Pre-stack depth migration velocity analysis is one of the key techniques influencing image quality. As for areas with a rugged surface and complex subsurface, conventional prestack depth migration velocity analysis co...Pre-stack depth migration velocity analysis is one of the key techniques influencing image quality. As for areas with a rugged surface and complex subsurface, conventional prestack depth migration velocity analysis corrects the rugged surface to a known datum or designed surface velocity model on which to perform migration and update the velocity. We propose a rugged surface tomographic velocity inversion method based on angle-domain common image gathers by which the velocity field can be updated directly from the rugged surface without static correction for pre-stack data and improve inversion precision and efficiency. First, we introduce a method to acquire angle-domain common image gathers （ADCIGs） in rugged surface areas and then perform rugged surface tornographic velocity inversion. Tests with model and field data prove the method to be correct and effective.展开更多
We studied finite-element-method-based two-dimensional frequency-domain acoustic FWI under rugged topography conditions. The exponential attenuation boundary condition suitable for rugged topography is proposed to sol...We studied finite-element-method-based two-dimensional frequency-domain acoustic FWI under rugged topography conditions. The exponential attenuation boundary condition suitable for rugged topography is proposed to solve the cutoff botmdary problem as well as to consider the requirement of using the same subdivision grid in joint multifrequency inversion. The proposed method introduces the attenuation factor, and by adjusting it, acoustic waves are sufficiently attenuated in the attenuation layer to minimize the cutoff boundary effect. Based on the law of exponential attenuation, expressions for computing the attenuation factor and the thickness of attenuation layers are derived for different frequencies. In multifrequency-domain FWI, the conjugate gradient method is used to solve equations in the Gauss-Newton algorithm and thus minimize the computation cost in calculating the Hessian matrix. In addition, the effect of initial model selection and frequency combination on FWI is analyzed. Examples using numerical simulations and FWI calculations are used to verify the efficiency of the proposed method.展开更多
The soft switching operation principle and operation performance of rugged resonant pole (RRP) is given. The applications of RRP in soft switching DC DC converter and soft switching inverter are discussed in detail. R...The soft switching operation principle and operation performance of rugged resonant pole (RRP) is given. The applications of RRP in soft switching DC DC converter and soft switching inverter are discussed in detail. RRP can constitute buck boost soft switching DC DC converter and isolated soft switching DC DC converter with the automatic limitation performance of output power. Partial series resonant DC DC converter with RRP can realize the zero voltage/zero current switching of power devices. RR...展开更多
We present a method based on least-squares reverse time migration with plane-wave encoding （P-LSRTM） for rugged topography. Instead of modifying the wave field before migration, we modify the plane-wave encoding fun...We present a method based on least-squares reverse time migration with plane-wave encoding （P-LSRTM） for rugged topography. Instead of modifying the wave field before migration, we modify the plane-wave encoding function and fill constant velocity to the area above rugged topography in the model so that P-LSRTM can be directly performed from rugged surface in the way same to shot domain reverse time migration. In order to improve efficiency and reduce I/O （input/output） cost, the dynamic en- coding strategy and hybrid encoding strategy are implemented. Numerical test on SEG rugged topography model show that P-LSRTM can suppress migration artifacts in the migration image, and compensate am- plitude in the middle-deep part efficiently. Without data correction, P-LSRTM can produce a satisfying image of near-surface if we could get an accurate near-surface velocity model. Moreover, the pre-stack P- LSRTM is more robust than conventional RTM in the presence of migration velocity errors.展开更多
Due to the influences of local topographical factors and terrain inter-shielding, calculation of direct solar radiation （DSR） quantity of rugged terrain is very complex. Based on digital elevation model （DEM） data...Due to the influences of local topographical factors and terrain inter-shielding, calculation of direct solar radiation （DSR） quantity of rugged terrain is very complex. Based on digital elevation model （DEM） data and meteorological observations, a distributed model for calculating DSR over rugged terrain is developed. This model gives an all-sided consideration on factors influencing th a resolution of 1 km × 1 km for thDSR. Using the developed model, normals of annual DSR quantity wie Yellow River Basin was generated, with DEM data as the general characterization of terrain. Characteristics of DSR quantity influenced by geographic and topographic factors over rugged terrain were analyzed thoroughly. Results suggest that： influenced by local topographic factors, i.e. azimuth, slope and so on, and annual DSR quantity over mountainous area has a clear spatial difference; annual DSR quantity of sunny slope （or southern slope） of mountains is obviously larger than that of shady slope （or northern slope）. The calculated DSR quantity of the Yellow River Basin is provided in the same way as other kinds of spatial information and can be employed as basic geographic data for relevant studies as well.展开更多
