This paper addresses the challenges of insufficient navigation accuracy,low path-planning efficiency,and poor environmental adaptability faced by deep space rovers in complex extraterrestrial environments(e.g.,the Moo...This paper addresses the challenges of insufficient navigation accuracy,low path-planning efficiency,and poor environmental adaptability faced by deep space rovers in complex extraterrestrial environments(e.g.,the Moon and Mars).A novel autonomous navigation scheme is proposed that integrates laser Doppler velocimetry(LDV)with star trackers(ST)and inertial navigation system(INS).The scheme suppresses slip errors from wheel odometry through non-contact,high-precision laser speed measurement(accuracy better than 0.1%).By deeply fusing multi-source data via a Kalman filter algorithm,high-precision positioning is realized under extreme extraterrestrial conditions such as weak illumination and dust coverage.This solution features high accuracy,non-contact measurement,and anti-interference capabilities,significantly improving the navigation accuracy and autonomy of deep space rovers in complex environments.展开更多
On lunar exploration missions, the rovers which can move and explore directly are considered by various agency like NASA （National Aeronautics and Space Administration）, JAXA （Japan Aerospace Exploration Agency）, ...On lunar exploration missions, the rovers which can move and explore directly are considered by various agency like NASA （National Aeronautics and Space Administration）, JAXA （Japan Aerospace Exploration Agency）, ESA （European Space Agency）. Lunar rovers are required to move on rough terrains such as craters and rear cliffs where it is scientifically very important to explore. However, there is a problem that the rovers have possibility of stack because of the lunar surface is covered with loose soil named Regolith. Therefore, this paper investigates a mechanism of kinetic behavior between the wheels of the exploration rovers and loose soil. And then, this paper proposed a flexible wheel to solve like that problems. The flexible wheel has the surface which can be changed flexibly toward rough terrain. Running experiments on loose soil which imitated regolith were carried out to observe the traversability of the flexible wheel using slip ratio. Traversality of flexible wheel was better than the circular rigid wheel. The authors believe that stress distribution is important. The stress distribution of the flexible wheels is horizontally long and stress value is small. However, the stress distribution can be changed by loaded more weight. Therefore, the relationship between the stress and the running performance was considered using this differential stress distribution. In experiments, the authors used the flexible wheel with simple structure （3 limbs）. From these considerations, the relationship between the stress of the flexible wheel and the running performance was described.展开更多
Virtual simulation technology is of great importance for the teleoperation of lunar rovers during the exploration phase,as well as the design of locomotion systems,performance evaluation,and control strategy verificat...Virtual simulation technology is of great importance for the teleoperation of lunar rovers during the exploration phase,as well as the design of locomotion systems,performance evaluation,and control strategy verification during the R&D phase.The currently used simulation methods for lunar rovers have several disadvantages such as poor fidelity for wheel-soil interaction mechanics,difficulty in simulating rough terrains,and high complexity making it difficult to realize mobility control in simulation systems.This paper presents an approach for the construction of a virtual simulation system that integrates the features of 3D modeling,wheel-soil interaction mechanics,dynamics analysis,mobility control,and visualization for lunar rovers.Wheel-soil interaction experiments are carried out to test the forces and moments acted on a lunar rover’s wheel by the soil with a vertical load of 80 N and slip ratios of 0,0.03,0.05,0.1,0.2,0.3,0.4,and 0.6.The experimental results are referenced in order to set the parameters’values for the PAC2002 tire model of the ADAMS/Tire module.In addition,the rough lunar terrain is simulated with 3DS Max software after analyzing its characteristics,and a data-transfer program is developed with Matlab to simulate the 3D reappearance of a lunar environment in ADAMS.The 3D model of a lunar rover is developed by using Pro/E software and is then imported into ADAMS.Finally,a virtual simulation system for lunar rovers is developed.A path-following control strategy based on slip compensation for a six-wheeled lunar rover prototype is researched.The controller is implemented by using Matlab/Simulink to carry out joint simulations with ADAMS.The designed virtual lunar rover could follow the planned path on a rough terrain.This paper can also provide a reference scheme for virtual simulation and performance analysis of rovers moving on rough lunar terrains.展开更多
Inertial navigation system/visual navigation system(INS/VNS) integrated navigation is a commonly used autonomous navigation method for planetary rovers. Since visual measurements are related to the previous and curren...Inertial navigation system/visual navigation system(INS/VNS) integrated navigation is a commonly used autonomous navigation method for planetary rovers. Since visual measurements are related to the previous and current state vectors(position and attitude) of planetary rovers, the performance of the Kalman filter(KF) will be challenged by the time-correlation problem. A state augmentation method, which augments the previous state value to the state vector, is commonly used when dealing with this problem. However, the augmenting of state dimensions will result in an increase in computation load. In this paper, a state dimension reduced INS/VNS integrated navigation method based on coordinates of feature points is presented that utilizes the information obtained through INS/VNS integrated navigation at a previous moment to overcome the time relevance problem and reduce the dimensions of the state vector. Equations of extended Kalman filter(EKF) are used to demonstrate the equivalence of calculated results between the proposed method and traditional state augmented methods. Results of simulation and experimentation indicate that this method has less computational load but similar accuracy when compared with traditional methods.展开更多
