We propose the Dantzig selector based on the l_(1-q)(1<q≤2)minimization model for the sparse signal recovery.First,we discuss some properties of l_(1-q)minimization model and give some useful inequalities.Then,we ...We propose the Dantzig selector based on the l_(1-q)(1<q≤2)minimization model for the sparse signal recovery.First,we discuss some properties of l_(1-q)minimization model and give some useful inequalities.Then,we give a sufficient condition based on the restricted isometry property for the stable recovery of signals.The l_(1-2)minimization model of Yin-Lou-He is extended to the l_(1-q)minimization model.展开更多
The use of electrochemical-metallization-based volatile threshold switching selectors in cross-point arrays has been widely explored owing to their high on-off ratios and simple structure.However,these devices are uns...The use of electrochemical-metallization-based volatile threshold switching selectors in cross-point arrays has been widely explored owing to their high on-off ratios and simple structure.However,these devices are unsuitable for cross-point architectures because of the difficulty in controlling the random filament formation that results in large fluctuations in the threshold voltage during operation.In this study,we investigated the unidirectional threshold transition characteristics associated with an Ag/GST/HfO_(x)/Pt-based bilayer selector and demonstrated the occurrence of a low leakage current(<1×10^(-11) A) and low distribution of the threshold voltage(Δ0.11 V).The bilayer structure could control the filament formation in the intermediate state through the insertion of an HfO_(x) tunneling barrier.By stacking a bilayer selector with NiO_(x)based resistive random-access memory,the leakage and programming currents of the device could be significantly decreased.For the crossbar array configuration,we performed equivalent circuit analysis of a one-selector oneresistor(1S1R) devices and estimated the optimal array size to demonstrate the applicability of the proposed structure.The maximum acceptable crossbar array size of the 1S1R device with the Ag/GST/HfO_(x)/Pt/Ti/NiO_(x)/Pt structure was 5.29×10^(14)(N^(2),N=2.3×10^(7)).展开更多
Today’s explosion of data urgently requires memory technologies capable of storing large volumes of data in shorter time frames,a feat unattain-able with Flash or DRAM.Intel Optane,commonly referred to as three-dimen...Today’s explosion of data urgently requires memory technologies capable of storing large volumes of data in shorter time frames,a feat unattain-able with Flash or DRAM.Intel Optane,commonly referred to as three-dimensional phase change memory,stands out as one of the most promising candidates.The Optane with cross-point architecture is constructed through layering a storage element and a selector known as the ovonic threshold switch(OTS).The OTS device,which employs chalcogenide film,has thereby gathered increased attention in recent years.In this paper,we begin by providing a brief introduction to the discovery process of the OTS phenomenon.Subsequently,we summarize the key elec-trical parameters of OTS devices and delve into recent explorations of OTS materials,which are categorized as Se-based,Te-based,and S-based material systems.Furthermore,we discuss various models for the OTS switching mechanism,including field-induced nucleation model,as well as several carrier injection models.Additionally,we review the progress and innovations in OTS mechanism research.Finally,we highlight the successful application of OTS devices in three-dimensional high-density memory and offer insights into their promising performance and extensive prospects in emerging applications,such as self-selecting memory and neuromorphic computing.展开更多
To increase efficiency and improve performance, reducing cost and emissions, advanced single crystal Ni-based superalloys are required in aerospace propulsion and power generating gas turbines. With the development of...To increase efficiency and improve performance, reducing cost and emissions, advanced single crystal Ni-based superalloys are required in aerospace propulsion and power generating gas turbines. With the development of alloy, significant improvements in casting techniques have been achieved by introducing the directionally solidified （DS） casting process followed by single crystal （SX） technique. The deviation of preferred orientation of single crystal superalloys is one of the most important defects in casting. In directional solidification equipment with high temperature gradient, single crystal specimens of DZ417G alloy were prepared successfully by the modified Bridgeman method with spiral grain selector. The orientation was investigated by means of X-ray diffraction （XRD） and electron backscattered diffraction （EBSD）.The results show that the crystal selector with a smaller angle can effectively reduce the deviation of preferred orientation.展开更多
