[Objective] The aim was to research effects of bamboo split curing method and steely barn curing method on quality of yellow sun-cured tobacco, providing scientific references for optimization of curing technology of ...[Objective] The aim was to research effects of bamboo split curing method and steely barn curing method on quality of yellow sun-cured tobacco, providing scientific references for optimization of curing technology of yellow sun-cured tobacco. [method] The tobaccos were divided into two groups treated with two methods and the related indices of treated tobaccos were then measured to evaluate effects of curing methods on quality of yellow sun-cured tobacco. [Result] Tobaccos treated with two methods were all dominated by reddish yellow and yellow; exterior quality differed little. In detail, total sugar and reducing sugar in an average level in three locations were all higher with method A than those with method B, but nicotine and total N were lower; comprehensive chemical components in group with method B proved more appropriate with higher K. In addition, sensory qualities of leaves in moderate and bottom locations were better with method B compared with method A; sensory quality of top leaves was better; comprehensive sensory quality of leaves treated with method B proved better. On the other hand, cost for method A was 2.82 times of method B; the area of sun-curing field was 3.27 times and manage- ment work was 1.77 times, which indicated that method B is low-cost and time-saving, which would be a guarantee of tobacco quality. [Conclusion] The research provides scientific references for rational use of tobacco resources and optimization of sun-curing technology.展开更多
Curing methods are one of the most important factors in determining the quality and compactness of cover concrete.The effect of curing methods on the water absorption and sorptivity coefficient of cover concrete with ...Curing methods are one of the most important factors in determining the quality and compactness of cover concrete.The effect of curing methods on the water absorption and sorptivity coefficient of cover concrete with the substitution ratio of fly ash(FA)and ground granulated blast slag(GGBS)for cement between 30 wt%and 40 wt%was studied by capillary water absorption test.The vacuum saturation test and mercury intrusion test were employed to characterize these differences in the pore structure of cover concrete under different curing methods.With further analysis of the compactness of microstructure by SEM,the mechanism of the impact of curing methods on the permeability of cover concrete was revealed.The results obtained indicate that the effect of curing methods on the water absorption,sorptivity coefficient and porosity of cover concrete shows the trend of natural curing>cover curing>water curing>standard curing.It is also shown that reasonable curing is advantageous to reduce the porosity and permeability of cover concrete.In natural curing conditions,the appearance of porosity increasing and pore structure coarsening is more critical for covering concrete with mineral admixtures than for pure cement concrete.Therefore,the permeability of cover concrete with mineral admixtures is more sensitive to the early-age curing methods.展开更多
[Objectives]To compare the benefits of different tobacco loading methods and supporting baking processes in intensive curing houses.[Methods]Flue-cured tobacco variety K326 was taken as material,and comparative experi...[Objectives]To compare the benefits of different tobacco loading methods and supporting baking processes in intensive curing houses.[Methods]Flue-cured tobacco variety K326 was taken as material,and comparative experiment on baking effects of six tobacco loading methods(traditional hanging pole,loose leaf stacking,loose leaf binding and inserting,loose leaf inserting,loose leaf net basket,loose leaf grid)was conducted.[Results]Cost of dry tobacco loading equipment for hanging pole and loose leaf stacking was 0.01 and 0.1 yuan/kg,and cost of tobacco loading by loose leaf basket reached 0.36 yuan/kg.Labor cost for baking dry tobacco by direct stacking of loose leaves reached 2.02 yuan/kg,which was the lowest,while labor cost for binding and inserting loose leaves reached 2.44 yuan/kg,which was the highest.Energy consumption cost of dry tobacco baking with loose leaf grid was 1.06 yuan/kg,which was the lowest,while baking energy consumption cost of loose leaf stacking reached 1.23 yuan/kg,which was the highest.From the perspective of baking income,loose leaf inserting reached 21.36 yuan/kg,which was the lowest,while net basket reached 27.79 yuan/kg,which was the highest,followed by grid(23.46 yuan/kg)and loose leaf binding and inserting(22.5 yuan/kg).[Conclusions]It is worth popularizing the loose leaf binding and inserting and the loose leaf grid baking.展开更多