Based on the study of passive articulated rover,a complete suspension kinematics model from wheel to inertial reference frame is presented,which uses D-H method of manipulator and presentation with Euler angle of pitc...Based on the study of passive articulated rover,a complete suspension kinematics model from wheel to inertial reference frame is presented,which uses D-H method of manipulator and presentation with Euler angle of pitch,roll and yaw.An improved contact model is adopted aimed at the loose and rough lunar terrain.Using this kinematics model and numerical continuous and discrete Newton's method with iterative factor,the numerical method for estimation of kinematical parameters of articulated rovers on loose and rough terrain is constructed.To demonstrate this numerical method,an example of two torsion bar rocker-bogie lunar rover with eight wheels is presented.Simulation results show that the numerical method for estimation of kinematical parameters of articulated rovers based on improved contact model can improve the precision of kinematical estimation on loose and rough terrain and decrease errors caused by contact models established based on general hypothesis.展开更多
In order to ensure the safety and efficiency of planetary exploration rovers,path planning and tracking control of a planetary rover are expected to consider factors such as complex 3D terrain features,the motion cons...In order to ensure the safety and efficiency of planetary exploration rovers,path planning and tracking control of a planetary rover are expected to consider factors such as complex 3D terrain features,the motion constraints of the rover,traversability,etc.An improved path planning and tracking control method is proposed for planetary exploration rovers on rough terrain in this paper.Firstly,the kinematic model of the planetary rover is established.A 3D motion primitives library adapted to various terrains and the rover’s orientations is generated.The state expansion process and heuristic function of the A*algorithm are improved using the motion primitives and terrain features.Global path is generated by improved A*-based algorithm that satisfies the planetary rover’s kinematic constraints and the 3D terrain restrictions.Subsequently,an optional arc path set is designed based on the traversable capabilities of the planetary rover.Each arc path corresponds to a specific motion that determines the linear and angular velocities of the planetary rover.The optimal path is selected through the multi-objective evaluation function.The planetary rover is driven to accurately track the global path by sending optimal commands that corresponds to the optimal path for real-time obstacle avoidance.Finally,the path planning and tracking control method is effectively validated during a given mission through two simulation tests.The experiment results show that the improved A*-based algorithm reduces planning time by 30.05% and generates smoother paths than the classic A^(*) algorithm.The multi-objective arc-based method improves the rover’s motion efficiency,ensuring safer and quicker mission completion along the global path.展开更多
Accurate localization is critical for lunar rovers exploring lunar terrain features.Traditionally,lunar rover localization relies on sensor data from odometers,inertial measurement units and stereo cameras.However,loc...Accurate localization is critical for lunar rovers exploring lunar terrain features.Traditionally,lunar rover localization relies on sensor data from odometers,inertial measurement units and stereo cameras.However,localization errors accumulate over long traverses,limiting the rover’s localization accuracy.This paper presents a metric localization framework based on cross-view images(ground view from a rover and air view from an orbiter)to eliminate accumulated localization errors.First,we employ perspective projection to reduce the geometric differences in cross-view images.Then,we propose an image-based metric localization network to extract image features and generate a location heatmap.This heatmap serves as the basis for accurate estimation of query locations.We also create the first large-area lunar cross-view image(Lunar-CV)dataset to evaluate the localization performance.This dataset consists of 30 digital orthophoto maps(DOMs)with a resolution of 7 m/pix,collected by the Chang’e-2 lunar orbiter,along with 8100 simulated rover panoramas.Experimental results on the Lunar-CV dataset demonstrate the superior performance of our proposed framework.Compared to the second best method,our method significantly reduces the average localization error by 26% and the median localization error by 22%.展开更多
1 A possible ancient shoreline has been found in the region of Mars explored by the Chinese rover,Zhurong,providing further evidence that an ocean may once have covered a vast area of the lowlands in the planet's ...1 A possible ancient shoreline has been found in the region of Mars explored by the Chinese rover,Zhurong,providing further evidence that an ocean may once have covered a vast area of the lowlands in the planet's northern part.2 The rover landed in southern Utopia Planitia in May 2021 and remained active for almost a year.Researchers studying data from the rover have found clues of an ancient ocean or liquid water as recently as 400,000 years ago.展开更多
