Two types of stress relaxation tests were carried out to investigate the incubation time for incipient precipi-tation of Ti（C,N） in deformed austenite and （Ti,Mo）C in ferrite of ferritic Ti-Mo microalloyed steel T...Two types of stress relaxation tests were carried out to investigate the incubation time for incipient precipi-tation of Ti（C,N） in deformed austenite and （Ti,Mo）C in ferrite of ferritic Ti-Mo microalloyed steel The size dis-tribution, amount and chemical composition of precipitates were obtained by using physicochemical phase analysis, and calculated according to thermodynamics and kinetics. The experimental results demonstrated that the incubation time was reduced with increasing Ti content, and prolonged with the addition of Mo. After 30 % deformation at 850 ℃, the nucleation of strain-induced Ti（C,N） was a relatively slow process. On the other hand, the temperature where the nucleation rate of （Ti, Mo）C in ferrite was the highest descended first and then ascended with increasing Ti content, and so did the temperature where the incubation time was the shortest. The key point is that the tempera-ture of steel containing about 0.09 % Ti is the lowest. The mass fraction of MC-type particles with size smaller than 10 nm in steel containing 0.09% Ti and 0.2% Mo reached 73.7%. The size distributions of precipitates in steel containing 0.09% Ti were relatively concentrated compared with that in steel containing 0.07% Ti.展开更多
滚动摩擦沉积增材(Additive Friction Rolling Deposition,AFRD)是一种新兴的金属固态增材制造技术,特别适用于基于熔合增材制造方法易产生凝固缺陷的高强度铝合金。采用AFRD方法进行2024-O铝合金增材,获得全致密无缺陷的四层增材试件,...滚动摩擦沉积增材(Additive Friction Rolling Deposition,AFRD)是一种新兴的金属固态增材制造技术,特别适用于基于熔合增材制造方法易产生凝固缺陷的高强度铝合金。采用AFRD方法进行2024-O铝合金增材,获得全致密无缺陷的四层增材试件,利用金相显微镜、扫描电子显微镜对不同旋转速度增材试件宏观形貌、微观组织进行了表征。结果表明:(1)沉积层组织致密,无夹杂、裂纹等缺陷、相邻两沉积层之间形成良好的冶金结合。(2)沉积层呈现细小的轴晶粒组织,随着旋转速度升高,晶粒尺寸呈下降趋势。(3)沉积层第二相粒子呈现点片状分布于Al基体上,随着转速增大,第二相粒子趋向于细化与均匀。展开更多
基金Item Sponsored by National Key Technology Research and Development Program in 11th Five-Year Plan of China (2006BE03A0)
文摘Two types of stress relaxation tests were carried out to investigate the incubation time for incipient precipi-tation of Ti（C,N） in deformed austenite and （Ti,Mo）C in ferrite of ferritic Ti-Mo microalloyed steel The size dis-tribution, amount and chemical composition of precipitates were obtained by using physicochemical phase analysis, and calculated according to thermodynamics and kinetics. The experimental results demonstrated that the incubation time was reduced with increasing Ti content, and prolonged with the addition of Mo. After 30 % deformation at 850 ℃, the nucleation of strain-induced Ti（C,N） was a relatively slow process. On the other hand, the temperature where the nucleation rate of （Ti, Mo）C in ferrite was the highest descended first and then ascended with increasing Ti content, and so did the temperature where the incubation time was the shortest. The key point is that the tempera-ture of steel containing about 0.09 % Ti is the lowest. The mass fraction of MC-type particles with size smaller than 10 nm in steel containing 0.09% Ti and 0.2% Mo reached 73.7%. The size distributions of precipitates in steel containing 0.09% Ti were relatively concentrated compared with that in steel containing 0.07% Ti.
文摘滚动摩擦沉积增材(Additive Friction Rolling Deposition,AFRD)是一种新兴的金属固态增材制造技术,特别适用于基于熔合增材制造方法易产生凝固缺陷的高强度铝合金。采用AFRD方法进行2024-O铝合金增材,获得全致密无缺陷的四层增材试件,利用金相显微镜、扫描电子显微镜对不同旋转速度增材试件宏观形貌、微观组织进行了表征。结果表明:(1)沉积层组织致密,无夹杂、裂纹等缺陷、相邻两沉积层之间形成良好的冶金结合。(2)沉积层呈现细小的轴晶粒组织,随着旋转速度升高,晶粒尺寸呈下降趋势。(3)沉积层第二相粒子呈现点片状分布于Al基体上,随着转速增大,第二相粒子趋向于细化与均匀。
