Benzoin condensation promoted efficiently in three imidazolium based room tempera- ture ionic liquids [bmim]Br, [bmim]BF4 and [Bnmim]BF4 is reported for the first time. Benzoins were obtained in up to 91% yield within...Benzoin condensation promoted efficiently in three imidazolium based room tempera- ture ionic liquids [bmim]Br, [bmim]BF4 and [Bnmim]BF4 is reported for the first time. Benzoins were obtained in up to 91% yield within less than 30 min under mild conditions.展开更多
The fluorination reaction involving a β-ketosulfones by Selectfluor^TM was efficiently promoted by the ionic liquid, [Hbim]BF4 （IL） as a reaction medium with methanol as co-solvent at room temperature under ultraso...The fluorination reaction involving a β-ketosulfones by Selectfluor^TM was efficiently promoted by the ionic liquid, [Hbim]BF4 （IL） as a reaction medium with methanol as co-solvent at room temperature under ultrasonic irradiation to afford the corresponding mono and difluoro-β-ketosulfones in excellent yields. The advantages of this method include among others the use of a recyclable, non-volatile ionic liquid, which promotes this protocol under room temperature without the requirement of any added catalyst under ultrasonic irradiation.展开更多
Stable silver nanoparticles was successfully synthesized by chemical reduction of silver nitrate in an ionic liquid,1-n-butyl-3-methylimidazolium tetrafluoroborate（[BMIM]·BF4） at room temperature.Results of UV-...Stable silver nanoparticles was successfully synthesized by chemical reduction of silver nitrate in an ionic liquid,1-n-butyl-3-methylimidazolium tetrafluoroborate（[BMIM]·BF4） at room temperature.Results of UV-Vis diffuse reflectance spectroscopy show as-prepared Ag nanoparticles exhibit a typical emission peak at 400―430 nm.By varying the reaction temperature and the precursor concentration,the size and the shape of the silver nanoparticles could be easily controlled under mild conditions.Analyses of transmission electron micrographs,X-ray diffraction pattern and X-ray photoelectron spectrum further reveal that the silver nanoparticles were coated incompletely by [BMIM]·BF4.Microbial experiments indicate that as-prepared silver nanoparticles show a wide spectrum of antimicrobial activities and have better antimicrobial activities to Pseudomonas aeruginosa than silver nitrate with the same concentration of silver.展开更多
In this work,we proposed a strategy for the hydrolysis of native corn starch after the treatment of corn starch in an ionic liquid aqueous solution,and it is an awfully“green”and simple means to obtain starch with l...In this work,we proposed a strategy for the hydrolysis of native corn starch after the treatment of corn starch in an ionic liquid aqueous solution,and it is an awfully“green”and simple means to obtain starch with low molecular weight and amorphous state.X-ray diffraction results revealed that the natural starch crystalline region was largely disrupted by ionic liquid owing to the broken intermolecular and intramolecular hydrogen bonds.After hydrolysis,the morphology of starch changed from particles of native corn starch into little pieces,and their molecular weight could be effectively regulated during the hydrolysis process,and also the hydrolyzed starch samples exhibited decreased thermal stability with the extension of hydrolysis time.This work would counsel as a powerful tool for the development of native starch in realistic applications.展开更多
Separation of 2-methylfuran(2-MF)and methanol(MeOH)azeotropes is a key challenge in biofuel production because of the efficiency and sustainability issues of conventional methods.In this study,ionic liquids(ILs)were i...Separation of 2-methylfuran(2-MF)and methanol(MeOH)azeotropes is a key challenge in biofuel production because of the efficiency and sustainability issues of conventional methods.In this study,ionic liquids(ILs)were introduced as green solvents for separation of 2-MF/MeOH through liquid–liquid equilibrium(LLE)experiment.Three ILs,namely 1-ethyl-3-methylimidazole dihydrogen phosphate([EMIM][H_(2)PO_(4)]),1-propyl-3-methylimidazole dihydrogen phosphate([PMIM][H_(2)PO_(4)])and 1-butyl-3-methylimidazole dihydrogen phosphate([BMIM][H_(2)PO_(4)]),were screened out from 425 candidates using the conductor-like screening model for real solvents(COSMO-RS).Then,the ternary LLE data of 2-MF(1)+MeOH(2)+ILs(3)were determined at 30℃ and 101.32 kPa.Results confirmed[EMIM][H_(2)PO_(4)]as the best performer,achieving a selectivity of 343.86 and a distribution coefficient of 36.66 for MeOH—significantly higher than[PMIM][H_(2)PO_(4)]and[BMIM][H_(2)PO_(4)].The accuracy of the LLE data was verified by Othmer–Tobias and Hand equations(R^(2)>0.90).The non-random two liquid model was used to correlate the experimental data(RMSD<2%).Besides,the combination of electrostatic surfaces potential,independent gradient model based on Hirshfeld partition,mean square displacement and radial distribution functions revealed strong electrostatic interactions between[H_(2)PO_(4)]^(–) and MeOH.Interaction energy analysis further emphasizes the mechanism of MeOH separation from a mixture of 2-MF and MeOH by ILs.This work provides a multiscale strategy for the separation of 2-MF and MeOH azeotropes,highlighting the potential of ILs to improve biofuel purification while reducing energy and environmental costs.展开更多
As the global textile industry has accelerated its transition to a circular economy,iterative innovation in regenerated cellulose fibers has become a key industry focus.With viscose fiber having been industrialized fo...As the global textile industry has accelerated its transition to a circular economy,iterative innovation in regenerated cellulose fibers has become a key industry focus.With viscose fiber having been industrialized for over a century and lyocell fiber gaining market recognition because of its environmentally friendly process,which is the next regenerated cellulose fiber.Herein,ionic liquids with low vapor pressure,nonflammability,relatively simple recovery,and high dissolution efficiency were used to fabricate regenerated cellulose fibers.The viscose and lyocell properties of the fibers were systematically compared,including microscopic morphology,dyeing behavior,fibrillation resistance,mechanical properties,yarn-forming capacity,and fabric performance.The ionic liquid(IL)fiber exhibited a smooth surface and circular cross-section,with the highest tensile strength,moderate dyeing and fibrillation properties,and similar spinning and weaving performance.This work can provide a reference for the commercial application of regenerated cellulose fibers fabricated from ionic liquid.展开更多
