A numerical model of the steel catenary riser(SCR) is built based on the slender rod model. The slender rod model,which describes the behavior of the slender riser in terms of the center line position, can solve the g...A numerical model of the steel catenary riser(SCR) is built based on the slender rod model. The slender rod model,which describes the behavior of the slender riser in terms of the center line position, can solve the geometrical nonlinearity effectively. In a marine environment, the SCR is under the combined internal flow and external loads,such as wave and current. A general analysis considers only the inertial force and the drag force caused by the wave and current. However, the internal flow has an effect on the SCR; it is essential to explore the dynamic response of the SCR with the internal flow. The SCR also suffers the lift force and the fluctuating drag force because of the current. Finite element method is utilized to solve the motion equations. The effects of the internal flow, wave and current on the dynamic response of the SCR are considered. The results indicate that the increase of the internal flow density leads to the decrease of the displacement of the SCR, while the internal flow velocity has little effect on the SCR. The displacement of the SCR increases with the increase of the wave height and period. And the increasing wave period results in an increase in the vibration period of the SCR. The current velocity changes the displacements of the SCR in x-and z-directions. The vibration frequency of the SCR in y-direction increases with the increase of the current velocity.展开更多
Constructing a qualitative model for discrete rods warhead,the kinematics analysis and dynamics analysis of the rods are completed.On the basis of the qualitative model of discrete rods,a simulation case is provided.T...Constructing a qualitative model for discrete rods warhead,the kinematics analysis and dynamics analysis of the rods are completed.On the basis of the qualitative model of discrete rods,a simulation case is provided.The qualitative simulation result shows that hexagon cross section shape of rod will receive the lowest air drag while by means of better preplaced dip angle,controlling the rotation velocity of the rod and keeping every rod with identical dip angle to the axis of warhead will make the rod get a lateral direction velocity so as to have the rod gain identical casting initial velocity in its length direction.Simulation experiment shows that when dip angle of preplaced discrete rod is 6°,the damage cycle reaches the optimal value.展开更多
The analysis of kinematics and dynamics of an elastic rod with circular cross section is studied on the basis of exact Cosserat model under consideration of the tension and shear deformation of the rod. The dynamical ...The analysis of kinematics and dynamics of an elastic rod with circular cross section is studied on the basis of exact Cosserat model under consideration of the tension and shear deformation of the rod. The dynamical equations of a rod with arbitrary initial shape are established in general form. The dynamics of a straight rod under axial tension and torsion is discussed as an example. In discussion of static stability in the space domain the Greenhill criteria of stability and the Euler load are corrected by the influence of tension and shear strain. In analysis of dynamical stability in the time domain it is shown that the Lyapunov and Euler stability conditions of the rod in space domain are the necessary conditions of Lyapunov＇s stability in the time domain. The longitudinal, torsional and lateral vibrations of a straight rod based on exact model are discussed, and an exact formula of free frequency of lateral vibration is obtained. The free frequency formulas of various simplified models, such as the Rayleigh beam, the Kirchhoff rod, and the Timoshenko beam, can be seen as special cases of the exact formula under different conditions of simplification.展开更多
A theoretical study is presented herein on the pen- etration of a semi-infinite target by a spherical-headed long rod for Yp 〉 S, where Yp is the penetrator strength and S is the static target resistance. For Yp 〉 S...A theoretical study is presented herein on the pen- etration of a semi-infinite target by a spherical-headed long rod for Yp 〉 S, where Yp is the penetrator strength and S is the static target resistance. For Yp 〉 S, depending upon initial impact velocity, there exist three types of penetration, namely, penetration by a rigid long rod, penetration by a deforming non-erosive long rod and penetration by an erosive long rod. If the impact velocity of the penetrator is higher than the hydrodynamic velocity （VH）, it will penetrate the target in an erosive mode; if the impact velocity lies between the hydrodynamic velocity （VH） and the rigid body velocity （VR）, it will penetrate the target in a deformable mode; if the impact velocity is less than the rigid body velocity （VR）, it will penetrate the target in a rigid mode. The critical conditions for the transition among these three penetration modes are proposed. It is demonstrated that the present model predictions correlate well with the experimental observations in terms of depth of penetration （DOP） and the critical transition conditions.展开更多
