Gait planning based on linear inverted pendulum (LIPM) on structured road surface can be quickly generated because of the simple model and definite physical meaning. However, over-simplifi- cation of the model and dis...Gait planning based on linear inverted pendulum (LIPM) on structured road surface can be quickly generated because of the simple model and definite physical meaning. However, over-simplifi- cation of the model and discontents of zero velocity and acceleration boundary conditions when robot starts and stops walking lead to obvious difference between the model and the real robot. In this paper, parameterized gait is planned and trajectories’ smoothness of each joint angle and centroid are ensured using the 3-D LIPM theory. Static walking method is used to satisfy zero velocity and acceleration boundary conditions. Besides, a multi-link model is built to validate the stability. Simulation experiments show that: despite of some deviation from the theoretical solution, the actual zero-moment point (ZMP) is still within the support polygon, and the robot walks steadily. In consequence, the rationality and validity of model simplification of LIPM is demonstrated.展开更多
Quadruped animals in the nature realize high energy efficiency locomotion by automatically changing their gait at different speeds.Inspired by this character,an efficient adaptive diagonal gait locomotion controller i...Quadruped animals in the nature realize high energy efficiency locomotion by automatically changing their gait at different speeds.Inspired by this character,an efficient adaptive diagonal gait locomotion controller is designed for quadruped robot.A unique gait planning method is proposed in this paper.As the speed of robot varies,the gait cycle time and the proportion of stance and swing phase of each leg are adjusted to form a variety of gaits.The optimal joint torque is calculated by the controller combined with Virtual Model Control(VMC)and Whole-Body Control(WBC)to realize the desired motion.The gait and step frequency of the robot can automatically adapt to the change of speed.Several experiments are done with a quadruped robot made by our laboratory to verify that the gait can change automatically from slow-trotting to flying-trot during the period when speed is from 0 to 4 m/s.The ratio of swing phase is from less than 0.5 to more than 0.5 to realize the running motion with four feet off the ground.Experiments have shown that the controller can indeed consume less energy when robot runs at a wide range of speeds comparing to the basic controller.展开更多
The equivalent mechanism of the system is often considered as one specific mechanism in most existing studies of multi-legged robots, however the equivalent mechanism is varying while the robot moves on the ground. Fo...The equivalent mechanism of the system is often considered as one specific mechanism in most existing studies of multi-legged robots, however the equivalent mechanism is varying while the robot moves on the ground. Four typical tripod period gaits of a radial symmetrical six-legged robot are analyzed. Similar to the metamorphic mechanism, the locomotion of multi-legged robot is considered as a series of varying hybrid serial-parallel mechanisms by assuming the constraints of the feet on the ground with hinges. One gait cycle is divided into several periods, and in different walking period there is a specific equivalent mechanism corresponding to it, and the walking process of multi-legged robot is composed by these series of equivalent mechanisms. Walking performance can be got by analyzing these series of equivalent mechanisms. Kinematics model of the equivalent mechanism is established, workspaces of equivalent mechanisms are illustrated by simulation and a concept of static stability workspace is proposed to evaluate the static stability of these four gaits. A new method to calculate the stride length of multi-legged robots is presented by analyzing the relationship between the workspace of two adjacent equivalent parallel mechanisms in one gait cycle. The stride lengths of four gaits are given by simulations. Comparison of stride length and static stability among these four typical tripod gaits are given. It has been proved that mixed gait and insect-wave gait II have better static stability than mammal kick-off gait and insect-wave gait I. Insect-wave gait II displays its advantage on stride length while the height of robot body lower than 87 mm, mammal kick-off gait has superiority on stride length while the height of robot body higher than 115 mm, and insect-wave gait I shows its shortcoming in stride length. The proposed method based on metamorphic theory and combining the footholds and body height of robot provides a new method to comprehensive analyze the performance of multi-legged robot.展开更多