It is of great importance to further investigate grain selection mechanism for the production of single crystal(SX) turbine blade because a single crystal with optimized crystal orientation will enhance service perfor...It is of great importance to further investigate grain selection mechanism for the production of single crystal(SX) turbine blade because a single crystal with optimized crystal orientation will enhance service performance of the blade severely.In this paper,single crystals with different deviation angles,i.e.6°,12° and 29°, were obtained using directional solidification under the same casting conditions.It has been found that the grain selection in spiral selector is a coupling process where high order dendrites branch in the front side and primary dendrites disappear in the back side based on the metallographic analysis and electron back scatter diffraction(EBSD).Considering the development of liquid/solid interface by numerical simulation,a combination effect with space expansion,geometrical restriction and grain competition was proposed for spiral grain selection.The space expansion mechanism dominates the process as it provides growth space and driving force for high order dendrites advancing.Thereby,the smaller the take-off angle(θ) is,the larger space and the stronger driving force high order dendrites will get,and the higher efficient the selector will be. The competitive growth between the secondary dendrites plays more contribution than that of primary dendrites,i.e.grain with preferred secondary dendrites instead of preferred primary dendrites could outcompete during grain selection,and this is the reason why spiral grain selector cannot optimize the orientation of the primary dendrites.These findings provide experimental evidence for spatial control of SX growth,and benefit the sophistic casting fields such as turbine blade casting for improved yield.展开更多
The single crystal of nickel-base super alloy is widely used for making turbine blades.The microstructure of the alloy,especially the deviation of preferred orientation of single crystal,possesses the most important e...The single crystal of nickel-base super alloy is widely used for making turbine blades.The microstructure of the alloy,especially the deviation of preferred orientation of single crystal,possesses the most important effects on the mechanical properties of the blades.In this study,the single crystal ingot and blade of DZ417G alloy are prepared by means of the spiral crystal selector as well as the directional solidification method,and the effect of the parameters(i.e.,the shape of samples,the withdrawal rate)and the structure of the spiral crystal selector on the formation of single crystal and the crystal orientation are investigated.This method can prepare not only the single crystal ingot with simple shape but also the single crystal blades with the complex shape,the simple with rod-shape can form the single crystal easily with a relatively fast withdrawal rate,but the blade with complex shape requires much slower withdrawal rate to form single crystal.The length of the crystal selector almost has no effect on the crystal orientation.However,the angle of selector plays an obvious role on the orientation;the selector with a smaller angle can effectively reduce the deviation of preferred orientation;the appropriate angle of selector to obtain optimal orientation is found to be around30°and the deviation of preferred orientation is about30°for this selector.展开更多
The water-soluble carboxymethyl-cyclodextrin polymer (CM-CD polymer) was synthesized and used as capillary electrophoresis chiral selector. Verrapamil and thiopentorusodium were well separated using CM-CD polymer as c...The water-soluble carboxymethyl-cyclodextrin polymer (CM-CD polymer) was synthesized and used as capillary electrophoresis chiral selector. Verrapamil and thiopentorusodium were well separated using CM-CD polymer as chiral selector.展开更多
The modes of grain selection in spiral selector were investigated by both a ProCAST simulation and experimental confirmation.The results show that the efficiency of grain selection in starter block is associated with ...The modes of grain selection in spiral selector were investigated by both a ProCAST simulation and experimental confirmation.The results show that the efficiency of grain selection in starter block is associated with the geometry shape.At the early stage of grain selection,the optimization of grain orientation is dominated by competitive grain growth,but the optimization of grain orientation in starter block is gradually dominated by geometry shape at the later stage of grain selection.Besides,the spiral part could also optimize the orientation of the selected single crystal when the initial angle is large enough,and the single crystal selection in spiral parts with different pitch lengths and initial angles is dominated by different modes.The simulation results agree well with experimental ones.展开更多