With the investigated subject of 82B rod, the interlamellar spacings of pearlite at different isothermal transformation temperatures and different cooling rates during continuous cooling transformation were measured, ...With the investigated subject of 82B rod, the interlamellar spacings of pearlite at different isothermal transformation temperatures and different cooling rates during continuous cooling transformation were measured, and the effect of the isothermal transformation temperature and cooling rate on the interlamellar spacing was analyzed quantitatively. Moreover, the relationship models between undercooling and interlamellar spacing were presented by data regression. The experimental results show that the relationship between undercooling and reciprocal interlamellar spacing remains linear when the undercooling is not very large, or else, the interlamellar spacing tends to be constant and the relationship will deviate from linearity.展开更多
The Alekseevskii–Tate model is the most successful semi-hydrodynamic model applied to long-rod penetration into semi-infinite targets. However, due to the nonlinear nature of the equations, the rod(tail) velocity, pe...The Alekseevskii–Tate model is the most successful semi-hydrodynamic model applied to long-rod penetration into semi-infinite targets. However, due to the nonlinear nature of the equations, the rod(tail) velocity, penetration velocity, rod length, and penetration depth were obtained implicitly as a function of time and solved numerically By employing a linear approximation to the logarithmic relative rod length, we obtain two sets of explicit approximate algebraic solutions based on the implicit theoretica solution deduced from primitive equations. It is very convenient in the theoretical prediction of the Alekseevskii–Tate model to apply these simple algebraic solutions. In particular, approximate solution 1 shows good agreement with the theoretical(exact) solution, and the first-order perturbation solution obtained by Walters et al.(Int. J. Impac Eng. 33:837–846, 2006) can be deemed as a special form of approximate solution 1 in high-speed penetration. Meanwhile, with constant tail velocity and penetration velocity approximate solution 2 has very simple expressions, which is applicable for the qualitative analysis of long-rod penetration. Differences among these two approximate solutions and the theoretical(exact) solution and their respective scopes of application have been discussed, and the inferences with clear physical basis have been drawn. In addition, these two solutions and the first-order perturbation solution are applied to two cases with different initial impact velocity and different penetrator/target combinations to compare with the theoretical(exact) solution. Approximate solution 1 is much closer to the theoretical solution of the Alekseevskii–Tate model than the first-order perturbation solution in both cases, whilst approximate solution 2 brings us a more intuitive understanding of quasi-steady-state penetration.展开更多
Helical equilibrium of a thin elastic rod has practical backgrounds, such as DNA, fiber, sub-ocean cable, and oil-well drill string. Kirchhoff＇s kinetic analogy is an effective approach to the stability analysis of e...Helical equilibrium of a thin elastic rod has practical backgrounds, such as DNA, fiber, sub-ocean cable, and oil-well drill string. Kirchhoff＇s kinetic analogy is an effective approach to the stability analysis of equilibrium of a thin elastic rod. The main hypotheses of Kirchhoff＇s theory without the extension of the centerline and the shear deformation of the cross section are not adoptable to real soft materials of biological fibers. In this paper, the dynamic equations of a rod with a circular cross section are established on the basis of the exact Cosserat model by considering the tension and the shear deformations. Euler＇s angles are applied as the attitude representation of the cross section. The deviation of the normal axis of the cross section from the tangent of the centerline is considered as the result of the shear deformation. Lyapunov＇s stability of the helical equilibrium is discussed in static category. Euler＇s critical values of axial force and torque are obtained. Lyapunov＇s and Euler＇s stability conditions in the space domain are the necessary conditions of Lyapunov＇s stability of the helical rod in the time domain.展开更多
Laser-induced chemical vapor deposition (LCVD) is an important process for freeform microfabrication of high aspect ratio prototypes. The system consists of a laser beam focused onto a movable substrate in a vacuum ch...Laser-induced chemical vapor deposition (LCVD) is an important process for freeform microfabrication of high aspect ratio prototypes. The system consists of a laser beam focused onto a movable substrate in a vacuum chamber. Heat from the laser at or near the focal spot of the beam causes gas in the chamber to react. As a result, solid-phase reaction products are deposited on the substrate to form the microstructure. In this paper, we develop a numerical model for simulating growth of an axisymmetric cylindrical rod by pre-specifying the surface temperatures required for growing the rod and then by solving for the laser power that satisfies the pre-specified temperatures. The solution using least squares is obtained by minimizing the sum of square deviations between the pre-specified surface temperatures and the calculated temperatures from the heat equation with a given laser power as a heat source. Model predictions of the laser power over growth time helped in optimizing the growth process. Rods grown based on the predicted laser power from the numerical model were very close to being cylindrical in shape. Ways to further improve the model are being investigated.展开更多
