＂bend-forming vortex＂. T...In a meandering fiver, a certain scale of turbulent vortex dominates the development of fiver morphology, making the river bend with s particular curvature. This kind of vortex is denoted as ＂bend-forming vortex＂. The coordinated relationship of bend-forming vortex and meandering fiver channel is then known as ＂self-adaption feature＂ of rivers. With these two concepts, this paper investigated the stability and self-adaption character of coherent vortex in the U-shape river bend with a constant curvature. On the basis of fluid mechanics theory and in consideration of turbulent coherent vortex as disturbance, the growth rate and the wave number response range of coherent vortex in meandering rivers with different curvatures were calculated in this paper. Moreover, the responses of different scales of coherent turbulence structure to river bend parameters were analyzed to explain the mechanism of fiver bend maintenance. These methods could provide a theoretical basis for further investigation on fiver meandering.展开更多
Trends toward the globalization of the manufacturing industry and the increasing demands for small-batch,short-cycle,and highly customized products result in complexities and fluctuations in both external and internal...Trends toward the globalization of the manufacturing industry and the increasing demands for small-batch,short-cycle,and highly customized products result in complexities and fluctuations in both external and internal manufacturing environments,which poses great challenges to manufacturing enterprises.Fortunately,recent advances in the Industrial Internet of Things(IIoT)and the widespread use of embedded processors and sensors in factories enable collecting real-time manufacturing status data and building cyber–physical systems for smart,flexible,and resilient manufacturing systems.In this context,this paper investigates the mechanisms and methodology of self-organization and self-adaption to tackle exceptions and disturbances in discrete manufacturing processes.Specifically,a general model of smart manufacturing complex networks is constructed using scale-free networks to interconnect heterogeneous manufacturing resources represented by network vertices at multiple levels.Moreover,the capabilities of physical manufacturing resources are encapsulated into virtual manufacturing services using cloud technology,which can be added to or removed from the networks in a plug-and-play manner.Materials,information,and financial assets are passed through interactive links across the networks.Subsequently,analytical target cascading is used to formulate the processes of self-organizing optimal configuration and self-adaptive collaborative control for multilevel key manufacturing resources while particle swarm optimization is used to solve local problems on network vertices.Consequently,an industrial case based on a Chinese engine factory demonstrates the feasibility and efficiency of the proposed model and method in handling typical exceptions.The simulation results show that the proposed mechanism and method outperform the event-triggered rescheduling method,reducing manufacturing cost,manufacturing time,waiting time,and energy consumption,with reasonable computational time.This work potentially enables managers and practitioners to implement active perception,active response,self-organization,and self-adaption solutions in discrete manufacturing enterprises.展开更多
Global warming and energy crisis are two major challenges in the new-century.Wearable materials that enable all-seasonal self-adapting thermal comfort without additional energy-input attract significant attention as a...Global warming and energy crisis are two major challenges in the new-century.Wearable materials that enable all-seasonal self-adapting thermal comfort without additional energy-input attract significant attention as a solution to the increasing severity of extreme climate-change.Inspired by autologous temperature-regulation and multidimensional-sensing origins of nature-skin composed of nature collagen fibers,this study engineered a nanoscale wearable natural fibers-derived thermochromic material(TMEH-skin)for robust all-season self-adapting thermal management by tactically integrating traditional immersion and spraying methods with layer-by-layer stacking-strategy.Because of the on-demand multi-functional layer-structure design,TMEH-skin achieves spontaneous~38.16%visible lightmodulation and~95.1%infrared-emission,demonstrating outstanding double-self-switching thermal management origins by simple color-changing without additional energy-input.Moreover,TMEH-skin has gratifying tensile strength of 13.18 MPa,water vapor permeability,electrical-conductivity,and hydrophobicity,further broadening the application potential and scenarios as wearable materials.In applications for military-missions or reconnaissance behind enemy-lines,TMEH-skin robustly integrates the multi-functionalities of wearing-comfort,physiological signal-response capability for accurate transmission of Morse-code,and thermal management performances under special circumstances,indicating its tremendous potential for smart military-applications.Simulation results show that TMEH-skin has prominent energy-saving efficiency in cities with different climate zones.This study provides a new reference to the booming innovation of natural-derived wearable materials for all-seasonal self-adapting thermal management.展开更多
