[Objectives]To provide a reference for the promotion of appropriate row spacing configuration modes for cotton planting in the Bortala Mongol Autonomous Prefecture of Xinjiang.[Methods]Xinluzao 63 was employed as the ...[Objectives]To provide a reference for the promotion of appropriate row spacing configuration modes for cotton planting in the Bortala Mongol Autonomous Prefecture of Xinjiang.[Methods]Xinluzao 63 was employed as the research subject to examine the effects of three different configuration modes:three rows with one film,four rows with one film,and six rows with one film,on the growth and development of cotton,as well as on yield and the amount of residual film in the field.[Results]In comparison to the configuration modes of four rows with one film and six rows with one film,the development process in the row spacing configuration mode of three rows with one film was accelerated by 1-4 d.This configuration mode exhibited variability in several agronomic traits,particularly in plant height,the number of fruiting branches per plant,and the number of leaves per plant,with the observed trend indicating T3>T2>T1.Conversely,the height of the first fruiting branch node displayed an inverse trend.In terms of yield composition,no significant differences were observed in boll weight and yield among various configuration modes.However,T3 exhibited the highest boll weight at 5.68 g and a yield of 462.67 kg/667 m 2.Additionally,significant differences were noted in harvesting density and the number of bolls per plant.T3 demonstrated the lowest harvesting density at 1.11×104 plants/666.7 m 2,the highest number of bolls per plant at 8.63,and the highest boll opening rate at 97.48%.Furthermore,T3 also resulted in the least amount of agricultural film residue during the current season.[Conclusions]Among the three planting configuration modes examined,the low-density planting configuration mode consisting of three rows and one film demonstrated a significant advantage at the individual plant level.This approach yielded results comparable to those of the high density planting configuration mode while also reducing costs.Furthermore,low density planting positively influenced the cotton boll opening rate,leading to a decreased amount of residual film and promoting ecological health within the agricultural land.展开更多
Rice leaf morphology is of great significance in the breeding of an ideal plant type and high photosynthetic efficiency.A forward genetics approach was employed to locate a novel gene,NRL9(NARROW AND ROLLED LEAF 9).NR...Rice leaf morphology is of great significance in the breeding of an ideal plant type and high photosynthetic efficiency.A forward genetics approach was employed to locate a novel gene,NRL9(NARROW AND ROLLED LEAF 9).NRL9 encodes a 20S proteasome β1 subunit and is involved in regulating leaf morphology and grain size.Compared with the wild type(WT),the nrl9 mutant exhibited a significant decrease in leaf width,and a significant increase in leaf rolling index(LRI),while also displaying increased grain length and decreased grain width.展开更多
The declining Ogallala Aquifer beneath the Southern High Plains may necessitate dryland crop production and cotton (Gossypium hirsutum L.) is a well-adapted and potentially profitable alternative crop. The limited gro...The declining Ogallala Aquifer beneath the Southern High Plains may necessitate dryland crop production and cotton (Gossypium hirsutum L.) is a well-adapted and potentially profitable alternative crop. The limited growing season duration of the Texas Panhandle and southwestern Kansas, however, imposes significant production risk due to incomplete boll maturation. Emphasizing earlier boll production that is usually confined to sites on lower fruiting branches may reduce risk, but offsetting high planting densities are needed to maintain desirable lint yield. Our objectives were to quantify planting: 1) row width and 2) in-row spacing effects on growth, yield, and fiber quality of dryland cotton. Field tests of row widths from 0.25 to 0.76 m and plant densities with in-row spacing ranging from 0.075 to 0.15 m were conducted from 1999 to 2005 on a nearly level Pullman clay loam (fine, mixed, superactive, thermic Torrertic Paleustoll) managed in a wheat (Triticum aestivum L.), cotton, fallow (W-Ctn-F) rotation. To expand the basis of comparison, cotton growth and yields were simulated using GOSSYM and long-term (1958-2000) weather records from Bushland, TX, as input for all combinations of 0.38 or 0.76 m row widths and plant spacing of 0.075, 0.10 and 0.15 m. Experimental and computer simulated plant height and harvested boll number increased significantly with increased row spacing and, occasionally, in-row plant spacing. Modeled lint yield for 0.38 m rows decreased by approximately 50% compared with the 582 kg·ha-1 yield for conventional row spacing, which was practically duplicated by field observations in 2001 and 2004. Measured fiber quality occasionally improved with conventional row spacing over ultra-narrow rows, but was unaffected by plant spacing. Because narrow rows and frequent plant spacing did not improve lint yield or fiber quality of dryland cotton, we do not recommend this strategy to overcome a thermally limited growing season.展开更多
Using a split plot design, super high-yielding early rice ＆quot;Zhongjiazao 17＆quot;and ＆quot;Ganxin 203＆quot; and super high-yielding late rice ＆quot;Ganxin 688＆quot; and ＆quot;Wufengy-ouT025＆quot; were taken...Using a split plot design, super high-yielding early rice ＆quot;Zhongjiazao 17＆quot;and ＆quot;Ganxin 203＆quot; and super high-yielding late rice ＆quot;Ganxin 688＆quot; and ＆quot;Wufengy-ouT025＆quot; were taken as materials with planting density the same at 312 000 hil s/hm2, to explore the effects of RS/IS （Ratio of row spacing to intrarow row spacing） on yield, top three leaves morphological features and its relationship of them in 2011 and 2012. The results showed that, whether early or late rice, biomass, accumula-tion and apparent utilizing rate of nitrogen were lower in RS/IS5.0 （40.0 cm ＆#215;8.0 cm） treatment, but yield of rice was higher in RS/IS2.0 （25.0 cm ＆#215;12.8 cm） treatment;grain numbers per spike of rice was more in RS/IS2.8 （30.0 cm＆#215;10.7 cm） treatment, and thousand-grain weight of rice was higher in RS/IS1.3 （20.0 cm＆#215;16.0 cm） treat-ment. For 4 varieties of early or late rice aforementioned, basal angle, opening an-gle and leaf area of 2nd leaf from top were larger in RS/IS5.0 treatment, and basal angle and opening angle were smal er in RS/IS2.0 treatment and leaf area smal er in RS/IS1.3 treatment.展开更多