The impact of the variations of threshold voltage(V_(th))and hold voltage(V_(hold))of threshold switching(TS)selector in1 S1 R crossbar array is investigated.Based on ON/OFF state I–V curves measurements from a large...The impact of the variations of threshold voltage(V_(th))and hold voltage(V_(hold))of threshold switching(TS)selector in1 S1 R crossbar array is investigated.Based on ON/OFF state I–V curves measurements from a large number of Ag-filament TS selectors,V_(th)and V_(hold)are extracted and their variations distribution expressions are obtained,which are then employed to evaluate the impact on read process and write process in 32×321 S1 R crossbar array under different bias schemes.The results indicate that V_(th)and V_(hold)variations of TS selector can lead to degradation of 1 S1 R array performance parameters,such as minimum read/write voltage,bit error rate(BER),and power consumption.For the read process,a small V_(hold)variation not only results in the minimum read voltage increasing but it also leads to serious degradation of BER.As the standard deviation of V_(hold)and V_(th)increases,the BER and the power consumption of 1 S1 R crossbar array under 1/2 bias,1/3 bias,and floating scheme degrade,and the case under 1/2 bias tends to be more serious compared with other two schemes.For the write process,the minimum write voltage also increases with the variation of V_(hold)from small to large value.A slight increase of V_(th)standard deviation not only decreases write power efficiency markedly but also increases write power consumption.These results have reference significance to understand the voltage variation impacts and design of selector properly.展开更多
Erythromycin as a new chiral selector was first used for chrial separation of four derivatives of biphenyldimethylester enantiomers on CE. The influence of pH, the chiral selector concentration and organic modifiers ...Erythromycin as a new chiral selector was first used for chrial separation of four derivatives of biphenyldimethylester enantiomers on CE. The influence of pH, the chiral selector concentration and organic modifiers were preliminarily studied. Experiments show that the erythromycin as chiral selector is useful to CE.展开更多
A cationic cyclodextrin derivative 6-O-（hydroxypropyltrimethylammonia）-β-cyclodextrin （GTA-β-CD） with low degree of substitution was prepared through a convenient method in solid phase. The product could be used...A cationic cyclodextrin derivative 6-O-（hydroxypropyltrimethylammonia）-β-cyclodextrin （GTA-β-CD） with low degree of substitution was prepared through a convenient method in solid phase. The product could be used as a valuable chiral selector in the capillary electrophoresis （CE） separation of some acidic drug enantiomers such as naproxen, ofloxacin, ibuprofen and warfarin.展开更多
Selector devices are indispensable components of large-scale memristor array systems.The thereinto,ovonic threshold switching(OTS)selector is one of the most suitable candidates for selector devices,owing to its high ...Selector devices are indispensable components of large-scale memristor array systems.The thereinto,ovonic threshold switching(OTS)selector is one of the most suitable candidates for selector devices,owing to its high selectivity and scalability.However,OTS selectors suffer from poor endurance and stability which are persistent tricky problems for applica-tion.Here,we report on a multilayer OTS selector based on simple GeSe and doped-GeSe.The experimental results show im-proving selector performed extraordinary endurance up to 1010 and the fluctuation of threshold voltage is 2.5%.The reason for the improvement may lie in more interface states which strengthen the interaction among individual layers.These develop-ments pave the way towards tuning a new class of OTS materials engineering,ensuring improvement of electrical perform-ance.展开更多
Enantioseparation of salbutamol solute was carried out in liquid-supported membrane by using a polyvinylidene fluoride hollow-fiber module. The enantioselective transport of solute was facilitated by combinatorial chi...Enantioseparation of salbutamol solute was carried out in liquid-supported membrane by using a polyvinylidene fluoride hollow-fiber module. The enantioselective transport of solute was facilitated by combinatorial chiral selectors, which were dissolved in toluene organic solvent. The effects of molar concentration ratios of salbutamol to combinatorial chiral selectors, and the pH value of buffer solution on enantioseparation were investigated. The results show that when the molar concentration ratio is 2∶1∶1, the maximum separation factor and enantiomer excess are 1.49 and 19.74%, respectively, and the R-enantiomer flux is more than S-enantiomer; the pH value of buffer solution influences the performances of enantioseparartion obviously, and the appropriate range of pH value is 7.07.2.展开更多
We propose and demonstrate an integrated microwave photonic sideband selector based on the thin-film lithium niobate(TFLN)platform by integrating an electro-optic Mach-Zehnder modulator(MZM)and a thermo-optic tunable ...We propose and demonstrate an integrated microwave photonic sideband selector based on the thin-film lithium niobate(TFLN)platform by integrating an electro-optic Mach-Zehnder modulator(MZM)and a thermo-optic tunable flat-top microring filter.The sideband selector has two functions:electro-optic modulation of wideband RF signal and sideband selection.The microwave photonic sideband selector supports processing RF signals up to 40 GHz,with undesired sidebands effectively suppressed by more than 25 d B.The demonstrated device shows great potential for TFLN integrated technology in microwave photonic applications,such as mixing and frequency measurement.展开更多
基金supported by the National Natural Science Foundation of China“Variable exponential function spaces on variable anisotropic Euclidean spaces and their applications”(12261083),“Harmonic analysis on affine symmetric spaces”(12161083).