This paper studies the interface curing stresses between polymethyl methacrylate(PMMA)and composite by means of digital speckle correlation method(DSCM).A new method by combining DSCM with the marker points is develop...This paper studies the interface curing stresses between polymethyl methacrylate(PMMA)and composite by means of digital speckle correlation method(DSCM).A new method by combining DSCM with the marker points is developed to measure the interface curing stresses,and the measurement principle is introduced.The interface curing stresses between PMMA and composite with different curing bonding conditions are measured and analyzed,this indicates that the residual stress for furnace heating and furnace cooling is the smallest.Finally,the measurement error is discussed by means of finite element method,the influences of glass microsphere between adhesive and PMMA can be ignored.展开更多
Fiber-reinforced phenolic composite has become an ideal material for solid rocket motor’s(SRM)nozzle,because of its excellent high temperature resistance and ablation resistance.The physical and chemical properties o...Fiber-reinforced phenolic composite has become an ideal material for solid rocket motor’s(SRM)nozzle,because of its excellent high temperature resistance and ablation resistance.The physical and chemical properties of reinforcing fiber would significantly affect the cure reaction of phenolic(PF)resin,which results in the obvious difference between the cure characteristics of the fiberreinforced phenolic system and neat resin.To clarify the difference in cure reaction between fiber-reinforced phenolic system and PF resin,meanwhile,to obtain the kinetics of high silica glass fiber/phenolic(GF-HSi/PF)prepreg and carbon fiber/phenolic(CF/PF)prepreg,the dynamic experiments of PF resin,GF-HSi/PF prepreg and CF/PF prepreg are carried out by differential scanning calorimetry(DSC).Iso-conversional kinetics is proposed,and the activation energy is determined as a function of cure degree.The reaction model f(α)is obtained by introducing the kinetics compensation effect,founding that the f(α)of PF resin is influenced significantly by reinforcing fiber.The kinetics of three materials are determined by the model-fitting method,founding that the kinetic models of PF resin,GF-HSi/PF prepreg and CF/PF prepreg are a one-step autocatalytic model,two-step model from autocatalytic reaction to N-order reaction and three-step model from autocatalytic reaction to N-order reaction respectively.展开更多
Using novolac phenolic resin, aniline and formaldehyde as raw materials, benzoxazine-phenolic copolymers with different percentages of benzoxazine rings were prepared. FT-IR was adopted to characterize the molecular s...Using novolac phenolic resin, aniline and formaldehyde as raw materials, benzoxazine-phenolic copolymers with different percentages of benzoxazine rings were prepared. FT-IR was adopted to characterize the molecular structure of the novolac-type phenolic resin and the benzoxazine-phenolic copolymer BP31. In order to understand the curing process of the copolymers, the curing behavior and curing kinetic characteristics were studied by differential scanning calorimetry （DSC）, and the catalytical effect of phenolic hydroxyl on the curing behavior of copolymers was investigated. To investigate the thermal properties of this resin, the thermal degradation behaviors of the cured samples were studied by thermal gravimetric （TG） method, and glass-transition temperatures （Tg） of the cured copolymers were also evaluated by DSC. The dynamic Ozawa method was adopted to determine the kinetic parameters of the curing process as well. The activation energy is 78.8 kJ/mol and the reaction rate constant is in the range from 40.0 to 5.2 （K/min）＂ according to reaction temperatures. The Ozawa exponent decreases from 2.4 to 0.7 with the increase of reaction temperature, and curing mechanism is expounded briefly according to the results. TG result shows that the highest char yield of copolymers is 50.3%. The highest Tg of copolymers is 489 K, which is much higher than that of pure benzoxazine resin.展开更多
The effect of curing age on chloride diffusion coefficient of recycled aggregate concrete subjected to different compressive stresses was investigated.A compression loading setup was both designed and fabricated.The c...The effect of curing age on chloride diffusion coefficient of recycled aggregate concrete subjected to different compressive stresses was investigated.A compression loading setup was both designed and fabricated.The chloride diffusion coefficients of recycled aggregate concrete under compressive stresses were measured by the rapid chloride ion migration(RCM)method.The experimental results show that the chloride diffusion coefficients of recycled aggregate concrete(RAC)under different compressive stress ratios generally decrease with the increase of curing age.For RAC subjected to the same compressive stress ratios,the chloride diffusion coefficients approximately have power functions with curing ages and the relationship models are proposed.Moreover,the influence of curing age on chloride diffusion coefficient firstly decreases and then increases as the compressive stress ratio increases.展开更多