Mechanical pot-seedling transplanting is an innovatively developed transplanting method that has the potential to replace mechanical carpet-seedling transplanting. However, the initial pot-seedling transplanting machi...Mechanical pot-seedling transplanting is an innovatively developed transplanting method that has the potential to replace mechanical carpet-seedling transplanting. However, the initial pot-seedling transplanting machine lacked optimized density spacing and limited yield potential for japonica rice. Therefore, ascertaining the optimized density by wide-narrow rows and the appropriate transplanting method for yield formation and grain quality of japonica rice is of great importance for high-quality rice production. Field experiments were conducted using two japonica rice cultivars Nanjing 9108 and Nanjing 5055 under three transplanting methods in 2016 and 2017: mechanical pot-seedling transplanting with wide-narrow row(K, average row spacing of 30 cm);equidistant row(D, 33 cm×12 cm);and mechanical carpet-seedling transplanting(T, 30 cm×12.4 cm). In addition, five different density treatments were set in K(K1–K5, from 18.62×10~4 to 28.49×10~4 hills ha^(–1)). The results showed that the highest yield was produced by a planting density of 26.88×104 hills ha^(–1) in mechanical pot-seedling transplanting with wide-narrow row with a greater number of total spikelets that resulted from significantly more panicles per area and slightly more grain number per panicle, as compared with equidistant row, and yield among density in wide-narrow row showed a parabolic trend. Compared with mechanical carpet-seedling transplanting, the treatment of the highest yield increased yield significantly, which was mainly attributed to the larger sink size with improved filled-grain percentage and grain weight, higher harvest index, and increased total dry matter accumulation, especially the larger amount accumulated from heading stage to maturity stage. With the density in wide-narrow row decreasing, processing quality, appearance quality, and nutrition quality were all improved, whereas amylose content and the taste value were decreased. Compared with mechanical carpet-seedling transplanting, mechanical pot-seedling transplanting improved processing quality and nutrition quality, but decreased amylose content and deteriorated appearance quality. These results suggested that mechanical pot-seedling transplanting with wide-narrow row coupling produced a suitable planting density of 26.88×10~4 hills ha^(–1) and may be an alternative approach to improving grain yield and quality for japonica rice.展开更多
Row fixation is a parallel algorithm based on MPI that can be implemented on high performance computer system. It keeps the characteristics of matrices since row-computations are fixed on different nodes. Therefore t...Row fixation is a parallel algorithm based on MPI that can be implemented on high performance computer system. It keeps the characteristics of matrices since row-computations are fixed on different nodes. Therefore the locality of computation is realized effectively and the acceleration ratio is obtained very well for large scale parallel computations such as solving linear equations using Gaussian reduction method, LU decomposition of matrices and m-th power of matrices.展开更多
Objective To observe the clinical efficacy of auricular subcutaneous penetration needling combining with row acupuncture at meridian sinew on prolapse of lumbar intervertebral disc. Methods One hundred and three patie...Objective To observe the clinical efficacy of auricular subcutaneous penetration needling combining with row acupuncture at meridian sinew on prolapse of lumbar intervertebral disc. Methods One hundred and three patients with prolapse of lumbar intervertebral disc were treated with a combined treatment of auricular subcutaneous penetration needling and row acupuncture at meridian sinew. Results Of 103 patients, 46 cases were cured, 33 were markedly effective, 21 effective and 3 ineffective. The total effective rate was 97.1% （100/103）. Conclusion The combined treatment of auricular subcutaneous penetration needling and row acupuncture at meridian sinew has a significant efficacy for the treatment of prolapse of lumbar intervertebral disc.展开更多
One of the main reasons behind reduced cane yield is pathetic method of planting. Planting method and row spacing are the most important yield contributing factors in sugarcane. A field experiment was carried out in o...One of the main reasons behind reduced cane yield is pathetic method of planting. Planting method and row spacing are the most important yield contributing factors in sugarcane. A field experiment was carried out in order to determine quality and yield of sugarcane in various spatial arrangements. Treatments are 180 cm spaced trenches with triple row strips;180 cm spaced trenches with alternate row strips;120 cm spaced trenches with double row strips and 60 cm spaced furrow with single row. Perusal of data revealed that 3.6%, 13.4%, 15%, 15.3% more cane diameter (cm), cane length (cm), stripped cane yield (t·haˉ1</sup>), sugar yield (t·haˉ1</sup>) were obtained from 180 cm spaced trenches with triple row strips as compared to conventional planting method i.e. 60 cm spaced furrows. While the number of millable canes mˉ2</sup>, polarity %, cane juice purity %, cane juice %, commercial cane sugar % and cane sugar recovery % remained non-significant by different planting techniques.展开更多
[Objective] The aim was to explore high-yielding cultivation techniques for forage sweet sorghum. [Method[ The effects of planting density and row spacing on plant productivity and grass yield of forage sweet sorghum ...[Objective] The aim was to explore high-yielding cultivation techniques for forage sweet sorghum. [Method[ The effects of planting density and row spacing on plant productivity and grass yield of forage sweet sorghum （Sorghum bicolor （L.） Moench） were compared using split-plot design and LSD method of IBMSPSSStatis- ticsv22. [Result]The planting density and row spacing had important influence on the plant productivity and yield of forage sweet sorghum. The optimum planting density- row spacing combination for plant productivity of forage sweet sorghum was A1B,, i. e., planting density of 75 000 plants/hm2 and row spacing of 40 cm, and the opti- mum combination for yield of forage sweet sorghum was A2B,, i.e., planting density of 225 000 plants/hm2 and row spacing of 40 cm. [Conclusion] This study will pro- vide theoretical basis and technical support for the production practice of forage sweet sorghum.展开更多