A non-local solution for a functionally graded piezoelectric nano-rod is pre- sented by accounting the surface effect. This solution is used to evaluate the charac- teristics of the wave propagation in the rod structu...A non-local solution for a functionally graded piezoelectric nano-rod is pre- sented by accounting the surface effect. This solution is used to evaluate the charac- teristics of the wave propagation in the rod structure. The model is loaded under a two-dimensional （2D） electric potential and an initially applied voltage at the top of the rod. The mechanical and electrical properties are assumed to be variable along the thick- ness direction of the rod according to the power law. The Hamilton principle is used to derive the governing differential equations of the electromechanical system. The effects of some important parameters such as the applied voltage and gradation of the material properties on the wave characteristics of the rod are studied.展开更多
In this work,an enriched model describing the longitudinal wave propagation is established based on Mindlin’s Second Strain Gradient(SSG)theory,which can describe the heterogeneity caused by the micro-structure inter...In this work,an enriched model describing the longitudinal wave propagation is established based on Mindlin’s Second Strain Gradient(SSG)theory,which can describe the heterogeneity caused by the micro-structure interactions in the frame of continuum mechanics.The governing equation and associated boundary conditions are derived based on Hamilton’s principle,then the dispersion relation of non-classical longitudinal wave together with the extra-waves appearing exclusively in SSG theory model are investigated.The investigations are based on the modal density,energy flow,and forced response of the rod.Wave transmission and reflection through planar interfaces based on the proposed model have been calculated.Finally,the results of the enriched model are well interpreted by comparing with the classical theory results,and some useful conclusions are derived on the SSG theory based model in the wave propagation characterization.展开更多
The approximate compressible model is adopted to study the effects of strength and compressibility on the penetration by WHA long rod and copper jet into semi-infinite target in detail. For WHA rod penetrating PMMA at...The approximate compressible model is adopted to study the effects of strength and compressibility on the penetration by WHA long rod and copper jet into semi-infinite target in detail. For WHA rod penetrating PMMA at 2 km/s <V <5 km/s, the compressibility has a significant effect on the penetration efficiency. We clarify how compressibility affects the penetration efficiency by changing the stagnation pressures of the rod and target. For WHA rod penetrating 4340 Steel and 6061-T6 Al at 2 km/s < V < 10 km/s, the effect of strength is strong and the effect of compressibility is negligible at lower impact velocity, whilst the effect of strength is weak and the effect of compressibility becomes stronger at higher impact velocity. For the copper jet penetrating 4030 Steel, 6061-T6 Al and PMMA. the virtual origin model is adopted, and the compressibility and strength are implicitly considered by the linear relation between the penetration velocity and impact velocity. The effects of compressibility and target resistance on penetration efficiency are studied. The results show that the target resistance has a significant effect on the penetration efficiency. Howver PMMA is much more compressible than copper and the huge difference of compressibility has a significant effect on the penetration by hypervelocity copper jet into PMMA.展开更多
The design work of motional cable in products is vital due to the difficulty in estimating the potential issues in current researches.In this paper,a physics-based modeling and simulation method for the motional cable...The design work of motional cable in products is vital due to the difficulty in estimating the potential issues in current researches.In this paper,a physics-based modeling and simulation method for the motional cable harness design is presented.The model,based on continuum mechanics,is established by analyzing the force of microelement in equilibrium.During the analysis procedure,three coordinate systems：inertial,Frenet and main-axis coordinate systems are used.By variable substitution and dimensionless processing,the equation set is discretized by differential quadrature method and subsequently becomes an overdetermined nonlinear equation set with boundary conditions solved by Levenberg-Marquardt method.With the profile of motional cable harness obtained from the integral of arithmetic solution,a motion simulation system based on＂path＂and＂profile＂as well as the experimental equipments is built.Using the same parameters as input for the simulation and the real cable harness correspondingly,the issue in designing,such as collision,can be easily found by the simulation system.This research obtains a better result which has no potential collisions by redesign,and the proposed method can be used as an accurate and efficient way in motional cable harness design work.展开更多