The preparation of ionic liquid gel electrolyte can reduce the occurrence of side effects and extend battery life.In the DMSO-ILZE electrolyte composed of DMSO,1-ethyl-3-methylimidazole tetrafluoroborate(EMIMBF_(4))an...The preparation of ionic liquid gel electrolyte can reduce the occurrence of side effects and extend battery life.In the DMSO-ILZE electrolyte composed of DMSO,1-ethyl-3-methylimidazole tetrafluoroborate(EMIMBF_(4))and Zn(BF_(4))_(2),the supramolecular gelatorβ-cyclodextrin(β-CD)was added,and then a gel electrolyte(CD-ILZE)for zinc-ion batteries was prepared through host-vip interaction betweenβ-CD and DMSO-ILZE electrolyte.The gel electrolyte has good conductivity between-30 and 80℃,which is found by fitting the Arrhenius equation that the gel electrolyte satisfies the liquid law within this temperature range.In addition,the supramolecular gel electrolyte can effectively decrease hydrogen evolution corrosion and the formation of zinc dendrites.Compared with the battery prepared by DMSO-ILZE electrolyte(about 1100 h),the prepared Zn||Zn battery exhibits a more stable cycle(over 2800 h)at a current density of 0.5 m A·cm^(-2).At 0.1 A·g^(-1),the prepared Zn||V_(2)O_(5)gel electrolyte cell has a capacity of 30 m Ah·g^(-1)and a capacity retention rate of 85.17%after more than 1500 cycles.The CD-ILZE supramolecular gel electrolyte can inhibit the formation of hydrogen evolution corrosion and zinc dendrites,and improve the cycling performance of the battery.展开更多
Porous ionic liquid electrospray thrusters are the ideal propulsion technology for CubeSats because of their structural simplicity,high thrust accuracy and plume self-neutralization.The electrowetting technology can r...Porous ionic liquid electrospray thrusters are the ideal propulsion technology for CubeSats because of their structural simplicity,high thrust accuracy and plume self-neutralization.The electrowetting technology can replenish the propellant for the emitter online,thus prolonging the lifetime of the thruster.In order to gain a deeper understanding of its operating characteristics,the changes in thruster performance before and after propellant replenishment deserve to be scrutinized.In this study,the performance changes of a porous electrowetting ionic liquid electrospray thruster are tested by voltage-current test and time-of-flight mass spectrometry over a long operating time.The experimental results show that asymmetric operation with a negative current less than positive current for a long period of time causes anions to compensate for the emission after accumulation at the emitter,resulting in a phenomenon that the negative current is much larger than positive current.The reason for the difference in emission characteristics between the positive and negative modes is that the plume in the positive mode is quite ionized while the plume in the negative mode contains liquid droplets.This study provides a reference for the selection of operating conditions for ionic liquid electrospray thrusters.展开更多
The synthesis of propylene carbonate(PC)from CO_(2) and propylene oxide(PO)is a typical gas-liquid biphasic system,where gas-liquid mass transfer efficiency significantly influences CO_(2) cycloaddition reactions.Here...The synthesis of propylene carbonate(PC)from CO_(2) and propylene oxide(PO)is a typical gas-liquid biphasic system,where gas-liquid mass transfer efficiency significantly influences CO_(2) cycloaddition reactions.Here,we proposed a microchannel reaction system for the CO_(2) cycloaddition reaction catalyzed by ionic liquid within an aqueous environment.The effect of liquid flow rate,temperature and residence time on gas-liquid flow pattern,catalytic performance and mass transfer were systematically investigated.The results revealed that the PC generation rate reached 560.11 mmol·ml^(−1)·h^(−1)at a 50 cm of flow distance under reaction conditions of 105℃,2.5 MPa,QG=176 ml·min^(−1) and QL=0.3 ml·min^(−1).Variations in mass transfer rate and reaction rate at different flow distances were experimentally studied.The reaction efficiency gradually decreased with increasing flow distance,which were attributed to the reduction of mass transfer caused by decreasing bubble velocity.Optimizing bubble velocity at an appropriate position enhanced reaction efficiency by improving mass transfer,achieving a 97.7%PC yield within 2.85 min.Furthermore,a kinetic model coupling intrinsic kinetics with gas-liquid mass transfer was developed for CO_(2) cycloaddition reaction.The kinetic model was applied to predict PC reaction rates in microchannel reactors at various temperatures and liquid flow rates,achieving an average relative error of 9.6%.展开更多
The practical application of lithium metal batteries(LMBs)requires electrolytes that simultaneously ensure high safety and interfacial stability.Although locally concentrated ionic liquid electrolytes(LCILEs)exhibit e...The practical application of lithium metal batteries(LMBs)requires electrolytes that simultaneously ensure high safety and interfacial stability.Although locally concentrated ionic liquid electrolytes(LCILEs)exhibit exceptional electrochemical stability and compatibility with electrode electrolyte interfaces(EEIs),two major challenges persist:(i)safety risks caused by excessive low-flash-point diluents,and(ii)insufficient understanding of how diluents modulate solvation structures.Herein,we introduce a low-diluent-content LCILE system composed of lithium bis(fluorosulfonyl)imide(LiFSI)salt,N-methyl-N-propyl-pyrrolidinium bis(fluorosulfonyl)imide(Pyr_(13)FSI)ionic liquid,and trifluoromethanesulfonate(TFS)diluent.The TFS diluent strengthens ion-ion interactions by lowering the dielectric constant of the electrolyte,resulting in the formation of a unique nanometric anion aggregates(N-AGGs)reinforced solvation structure.These large anionic clusters exhibit accelerated redox decomposition kinetics,facilitating the rapid formation of a thin,dense,and low-impedance EEI.Consequently,the Li/LiNi_(0.6)Co_(0.2)Mn_(0.2)O_(2)coin cell achieves 87.8%capacity retention over 300 cycles at 4.3 V,while a practical 1.4 Ah Li/NCM622 pouch cell retains 84.5%capacity after 80 cycles at 4.5 V.Furthermore,the electrolyte demonstrates exceptional safety,and 2 Ah Li metal pouch cells successfully pass rigorous nail penetration tests without any ignition or explosion.This work not only provides a design strategy for intrinsically safe and high-performance electrolytes but also highlights the critical role of anion cluster decomposition kinetics in shaping EEI formation.展开更多