文摘We propose the Dantzig selector based on the l_(1-q)(1<q≤2)minimization model for the sparse signal recovery.First,we discuss some properties of l_(1-q)minimization model and give some useful inequalities.Then,we give a sufficient condition based on the restricted isometry property for the stable recovery of signals.The l_(1-2)minimization model of Yin-Lou-He is extended to the l_(1-q)minimization model.
基金financially supported by the National Research Foundation of Korea (NRF)(No.2016R1A3B1908249)。
文摘The use of electrochemical-metallization-based volatile threshold switching selectors in cross-point arrays has been widely explored owing to their high on-off ratios and simple structure.However,these devices are unsuitable for cross-point architectures because of the difficulty in controlling the random filament formation that results in large fluctuations in the threshold voltage during operation.In this study,we investigated the unidirectional threshold transition characteristics associated with an Ag/GST/HfO_(x)/Pt-based bilayer selector and demonstrated the occurrence of a low leakage current(<1×10^(-11) A) and low distribution of the threshold voltage(Δ0.11 V).The bilayer structure could control the filament formation in the intermediate state through the insertion of an HfO_(x) tunneling barrier.By stacking a bilayer selector with NiO_(x)based resistive random-access memory,the leakage and programming currents of the device could be significantly decreased.For the crossbar array configuration,we performed equivalent circuit analysis of a one-selector oneresistor(1S1R) devices and estimated the optimal array size to demonstrate the applicability of the proposed structure.The maximum acceptable crossbar array size of the 1S1R device with the Ag/GST/HfO_(x)/Pt/Ti/NiO_(x)/Pt structure was 5.29×10^(14)(N^(2),N=2.3×10^(7)).
基金M.Zhu acknowledges support by the National Outstanding Youth Program(62322411)the Hundred Talents Program(Chinese Academy of Sciences)+1 种基金the Shanghai Rising-Star Program(21QA1410800)The financial support was provided by the Strategic Priority Research Program of the Chinese Academy of Sciences(XDB44010200).
文摘Today’s explosion of data urgently requires memory technologies capable of storing large volumes of data in shorter time frames,a feat unattain-able with Flash or DRAM.Intel Optane,commonly referred to as three-dimensional phase change memory,stands out as one of the most promising candidates.The Optane with cross-point architecture is constructed through layering a storage element and a selector known as the ovonic threshold switch(OTS).The OTS device,which employs chalcogenide film,has thereby gathered increased attention in recent years.In this paper,we begin by providing a brief introduction to the discovery process of the OTS phenomenon.Subsequently,we summarize the key elec-trical parameters of OTS devices and delve into recent explorations of OTS materials,which are categorized as Se-based,Te-based,and S-based material systems.Furthermore,we discuss various models for the OTS switching mechanism,including field-induced nucleation model,as well as several carrier injection models.Additionally,we review the progress and innovations in OTS mechanism research.Finally,we highlight the successful application of OTS devices in three-dimensional high-density memory and offer insights into their promising performance and extensive prospects in emerging applications,such as self-selecting memory and neuromorphic computing.
基金Project (51074105) supported by the National Natural Science Foundation of ChinaProjects (08DZ1130100, 10520706400) supported by the Science and Technology Commission of Shanghai Municipality, ChinaProject (2007CB613606) supported by the National Basic Research Program of China
文摘To increase efficiency and improve performance, reducing cost and emissions, advanced single crystal Ni-based superalloys are required in aerospace propulsion and power generating gas turbines. With the development of alloy, significant improvements in casting techniques have been achieved by introducing the directionally solidified （DS） casting process followed by single crystal （SX） technique. The deviation of preferred orientation of single crystal superalloys is one of the most important defects in casting. In directional solidification equipment with high temperature gradient, single crystal specimens of DZ417G alloy were prepared successfully by the modified Bridgeman method with spiral grain selector. The orientation was investigated by means of X-ray diffraction （XRD） and electron backscattered diffraction （EBSD）.The results show that the crystal selector with a smaller angle can effectively reduce the deviation of preferred orientation.
