To enhance the properties of bio-based polyesters,enabling them to more closely mimic the characteristics of terephthalate-based materials,a series of aliphatic-aromatic copolyesters(P_(1)–P_(4))were synthesized via ...To enhance the properties of bio-based polyesters,enabling them to more closely mimic the characteristics of terephthalate-based materials,a series of aliphatic-aromatic copolyesters(P_(1)–P_(4))were synthesized via melt polycondensation.Diester monomers M and N were synthesized via the Williamson reaction,using lignin-derived 2-methoxyhydroquinone,methyl 4-chloromethylbenzoate,and methyl chloroacetate as starting materials.Hydroquinone bis(2-hydroxyethyl)ether(HQEE)and 1,4-cyclohexanedimethanol(CHDM)were employed as cyclic segments,while 1,4-butanediol(BDO)and 1,6-hexanediol(HDO)served as alkyl segments within the copolymer structures.The novel copolyesters exhibited molecular weights(Mw)in the range of 5.25×10^(4)–5.87×10^(4) g/mol,with polydispersity indices spanning from 2.50–2.66.Evaluation of the structural and thermomechanical properties indicated that the inclusion of alkyl segments induced a reduction in both crystallinity and molecular weight,while significantly improving the flexibility,whereas cyclic segments enhanced the processability of the copolyesters.Copolyesters P_(1) and P_(2),due to the presence of rigid segments(HQEE and CHDM),displayed relatively high glass transition temperatures(Tg>80℃)and melting temperatures(Tm>170℃).Notably,P_(2),incorporating CHDM,exhibited superior elongation properties(272%),attributed to the enhanced chain mobility resulting from its trans-conformation,while P_(1) was found to be likely brittle owing to excessive chain stiffness.Biodegradability assessment using earthworms as bioindicators revealed that the copolyesters demonstrated moderate degradation profiles,with P_(2) exhibiting a degradation rate of 4.82%,followed by P_(4) at 4.07%,P_(3) at 3.65%,and P_(1) at 3.17%.The higher degradation rate of P_(2) was attributed to its relatively larger d-spacing and lower toxicity,which facilitated enzymatic hydrolytic attack by microorganisms.These findings highlight the significance of optimizing the structural chain segments within aliphatic-aromatic copolyesters.By doing so,it is possible to significantly enhance their properties and performance,offering viable bio-based alternatives to petroleum-based polyesters such as polyethylene terephthalate(PET).展开更多
Water hammer diagnostics is an important fracturing diagnosis technique to evaluate fracture locations and other downhole events in fracturing. The evaluation results are obtained by analyzing shut-in water hammer pre...Water hammer diagnostics is an important fracturing diagnosis technique to evaluate fracture locations and other downhole events in fracturing. The evaluation results are obtained by analyzing shut-in water hammer pressure signal. The field-sampled water hammer signal is often disturbed by noise interference. Noise interference exists in various pumping stages during water hammer diagnostics, with significantly different frequency range and energy distribution. Clarifying the differences in frequency range and energy distribution between effective water hammer signals and noise is the basis of setting specific filtering parameters, including filtering frequency range and energy thresholds. Filtering specifically could separate the effective signal and noise, which is the key to ensuring the accuracy of water hammer diagnosis. As an emerging technique, there is a lack of research on the frequency range and energy distribution of effective signals in water hammer diagnostics. In this paper, the frequency range and energy distribution characteristics of field-sampled water hammer signals were clarified quantitatively and qualitatively for the first time by a newly proposed comprehensive water hammer segmentation-energy analysis method. The water hammer signals were preprocessed and divided into three segments, including pre-shut-in, water hammer oscillation, and leak-off segment. Then, the three segments were analyzed by energy analysis and correlation analysis. The results indicated that, one aspect, the frequency range of water hammer oscillation spans from 0 to 0.65 Hz, considered as effective water hammer signal. The pre-shut-in and leak-off segment ranges from 0 to 0.35 Hz and 0-0.2 Hz respectively. Meanwhile, odd harmonics were manifested in water hammer oscillation segment, with the harmonic frequencies ranging approximately from 0.07 to 0.75 Hz. Whereas integer harmonics were observed in pre-shut-in segment, ranging from 6 to 40 Hz. The other aspect, the energy distribution of water hammer signals was analyzed in different frequency ranges. In 0-1 Hz, an exponential decay was observed in all three segments. In 1-100 Hz, a periodical energy distribution was observed in pre-shut-in segment, an exponential decay was observed in water hammer oscillation, and an even energy distribution was observed in leak-off segment. In 100-500 Hz, an even energy distribution was observed in those three segments, yet the highest magnitude was noted in leak-off segment. In this study, the effective frequency range and energy distribution characteristics of the field-sampled water hammer signals in different segments were sufficiently elucidated quantitatively and qualitatively for the first time, laying the groundwork for optimizing the filtering parameters of the field filtering models and advancing the accuracy of identifying downhole event locations.展开更多
Severe acute respiratory syndrome coronavirus 2(SARS-CoV-2),the pathogen responsible for coronavirus disease 2019(COVID-19),continues to evolve,giving rise to more variants and global reinfections.Previous research ha...Severe acute respiratory syndrome coronavirus 2(SARS-CoV-2),the pathogen responsible for coronavirus disease 2019(COVID-19),continues to evolve,giving rise to more variants and global reinfections.Previous research has demonstrated that barcode segments can effectively and cost-efficiently identify specific species within closely related populations.In this study,we designed and tested RNA barcode segments based on genetic evolutionary relationships to facilitate the efficient and accurate identification of SARS-CoV-2 from extensive virus samples,including human coronaviruses(HCoVs)and SARSr-CoV-2 lineages.Nucleotide sequences sourced from NCBI and GISAID were meticulously selected and curated to construct training sets,encompassing 1733 complete genome sequences of HCoVs and SARSr-CoV-2 lineages.Through genetic-level species testing,we validated the accuracy and reliability of the barcode segments for identifying SARS-CoV-2.Subsequently,75 main and subordinate species-specific barcode segments for SARS-CoV-2,located in ORF1ab,S,E,ORF7a,and N coding sequences,were intercepted and screened based on single-nucleotide polymorphism sites and weighted scores.Post-testing,these segments exhibited high recall rates(nearly 100%),specificity(almost 30%at the nucleotide level),and precision(100%)performance on identification.They were eventually visualized using one and two-dimensional combined barcodes and deposited in an online database(http://virusbarcodedatabase.top/).The successful integration of barcoding technology in SARS-CoV-2 identification provides valuable insights for future studies involving complete genome sequence polymorphism analysis.Moreover,this cost-effective and efficient identification approach also provides valuable reference for future research endeavors related to virus surveillance.