The segment erector is a key part of the shield machines for tunnel engineering. The available segment erectors are all of serial configuration which is suffering from the problems of low rigidity and accumulative mot...The segment erector is a key part of the shield machines for tunnel engineering. The available segment erectors are all of serial configuration which is suffering from the problems of low rigidity and accumulative motion errors. The current research mainly focuses on improving assembly accuracy and control performance of serial segment erectors. An innovative design method is proposed featuring motion group-decoupling, based on which a new type of segment erector is developed and investigated. Firstly, the segment installation manipulation is analyzed and decomposed into three motion groups that are decoupled. Then the type synthesis for the 4-DOF motion group is performed based on the general function（GF） set theory and a new configuration of （1T？1R？1PS3UPS） is attained according to the segment manipulation requirements. Consequently, the kinematic models are built and the reducibility and accuracy are analyzed. The dexterity is verified though numerical simulation and no singular points appear in the workspace. Finally, a positioning experiment is carried out by using the prototype developed in the lab that demonstrates a 13.1% improvement of positioning accuracy and the feasibility of the new segment erector. The presented group-decoupling design method is able to invent new type of hybrid segment erectors that avoid the accumulative motion error of erecting.展开更多
The segmented mirror telescope is widely used.The aberrations of segmented mirror systems are different from single mirror systems.This paper uses the Fourier optics theory to analyse the Zernike aberrations of segmen...The segmented mirror telescope is widely used.The aberrations of segmented mirror systems are different from single mirror systems.This paper uses the Fourier optics theory to analyse the Zernike aberrations of segmented mirror systems.It concludes that the Zernike aberrations of segmented mirror systems obey the linearity theorem.The design of a segmented space telescope and segmented schemes are discussed,and its optical model is constructed. The computer simulation experiment is performed with this optical model to verify the suppositions. The experimental results confirm the correctness of the model.展开更多
This paper discusses the basic principle and design m ethod for light distribution of car lamp, introduces an important development: h igh efficient and flexible car lamp with reflecting light distribution-segmente d ...This paper discusses the basic principle and design m ethod for light distribution of car lamp, introduces an important development: h igh efficient and flexible car lamp with reflecting light distribution-segmente d reflector (multi-patch) car lamp, and puts out a design method for segmented reflector based on error analysis. Unlike classical car lamp with refractive lig ht distribution, the method of reflecting light distribution gives car lamp desi gn more flexibility. In the case of guarantying the lightness of car lamp and sa tisfying the standard demand for the light distribution, the design of the exter ior of the car lamp has more freedom. The high gradient of car lamp is more suit able for the demand of streamline of the car exterior. The shape of segmented re flector obtained by theory calculating of car lamp reflecting light distribution is only an ideal shape, which usually has considerable differences with the fin al shape and will influences light distribution. There exist difference between the calculated reflector and manufactured reflector. Owing to light reflecting c haracter, the small diversification of the reflector will reduce the big diver sification of the light distribution shape on light distribution screen in 25 -meter place, so light distribution quality can’t be ensured. To ensure the re flector by light distribution calculation accordance to reflector by practical m anufacture, the error effect of surface shape must be reasonably considered name ly the error effect of manufacture tache. The paper establishes error-analyzing model for segmented reflector according to the analysis of error of making proc ess for segmented reflector. Based on this error-analyzing model and by use of the analyzing software developed for segmented reflector light distribution, it could reasonably consider reflector errors made by manufacturing, such as reflec tor surface spray-painting and plating aluminum, which could give out shapes of reflector patches for segmented reflector well and truly, and direct the plan o f making process efficiently. The method put by the paper has successfully appli ed to develop segmented reflector lamp for several type cars and obtained good e ffect for the factory.展开更多