基金financially sponsored by National Science and Technology Major Project (No. 2017-VII-0008-0102)National Natural Science Foundation of China (Nos. 91860121 and 52073174)。
文摘It is of great importance to further investigate grain selection mechanism for the production of single crystal(SX) turbine blade because a single crystal with optimized crystal orientation will enhance service performance of the blade severely.In this paper,single crystals with different deviation angles,i.e.6°,12° and 29°, were obtained using directional solidification under the same casting conditions.It has been found that the grain selection in spiral selector is a coupling process where high order dendrites branch in the front side and primary dendrites disappear in the back side based on the metallographic analysis and electron back scatter diffraction(EBSD).Considering the development of liquid/solid interface by numerical simulation,a combination effect with space expansion,geometrical restriction and grain competition was proposed for spiral grain selection.The space expansion mechanism dominates the process as it provides growth space and driving force for high order dendrites advancing.Thereby,the smaller the take-off angle(θ) is,the larger space and the stronger driving force high order dendrites will get,and the higher efficient the selector will be. The competitive growth between the secondary dendrites plays more contribution than that of primary dendrites,i.e.grain with preferred secondary dendrites instead of preferred primary dendrites could outcompete during grain selection,and this is the reason why spiral grain selector cannot optimize the orientation of the primary dendrites.These findings provide experimental evidence for spatial control of SX growth,and benefit the sophistic casting fields such as turbine blade casting for improved yield.
基金Project(51074105)supported by the National Natural Science Foundation of ChinaProjects(08DZ1130100,10520706400)supported by the Science and Technology Commission of Shanghai Municipality,ChinaProject(2007CB613606)supported by the National Basic Research Program of China
文摘The single crystal of nickel-base super alloy is widely used for making turbine blades.The microstructure of the alloy,especially the deviation of preferred orientation of single crystal,possesses the most important effects on the mechanical properties of the blades.In this study,the single crystal ingot and blade of DZ417G alloy are prepared by means of the spiral crystal selector as well as the directional solidification method,and the effect of the parameters(i.e.,the shape of samples,the withdrawal rate)and the structure of the spiral crystal selector on the formation of single crystal and the crystal orientation are investigated.This method can prepare not only the single crystal ingot with simple shape but also the single crystal blades with the complex shape,the simple with rod-shape can form the single crystal easily with a relatively fast withdrawal rate,but the blade with complex shape requires much slower withdrawal rate to form single crystal.The length of the crystal selector almost has no effect on the crystal orientation.However,the angle of selector plays an obvious role on the orientation;the selector with a smaller angle can effectively reduce the deviation of preferred orientation;the appropriate angle of selector to obtain optimal orientation is found to be around30°and the deviation of preferred orientation is about30°for this selector.
文摘The water-soluble carboxymethyl-cyclodextrin polymer (CM-CD polymer) was synthesized and used as capillary electrophoresis chiral selector. Verrapamil and thiopentorusodium were well separated using CM-CD polymer as chiral selector.
基金supported by the National Basic Research Program(973 Program) of China under Grant No.2010CB631200(2010CB631206)the National Natural Science Foundation of China(NSFC) under Grant No.50801061,No.50931004,No.51071165the fund of the State Key Laboratory of Solidification Processing in NWPU under Grant No.SKLSP201112
文摘The modes of grain selection in spiral selector were investigated by both a ProCAST simulation and experimental confirmation.The results show that the efficiency of grain selection in starter block is associated with the geometry shape.At the early stage of grain selection,the optimization of grain orientation is dominated by competitive grain growth,but the optimization of grain orientation in starter block is gradually dominated by geometry shape at the later stage of grain selection.Besides,the spiral part could also optimize the orientation of the selected single crystal when the initial angle is large enough,and the single crystal selection in spiral parts with different pitch lengths and initial angles is dominated by different modes.The simulation results agree well with experimental ones.