The previous research regarding the gait planning of quadruped robot focuses on the sequence for lifting o and placing the feet, but neglects the influence of body height. However, body height a ects gait performance ...The previous research regarding the gait planning of quadruped robot focuses on the sequence for lifting o and placing the feet, but neglects the influence of body height. However, body height a ects gait performance significantly, such as in terms of the stride length and stability margin. We herein study the performance of a quadruped robot using the equivalent mechanism concept based on metamorphosis. Assuming the constraints between standing feet and the ground with hinges, the ground, standing legs and robot body are considered as a parallel mechanism, and each swing leg is regarded as a typical serial manipulator. The equivalent mechanism varies while the robot moves on the ground. One gait cycle is divided into several periods, including step forward stages and switching stages. There exists a specific equivalent mechanism corresponding to each gait period. The robot's locomotion can be regarded as the motion of these series of equivalent mechanisms. The kinematics model and simplified model of the equivalent mechanism is established. A new definition of the multilegged robot stability margin, based on friction coe cient, is presented to evaluate the robot stability. The stable workspaces of the equivalent mechanism in the step forward stage of trotting gait under di erent friction coe cients are analyzed. The stride length of the robots is presented by analyzing the relationship between the stable workspaces of the equivalent mechanisms of two adjacent step forward stages in one gait cycle. The simulation results show that the stride length is larger with increasing friction coe cient. We herein propose a new method based on metamorphosis, and an equivalent mechanism to analyze the stability margin and stable workspace of the multilegged robot.展开更多
Quadruped robots consume a lot of energy, which is one of the factors restricting their application. Energy efficiency is one of the key evaluating indicators for walking robots. The relationship between energy and el...Quadruped robots consume a lot of energy, which is one of the factors restricting their application. Energy efficiency is one of the key evaluating indicators for walking robots. The relationship between energy and elastic elements of walking robots have been studied, but different walking gait patterns and contact status have important influences on locomotion energy efficiency, and the energy efficiency considering the foot-end trajectory has not been reported. Therefore, the energy consumption and energy efficiency of quadruped robot with trot gait and combined cycloid foot trajectory are studied. The forward and inverse kinematics of quadruped robot is derived. The combined cycloid function is proposed to generate horizontal and vertical foot trajectory respectively, which can ensure the acceleration curve of the foot-end smoother and more successive, and reduce the contact force between feet and environment. Because of the variable topology mechanism characteristic of quadruped robot, the leg state is divided into three different phases which are swing phase, transition phase and stance phase during one trot gait cycle. The non-continuous variable constraint between feet and environment of quadruped robot is studied. The dynamic model of quadruped robot is derived considering the variable topology mechanism characteristic, the periodic contact and elastic elements of the robot. The total energy consumption of walking robot during one gait cycle is analyzed based on the dynamic model. The specific resistance is used to evaluate energy efficiency of quadruped robot. The calculation results show the relationships between specific resistance and gait parameters, which can be used to determine the reasonable gait parameters.展开更多
Fault tolerance is essential for quadruped robots when they work in remote areas or hazardous environments. Many fault-tolerant gaits planning method proposed in the past decade constrained more degrees of freedom（D...Fault tolerance is essential for quadruped robots when they work in remote areas or hazardous environments. Many fault-tolerant gaits planning method proposed in the past decade constrained more degrees of freedom（DOFs） of a robot than necessary. Thus a novel method to realize the fault-tolerant walking is proposed. The mobility of the robot is analyzed first by using the screw theory. The result shows that the translation of the center of body（CoB） can be kept with one faulty actuator if the rotations of the body are controlled. Thus the DOFs of the robot body are divided into two parts： the translation of the CoB and the rotation of the body. The kinematic model of the whole robot is built, the algorithm is developed to actively control the body orientations at the velocity level so that the planned CoB trajectory can be realized in spite of the constraint of the faulty actuator. This gait has a similar generation sequence with the normal gait and can be applied to the robot at any position. Simulations and experiments of the fault-tolerant gait with one faulty actuator are carried out. The CoB errors and the body rotation angles are measured. Comparing to the traditional fault-tolerant gait they can be reduced by at least 50%. A fault-tolerant gait planning algorithm is presented, which not only realizes the walking of a quadruped robot with a faulty actuator, but also efficiently improves the walking performances by taking full advantage of the remaining operational actuators according to the results of the simulations and experiments.展开更多