Gecko-inspired van der Waals force-based adhesion technology demonstrates significant potential for robotic operations.While superior adhesion is achieved under parallel contact during testing,engineering operations o...Gecko-inspired van der Waals force-based adhesion technology demonstrates significant potential for robotic operations.While superior adhesion is achieved under parallel contact during testing,engineering operations often involve non-parallel contact,weakening adhesion,and compromising task stability and efficiency.Stable attachment under such non-parallel contacts remains challenging.Inspired by the soft muscle and rigid bone in the gecko’s sole,this study proposes a self-adaptive core-shell dry adhesive by embedding a thin,rigid piece into a soft,thick elastomer comprising a top adhesion tip with a mushroom-like geometry for interfacial adhesion based on the van der Waals force and a bottom core-shell configuration for interface stress regulation.Unlike traditional core-shell structures with a fixed“dead core,”the proposed“live core”rotates within the soft shell,mimicking skeletal joints.This enables stress equalization at the interface and facilitates adaptive contact to macroscopic interfacial angle errors.This innovative core-shell configuration demonstrates an adhesion strength 100 times higher than conventional homogeneous structures under non-parallel contact and offers anti-overturning ability by mitigating torsional effects.The proposed strategy can advance the development of gecko-inspired adhesion-based devices and systems.展开更多
Typical p-n junctions have emerged as a promising strategy for contending with charge carrier recombination in solar conversion.However,the photo-corrosion and unsuitable energy band positions still hinder their pract...Typical p-n junctions have emerged as a promising strategy for contending with charge carrier recombination in solar conversion.However,the photo-corrosion and unsuitable energy band positions still hinder their practical application for hydrogen production from water in photoelectrochemical systems.Here,an in-situ photo-oxidation method is proposed for achieving self-adapting activation of BiVO_(4)-based photoanodes with surface-encapsulated CuGaS_(2)particles by the ZnO layer.The self-adapting activation demotes the energy band positions of CuGaS_(2),establishing an S-scheme structure with BiVO_(4),resulting in an efficient p-n junction photoanode.The optimal sample exhibits enhanced photocurrent and an onset potential cathodically shifted by~300 mV compared with BiVO_(4),which is attributed to significantly enhanced charge transport and transfer efficiencies.As expected,it attains the highest photocurrent value of 5.87 mA·cm^(-2),aided by a hole scavenger at 1.23 V versus a reversible hydrogen electrode,which significantly surpasses that of BiVO_(4)(4.32 mA·cm^(-2)).展开更多
The intrinsic volume changes(about 300%)of Si anode during the lithiation/delithiation leads to the serious degradation of battery performance despite of theoretical capacity of 3579 mAh g^(-1) of Si.Herein,a three-di...The intrinsic volume changes(about 300%)of Si anode during the lithiation/delithiation leads to the serious degradation of battery performance despite of theoretical capacity of 3579 mAh g^(-1) of Si.Herein,a three-dimensional(3D)conductive polymer binder with adjustable crosslinking density has been designed by employing citric acid(CA)as a crosslinker between the carboxymethyl cellulose(CMC)and the poly(3,4-ethylenedioxythiophene)poly-(styrene-4-sulfonate)(PEDOT:PSS)to stabilize Si anode.By adjusting the crosslinking density,the binder can achieve a balance between rigidity and flexibility to adapt the volume expansion upon lithiation and reversible volume recovery after delithiation of Si.Therefore,Si/CMC-CA-PEDOT:PSS(Si/CCP)electrode demonstrates an excellent performance with high capacities of 2792.3 mAh g^(-1) at 0.5 A g^(-1) and a high area capacity above 2.6 mAh cm^(-2) under Si loading of 1.38 mg cm^(-2).The full cell Si/CCP paired with Li(Ni_(0.8)Co_(0.1)Mn_(0.1))O_(2) cathode discharges a capacity of 199.0 mAh g^(-1) with 84.3%ICE at 0.1 C and the capacity retention of 95.6%after 100 cycles.This work validates the effectiveness of 3D polymer binder and provides new insights to boost the performance of Si anode.展开更多
Most of the carbonate formation are highly heterogeneous with cavities of different sizes, which makes the prediction of cavity-filled reservoir in carbonate rocks difficult. Large cavities in carbonate formations pos...Most of the carbonate formation are highly heterogeneous with cavities of different sizes, which makes the prediction of cavity-filled reservoir in carbonate rocks difficult. Large cavities in carbonate formations pose serious threat to drilling operations. Logging-whiledrilling （LWD） is currently used to accurately identify and evaluate cavities in reservoirs during drilling. In this study, we use the self-adaptive hp-FEM algorithm simulate and calculate the LWD resistivity responses of fracture-cavity reservoir cavities. Compared with the traditional h-FEM method, the self-adaptive hp-FEM algorithm has the characteristics of the self-adaptive mesh refinement and the calculations exponentially converge to highly accurate solutions. Using numerical simulations, we investigated the effect of the cavity size, distance between cavity and borehole, and transmitted frequency on the LWD resistivity response. Based on the results, a method for recognizing cavities is proposed. This research can provide the theoretical basis for the accurate identification and quantitative evaluation of various carbonate reservoirs with cavities encountered in practice.展开更多
Gassmann＇s equations are commonly used for predicting seismic wave velocity in rock physics research.However the input matrix mineral bulk modulus parameters are not accurate,which greatly influences the prediction r...Gassmann＇s equations are commonly used for predicting seismic wave velocity in rock physics research.However the input matrix mineral bulk modulus parameters are not accurate,which greatly influences the prediction reliability.In this paper,combining the Russell fluid factor with the Gassman-Biot-Geertsma equation and introducing the dry-rock Poisson＇s ratio,we propose an effective matrix mineral bulk modulus extraction method.This method can adaptively invert the equivalent matrix mineral bulk modulus to apply the Gassmann equation to fluid substitution of complex carbonate reservoirs and increase the fluid prediction reliability.The verification of the actual material fluid substitution also shows that this method is reliable,efficient,and adaptable.展开更多