展开更多
Tmnsmembrane（TM） protein plays an important role in the life activity of the cells, and the prediction of transmembrane helical segments （TMHs） is an important subject in the bioinformatics research. Thus far, sev...Tmnsmembrane（TM） protein plays an important role in the life activity of the cells, and the prediction of transmembrane helical segments （TMHs） is an important subject in the bioinformatics research. Thus far, several prediction methods have been reported, but there are some deficiencies in prediction accuracy and adaptability in these methods. In this paper, a method based on discrete wavelet transform （DWT） was developed to predict the TMHs. Two sets of test data sets containing total 60 protein sequences were utilized to access the effect of the method. Compared with the prediction results of TMHMM2.0 and MEMSAT, the obtained results indicate that the presented method has high prediction accuracy.展开更多
In this study, we examined the thermal effects throughout the process of the placement of span-scale girder segments on a 6×110-m continuous steel box girder in the Hong Kong-Zhuhai-Macao Bridge. Firstly, when a ...In this study, we examined the thermal effects throughout the process of the placement of span-scale girder segments on a 6×110-m continuous steel box girder in the Hong Kong-Zhuhai-Macao Bridge. Firstly, when a span-scale girder segment is temporarily stored in the open air, temperature gradients will significantly increase the maximum reaction force on temporary supports and cause local buckling at the bottom of the girder segment. Secondly, due to the temperature difference of the girder segments before and after girth-welding, some residual thermal deflections will appear on the girder segments because the boundary conditions of the structure are changed by the girth-welding. Thirdly, the thermal expansion and thermal bending of girder segments will cause movement and rotation of bearings, which must be considered in setting bearings. We propose control measures for these problems based on finite element method simulation with field-measured temperatures. The local buckling during open-air storage can be avoided by reasonably determining the appropriate positions of temporary supports using analysis of overall and local stresses. The residual thermal deflections can be overcome by performing girth-welding during a period when the vertical temperature difference of the girder is within 1 °C, such as after 22:00. Some formulas are proposed to determine the pre-set distances for bearings, in which the movement and rotation of the bearings due to dead loads and thermal loads are considered. Finally, the feasibility of these control measures in the placement of span-scale girder segments on a real continuous girder was verified: no local buckling was observed during open-air storage;the residual thermal deflections after girth-welding were controlled within 5 mm and the residual pre-set distances of bearings when the whole continuous girder reached its design state were controlled within 20 mm.展开更多
Two series of polyurethanes based on mixed polychloromethyl methyl siloxane and poly-tetramethylene oxide in different weight fractions were synthesized. The phase separation ofsamples was studied using DSC and dynami...Two series of polyurethanes based on mixed polychloromethyl methyl siloxane and poly-tetramethylene oxide in different weight fractions were synthesized. The phase separation ofsamples was studied using DSC and dynamic mechanical property analysis. The results showedthat the introduction of chloromethyl group into polysiloxane increased its polarity and henceimproved the miscibilities with polytetramethylene oxide and polyurethane hard segment.Particularly, in the case of N-methyldiethanolamine extended materials, the surface and tensileproperties of these samples can be adjusted by various ratios of two soft segments.展开更多
As a part of a serial work about the annealing inducing improvement of fracture toughness of polypropylene （PP） articles, in this work, a highly efficient mobilizer was introduced into PP and the injection-molded sa...As a part of a serial work about the annealing inducing improvement of fracture toughness of polypropylene （PP） articles, in this work, a highly efficient mobilizer was introduced into PP and the injection-molded samples were annealed at different temperatures. The mobility of chain segments of PP was investigated by measuring the glass transition temperature. Differential scanning calorimetry （DSC） and wide angle X-ray diffraction （WAXD） were used to characterize the variation of crystalline structure of PP during the annealing process. The fracture behaviors including notched Izod impact fracture and universal tensile fracture were investigated to detect the mechanical properties in response to the variations of both chain segments mobility and crystalline structures. It was found that the mobilizer greatly improved the chain segments mobility. Further results showed that the mobilizer also induced apparent changes of the glass transition temperature and the degree of crystallinity of PP during the annealing process. Consequently, the annealed PP samples containing a few amount of mobilizer exhibited largely increased fracture toughness.展开更多