Realistically there are many robot joints in the biologically inspired hexapod robot, so they will generate many complexities in the calculations of the gait and the path planning and the control variables. The softwa...Realistically there are many robot joints in the biologically inspired hexapod robot, so they will generate many complexities in the calculations of the gait and the path planning and the control variables. The software Solidworks and MSC. ADAMS are adopted to simulate and analyze the prototype model of the robot. By the simulations used in our design, the applicability of the tripod gait is validated, and the scheme which uses cubic spline curve as the endpoint of foot＇s path is feasible. The principles, methods, and processes of the simulation of hexapod robot are illustrated. A methodology is proposed to get the robot inverse solution in ADAMS, and to simplify the theoretical calculation, and further more to improve the efficiency of the design.展开更多
The electrically driven six-legged robot with high carrying capacity is an indispensable equipment for planetary exploration, but it hinders its practicability because of its low efficiency of carrying energy. Meanwhi...The electrically driven six-legged robot with high carrying capacity is an indispensable equipment for planetary exploration, but it hinders its practicability because of its low efficiency of carrying energy. Meanwhile, its load capacity also affects its application range. To reduce the power consumption, increase the load to mass ratio, and improve the stability of robot, the relationship between the walking modes and the forces of feet under the tripod gait are researched for an electrically driven heavy-duty six-legged robot. Based on the configuration characteristics of electrically driven heavy-duty six-legged, the typical walking modes of robot are analyzed. The mathematical models of the normal forces of feet are respectively established under the tripod gait of typical walking modes. According to the MATLAB software, the variable tendency charts are respectively gained for the normal forces of feet. The walking experiments under the typical tripod gaits are implemented for the prototype of electrically driven heavy-duty six-legged robot. The variable tendencies of maximum normal forces of feet are acquired. The comparison results show that the theoretical and experimental data are in the same trend. The walking modes which are most available to realize the average force of distribution of each foot are confirmed. The proposed method of analyzing the relationship between the walking modes and the forces of feet can quickly determine the optimal walking mode and gait parameters under the average distribution of foot force, which is propitious to develop the excellent heavy-duty multi-legged robots with the lower power consumption, larger load to mass ratio, and higher stability.展开更多
Walking is the most basic and essential part of the activities of daily living. To enable the elderly and non-ambulatory gait-impaired patients, the repetitive practice of this task, a novel gait training robot(GTR) w...Walking is the most basic and essential part of the activities of daily living. To enable the elderly and non-ambulatory gait-impaired patients, the repetitive practice of this task, a novel gait training robot(GTR) was designed followed the end-effector principle, and an active partial body weight support(PBWS) system was introduced to facilitate successful gait training. For successful establishment of a walking gait on the GTR with PBWS, the motion laws of the GTR were planned to enable the phase distribution relationships of the cycle step, and the center of gravity(COG) trajectory of the human body during gait training on the GTR was measured. A coordinated control strategy was proposed based on the impedance control principle. A robotic prototype was developed as a platform for evaluating the design concepts and control strategies. Preliminary gait training with a healthy subject was implemented by the robotic-assisted gait training system and the experimental results are encouraging.展开更多