The unique physical and chemical properties of room-temperature ionic liquids(RTILs) have recently received increasing attention as solvent alternatives for possible application in the field of nuclear industry, parti...The unique physical and chemical properties of room-temperature ionic liquids(RTILs) have recently received increasing attention as solvent alternatives for possible application in the field of nuclear industry, particularly in liquid-liquid separations of radioactive nuclides. We investigated solvent extraction of U(VI) from aqueous solutions into a commonly used ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide([C4mim][NTf2]) using trioctylphosphine oxide(TOPO) as an extractant. The effects of contact time, TOPO concentration, acidity, and nitrate ions on the U(VI) extraction are discussed in detail. The extraction mechanism was proposed based on slope analysis and UV-Vis measurement. The results clearly show that TOPO/[C4mim][NTf2] provides a highly efficient extraction of U(VI) from aqueous solution under near-neutral conditions. When the TOPO concentration was 10 mmol/L, the extraction of 1 mmol/L U(VI) was almost complete(> 97%). Both the extraction efficiency and distribution coefficient were much larger than in conventional organic solvents such as dichloromethane. Slope analysis confirmed that three TOPO molecules in [C4mim][NTf2] bound with one U(VI) ion and one nitrate ion was also involved in the complexation and formed the final extracted species of [UO2(NO3)(TOPO)3]+. Such a complex suggests that extraction occurs by a cation-exchange mode, which was subsequently evidenced by the fact that the concentration of C4mim+ in the aqueous phase increased linearly with the extraction percent of U(VI) recorded by UV-Vis measurement.展开更多
Ionic Liquid Electrospray Thrusters(ILETs)are well suited for micro-nano satellite applications due to their small size,low power consumption,and high specific impulse.However,the limited thrust of a single-emitter IL...Ionic Liquid Electrospray Thrusters(ILETs)are well suited for micro-nano satellite applications due to their small size,low power consumption,and high specific impulse.However,the limited thrust of a single-emitter ILET restricts its use in space missions.To optimize the performance of ILETs and make them suitable for a wider range of space missions,we designed a Circular-emitter ILET(CILET)to convert a one-dimensional(point)emission into a twodimensional(line)emission.The CILET can self-organize multiple Taylor cones simultaneously.The cones were photographed and the axial emission currents were measured under different voltage and pressure difference conditions with a CILET experimental system.The emission can be divided into two stable states and one unstable state based on the flow and current characteristics.The current in Stable state Ⅰ increases non-linearly with the voltage,while that in Stable state Ⅱ is nearly linear with respect to the voltage.The number of cones increases with the voltage in stable states,while the cones become short and crowded under high-voltage conditions.The variation law of the number of cones can be explained with the self-organization theory.The variation in the current exhibits a good correlation with the number of cones.This study demonstrates the feasibility of circular emitters and experimentally indicates that the emission current is improved by approximately two orders of magnitude compared to that of a single capillary.展开更多
Developing efficient and stable non-precious metal catalysts is essential for replacing platinum-based catalysts in polymer electrolyte membrane fuel cells(PEMFCs).The transition metal and nitrogen co-doped carbon ele...Developing efficient and stable non-precious metal catalysts is essential for replacing platinum-based catalysts in polymer electrolyte membrane fuel cells(PEMFCs).The transition metal and nitrogen co-doped carbon electrocatalyst(M-N-C)is considered an effective alternative to precious metal catalysts.However,its relatively poor performance in acidic environments has always been a problem plaguing its practical application in PEMFCs.This study presents a sequential deposition methodology for constructing a composite catalytic system of Fe-N-C and ionic liquid(IL),which exhibits improved performance at both half-cell and membrane electrode assembly scales.The presence of IL significantly inhibits H_(2)O_(2)production,preferentially promoting the 4e–O_(2)reduction reaction,resulting in improved electrocatalytic activity and stability.Additionally,the enhanced PEMFC performance of IL containing electrodes is a direct result of the improved ionic and reactant accessibility of the pore confined Fe-N-C catalysts where the IL minimizes local resistive transport losses.This study establishes a strategic foundation for the practical utilization of non-precious metal catalysts in PEMFCs and other energy converting technologies.展开更多
Carbon dioxide accounts for about 80 percent of greenhouse emissions and the increasing CO_(2)emission has been identified as a critical environmental issue.On the other hand,CO_(2)is a potentially renewable resource ...Carbon dioxide accounts for about 80 percent of greenhouse emissions and the increasing CO_(2)emission has been identified as a critical environmental issue.On the other hand,CO_(2)is a potentially renewable resource of a single carbon molecule,and new technologies to utilize CO_(2)in producing net-zero fuels and chemicals are of global interest.Great efforts have been made in the development of new materials and processes for CO_(2)capture and utilization(CCU).Among them,ionic liquids(ILs)have attracted much attention due to their unique characteristics such as high CO_(2)solubility,high ionic conductivity,negligible volatility,non-flammability,wide electrochemical window,and high thermal stability,as well as good solvation ability.This review summarizes the most recent efforts devoted to IL-based absorption,catalysts,and CO_(2)capture and utilization processes.We discuss the factors that affect the interaction between ILs and CO_(2),impacting on the viscosity and CO_(2)solubility and preview the coupling of CO_(2)capture with electrochemical conversion of CO_(2).Finally,we provide an overview on the advantages and disadvantages of the IL-based process for practical applications.展开更多
Small-sized Cd_(x) Zn_(1-x) S solid solution nanomaterial is an important candidate for efficient photocatalytic hydrogen evolution(PHE),but it still suffers from easy agglomeration,severe photo corrosion,and fast pho...Small-sized Cd_(x) Zn_(1-x) S solid solution nanomaterial is an important candidate for efficient photocatalytic hydrogen evolution(PHE),but it still suffers from easy agglomeration,severe photo corrosion,and fast photogenerated electron-hole recombination.To tackle these issues,herein,we propose a new strategy to modify Cd_(x) Zn_(1-x) S nanoreactors by the simultaneous utilization of ionic-liquid-assisted morphology engineering and MXene-incorporating method.That is,we designed and synthesized a novel hierarchi-cal Cd_(0.8) Zn_(0.2) S/Ti_(3) C_(2) Schottky junction composite through the in-situ deposition of ultrathin Cd_(0.8) Zn_(0.2) S nanosheets on unique IL-modified Ti_(3) C_(2) MXenes by a one-pot solvothermal method for efficiently PHE.The unique construction strategy tailors the thickness of ultrathin Cd_(0.8) Zn_(0.2) S nanosheets and prevents them from stacking and agglomeration,and especially,optimizes their charge transfer pathways during the photocatalytic process.Compared with pristine Cd_(0.8) Zn_(0.2) S nanosheets,Cd_(0.8) Zn_(0.2) S/Ti_(3) C_(2) has abun-dant photogenerated electrons available on the Ti_(3) C_(2) surface for proton reduction reaction,owing to the absence of deep-trapped electrons,suppression of electron-hole recombination in Cd_(0.8) Zn_(0.2) S and high-efficiency charge separation at the Cd_(0.8) Zn_(0.2) S/Ti_(3) C_(2) Schottky junction interface.Moreover,the hy-drophilicity,electrical conductivity,visible-light absorption capacity,and surficial hydrogen desorption of Cd_(0.8) Zn_(0.2) S/Ti_(3) C_(2) heterostructure are significantly improved.As a result,the heterostructure exhibits out-standing photocatalytic stability and super high apparent quantum efficiency,being rendered as one of the best noble-metal-free Cd-Zn-S-based photocatalysts.This work illustrates the mechanisms of mor-phology control and heterojunction construction in controlling the catalytic behavior of photocatalysts and highlights the great potential of the IL-assisted route in the synthesis of high-performance MXene-based heterostructures for photocatalytic hydrogen evolution.展开更多
