The generation and reconnection of magneticflux ropes in a plasma irradiated by two Laguerre–Gaussian laser pulses with different frequen-cies and opposite topological charges are investigated numerically by particle-...The generation and reconnection of magneticflux ropes in a plasma irradiated by two Laguerre–Gaussian laser pulses with different frequen-cies and opposite topological charges are investigated numerically by particle-in-cell simulations.It is shown that twisted plasma currents and hence magneticflux ropes can be effectively generated as long as the laser frequency difference matches the electron plasma frequency.More importantly,subsequent reconnection of magneticflux ropes can occur.Typical signatures of magnetic reconnection,such as magnetic island formation and plasma heating,are identified in the reconnection of magneticflux ropes.Notably,it is found that a strong axial magneticfield can be generated on the axis,owing to the azimuthal current induced during the reconnection of the ropes.This indicates that in the reconnection of magneticflux ropes,the energy can be transferred not only from the magneticfield to the plasma but also from the plasma current back to the magneticfield.This work opens a new avenue to the study of magneticflux ropes,which helps in understanding magnetic topology changes,and resultant magnetic energy dissipation,plasma heating,and particle acceleration found in solarflares,and magnetic confinement fusion devices.展开更多
The complex geometrical features of mechanical components significantly influence contact interactions and system dynamics.However,directly modeling contact forces on surfaces with intricate geometries presents consid...The complex geometrical features of mechanical components significantly influence contact interactions and system dynamics.However,directly modeling contact forces on surfaces with intricate geometries presents considerable challenges.This study focuses on the helically twisted wire rope-sheave contact and proposes a contact force model that incorporates complex geometric features through a parameter identification approach.The model's impact on contact forces and system dynamics is thoroughly investigated.Leveraging a point contact model and an elliptic integral approximation,a loss function is formulated using the finite element(FE)contact model results as the reference data.Geometric parameters are subsequently determined by optimizing this loss function via a genetic algorithm(GA).The findings reveal that the contact stiffness increases with the wire rope pitch length,the radius of principal curvature,and the elliptic eccentricity of the contact zone.The proposed contact force model is integrated into a rigid-flexible coupled dynamics model,developed by the absolute node coordinate formulation,to examine the effects of contact geometry on system dynamics.The results demonstrate that the variations in wire rope geometry alter the contact stiffness,which in turn affects dynamic rope tension through frictional energy dissipation.The enhanced model's predictions exhibit superior alignment with the experimental data,thereby validating the methodology.This approach provides new insights for deducing the contact geometry from kinetic parameters and monitoring the performance degradation of mechanical components.展开更多
In heavy-duty long-distance transmission scenarios,steel wire ropes are widely used due to their unique advantages,and their safety is very important,which has also led to the rapid development of non-destructive test...In heavy-duty long-distance transmission scenarios,steel wire ropes are widely used due to their unique advantages,and their safety is very important,which has also led to the rapid development of non-destructive testing technology for steel wire ropes.The non-destructive testing technology for steel wire ropes is influenced by various factors such as its own structure and external working environment,and the testing process is relatively complex.Multiple testing methods and related types of sensors have also emerged.The electromagnetic detection method is currently the most effective method,but it also has its limitations in development and has not yet fully achieved the expected detection goals.In order to completely replace manual inspection work with the development of non-destructive testing technology for steel wire ropes,more in-depth research and long-term accumulation are still needed.展开更多