Future manufacturing systems need to cope with frequent changes and disturbances, therefore their control architectures require constant adaptability, agility, stability, self-organization, intelligence, and robustnes...Future manufacturing systems need to cope with frequent changes and disturbances, therefore their control architectures require constant adaptability, agility, stability, self-organization, intelligence, and robustness. Bio-inspired manufacturing system can well satisfy these requirements. For this purpose, by referencing the biological organization structure and the mechanism, a bio-inspired manufacturing cell is presented from a novel view, and then a bio-inspired self-adaptive manufacturing model is established based on the ultra-short feedback mechanism of the neuro-endocrine system. A hio-inspired self-adaptive manufacturing system coordinated model is also established based on the neuro-endocrine-immunity system （NEIS）. Finally, an example based on pheromone communication mechanism indicates that the robustness of the whole manufacturing system is improved by bio-inspired technologies.展开更多
Effective guidance is one of the most important tasks to the performance of air-to-air missile. The fuzzy logic controller is able to perform effectively even in situations where the information about the plant is ina...Effective guidance is one of the most important tasks to the performance of air-to-air missile. The fuzzy logic controller is able to perform effectively even in situations where the information about the plant is inaccurate and the operating conditions are uncertain. Based on the proportional navigation, the fuzzy logic and the genetic algorithm are combined to develop an evolutionary fuzzy navigation law with self-adapt region for the air-to-air missile guidance. The line of sight (LOS) rate and the closing speed between the missile and the target are inputs of the fuzzy controller. The output of the fuzzy controller is the commanded acceleration. Then a nonlinear function based on the conventional fuzzy logic control is imported to change the region. This nonlinear function can be changed with the input variables. So the dynamic change of the fuzzy variable region is achieved. The guidance law is optimized by the genetic algorithm. Simulation results of air-to-air missile attack using MATLAB show that the method needs less acceleration and shorter flying time, and its realization is simple.[KH*3/4D]展开更多
On the basis ofa 2D 4-node Mindlin shell element method, a novel self-adapting delamination finite element method is presented, which is developed to model the delamination damage of composite laminates. In the method...On the basis ofa 2D 4-node Mindlin shell element method, a novel self-adapting delamination finite element method is presented, which is developed to model the delamination damage of composite laminates. In the method, the sublaminate elements are generated automatically when the delamination damage occurs or extends. Thus, the complex process and state of delamination damage can be simulated practically with high efficiency for both analysis and modeling. Based on the self-adapting delamination method, linear dynamic finite element damage analysis is performed to simulate the low-velocity impact damage process of three types of mixed woven composite laminates. Taking the frictional force among sublaminations during delaminating and the transverse normal stress into account, the analytical results are consistent with those of the experimental data.展开更多
The element energy projection （EEP） method for computation of super- convergent resulting in a one-dimensional finite element method （FEM） is successfully used to self-adaptive FEM analysis of various linear probl...The element energy projection （EEP） method for computation of super- convergent resulting in a one-dimensional finite element method （FEM） is successfully used to self-adaptive FEM analysis of various linear problems, based on which this paper presents a substantial extension of the whole set of technology to nonlinear problems. The main idea behind the technology transfer from linear analysis to nonlinear analysis is to use Newton＇s method to linearize nonlinear problems into a series of linear problems so that the EEP formulation and the corresponding adaptive strategy can be directly used without the need for specific super-convergence formulation for nonlinear FEM. As a re- sult, a unified and general self-adaptive algorithm for nonlinear FEM analysis is formed. The proposed algorithm is found to be able to produce satisfactory finite element results with accuracy satisfying the user-preset error tolerances by maximum norm anywhere on the mesh. Taking the nonlinear ordinary differential equation （ODE） of second-order as the model problem, this paper describes the related fundamental idea, the imple- mentation strategy, and the computational algorithm. Representative numerical exam- ples are given to show the efficiency, stability, versatility, and reliability of the proposed approach.展开更多
To improve billet quality and the trackability and stability of secondary cooling water during continuous casting, the superheat is introduced into the water distribution for secondary cooling to design the relevant c...To improve billet quality and the trackability and stability of secondary cooling water during continuous casting, the superheat is introduced into the water distribution for secondary cooling to design the relevant control system, based on the water distribution model, superheat and fuzzy self-adaptive PID （process identity） . A spray cooling system is set up for simulation test in laboratory to test the step signal from the conventional, integral sepa rated and fuzzy self-adaptive PID controllers and the simulation casting. And the on-site test is done in some steel plant. The test results show that the fuzzy self-adaptive PID controller＇s performance is better than that of the other two controllers, which provides a basis for further study and application.展开更多