The harsh and remote environments of polar regions,such as the Arctic and Antarctica,pose significant challenges for scientific exploration,particularly in ice sampling.Extreme conditions,including low temperatures,ic...The harsh and remote environments of polar regions,such as the Arctic and Antarctica,pose significant challenges for scientific exploration,particularly in ice sampling.Extreme conditions,including low temperatures,ice,snow,and natural obstacles,make access to these areas difficult.However,ice sampling from glaciers,ice sheets,and icebergs is critical for scientific research,necessitating the development of specialized equipment.Unmanned ice-drilling systems offer a promising solution by enabling safe and efficient ice core sample collection in remote locations.Advances in extraterrestrial ice-drilling technology have inspired the development of automated drilling systems for Earth’s polar regions,with recent efforts focusing on lightweight,electric or solar-powered rovers which can tow or mount drilling systems.This paper introduces the concept of a robotic drilling system designed at Jilin University,China,for shallow drilling operations from an unmanned polar rover,highlighting its design and operational features.展开更多
The Altomani&Sons Collection owns a remarkable newly discovered portrait of Guidobaldo II della Rovere,Duke of Urbino(1514-1574),a historical military figure who was a condottiere,ruler of Urbino,Commander-in-chie...The Altomani&Sons Collection owns a remarkable newly discovered portrait of Guidobaldo II della Rovere,Duke of Urbino(1514-1574),a historical military figure who was a condottiere,ruler of Urbino,Commander-in-chief of the Papal Estate,and Perfect of Rome,as well as a collector and patron of the Fine Arts.Camilla Guerrieri Nati(1628-1694),a seventeenth-century Italian painter from Fossombrone(in the province of Pesaro and Urbino),portrayed this heroic personage surrounded by emblems associated with his military courage and leadership,including his plumed burgonet helmet,metal gilded armor,a necklace with the golden fleece,and batons of secular and religious dominions.This oil painting on copper-considered a precious metal at the time-emphasizes the importance of the commission.The material and technique also reveals a unique artistic achievement in that it provides the painting with a smooth,reflective surface and vibrant coloration,symbolizing precious imagery.展开更多
A new object-oriented method has been developed for the extraction of Mars rocks from Mars rover data. It is based on a combination of Mars rover imagery and 3D point cloud data. First, Navcam or Pancam images taken b...A new object-oriented method has been developed for the extraction of Mars rocks from Mars rover data. It is based on a combination of Mars rover imagery and 3D point cloud data. First, Navcam or Pancam images taken by the Mars rovers are segmented into homogeneous objects with a mean-shift algorithm. Then, the objects in the segmented images are classified into small rock candidates, rock shadows, and large objects. Rock shadows and large objects are considered as the regions within which large rocks may exist. In these regions, large rock candidates are extracted through ground-plane fitting with the 3D point cloud data. Small and large rock candidates are combined and postprocessed to obtain the final rock extraction results. The shape properties of the rocks （angularity, circularity, width, height, and width-height ratio） have been calculated for subsequent ~eological studies.展开更多
In order to investigate wheel slip-sinkage problem, which is important for the design, control and simulation of lunar rovers, experiments were carried out with a wheel-soil interaction test system to measure the sink...In order to investigate wheel slip-sinkage problem, which is important for the design, control and simulation of lunar rovers, experiments were carried out with a wheel-soil interaction test system to measure the sinkage of three types of wheels in dimension with wheel lugs of different heights and numbers under a series of slip ratios (0-0.6). The curves of wheel sinkage versus slip ratio were obtained and it was found that the sinkage with slip ratio of 0.6 is 3-7 times of the static sinkage. Based on the experimental results, the slip-sinkage principle of lunar's rover lugged wheels (including the sinkage caused by longitudinal flow and side flow of soil, and soil digging of wheel lugs) was analyzed, and corresponding calculation equations were derived. All the factors that can cause slip sinkage were considered to improve the conventional wheel-soil interaction model, and a formula of changing the sinkage exponent with the slip ratio was established. Mathematical model for calculating the sinkage of wheel according to vertical load and slip ratio was developed. Calculation results show that this model can predict the slip-sinkage of wheel with high precision, making up the deficiency of Wong-Reece model that mainly reflects longitudinal slip-sinkage.展开更多
Based on ranging intersection theory, a new method which is simple and easy to operate was proposed for data collection in the mine surface deformation monitoring with GPS-RTK centering rod measurements. It can fully ...Based on ranging intersection theory, a new method which is simple and easy to operate was proposed for data collection in the mine surface deformation monitoring with GPS-RTK centering rod measurements. It can fully eliminate the inevitable shaking error and the vertical deflection, and to some extent weaken the multipath effect on the estimates of coordinates in a relatively short period of time, using high-frequency observations. The results show that three-dimensional coordinates with a height accuracy better than 1 cm, horizontal accuracy better than 2-4 cm can be achieved through only 15-30 s continuous observation by 20 Hz high-frequency and effectively improve the measurement accuracy and efficiency of RTK, fully satisfying the high-speed and high-precision data acquisition in mine surface subsidence deformation monitoring.展开更多
China's Mars probe,named Tianwen-1,including an orbiter and a landing rover,will be launched during the July-August 2020 Mars launch windows.Selected to be among the rover payloads is a Subsurface Penetrating Rada...China's Mars probe,named Tianwen-1,including an orbiter and a landing rover,will be launched during the July-August 2020 Mars launch windows.Selected to be among the rover payloads is a Subsurface Penetrating Radar module(RoSPR).The main scientific objective of the RoSPR is to characterize the thickness and sub-layer distribution of the Martian soil.The RoSPR consists of two channels.The low frequency channel of the RoSPR will penetrate the Martian soil to depths of 10 to 100 m with a resolution of a few meters.The higher frequency channel will penetrate to a depth of 3 to 10 m with a resolution of a few centimeters.This paper describes the design of the instrument and some results of field experiments.展开更多