Spacer grids play an important role in pressurized water reactor（PWR） fuel assembly in that they have significant influence on the thermal-hydraulic characteristics of the reactor core.But so far,the numerical studi...Spacer grids play an important role in pressurized water reactor（PWR） fuel assembly in that they have significant influence on the thermal-hydraulic characteristics of the reactor core.But so far,the numerical studies are performed without regarding dimple and spring of spacer grids,just considering mixing vane.Moreover,these studies use k-ε turbulence model without considering the suitability of the other turbulence models upon the different spacer grids flow.A study is carried out to understand the 3-D single-phase flow in AFA-2G 5×5 rod bundles with spacer grids based on numerical method.In order to investigate the suitability of different turbulence models,k-ε model and k-ω model,the influence of different parts of spacer grid on the fluid flow is also predicted.By using second-order upwind scheme,hybrid grids technique,and improved SIMPLEC algorithm,the Reynolds averaged mass conservation and momentum conservation equations are solved,and the pressure and velocity field of flow are obtained.The numerical simulation results are compared with experiment results and the agreement is satisfactory.The simulation results show the influences of the spring,dimple and mixing vane,and the different characteristics of the k-ε model and k-ω model.Comparing with the experiment results,the simulation results suggest that the k-ω model is suitable for the simulation of the rod bundle flow with spacer grids;the spring and dimple are the main causes of the pressure loss in the spacer grid channel.The friction coefficient of the channel with spring and dimple is 1.5 times the coefficient of the channel with the vane.These results are beneficial to enhance the simulation ability of spacer grids flow and optimization design ability of spaces grid.展开更多
In this article, we present the study of a double-pass air insulated by crushed millet stem mixed with gum arabic. The study is carried out based on mathematical models obtained by writing energy conservation laws in ...In this article, we present the study of a double-pass air insulated by crushed millet stem mixed with gum arabic. The study is carried out based on mathematical models obtained by writing energy conservation laws in the various components of the system, which made it possible to determine the evolution of the air temperature as a function of the length of the absorber and to make a comparison with the experimental results. After comparing the results obtained with those found in the literature, the influence of some physical and geometrical parameters on the performance of the solar thermal collector is presented.展开更多
Based on the nonlinear geometric theory of extensible rods, an exact mathematical model of thermal post_buckling behavior of uniformly heated elastic rods with axially immovable ends is developed, in which the arc len...Based on the nonlinear geometric theory of extensible rods, an exact mathematical model of thermal post_buckling behavior of uniformly heated elastic rods with axially immovable ends is developed, in which the arc length s(x) of axial line and the longitudinal displacement u(x) are taken as the basic unknown functions. This is a two point boundary value problem of first order ordinary differential equations with strong non_linearity. By using shooting method and analytical continuation, the nonlinear boundary value problems are numerically solved. The thermal post_buckled states of the rods with transversely simply supported and clamped ends are obtained respectively and the corresponding numerical data tables and characteristic curves are also given.展开更多
Long-rod penetration in a wide range ol" velocity means that the initial impact velocity varies in a range from tens of meters per second to several kilometers per second.The long rods maintain rigid state when t...Long-rod penetration in a wide range ol" velocity means that the initial impact velocity varies in a range from tens of meters per second to several kilometers per second.The long rods maintain rigid state when the impact velocity is low,the nose of rod deforms and even is blunted when the velocity gets higher,and the nose erodes and fails to lead to the consumption of long projectile when the velocity is very high clue to instantaneous high pressure.That is,from low velocity to high velocity,the projectile undergoes rigid rods,deforming non-erosive rods,and erosive rods.Because of the complicated changes of the projectile,no well-established theoretical model and numerical simulation have been used to study the transition zone.Based on the analysis of penetration behavior in the transition zone,a phenomenological model to describe target resistance and a formula to calculate penetration depth in transition zone are proposed,and a method to obtain the boundary velocity of transition zone is determined.A combined theoretical analysis model for three response regions is built by analyzing the characteristics in these regions.The penetration depth predicted by this combined model is in good agreement with experimental result.展开更多