Control parameters of original differential evolution （DE） are kept fixed throughout the entire evolutionary process. However, it is not an easy task to properly set control parameters in DE for different optiinizat...Control parameters of original differential evolution （DE） are kept fixed throughout the entire evolutionary process. However, it is not an easy task to properly set control parameters in DE for different optiinization problems. According to the relative position of two different individual vectors selected to generate a difference vector in the searching place, a self-adapting strategy for the scale factor F of the difference vector is proposed. In terms of the convergence status of the target vector in the current population, a self-adapting crossover probability constant CR strategy is proposed. Therefore, good target vectors have a lower CFI while worse target vectors have a large CFI. At the same time, the mutation operator is modified to improve the convergence speed. The performance of these proposed approaches are studied with the use of some benchmark problems and applied to the trajectory planning of a three-joint redundant manipulator. Finally, the experiment results show that the proposed approaches can greatly improve robustness and convergence speed.展开更多
The control design, based on self-adaptive PID with genetic algorithms(GA) tuning on-line was investigated, for the temperature control of industrial microwave drying rotary device with the multi-layer(IMDRDWM) and wi...The control design, based on self-adaptive PID with genetic algorithms(GA) tuning on-line was investigated, for the temperature control of industrial microwave drying rotary device with the multi-layer(IMDRDWM) and with multivariable nonlinear interaction of microwave and materials. The conventional PID control strategy incorporated with optimization GA was put forward to maintain the optimum drying temperature in order to keep the moisture content below 1%, whose adaptation ability included the cost function of optimization GA according to the output change. Simulations on five different industrial process models and practical temperature process control system for selenium-enriched slag drying intensively by using IMDRDWM were carried out systematically, indicating the reliability and effectiveness of control design. The parameters of proposed control design are all on-line implemented without iterative predictive calculations, and the closed-loop system stability is guaranteed, which makes the developed scheme simpler in its synthesis and application, providing the practical guidelines for the control implementation and the parameter design.展开更多
A self-adaptive-grid method is applied to numerical simulation of the evolu- tion of aircraft wake vortex with the large eddy simulation （LES）. The Idaho Falls （IDF） measurement of run 9 case is simulated numerica...A self-adaptive-grid method is applied to numerical simulation of the evolu- tion of aircraft wake vortex with the large eddy simulation （LES）. The Idaho Falls （IDF） measurement of run 9 case is simulated numerically and compared with that of the field experimental data. The comparison shows that the method is reliable in the complex atmospheric environment with crosswind and ground effect. In addition, six cases with different ambient atmospheric turbulences and Brunt V^iis/il^i （BV） frequencies are com- puted with the LES. The main characteristics of vortex are appropriately simulated by the current method. The onset time of rapid decay and the descending of vortices are in agreement with the previous measurements and the numerical prediction. Also, sec-ondary structures such as baroclinic vorticity and helical structures are also simulated. Only approximately 6 million grid points are needed in computation with the present method, while the number can be as large as 34 million when using a uniform mesh with the same core resolution. The self-adaptive-grid method is proved to be practical in the numerical research of aircraft wake vortex.展开更多
文摘Credit risk is the core issue of supply chain finance. In the supply chain, problems happened in different enterprises can influent the whole to different degrees through transferring, thus statuses of all enterprises and their different influences should be considered when evaluating the supply chain’s credit risk. We examine the characters of supply chain network and complex network, use the local growing complex network to simulate the real supply chain, use cluster analysis to classify the company into several levels;Introducing each level’s self-adaption weight formula according to the company’s quantity and degrees of this level and use the weight to improve the credit evaluation method. The research results indicate that complex network can be used to simulate the supply chain. The credit risk evaluation (CRE) of an enterprise level with bigger note degrees has a greater weight in the supply chain system’s CRE, thus has greater effect on the whole chain. Considering different influences of different enterprise levels can improve credit risk evaluation method’s sensitivity.
基金The project supported by National Natural Science Foundation of China under Grant No. 60074020
文摘Through studying several kinds of chaotic mappings' distributions of orbital points, we analyze the capabilityof the chaotic mutations based on these mappings. Nunerical experiments support our conclusions very well. Thecapability analysis also led to a self-adaptive mechanism of chaotic mutation. The introducing of the self-adaptivechaotic mutation can improve the performance of genetic algorithm very prominently.
基金supported by the Talent Scientific Research Foundation of China Three Gorges University(Grant No.KJ2013B079)
文摘Low-order Duffing and high-order Rossler chaotic oscillator are connected together and new self-adaption frequency detection method is presented. The frequency difference control between unknown signal and the periodic driving force is realized in this paper and the self-adaption is obtained. Thus, the detection precision and speed are promoted. The limitation that there are too many chaotic oscillators in Duffing system is broken. Meanwhile the disadvantage that the detection speed is lower in R ssler chaotic control is overcome. The self-adaption choice of frequency difference control is realized using the Duffing and Rssler different chaotic oscillators to obtain unknown signal frequency. The simulation results show that the presented method is feasible and effective.