This paper presents a brief overview of the geospatial technologies developed and applied in Chang’e-3 and Chang’e-4 lunar rover missions.Photogrammetric mapping techniques were used to produce topographic products ...This paper presents a brief overview of the geospatial technologies developed and applied in Chang’e-3 and Chang’e-4 lunar rover missions.Photogrammetric mapping techniques were used to produce topographic products of the landing site with meter level resolution using orbital images before landing,and to produce centimeter-resolution topographic products in near real-time after landing.Visual positioning techniques were used to determine the locations of the two landers using descent images and orbital basemaps immediately after landing.During surface operations,visual-positioning-based rover localization was performed routinely at each waypoint using Navcam images.The topographic analysis and rover localization results directly supported waypoint-to-waypoint path planning,science target selection and scientific investigations.A GIS-based digital cartography system was also developed to support rover teleoperation.展开更多
The mission and function requirements of lunar rover are analyzed, based on virtual prototype technology, the mobility evaluation theory and method for wheeled space rover are proposed, which provide a new way to stud...The mission and function requirements of lunar rover are analyzed, based on virtual prototype technology, the mobility evaluation theory and method for wheeled space rover are proposed, which provide a new way to study the innovative design of lunar rover. Based on the above theoretical system, an innovative lunar rover suspension system, which adopts a two-crank-slider mechanism, is proposed, and its dynamics model is created. Adopting virtual prototype technology, the ground adaptability, over-obstacle ability and driving placidity of the rover are evaluated in the virtual prototype software ADAMS. The analysis results show that the rover provides a high degree of mobility.展开更多
Lunar Penetrating Radar （LPR） is one of the important scientific instru- ments onboard the Chang＇e-3 spacecraft. Its scientific goals are the mapping of lunar regolith and detection of subsurface geologic structure...Lunar Penetrating Radar （LPR） is one of the important scientific instru- ments onboard the Chang＇e-3 spacecraft. Its scientific goals are the mapping of lunar regolith and detection of subsurface geologic structures. This paper describes the goals of the mission, as well as the basic principles, design, composition and achievements of the LPR. Finally, experiments on a glacier and the lunar surface are analyzed.展开更多
It is well-known that optimizing the wheel system of lunar rovers is essential.However,this is a difficult task due to the complex terrain of the moon and limited resources onboard lunar rovers.In this study,an experi...It is well-known that optimizing the wheel system of lunar rovers is essential.However,this is a difficult task due to the complex terrain of the moon and limited resources onboard lunar rovers.In this study,an experimental prototype was set up to analyze the existing mechanical design of a lunar rover and improve its performance.First,a new vane-telescopic walking wheel was proposed for the lunar rover with a positive and negative quadrangle suspension,considering the complex terrain of the moon.Next,the performance was optimized under the limitations of preserving the slope passage and minimizing power consumption.This was achieved via analysis of the wheel force during movement.Finally,the effectiveness of the proposed method was demonstrated by several simulation experiments.The newly designed wheel can protrude on demand and reduce energy consumption;it can be used as a reference for lunar rover development engineering in China.展开更多
In-situ exploration of asteroid surfaces is of great scientific significance.Internally actuated rovers have been released to asteroid surfaces but without enough controllability.To investigate the attitude control ch...In-situ exploration of asteroid surfaces is of great scientific significance.Internally actuated rovers have been released to asteroid surfaces but without enough controllability.To investigate the attitude control characteristics of the cubic rover for asteroid surface exploration,a series of experiments are carried out using the self-designed rover and the low-gravity testbed.The experiments focus on two major themes:The minimum flywheel speed for cubic rover to produce a walking motion in different conditions,and the relationship between the rover’s rotation angle and the flywheel speed in twisting motion.The rover’s dynamical descriptions of the walking and twisting motions are first derived.The features and design of the low-gravity testbed are then summarized,including its dynamics,setup,and validation.A detailed comparison between the dynamic model and the experimental results is presented,which provides a basic reference of the cubic rover’s attitude control in low-gravity environments.展开更多
文摘This paper addresses the challenges of insufficient navigation accuracy,low path-planning efficiency,and poor environmental adaptability faced by deep space rovers in complex extraterrestrial environments(e.g.,the Moon and Mars).A novel autonomous navigation scheme is proposed that integrates laser Doppler velocimetry(LDV)with star trackers(ST)and inertial navigation system(INS).The scheme suppresses slip errors from wheel odometry through non-contact,high-precision laser speed measurement(accuracy better than 0.1%).By deeply fusing multi-source data via a Kalman filter algorithm,high-precision positioning is realized under extreme extraterrestrial conditions such as weak illumination and dust coverage.This solution features high accuracy,non-contact measurement,and anti-interference capabilities,significantly improving the navigation accuracy and autonomy of deep space rovers in complex environments.