Continuous phase plate（CPP）,which has a function of beam shaping in laser systems,is one kind of important diffractive optics.Based on the Fourier transform of the Gerchberg-Saxton（G-S） algorithm for designing CPP...Continuous phase plate（CPP）,which has a function of beam shaping in laser systems,is one kind of important diffractive optics.Based on the Fourier transform of the Gerchberg-Saxton（G-S） algorithm for designing CPP,we proposed an optical diffraction method according to the real system conditions.A thin lens can complete the Fourier transform of the input signal and the inverse propagation of light can be implemented in a program.Using both of the two functions can realize the iteration process to calculate the near-field distribution of light and the far-field repeatedly,which is similar to the G-S algorithm.The results show that using the optical diffraction method can design a CPP for a complicated laser system,and make the CPP have abilities of beam shaping and phase compensation for the phase aberration of the system.The method can improve the adaptation of the phase plate in systems with phase aberrations.展开更多
电场耦合无线电能传输(electric-field coupled wireless power transfer,EC-WPT)系统具有耦合机构轻薄且成本低、对耦合机构之间或周围导体产生的涡流损耗小等优点,适用于电动车动态无线充电应用。该文构建一种基于分段式耦合机构的动...电场耦合无线电能传输(electric-field coupled wireless power transfer,EC-WPT)系统具有耦合机构轻薄且成本低、对耦合机构之间或周围导体产生的涡流损耗小等优点,适用于电动车动态无线充电应用。该文构建一种基于分段式耦合机构的动态EC-WPT系统,以双边LC补偿的动态EC-WPT系统为对象建立系统的数学模型,对系统的接收极板在分段式导轨上方移动时系统的输出特性进行理论推导;给出一种分段式导轨的供电切换策略;以提升系统传输性能及耦合机构抗横向偏移能力等为目标,给出一种分段式耦合机构的参数设计方法;建立系统的仿真模型对接收极板运动过程中系统的输出功率进行分析;搭建一套实验装置对所设计系统及参数设计方法的合理性进行验证。仿真和实验结果表明,接收极板在相邻两段导轨过渡区域时系统的输出功率变化趋势与理论结果一致。展开更多
Traditional busbar design is inefficient, costly, and error-prone because of frequent changes of requirements. This paper proposes a semantic-driven method for designing 3D busbars to solve this problem. The design pr...Traditional busbar design is inefficient, costly, and error-prone because of frequent changes of requirements. This paper proposes a semantic-driven method for designing 3D busbars to solve this problem. The design process contains two main parts, namely, semantic-driven routing design and automatic routing segmentation. Semantic-driven routing design creates a relation table between electrical semantics and 3D modeling parameters, as well as helps designers create routings efficiently using electrical parameters as input. Automatic routing segmentation can convert routings into busbar segments that also include manufacturing information. Because the design operations are associated with one another, the resulting busbars can automatically be changed in real time when requirements are changed.展开更多
基金supported by National Natural Science Foundation of China(Grant No. 51275284)Program for New Century Excellent Talents in University of China(Grant No. NCET-10-0567)the Research Fund of State Key Lab of Mechanical Systems and Vibration(Grant No.MSV-ZD-2010-02)
文摘The segment erector is a key part of the shield machines for tunnel engineering. The available segment erectors are all of serial configuration which is suffering from the problems of low rigidity and accumulative motion errors. The current research mainly focuses on improving assembly accuracy and control performance of serial segment erectors. An innovative design method is proposed featuring motion group-decoupling, based on which a new type of segment erector is developed and investigated. Firstly, the segment installation manipulation is analyzed and decomposed into three motion groups that are decoupled. Then the type synthesis for the 4-DOF motion group is performed based on the general function（GF） set theory and a new configuration of （1T？1R？1PS3UPS） is attained according to the segment manipulation requirements. Consequently, the kinematic models are built and the reducibility and accuracy are analyzed. The dexterity is verified though numerical simulation and no singular points appear in the workspace. Finally, a positioning experiment is carried out by using the prototype developed in the lab that demonstrates a 13.1% improvement of positioning accuracy and the feasibility of the new segment erector. The presented group-decoupling design method is able to invent new type of hybrid segment erectors that avoid the accumulative motion error of erecting.
基金Project supported by the National High Technology Research and Development Program of China (Grant No 2006AA01Z339)
文摘The segmented mirror telescope is widely used.The aberrations of segmented mirror systems are different from single mirror systems.This paper uses the Fourier optics theory to analyse the Zernike aberrations of segmented mirror systems.It concludes that the Zernike aberrations of segmented mirror systems obey the linearity theorem.The design of a segmented space telescope and segmented schemes are discussed,and its optical model is constructed. The computer simulation experiment is performed with this optical model to verify the suppositions. The experimental results confirm the correctness of the model.