基金the financial support from the Strategic Priority Research Program of the Chinese Academy of Sciences (XDB0470303)the National Key Research and Development Program of China (2022YFB4600101)+5 种基金the National Natural Science Foundation of China (52175201)the Research Program of Science and Technology Department of Gansu Province (24JRRA059, 24JRRA044, and 24YFFA014)the Science Fund of Shandong Laboratory of Advanced Materials and Green Manufacturing at Yantai (AMGM2024F12)the Major Program (ZYFZFX-2) of the Lanzhou Institute of Chemical Physics, CASthe Special Research Assistant Project of the Chinese Academy of Sciencesthe Oasis Scholar of Shihezi University
文摘Octopuses,due to their flexible arms,marvelous adaptability,and powerful suckers,are able to effortlessly grasp and disengage various objects in the marine surrounding without causing devastation.However,manipulating delicate objects such as soft and fragile foods underwater require gentle contact and stable adhesion,which poses a serious challenge to now available soft grippers.Inspired by the sucker infundibulum structure and flexible tentacles of octopus,herein we developed a hydraulically actuated hydrogel soft gripper with adaptive maneuverability by coupling multiple hydrogen bond-mediated supramolecular hydrogels and vat polymerization three-dimensional printing,in which hydrogel bionic sucker is composed of a tunable curvature membrane,a negative pressure cavity,and a pneumatic chamber.The design of the sucker structure with the alterable curvature membrane is conducive to realize the reliable and gentle switchable adhesion of the hydrogel soft gripper.As a proof-of-concept,the adaptive hydrogel soft gripper is capable of implement diversified underwater tasks,including gingerly grasping fragile foods like egg yolks and tofu,as well as underwater robots and vehicles that station-keeping and crawling based on switchable adhesion.This study therefore provides a transformative strategy for the design of novel soft grippers that will render promising utilities for underwater exploration soft robotics.
基金supported by the National Natural Science Foundation for Innovative Research Groups of China (Grant No.51021004)the National Natural Science Foundation of China (Grant Nos.50979066,50809045)
文摘In a meandering fiver, a certain scale of turbulent vortex dominates the development of fiver morphology, making the river bend with s particular curvature. This kind of vortex is denoted as ＂bend-forming vortex＂. The coordinated relationship of bend-forming vortex and meandering fiver channel is then known as ＂self-adaption feature＂ of rivers. With these two concepts, this paper investigated the stability and self-adaption character of coherent vortex in the U-shape river bend with a constant curvature. On the basis of fluid mechanics theory and in consideration of turbulent coherent vortex as disturbance, the growth rate and the wave number response range of coherent vortex in meandering rivers with different curvatures were calculated in this paper. Moreover, the responses of different scales of coherent turbulence structure to river bend parameters were analyzed to explain the mechanism of fiver bend maintenance. These methods could provide a theoretical basis for further investigation on fiver meandering.
基金This paper was funded by the Key Program of the National Natural Science Foundation of China(Grant No.U2001201)the Project funded by China Postdoctoral Science Foundation(Grant No.2022M712591)the Fundamental Research Funds for the Central Universities.
文摘Trends toward the globalization of the manufacturing industry and the increasing demands for small-batch,short-cycle,and highly customized products result in complexities and fluctuations in both external and internal manufacturing environments,which poses great challenges to manufacturing enterprises.Fortunately,recent advances in the Industrial Internet of Things(IIoT)and the widespread use of embedded processors and sensors in factories enable collecting real-time manufacturing status data and building cyber–physical systems for smart,flexible,and resilient manufacturing systems.In this context,this paper investigates the mechanisms and methodology of self-organization and self-adaption to tackle exceptions and disturbances in discrete manufacturing processes.Specifically,a general model of smart manufacturing complex networks is constructed using scale-free networks to interconnect heterogeneous manufacturing resources represented by network vertices at multiple levels.Moreover,the capabilities of physical manufacturing resources are encapsulated into virtual manufacturing services using cloud technology,which can be added to or removed from the networks in a plug-and-play manner.Materials,information,and financial assets are passed through interactive links across the networks.Subsequently,analytical target cascading is used to formulate the processes of self-organizing optimal configuration and self-adaptive collaborative control for multilevel key manufacturing resources while particle swarm optimization is used to solve local problems on network vertices.Consequently,an industrial case based on a Chinese engine factory demonstrates the feasibility and efficiency of the proposed model and method in handling typical exceptions.The simulation results show that the proposed mechanism and method outperform the event-triggered rescheduling method,reducing manufacturing cost,manufacturing time,waiting time,and energy consumption,with reasonable computational time.This work potentially enables managers and practitioners to implement active perception,active response,self-organization,and self-adaption solutions in discrete manufacturing enterprises.