AIM: To investigate the efficacy of Ferrara rings (FR) implantation in the treatment of keratoconus.METHODS: It was a retrospective case series descriptive study. The sample was comprised of 50 patients 79 eyes diagno...AIM: To investigate the efficacy of Ferrara rings (FR) implantation in the treatment of keratoconus.METHODS: It was a retrospective case series descriptive study. The sample was comprised of 50 patients 79 eyes diagnosed with progressive keratoconus. This included 24 (48%) males and 26 (52%) females between the age of 13 and 44 years. All participants underwent surgical implantation of FR in the period between January 2009 and September 2010 at Jordan University Hospital. Thorough ophthalmologic examinations were applied to measure vital variables for each pathological condition before and after surgery. RESULTS: Findings indicated an overall significant postoperative improvement in both uncorrected visual acuity (UCVA) and best spectacle corrected visual acuity (BSCVA) throughout follow up visits. Moreover, results illustrated a significant decrease in spherical equivalent (SE) and keratometric readings (lower, higher and the average). CONCLUSION: Surgical intervention strategies are being frequently developed to meet the needs of patients with keratoconus. The implantation of Ferrara rings has proven to be a safe and feasible alternative procedure for the treatment of mild-moderate keratoconus especially for patients with contact lenses intolerance. We have found that this procedure has improved visual outcomes in all eyes studied. Nevertheless, further research is needed to investigate long term outcomes.展开更多
AIM:To evaluate the clinical outcomes after Ferrara intrastromal corneal ring segments(ICRS)reoperation in patients with keratoconus.METHODS:A total of 37 keratoconus eyes implanted with intrastromal corneal ring segm...AIM:To evaluate the clinical outcomes after Ferrara intrastromal corneal ring segments(ICRS)reoperation in patients with keratoconus.METHODS:A total of 37 keratoconus eyes implanted with intrastromal corneal ring segments,which had an ICRS exchange,addition,reposition or removal were evaluated.Uncorrected visual acuity(UCVA),best corrected visual acuity(BCVA),keratometry(K),asphericity(Q)and pachymetry at the thinnest point(PTP)of the cornea were evaluated using a corneal tomography(Oculus Pentacam,USA)RESULTS:The mean follow-up time after the reoperation was 30.5±9.7 months.The mean UCVA improved from 20/300 to 20/80(P=0.005);the mean BCVA improved from 20/160 to 20/50(P=0.0002),the mean keratometry reduced from 49.33±4.19D to 46.16±3.90D(P=0.0001),the mean pachymetry at the thinnest point increased from 450±42.9μm to 469±40.8μm(P=0.0001).The asphericity increased from-0.84±0.74 to-0.35±0.81(P=0.15)and the spherical equivalent reduced from-4.64±4.87D to-3.04±3.45D(P=0.137).The changes in the asphericity and spherical equivalent were not statistically significant.CONCLUSION:Ferrara ICRS implantation showed to be a reversible and readjustable surgical procedure for keratoconus treatment.Good outcomes can be obtained even after removal,addition,reposition or exchange of ICRS.展开更多
BACKGROUND Liver resection and radiofrequency ablation are considered curative options for hepatocellular carcinoma.The choice between these techniques is still controversial especially in cases of hepatocellular carc...BACKGROUND Liver resection and radiofrequency ablation are considered curative options for hepatocellular carcinoma.The choice between these techniques is still controversial especially in cases of hepatocellular carcinoma affecting posterosuperior segments in elderly patients.AIM To compare post-operative outcomes between liver resection and radiofrequency ablation in elderly with single hepatocellular carcinoma located in posterosuperior segments.METHODS A retrospective multicentric study was performed enrolling 77 patients age≥70-years-old with single hepatocellular carcinoma(≤30 mm),located in posterosuperior segments(4a,7,8).Patients were divided into liver resection and radiofrequency ablation groups and preoperative,peri-operative and long-term outcomes were retrospectively analyzed and compared using a 1:1 propensity score matching.RESULTS After propensity score matching,twenty-six patients were included in each group.Operative time and overall postoperative complications were higher in the resection group compared to the ablation group(165 min vs 20 min,P<0.01;54%vs 19%P=0.02 respectively).A median hospital stay was significantly longer in the resection group than in the ablation group(7.5 d vs 3 d,P<0.01).Ninety-day mortality was comparable between the two groups.There were no significant differences between resection and ablation group in terms of overall survival and disease free survival at 1,3,and 5 years.CONCLUSION Radiofrequency ablation in posterosuperior segments in elderly is safe and feasible and ensures a short hospital stay,better quality of life and does not modify the overall and disease-free survival.展开更多
Hydrangea bretschneideri Dipp is a highly popular ornamental plant for garden decoration.Genetic engineering technology has been successfully used in many plant species,but it is limited in Hydrangea.Here we establish...Hydrangea bretschneideri Dipp is a highly popular ornamental plant for garden decoration.Genetic engineering technology has been successfully used in many plant species,but it is limited in Hydrangea.Here we established an efficient regeneration system by using stem segments as explants for the first time.In our study,the plant growth regulators(PGRs)were evaluated at the different regeneration processes,including axillary shoots regeneration and root induction.We found that the optimal concentration for axillary buds’induction was 2.0 mgL^(-1)6-BA and 0.5 mgL^(-1)1 IAA,its highest induction rate was 70%.Moreover,the highest axillary shoots proliferation coefficient was 10.7 on the Murashige and Skoog(MS)medium with 2.0 mgL^(-1)6-benzyladenine(BA),0.2 mgL^(-1)indole-3-butyric acid(IBA),and 1.0 mgL^(-1)gibberellin A3(GA3).The highest frequency of root induction was 80.0±0.06%by culturing the elongated shoots in 1/2 MS medium containing 0.1 mgL^(-1)IBA.In summary,our study will provide an effective technology for large-scale propagation and important pathway for promoting the popularization and application of Hydrangea bretschneideri Dipp.展开更多