In Pakistan,the solar analogue has been addressed but its surface geographical parameterization has given least attention.Inappropriate density of stations and their spatial coverage particularly in difficult peripher...In Pakistan,the solar analogue has been addressed but its surface geographical parameterization has given least attention.Inappropriate density of stations and their spatial coverage particularly in difficult peripheral national territories,little or no solar radiation data,non-satisfactory sunshine hours data,and low quality of ground observed cloud cover data create a situation in which the spatial modeling of Extraterrestrial Solar Radiation(ESR) and its ground parameterization got sufficient scope.The Digital Elevation Model (DEM) input into Geographic Information System (GIS) is a compatible tool to demonstrate the spatial distribution of ESR over the rugged terrains of the study domain.For the first time,distributed modeling of ESR is done over the rugged terrains of Pakistan,based on DEM and ArcGIS..Results clearly depict that the complex landforms profoundly disrupt the zonal distribution of ESR in Pakistan.The screening impact of topography is higher on spatial distribution of ESR in winter and considerably low in summer.The combined effect of topography and latitude is obvious.Hence,the model was further testified by plotting Rb (ratio of ESR quantity over rugged terrain against plane surface) against azimuth at different latitudes with different angled slopes.The results clearly support the strong screening effect of rugged terrain through out the country especially in Himalayas,Karakoram and Hindukush (HKH),western border mountains and Balochistan Plateau.This model can be instrumental as baseline geospatial information for scientific investigations in Pakistan,where substantial fraction of national population is living in mountainous regions.展开更多
Strong fluctuation of seabed,abrupt variation in depth and dip of seabed bring seismic imaging problems,such as irregular reflection waves,obvious multiple waves,serious lateral wave development,poor imaging on base s...Strong fluctuation of seabed,abrupt variation in depth and dip of seabed bring seismic imaging problems,such as irregular reflection waves,obvious multiple waves,serious lateral wave development,poor imaging on base surface and depression structure,low signal-to-noise ratio of middle and deep layers.In this paper,Gaussian beam migration imaging method is used to analyze the imaging effect of rugged seabed in deep water area,and the ray tracing method of wavefront construction method is used to analyze the kinematic characteristics of seismic waves.By improving the design of seismic data acquisition and observation system,imaging quality of fine structures is improved.展开更多
Our analyses of the monthly mean air temperature of meteorological stations show that altitude, global solar radiation and surface effective radiation have a significant impact on air temperature. We set up a physical...Our analyses of the monthly mean air temperature of meteorological stations show that altitude, global solar radiation and surface effective radiation have a significant impact on air temperature. We set up a physically-based empirical model for monthly air temperature simulation. Combined the proposed model with the distributed modeling results of global solar radiation and routine meteorological observation data, we also developed a method for the distributed simulation of monthly air temperatures over rugged terrain. Spatial distribution maps are generated at a resolution of 1 km×1 km for the monthly mean, the monthly mean maximum and the monthly mean minimum air temperatures for the Yellow River Basin. Analysis shows that the simulation results reflect to a considerable extent the macro and local distribution characteristics of air temperature. Cross-validation shows that the proposed model displays good stability with mean absolute bias errors of 0.19°C–0.35°C. Tests carried out on local meteorological station data and case year data show that the model has good spatial and temporal simulation capacity. The proposed model solely uses routine meteorological data and can be applied easily to other regions.展开更多
A model for topographic correction and land surface reflectance estimation for optical remote sensing data in rugged terrian is presented.Considering a directional-directional reflectance that is used for direct solar...A model for topographic correction and land surface reflectance estimation for optical remote sensing data in rugged terrian is presented.Considering a directional-directional reflectance that is used for direct solar irradiance correction and a hemispheric-directional reflectance that is used for atmospheric diffuse irradiance and terrain background reflected irradiance correction respectively,the directional reflectance-based model for topographic effects removing and land surface reflectance calculation is developed by deducing the directional reflectance with topographic effects and using a radiative transfer model.A canopy reflectance simulated by GOMS model and Landsat/TM raw data covering Jiangxi rugged area were taken to validate the performance of the model presented in the paper.The validation results show that the model presented here has a remarkable ability to correct topography and estimate land surface reflectance and also provides a technique method for sequently quantitative remote sensing application in terrain area.展开更多
Two types of RF LDMOS devices, specified for application in the driver stage and output stage of a power amplifier, are designed based on a modified CMOS process. By optimizing the layout and process, the output capac...Two types of RF LDMOS devices, specified for application in the driver stage and output stage of a power amplifier, are designed based on a modified CMOS process. By optimizing the layout and process, the output capacitance per unit of gate width is as low as 225 fF/mm. The driver stage and output stage devices achieve an output power of 44 W with a PAE of 82% and 230 W with a PAE of 72.3%, respectively （P3aB compression） at 1 GHz. Both devices are capable of withstanding extremely severe ruggedness tests without any performance degradation. These tests are 3-5 dB overdrive, 10：1 voltage standing wave ratio mismatch load through all phase angles, and 40% drain overvoltage elevation at a working point of P3aB.展开更多
基金sponsored by the National 863 Project(No.2009AA06Z206)the Self-governed Innovative Project of China University of Petroleum(No.11CX04010A)the Doctoral Fund of National Ministry of Education(No. 20110133120001)
文摘Pre-stack depth migration velocity analysis is one of the key techniques influencing image quality. As for areas with a rugged surface and complex subsurface, conventional prestack depth migration velocity analysis corrects the rugged surface to a known datum or designed surface velocity model on which to perform migration and update the velocity. We propose a rugged surface tomographic velocity inversion method based on angle-domain common image gathers by which the velocity field can be updated directly from the rugged surface without static correction for pre-stack data and improve inversion precision and efficiency. First, we introduce a method to acquire angle-domain common image gathers （ADCIGs） in rugged surface areas and then perform rugged surface tornographic velocity inversion. Tests with model and field data prove the method to be correct and effective.