In monoculture, crop failure due to biotic or abiotic causes can result in partial or total output failure. The yield, socio-economic, and environmental effects of intercropping on the farmer and the environment as a ...In monoculture, crop failure due to biotic or abiotic causes can result in partial or total output failure. The yield, socio-economic, and environmental effects of intercropping on the farmer and the environment as a whole have not received much attention. There is a dearth of knowledge on the productivity of maize-groundnut intercrops in Ghana regarding the relative timing of planting and spatial arrangement of component crops. Therefore, the objective of the study was to determine the effects of spatial row arrangement and the time of planting intercrops on the productivity of groundnut under maize-groundnut intercropping. The 5 × 3 factorial field experiment was undertaken at the Miminaso community in the Ejura-Sekyedumase municipality of the Ashanti Region of Ghana during the 2020 cropping seasons. Treatments were evaluated in a Randomized Complete Block Design (RCBD) with three replicates. The levels of row arrangement of intercrops were: one row of maize and one row of groundnut (1M1G), one row of maize and two rows of groundnut (1M2G), two rows of maize and one row of groundnut (2M1G), two rows of maize and two rows of groundnut (2M2G), sole maize and sole groundnut (M/G). The levels of time of introducing groundnut included simultaneous planting of intercrops (0 WAP), planting groundnut one week after planting maize (1 WAP) and planting groundnut two weeks after planting maize (2 WAP). There were significant (P 0.05) treatment interactions for pod and seed yields of groundnut throughout the study. The highest groundnut pod yields of 1815.00 kg/ha and 2359.00 kg/ha were recorded by the 0WAP × 1M2G treatment in the major and minor seasons of 2020, respectively, while the highest groundnut seed yields of 741.00 kg/ha and 726.00 kg/ha were recorded in the major and minor rainy seasons of 2020 by 1WAP × G and 0WAP × G treatments, respectively. The highest seed yields of groundnut (404 kg/ha and 637 kg/ha for major and minor rainy seasons, respectively) were produced by 1WAP × 2M2G.展开更多
Experiments were located at Lower Niger River Basin Development Authority, Ejiba and Horticultural Section College of Agriculture, Kabba in 2014 cropping season to investigate the effect of different spacing and urea ...Experiments were located at Lower Niger River Basin Development Authority, Ejiba and Horticultural Section College of Agriculture, Kabba in 2014 cropping season to investigate the effect of different spacing and urea application rates on fruit nutrient composition, growth and fruit yield of tomato in derived savanna vegetation of Nigeria. Field experiments were arranged in a randomized complete block design in factorial fashion with three replications. The row spacing were 75 × 40 cm (33,333 plant·ha-1, 75 × 50 cm (26,666 plant·ha-1) and 75 × 60 cm (22,222 plant·ha-1) while the urea rates comprised control (0 kg urea·ha-1), 54.3 and 108.6 kg urea·ha-1. Growth and yield parameters taken were as follows: average plant height, stem girth, leaf area (m2) and yield per land area. Data were collected from ten randomly selected plants in each plot. The data were statistically analyzed using GENSTAT. The analysis of variance (ANOVA) was performed to find out the significance of variation among the treatments while the significant difference between mean treatments was separated using least significance Difference at 5% level of probability. The result obtained from this study indicated that urea application and spacing affected significantly growth parameters of tomato and yield per land area. It could be concluded that there was a significant increase in plant height, number of leaves, number of fruits per plant and final fruit weight of tomato as a result of urea fertilizer application at the rate of 108.6 kg urea/ha. However, this was not significantly better than plots with urea application at 54.8 kg/ha in both Ejiba and Kabba. Row spacing of 75 × 50 cm showed better performance in number of fruit and fruit yield per plots. Farmers in Ejiba and Kabba should apply urea at the rate of 54.8 kg per hectare and plant the crop at a row spacing of 75 × 50 cm for optimum yield and for a more profitable production of tomato.展开更多
In view of the problems of completely depending on rain, low and unstable yield and complicated planting of dry land foxtail millet, the light simplified cultivation techniques of wide row and double ridge with filmin...In view of the problems of completely depending on rain, low and unstable yield and complicated planting of dry land foxtail millet, the light simplified cultivation techniques of wide row and double ridge with filming, fertilizing and sowing on one for foxtail millet was formed through the integration of plastic film mulching technology and mechanized production technology by Institute of Millet crops of Hebei Academy of Agriculture and Forestry Sciences, and the techniques were introduced from the key technologies of pre-sowing preparation, sowing, supporting equipment, field management, harvesting, plastic film recycling.展开更多
Maize is widely planted throughout the world and has the highest yield of all the cereal crops. The arid region of North- west China has become the largest base for seed-maize production, but water shortage is the bot...Maize is widely planted throughout the world and has the highest yield of all the cereal crops. The arid region of North- west China has become the largest base for seed-maize production, but water shortage is the bottleneck for its long-term sustainability. Investigating the transpiration of seed-maize plants will offer valuable information for suitable planting and irrigation strategies in this arid area. In this study, stem flow was measured using a heat balance method under alternate furrow irrigation and double-row ridge planting. Meteorological factors, soil water content （e）, soil temperature （Ts） and leaf area （LA） were also monitored during 2012 and 2013. The diurnal stem flow and seasonal dynamics of maize plants in the zones of south side female parent （SFP）, north side female parent （NFP） and