基金Project supported by the MOST of China(Grant No.2016YFA0201801)the Beijing Advanced Innovation Center for Future Chip(ICFC)+2 种基金Beijing Municipal Science and Technology Project(Grant No.D161100001716002)the National Natural Science Foundation of China(Grant Nos.61674089,61674087,61674092,61076115,and 61774012)the Research Fund from Beijing Innovation Center for Future Chip(Grant No.KYJJ2016008)
文摘The impact of the variations of threshold voltage(V_(th))and hold voltage(V_(hold))of threshold switching(TS)selector in1 S1 R crossbar array is investigated.Based on ON/OFF state I–V curves measurements from a large number of Ag-filament TS selectors,V_(th)and V_(hold)are extracted and their variations distribution expressions are obtained,which are then employed to evaluate the impact on read process and write process in 32×321 S1 R crossbar array under different bias schemes.The results indicate that V_(th)and V_(hold)variations of TS selector can lead to degradation of 1 S1 R array performance parameters,such as minimum read/write voltage,bit error rate(BER),and power consumption.For the read process,a small V_(hold)variation not only results in the minimum read voltage increasing but it also leads to serious degradation of BER.As the standard deviation of V_(hold)and V_(th)increases,the BER and the power consumption of 1 S1 R crossbar array under 1/2 bias,1/3 bias,and floating scheme degrade,and the case under 1/2 bias tends to be more serious compared with other two schemes.For the write process,the minimum write voltage also increases with the variation of V_(hold)from small to large value.A slight increase of V_(th)standard deviation not only decreases write power efficiency markedly but also increases write power consumption.These results have reference significance to understand the voltage variation impacts and design of selector properly.
文摘Erythromycin as a new chiral selector was first used for chrial separation of four derivatives of biphenyldimethylester enantiomers on CE. The influence of pH, the chiral selector concentration and organic modifiers were preliminarily studied. Experiments show that the erythromycin as chiral selector is useful to CE.
文摘A cationic cyclodextrin derivative 6-O-（hydroxypropyltrimethylammonia）-β-cyclodextrin （GTA-β-CD） with low degree of substitution was prepared through a convenient method in solid phase. The product could be used as a valuable chiral selector in the capillary electrophoresis （CE） separation of some acidic drug enantiomers such as naproxen, ofloxacin, ibuprofen and warfarin.
基金supported by National Natural Science Foundation of China(Grant Nos.61974164,62074166,61804181,62004219,and 6200422).
文摘Selector devices are indispensable components of large-scale memristor array systems.The thereinto,ovonic threshold switching(OTS)selector is one of the most suitable candidates for selector devices,owing to its high selectivity and scalability.However,OTS selectors suffer from poor endurance and stability which are persistent tricky problems for applica-tion.Here,we report on a multilayer OTS selector based on simple GeSe and doped-GeSe.The experimental results show im-proving selector performed extraordinary endurance up to 1010 and the fluctuation of threshold voltage is 2.5%.The reason for the improvement may lie in more interface states which strengthen the interaction among individual layers.These develop-ments pave the way towards tuning a new class of OTS materials engineering,ensuring improvement of electrical perform-ance.
文摘Enantioseparation of salbutamol solute was carried out in liquid-supported membrane by using a polyvinylidene fluoride hollow-fiber module. The enantioselective transport of solute was facilitated by combinatorial chiral selectors, which were dissolved in toluene organic solvent. The effects of molar concentration ratios of salbutamol to combinatorial chiral selectors, and the pH value of buffer solution on enantioseparation were investigated. The results show that when the molar concentration ratio is 2∶1∶1, the maximum separation factor and enantiomer excess are 1.49 and 19.74%, respectively, and the R-enantiomer flux is more than S-enantiomer; the pH value of buffer solution influences the performances of enantioseparartion obviously, and the appropriate range of pH value is 7.07.2.
基金supported by the National Key Research and Development Program of China(No.2021YFB2800104)the National Natural Science Foundation of China(Nos.62175079 and 62205119)。
文摘We propose and demonstrate an integrated microwave photonic sideband selector based on the thin-film lithium niobate(TFLN)platform by integrating an electro-optic Mach-Zehnder modulator(MZM)and a thermo-optic tunable flat-top microring filter.The sideband selector has two functions:electro-optic modulation of wideband RF signal and sideband selection.The microwave photonic sideband selector supports processing RF signals up to 40 GHz,with undesired sidebands effectively suppressed by more than 25 d B.The demonstrated device shows great potential for TFLN integrated technology in microwave photonic applications,such as mixing and frequency measurement.