文摘On lunar exploration missions, the rovers which can move and explore directly are considered by various agency like NASA （National Aeronautics and Space Administration）, JAXA （Japan Aerospace Exploration Agency）, ESA （European Space Agency）. Lunar rovers are required to move on rough terrains such as craters and rear cliffs where it is scientifically very important to explore. However, there is a problem that the rovers have possibility of stack because of the lunar surface is covered with loose soil named Regolith. Therefore, this paper investigates a mechanism of kinetic behavior between the wheels of the exploration rovers and loose soil. And then, this paper proposed a flexible wheel to solve like that problems. The flexible wheel has the surface which can be changed flexibly toward rough terrain. Running experiments on loose soil which imitated regolith were carried out to observe the traversability of the flexible wheel using slip ratio. Traversality of flexible wheel was better than the circular rigid wheel. The authors believe that stress distribution is important. The stress distribution of the flexible wheels is horizontally long and stress value is small. However, the stress distribution can be changed by loaded more weight. Therefore, the relationship between the stress and the running performance was considered using this differential stress distribution. In experiments, the authors used the flexible wheel with simple structure （3 limbs）. From these considerations, the relationship between the stress of the flexible wheel and the running performance was described.
基金supported by National Natural Science Foundation of China(Grant No.50975059,Grant No.61005080)Postdoctoral Foundation of China(Grant No.20100480994)+1 种基金Postdoctoral Foundation of Heilongjiang Province,Foundation of Chinese State Key Laboratory of Robotics and Systems(Grant No.SKLRS200801A02)College Discipline Innovation Wisdom Plan of China(111 Project,Grant No.B07018)
文摘Virtual simulation technology is of great importance for the teleoperation of lunar rovers during the exploration phase,as well as the design of locomotion systems,performance evaluation,and control strategy verification during the R&D phase.The currently used simulation methods for lunar rovers have several disadvantages such as poor fidelity for wheel-soil interaction mechanics,difficulty in simulating rough terrains,and high complexity making it difficult to realize mobility control in simulation systems.This paper presents an approach for the construction of a virtual simulation system that integrates the features of 3D modeling,wheel-soil interaction mechanics,dynamics analysis,mobility control,and visualization for lunar rovers.Wheel-soil interaction experiments are carried out to test the forces and moments acted on a lunar rover’s wheel by the soil with a vertical load of 80 N and slip ratios of 0,0.03,0.05,0.1,0.2,0.3,0.4,and 0.6.The experimental results are referenced in order to set the parameters’values for the PAC2002 tire model of the ADAMS/Tire module.In addition,the rough lunar terrain is simulated with 3DS Max software after analyzing its characteristics,and a data-transfer program is developed with Matlab to simulate the 3D reappearance of a lunar environment in ADAMS.The 3D model of a lunar rover is developed by using Pro/E software and is then imported into ADAMS.Finally,a virtual simulation system for lunar rovers is developed.A path-following control strategy based on slip compensation for a six-wheeled lunar rover prototype is researched.The controller is implemented by using Matlab/Simulink to carry out joint simulations with ADAMS.The designed virtual lunar rover could follow the planned path on a rough terrain.This paper can also provide a reference scheme for virtual simulation and performance analysis of rovers moving on rough lunar terrains.