Removing H_(2)S and CO_(2)is of great significance for natural gas purification.With excellent gas affinity and tunable structure,ionic liquids(ILs) have been regarded as nontrivial candidates for fabricating polymer-...Removing H_(2)S and CO_(2)is of great significance for natural gas purification.With excellent gas affinity and tunable structure,ionic liquids(ILs) have been regarded as nontrivial candidates for fabricating polymer-based membranes.Herein,we firstly reported the incorporation of protic ILs (PILs) having ether-rich and carboxylate sites (ECPILs) into poly(ether-block-amide)(Pebax) matrix for efficient separation H_(2)S and CO_(2)from CH_(4).Notably,the optimal permeability of H_(2)S reaches up to 4310 Barrer (40C,0.50 bar) in Pebax/ECPIL membranes,along with H_(2)S/CH_(4)and (H_(2)StCO_(2))/CH_(4)selectivity of 97.7 and 112.3,respectively.These values are increased by 1125%,160.8%and 145.9%compared to those in neat Pebax membrane.Additionally,the solubility and diffusion coefficients of the gases were measured,demonstrating that ECPIL can simultaneously strengthen the dissolution and diffusion of H_(2)S and CO_(2),thus elevating the permeability and permselectivity.By using quantum chemical calculations and FT-IR spectroscopy,the highly reversible multi-site hydrogen bonding interaction between ECPILs and H_(2)S was revealed,which is responsible for the fast permeation of H_(2)S and good selectivity.Furthermore,H_(2)S/CO_(2)/CH_(4)(3/3/94 mol/mol) ternary mixed gas can be efficiently and stably separated by Pebax/ECPIL membrane for at least 100 h.Overall,this work not only illustrates that PILs with ether-rich and carboxylate hydrogen bonding sites are outstanding materials for simultaneous removal of H_(2)S and CO_(2),but may also provide a novel insight into the design of membrane materials for natural gas upgrading.展开更多
We introduce our state-of-the art of“vacuum consistent electrochemistry”to an investigation of the interfaces between oxides and ionic liquid(IL).Pulsed laser deposition(PLD)has been one of the powerful and sophisti...We introduce our state-of-the art of“vacuum consistent electrochemistry”to an investigation of the interfaces between oxides and ionic liquid(IL).Pulsed laser deposition(PLD)has been one of the powerful and sophisticated techniques to realize nanoscale preparation of high-quality epitaxial oxide thin films.On the other hand,electrochemistry is a simple,very sensitive,and non-destructive analysis technique for solid-liquid interfaces.To ensure the reproducibility in experiment of the interfaces of such epitaxial oxide films,as well as bulk oxide single-crystals,with IL,we employ a home-built PLD-electrochemical(EC)system with IL as an electrolyte.The system allows one to perform all-in-vacuum experiments during the preparation of well-defined oxide electrode surfaces to their electrochemical analyses.The topics include electrochemical evaluations of the oxide’s own properties,such as carrier density and relative permittivity,and the interfacial properties of oxides in contact with IL,such as flat band potential and electric double layer(EDL)capacitance,ending with future perspectives in all-solid-state electrochemistry.展开更多
A series of multi-hydroxyl bis-(quaternary ammonium)ionic liquids(Ils1‒7)was prepared as bifunctional catalysts for the chemical fixation of CO_(2).All these ionic liquid compounds were efficient for the catalytic syn...A series of multi-hydroxyl bis-(quaternary ammonium)ionic liquids(Ils1‒7)was prepared as bifunctional catalysts for the chemical fixation of CO_(2).All these ionic liquid compounds were efficient for the catalytic synthesis of cyclic carbonates and oxazolidinones via the cycloaddition reactions between CO_(2) and epoxides or aziridines with excellent yield and high selectivity in the absence of co-catalyst,metal and solvent.Due to the synergistic effects of hydroxyl groups and halogen anion,the cycloaddition reactions proceeded smoothly either at atmospheric pressure or room temperature.The selectivity for substituted oxazolidinones at 5-and 4-positions can be tuned via changing the reaction conditions.Finally,possible mechanisms including the activation of both CO_(2) and epoxide or aziridines were proposed based on the literatures and experimental results.展开更多
The development of highly active catalyst in pH-neutral media for oxygen evolution reaction(OER)is critical in the field of renewable energy storage and conversion.Nevertheless,the slow kinetics of proton-coupled elec...The development of highly active catalyst in pH-neutral media for oxygen evolution reaction(OER)is critical in the field of renewable energy storage and conversion.Nevertheless,the slow kinetics of proton-coupled electron transfer(PCET)hinders the overall OER efficiency.Herein,we report an ionic liquid(IL)modified CoSn(OH)_(6)nanocubes(denoted as CoS-n(OH)_(6)-IL),which could be prepared through a facile strategy.The modified IL would not change the structural character-istics of CoSn(OH)_(6),but could effectively regulate the local proton activity near the active sites.The CoSn(OH)_(6)-IL exhibited higher intrinsic OER performances than the pristine CoSn(OH)_(6)in neutral media.For example,the current density of CoS-n(OH)_(6)-IL at 1.8 V versus reversible hydrogen electrode(RHE)was about 4 times higher than that of CoSn(OH)_(6).According to the pH-dependent kinetic investigations,operando electrochemical impedance spectroscopic,chemical probe tests,and deuterium kinetic isotope effects,the interfacial layer of IL could be utilized as a proton transfer mediator to promote the proton transfer,which enhances the surface coverage of OER intermediates and reduces the activation barrier.Consequent-ly,the sluggish OER kinetics would be efficiently accelerated.This study provides a facile and effective strategy to facilitate the PCET processes and is beneficial to guide the rational design of OER electrocatalysts.展开更多
基金We thank the financial support from the National Natural Science Foundation of China.(No.20172038)
文摘Benzoin condensation promoted efficiently in three imidazolium based room tempera- ture ionic liquids [bmim]Br, [bmim]BF4 and [Bnmim]BF4 is reported for the first time. Benzoins were obtained in up to 91% yield within less than 30 min under mild conditions.