[Objective] The aim was to study the conditions of tissue culture regeneration seedling by using the stem segments of Euphorbia tirucalli and determine the optimum culture condition of each culture stage,so as to prov...[Objective] The aim was to study the conditions of tissue culture regeneration seedling by using the stem segments of Euphorbia tirucalli and determine the optimum culture condition of each culture stage,so as to provide references for the factory production and relative study of tissue culture seedling of E. tirucalli. [Method] Taking the stem segments of E. tirucalli as explants,the effects of various mediums on germination rate,multiplication coefficient and rooting rate were studied. [Result] The optimum induction medium of germination culture was 1/2MS＋NAA 0.02 mg/L＋6-BA 1.0 mg/L,with differentiation rate of 89.7%; the best subculture medium was 1/2MS＋NAA 0.02 mg/L＋6-BA 0.60 mg/L＋AD 3.0 mg/L,with multiplication coefficient of 5.70; the optimum rooting culture medium was 1/2MS＋NAA 0.40 mg/L＋IBA 0.4 mg/L,with rooting rate of 100% and transplanting survival rate of 80%. [Conclusion] The tissue culture conditions of stem segments of E. tirucalli were determined primarily.展开更多
By computing and classifying the data of gully offset obtained from field surveys along the Tianjingshan fault zone and estimating the ages of three types of gullies,the strike-slip rates along the fault zone are disc...By computing and classifying the data of gully offset obtained from field surveys along the Tianjingshan fault zone and estimating the ages of three types of gullies,the strike-slip rates along the fault zone are discussed in different time intervals and fault segments.The results suggest that the intensity of activity along the fault zone is not strong,but the differences between different time intervals and fault segments since the late Pleistocene have been obvious.The average rates range from 0.23 mm/a to 1.62 mm/a.The largest average rate is 1.40 mm/a,which occurred in the early and middle of late Pleistocene along the western segment of the fault zone.Since the late stage of the late Pleistocene,the center of faulting activity of the fault zone has shifted to the middle segment,and the average slip rates range have changed from 1.30 mm/a to 1.63 mm/a.展开更多
We investigate global temperature data produced by the Climate Research Unit at the University of East Anglia (CRU) and the Berkeley Earth Surface Temperature consortium (BEST). We first fit the 1850-2010 data with po...We investigate global temperature data produced by the Climate Research Unit at the University of East Anglia (CRU) and the Berkeley Earth Surface Temperature consortium (BEST). We first fit the 1850-2010 data with polynomials of degrees 1 to 9. A significant ~60-yr oscillation is accounted for as soon as degree 4 is reached. This oscillation is even better modeled as a broken line, more precisely a series of ~30-yr long linear segments, with slope breaks (singularities) in ~1904, ~1940, and ~1974 (±3 yr), and a possible recent occurrence at the turn of the 20th century. Oceanic indices PDO (Pacific Decadal Oscillation) and AMO (Atlantic Multidecadal Oscillation) have undergone major changes (respectively of sign and slope) roughly at the same times as the temperature slope breaks. This can be interpreted with a system of oceanic non-linear coupled oscillators with abrupt mode shifts. Thus, the Earth’s climate may have entered a new mode (a new ~30-yr episode) near the turn of the 20th century: no further temperature increase, a dominantly negative PDO index and a decreasing AMO index might be expected for the next decade or two.展开更多
Based on the vector diffraction theory, the effect of complex phase filters on intensity distribution of a radially polarized multi Gaussian beam in the focal region of high NA lens is theoretically investigated. It i...Based on the vector diffraction theory, the effect of complex phase filters on intensity distribution of a radially polarized multi Gaussian beam in the focal region of high NA lens is theoretically investigated. It is observed that a properly designed multi belt complex phase filter can generate subwavelength novel focal patterns including splitting of focal spots and generation of multiple focal spot segments such as eight, six and four focal spots along the optical axis are obtained. We expect that such an investigation is useful for optical manipulation and material processing, multiple high refractive index particle trapping technologies.展开更多
An appropriate optimal number of market segments(ONS)estimation is essential for an enterprise to achieve successful market segmentation,but at present,there is a serious lack of attention to this issue in market segm...An appropriate optimal number of market segments(ONS)estimation is essential for an enterprise to achieve successful market segmentation,but at present,there is a serious lack of attention to this issue in market segmentation.In our study,an independent adaptive ONS estimation method BWCON-NSDK-means++is proposed by integrating a newinternal validity index(IVI)Between-Within-Connectivity(BWCON)and a newstable clustering algorithmNatural-SDK-means++(NSDK-means++)in a novel way.First,to complete the evaluation dimensions of the existing IVIs,we designed a connectivity formula based on the neighbor relationship and proposed the BWCON by integrating the connectivity with other two commonly considered measures of compactness and separation.Then,considering the stability,number of parameters and clustering performance,we proposed the NSDK-means++to participate in the integrationwhere the natural neighbor was used to optimize the initial cluster centers(ICCs)determination strategy in the SDK-means++.At last,to ensure the objectivity of the estimatedONS,we designed a BWCON-based ONS estimation framework that does not require the user to set any parameters in advance and integrated the NSDK-means++into this framework forming a practical ONS estimation tool BWCON-NSDK-means++.The final experimental results showthat the proposed BWCONand NSDK-means++are significantlymore suitable than their respective existing models to participate in the integration for determining theONS,and the proposed BWCON-NSDK-means++is demonstrably superior to the BWCON-KMA,BWCONMBK,BWCON-KM++,BWCON-RKM++,BWCON-SDKM++,BWCON-Single linkage,BWCON-Complete linkage,BWCON-Average linkage and BWCON-Ward linkage in terms of the ONS estimation.Moreover,as an independentmarket segmentation tool,the BWCON-NSDK-means++also outperforms the existing models with respect to the inter-market differentiation and sub-market size.展开更多
Depending on the excitability of the medium, a propagating wave segment will either contract or expand to fill the medium with spiral waves. This paper aims to introduce a simple mechanism of feedback control to stabi...Depending on the excitability of the medium, a propagating wave segment will either contract or expand to fill the medium with spiral waves. This paper aims to introduce a simple mechanism of feedback control to stabilize such an expansion or contraction. To do this, we lay out a feedback control system in a block diagram and reduce it into a bare, universal formula. Analytical and experimental findings are compared through a series of numerical simulations of the Barkley model.展开更多