Resin transfer molding(RTM)is among the most used manufacturing processes for composite parts.Initially,the resin cure is initiated by heat supply to the mold.The supplementary heat generated during the reaction can c...Resin transfer molding(RTM)is among the most used manufacturing processes for composite parts.Initially,the resin cure is initiated by heat supply to the mold.The supplementary heat generated during the reaction can cause thermal gradients in the composite,potentially leading to undesired residual stresses which can cause shrinkage and warpage.In the present numerical study of these processes,a one-dimensional finite difference method is used to predict the temperature evolution and the degree of cure in the course of the resin polymerization;the effect of some parameters on the thermal gradient is then analyzed,namely:the fiber nature,the use of multiple layers of reinforcement with different thermal properties and also the temperature cycle variation.The validity of this numerical model is tested by comparison with experimental and numerical results in the existing literature.展开更多
The common defects of the Roe scheme are the non-physical expansion shock and shock instability. By removing the momentum interpolation mechanism(MIM), an improved method with several advantages has been presented to ...The common defects of the Roe scheme are the non-physical expansion shock and shock instability. By removing the momentum interpolation mechanism(MIM), an improved method with several advantages has been presented to suppress the shock instability. However, it cannot prevent the expansion shock and is incompatible with the traditional curing method for expansion shock. To solve the problem, the traditional curing mechanism is analyzed. Effectiveness of the traditional curing method is discussed,and several defects are identified, one of which leads to incompatibility between curing shock instability and expansion shock. Consequently, an improved Roe scheme is proposed, which is with low computational costs, concise, easy to implement, and robust.More importantly, the proposed scheme can simultaneously solve the problem of shock instability and expansion shock without additional costs.展开更多
In this paper, the kind of remanent small molecules in unsaturated polyester res(?) (UP resin) , the best extractant and the best suitalbe extractive time for measuring the content of these small molecules were studie...In this paper, the kind of remanent small molecules in unsaturated polyester res(?) (UP resin) , the best extractant and the best suitalbe extractive time for measuring the content of these small molecules were studied using ultraviolet- visible spectrophotometry ( UV-VIS method). According to the principle of additivity lightness absorption for mixid solution, the contents of samll molecules in several kinds of cured UP resin were measured. It is pointed out that the UV-VIS method in the assay quality of food grade GRP products is more suitable to China.展开更多
A mathematical model is made which describes the curing process of composites constructed from continuous fiber-reinforced, thermosetting resin matrix prepreg materials, and the consolidation of the composite is devel...A mathematical model is made which describes the curing process of composites constructed from continuous fiber-reinforced, thermosetting resin matrix prepreg materials, and the consolidation of the composite is developed. The model provides the variation of temperature distribution, the cure reaction process in the resin, the resin flow and fibers stress inside the composite, and the void variation and the residual stress distribution. It can be used to illustrate the mechanism of curing process and optimize the cure cycle of composite material in order to ensure the quality of a product.展开更多
基金Supported by China Tobacco Yunnan Indutrial Co.Ltd Scientific Program(2010YL02)~~
文摘[Objective] The aim was to research effects of bamboo split curing method and steely barn curing method on quality of yellow sun-cured tobacco, providing scientific references for optimization of curing technology of yellow sun-cured tobacco. [method] The tobaccos were divided into two groups treated with two methods and the related indices of treated tobaccos were then measured to evaluate effects of curing methods on quality of yellow sun-cured tobacco. [Result] Tobaccos treated with two methods were all dominated by reddish yellow and yellow; exterior quality differed little. In detail, total sugar and reducing sugar in an average level in three locations were all higher with method A than those with method B, but nicotine and total N were lower; comprehensive chemical components in group with method B proved more appropriate with higher K. In addition, sensory qualities of leaves in moderate and bottom locations were better with method B compared with method A; sensory quality of top leaves was better; comprehensive sensory quality of leaves treated with method B proved better. On the other hand, cost for method A was 2.82 times of method B; the area of sun-curing field was 3.27 times and manage- ment work was 1.77 times, which indicated that method B is low-cost and time-saving, which would be a guarantee of tobacco quality. [Conclusion] The research provides scientific references for rational use of tobacco resources and optimization of sun-curing technology.
基金The authors would like to acknowledge the financial support provided by the National Key R&D Program of China(Grant number2018YFB1600100)this study is also funded by Shandong Transportation Science and Technology Plan(grant number 2018B44).