基金the Institute of Biomass&Functional Materials of Shaanxi University of Science and Technology for funding this research workfinancially supported by the National Natural Science Foundation of China(2207081675,22278257,22308209)+1 种基金the Key R&D Program of Shaanxi Province(2024SF-YBXM-586)the Project of Innovation Capability Support Program in Shaanxi Province(2024ZC-KJXX-005)。
文摘Global warming and energy crisis are two major challenges in the new-century.Wearable materials that enable all-seasonal self-adapting thermal comfort without additional energy-input attract significant attention as a solution to the increasing severity of extreme climate-change.Inspired by autologous temperature-regulation and multidimensional-sensing origins of nature-skin composed of nature collagen fibers,this study engineered a nanoscale wearable natural fibers-derived thermochromic material(TMEH-skin)for robust all-season self-adapting thermal management by tactically integrating traditional immersion and spraying methods with layer-by-layer stacking-strategy.Because of the on-demand multi-functional layer-structure design,TMEH-skin achieves spontaneous~38.16%visible lightmodulation and~95.1%infrared-emission,demonstrating outstanding double-self-switching thermal management origins by simple color-changing without additional energy-input.Moreover,TMEH-skin has gratifying tensile strength of 13.18 MPa,water vapor permeability,electrical-conductivity,and hydrophobicity,further broadening the application potential and scenarios as wearable materials.In applications for military-missions or reconnaissance behind enemy-lines,TMEH-skin robustly integrates the multi-functionalities of wearing-comfort,physiological signal-response capability for accurate transmission of Morse-code,and thermal management performances under special circumstances,indicating its tremendous potential for smart military-applications.Simulation results show that TMEH-skin has prominent energy-saving efficiency in cities with different climate zones.This study provides a new reference to the booming innovation of natural-derived wearable materials for all-seasonal self-adapting thermal management.
基金supported by the National Natural Science Foundation(52025055,52175546,and 52405624)the Shaanxi University Youth Innovation Team.
文摘Gecko-inspired van der Waals force-based adhesion technology demonstrates significant potential for robotic operations.While superior adhesion is achieved under parallel contact during testing,engineering operations often involve non-parallel contact,weakening adhesion,and compromising task stability and efficiency.Stable attachment under such non-parallel contacts remains challenging.Inspired by the soft muscle and rigid bone in the gecko’s sole,this study proposes a self-adaptive core-shell dry adhesive by embedding a thin,rigid piece into a soft,thick elastomer comprising a top adhesion tip with a mushroom-like geometry for interfacial adhesion based on the van der Waals force and a bottom core-shell configuration for interface stress regulation.Unlike traditional core-shell structures with a fixed“dead core,”the proposed“live core”rotates within the soft shell,mimicking skeletal joints.This enables stress equalization at the interface and facilitates adaptive contact to macroscopic interfacial angle errors.This innovative core-shell configuration demonstrates an adhesion strength 100 times higher than conventional homogeneous structures under non-parallel contact and offers anti-overturning ability by mitigating torsional effects.The proposed strategy can advance the development of gecko-inspired adhesion-based devices and systems.
基金supported by the open fund from Key Lab of Eco-restoration of Regional Contaminated Environment(Shenyang University),Ministry of Education(No.KF-22-08)the National Natural Science Foundation of China(Nos.22003074 and 42177406)+1 种基金the Youth Innovation Promotion Association CAS,Guangdong Basic and Applied Basic Research Foundation(No.2023A1515011410)S.Liu gratefully acknowledges the financial support by the National Natural Science Foundation of China(No.52302223).
文摘Typical p-n junctions have emerged as a promising strategy for contending with charge carrier recombination in solar conversion.However,the photo-corrosion and unsuitable energy band positions still hinder their practical application for hydrogen production from water in photoelectrochemical systems.Here,an in-situ photo-oxidation method is proposed for achieving self-adapting activation of BiVO_(4)-based photoanodes with surface-encapsulated CuGaS_(2)particles by the ZnO layer.The self-adapting activation demotes the energy band positions of CuGaS_(2),establishing an S-scheme structure with BiVO_(4),resulting in an efficient p-n junction photoanode.The optimal sample exhibits enhanced photocurrent and an onset potential cathodically shifted by~300 mV compared with BiVO_(4),which is attributed to significantly enhanced charge transport and transfer efficiencies.As expected,it attains the highest photocurrent value of 5.87 mA·cm^(-2),aided by a hole scavenger at 1.23 V versus a reversible hydrogen electrode,which significantly surpasses that of BiVO_(4)(4.32 mA·cm^(-2)).
基金Financial support by the NSFC no. 52371224, 51972156, and 51872131
文摘The intrinsic volume changes(about 300%)of Si anode during the lithiation/delithiation leads to the serious degradation of battery performance despite of theoretical capacity of 3579 mAh g^(-1) of Si.Herein,a three-dimensional(3D)conductive polymer binder with adjustable crosslinking density has been designed by employing citric acid(CA)as a crosslinker between the carboxymethyl cellulose(CMC)and the poly(3,4-ethylenedioxythiophene)poly-(styrene-4-sulfonate)(PEDOT:PSS)to stabilize Si anode.By adjusting the crosslinking density,the binder can achieve a balance between rigidity and flexibility to adapt the volume expansion upon lithiation and reversible volume recovery after delithiation of Si.Therefore,Si/CMC-CA-PEDOT:PSS(Si/CCP)electrode demonstrates an excellent performance with high capacities of 2792.3 mAh g^(-1) at 0.5 A g^(-1) and a high area capacity above 2.6 mAh cm^(-2) under Si loading of 1.38 mg cm^(-2).The full cell Si/CCP paired with Li(Ni_(0.8)Co_(0.1)Mn_(0.1))O_(2) cathode discharges a capacity of 199.0 mAh g^(-1) with 84.3%ICE at 0.1 C and the capacity retention of 95.6%after 100 cycles.This work validates the effectiveness of 3D polymer binder and provides new insights to boost the performance of Si anode.