基金financially supported by the National High Technology Research and Development Program of China(No.2012AA09A20105)the National Science Foundation Network(No.41574127)
文摘We studied finite-element-method-based two-dimensional frequency-domain acoustic FWI under rugged topography conditions. The exponential attenuation boundary condition suitable for rugged topography is proposed to solve the cutoff botmdary problem as well as to consider the requirement of using the same subdivision grid in joint multifrequency inversion. The proposed method introduces the attenuation factor, and by adjusting it, acoustic waves are sufficiently attenuated in the attenuation layer to minimize the cutoff boundary effect. Based on the law of exponential attenuation, expressions for computing the attenuation factor and the thickness of attenuation layers are derived for different frequencies. In multifrequency-domain FWI, the conjugate gradient method is used to solve equations in the Gauss-Newton algorithm and thus minimize the computation cost in calculating the Hessian matrix. In addition, the effect of initial model selection and frequency combination on FWI is analyzed. Examples using numerical simulations and FWI calculations are used to verify the efficiency of the proposed method.
文摘The soft switching operation principle and operation performance of rugged resonant pole (RRP) is given. The applications of RRP in soft switching DC DC converter and soft switching inverter are discussed in detail. RRP can constitute buck boost soft switching DC DC converter and isolated soft switching DC DC converter with the automatic limitation performance of output power. Partial series resonant DC DC converter with RRP can realize the zero voltage/zero current switching of power devices. RR...
基金jointly financial support of the National 973 Project of China(Nos.2014CB239006,2011CB202402)the National Natural Science Foundation of China(Nos.41104069,41274124)+1 种基金the Shandong Natural Science Foundation of China(No.ZR2011DQ016)the Fundamental Research Funds for the Central Universities of China(No.R1401005A)
文摘We present a method based on least-squares reverse time migration with plane-wave encoding （P-LSRTM） for rugged topography. Instead of modifying the wave field before migration, we modify the plane-wave encoding function and fill constant velocity to the area above rugged topography in the model so that P-LSRTM can be directly performed from rugged surface in the way same to shot domain reverse time migration. In order to improve efficiency and reduce I/O （input/output） cost, the dynamic en- coding strategy and hybrid encoding strategy are implemented. Numerical test on SEG rugged topography model show that P-LSRTM can suppress migration artifacts in the migration image, and compensate am- plitude in the middle-deep part efficiently. Without data correction, P-LSRTM can produce a satisfying image of near-surface if we could get an accurate near-surface velocity model. Moreover, the pre-stack P- LSRTM is more robust than conventional RTM in the presence of migration velocity errors.
文摘Due to the influences of local topographical factors and terrain inter-shielding, calculation of direct solar radiation （DSR） quantity of rugged terrain is very complex. Based on digital elevation model （DEM） data and meteorological observations, a distributed model for calculating DSR over rugged terrain is developed. This model gives an all-sided consideration on factors influencing th a resolution of 1 km × 1 km for thDSR. Using the developed model, normals of annual DSR quantity wie Yellow River Basin was generated, with DEM data as the general characterization of terrain. Characteristics of DSR quantity influenced by geographic and topographic factors over rugged terrain were analyzed thoroughly. Results suggest that： influenced by local topographic factors, i.e. azimuth, slope and so on, and annual DSR quantity over mountainous area has a clear spatial difference; annual DSR quantity of sunny slope （or southern slope） of mountains is obviously larger than that of shady slope （or northern slope）. The calculated DSR quantity of the Yellow River Basin is provided in the same way as other kinds of spatial information and can be employed as basic geographic data for relevant studies as well.