male parent （MP） were investigated. The order of stem flow rate was： SFP〉MP〉NFP. The relationships between stem flow and influential factors during three growth stages at different time scales were analyzed. On an hourly scale, solar radiation （Rs） was the main driving factor of stem flow. The influence of air temperature （Ta） during the maturity stage was significantly higher than in other periods. On a daily scale, Rs was the main driving factor of stem flow during the heading stage. During the filling growth stage, the main driving factor of NFP and MP stem flow was RH and Ts, respectively. However, during the maturity stage, the environ- mental factors had no significant influence on seed-maize stem flow. For different seed-maize plants, the main influential factors were different in each of the three growing seasons. Therefore, we identified them to accurately model the FP and MP stem flow and applied precision irrigation under alternate partial root-zone furrow irrigation to analyze major factors affecting stem flow in different scales.展开更多
Let Bn be the set of all n×n Boolean Matrices; R（A） denote the row space of A∈Bn, ｜R（A）｜ denote the cardinality of R（A）, m, n, k, l, t, i, γi be positive integers, Si, λi be non negative integers. In t...Let Bn be the set of all n×n Boolean Matrices; R（A） denote the row space of A∈Bn, ｜R（A）｜ denote the cardinality of R（A）, m, n, k, l, t, i, γi be positive integers, Si, λi be non negative integers. In this paper, we prove the following two results：（1）Let n≥13,n-3≥k〉Sl,Si＋〉Si,i=1,2…,l-1.if k＋l≤n,then for any m=2^k＋2^S1-l＋…＋2^S1,there exists A∈Bn,such that ｜R（A）｜=m.（2）Let n≥13,n-3≥k〉Sn-k-1〉Sn-k-2〉…S1〉λt〉λt-1〉…〉λ1,2≤t≤n-k.If exist γi（k＋1≤γi≤n-1,i=1,2…,t-1）γi〈γi＋1 and λt-λt-1≤k-Sn-γ1,λt-i-λt-i-1≤Sn-γi-Sn-γii＋1,i=1,2…,t-2,then for any m=2^k＋2^Sn-k-1＋2^Sn-k-1＋2^Sn-k-2＋…＋2^S1＋2^λt＋2^λt-1…＋2^λ1,there exists A∈Bn,as such that ｜R（A）｜=m.展开更多
Emergence of grasses late in the season has become a problem in glyphosate-resistant (GR) soybean production in the southern US. A 3-yr field study was conducted from 2011 to 2013 at Stoneville, MS to determine effica...Emergence of grasses late in the season has become a problem in glyphosate-resistant (GR) soybean production in the southern US. A 3-yr field study was conducted from 2011 to 2013 at Stoneville, MS to determine efficacy of post-harvest and pyroxasulfone-based in-crop herbicides on late-season grasses and yield in twin-row glyphosate-resistant soybean. Experiments were conducted in a split-plot arrangement of treatments in a randomized complete block design with fall herbicides (with and without pendimethalin at 1.12 kg ai ha-1 and paraquatat 0.84 kg ai ha-1) as main plots and in-crop herbicides as subplots with four replications. The six in-crop herbicide programs were: glyphosate applied early postemergence (EPOST) at 0.84 kg·aeha-1 followed by (fb) glyphosate late postemergence (LPOST) at 0.84 kg·ha-1 with and without pyroxasulfone preemergence (PRE) applied at 0.18 kg ai ha-1, pyroxasulfone PRE fb glyphosate at 0.84 kg·ha-1 LPOST or glyphosate at 0.84 kg·ha-1 + S-metolachlor at 1.68 kg ai ha-1 EPOST, pyroxasulfone PRE fb S-meto- lachlor at 1.12 kg·ha-1 + fomesafen at 0.27 kg ai ha-1 EPOST fb clethodim at 0.14 kg ai ha-1, and a no-herbicide control. Browntop millet, Digitaria spp., and junglerice densities at 2 weeks after LPOST, grass weed dry biomass at harvest, and soybean yield were similar regardless of post- harvest herbicides in all three years. At 2 weeks after LPOST, browntop millet, Digitaria spp. and junglerice densities were greatly reduced in all five in-crop herbicide treatments compared with no herbicide plot in all three years. Grass weed dry biomass in no-herbicide plots was 3346, 6136, and 6916 kg·ha-1 in 2011, 2012, and 2013, respectively and the five herbicide treatments reduced grass weed dry biomass by at least 87%, 84%, and 99% in 2011, 2012, and 2013, respectively. Soybean yield was higher with all five in-crop herbicide treatments compared to no herbicide control in all three years. These results indicate that browntop millet, Digitaria spp., and junglerice infestations can be reduced with pyroxasulfone-based in-crop herbicide programs in twin-row GR soybean.展开更多
Objective To explore the effect of meridian sinew row needling combined with dermal needling on spasticity of post-stroke patients with upper limb hemiparalysis. Methods Four hundred and eighty-eight cases of post-str...Objective To explore the effect of meridian sinew row needling combined with dermal needling on spasticity of post-stroke patients with upper limb hemiparalysis. Methods Four hundred and eighty-eight cases of post-stroke patients with upper limb spasticity were randomly divided into two groups at the ratio of 1： 1, the group of meridian sinew row needling combined with dermal needling （group A, 244 cases） and western medication group （group B, 244 cases）. Coupled with rehabilitation, the patients in the group A were given meridian sinew row needling combined with dermal needling where five shu points were specifically selected, and three yang meridians of the hand were treated with acupuncture with muscle region, and three yin meridians of the hand were treated with dermal needles; the patients in the group B was treated with conventional western medication with piracetam injection and cerebroprotein hydrolysate included. Clinical efficacy was evaluated among patients in the two groups after three weeks of continuous treatment, and upper limb spasticity and motor functions were observed through modified Asworth Scale and FugI-Meyer Assessment Scale （FMA） before and after treatment. Results For Asworth Scale, group A was significantly superior to group B （3.04 ± 1.29 vs 3.88 ± 1.54, P〈0.05）; for FMA scale, group A was also significantly superior to group B （48.67± 15.64 vs 42.96±14.72, P〈0.05）; mitigations of motor status of upper limb joints in group A, such as remission of shoulder adduction （90.5%）, pronation of forearm （70.7%）, elbow joint flexion （73.1%）, wrist joint flexion （80.9%） and finger flexion （88.1%）, were superior to those of group B （70.0%, 60.0%, 61.9%, 57.4%, 63.2%, all P〈0.05）. Conclusion Good clinical efficacy of the treatment with combined with dermal needling on spasticity of post-stroke patients with upper limb hemiparalysis is achieved.展开更多
基金Supported by China Agriculture(Cotton)Research System(CARS-15-46)Intellectual Aid Xinjiang Innovation and Expansion Talent Program of Xinjiang Uygur Autonomous Region(2024500207).