文摘The fluorination reaction involving a β-ketosulfones by Selectfluor^TM was efficiently promoted by the ionic liquid, [Hbim]BF4 （IL） as a reaction medium with methanol as co-solvent at room temperature under ultrasonic irradiation to afford the corresponding mono and difluoro-β-ketosulfones in excellent yields. The advantages of this method include among others the use of a recyclable, non-volatile ionic liquid, which promotes this protocol under room temperature without the requirement of any added catalyst under ultrasonic irradiation.
文摘Stable silver nanoparticles was successfully synthesized by chemical reduction of silver nitrate in an ionic liquid,1-n-butyl-3-methylimidazolium tetrafluoroborate（[BMIM]·BF4） at room temperature.Results of UV-Vis diffuse reflectance spectroscopy show as-prepared Ag nanoparticles exhibit a typical emission peak at 400―430 nm.By varying the reaction temperature and the precursor concentration,the size and the shape of the silver nanoparticles could be easily controlled under mild conditions.Analyses of transmission electron micrographs,X-ray diffraction pattern and X-ray photoelectron spectrum further reveal that the silver nanoparticles were coated incompletely by [BMIM]·BF4.Microbial experiments indicate that as-prepared silver nanoparticles show a wide spectrum of antimicrobial activities and have better antimicrobial activities to Pseudomonas aeruginosa than silver nitrate with the same concentration of silver.
文摘In this work,we proposed a strategy for the hydrolysis of native corn starch after the treatment of corn starch in an ionic liquid aqueous solution,and it is an awfully“green”and simple means to obtain starch with low molecular weight and amorphous state.X-ray diffraction results revealed that the natural starch crystalline region was largely disrupted by ionic liquid owing to the broken intermolecular and intramolecular hydrogen bonds.After hydrolysis,the morphology of starch changed from particles of native corn starch into little pieces,and their molecular weight could be effectively regulated during the hydrolysis process,and also the hydrolyzed starch samples exhibited decreased thermal stability with the extension of hydrolysis time.This work would counsel as a powerful tool for the development of native starch in realistic applications.
基金supported by the National Natural Science Foundation of China(22278272)Natural Science Foundation of Liaoning Province(2024-MS-129).
文摘Separation of 2-methylfuran(2-MF)and methanol(MeOH)azeotropes is a key challenge in biofuel production because of the efficiency and sustainability issues of conventional methods.In this study,ionic liquids(ILs)were introduced as green solvents for separation of 2-MF/MeOH through liquid–liquid equilibrium(LLE)experiment.Three ILs,namely 1-ethyl-3-methylimidazole dihydrogen phosphate([EMIM][H_(2)PO_(4)]),1-propyl-3-methylimidazole dihydrogen phosphate([PMIM][H_(2)PO_(4)])and 1-butyl-3-methylimidazole dihydrogen phosphate([BMIM][H_(2)PO_(4)]),were screened out from 425 candidates using the conductor-like screening model for real solvents(COSMO-RS).Then,the ternary LLE data of 2-MF(1)+MeOH(2)+ILs(3)were determined at 30℃ and 101.32 kPa.Results confirmed[EMIM][H_(2)PO_(4)]as the best performer,achieving a selectivity of 343.86 and a distribution coefficient of 36.66 for MeOH—significantly higher than[PMIM][H_(2)PO_(4)]and[BMIM][H_(2)PO_(4)].The accuracy of the LLE data was verified by Othmer–Tobias and Hand equations(R^(2)>0.90).The non-random two liquid model was used to correlate the experimental data(RMSD<2%).Besides,the combination of electrostatic surfaces potential,independent gradient model based on Hirshfeld partition,mean square displacement and radial distribution functions revealed strong electrostatic interactions between[H_(2)PO_(4)]^(–) and MeOH.Interaction energy analysis further emphasizes the mechanism of MeOH separation from a mixture of 2-MF and MeOH by ILs.This work provides a multiscale strategy for the separation of 2-MF and MeOH azeotropes,highlighting the potential of ILs to improve biofuel purification while reducing energy and environmental costs.
基金financially supported by the National Natural Science Foundation of China(Nos.22005226 and 52203124)Center for Carbon Neutral Chemistry,Institute of Chemistry,Chinese Academy of Sciences(No.CCNC-202402)+1 种基金the Basic and Advanced Research Project from Wuhan Science and Technology Bureau(No.2022013988065201)Hubei Integrative Technology and Innovation Center for Advanced Fiberous Materials,project(No.XC2024G3013)。
文摘As the global textile industry has accelerated its transition to a circular economy,iterative innovation in regenerated cellulose fibers has become a key industry focus.With viscose fiber having been industrialized for over a century and lyocell fiber gaining market recognition because of its environmentally friendly process,which is the next regenerated cellulose fiber.Herein,ionic liquids with low vapor pressure,nonflammability,relatively simple recovery,and high dissolution efficiency were used to fabricate regenerated cellulose fibers.The viscose and lyocell properties of the fibers were systematically compared,including microscopic morphology,dyeing behavior,fibrillation resistance,mechanical properties,yarn-forming capacity,and fabric performance.The ionic liquid(IL)fiber exhibited a smooth surface and circular cross-section,with the highest tensile strength,moderate dyeing and fibrillation properties,and similar spinning and weaving performance.This work can provide a reference for the commercial application of regenerated cellulose fibers fabricated from ionic liquid.