To accommodate the gait and balance disorder of the elderly with age progression and the occurrence of various senile diseases,this paper proposes a novel gait balance training robot(G-Balance)based on a six degree-of...To accommodate the gait and balance disorder of the elderly with age progression and the occurrence of various senile diseases,this paper proposes a novel gait balance training robot(G-Balance)based on a six degree-of-freedom parallel platform.Using the platform movement and IMU wearable sensors,two training modes,i.e.,active and passive,are developed to achieve vestibular stimulation.Virtual reality technology is applied to achieve visual stimulation.In the active training mode,the elderly actively exercises to control the posture change of the platform and the switching of the virtual scene.In the passive training mode,the platform movement is combined with the virtual scene to simulate bumpy environments,such as earthquakes,to enhance the human anti-interference ability.To achieve a smooth switching of the scene,continuous speed and acceleration of the platform motion are required in some scenarios,in which a trajectory planning algorithm is applied.This paper describes the application of the trajectory planning algorithm in the balance training mode and the optimization of jerk(differential of acceleration)based on cubic spline planning,which can reduce impact on the joint and enhance stability.展开更多
Turning gait is a basic motion for humanoid robots. This paper presents a method for humanoid tuming, i.e. clock-turning. The objective of clock-turning is to change robot direction at a stationary spot. The clock-tur...Turning gait is a basic motion for humanoid robots. This paper presents a method for humanoid tuming, i.e. clock-turning. The objective of clock-turning is to change robot direction at a stationary spot. The clock-turning planning consists of four steps： ankle trajectory generation, hip trajectory generation, knee trajectory generation, and inverse kinematics calculation. Our proposed method is based on a typical humanoid structure with 12 DOFs （degrees of freedom）. The final output of clock-turning planning is 12 reference trajectories, which are used to control a humanoid robot with 12 DOFs. ZMP （zero moment point） is used as stability criterion for the planning. Simulation experiments are conducted to verify the effectiveness of our proposed clock-turuing method.展开更多
The body of quadruped robot is generally developed with the rigid structure. The mobility of quadruped robot depcnds on the mechanical properties of the body mechanism, It is difficult for quadruped robot with rigid s...The body of quadruped robot is generally developed with the rigid structure. The mobility of quadruped robot depcnds on the mechanical properties of the body mechanism, It is difficult for quadruped robot with rigid structure to achieve better mobility walking or running in the unstructured environment. A kind of bionic flexible body mechanism for quadruped robot is proposed, which is composed of one bionic spine and four pneumatic artificial muscles（PAMs）. This kind of body imitates the four-legged creatures＇ kinematical structure and physical properties, which has the characteristic of changeable stiff＇hess, lightweight, flexible and better bionics. The kinematics of body bending is derived, and the coordinated movement between the flexible body and legs is analyzed. The relationship between the body bending angle and the PAM length is obtained. The dynamics of the body bending is derived by the floating coordinate method and Lagrangian method, and the driving tbrce of PAM is determined. The experiment of body bending is conductcd, and the dynamic bending characteristic of bionic flexible body is evaluated. Experimental results show that the bending angle of the bionic flexible body can reach 18. An innovation body mechanism for quadruped robot is proposed, which has the characteristic of flexibility and achieve bending by changing gas pressure of PAMs. The coordinated movement of the body and legs can achieve spinning gait in order to improve the mobility of quadruped robot.展开更多
文摘Gait planning based on linear inverted pendulum (LIPM) on structured road surface can be quickly generated because of the simple model and definite physical meaning. However, over-simplifi- cation of the model and discontents of zero velocity and acceleration boundary conditions when robot starts and stops walking lead to obvious difference between the model and the real robot. In this paper, parameterized gait is planned and trajectories’ smoothness of each joint angle and centroid are ensured using the 3-D LIPM theory. Static walking method is used to satisfy zero velocity and acceleration boundary conditions. Besides, a multi-link model is built to validate the stability. Simulation experiments show that: despite of some deviation from the theoretical solution, the actual zero-moment point (ZMP) is still within the support polygon, and the robot walks steadily. In consequence, the rationality and validity of model simplification of LIPM is demonstrated.