neural network model based on backbone propagation was applied to Learn-ing and predicting the interaction between antiparallelly interactive peptide seg-ments in proteins.Hydrophobic properties pf residues were found...neural network model based on backbone propagation was applied to Learn-ing and predicting the interaction between antiparallelly interactive peptide seg-ments in proteins.Hydrophobic properties pf residues were found dominant in in-terpeptides.Weights of each kind of residues, obtained by this work,suggestedsome different scales for the hydrophobicity of the residue.These will be helpful in understanding polypeptide structure and protein folding.展开更多
基金financially supported by State Administration of Foreign Experts Affairs(SAFEA)through the High-End Foreign Expert Program(No.BG2021227001)postdoctoral funding from Wuhan University of Science and Technology(No.105008701)。
文摘To enhance the properties of bio-based polyesters,enabling them to more closely mimic the characteristics of terephthalate-based materials,a series of aliphatic-aromatic copolyesters(P_(1)–P_(4))were synthesized via melt polycondensation.Diester monomers M and N were synthesized via the Williamson reaction,using lignin-derived 2-methoxyhydroquinone,methyl 4-chloromethylbenzoate,and methyl chloroacetate as starting materials.Hydroquinone bis(2-hydroxyethyl)ether(HQEE)and 1,4-cyclohexanedimethanol(CHDM)were employed as cyclic segments,while 1,4-butanediol(BDO)and 1,6-hexanediol(HDO)served as alkyl segments within the copolymer structures.The novel copolyesters exhibited molecular weights(Mw)in the range of 5.25×10^(4)–5.87×10^(4) g/mol,with polydispersity indices spanning from 2.50–2.66.Evaluation of the structural and thermomechanical properties indicated that the inclusion of alkyl segments induced a reduction in both crystallinity and molecular weight,while significantly improving the flexibility,whereas cyclic segments enhanced the processability of the copolyesters.Copolyesters P_(1) and P_(2),due to the presence of rigid segments(HQEE and CHDM),displayed relatively high glass transition temperatures(Tg>80℃)and melting temperatures(Tm>170℃).Notably,P_(2),incorporating CHDM,exhibited superior elongation properties(272%),attributed to the enhanced chain mobility resulting from its trans-conformation,while P_(1) was found to be likely brittle owing to excessive chain stiffness.Biodegradability assessment using earthworms as bioindicators revealed that the copolyesters demonstrated moderate degradation profiles,with P_(2) exhibiting a degradation rate of 4.82%,followed by P_(4) at 4.07%,P_(3) at 3.65%,and P_(1) at 3.17%.The higher degradation rate of P_(2) was attributed to its relatively larger d-spacing and lower toxicity,which facilitated enzymatic hydrolytic attack by microorganisms.These findings highlight the significance of optimizing the structural chain segments within aliphatic-aromatic copolyesters.By doing so,it is possible to significantly enhance their properties and performance,offering viable bio-based alternatives to petroleum-based polyesters such as polyethylene terephthalate(PET).
基金support from the National Natural Science Foundation of China(No.52374019).
文摘Water hammer diagnostics is an important fracturing diagnosis technique to evaluate fracture locations and other downhole events in fracturing. The evaluation results are obtained by analyzing shut-in water hammer pressure signal. The field-sampled water hammer signal is often disturbed by noise interference. Noise interference exists in various pumping stages during water hammer diagnostics, with significantly different frequency range and energy distribution. Clarifying the differences in frequency range and energy distribution between effective water hammer signals and noise is the basis of setting specific filtering parameters, including filtering frequency range and energy thresholds. Filtering specifically could separate the effective signal and noise, which is the key to ensuring the accuracy of water hammer diagnosis. As an emerging technique, there is a lack of research on the frequency range and energy distribution of effective signals in water hammer diagnostics. In this paper, the frequency range and energy distribution characteristics of field-sampled water hammer signals were clarified quantitatively and qualitatively for the first time by a newly proposed comprehensive water hammer segmentation-energy analysis method. The water hammer signals were preprocessed and divided into three segments, including pre-shut-in, water hammer oscillation, and leak-off segment. Then, the three segments were analyzed by energy analysis and correlation analysis. The results indicated that, one aspect, the frequency range of water hammer oscillation spans from 0 to 0.65 Hz, considered as effective water hammer signal. The pre-shut-in and leak-off segment ranges from 0 to 0.35 Hz and 0-0.2 Hz respectively. Meanwhile, odd harmonics were manifested in water hammer oscillation segment, with the harmonic frequencies ranging approximately from 0.07 to 0.75 Hz. Whereas integer harmonics were observed in pre-shut-in segment, ranging from 6 to 40 Hz. The other aspect, the energy distribution of water hammer signals was analyzed in different frequency ranges. In 0-1 Hz, an exponential decay was observed in all three segments. In 1-100 Hz, a periodical energy distribution was observed in pre-shut-in segment, an exponential decay was observed in water hammer oscillation, and an even energy distribution was observed in leak-off segment. In 100-500 Hz, an even energy distribution was observed in those three segments, yet the highest magnitude was noted in leak-off segment. In this study, the effective frequency range and energy distribution characteristics of the field-sampled water hammer signals in different segments were sufficiently elucidated quantitatively and qualitatively for the first time, laying the groundwork for optimizing the filtering parameters of the field filtering models and advancing the accuracy of identifying downhole event locations.
基金supported by grants from Key Research&Development Project of Nanhua Biomedical Co.,Ltd.(No.H202191490139)National Natural Science Foundation of China(No.31872866)+1 种基金China Postdoctoral Science Foundation(Nos.2021M701160 and 2022M721101)Funds of Hunan university(521119400156).
