The FEM analysis of stress and deformation of steel base of the special diamond saw blades are carried out.The small carbide round segments are welded on the side of blades in order to increase the side wear re sistan...The FEM analysis of stress and deformation of steel base of the special diamond saw blades are carried out.The small carbide round segments are welded on the side of blades in order to increase the side wear re sistance of blade.Comparing with conventional saw blade,the maximum stress val ues of reasonable special saw blade are reduced respectively about 17%20% 33%,and the maximum deformation values are reduced respectively about 26%22 %44.7%in thetangential(X),radial(Y)and axial(Z)direction.The stress conce ntration zone is decreased for the special structure diamond saw blade.The stru ctures of diamond saw blade with different number of hard material pellet are an alyzed and optimized.展开更多
The article investigates the problem of lightening the construction of the saw cylinder of the gin by drilling a central longitudinal through hole on the shaft and cutting circular holes on the saw blades. This is acc...The article investigates the problem of lightening the construction of the saw cylinder of the gin by drilling a central longitudinal through hole on the shaft and cutting circular holes on the saw blades. This is accompanied by a relatively large decrease in the mass of the saw cylinder and a relatively smaller decrease in the axial moment of inertia of the cross-sectional area of the shaft, which provides the maximum deflection of the saw cylinder under the action of its own gravity in the middle of the span is from 0.450 mm to 0.406 mm.展开更多
Four wear modes and four wear mechanisms of diamonds in sawblades are identified in a study of varied segments damaged in field operation of sawing hard stone. The four wear mechanisms are impactshearing, fatiguing, p...Four wear modes and four wear mechanisms of diamonds in sawblades are identified in a study of varied segments damaged in field operation of sawing hard stone. The four wear mechanisms are impactshearing, fatiguing, pullingout and thermal effects. Surface erosion is the result of thermal effects, while impactshearing and fatiguing lead to macro and microfracture, and pullingout results in wholesale dislodgement of diamonds provided the inequality Fn>M/(μλδ) is satisfied.展开更多
A rigorous analysis of surface acoustic wave (SAW) reflection and scattering by electrodes is of paramount impor- tance in the design of SAW identification tags and sensors. In this paper, a new method based on Green...A rigorous analysis of surface acoustic wave (SAW) reflection and scattering by electrodes is of paramount impor- tance in the design of SAW identification tags and sensors. In this paper, a new method based on Green’s function concept is used to study reflection and scattering coefficients. By this method the reflection coefficient with its phase angle, transmission coeffi- cient, and bulk wave scattering coefficient, can be obtained rapidly and accurately. To get precise result, the influence of static charge must be taken into account. In the work, we successfully cancelled out the effect of static charge and the validity of the results was checked. As an example, the reflection, transmission and scattering coefficients of a single grounded electrode on 128° YX LiNbO3 is shown.展开更多
The 1994 China International Garment Fair was held in Beijing in late spring at the China International Exhibition Center with the participation of over 300 enterprises from around the world. The exhibition hall was c...The 1994 China International Garment Fair was held in Beijing in late spring at the China International Exhibition Center with the participation of over 300 enterprises from around the world. The exhibition hall was covered with colourful garments from different countries. Renowned mannequins showed the charms of the Western and Oriental apparel. With the approval of the China National Textile Council and the Ministry of Foreign Trade and Economic Cooperation, the 1994 fair was sponsored by the China Garment Research and Design Center (group), China International Trade Center, Textile Sub-展开更多
文摘The FEM analysis of stress and deformation of steel base of the special diamond saw blades are carried out.The small carbide round segments are welded on the side of blades in order to increase the side wear re sistance of blade.Comparing with conventional saw blade,the maximum stress val ues of reasonable special saw blade are reduced respectively about 17%20% 33%,and the maximum deformation values are reduced respectively about 26%22 %44.7%in thetangential(X),radial(Y)and axial(Z)direction.The stress conce ntration zone is decreased for the special structure diamond saw blade.The stru ctures of diamond saw blade with different number of hard material pellet are an alyzed and optimized.
文摘The article investigates the problem of lightening the construction of the saw cylinder of the gin by drilling a central longitudinal through hole on the shaft and cutting circular holes on the saw blades. This is accompanied by a relatively large decrease in the mass of the saw cylinder and a relatively smaller decrease in the axial moment of inertia of the cross-sectional area of the shaft, which provides the maximum deflection of the saw cylinder under the action of its own gravity in the middle of the span is from 0.450 mm to 0.406 mm.
文摘Four wear modes and four wear mechanisms of diamonds in sawblades are identified in a study of varied segments damaged in field operation of sawing hard stone. The four wear mechanisms are impactshearing, fatiguing, pullingout and thermal effects. Surface erosion is the result of thermal effects, while impactshearing and fatiguing lead to macro and microfracture, and pullingout results in wholesale dislodgement of diamonds provided the inequality Fn>M/(μλδ) is satisfied.
基金Project (Nos. 10074034 and 10304012) supported by the NationalNatural Science Foundation of China
文摘A rigorous analysis of surface acoustic wave (SAW) reflection and scattering by electrodes is of paramount impor- tance in the design of SAW identification tags and sensors. In this paper, a new method based on Green’s function concept is used to study reflection and scattering coefficients. By this method the reflection coefficient with its phase angle, transmission coeffi- cient, and bulk wave scattering coefficient, can be obtained rapidly and accurately. To get precise result, the influence of static charge must be taken into account. In the work, we successfully cancelled out the effect of static charge and the validity of the results was checked. As an example, the reflection, transmission and scattering coefficients of a single grounded electrode on 128° YX LiNbO3 is shown.
文摘The 1994 China International Garment Fair was held in Beijing in late spring at the China International Exhibition Center with the participation of over 300 enterprises from around the world. The exhibition hall was covered with colourful garments from different countries. Renowned mannequins showed the charms of the Western and Oriental apparel. With the approval of the China National Textile Council and the Ministry of Foreign Trade and Economic Cooperation, the 1994 fair was sponsored by the China Garment Research and Design Center (group), China International Trade Center, Textile Sub-