文摘[Objectives]To provide a reference for the promotion of appropriate row spacing configuration modes for cotton planting in the Bortala Mongol Autonomous Prefecture of Xinjiang.[Methods]Xinluzao 63 was employed as the research subject to examine the effects of three different configuration modes:three rows with one film,four rows with one film,and six rows with one film,on the growth and development of cotton,as well as on yield and the amount of residual film in the field.[Results]In comparison to the configuration modes of four rows with one film and six rows with one film,the development process in the row spacing configuration mode of three rows with one film was accelerated by 1-4 d.This configuration mode exhibited variability in several agronomic traits,particularly in plant height,the number of fruiting branches per plant,and the number of leaves per plant,with the observed trend indicating T3>T2>T1.Conversely,the height of the first fruiting branch node displayed an inverse trend.In terms of yield composition,no significant differences were observed in boll weight and yield among various configuration modes.However,T3 exhibited the highest boll weight at 5.68 g and a yield of 462.67 kg/667 m 2.Additionally,significant differences were noted in harvesting density and the number of bolls per plant.T3 demonstrated the lowest harvesting density at 1.11×104 plants/666.7 m 2,the highest number of bolls per plant at 8.63,and the highest boll opening rate at 97.48%.Furthermore,T3 also resulted in the least amount of agricultural film residue during the current season.[Conclusions]Among the three planting configuration modes examined,the low-density planting configuration mode consisting of three rows and one film demonstrated a significant advantage at the individual plant level.This approach yielded results comparable to those of the high density planting configuration mode while also reducing costs.Furthermore,low density planting positively influenced the cotton boll opening rate,leading to a decreased amount of residual film and promoting ecological health within the agricultural land.
基金supported by the National Major Science and Technology Program on New Genetically Modified Organism Variety Breeding,China(Grant No.2016ZX08001-001).
文摘Rice leaf morphology is of great significance in the breeding of an ideal plant type and high photosynthetic efficiency.A forward genetics approach was employed to locate a novel gene,NRL9(NARROW AND ROLLED LEAF 9).NRL9 encodes a 20S proteasome β1 subunit and is involved in regulating leaf morphology and grain size.Compared with the wild type(WT),the nrl9 mutant exhibited a significant decrease in leaf width,and a significant increase in leaf rolling index(LRI),while also displaying increased grain length and decreased grain width.
文摘The declining Ogallala Aquifer beneath the Southern High Plains may necessitate dryland crop production and cotton (Gossypium hirsutum L.) is a well-adapted and potentially profitable alternative crop. The limited growing season duration of the Texas Panhandle and southwestern Kansas, however, imposes significant production risk due to incomplete boll maturation. Emphasizing earlier boll production that is usually confined to sites on lower fruiting branches may reduce risk, but offsetting high planting densities are needed to maintain desirable lint yield. Our objectives were to quantify planting: 1) row width and 2) in-row spacing effects on growth, yield, and fiber quality of dryland cotton. Field tests of row widths from 0.25 to 0.76 m and plant densities with in-row spacing ranging from 0.075 to 0.15 m were conducted from 1999 to 2005 on a nearly level Pullman clay loam (fine, mixed, superactive, thermic Torrertic Paleustoll) managed in a wheat (Triticum aestivum L.), cotton, fallow (W-Ctn-F) rotation. To expand the basis of comparison, cotton growth and yields were simulated using GOSSYM and long-term (1958-2000) weather records from Bushland, TX, as input for all combinations of 0.38 or 0.76 m row widths and plant spacing of 0.075, 0.10 and 0.15 m. Experimental and computer simulated plant height and harvested boll number increased significantly with increased row spacing and, occasionally, in-row plant spacing. Modeled lint yield for 0.38 m rows decreased by approximately 50% compared with the 582 kg·ha-1 yield for conventional row spacing, which was practically duplicated by field observations in 2001 and 2004. Measured fiber quality occasionally improved with conventional row spacing over ultra-narrow rows, but was unaffected by plant spacing. Because narrow rows and frequent plant spacing did not improve lint yield or fiber quality of dryland cotton, we do not recommend this strategy to overcome a thermally limited growing season.