文摘Severe acute respiratory syndrome coronavirus 2(SARS-CoV-2),the pathogen responsible for coronavirus disease 2019(COVID-19),continues to evolve,giving rise to more variants and global reinfections.Previous research has demonstrated that barcode segments can effectively and cost-efficiently identify specific species within closely related populations.In this study,we designed and tested RNA barcode segments based on genetic evolutionary relationships to facilitate the efficient and accurate identification of SARS-CoV-2 from extensive virus samples,including human coronaviruses(HCoVs)and SARSr-CoV-2 lineages.Nucleotide sequences sourced from NCBI and GISAID were meticulously selected and curated to construct training sets,encompassing 1733 complete genome sequences of HCoVs and SARSr-CoV-2 lineages.Through genetic-level species testing,we validated the accuracy and reliability of the barcode segments for identifying SARS-CoV-2.Subsequently,75 main and subordinate species-specific barcode segments for SARS-CoV-2,located in ORF1ab,S,E,ORF7a,and N coding sequences,were intercepted and screened based on single-nucleotide polymorphism sites and weighted scores.Post-testing,these segments exhibited high recall rates(nearly 100%),specificity(almost 30%at the nucleotide level),and precision(100%)performance on identification.They were eventually visualized using one and two-dimensional combined barcodes and deposited in an online database(http://virusbarcodedatabase.top/).The successful integration of barcoding technology in SARS-CoV-2 identification provides valuable insights for future studies involving complete genome sequence polymorphism analysis.Moreover,this cost-effective and efficient identification approach also provides valuable reference for future research endeavors related to virus surveillance.
基金Project supported by National High-Technology Research andDevelopment Program of China (Grant No .2002AA234021)
文摘Tmnsmembrane（TM） protein plays an important role in the life activity of the cells, and the prediction of transmembrane helical segments （TMHs） is an important subject in the bioinformatics research. Thus far, several prediction methods have been reported, but there are some deficiencies in prediction accuracy and adaptability in these methods. In this paper, a method based on discrete wavelet transform （DWT） was developed to predict the TMHs. Two sets of test data sets containing total 60 protein sequences were utilized to access the effect of the method. Compared with the prediction results of TMHMM2.0 and MEMSAT, the obtained results indicate that the presented method has high prediction accuracy.
基金Project supported by the National Natural Science Foundation of China(Nos.51578496 and 51878603)the Zhejiang Provincial Natural Science Foundation of China(No.LZ16E080001)。
文摘In this study, we examined the thermal effects throughout the process of the placement of span-scale girder segments on a 6×110-m continuous steel box girder in the Hong Kong-Zhuhai-Macao Bridge. Firstly, when a span-scale girder segment is temporarily stored in the open air, temperature gradients will significantly increase the maximum reaction force on temporary supports and cause local buckling at the bottom of the girder segment. Secondly, due to the temperature difference of the girder segments before and after girth-welding, some residual thermal deflections will appear on the girder segments because the boundary conditions of the structure are changed by the girth-welding. Thirdly, the thermal expansion and thermal bending of girder segments will cause movement and rotation of bearings, which must be considered in setting bearings. We propose control measures for these problems based on finite element method simulation with field-measured temperatures. The local buckling during open-air storage can be avoided by reasonably determining the appropriate positions of temporary supports using analysis of overall and local stresses. The residual thermal deflections can be overcome by performing girth-welding during a period when the vertical temperature difference of the girder is within 1 °C, such as after 22:00. Some formulas are proposed to determine the pre-set distances for bearings, in which the movement and rotation of the bearings due to dead loads and thermal loads are considered. Finally, the feasibility of these control measures in the placement of span-scale girder segments on a real continuous girder was verified: no local buckling was observed during open-air storage;the residual thermal deflections after girth-welding were controlled within 5 mm and the residual pre-set distances of bearings when the whole continuous girder reached its design state were controlled within 20 mm.
文摘Two series of polyurethanes based on mixed polychloromethyl methyl siloxane and poly-tetramethylene oxide in different weight fractions were synthesized. The phase separation ofsamples was studied using DSC and dynamic mechanical property analysis. The results showedthat the introduction of chloromethyl group into polysiloxane increased its polarity and henceimproved the miscibilities with polytetramethylene oxide and polyurethane hard segment.Particularly, in the case of N-methyldiethanolamine extended materials, the surface and tensileproperties of these samples can be adjusted by various ratios of two soft segments.
基金financially supported by the National Natural Science Foundation of China (Nos. 51173151, 50973090)Program for New Century Excellent Talents in Universities (NCET-08-0823)+1 种基金Distinguished Young Scholars Foundation of Sichuan (2012JQ0057)the Fundamental Research Funds for the Central Universities (SWJTU11CX142,SWJTU11ZT10)
文摘As a part of a serial work about the annealing inducing improvement of fracture toughness of polypropylene （PP） articles, in this work, a highly efficient mobilizer was introduced into PP and the injection-molded samples were annealed at different temperatures. The mobility of chain segments of PP was investigated by measuring the glass transition temperature. Differential scanning calorimetry （DSC） and wide angle X-ray diffraction （WAXD） were used to characterize the variation of crystalline structure of PP during the annealing process. The fracture behaviors including notched Izod impact fracture and universal tensile fracture were investigated to detect the mechanical properties in response to the variations of both chain segments mobility and crystalline structures. It was found that the mobilizer greatly improved the chain segments mobility. Further results showed that the mobilizer also induced apparent changes of the glass transition temperature and the degree of crystallinity of PP during the annealing process. Consequently, the annealed PP samples containing a few amount of mobilizer exhibited largely increased fracture toughness.