文摘In Pakistan,the solar analogue has been addressed but its surface geographical parameterization has given least attention.Inappropriate density of stations and their spatial coverage particularly in difficult peripheral national territories,little or no solar radiation data,non-satisfactory sunshine hours data,and low quality of ground observed cloud cover data create a situation in which the spatial modeling of Extraterrestrial Solar Radiation(ESR) and its ground parameterization got sufficient scope.The Digital Elevation Model (DEM) input into Geographic Information System (GIS) is a compatible tool to demonstrate the spatial distribution of ESR over the rugged terrains of the study domain.For the first time,distributed modeling of ESR is done over the rugged terrains of Pakistan,based on DEM and ArcGIS..Results clearly depict that the complex landforms profoundly disrupt the zonal distribution of ESR in Pakistan.The screening impact of topography is higher on spatial distribution of ESR in winter and considerably low in summer.The combined effect of topography and latitude is obvious.Hence,the model was further testified by plotting Rb (ratio of ESR quantity over rugged terrain against plane surface) against azimuth at different latitudes with different angled slopes.The results clearly support the strong screening effect of rugged terrain through out the country especially in Himalayas,Karakoram and Hindukush (HKH),western border mountains and Balochistan Plateau.This model can be instrumental as baseline geospatial information for scientific investigations in Pakistan,where substantial fraction of national population is living in mountainous regions.
基金Supported by projects of National Natural Science Foundation of China (No. 42074150)National Key R&D Program of China (No. 2017YFC0601305)。
文摘Strong fluctuation of seabed,abrupt variation in depth and dip of seabed bring seismic imaging problems,such as irregular reflection waves,obvious multiple waves,serious lateral wave development,poor imaging on base surface and depression structure,low signal-to-noise ratio of middle and deep layers.In this paper,Gaussian beam migration imaging method is used to analyze the imaging effect of rugged seabed in deep water area,and the ray tracing method of wavefront construction method is used to analyze the kinematic characteristics of seismic waves.By improving the design of seismic data acquisition and observation system,imaging quality of fine structures is improved.
基金Supported by China Meteorological Administration key Project on New Technique Diffusion (Grant No. CMATG2006Z10)Jiangsu Key Laboratory of Meteoro-logical Disasters (Grant No. KLME050102)
文摘Our analyses of the monthly mean air temperature of meteorological stations show that altitude, global solar radiation and surface effective radiation have a significant impact on air temperature. We set up a physically-based empirical model for monthly air temperature simulation. Combined the proposed model with the distributed modeling results of global solar radiation and routine meteorological observation data, we also developed a method for the distributed simulation of monthly air temperatures over rugged terrain. Spatial distribution maps are generated at a resolution of 1 km×1 km for the monthly mean, the monthly mean maximum and the monthly mean minimum air temperatures for the Yellow River Basin. Analysis shows that the simulation results reflect to a considerable extent the macro and local distribution characteristics of air temperature. Cross-validation shows that the proposed model displays good stability with mean absolute bias errors of 0.19°C–0.35°C. Tests carried out on local meteorological station data and case year data show that the model has good spatial and temporal simulation capacity. The proposed model solely uses routine meteorological data and can be applied easily to other regions.
基金the National Natural Science Foundation of China (Grant No.40730525)Knowledge Innovation Engineering Project of Chinese Academy of Sciences (Grant No.KZCX2-YW-313)China's Special Funds for Major State Basic Research Project (Grant No.2007CB714401)
文摘A model for topographic correction and land surface reflectance estimation for optical remote sensing data in rugged terrian is presented.Considering a directional-directional reflectance that is used for direct solar irradiance correction and a hemispheric-directional reflectance that is used for atmospheric diffuse irradiance and terrain background reflected irradiance correction respectively,the directional reflectance-based model for topographic effects removing and land surface reflectance calculation is developed by deducing the directional reflectance with topographic effects and using a radiative transfer model.A canopy reflectance simulated by GOMS model and Landsat/TM raw data covering Jiangxi rugged area were taken to validate the performance of the model presented in the paper.The validation results show that the model presented here has a remarkable ability to correct topography and estimate land surface reflectance and also provides a technique method for sequently quantitative remote sensing application in terrain area.
文摘Two types of RF LDMOS devices, specified for application in the driver stage and output stage of a power amplifier, are designed based on a modified CMOS process. By optimizing the layout and process, the output capacitance per unit of gate width is as low as 225 fF/mm. The driver stage and output stage devices achieve an output power of 44 W with a PAE of 82% and 230 W with a PAE of 72.3%, respectively （P3aB compression） at 1 GHz. Both devices are capable of withstanding extremely severe ruggedness tests without any performance degradation. These tests are 3-5 dB overdrive, 10：1 voltage standing wave ratio mismatch load through all phase angles, and 40% drain overvoltage elevation at a working point of P3aB.