Aimed at the long and narrow geometric features and poor generalization ability of the damage detection in conveyor belts with steel rope cores using the X-ray image,a detection method of damage X-ray image is propose...Aimed at the long and narrow geometric features and poor generalization ability of the damage detection in conveyor belts with steel rope cores using the X-ray image,a detection method of damage X-ray image is proposed based on the improved fully convolutional one-stage object detection(FCOS)algorithm.The regression performance of bounding boxes was optimized by introducing the complete intersection over union loss function into the improved algorithm.The feature fusion network structure is modified by adding adaptive fusion paths to the feature fusion network structure,which makes full use of the features of accurate localization and semantics of multi-scale feature fusion networks.Finally,the network structure was trained and validated by using the X-ray image dataset of damages in conveyor belts with steel rope cores provided by a flaw detection equipment manufacturer.In addition,the data enhancement methods such as rotating,mirroring,and scaling,were employed to enrich the image dataset so that the model is adequately trained.Experimental results showed that the improved FCOS algorithm promoted the precision rate and the recall rate by 20.9%and 14.8%respectively,compared with the original algorithm.Meanwhile,compared with Fast R-CNN,Faster R-CNN,SSD,and YOLOv3,the improved FCOS algorithm has obvious advantages;detection precision rate and recall rate of the modified network reached 95.8%and 97.0%respectively.Furthermore,it demonstrated a higher detection accuracy without affecting the speed.The results of this work have some reference significance for the automatic identification and detection of steel core conveyor belt damage.展开更多
The multi-robot coordinated lifting system is an unconstrained system with a rigid and flexible coupling.The deformation of the flexible rope causes errors in the movement trajectory of the lifting system.Based on the...The multi-robot coordinated lifting system is an unconstrained system with a rigid and flexible coupling.The deformation of the flexible rope causes errors in the movement trajectory of the lifting system.Based on the kinematic and dynamic analysis of the lifting system,the elastic catenary mod-el considering the elasticity and mass of the flexible rope is established,and the effect of the deform-ation of the flexible rope on the position and posture of the suspended object is analyzed.According to the deformation of flexible rope,a real-time trajectory compensation method is proposed based on the compensation principle of position and posture.Under the lifting task of the low-speed move-ment,this is compared with that of the system which neglects the deformation of the flexible rope.The trajectoy of the lifting system considering the deformation of flexible rope.The results show that the mass and elasticity of the flexible rope can not be neglected.Meanwhile,the proposed trajectory compensation method can improve the movement accuracy of the lifting system,which verifies the ef-fectiveness of this compensation method.The research results provide the basis for trajectory plan-ning and coordinated control of the lifting system。展开更多
Motion compensation is a key step for inverse synthetic aperture radar (ISAR) imaging. Many algorithms have been proposed. The rank one phase estimation (ROPE) algorithm is a good estimator for phase error widely used...Motion compensation is a key step for inverse synthetic aperture radar (ISAR) imaging. Many algorithms have been proposed. The rank one phase estimation (ROPE) algorithm is a good estimator for phase error widely used in SAR. The ROPE algorithm is used in ISAR phase compensation and the concrete implementation steps are presented. Subsequently, the performance of ROPE is analyzed. For ISAR data that fit the ROPE algorithm model, an excellent compensation effect can be obtained with high computation efficiency. Finally, ISAR real data are processed with ROPE and its imaging result is compared with that obtained by the modified Doppler centroid tracking (MDCT) method, which is a robust and good estimator in ISAR phase compensation.展开更多
Based on theoretical analysis and experiment, when the difference between the ropes length is ensured, the radius difference between the rope grooves and the difference of the rope strain of a double rope friction hoi...Based on theoretical analysis and experiment, when the difference between the ropes length is ensured, the radius difference between the rope grooves and the difference of the rope strain of a double rope friction hoist will decrease with the increasing of hoisting times. Then the rope grooves cutting are not needed. If the connection form of the ropes or the structure of the frictional wheel of a four ropes friction hoist are changed into as a double ropes hoists, the hoist rope grooves will not need to be cut as well, and the working time will be saved and the service life of the rope lining will be lengthened also.展开更多