Semi-rigid liquid crystal polymer is a class of liquid crystal polymers different from long rigid rod liquid crystal polymer to which the well-known Onsager and Flory theories are applied. In this paper, three statist...Semi-rigid liquid crystal polymer is a class of liquid crystal polymers different from long rigid rod liquid crystal polymer to which the well-known Onsager and Flory theories are applied. In this paper, three statistical models for the semi-rigid nematic polymer were addressed. They are the elastically jointed rod model, worm-like chain model, and non-homogeneous chain model. The nematic-isotropic transition temperature was examined. The pseudo-second transition temperature is expressed analytically. Comparisons with the experiments were made and the agreements were found.展开更多
基金financially supported by the Fundamental Research Funds for the Central Universities(Grant No.201861036)the National Natural Science Foundation of China(Grant No.51279187)+1 种基金the Science and Technology Major Project of Shandong Province(Grant No.2015ZDZX04003)the Key Research and Development Program of Shandong Province(Grant No.2018GHY115045)
文摘A numerical model of the steel catenary riser(SCR) is built based on the slender rod model. The slender rod model,which describes the behavior of the slender riser in terms of the center line position, can solve the geometrical nonlinearity effectively. In a marine environment, the SCR is under the combined internal flow and external loads,such as wave and current. A general analysis considers only the inertial force and the drag force caused by the wave and current. However, the internal flow has an effect on the SCR; it is essential to explore the dynamic response of the SCR with the internal flow. The SCR also suffers the lift force and the fluctuating drag force because of the current. Finite element method is utilized to solve the motion equations. The effects of the internal flow, wave and current on the dynamic response of the SCR are considered. The results indicate that the increase of the internal flow density leads to the decrease of the displacement of the SCR, while the internal flow velocity has little effect on the SCR. The displacement of the SCR increases with the increase of the wave height and period. And the increasing wave period results in an increase in the vibration period of the SCR. The current velocity changes the displacements of the SCR in x-and z-directions. The vibration frequency of the SCR in y-direction increases with the increase of the current velocity.
文摘Constructing a qualitative model for discrete rods warhead,the kinematics analysis and dynamics analysis of the rods are completed.On the basis of the qualitative model of discrete rods,a simulation case is provided.The qualitative simulation result shows that hexagon cross section shape of rod will receive the lowest air drag while by means of better preplaced dip angle,controlling the rotation velocity of the rod and keeping every rod with identical dip angle to the axis of warhead will make the rod get a lateral direction velocity so as to have the rod gain identical casting initial velocity in its length direction.Simulation experiment shows that when dip angle of preplaced discrete rod is 6°,the damage cycle reaches the optimal value.
基金Project supported by the National Natural Science Foundation of China (Grant No 10472067)
文摘The analysis of kinematics and dynamics of an elastic rod with circular cross section is studied on the basis of exact Cosserat model under consideration of the tension and shear deformation of the rod. The dynamical equations of a rod with arbitrary initial shape are established in general form. The dynamics of a straight rod under axial tension and torsion is discussed as an example. In discussion of static stability in the space domain the Greenhill criteria of stability and the Euler load are corrected by the influence of tension and shear strain. In analysis of dynamical stability in the time domain it is shown that the Lyapunov and Euler stability conditions of the rod in space domain are the necessary conditions of Lyapunov＇s stability in the time domain. The longitudinal, torsional and lateral vibrations of a straight rod based on exact model are discussed, and an exact formula of free frequency of lateral vibration is obtained. The free frequency formulas of various simplified models, such as the Rayleigh beam, the Kirchhoff rod, and the Timoshenko beam, can be seen as special cases of the exact formula under different conditions of simplification.