文摘The preparation of ionic liquid gel electrolyte can reduce the occurrence of side effects and extend battery life.In the DMSO-ILZE electrolyte composed of DMSO,1-ethyl-3-methylimidazole tetrafluoroborate(EMIMBF_(4))and Zn(BF_(4))_(2),the supramolecular gelatorβ-cyclodextrin(β-CD)was added,and then a gel electrolyte(CD-ILZE)for zinc-ion batteries was prepared through host-vip interaction betweenβ-CD and DMSO-ILZE electrolyte.The gel electrolyte has good conductivity between-30 and 80℃,which is found by fitting the Arrhenius equation that the gel electrolyte satisfies the liquid law within this temperature range.In addition,the supramolecular gel electrolyte can effectively decrease hydrogen evolution corrosion and the formation of zinc dendrites.Compared with the battery prepared by DMSO-ILZE electrolyte(about 1100 h),the prepared Zn||Zn battery exhibits a more stable cycle(over 2800 h)at a current density of 0.5 m A·cm^(-2).At 0.1 A·g^(-1),the prepared Zn||V_(2)O_(5)gel electrolyte cell has a capacity of 30 m Ah·g^(-1)and a capacity retention rate of 85.17%after more than 1500 cycles.The CD-ILZE supramolecular gel electrolyte can inhibit the formation of hydrogen evolution corrosion and zinc dendrites,and improve the cycling performance of the battery.
基金co-supported by the National Key R&D Program of China(Nos.2020YFC2201103 and 2022YFB4601300)the National Natural Science Foundation of China(No.U22B20120)+1 种基金the Program of Beijing Engineering Research Center of Efficient and Green Aerospace Propulsion Technology,China(No.Lab ASP-2024-09)the Beijing Institute of Technology Research Fund Program for Young Scholars,China。
文摘Porous ionic liquid electrospray thrusters are the ideal propulsion technology for CubeSats because of their structural simplicity,high thrust accuracy and plume self-neutralization.The electrowetting technology can replenish the propellant for the emitter online,thus prolonging the lifetime of the thruster.In order to gain a deeper understanding of its operating characteristics,the changes in thruster performance before and after propellant replenishment deserve to be scrutinized.In this study,the performance changes of a porous electrowetting ionic liquid electrospray thruster are tested by voltage-current test and time-of-flight mass spectrometry over a long operating time.The experimental results show that asymmetric operation with a negative current less than positive current for a long period of time causes anions to compensate for the emission after accumulation at the emitter,resulting in a phenomenon that the negative current is much larger than positive current.The reason for the difference in emission characteristics between the positive and negative modes is that the plume in the positive mode is quite ionized while the plume in the negative mode contains liquid droplets.This study provides a reference for the selection of operating conditions for ionic liquid electrospray thrusters.
基金supported by the National Key Projects for Fundamental Research and development of China(2020YFA0710202)the China Postdoctoral Science Foundation(2024M761567)Shandong Postdoctoral Science Foundation(SDCX-ZG-202400271).
文摘The synthesis of propylene carbonate(PC)from CO_(2) and propylene oxide(PO)is a typical gas-liquid biphasic system,where gas-liquid mass transfer efficiency significantly influences CO_(2) cycloaddition reactions.Here,we proposed a microchannel reaction system for the CO_(2) cycloaddition reaction catalyzed by ionic liquid within an aqueous environment.The effect of liquid flow rate,temperature and residence time on gas-liquid flow pattern,catalytic performance and mass transfer were systematically investigated.The results revealed that the PC generation rate reached 560.11 mmol·ml^(−1)·h^(−1)at a 50 cm of flow distance under reaction conditions of 105℃,2.5 MPa,QG=176 ml·min^(−1) and QL=0.3 ml·min^(−1).Variations in mass transfer rate and reaction rate at different flow distances were experimentally studied.The reaction efficiency gradually decreased with increasing flow distance,which were attributed to the reduction of mass transfer caused by decreasing bubble velocity.Optimizing bubble velocity at an appropriate position enhanced reaction efficiency by improving mass transfer,achieving a 97.7%PC yield within 2.85 min.Furthermore,a kinetic model coupling intrinsic kinetics with gas-liquid mass transfer was developed for CO_(2) cycloaddition reaction.The kinetic model was applied to predict PC reaction rates in microchannel reactors at various temperatures and liquid flow rates,achieving an average relative error of 9.6%.
基金supported by the National Key R&D Program of China(Grant No.2022YFE0207300)the National Natural Science Foundation of China(Grant Nos.22179142 and 22075314)+1 种基金Jiangsu Provincial Science and Technology Program(Grant No.BG 2024020).XPSWAXS and TOF-SIMS characterizations were supported by Nano-X(Vacuum Interconnected Nanotech Workstation,Suzhou Institute of Nano-Tech and Nano-Bionics,Chinese Academy of Sciences(SINANO),Suzhou 215123,China)。
文摘The practical application of lithium metal batteries(LMBs)requires electrolytes that simultaneously ensure high safety and interfacial stability.Although locally concentrated ionic liquid electrolytes(LCILEs)exhibit exceptional electrochemical stability and compatibility with electrode electrolyte interfaces(EEIs),two major challenges persist:(i)safety risks caused by excessive low-flash-point diluents,and(ii)insufficient understanding of how diluents modulate solvation structures.Herein,we introduce a low-diluent-content LCILE system composed of lithium bis(fluorosulfonyl)imide(LiFSI)salt,N-methyl-N-propyl-pyrrolidinium bis(fluorosulfonyl)imide(Pyr_(13)FSI)ionic liquid,and trifluoromethanesulfonate(TFS)diluent.The TFS diluent strengthens ion-ion interactions by lowering the dielectric constant of the electrolyte,resulting in the formation of a unique nanometric anion aggregates(N-AGGs)reinforced solvation structure.These large anionic clusters exhibit accelerated redox decomposition kinetics,facilitating the rapid formation of a thin,dense,and low-impedance EEI.Consequently,the Li/LiNi_(0.6)Co_(0.2)Mn_(0.2)O_(2)coin cell achieves 87.8%capacity retention over 300 cycles at 4.3 V,while a practical 1.4 Ah Li/NCM622 pouch cell retains 84.5%capacity after 80 cycles at 4.5 V.Furthermore,the electrolyte demonstrates exceptional safety,and 2 Ah Li metal pouch cells successfully pass rigorous nail penetration tests without any ignition or explosion.This work not only provides a design strategy for intrinsically safe and high-performance electrolytes but also highlights the critical role of anion cluster decomposition kinetics in shaping EEI formation.