基金Supported by National Key Technology Research and Development Program of China(2012BAD15B03)the Youth Innovation Fund of Jiangxi Academy of Agricultural Sciences(2010-CQN004)~~
文摘Using a split plot design, super high-yielding early rice ＆quot;Zhongjiazao 17＆quot;and ＆quot;Ganxin 203＆quot; and super high-yielding late rice ＆quot;Ganxin 688＆quot; and ＆quot;Wufengy-ouT025＆quot; were taken as materials with planting density the same at 312 000 hil s/hm2, to explore the effects of RS/IS （Ratio of row spacing to intrarow row spacing） on yield, top three leaves morphological features and its relationship of them in 2011 and 2012. The results showed that, whether early or late rice, biomass, accumula-tion and apparent utilizing rate of nitrogen were lower in RS/IS5.0 （40.0 cm ＆#215;8.0 cm） treatment, but yield of rice was higher in RS/IS2.0 （25.0 cm ＆#215;12.8 cm） treatment;grain numbers per spike of rice was more in RS/IS2.8 （30.0 cm＆#215;10.7 cm） treatment, and thousand-grain weight of rice was higher in RS/IS1.3 （20.0 cm＆#215;16.0 cm） treat-ment. For 4 varieties of early or late rice aforementioned, basal angle, opening an-gle and leaf area of 2nd leaf from top were larger in RS/IS5.0 treatment, and basal angle and opening angle were smal er in RS/IS2.0 treatment and leaf area smal er in RS/IS1.3 treatment.
基金funded by the National Key Research Program of China(2016YFD0300503)the Key Research Program of Jiangsu Province,China(BE2016344 and BE2018355)the Project Funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions,China。
文摘Mechanical pot-seedling transplanting is an innovatively developed transplanting method that has the potential to replace mechanical carpet-seedling transplanting. However, the initial pot-seedling transplanting machine lacked optimized density spacing and limited yield potential for japonica rice. Therefore, ascertaining the optimized density by wide-narrow rows and the appropriate transplanting method for yield formation and grain quality of japonica rice is of great importance for high-quality rice production. Field experiments were conducted using two japonica rice cultivars Nanjing 9108 and Nanjing 5055 under three transplanting methods in 2016 and 2017: mechanical pot-seedling transplanting with wide-narrow row(K, average row spacing of 30 cm);equidistant row(D, 33 cm×12 cm);and mechanical carpet-seedling transplanting(T, 30 cm×12.4 cm). In addition, five different density treatments were set in K(K1–K5, from 18.62×10~4 to 28.49×10~4 hills ha^(–1)). The results showed that the highest yield was produced by a planting density of 26.88×104 hills ha^(–1) in mechanical pot-seedling transplanting with wide-narrow row with a greater number of total spikelets that resulted from significantly more panicles per area and slightly more grain number per panicle, as compared with equidistant row, and yield among density in wide-narrow row showed a parabolic trend. Compared with mechanical carpet-seedling transplanting, the treatment of the highest yield increased yield significantly, which was mainly attributed to the larger sink size with improved filled-grain percentage and grain weight, higher harvest index, and increased total dry matter accumulation, especially the larger amount accumulated from heading stage to maturity stage. With the density in wide-narrow row decreasing, processing quality, appearance quality, and nutrition quality were all improved, whereas amylose content and the taste value were decreased. Compared with mechanical carpet-seedling transplanting, mechanical pot-seedling transplanting improved processing quality and nutrition quality, but decreased amylose content and deteriorated appearance quality. These results suggested that mechanical pot-seedling transplanting with wide-narrow row coupling produced a suitable planting density of 26.88×10~4 hills ha^(–1) and may be an alternative approach to improving grain yield and quality for japonica rice.
文摘Row fixation is a parallel algorithm based on MPI that can be implemented on high performance computer system. It keeps the characteristics of matrices since row-computations are fixed on different nodes. Therefore the locality of computation is realized effectively and the acceleration ratio is obtained very well for large scale parallel computations such as solving linear equations using Gaussian reduction method, LU decomposition of matrices and m-th power of matrices.
文摘Objective To observe the clinical efficacy of auricular subcutaneous penetration needling combining with row acupuncture at meridian sinew on prolapse of lumbar intervertebral disc. Methods One hundred and three patients with prolapse of lumbar intervertebral disc were treated with a combined treatment of auricular subcutaneous penetration needling and row acupuncture at meridian sinew. Results Of 103 patients, 46 cases were cured, 33 were markedly effective, 21 effective and 3 ineffective. The total effective rate was 97.1% （100/103）. Conclusion The combined treatment of auricular subcutaneous penetration needling and row acupuncture at meridian sinew has a significant efficacy for the treatment of prolapse of lumbar intervertebral disc.
文摘One of the main reasons behind reduced cane yield is pathetic method of planting. Planting method and row spacing are the most important yield contributing factors in sugarcane. A field experiment was carried out in order to determine quality and yield of sugarcane in various spatial arrangements. Treatments are 180 cm spaced trenches with triple row strips;180 cm spaced trenches with alternate row strips;120 cm spaced trenches with double row strips and 60 cm spaced furrow with single row. Perusal of data revealed that 3.6%, 13.4%, 15%, 15.3% more cane diameter (cm), cane length (cm), stripped cane yield (t·haˉ1</sup>), sugar yield (t·haˉ1</sup>) were obtained from 180 cm spaced trenches with triple row strips as compared to conventional planting method i.e. 60 cm spaced furrows. While the number of millable canes mˉ2</sup>, polarity %, cane juice purity %, cane juice %, commercial cane sugar % and cane sugar recovery % remained non-significant by different planting techniques.
文摘[Objective] The aim was to explore high-yielding cultivation techniques for forage sweet sorghum. [Method[ The effects of planting density and row spacing on plant productivity and grass yield of forage sweet sorghum （Sorghum bicolor （L.） Moench） were compared using split-plot design and LSD method of IBMSPSSStatis- ticsv22. [Result]The planting density and row spacing had important influence on the plant productivity and yield of forage sweet sorghum. The optimum planting density- row spacing combination for plant productivity of forage sweet sorghum was A1B,, i. e., planting density of 75 000 plants/hm2 and row spacing of 40 cm, and the opti- mum combination for yield of forage sweet sorghum was A2B,, i.e., planting density of 225 000 plants/hm2 and row spacing of 40 cm. [Conclusion] This study will pro- vide theoretical basis and technical support for the production practice of forage sweet sorghum.