This paper analyzes the reasons of the tension unbalance of the ropes in multi-rope fric-tion winder, introduces the method of an on-line monitoring rope tensions with a testing device de-veloped by authors, and propo...This paper analyzes the reasons of the tension unbalance of the ropes in multi-rope fric-tion winder, introduces the method of an on-line monitoring rope tensions with a testing device de-veloped by authors, and proposes the criteria of the fault diagnosis and the method of adjustment for the tension unbalance of the ropes, which is important to the theoretical study on the tension unbalance of the ropes and the maintenance of multi-rope winder.展开更多
A novel vibration isolation device called the nonlinear energy sink(NES)with NiTiNOL-steel wire ropes(NiTi-ST)is applied to a whole-spacecraft system.The NiTi-ST is used to describe the damping of the NES,which is cou...A novel vibration isolation device called the nonlinear energy sink(NES)with NiTiNOL-steel wire ropes(NiTi-ST)is applied to a whole-spacecraft system.The NiTi-ST is used to describe the damping of the NES,which is coupled with the modified Bouc-Wen model of hysteresis.The NES with NiTi-ST vibration reduction principle uses the irreversibility of targeted energy transfer(TET)to concentrate the energy locally on the nonlinear oscillator,and then dissipates it through damping in the NES with NiTi-ST.The generalized vibration transmissibility,obtained by the root mean square treatment of the harmonic response of the nonlinear output frequency response functions(NOFRFs),is first used as the evaluation index to analyze the whole-spacecraft system in the future.An optimization analysis of the impact of system responses is performed using different parameters of NES with NiTi-ST based on the transmissibility of NOFRFs.Finally,the effects of vibration suppression by varying the parameters of NiTi-ST are analyzed from the perspective of energy absorption.The results indicate that NES with NiTi-ST can reduce excessive vibration of the whole-spacecraft system,without changing its natural frequency.Moreover,the NES with NiTi-ST can be directly used in practical engineering applications.展开更多
Using ANSYS software, we developed a modeling program for several kinds of wire ropes with metal cores and built a geometric model for the 6×19 IWS wire rope. Through proper grid partitioning, a finite element mo...Using ANSYS software, we developed a modeling program for several kinds of wire ropes with metal cores and built a geometric model for the 6×19 IWS wire rope. Through proper grid partitioning, a finite element model for calculating the deforma-tion of wire rope was obtained. Completely constraining one end of the wire rope and applying an axial force to the other end, we established the boundary conditions for solving the model. In addition, we numerically simulated the stress and deformation of the wire, obtaining the deformation distribution of each wire within the wire rope under different laying directions. At the end, a tensile test of the 6×19 IWS wire rope was carried out and the results of simulation and experiment compared.展开更多
基金supported by the National Natural Science Foundation of China(Grant Nos.12375236 and 12135009)the Strategic Priority Research Program of the Chinese Academy of Sciences(Grant Nos.XDA25050100 and XDA25010100).
文摘The generation and reconnection of magneticflux ropes in a plasma irradiated by two Laguerre–Gaussian laser pulses with different frequen-cies and opposite topological charges are investigated numerically by particle-in-cell simulations.It is shown that twisted plasma currents and hence magneticflux ropes can be effectively generated as long as the laser frequency difference matches the electron plasma frequency.More importantly,subsequent reconnection of magneticflux ropes can occur.Typical signatures of magnetic reconnection,such as magnetic island formation and plasma heating,are identified in the reconnection of magneticflux ropes.Notably,it is found that a strong axial magneticfield can be generated on the axis,owing to the azimuthal current induced during the reconnection of the ropes.This indicates that in the reconnection of magneticflux ropes,the energy can be transferred not only from the magneticfield to the plasma but also from the plasma current back to the magneticfield.This work opens a new avenue to the study of magneticflux ropes,which helps in understanding magnetic topology changes,and resultant magnetic energy dissipation,plasma heating,and particle acceleration found in solarflares,and magnetic confinement fusion devices.