基金supported by the National Natural Science Foundation of China (Nos. 61233005 and 61503013)the National Basic Research Program of China (No. 2014CB744202)+2 种基金Beijing Youth Talent ProgramFundamental Science on Novel Inertial Instrument & Navigation System Technology LaboratoryProgram for Changjiang Scholars and Innovative Research Team in University (IRT1203) for their valuable comments
文摘Inertial navigation system/visual navigation system(INS/VNS) integrated navigation is a commonly used autonomous navigation method for planetary rovers. Since visual measurements are related to the previous and current state vectors(position and attitude) of planetary rovers, the performance of the Kalman filter(KF) will be challenged by the time-correlation problem. A state augmentation method, which augments the previous state value to the state vector, is commonly used when dealing with this problem. However, the augmenting of state dimensions will result in an increase in computation load. In this paper, a state dimension reduced INS/VNS integrated navigation method based on coordinates of feature points is presented that utilizes the information obtained through INS/VNS integrated navigation at a previous moment to overcome the time relevance problem and reduce the dimensions of the state vector. Equations of extended Kalman filter(EKF) are used to demonstrate the equivalence of calculated results between the proposed method and traditional state augmented methods. Results of simulation and experimentation indicate that this method has less computational load but similar accuracy when compared with traditional methods.
基金Sponsored by the National High Technology Research and Development Program of China(863 Program)(Grant No.2006AA04Z231)the National Science Foundation of Heilongjiang Province(Grant No.ZJG0709)"The 111 Project"(Grant No.B07018)
文摘Based on the study of passive articulated rover,a complete suspension kinematics model from wheel to inertial reference frame is presented,which uses D-H method of manipulator and presentation with Euler angle of pitch,roll and yaw.An improved contact model is adopted aimed at the loose and rough lunar terrain.Using this kinematics model and numerical continuous and discrete Newton's method with iterative factor,the numerical method for estimation of kinematical parameters of articulated rovers on loose and rough terrain is constructed.To demonstrate this numerical method,an example of two torsion bar rocker-bogie lunar rover with eight wheels is presented.Simulation results show that the numerical method for estimation of kinematical parameters of articulated rovers based on improved contact model can improve the precision of kinematical estimation on loose and rough terrain and decrease errors caused by contact models established based on general hypothesis.
基金funded by the State Key Laboratory,China(KJW6142210210308)the National Natural Science Founda-tion of China(61806183).
文摘In order to ensure the safety and efficiency of planetary exploration rovers,path planning and tracking control of a planetary rover are expected to consider factors such as complex 3D terrain features,the motion constraints of the rover,traversability,etc.An improved path planning and tracking control method is proposed for planetary exploration rovers on rough terrain in this paper.Firstly,the kinematic model of the planetary rover is established.A 3D motion primitives library adapted to various terrains and the rover’s orientations is generated.The state expansion process and heuristic function of the A*algorithm are improved using the motion primitives and terrain features.Global path is generated by improved A*-based algorithm that satisfies the planetary rover’s kinematic constraints and the 3D terrain restrictions.Subsequently,an optional arc path set is designed based on the traversable capabilities of the planetary rover.Each arc path corresponds to a specific motion that determines the linear and angular velocities of the planetary rover.The optimal path is selected through the multi-objective evaluation function.The planetary rover is driven to accurately track the global path by sending optimal commands that corresponds to the optimal path for real-time obstacle avoidance.Finally,the path planning and tracking control method is effectively validated during a given mission through two simulation tests.The experiment results show that the improved A*-based algorithm reduces planning time by 30.05% and generates smoother paths than the classic A^(*) algorithm.The multi-objective arc-based method improves the rover’s motion efficiency,ensuring safer and quicker mission completion along the global path.
基金partially supported by the Shenzhen Key Laboratory of Navigation and Communication Integration(No.ZDSYS20210623091807023).
文摘Accurate localization is critical for lunar rovers exploring lunar terrain features.Traditionally,lunar rover localization relies on sensor data from odometers,inertial measurement units and stereo cameras.However,localization errors accumulate over long traverses,limiting the rover’s localization accuracy.This paper presents a metric localization framework based on cross-view images(ground view from a rover and air view from an orbiter)to eliminate accumulated localization errors.First,we employ perspective projection to reduce the geometric differences in cross-view images.Then,we propose an image-based metric localization network to extract image features and generate a location heatmap.This heatmap serves as the basis for accurate estimation of query locations.We also create the first large-area lunar cross-view image(Lunar-CV)dataset to evaluate the localization performance.This dataset consists of 30 digital orthophoto maps(DOMs)with a resolution of 7 m/pix,collected by the Chang’e-2 lunar orbiter,along with 8100 simulated rover panoramas.Experimental results on the Lunar-CV dataset demonstrate the superior performance of our proposed framework.Compared to the second best method,our method significantly reduces the average localization error by 26% and the median localization error by 22%.