文摘In monoculture, crop failure due to biotic or abiotic causes can result in partial or total output failure. The yield, socio-economic, and environmental effects of intercropping on the farmer and the environment as a whole have not received much attention. There is a dearth of knowledge on the productivity of maize-groundnut intercrops in Ghana regarding the relative timing of planting and spatial arrangement of component crops. Therefore, the objective of the study was to determine the effects of spatial row arrangement and the time of planting intercrops on the productivity of groundnut under maize-groundnut intercropping. The 5 × 3 factorial field experiment was undertaken at the Miminaso community in the Ejura-Sekyedumase municipality of the Ashanti Region of Ghana during the 2020 cropping seasons. Treatments were evaluated in a Randomized Complete Block Design (RCBD) with three replicates. The levels of row arrangement of intercrops were: one row of maize and one row of groundnut (1M1G), one row of maize and two rows of groundnut (1M2G), two rows of maize and one row of groundnut (2M1G), two rows of maize and two rows of groundnut (2M2G), sole maize and sole groundnut (M/G). The levels of time of introducing groundnut included simultaneous planting of intercrops (0 WAP), planting groundnut one week after planting maize (1 WAP) and planting groundnut two weeks after planting maize (2 WAP). There were significant (P 0.05) treatment interactions for pod and seed yields of groundnut throughout the study. The highest groundnut pod yields of 1815.00 kg/ha and 2359.00 kg/ha were recorded by the 0WAP × 1M2G treatment in the major and minor seasons of 2020, respectively, while the highest groundnut seed yields of 741.00 kg/ha and 726.00 kg/ha were recorded in the major and minor rainy seasons of 2020 by 1WAP × G and 0WAP × G treatments, respectively. The highest seed yields of groundnut (404 kg/ha and 637 kg/ha for major and minor rainy seasons, respectively) were produced by 1WAP × 2M2G.
文摘Experiments were located at Lower Niger River Basin Development Authority, Ejiba and Horticultural Section College of Agriculture, Kabba in 2014 cropping season to investigate the effect of different spacing and urea application rates on fruit nutrient composition, growth and fruit yield of tomato in derived savanna vegetation of Nigeria. Field experiments were arranged in a randomized complete block design in factorial fashion with three replications. The row spacing were 75 × 40 cm (33,333 plant·ha-1, 75 × 50 cm (26,666 plant·ha-1) and 75 × 60 cm (22,222 plant·ha-1) while the urea rates comprised control (0 kg urea·ha-1), 54.3 and 108.6 kg urea·ha-1. Growth and yield parameters taken were as follows: average plant height, stem girth, leaf area (m2) and yield per land area. Data were collected from ten randomly selected plants in each plot. The data were statistically analyzed using GENSTAT. The analysis of variance (ANOVA) was performed to find out the significance of variation among the treatments while the significant difference between mean treatments was separated using least significance Difference at 5% level of probability. The result obtained from this study indicated that urea application and spacing affected significantly growth parameters of tomato and yield per land area. It could be concluded that there was a significant increase in plant height, number of leaves, number of fruits per plant and final fruit weight of tomato as a result of urea fertilizer application at the rate of 108.6 kg urea/ha. However, this was not significantly better than plots with urea application at 54.8 kg/ha in both Ejiba and Kabba. Row spacing of 75 × 50 cm showed better performance in number of fruit and fruit yield per plots. Farmers in Ejiba and Kabba should apply urea at the rate of 54.8 kg per hectare and plant the crop at a row spacing of 75 × 50 cm for optimum yield and for a more profitable production of tomato.
基金Supported by the National Key Technology R&D Program(2014BAD07B01-02)the Science and Technology Demonstration Project of Bohai Granary in Hebei Provincethe Special Fund for Agro-scientific Research in Public Interest(201303133-1-6)~~
文摘In view of the problems of completely depending on rain, low and unstable yield and complicated planting of dry land foxtail millet, the light simplified cultivation techniques of wide row and double ridge with filming, fertilizing and sowing on one for foxtail millet was formed through the integration of plastic film mulching technology and mechanized production technology by Institute of Millet crops of Hebei Academy of Agriculture and Forestry Sciences, and the techniques were introduced from the key technologies of pre-sowing preparation, sowing, supporting equipment, field management, harvesting, plastic film recycling.
基金grants from the National Natural Science Foundation of China (51222905, 51321001, 51439006)the National High-Tech R&D Program of China (863 Program, 2011AA100505)+1 种基金the Ministry of Water Resources of China (201201003)the Program for New Century Excellent Talents in University, Ministry of Education, China (NCET11-0479)
文摘Maize is widely planted throughout the world and has the highest yield of all the cereal crops. The arid region of North- west China has become the largest base for seed-maize production, but water shortage is the bottleneck for its long-term sustainability. Investigating the transpiration of seed-maize plants will offer valuable information for suitable planting and irrigation strategies in this arid area. In this study, stem flow was measured using a heat balance method under alternate furrow irrigation and double-row ridge planting. Meteorological factors, soil water content （e）, soil temperature （Ts） and leaf area （LA） were also monitored during 2012 and 2013. The diurnal stem flow and seasonal dynamics of maize plants in the zones of south side female parent （SFP）, north side female parent （NFP） and male parent （MP） were investigated. The order of stem flow rate was： SFP〉MP〉NFP. The relationships between stem flow and influential factors during three growth stages at different time scales were analyzed. On an hourly scale, solar radiation （Rs） was the main driving factor of stem flow. The influence of air temperature （Ta） during the maturity stage was significantly higher than in other periods. On a daily scale, Rs was the main driving factor of stem flow during the heading stage. During the filling growth stage, the main driving factor of NFP and MP stem flow was RH and Ts, respectively. However, during the maturity stage, the environ- mental factors had no significant influence on seed-maize stem flow. For different seed-maize plants, the main influential factors were different in each of the three growing seasons. Therefore, we identified them to accurately model the FP and MP stem flow and applied precision irrigation under alternate partial root-zone furrow irrigation to analyze major factors affecting stem flow in different scales.