基金supported by the National Key Research and Development Program of China(No.2023YFC3010400)。
文摘The complex geometrical features of mechanical components significantly influence contact interactions and system dynamics.However,directly modeling contact forces on surfaces with intricate geometries presents considerable challenges.This study focuses on the helically twisted wire rope-sheave contact and proposes a contact force model that incorporates complex geometric features through a parameter identification approach.The model's impact on contact forces and system dynamics is thoroughly investigated.Leveraging a point contact model and an elliptic integral approximation,a loss function is formulated using the finite element(FE)contact model results as the reference data.Geometric parameters are subsequently determined by optimizing this loss function via a genetic algorithm(GA).The findings reveal that the contact stiffness increases with the wire rope pitch length,the radius of principal curvature,and the elliptic eccentricity of the contact zone.The proposed contact force model is integrated into a rigid-flexible coupled dynamics model,developed by the absolute node coordinate formulation,to examine the effects of contact geometry on system dynamics.The results demonstrate that the variations in wire rope geometry alter the contact stiffness,which in turn affects dynamic rope tension through frictional energy dissipation.The enhanced model's predictions exhibit superior alignment with the experimental data,thereby validating the methodology.This approach provides new insights for deducing the contact geometry from kinetic parameters and monitoring the performance degradation of mechanical components.
文摘In heavy-duty long-distance transmission scenarios,steel wire ropes are widely used due to their unique advantages,and their safety is very important,which has also led to the rapid development of non-destructive testing technology for steel wire ropes.The non-destructive testing technology for steel wire ropes is influenced by various factors such as its own structure and external working environment,and the testing process is relatively complex.Multiple testing methods and related types of sensors have also emerged.The electromagnetic detection method is currently the most effective method,but it also has its limitations in development and has not yet fully achieved the expected detection goals.In order to completely replace manual inspection work with the development of non-destructive testing technology for steel wire ropes,more in-depth research and long-term accumulation are still needed.
文摘Aimed at the long and narrow geometric features and poor generalization ability of the damage detection in conveyor belts with steel rope cores using the X-ray image,a detection method of damage X-ray image is proposed based on the improved fully convolutional one-stage object detection(FCOS)algorithm.The regression performance of bounding boxes was optimized by introducing the complete intersection over union loss function into the improved algorithm.The feature fusion network structure is modified by adding adaptive fusion paths to the feature fusion network structure,which makes full use of the features of accurate localization and semantics of multi-scale feature fusion networks.Finally,the network structure was trained and validated by using the X-ray image dataset of damages in conveyor belts with steel rope cores provided by a flaw detection equipment manufacturer.In addition,the data enhancement methods such as rotating,mirroring,and scaling,were employed to enrich the image dataset so that the model is adequately trained.Experimental results showed that the improved FCOS algorithm promoted the precision rate and the recall rate by 20.9%and 14.8%respectively,compared with the original algorithm.Meanwhile,compared with Fast R-CNN,Faster R-CNN,SSD,and YOLOv3,the improved FCOS algorithm has obvious advantages;detection precision rate and recall rate of the modified network reached 95.8%and 97.0%respectively.Furthermore,it demonstrated a higher detection accuracy without affecting the speed.The results of this work have some reference significance for the automatic identification and detection of steel core conveyor belt damage.
基金the National Natural Science Foundation of China(No.51965032)the Natural Science Foundation of Gansu Province of China(No.22JR5RA319)+1 种基金the Science and Technology Foundation of Gansu Province of China(No.21YF5WA060)the Excellent Doctoral Student Foundation of Gansu Province of China(No.23JRRA842).