基金supported in part by the National Key Research and Development Program of China[Grant No.2020AAA0108900]the National Natural Science Foundation of China[No.91948201,62003190,62203268,61973185]+1 种基金the Open Research Projects of Zhejiang Lab(No.2022NB0AB06)the National Natural Science Foundation of Shandong Province of China[No.ZR2022QF027].
文摘Quadruped animals in the nature realize high energy efficiency locomotion by automatically changing their gait at different speeds.Inspired by this character,an efficient adaptive diagonal gait locomotion controller is designed for quadruped robot.A unique gait planning method is proposed in this paper.As the speed of robot varies,the gait cycle time and the proportion of stance and swing phase of each leg are adjusted to form a variety of gaits.The optimal joint torque is calculated by the controller combined with Virtual Model Control(VMC)and Whole-Body Control(WBC)to realize the desired motion.The gait and step frequency of the robot can automatically adapt to the change of speed.Several experiments are done with a quadruped robot made by our laboratory to verify that the gait can change automatically from slow-trotting to flying-trot during the period when speed is from 0 to 4 m/s.The ratio of swing phase is from less than 0.5 to more than 0.5 to realize the running motion with four feet off the ground.Experiments have shown that the controller can indeed consume less energy when robot runs at a wide range of speeds comparing to the basic controller.
基金supported by National Science Foundation for Distinguished Young Scholoars, China (Grant No. 51125020)Program for New Century Excellent Talents in University, China
文摘The equivalent mechanism of the system is often considered as one specific mechanism in most existing studies of multi-legged robots, however the equivalent mechanism is varying while the robot moves on the ground. Four typical tripod period gaits of a radial symmetrical six-legged robot are analyzed. Similar to the metamorphic mechanism, the locomotion of multi-legged robot is considered as a series of varying hybrid serial-parallel mechanisms by assuming the constraints of the feet on the ground with hinges. One gait cycle is divided into several periods, and in different walking period there is a specific equivalent mechanism corresponding to it, and the walking process of multi-legged robot is composed by these series of equivalent mechanisms. Walking performance can be got by analyzing these series of equivalent mechanisms. Kinematics model of the equivalent mechanism is established, workspaces of equivalent mechanisms are illustrated by simulation and a concept of static stability workspace is proposed to evaluate the static stability of these four gaits. A new method to calculate the stride length of multi-legged robots is presented by analyzing the relationship between the workspace of two adjacent equivalent parallel mechanisms in one gait cycle. The stride lengths of four gaits are given by simulations. Comparison of stride length and static stability among these four typical tripod gaits are given. It has been proved that mixed gait and insect-wave gait II have better static stability than mammal kick-off gait and insect-wave gait I. Insect-wave gait II displays its advantage on stride length while the height of robot body lower than 87 mm, mammal kick-off gait has superiority on stride length while the height of robot body higher than 115 mm, and insect-wave gait I shows its shortcoming in stride length. The proposed method based on metamorphic theory and combining the footholds and body height of robot provides a new method to comprehensive analyze the performance of multi-legged robot.
基金Supported by National Natural Science Foundation of China(Grant Nos.51775011,91748201)
文摘The previous research regarding the gait planning of quadruped robot focuses on the sequence for lifting o and placing the feet, but neglects the influence of body height. However, body height a ects gait performance significantly, such as in terms of the stride length and stability margin. We herein study the performance of a quadruped robot using the equivalent mechanism concept based on metamorphosis. Assuming the constraints between standing feet and the ground with hinges, the ground, standing legs and robot body are considered as a parallel mechanism, and each swing leg is regarded as a typical serial manipulator. The equivalent mechanism varies while the robot moves on the ground. One gait cycle is divided into several periods, including step forward stages and switching stages. There exists a specific equivalent mechanism corresponding to each gait period. The robot's locomotion can be regarded as the motion of these series of equivalent mechanisms. The kinematics model and simplified model of the equivalent mechanism is established. A new definition of the multilegged robot stability margin, based on friction coe cient, is presented to evaluate the robot stability. The stable workspaces of the equivalent mechanism in the step forward stage of trotting gait under di erent friction coe cients are analyzed. The stride length of the robots is presented by analyzing the relationship between the stable workspaces of the equivalent mechanisms of two adjacent step forward stages in one gait cycle. The simulation results show that the stride length is larger with increasing friction coe cient. We herein propose a new method based on metamorphosis, and an equivalent mechanism to analyze the stability margin and stable workspace of the multilegged robot.