文摘AIM: To investigate the efficacy of Ferrara rings (FR) implantation in the treatment of keratoconus.METHODS: It was a retrospective case series descriptive study. The sample was comprised of 50 patients 79 eyes diagnosed with progressive keratoconus. This included 24 (48%) males and 26 (52%) females between the age of 13 and 44 years. All participants underwent surgical implantation of FR in the period between January 2009 and September 2010 at Jordan University Hospital. Thorough ophthalmologic examinations were applied to measure vital variables for each pathological condition before and after surgery. RESULTS: Findings indicated an overall significant postoperative improvement in both uncorrected visual acuity (UCVA) and best spectacle corrected visual acuity (BSCVA) throughout follow up visits. Moreover, results illustrated a significant decrease in spherical equivalent (SE) and keratometric readings (lower, higher and the average). CONCLUSION: Surgical intervention strategies are being frequently developed to meet the needs of patients with keratoconus. The implantation of Ferrara rings has proven to be a safe and feasible alternative procedure for the treatment of mild-moderate keratoconus especially for patients with contact lenses intolerance. We have found that this procedure has improved visual outcomes in all eyes studied. Nevertheless, further research is needed to investigate long term outcomes.
文摘AIM:To evaluate the clinical outcomes after Ferrara intrastromal corneal ring segments(ICRS)reoperation in patients with keratoconus.METHODS:A total of 37 keratoconus eyes implanted with intrastromal corneal ring segments,which had an ICRS exchange,addition,reposition or removal were evaluated.Uncorrected visual acuity(UCVA),best corrected visual acuity(BCVA),keratometry(K),asphericity(Q)and pachymetry at the thinnest point(PTP)of the cornea were evaluated using a corneal tomography(Oculus Pentacam,USA)RESULTS:The mean follow-up time after the reoperation was 30.5±9.7 months.The mean UCVA improved from 20/300 to 20/80(P=0.005);the mean BCVA improved from 20/160 to 20/50(P=0.0002),the mean keratometry reduced from 49.33±4.19D to 46.16±3.90D(P=0.0001),the mean pachymetry at the thinnest point increased from 450±42.9μm to 469±40.8μm(P=0.0001).The asphericity increased from-0.84±0.74 to-0.35±0.81(P=0.15)and the spherical equivalent reduced from-4.64±4.87D to-3.04±3.45D(P=0.137).The changes in the asphericity and spherical equivalent were not statistically significant.CONCLUSION:Ferrara ICRS implantation showed to be a reversible and readjustable surgical procedure for keratoconus treatment.Good outcomes can be obtained even after removal,addition,reposition or exchange of ICRS.
文摘BACKGROUND Liver resection and radiofrequency ablation are considered curative options for hepatocellular carcinoma.The choice between these techniques is still controversial especially in cases of hepatocellular carcinoma affecting posterosuperior segments in elderly patients.AIM To compare post-operative outcomes between liver resection and radiofrequency ablation in elderly with single hepatocellular carcinoma located in posterosuperior segments.METHODS A retrospective multicentric study was performed enrolling 77 patients age≥70-years-old with single hepatocellular carcinoma(≤30 mm),located in posterosuperior segments(4a,7,8).Patients were divided into liver resection and radiofrequency ablation groups and preoperative,peri-operative and long-term outcomes were retrospectively analyzed and compared using a 1:1 propensity score matching.RESULTS After propensity score matching,twenty-six patients were included in each group.Operative time and overall postoperative complications were higher in the resection group compared to the ablation group(165 min vs 20 min,P<0.01;54%vs 19%P=0.02 respectively).A median hospital stay was significantly longer in the resection group than in the ablation group(7.5 d vs 3 d,P<0.01).Ninety-day mortality was comparable between the two groups.There were no significant differences between resection and ablation group in terms of overall survival and disease free survival at 1,3,and 5 years.CONCLUSION Radiofrequency ablation in posterosuperior segments in elderly is safe and feasible and ensures a short hospital stay,better quality of life and does not modify the overall and disease-free survival.
基金This work is supported by the Grassland Talent Project:The Innovation Team of New Varieties Breeding at the Economic and Ecological Shrub,and the Evaluation of the Economic and Ecological Shrub Resources and New Variety Breeding in Inner Mongolia(No.201702077)。
文摘Hydrangea bretschneideri Dipp is a highly popular ornamental plant for garden decoration.Genetic engineering technology has been successfully used in many plant species,but it is limited in Hydrangea.Here we established an efficient regeneration system by using stem segments as explants for the first time.In our study,the plant growth regulators(PGRs)were evaluated at the different regeneration processes,including axillary shoots regeneration and root induction.We found that the optimal concentration for axillary buds’induction was 2.0 mgL^(-1)6-BA and 0.5 mgL^(-1)1 IAA,its highest induction rate was 70%.Moreover,the highest axillary shoots proliferation coefficient was 10.7 on the Murashige and Skoog(MS)medium with 2.0 mgL^(-1)6-benzyladenine(BA),0.2 mgL^(-1)indole-3-butyric acid(IBA),and 1.0 mgL^(-1)gibberellin A3(GA3).The highest frequency of root induction was 80.0±0.06%by culturing the elongated shoots in 1/2 MS medium containing 0.1 mgL^(-1)IBA.In summary,our study will provide an effective technology for large-scale propagation and important pathway for promoting the popularization and application of Hydrangea bretschneideri Dipp.
基金Supported by Key Technologies R &D Program of Guangdong Province (2009B0203030092006B20201007)~~
文摘[Objective] The aim was to study the conditions of tissue culture regeneration seedling by using the stem segments of Euphorbia tirucalli and determine the optimum culture condition of each culture stage,so as to provide references for the factory production and relative study of tissue culture seedling of E. tirucalli. [Method] Taking the stem segments of E. tirucalli as explants,the effects of various mediums on germination rate,multiplication coefficient and rooting rate were studied. [Result] The optimum induction medium of germination culture was 1/2MS＋NAA 0.02 mg/L＋6-BA 1.0 mg/L,with differentiation rate of 89.7%; the best subculture medium was 1/2MS＋NAA 0.02 mg/L＋6-BA 0.60 mg/L＋AD 3.0 mg/L,with multiplication coefficient of 5.70; the optimum rooting culture medium was 1/2MS＋NAA 0.40 mg/L＋IBA 0.4 mg/L,with rooting rate of 100% and transplanting survival rate of 80%. [Conclusion] The tissue culture conditions of stem segments of E. tirucalli were determined primarily.