文摘The multi-robot coordinated lifting system is an unconstrained system with a rigid and flexible coupling.The deformation of the flexible rope causes errors in the movement trajectory of the lifting system.Based on the kinematic and dynamic analysis of the lifting system,the elastic catenary mod-el considering the elasticity and mass of the flexible rope is established,and the effect of the deform-ation of the flexible rope on the position and posture of the suspended object is analyzed.According to the deformation of flexible rope,a real-time trajectory compensation method is proposed based on the compensation principle of position and posture.Under the lifting task of the low-speed move-ment,this is compared with that of the system which neglects the deformation of the flexible rope.The trajectoy of the lifting system considering the deformation of flexible rope.The results show that the mass and elasticity of the flexible rope can not be neglected.Meanwhile,the proposed trajectory compensation method can improve the movement accuracy of the lifting system,which verifies the ef-fectiveness of this compensation method.The research results provide the basis for trajectory plan-ning and coordinated control of the lifting system。
文摘Motion compensation is a key step for inverse synthetic aperture radar (ISAR) imaging. Many algorithms have been proposed. The rank one phase estimation (ROPE) algorithm is a good estimator for phase error widely used in SAR. The ROPE algorithm is used in ISAR phase compensation and the concrete implementation steps are presented. Subsequently, the performance of ROPE is analyzed. For ISAR data that fit the ROPE algorithm model, an excellent compensation effect can be obtained with high computation efficiency. Finally, ISAR real data are processed with ROPE and its imaging result is compared with that obtained by the modified Doppler centroid tracking (MDCT) method, which is a robust and good estimator in ISAR phase compensation.
文摘Based on theoretical analysis and experiment, when the difference between the ropes length is ensured, the radius difference between the rope grooves and the difference of the rope strain of a double rope friction hoist will decrease with the increasing of hoisting times. Then the rope grooves cutting are not needed. If the connection form of the ropes or the structure of the frictional wheel of a four ropes friction hoist are changed into as a double ropes hoists, the hoist rope grooves will not need to be cut as well, and the working time will be saved and the service life of the rope lining will be lengthened also.
文摘This paper analyzes the reasons of the tension unbalance of the ropes in multi-rope fric-tion winder, introduces the method of an on-line monitoring rope tensions with a testing device de-veloped by authors, and proposes the criteria of the fault diagnosis and the method of adjustment for the tension unbalance of the ropes, which is important to the theoretical study on the tension unbalance of the ropes and the maintenance of multi-rope winder.
基金Project supported by the National Natural Science Foundation of China(No.11772205)the Scientific Research Fund of Liaoning Provincial Education Department(No.L201703)+1 种基金the Liaoning Revitalization Talent Program(No.XLYC1807172)the Training Project of Liaoning Higher Education Institutions in Domestic and Overseas(No.2018LNGXGJWPY-YB008)
文摘A novel vibration isolation device called the nonlinear energy sink(NES)with NiTiNOL-steel wire ropes(NiTi-ST)is applied to a whole-spacecraft system.The NiTi-ST is used to describe the damping of the NES,which is coupled with the modified Bouc-Wen model of hysteresis.The NES with NiTi-ST vibration reduction principle uses the irreversibility of targeted energy transfer(TET)to concentrate the energy locally on the nonlinear oscillator,and then dissipates it through damping in the NES with NiTi-ST.The generalized vibration transmissibility,obtained by the root mean square treatment of the harmonic response of the nonlinear output frequency response functions(NOFRFs),is first used as the evaluation index to analyze the whole-spacecraft system in the future.An optimization analysis of the impact of system responses is performed using different parameters of NES with NiTi-ST based on the transmissibility of NOFRFs.Finally,the effects of vibration suppression by varying the parameters of NiTi-ST are analyzed from the perspective of energy absorption.The results indicate that NES with NiTi-ST can reduce excessive vibration of the whole-spacecraft system,without changing its natural frequency.Moreover,the NES with NiTi-ST can be directly used in practical engineering applications.
基金Project 07KJB430116 supported by the Natural Science Foundation of High University in Jiangsu Province
文摘Using ANSYS software, we developed a modeling program for several kinds of wire ropes with metal cores and built a geometric model for the 6×19 IWS wire rope. Through proper grid partitioning, a finite element model for calculating the deforma-tion of wire rope was obtained. Completely constraining one end of the wire rope and applying an axial force to the other end, we established the boundary conditions for solving the model. In addition, we numerically simulated the stress and deformation of the wire, obtaining the deformation distribution of each wire within the wire rope under different laying directions. At the end, a tensile test of the 6×19 IWS wire rope was carried out and the results of simulation and experiment compared.