基金supported by the National Natural Science Foundation of China(No. 41074099)
文摘Most of the carbonate formation are highly heterogeneous with cavities of different sizes, which makes the prediction of cavity-filled reservoir in carbonate rocks difficult. Large cavities in carbonate formations pose serious threat to drilling operations. Logging-whiledrilling （LWD） is currently used to accurately identify and evaluate cavities in reservoirs during drilling. In this study, we use the self-adaptive hp-FEM algorithm simulate and calculate the LWD resistivity responses of fracture-cavity reservoir cavities. Compared with the traditional h-FEM method, the self-adaptive hp-FEM algorithm has the characteristics of the self-adaptive mesh refinement and the calculations exponentially converge to highly accurate solutions. Using numerical simulations, we investigated the effect of the cavity size, distance between cavity and borehole, and transmitted frequency on the LWD resistivity response. Based on the results, a method for recognizing cavities is proposed. This research can provide the theoretical basis for the accurate identification and quantitative evaluation of various carbonate reservoirs with cavities encountered in practice.
基金sponsored by National Natural Science Foundation of China(Grant No.40904035)
文摘Gassmann＇s equations are commonly used for predicting seismic wave velocity in rock physics research.However the input matrix mineral bulk modulus parameters are not accurate,which greatly influences the prediction reliability.In this paper,combining the Russell fluid factor with the Gassman-Biot-Geertsma equation and introducing the dry-rock Poisson＇s ratio,we propose an effective matrix mineral bulk modulus extraction method.This method can adaptively invert the equivalent matrix mineral bulk modulus to apply the Gassmann equation to fluid substitution of complex carbonate reservoirs and increase the fluid prediction reliability.The verification of the actual material fluid substitution also shows that this method is reliable,efficient,and adaptable.
基金Supported by the National Natural Science Foundation of China (50505017)Fok Ying Tung Edu-cation Foundation (111056)+1 种基金the Innovative and Excellent Foundation for Doctoral Dissertation of Nanjing University of Aeronautics and Astronautics (BCXJ08-07)the New Century Excellent Talents in University,China (NCET-08)~~
文摘Future manufacturing systems need to cope with frequent changes and disturbances, therefore their control architectures require constant adaptability, agility, stability, self-organization, intelligence, and robustness. Bio-inspired manufacturing system can well satisfy these requirements. For this purpose, by referencing the biological organization structure and the mechanism, a bio-inspired manufacturing cell is presented from a novel view, and then a bio-inspired self-adaptive manufacturing model is established based on the ultra-short feedback mechanism of the neuro-endocrine system. A hio-inspired self-adaptive manufacturing system coordinated model is also established based on the neuro-endocrine-immunity system （NEIS）. Finally, an example based on pheromone communication mechanism indicates that the robustness of the whole manufacturing system is improved by bio-inspired technologies.
文摘Effective guidance is one of the most important tasks to the performance of air-to-air missile. The fuzzy logic controller is able to perform effectively even in situations where the information about the plant is inaccurate and the operating conditions are uncertain. Based on the proportional navigation, the fuzzy logic and the genetic algorithm are combined to develop an evolutionary fuzzy navigation law with self-adapt region for the air-to-air missile guidance. The line of sight (LOS) rate and the closing speed between the missile and the target are inputs of the fuzzy controller. The output of the fuzzy controller is the commanded acceleration. Then a nonlinear function based on the conventional fuzzy logic control is imported to change the region. This nonlinear function can be changed with the input variables. So the dynamic change of the fuzzy variable region is achieved. The guidance law is optimized by the genetic algorithm. Simulation results of air-to-air missile attack using MATLAB show that the method needs less acceleration and shorter flying time, and its realization is simple.[KH*3/4D]
基金National Natural Science Foundation of China (50073002)
文摘On the basis ofa 2D 4-node Mindlin shell element method, a novel self-adapting delamination finite element method is presented, which is developed to model the delamination damage of composite laminates. In the method, the sublaminate elements are generated automatically when the delamination damage occurs or extends. Thus, the complex process and state of delamination damage can be simulated practically with high efficiency for both analysis and modeling. Based on the self-adapting delamination method, linear dynamic finite element damage analysis is performed to simulate the low-velocity impact damage process of three types of mixed woven composite laminates. Taking the frictional force among sublaminations during delaminating and the transverse normal stress into account, the analytical results are consistent with those of the experimental data.