基金supported by National Natural Science Foundation of China(Grant No.51375289)Shanghai Municipal National Natural Science Foundation of China(Grant No.13ZR1415500)Innovation Fund of Shanghai Education Commission of China(Grant No.13YZ020)
文摘Quadruped robots consume a lot of energy, which is one of the factors restricting their application. Energy efficiency is one of the key evaluating indicators for walking robots. The relationship between energy and elastic elements of walking robots have been studied, but different walking gait patterns and contact status have important influences on locomotion energy efficiency, and the energy efficiency considering the foot-end trajectory has not been reported. Therefore, the energy consumption and energy efficiency of quadruped robot with trot gait and combined cycloid foot trajectory are studied. The forward and inverse kinematics of quadruped robot is derived. The combined cycloid function is proposed to generate horizontal and vertical foot trajectory respectively, which can ensure the acceleration curve of the foot-end smoother and more successive, and reduce the contact force between feet and environment. Because of the variable topology mechanism characteristic of quadruped robot, the leg state is divided into three different phases which are swing phase, transition phase and stance phase during one trot gait cycle. The non-continuous variable constraint between feet and environment of quadruped robot is studied. The dynamic model of quadruped robot is derived considering the variable topology mechanism characteristic, the periodic contact and elastic elements of the robot. The total energy consumption of walking robot during one gait cycle is analyzed based on the dynamic model. The specific resistance is used to evaluate energy efficiency of quadruped robot. The calculation results show the relationships between specific resistance and gait parameters, which can be used to determine the reasonable gait parameters.
基金Supported by National Basic Research Program of China(973 Program,Grant No.2013CB035501)National Natural Science Foundation of China(Grant No.51175323)+1 种基金Research Fund of the State Key Lab of MSV of China(Grant No.MSV201208)Shanghai Municipal Natural Science Foundation of China(Grant No.14ZR1422600)
文摘Fault tolerance is essential for quadruped robots when they work in remote areas or hazardous environments. Many fault-tolerant gaits planning method proposed in the past decade constrained more degrees of freedom（DOFs） of a robot than necessary. Thus a novel method to realize the fault-tolerant walking is proposed. The mobility of the robot is analyzed first by using the screw theory. The result shows that the translation of the center of body（CoB） can be kept with one faulty actuator if the rotations of the body are controlled. Thus the DOFs of the robot body are divided into two parts： the translation of the CoB and the rotation of the body. The kinematic model of the whole robot is built, the algorithm is developed to actively control the body orientations at the velocity level so that the planned CoB trajectory can be realized in spite of the constraint of the faulty actuator. This gait has a similar generation sequence with the normal gait and can be applied to the robot at any position. Simulations and experiments of the fault-tolerant gait with one faulty actuator are carried out. The CoB errors and the body rotation angles are measured. Comparing to the traditional fault-tolerant gait they can be reduced by at least 50%. A fault-tolerant gait planning algorithm is presented, which not only realizes the walking of a quadruped robot with a faulty actuator, but also efficiently improves the walking performances by taking full advantage of the remaining operational actuators according to the results of the simulations and experiments.