基金supported by the National Natural Science Foundation of China (10872195)
文摘A theoretical study is presented herein on the pen- etration of a semi-infinite target by a spherical-headed long rod for Yp 〉 S, where Yp is the penetrator strength and S is the static target resistance. For Yp 〉 S, depending upon initial impact velocity, there exist three types of penetration, namely, penetration by a rigid long rod, penetration by a deforming non-erosive long rod and penetration by an erosive long rod. If the impact velocity of the penetrator is higher than the hydrodynamic velocity （VH）, it will penetrate the target in an erosive mode; if the impact velocity lies between the hydrodynamic velocity （VH） and the rigid body velocity （VR）, it will penetrate the target in a deformable mode; if the impact velocity is less than the rigid body velocity （VR）, it will penetrate the target in a rigid mode. The critical conditions for the transition among these three penetration modes are proposed. It is demonstrated that the present model predictions correlate well with the experimental observations in terms of depth of penetration （DOP） and the critical transition conditions.
文摘With the investigated subject of 82B rod, the interlamellar spacings of pearlite at different isothermal transformation temperatures and different cooling rates during continuous cooling transformation were measured, and the effect of the isothermal transformation temperature and cooling rate on the interlamellar spacing was analyzed quantitatively. Moreover, the relationship models between undercooling and interlamellar spacing were presented by data regression. The experimental results show that the relationship between undercooling and reciprocal interlamellar spacing remains linear when the undercooling is not very large, or else, the interlamellar spacing tends to be constant and the relationship will deviate from linearity.
基金supported by the National Outstanding Young Scientist Foundation of China (Grant 11225213)the Key Subject "Computational Solid Mechanics" of China Academy of Engineering Physics
文摘The Alekseevskii–Tate model is the most successful semi-hydrodynamic model applied to long-rod penetration into semi-infinite targets. However, due to the nonlinear nature of the equations, the rod(tail) velocity, penetration velocity, rod length, and penetration depth were obtained implicitly as a function of time and solved numerically By employing a linear approximation to the logarithmic relative rod length, we obtain two sets of explicit approximate algebraic solutions based on the implicit theoretica solution deduced from primitive equations. It is very convenient in the theoretical prediction of the Alekseevskii–Tate model to apply these simple algebraic solutions. In particular, approximate solution 1 shows good agreement with the theoretical(exact) solution, and the first-order perturbation solution obtained by Walters et al.(Int. J. Impac Eng. 33:837–846, 2006) can be deemed as a special form of approximate solution 1 in high-speed penetration. Meanwhile, with constant tail velocity and penetration velocity approximate solution 2 has very simple expressions, which is applicable for the qualitative analysis of long-rod penetration. Differences among these two approximate solutions and the theoretical(exact) solution and their respective scopes of application have been discussed, and the inferences with clear physical basis have been drawn. In addition, these two solutions and the first-order perturbation solution are applied to two cases with different initial impact velocity and different penetrator/target combinations to compare with the theoretical(exact) solution. Approximate solution 1 is much closer to the theoretical solution of the Alekseevskii–Tate model than the first-order perturbation solution in both cases, whilst approximate solution 2 brings us a more intuitive understanding of quasi-steady-state penetration.
基金supported by the National Natural Science Fundation of China(No.10972143)
文摘Helical equilibrium of a thin elastic rod has practical backgrounds, such as DNA, fiber, sub-ocean cable, and oil-well drill string. Kirchhoff＇s kinetic analogy is an effective approach to the stability analysis of equilibrium of a thin elastic rod. The main hypotheses of Kirchhoff＇s theory without the extension of the centerline and the shear deformation of the cross section are not adoptable to real soft materials of biological fibers. In this paper, the dynamic equations of a rod with a circular cross section are established on the basis of the exact Cosserat model by considering the tension and the shear deformations. Euler＇s angles are applied as the attitude representation of the cross section. The deviation of the normal axis of the cross section from the tangent of the centerline is considered as the result of the shear deformation. Lyapunov＇s stability of the helical equilibrium is discussed in static category. Euler＇s critical values of axial force and torque are obtained. Lyapunov＇s and Euler＇s stability conditions in the space domain are the necessary conditions of Lyapunov＇s stability of the helical rod in the time domain.