基金Foundation item： Supported by the Guangdong Provincial Natural Science Foundation of China（06029035）
文摘Let Bn be the set of all n×n Boolean Matrices; R（A） denote the row space of A∈Bn, ｜R（A）｜ denote the cardinality of R（A）, m, n, k, l, t, i, γi be positive integers, Si, λi be non negative integers. In this paper, we prove the following two results：（1）Let n≥13,n-3≥k〉Sl,Si＋〉Si,i=1,2…,l-1.if k＋l≤n,then for any m=2^k＋2^S1-l＋…＋2^S1,there exists A∈Bn,such that ｜R（A）｜=m.（2）Let n≥13,n-3≥k〉Sn-k-1〉Sn-k-2〉…S1〉λt〉λt-1〉…〉λ1,2≤t≤n-k.If exist γi（k＋1≤γi≤n-1,i=1,2…,t-1）γi〈γi＋1 and λt-λt-1≤k-Sn-γ1,λt-i-λt-i-1≤Sn-γi-Sn-γii＋1,i=1,2…,t-2,then for any m=2^k＋2^Sn-k-1＋2^Sn-k-1＋2^Sn-k-2＋…＋2^S1＋2^λt＋2^λt-1…＋2^λ1,there exists A∈Bn,as such that ｜R（A）｜=m.
文摘Emergence of grasses late in the season has become a problem in glyphosate-resistant (GR) soybean production in the southern US. A 3-yr field study was conducted from 2011 to 2013 at Stoneville, MS to determine efficacy of post-harvest and pyroxasulfone-based in-crop herbicides on late-season grasses and yield in twin-row glyphosate-resistant soybean. Experiments were conducted in a split-plot arrangement of treatments in a randomized complete block design with fall herbicides (with and without pendimethalin at 1.12 kg ai ha-1 and paraquatat 0.84 kg ai ha-1) as main plots and in-crop herbicides as subplots with four replications. The six in-crop herbicide programs were: glyphosate applied early postemergence (EPOST) at 0.84 kg·aeha-1 followed by (fb) glyphosate late postemergence (LPOST) at 0.84 kg·ha-1 with and without pyroxasulfone preemergence (PRE) applied at 0.18 kg ai ha-1, pyroxasulfone PRE fb glyphosate at 0.84 kg·ha-1 LPOST or glyphosate at 0.84 kg·ha-1 + S-metolachlor at 1.68 kg ai ha-1 EPOST, pyroxasulfone PRE fb S-meto- lachlor at 1.12 kg·ha-1 + fomesafen at 0.27 kg ai ha-1 EPOST fb clethodim at 0.14 kg ai ha-1, and a no-herbicide control. Browntop millet, Digitaria spp., and junglerice densities at 2 weeks after LPOST, grass weed dry biomass at harvest, and soybean yield were similar regardless of post- harvest herbicides in all three years. At 2 weeks after LPOST, browntop millet, Digitaria spp. and junglerice densities were greatly reduced in all five in-crop herbicide treatments compared with no herbicide plot in all three years. Grass weed dry biomass in no-herbicide plots was 3346, 6136, and 6916 kg·ha-1 in 2011, 2012, and 2013, respectively and the five herbicide treatments reduced grass weed dry biomass by at least 87%, 84%, and 99% in 2011, 2012, and 2013, respectively. Soybean yield was higher with all five in-crop herbicide treatments compared to no herbicide control in all three years. These results indicate that browntop millet, Digitaria spp., and junglerice infestations can be reduced with pyroxasulfone-based in-crop herbicide programs in twin-row GR soybean.
基金Supported by Hebei Administration of Traditional Chinese Medicine(2009180)
文摘Objective To explore the effect of meridian sinew row needling combined with dermal needling on spasticity of post-stroke patients with upper limb hemiparalysis. Methods Four hundred and eighty-eight cases of post-stroke patients with upper limb spasticity were randomly divided into two groups at the ratio of 1： 1, the group of meridian sinew row needling combined with dermal needling （group A, 244 cases） and western medication group （group B, 244 cases）. Coupled with rehabilitation, the patients in the group A were given meridian sinew row needling combined with dermal needling where five shu points were specifically selected, and three yang meridians of the hand were treated with acupuncture with muscle region, and three yin meridians of the hand were treated with dermal needles; the patients in the group B was treated with conventional western medication with piracetam injection and cerebroprotein hydrolysate included. Clinical efficacy was evaluated among patients in the two groups after three weeks of continuous treatment, and upper limb spasticity and motor functions were observed through modified Asworth Scale and FugI-Meyer Assessment Scale （FMA） before and after treatment. Results For Asworth Scale, group A was significantly superior to group B （3.04 ± 1.29 vs 3.88 ± 1.54, P〈0.05）; for FMA scale, group A was also significantly superior to group B （48.67± 15.64 vs 42.96±14.72, P〈0.05）; mitigations of motor status of upper limb joints in group A, such as remission of shoulder adduction （90.5%）, pronation of forearm （70.7%）, elbow joint flexion （73.1%）, wrist joint flexion （80.9%） and finger flexion （88.1%）, were superior to those of group B （70.0%, 60.0%, 61.9%, 57.4%, 63.2%, all P〈0.05）. Conclusion Good clinical efficacy of the treatment with combined with dermal needling on spasticity of post-stroke patients with upper limb hemiparalysis is achieved.