文摘This paper discusses the basic principle and design m ethod for light distribution of car lamp, introduces an important development: h igh efficient and flexible car lamp with reflecting light distribution-segmente d reflector (multi-patch) car lamp, and puts out a design method for segmented reflector based on error analysis. Unlike classical car lamp with refractive lig ht distribution, the method of reflecting light distribution gives car lamp desi gn more flexibility. In the case of guarantying the lightness of car lamp and sa tisfying the standard demand for the light distribution, the design of the exter ior of the car lamp has more freedom. The high gradient of car lamp is more suit able for the demand of streamline of the car exterior. The shape of segmented re flector obtained by theory calculating of car lamp reflecting light distribution is only an ideal shape, which usually has considerable differences with the fin al shape and will influences light distribution. There exist difference between the calculated reflector and manufactured reflector. Owing to light reflecting c haracter, the small diversification of the reflector will reduce the big diver sification of the light distribution shape on light distribution screen in 25 -meter place, so light distribution quality can’t be ensured. To ensure the re flector by light distribution calculation accordance to reflector by practical m anufacture, the error effect of surface shape must be reasonably considered name ly the error effect of manufacture tache. The paper establishes error-analyzing model for segmented reflector according to the analysis of error of making proc ess for segmented reflector. Based on this error-analyzing model and by use of the analyzing software developed for segmented reflector light distribution, it could reasonably consider reflector errors made by manufacturing, such as reflec tor surface spray-painting and plating aluminum, which could give out shapes of reflector patches for segmented reflector well and truly, and direct the plan o f making process efficiently. The method put by the paper has successfully appli ed to develop segmented reflector lamp for several type cars and obtained good e ffect for the factory.
文摘Continuous phase plate（CPP）,which has a function of beam shaping in laser systems,is one kind of important diffractive optics.Based on the Fourier transform of the Gerchberg-Saxton（G-S） algorithm for designing CPP,we proposed an optical diffraction method according to the real system conditions.A thin lens can complete the Fourier transform of the input signal and the inverse propagation of light can be implemented in a program.Using both of the two functions can realize the iteration process to calculate the near-field distribution of light and the far-field repeatedly,which is similar to the G-S algorithm.The results show that using the optical diffraction method can design a CPP for a complicated laser system,and make the CPP have abilities of beam shaping and phase compensation for the phase aberration of the system.The method can improve the adaptation of the phase plate in systems with phase aberrations.
文摘电场耦合无线电能传输(electric-field coupled wireless power transfer,EC-WPT)系统具有耦合机构轻薄且成本低、对耦合机构之间或周围导体产生的涡流损耗小等优点,适用于电动车动态无线充电应用。该文构建一种基于分段式耦合机构的动态EC-WPT系统,以双边LC补偿的动态EC-WPT系统为对象建立系统的数学模型,对系统的接收极板在分段式导轨上方移动时系统的输出特性进行理论推导;给出一种分段式导轨的供电切换策略;以提升系统传输性能及耦合机构抗横向偏移能力等为目标,给出一种分段式耦合机构的参数设计方法;建立系统的仿真模型对接收极板运动过程中系统的输出功率进行分析;搭建一套实验装置对所设计系统及参数设计方法的合理性进行验证。仿真和实验结果表明,接收极板在相邻两段导轨过渡区域时系统的输出功率变化趋势与理论结果一致。
基金Supported by National Key Technologies R&D Program of China(2015BAF23B03)National Nature Science Foundation of China(61672307)
文摘Traditional busbar design is inefficient, costly, and error-prone because of frequent changes of requirements. This paper proposes a semantic-driven method for designing 3D busbars to solve this problem. The design process contains two main parts, namely, semantic-driven routing design and automatic routing segmentation. Semantic-driven routing design creates a relation table between electrical semantics and 3D modeling parameters, as well as helps designers create routings efficiently using electrical parameters as input. Automatic routing segmentation can convert routings into busbar segments that also include manufacturing information. Because the design operations are associated with one another, the resulting busbars can automatically be changed in real time when requirements are changed.