文摘Laser-induced chemical vapor deposition (LCVD) is an important process for freeform microfabrication of high aspect ratio prototypes. The system consists of a laser beam focused onto a movable substrate in a vacuum chamber. Heat from the laser at or near the focal spot of the beam causes gas in the chamber to react. As a result, solid-phase reaction products are deposited on the substrate to form the microstructure. In this paper, we develop a numerical model for simulating growth of an axisymmetric cylindrical rod by pre-specifying the surface temperatures required for growing the rod and then by solving for the laser power that satisfies the pre-specified temperatures. The solution using least squares is obtained by minimizing the sum of square deviations between the pre-specified surface temperatures and the calculated temperatures from the heat equation with a given laser power as a heat source. Model predictions of the laser power over growth time helped in optimizing the growth process. Rods grown based on the predicted laser power from the numerical model were very close to being cylindrical in shape. Ways to further improve the model are being investigated.
基金supported by the University of Kashan(No.463865/13)the Iranian Nanotechnology Development Committee
文摘A non-local solution for a functionally graded piezoelectric nano-rod is pre- sented by accounting the surface effect. This solution is used to evaluate the charac- teristics of the wave propagation in the rod structure. The model is loaded under a two-dimensional （2D） electric potential and an initially applied voltage at the top of the rod. The mechanical and electrical properties are assumed to be variable along the thick- ness direction of the rod according to the power law. The Hamilton principle is used to derive the governing differential equations of the electromechanical system. The effects of some important parameters such as the applied voltage and gradation of the material properties on the wave characteristics of the rod are studied.
基金supported by the LabEx CeLyA (Centre Lyonnais d’Acoustique, ANR-10-LABX-0060) of Universitéde Lyon。
文摘In this work,an enriched model describing the longitudinal wave propagation is established based on Mindlin’s Second Strain Gradient(SSG)theory,which can describe the heterogeneity caused by the micro-structure interactions in the frame of continuum mechanics.The governing equation and associated boundary conditions are derived based on Hamilton’s principle,then the dispersion relation of non-classical longitudinal wave together with the extra-waves appearing exclusively in SSG theory model are investigated.The investigations are based on the modal density,energy flow,and forced response of the rod.Wave transmission and reflection through planar interfaces based on the proposed model have been calculated.Finally,the results of the enriched model are well interpreted by comparing with the classical theory results,and some useful conclusions are derived on the SSG theory based model in the wave propagation characterization.
基金supported by the National Outstanding Young Scientist Foundation of China(11225213)the Key Subject “Computational solid mechanics” of China Academy of Engineering Physics
文摘The approximate compressible model is adopted to study the effects of strength and compressibility on the penetration by WHA long rod and copper jet into semi-infinite target in detail. For WHA rod penetrating PMMA at 2 km/s <V <5 km/s, the compressibility has a significant effect on the penetration efficiency. We clarify how compressibility affects the penetration efficiency by changing the stagnation pressures of the rod and target. For WHA rod penetrating 4340 Steel and 6061-T6 Al at 2 km/s < V < 10 km/s, the effect of strength is strong and the effect of compressibility is negligible at lower impact velocity, whilst the effect of strength is weak and the effect of compressibility becomes stronger at higher impact velocity. For the copper jet penetrating 4030 Steel, 6061-T6 Al and PMMA. the virtual origin model is adopted, and the compressibility and strength are implicitly considered by the linear relation between the penetration velocity and impact velocity. The effects of compressibility and target resistance on penetration efficiency are studied. The results show that the target resistance has a significant effect on the penetration efficiency. Howver PMMA is much more compressible than copper and the huge difference of compressibility has a significant effect on the penetration by hypervelocity copper jet into PMMA.
基金Supported by National Natural Science Foundation of China(Grant No.51275047)
文摘The design work of motional cable in products is vital due to the difficulty in estimating the potential issues in current researches.In this paper,a physics-based modeling and simulation method for the motional cable harness design is presented.The model,based on continuum mechanics,is established by analyzing the force of microelement in equilibrium.During the analysis procedure,three coordinate systems：inertial,Frenet and main-axis coordinate systems are used.By variable substitution and dimensionless processing,the equation set is discretized by differential quadrature method and subsequently becomes an overdetermined nonlinear equation set with boundary conditions solved by Levenberg-Marquardt method.With the profile of motional cable harness obtained from the integral of arithmetic solution,a motion simulation system based on＂path＂and＂profile＂as well as the experimental equipments is built.Using the same parameters as input for the simulation and the real cable harness correspondingly,the issue in designing,such as collision,can be easily found by the simulation system.This research obtains a better result which has no potential collisions by redesign,and the proposed method can be used as an accurate and efficient way in motional cable harness design work.