文摘Curing methods are one of the most important factors in determining the quality and compactness of cover concrete.The effect of curing methods on the water absorption and sorptivity coefficient of cover concrete with the substitution ratio of fly ash(FA)and ground granulated blast slag(GGBS)for cement between 30 wt%and 40 wt%was studied by capillary water absorption test.The vacuum saturation test and mercury intrusion test were employed to characterize these differences in the pore structure of cover concrete under different curing methods.With further analysis of the compactness of microstructure by SEM,the mechanism of the impact of curing methods on the permeability of cover concrete was revealed.The results obtained indicate that the effect of curing methods on the water absorption,sorptivity coefficient and porosity of cover concrete shows the trend of natural curing>cover curing>water curing>standard curing.It is also shown that reasonable curing is advantageous to reduce the porosity and permeability of cover concrete.In natural curing conditions,the appearance of porosity increasing and pore structure coarsening is more critical for covering concrete with mineral admixtures than for pure cement concrete.Therefore,the permeability of cover concrete with mineral admixtures is more sensitive to the early-age curing methods.
文摘[Objectives]To compare the benefits of different tobacco loading methods and supporting baking processes in intensive curing houses.[Methods]Flue-cured tobacco variety K326 was taken as material,and comparative experiment on baking effects of six tobacco loading methods(traditional hanging pole,loose leaf stacking,loose leaf binding and inserting,loose leaf inserting,loose leaf net basket,loose leaf grid)was conducted.[Results]Cost of dry tobacco loading equipment for hanging pole and loose leaf stacking was 0.01 and 0.1 yuan/kg,and cost of tobacco loading by loose leaf basket reached 0.36 yuan/kg.Labor cost for baking dry tobacco by direct stacking of loose leaves reached 2.02 yuan/kg,which was the lowest,while labor cost for binding and inserting loose leaves reached 2.44 yuan/kg,which was the highest.Energy consumption cost of dry tobacco baking with loose leaf grid was 1.06 yuan/kg,which was the lowest,while baking energy consumption cost of loose leaf stacking reached 1.23 yuan/kg,which was the highest.From the perspective of baking income,loose leaf inserting reached 21.36 yuan/kg,which was the lowest,while net basket reached 27.79 yuan/kg,which was the highest,followed by grid(23.46 yuan/kg)and loose leaf binding and inserting(22.5 yuan/kg).[Conclusions]It is worth popularizing the loose leaf binding and inserting and the loose leaf grid baking.
基金supported by the National Basic Research Program (973 Program) of China (2011CB606105)
文摘This paper studies the interface curing stresses between polymethyl methacrylate(PMMA)and composite by means of digital speckle correlation method(DSCM).A new method by combining DSCM with the marker points is developed to measure the interface curing stresses,and the measurement principle is introduced.The interface curing stresses between PMMA and composite with different curing bonding conditions are measured and analyzed,this indicates that the residual stress for furnace heating and furnace cooling is the smallest.Finally,the measurement error is discussed by means of finite element method,the influences of glass microsphere between adhesive and PMMA can be ignored.
基金This work was supported by the National Natural Science Foundation of China(Grant No.U1837601).
文摘Fiber-reinforced phenolic composite has become an ideal material for solid rocket motor’s(SRM)nozzle,because of its excellent high temperature resistance and ablation resistance.The physical and chemical properties of reinforcing fiber would significantly affect the cure reaction of phenolic(PF)resin,which results in the obvious difference between the cure characteristics of the fiberreinforced phenolic system and neat resin.To clarify the difference in cure reaction between fiber-reinforced phenolic system and PF resin,meanwhile,to obtain the kinetics of high silica glass fiber/phenolic(GF-HSi/PF)prepreg and carbon fiber/phenolic(CF/PF)prepreg,the dynamic experiments of PF resin,GF-HSi/PF prepreg and CF/PF prepreg are carried out by differential scanning calorimetry(DSC).Iso-conversional kinetics is proposed,and the activation energy is determined as a function of cure degree.The reaction model f(α)is obtained by introducing the kinetics compensation effect,founding that the f(α)of PF resin is influenced significantly by reinforcing fiber.The kinetics of three materials are determined by the model-fitting method,founding that the kinetic models of PF resin,GF-HSi/PF prepreg and CF/PF prepreg are a one-step autocatalytic model,two-step model from autocatalytic reaction to N-order reaction and three-step model from autocatalytic reaction to N-order reaction respectively.