文摘1 A possible ancient shoreline has been found in the region of Mars explored by the Chinese rover,Zhurong,providing further evidence that an ocean may once have covered a vast area of the lowlands in the planet's northern part.2 The rover landed in southern Utopia Planitia in May 2021 and remained active for almost a year.Researchers studying data from the rover have found clues of an ancient ocean or liquid water as recently as 400,000 years ago.
基金supported by the National Key Research and Development Project of the Ministry of Science and Technology of China(Grant nos.2023YFC2812602 and 2021YFC2801401)the National Natural Science Foundation of China(Grant no.41941005).
文摘The harsh and remote environments of polar regions,such as the Arctic and Antarctica,pose significant challenges for scientific exploration,particularly in ice sampling.Extreme conditions,including low temperatures,ice,snow,and natural obstacles,make access to these areas difficult.However,ice sampling from glaciers,ice sheets,and icebergs is critical for scientific research,necessitating the development of specialized equipment.Unmanned ice-drilling systems offer a promising solution by enabling safe and efficient ice core sample collection in remote locations.Advances in extraterrestrial ice-drilling technology have inspired the development of automated drilling systems for Earth’s polar regions,with recent efforts focusing on lightweight,electric or solar-powered rovers which can tow or mount drilling systems.This paper introduces the concept of a robotic drilling system designed at Jilin University,China,for shallow drilling operations from an unmanned polar rover,highlighting its design and operational features.
文摘The Altomani&Sons Collection owns a remarkable newly discovered portrait of Guidobaldo II della Rovere,Duke of Urbino(1514-1574),a historical military figure who was a condottiere,ruler of Urbino,Commander-in-chief of the Papal Estate,and Perfect of Rome,as well as a collector and patron of the Fine Arts.Camilla Guerrieri Nati(1628-1694),a seventeenth-century Italian painter from Fossombrone(in the province of Pesaro and Urbino),portrayed this heroic personage surrounded by emblems associated with his military courage and leadership,including his plumed burgonet helmet,metal gilded armor,a necklace with the golden fleece,and batons of secular and religious dominions.This oil painting on copper-considered a precious metal at the time-emphasizes the importance of the commission.The material and technique also reveals a unique artistic achievement in that it provides the painting with a smooth,reflective surface and vibrant coloration,symbolizing precious imagery.
基金supported by the National Natural Science Foundation of China(Nos.41171355and41002120)
文摘A new object-oriented method has been developed for the extraction of Mars rocks from Mars rover data. It is based on a combination of Mars rover imagery and 3D point cloud data. First, Navcam or Pancam images taken by the Mars rovers are segmented into homogeneous objects with a mean-shift algorithm. Then, the objects in the segmented images are classified into small rock candidates, rock shadows, and large objects. Rock shadows and large objects are considered as the regions within which large rocks may exist. In these regions, large rock candidates are extracted through ground-plane fitting with the 3D point cloud data. Small and large rock candidates are combined and postprocessed to obtain the final rock extraction results. The shape properties of the rocks （angularity, circularity, width, height, and width-height ratio） have been calculated for subsequent ~eological studies.
基金Project(50975059) supported by the National Natural Science Foundation of ChinaProject(2006AA04Z231) supported by the National High-Tech Research and Development Program of China+2 种基金Project(ZJG0709) supported by Key Natural Science Foundation of Heilongjiang Province of ChinaProject(B07018) supported by the Program of Introducing Talents of Discipline to UniversityProject (SKLRS200801A02) supported by Chinese State Key Laboratory of Robotics and System Foundation
文摘In order to investigate wheel slip-sinkage problem, which is important for the design, control and simulation of lunar rovers, experiments were carried out with a wheel-soil interaction test system to measure the sinkage of three types of wheels in dimension with wheel lugs of different heights and numbers under a series of slip ratios (0-0.6). The curves of wheel sinkage versus slip ratio were obtained and it was found that the sinkage with slip ratio of 0.6 is 3-7 times of the static sinkage. Based on the experimental results, the slip-sinkage principle of lunar's rover lugged wheels (including the sinkage caused by longitudinal flow and side flow of soil, and soil digging of wheel lugs) was analyzed, and corresponding calculation equations were derived. All the factors that can cause slip sinkage were considered to improve the conventional wheel-soil interaction model, and a formula of changing the sinkage exponent with the slip ratio was established. Mathematical model for calculating the sinkage of wheel according to vertical load and slip ratio was developed. Calculation results show that this model can predict the slip-sinkage of wheel with high precision, making up the deficiency of Wong-Reece model that mainly reflects longitudinal slip-sinkage.