基金supported by the National Natural Science Foundation of China(91326202,11105162,91126006,11275219)the Strategic Priority Research Program of the Chinese Academy of Sciences(XDA030104)
文摘The unique physical and chemical properties of room-temperature ionic liquids(RTILs) have recently received increasing attention as solvent alternatives for possible application in the field of nuclear industry, particularly in liquid-liquid separations of radioactive nuclides. We investigated solvent extraction of U(VI) from aqueous solutions into a commonly used ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide([C4mim][NTf2]) using trioctylphosphine oxide(TOPO) as an extractant. The effects of contact time, TOPO concentration, acidity, and nitrate ions on the U(VI) extraction are discussed in detail. The extraction mechanism was proposed based on slope analysis and UV-Vis measurement. The results clearly show that TOPO/[C4mim][NTf2] provides a highly efficient extraction of U(VI) from aqueous solution under near-neutral conditions. When the TOPO concentration was 10 mmol/L, the extraction of 1 mmol/L U(VI) was almost complete(> 97%). Both the extraction efficiency and distribution coefficient were much larger than in conventional organic solvents such as dichloromethane. Slope analysis confirmed that three TOPO molecules in [C4mim][NTf2] bound with one U(VI) ion and one nitrate ion was also involved in the complexation and formed the final extracted species of [UO2(NO3)(TOPO)3]+. Such a complex suggests that extraction occurs by a cation-exchange mode, which was subsequently evidenced by the fact that the concentration of C4mim+ in the aqueous phase increased linearly with the extraction percent of U(VI) recorded by UV-Vis measurement.
基金co-supported by the National Key R&D Program of China(No.2020YFC2201001)the Shenzhen Science and Technology Program,China(No.20210623091808026)。
文摘Ionic Liquid Electrospray Thrusters(ILETs)are well suited for micro-nano satellite applications due to their small size,low power consumption,and high specific impulse.However,the limited thrust of a single-emitter ILET restricts its use in space missions.To optimize the performance of ILETs and make them suitable for a wider range of space missions,we designed a Circular-emitter ILET(CILET)to convert a one-dimensional(point)emission into a twodimensional(line)emission.The CILET can self-organize multiple Taylor cones simultaneously.The cones were photographed and the axial emission currents were measured under different voltage and pressure difference conditions with a CILET experimental system.The emission can be divided into two stable states and one unstable state based on the flow and current characteristics.The current in Stable state Ⅰ increases non-linearly with the voltage,while that in Stable state Ⅱ is nearly linear with respect to the voltage.The number of cones increases with the voltage in stable states,while the cones become short and crowded under high-voltage conditions.The variation law of the number of cones can be explained with the self-organization theory.The variation in the current exhibits a good correlation with the number of cones.This study demonstrates the feasibility of circular emitters and experimentally indicates that the emission current is improved by approximately two orders of magnitude compared to that of a single capillary.
基金国家自然科学基金(22202124,22208376)山西省科技创新团队专项资金(202304051001023)+3 种基金山西省重点研发计划(202302060301009)山西省国家留学基金委(2023-008,2023-009)山东省自然科学基金(ZR2023LFG005)青岛新能源山东实验室开放项目(QNESL OP 202303).
文摘Developing efficient and stable non-precious metal catalysts is essential for replacing platinum-based catalysts in polymer electrolyte membrane fuel cells(PEMFCs).The transition metal and nitrogen co-doped carbon electrocatalyst(M-N-C)is considered an effective alternative to precious metal catalysts.However,its relatively poor performance in acidic environments has always been a problem plaguing its practical application in PEMFCs.This study presents a sequential deposition methodology for constructing a composite catalytic system of Fe-N-C and ionic liquid(IL),which exhibits improved performance at both half-cell and membrane electrode assembly scales.The presence of IL significantly inhibits H_(2)O_(2)production,preferentially promoting the 4e–O_(2)reduction reaction,resulting in improved electrocatalytic activity and stability.Additionally,the enhanced PEMFC performance of IL containing electrodes is a direct result of the improved ionic and reactant accessibility of the pore confined Fe-N-C catalysts where the IL minimizes local resistive transport losses.This study establishes a strategic foundation for the practical utilization of non-precious metal catalysts in PEMFCs and other energy converting technologies.
基金supported by the National Natural Science Foundation of China(21972027)the Foshan Xianhu Laboratory(41220103,41210501,XHD2021-001,XHD2022001,492305,472303)。
文摘Carbon dioxide accounts for about 80 percent of greenhouse emissions and the increasing CO_(2)emission has been identified as a critical environmental issue.On the other hand,CO_(2)is a potentially renewable resource of a single carbon molecule,and new technologies to utilize CO_(2)in producing net-zero fuels and chemicals are of global interest.Great efforts have been made in the development of new materials and processes for CO_(2)capture and utilization(CCU).Among them,ionic liquids(ILs)have attracted much attention due to their unique characteristics such as high CO_(2)solubility,high ionic conductivity,negligible volatility,non-flammability,wide electrochemical window,and high thermal stability,as well as good solvation ability.This review summarizes the most recent efforts devoted to IL-based absorption,catalysts,and CO_(2)capture and utilization processes.We discuss the factors that affect the interaction between ILs and CO_(2),impacting on the viscosity and CO_(2)solubility and preview the coupling of CO_(2)capture with electrochemical conversion of CO_(2).Finally,we provide an overview on the advantages and disadvantages of the IL-based process for practical applications.
基金financial supports pro-vided by the National Natural Science Foundation of China(No.21905279)the Natural Science Foundation of Fujian Province(No.2020J05086).