基金supported by the National Natural Science Foundation of China(Nos.51378293,51078199,50678093,and 50278046)the Program for Changjiang Scholars and the Innovative Research Team in University of China(No.IRT00736)
文摘The element energy projection （EEP） method for computation of super- convergent resulting in a one-dimensional finite element method （FEM） is successfully used to self-adaptive FEM analysis of various linear problems, based on which this paper presents a substantial extension of the whole set of technology to nonlinear problems. The main idea behind the technology transfer from linear analysis to nonlinear analysis is to use Newton＇s method to linearize nonlinear problems into a series of linear problems so that the EEP formulation and the corresponding adaptive strategy can be directly used without the need for specific super-convergence formulation for nonlinear FEM. As a re- sult, a unified and general self-adaptive algorithm for nonlinear FEM analysis is formed. The proposed algorithm is found to be able to produce satisfactory finite element results with accuracy satisfying the user-preset error tolerances by maximum norm anywhere on the mesh. Taking the nonlinear ordinary differential equation （ODE） of second-order as the model problem, this paper describes the related fundamental idea, the imple- mentation strategy, and the computational algorithm. Representative numerical exam- ples are given to show the efficiency, stability, versatility, and reliability of the proposed approach.
基金Item Sponsored by National High Technology Research and Development Program of China(2007AA04Z194)Major State Basic Research Development Program of China(2007CB613701)+1 种基金National Natural Science Foundation of China(51004032)Fundamental Research Funds for Central Universities of China(NO90409002)
文摘To improve billet quality and the trackability and stability of secondary cooling water during continuous casting, the superheat is introduced into the water distribution for secondary cooling to design the relevant control system, based on the water distribution model, superheat and fuzzy self-adaptive PID （process identity） . A spray cooling system is set up for simulation test in laboratory to test the step signal from the conventional, integral sepa rated and fuzzy self-adaptive PID controllers and the simulation casting. And the on-site test is done in some steel plant. The test results show that the fuzzy self-adaptive PID controller＇s performance is better than that of the other two controllers, which provides a basis for further study and application.
基金This work was supported by the National Natural Science Foundation of China(No.60375001)the High School Doctoral Foundation of China(NO.20030532004).
文摘Control parameters of original differential evolution （DE） are kept fixed throughout the entire evolutionary process. However, it is not an easy task to properly set control parameters in DE for different optiinization problems. According to the relative position of two different individual vectors selected to generate a difference vector in the searching place, a self-adapting strategy for the scale factor F of the difference vector is proposed. In terms of the convergence status of the target vector in the current population, a self-adapting crossover probability constant CR strategy is proposed. Therefore, good target vectors have a lower CFI while worse target vectors have a large CFI. At the same time, the mutation operator is modified to improve the convergence speed. The performance of these proposed approaches are studied with the use of some benchmark problems and applied to the trajectory planning of a three-joint redundant manipulator. Finally, the experiment results show that the proposed approaches can greatly improve robustness and convergence speed.
基金Project(51090385) supported by the Major Program of National Natural Science Foundation of ChinaProject(2011IB001) supported by Yunnan Provincial Science and Technology Program,China+1 种基金Project(2012DFA70570) supported by the International Science & Technology Cooperation Program of ChinaProject(2011IA004) supported by the Yunnan Provincial International Cooperative Program,China
文摘The control design, based on self-adaptive PID with genetic algorithms(GA) tuning on-line was investigated, for the temperature control of industrial microwave drying rotary device with the multi-layer(IMDRDWM) and with multivariable nonlinear interaction of microwave and materials. The conventional PID control strategy incorporated with optimization GA was put forward to maintain the optimum drying temperature in order to keep the moisture content below 1%, whose adaptation ability included the cost function of optimization GA according to the output change. Simulations on five different industrial process models and practical temperature process control system for selenium-enriched slag drying intensively by using IMDRDWM were carried out systematically, indicating the reliability and effectiveness of control design. The parameters of proposed control design are all on-line implemented without iterative predictive calculations, and the closed-loop system stability is guaranteed, which makes the developed scheme simpler in its synthesis and application, providing the practical guidelines for the control implementation and the parameter design.
基金Project supported by the Boeing-COMAC Aviation Energy Conservation and Emissions Reduction Technology Center(AECER)
文摘A self-adaptive-grid method is applied to numerical simulation of the evolu- tion of aircraft wake vortex with the large eddy simulation （LES）. The Idaho Falls （IDF） measurement of run 9 case is simulated numerically and compared with that of the field experimental data. The comparison shows that the method is reliable in the complex atmospheric environment with crosswind and ground effect. In addition, six cases with different ambient atmospheric turbulences and Brunt V^iis/il^i （BV） frequencies are com- puted with the LES. The main characteristics of vortex are appropriately simulated by the current method. The onset time of rapid decay and the descending of vortices are in agreement with the previous measurements and the numerical prediction. Also, sec-ondary structures such as baroclinic vorticity and helical structures are also simulated. Only approximately 6 million grid points are needed in computation with the present method, while the number can be as large as 34 million when using a uniform mesh with the same core resolution. The self-adaptive-grid method is proved to be practical in the numerical research of aircraft wake vortex.