基金Projects(41074010,40904004)supported by National Natural Science Foundation of ChinaProject(LEDM2010B12)supported by the Scientific Research Foundation of Key Laboratory for Land Environment and Disaster Monitoring of SBSM,China
文摘Based on ranging intersection theory, a new method which is simple and easy to operate was proposed for data collection in the mine surface deformation monitoring with GPS-RTK centering rod measurements. It can fully eliminate the inevitable shaking error and the vertical deflection, and to some extent weaken the multipath effect on the estimates of coordinates in a relatively short period of time, using high-frequency observations. The results show that three-dimensional coordinates with a height accuracy better than 1 cm, horizontal accuracy better than 2-4 cm can be achieved through only 15-30 s continuous observation by 20 Hz high-frequency and effectively improve the measurement accuracy and efficiency of RTK, fully satisfying the high-speed and high-precision data acquisition in mine surface subsidence deformation monitoring.
基金support from the China National Space Administration.
文摘China's Mars probe,named Tianwen-1,including an orbiter and a landing rover,will be launched during the July-August 2020 Mars launch windows.Selected to be among the rover payloads is a Subsurface Penetrating Radar module(RoSPR).The main scientific objective of the RoSPR is to characterize the thickness and sub-layer distribution of the Martian soil.The RoSPR consists of two channels.The low frequency channel of the RoSPR will penetrate the Martian soil to depths of 10 to 100 m with a resolution of a few meters.The higher frequency channel will penetrate to a depth of 3 to 10 m with a resolution of a few centimeters.This paper describes the design of the instrument and some results of field experiments.
基金This work was supported by the National Natural Science Foundation of China[grant number 41671458,41590851,41941003,and 41771488].
文摘This paper presents a brief overview of the geospatial technologies developed and applied in Chang’e-3 and Chang’e-4 lunar rover missions.Photogrammetric mapping techniques were used to produce topographic products of the landing site with meter level resolution using orbital images before landing,and to produce centimeter-resolution topographic products in near real-time after landing.Visual positioning techniques were used to determine the locations of the two landers using descent images and orbital basemaps immediately after landing.During surface operations,visual-positioning-based rover localization was performed routinely at each waypoint using Navcam images.The topographic analysis and rover localization results directly supported waypoint-to-waypoint path planning,science target selection and scientific investigations.A GIS-based digital cartography system was also developed to support rover teleoperation.
基金This project is supported by National Natural Science Foundation of China (No.60234030).
文摘The mission and function requirements of lunar rover are analyzed, based on virtual prototype technology, the mobility evaluation theory and method for wheeled space rover are proposed, which provide a new way to study the innovative design of lunar rover. Based on the above theoretical system, an innovative lunar rover suspension system, which adopts a two-crank-slider mechanism, is proposed, and its dynamics model is created. Adopting virtual prototype technology, the ground adaptability, over-obstacle ability and driving placidity of the rover are evaluated in the virtual prototype software ADAMS. The analysis results show that the rover provides a high degree of mobility.
基金funded by the second phase of the Chinese Lunar Exploration Program
文摘Lunar Penetrating Radar （LPR） is one of the important scientific instru- ments onboard the Chang＇e-3 spacecraft. Its scientific goals are the mapping of lunar regolith and detection of subsurface geologic structures. This paper describes the goals of the mission, as well as the basic principles, design, composition and achievements of the LPR. Finally, experiments on a glacier and the lunar surface are analyzed.
文摘It is well-known that optimizing the wheel system of lunar rovers is essential.However,this is a difficult task due to the complex terrain of the moon and limited resources onboard lunar rovers.In this study,an experimental prototype was set up to analyze the existing mechanical design of a lunar rover and improve its performance.First,a new vane-telescopic walking wheel was proposed for the lunar rover with a positive and negative quadrangle suspension,considering the complex terrain of the moon.Next,the performance was optimized under the limitations of preserving the slope passage and minimizing power consumption.This was achieved via analysis of the wheel force during movement.Finally,the effectiveness of the proposed method was demonstrated by several simulation experiments.The newly designed wheel can protrude on demand and reduce energy consumption;it can be used as a reference for lunar rover development engineering in China.
基金the National Natural Science Foundation of China(No.11972075)the Innovation Research Program of Beijing Institute of Technology(No.2021CX01029)。
文摘In-situ exploration of asteroid surfaces is of great scientific significance.Internally actuated rovers have been released to asteroid surfaces but without enough controllability.To investigate the attitude control characteristics of the cubic rover for asteroid surface exploration,a series of experiments are carried out using the self-designed rover and the low-gravity testbed.The experiments focus on two major themes:The minimum flywheel speed for cubic rover to produce a walking motion in different conditions,and the relationship between the rover’s rotation angle and the flywheel speed in twisting motion.The rover’s dynamical descriptions of the walking and twisting motions are first derived.The features and design of the low-gravity testbed are then summarized,including its dynamics,setup,and validation.A detailed comparison between the dynamic model and the experimental results is presented,which provides a basic reference of the cubic rover’s attitude control in low-gravity environments.