基金supported by National Key Laboratory of Bubble Physics and Natural Circulation of China(Grant No. 51482040105CB0103)
文摘Spacer grids play an important role in pressurized water reactor（PWR） fuel assembly in that they have significant influence on the thermal-hydraulic characteristics of the reactor core.But so far,the numerical studies are performed without regarding dimple and spring of spacer grids,just considering mixing vane.Moreover,these studies use k-ε turbulence model without considering the suitability of the other turbulence models upon the different spacer grids flow.A study is carried out to understand the 3-D single-phase flow in AFA-2G 5×5 rod bundles with spacer grids based on numerical method.In order to investigate the suitability of different turbulence models,k-ε model and k-ω model,the influence of different parts of spacer grid on the fluid flow is also predicted.By using second-order upwind scheme,hybrid grids technique,and improved SIMPLEC algorithm,the Reynolds averaged mass conservation and momentum conservation equations are solved,and the pressure and velocity field of flow are obtained.The numerical simulation results are compared with experiment results and the agreement is satisfactory.The simulation results show the influences of the spring,dimple and mixing vane,and the different characteristics of the k-ε model and k-ω model.Comparing with the experiment results,the simulation results suggest that the k-ω model is suitable for the simulation of the rod bundle flow with spacer grids;the spring and dimple are the main causes of the pressure loss in the spacer grid channel.The friction coefficient of the channel with spring and dimple is 1.5 times the coefficient of the channel with the vane.These results are beneficial to enhance the simulation ability of spacer grids flow and optimization design ability of spaces grid.
文摘In this article, we present the study of a double-pass air insulated by crushed millet stem mixed with gum arabic. The study is carried out based on mathematical models obtained by writing energy conservation laws in the various components of the system, which made it possible to determine the evolution of the air temperature as a function of the length of the absorber and to make a comparison with the experimental results. After comparing the results obtained with those found in the literature, the influence of some physical and geometrical parameters on the performance of the solar thermal collector is presented.
文摘Based on the nonlinear geometric theory of extensible rods, an exact mathematical model of thermal post_buckling behavior of uniformly heated elastic rods with axially immovable ends is developed, in which the arc length s(x) of axial line and the longitudinal displacement u(x) are taken as the basic unknown functions. This is a two point boundary value problem of first order ordinary differential equations with strong non_linearity. By using shooting method and analytical continuation, the nonlinear boundary value problems are numerically solved. The thermal post_buckled states of the rods with transversely simply supported and clamped ends are obtained respectively and the corresponding numerical data tables and characteristic curves are also given.
基金supported by the National Natural Science Foundation of China(No.11302031,11371069,11372053)
文摘Long-rod penetration in a wide range ol" velocity means that the initial impact velocity varies in a range from tens of meters per second to several kilometers per second.The long rods maintain rigid state when the impact velocity is low,the nose of rod deforms and even is blunted when the velocity gets higher,and the nose erodes and fails to lead to the consumption of long projectile when the velocity is very high clue to instantaneous high pressure.That is,from low velocity to high velocity,the projectile undergoes rigid rods,deforming non-erosive rods,and erosive rods.Because of the complicated changes of the projectile,no well-established theoretical model and numerical simulation have been used to study the transition zone.Based on the analysis of penetration behavior in the transition zone,a phenomenological model to describe target resistance and a formula to calculate penetration depth in transition zone are proposed,and a method to obtain the boundary velocity of transition zone is determined.A combined theoretical analysis model for three response regions is built by analyzing the characteristics in these regions.The penetration depth predicted by this combined model is in good agreement with experimental result.
基金The work was supported by the Foundation of State Education Committee of China
文摘Semi-rigid liquid crystal polymer is a class of liquid crystal polymers different from long rigid rod liquid crystal polymer to which the well-known Onsager and Flory theories are applied. In this paper, three statistical models for the semi-rigid nematic polymer were addressed. They are the elastically jointed rod model, worm-like chain model, and non-homogeneous chain model. The nematic-isotropic transition temperature was examined. The pseudo-second transition temperature is expressed analytically. Comparisons with the experiments were made and the agreements were found.