基金Project (20050106) supported by the Key Science and Technology Item of Guangdong Province,China
文摘Using novolac phenolic resin, aniline and formaldehyde as raw materials, benzoxazine-phenolic copolymers with different percentages of benzoxazine rings were prepared. FT-IR was adopted to characterize the molecular structure of the novolac-type phenolic resin and the benzoxazine-phenolic copolymer BP31. In order to understand the curing process of the copolymers, the curing behavior and curing kinetic characteristics were studied by differential scanning calorimetry （DSC）, and the catalytical effect of phenolic hydroxyl on the curing behavior of copolymers was investigated. To investigate the thermal properties of this resin, the thermal degradation behaviors of the cured samples were studied by thermal gravimetric （TG） method, and glass-transition temperatures （Tg） of the cured copolymers were also evaluated by DSC. The dynamic Ozawa method was adopted to determine the kinetic parameters of the curing process as well. The activation energy is 78.8 kJ/mol and the reaction rate constant is in the range from 40.0 to 5.2 （K/min）＂ according to reaction temperatures. The Ozawa exponent decreases from 2.4 to 0.7 with the increase of reaction temperature, and curing mechanism is expounded briefly according to the results. TG result shows that the highest char yield of copolymers is 50.3%. The highest Tg of copolymers is 489 K, which is much higher than that of pure benzoxazine resin.
基金supported by the Fundamental Research Funds for the Central UniversitiesFoundation of Graduate Innovation Center in Nanjing University of Aeronautics and Astronautics (No.kfjj20150105)the National Natural Science Foundation of China (No. 51279074)
文摘The effect of curing age on chloride diffusion coefficient of recycled aggregate concrete subjected to different compressive stresses was investigated.A compression loading setup was both designed and fabricated.The chloride diffusion coefficients of recycled aggregate concrete under compressive stresses were measured by the rapid chloride ion migration(RCM)method.The experimental results show that the chloride diffusion coefficients of recycled aggregate concrete(RAC)under different compressive stress ratios generally decrease with the increase of curing age.For RAC subjected to the same compressive stress ratios,the chloride diffusion coefficients approximately have power functions with curing ages and the relationship models are proposed.Moreover,the influence of curing age on chloride diffusion coefficient firstly decreases and then increases as the compressive stress ratio increases.
文摘Resin transfer molding(RTM)is among the most used manufacturing processes for composite parts.Initially,the resin cure is initiated by heat supply to the mold.The supplementary heat generated during the reaction can cause thermal gradients in the composite,potentially leading to undesired residual stresses which can cause shrinkage and warpage.In the present numerical study of these processes,a one-dimensional finite difference method is used to predict the temperature evolution and the degree of cure in the course of the resin polymerization;the effect of some parameters on the thermal gradient is then analyzed,namely:the fiber nature,the use of multiple layers of reinforcement with different thermal properties and also the temperature cycle variation.The validity of this numerical model is tested by comparison with experimental and numerical results in the existing literature.
基金Project supported by the National Natural Science Foundation of China(Nos.51736008 and 51276092)
文摘The common defects of the Roe scheme are the non-physical expansion shock and shock instability. By removing the momentum interpolation mechanism(MIM), an improved method with several advantages has been presented to suppress the shock instability. However, it cannot prevent the expansion shock and is incompatible with the traditional curing method for expansion shock. To solve the problem, the traditional curing mechanism is analyzed. Effectiveness of the traditional curing method is discussed,and several defects are identified, one of which leads to incompatibility between curing shock instability and expansion shock. Consequently, an improved Roe scheme is proposed, which is with low computational costs, concise, easy to implement, and robust.More importantly, the proposed scheme can simultaneously solve the problem of shock instability and expansion shock without additional costs.
文摘In this paper, the kind of remanent small molecules in unsaturated polyester res(?) (UP resin) , the best extractant and the best suitalbe extractive time for measuring the content of these small molecules were studied using ultraviolet- visible spectrophotometry ( UV-VIS method). According to the principle of additivity lightness absorption for mixid solution, the contents of samll molecules in several kinds of cured UP resin were measured. It is pointed out that the UV-VIS method in the assay quality of food grade GRP products is more suitable to China.
文摘A mathematical model is made which describes the curing process of composites constructed from continuous fiber-reinforced, thermosetting resin matrix prepreg materials, and the consolidation of the composite is developed. The model provides the variation of temperature distribution, the cure reaction process in the resin, the resin flow and fibers stress inside the composite, and the void variation and the residual stress distribution. It can be used to illustrate the mechanism of curing process and optimize the cure cycle of composite material in order to ensure the quality of a product.