文摘Small-sized Cd_(x) Zn_(1-x) S solid solution nanomaterial is an important candidate for efficient photocatalytic hydrogen evolution(PHE),but it still suffers from easy agglomeration,severe photo corrosion,and fast photogenerated electron-hole recombination.To tackle these issues,herein,we propose a new strategy to modify Cd_(x) Zn_(1-x) S nanoreactors by the simultaneous utilization of ionic-liquid-assisted morphology engineering and MXene-incorporating method.That is,we designed and synthesized a novel hierarchi-cal Cd_(0.8) Zn_(0.2) S/Ti_(3) C_(2) Schottky junction composite through the in-situ deposition of ultrathin Cd_(0.8) Zn_(0.2) S nanosheets on unique IL-modified Ti_(3) C_(2) MXenes by a one-pot solvothermal method for efficiently PHE.The unique construction strategy tailors the thickness of ultrathin Cd_(0.8) Zn_(0.2) S nanosheets and prevents them from stacking and agglomeration,and especially,optimizes their charge transfer pathways during the photocatalytic process.Compared with pristine Cd_(0.8) Zn_(0.2) S nanosheets,Cd_(0.8) Zn_(0.2) S/Ti_(3) C_(2) has abun-dant photogenerated electrons available on the Ti_(3) C_(2) surface for proton reduction reaction,owing to the absence of deep-trapped electrons,suppression of electron-hole recombination in Cd_(0.8) Zn_(0.2) S and high-efficiency charge separation at the Cd_(0.8) Zn_(0.2) S/Ti_(3) C_(2) Schottky junction interface.Moreover,the hy-drophilicity,electrical conductivity,visible-light absorption capacity,and surficial hydrogen desorption of Cd_(0.8) Zn_(0.2) S/Ti_(3) C_(2) heterostructure are significantly improved.As a result,the heterostructure exhibits out-standing photocatalytic stability and super high apparent quantum efficiency,being rendered as one of the best noble-metal-free Cd-Zn-S-based photocatalysts.This work illustrates the mechanisms of mor-phology control and heterojunction construction in controlling the catalytic behavior of photocatalysts and highlights the great potential of the IL-assisted route in the synthesis of high-performance MXene-based heterostructures for photocatalytic hydrogen evolution.
基金sponsored by the National Natural Science Foundation of China (Nos. 22308145, 22208140, 22178159, 22078145)Natural Science Foundation of Jiangsu Province (BK20230791)Postgraduate Research Innovation Program of Jiangsu Province (KYCX24_0165)。
文摘Removing H_(2)S and CO_(2)is of great significance for natural gas purification.With excellent gas affinity and tunable structure,ionic liquids(ILs) have been regarded as nontrivial candidates for fabricating polymer-based membranes.Herein,we firstly reported the incorporation of protic ILs (PILs) having ether-rich and carboxylate sites (ECPILs) into poly(ether-block-amide)(Pebax) matrix for efficient separation H_(2)S and CO_(2)from CH_(4).Notably,the optimal permeability of H_(2)S reaches up to 4310 Barrer (40C,0.50 bar) in Pebax/ECPIL membranes,along with H_(2)S/CH_(4)and (H_(2)StCO_(2))/CH_(4)selectivity of 97.7 and 112.3,respectively.These values are increased by 1125%,160.8%and 145.9%compared to those in neat Pebax membrane.Additionally,the solubility and diffusion coefficients of the gases were measured,demonstrating that ECPIL can simultaneously strengthen the dissolution and diffusion of H_(2)S and CO_(2),thus elevating the permeability and permselectivity.By using quantum chemical calculations and FT-IR spectroscopy,the highly reversible multi-site hydrogen bonding interaction between ECPILs and H_(2)S was revealed,which is responsible for the fast permeation of H_(2)S and good selectivity.Furthermore,H_(2)S/CO_(2)/CH_(4)(3/3/94 mol/mol) ternary mixed gas can be efficiently and stably separated by Pebax/ECPIL membrane for at least 100 h.Overall,this work not only illustrates that PILs with ether-rich and carboxylate hydrogen bonding sites are outstanding materials for simultaneous removal of H_(2)S and CO_(2),but may also provide a novel insight into the design of membrane materials for natural gas upgrading.
文摘We introduce our state-of-the art of“vacuum consistent electrochemistry”to an investigation of the interfaces between oxides and ionic liquid(IL).Pulsed laser deposition(PLD)has been one of the powerful and sophisticated techniques to realize nanoscale preparation of high-quality epitaxial oxide thin films.On the other hand,electrochemistry is a simple,very sensitive,and non-destructive analysis technique for solid-liquid interfaces.To ensure the reproducibility in experiment of the interfaces of such epitaxial oxide films,as well as bulk oxide single-crystals,with IL,we employ a home-built PLD-electrochemical(EC)system with IL as an electrolyte.The system allows one to perform all-in-vacuum experiments during the preparation of well-defined oxide electrode surfaces to their electrochemical analyses.The topics include electrochemical evaluations of the oxide’s own properties,such as carrier density and relative permittivity,and the interfacial properties of oxides in contact with IL,such as flat band potential and electric double layer(EDL)capacitance,ending with future perspectives in all-solid-state electrochemistry.
文摘A series of multi-hydroxyl bis-(quaternary ammonium)ionic liquids(Ils1‒7)was prepared as bifunctional catalysts for the chemical fixation of CO_(2).All these ionic liquid compounds were efficient for the catalytic synthesis of cyclic carbonates and oxazolidinones via the cycloaddition reactions between CO_(2) and epoxides or aziridines with excellent yield and high selectivity in the absence of co-catalyst,metal and solvent.Due to the synergistic effects of hydroxyl groups and halogen anion,the cycloaddition reactions proceeded smoothly either at atmospheric pressure or room temperature.The selectivity for substituted oxazolidinones at 5-and 4-positions can be tuned via changing the reaction conditions.Finally,possible mechanisms including the activation of both CO_(2) and epoxide or aziridines were proposed based on the literatures and experimental results.
基金supported by the National Natural Science Foundation of China(22209040,22202063).
文摘The development of highly active catalyst in pH-neutral media for oxygen evolution reaction(OER)is critical in the field of renewable energy storage and conversion.Nevertheless,the slow kinetics of proton-coupled electron transfer(PCET)hinders the overall OER efficiency.Herein,we report an ionic liquid(IL)modified CoSn(OH)_(6)nanocubes(denoted as CoS-n(OH)_(6)-IL),which could be prepared through a facile strategy.The modified IL would not change the structural character-istics of CoSn(OH)_(6),but could effectively regulate the local proton activity near the active sites.The CoSn(OH)_(6)-IL exhibited higher intrinsic OER performances than the pristine CoSn(OH)_(6)in neutral media.For example,the current density of CoS-n(OH)_(6)-IL at 1.8 V versus reversible hydrogen electrode(RHE)was about 4 times higher than that of CoSn(OH)_(6).According to the pH-dependent kinetic investigations,operando electrochemical impedance spectroscopic,chemical probe tests,and deuterium kinetic isotope effects,the interfacial layer of IL could be utilized as a proton transfer mediator to promote the proton transfer,which enhances the surface coverage of OER intermediates and reduces the activation barrier.Consequent-ly,the sluggish OER kinetics would be efficiently accelerated.This study provides a facile and effective strategy to facilitate the PCET processes and is beneficial to guide the rational design of OER electrocatalysts.