基金This project was sponsored by the State Seismological Bureau (85-02-3-3), China
文摘By computing and classifying the data of gully offset obtained from field surveys along the Tianjingshan fault zone and estimating the ages of three types of gullies,the strike-slip rates along the fault zone are discussed in different time intervals and fault segments.The results suggest that the intensity of activity along the fault zone is not strong,but the differences between different time intervals and fault segments since the late Pleistocene have been obvious.The average rates range from 0.23 mm/a to 1.62 mm/a.The largest average rate is 1.40 mm/a,which occurred in the early and middle of late Pleistocene along the western segment of the fault zone.Since the late stage of the late Pleistocene,the center of faulting activity of the fault zone has shifted to the middle segment,and the average slip rates range have changed from 1.30 mm/a to 1.63 mm/a.
基金financial support from IPGP as part of the IEPT RAS-IPGP cooperation.IPGP Contribution NS 3391.
文摘We investigate global temperature data produced by the Climate Research Unit at the University of East Anglia (CRU) and the Berkeley Earth Surface Temperature consortium (BEST). We first fit the 1850-2010 data with polynomials of degrees 1 to 9. A significant ~60-yr oscillation is accounted for as soon as degree 4 is reached. This oscillation is even better modeled as a broken line, more precisely a series of ~30-yr long linear segments, with slope breaks (singularities) in ~1904, ~1940, and ~1974 (±3 yr), and a possible recent occurrence at the turn of the 20th century. Oceanic indices PDO (Pacific Decadal Oscillation) and AMO (Atlantic Multidecadal Oscillation) have undergone major changes (respectively of sign and slope) roughly at the same times as the temperature slope breaks. This can be interpreted with a system of oceanic non-linear coupled oscillators with abrupt mode shifts. Thus, the Earth’s climate may have entered a new mode (a new ~30-yr episode) near the turn of the 20th century: no further temperature increase, a dominantly negative PDO index and a decreasing AMO index might be expected for the next decade or two.
文摘Based on the vector diffraction theory, the effect of complex phase filters on intensity distribution of a radially polarized multi Gaussian beam in the focal region of high NA lens is theoretically investigated. It is observed that a properly designed multi belt complex phase filter can generate subwavelength novel focal patterns including splitting of focal spots and generation of multiple focal spot segments such as eight, six and four focal spots along the optical axis are obtained. We expect that such an investigation is useful for optical manipulation and material processing, multiple high refractive index particle trapping technologies.
基金supported by the earmarked fund for CARS-29 and the open funds of the Key Laboratory of Viticulture and Enology,Ministry of Agriculture,China.
文摘An appropriate optimal number of market segments(ONS)estimation is essential for an enterprise to achieve successful market segmentation,but at present,there is a serious lack of attention to this issue in market segmentation.In our study,an independent adaptive ONS estimation method BWCON-NSDK-means++is proposed by integrating a newinternal validity index(IVI)Between-Within-Connectivity(BWCON)and a newstable clustering algorithmNatural-SDK-means++(NSDK-means++)in a novel way.First,to complete the evaluation dimensions of the existing IVIs,we designed a connectivity formula based on the neighbor relationship and proposed the BWCON by integrating the connectivity with other two commonly considered measures of compactness and separation.Then,considering the stability,number of parameters and clustering performance,we proposed the NSDK-means++to participate in the integrationwhere the natural neighbor was used to optimize the initial cluster centers(ICCs)determination strategy in the SDK-means++.At last,to ensure the objectivity of the estimatedONS,we designed a BWCON-based ONS estimation framework that does not require the user to set any parameters in advance and integrated the NSDK-means++into this framework forming a practical ONS estimation tool BWCON-NSDK-means++.The final experimental results showthat the proposed BWCONand NSDK-means++are significantlymore suitable than their respective existing models to participate in the integration for determining theONS,and the proposed BWCON-NSDK-means++is demonstrably superior to the BWCON-KMA,BWCONMBK,BWCON-KM++,BWCON-RKM++,BWCON-SDKM++,BWCON-Single linkage,BWCON-Complete linkage,BWCON-Average linkage and BWCON-Ward linkage in terms of the ONS estimation.Moreover,as an independentmarket segmentation tool,the BWCON-NSDK-means++also outperforms the existing models with respect to the inter-market differentiation and sub-market size.
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 11105074 and 11005026)the Natural Science Foundation of the Higher Education Institutions of Jiangsu Province, China (Grant Nos. 11KJB140004 and 11KJA110001)the Qing Lan Project of Jiangsu Province, China
文摘Depending on the excitability of the medium, a propagating wave segment will either contract or expand to fill the medium with spiral waves. This paper aims to introduce a simple mechanism of feedback control to stabilize such an expansion or contraction. To do this, we lay out a feedback control system in a block diagram and reduce it into a bare, universal formula. Analytical and experimental findings are compared through a series of numerical simulations of the Barkley model.
文摘neural network model based on backbone propagation was applied to Learn-ing and predicting the interaction between antiparallelly interactive peptide seg-ments in proteins.Hydrophobic properties pf residues were found dominant in in-terpeptides.Weights of each kind of residues, obtained by this work,suggestedsome different scales for the hydrophobicity of the residue.These will be helpful in understanding polypeptide structure and protein folding.