基金Sponsored by the Ministerial Level Advanced Research Foundation(6140528)
文摘Realistically there are many robot joints in the biologically inspired hexapod robot, so they will generate many complexities in the calculations of the gait and the path planning and the control variables. The software Solidworks and MSC. ADAMS are adopted to simulate and analyze the prototype model of the robot. By the simulations used in our design, the applicability of the tripod gait is validated, and the scheme which uses cubic spline curve as the endpoint of foot＇s path is feasible. The principles, methods, and processes of the simulation of hexapod robot are illustrated. A methodology is proposed to get the robot inverse solution in ADAMS, and to simplify the theoretical calculation, and further more to improve the efficiency of the design.
基金Supported by National Natural Science Foundation of China(Grant Nos.51505335,51275106)National Basic Research Program of China(973Program,Grant No.2013CB035502)
文摘The electrically driven six-legged robot with high carrying capacity is an indispensable equipment for planetary exploration, but it hinders its practicability because of its low efficiency of carrying energy. Meanwhile, its load capacity also affects its application range. To reduce the power consumption, increase the load to mass ratio, and improve the stability of robot, the relationship between the walking modes and the forces of feet under the tripod gait are researched for an electrically driven heavy-duty six-legged robot. Based on the configuration characteristics of electrically driven heavy-duty six-legged, the typical walking modes of robot are analyzed. The mathematical models of the normal forces of feet are respectively established under the tripod gait of typical walking modes. According to the MATLAB software, the variable tendency charts are respectively gained for the normal forces of feet. The walking experiments under the typical tripod gaits are implemented for the prototype of electrically driven heavy-duty six-legged robot. The variable tendencies of maximum normal forces of feet are acquired. The comparison results show that the theoretical and experimental data are in the same trend. The walking modes which are most available to realize the average force of distribution of each foot are confirmed. The proposed method of analyzing the relationship between the walking modes and the forces of feet can quickly determine the optimal walking mode and gait parameters under the average distribution of foot force, which is propitious to develop the excellent heavy-duty multi-legged robots with the lower power consumption, larger load to mass ratio, and higher stability.
基金Project(61175128) supported by the National Natural Science Foundation of ChinaProject(2008AA040203) supported by the National High Technology Research and Development Program of China
文摘Walking is the most basic and essential part of the activities of daily living. To enable the elderly and non-ambulatory gait-impaired patients, the repetitive practice of this task, a novel gait training robot(GTR) was designed followed the end-effector principle, and an active partial body weight support(PBWS) system was introduced to facilitate successful gait training. For successful establishment of a walking gait on the GTR with PBWS, the motion laws of the GTR were planned to enable the phase distribution relationships of the cycle step, and the center of gravity(COG) trajectory of the human body during gait training on the GTR was measured. A coordinated control strategy was proposed based on the impedance control principle. A robotic prototype was developed as a platform for evaluating the design concepts and control strategies. Preliminary gait training with a healthy subject was implemented by the robotic-assisted gait training system and the experimental results are encouraging.
基金Supported by National Key R&D Program of China(Grant No.2019YFB1311404)。
文摘To accommodate the gait and balance disorder of the elderly with age progression and the occurrence of various senile diseases,this paper proposes a novel gait balance training robot(G-Balance)based on a six degree-of-freedom parallel platform.Using the platform movement and IMU wearable sensors,two training modes,i.e.,active and passive,are developed to achieve vestibular stimulation.Virtual reality technology is applied to achieve visual stimulation.In the active training mode,the elderly actively exercises to control the posture change of the platform and the switching of the virtual scene.In the passive training mode,the platform movement is combined with the virtual scene to simulate bumpy environments,such as earthquakes,to enhance the human anti-interference ability.To achieve a smooth switching of the scene,continuous speed and acceleration of the platform motion are required in some scenarios,in which a trajectory planning algorithm is applied.This paper describes the application of the trajectory planning algorithm in the balance training mode and the optimization of jerk(differential of acceleration)based on cubic spline planning,which can reduce impact on the joint and enhance stability.
基金This work was supported by the National Natural Science Foundation of China (No. 60174018).
文摘Turning gait is a basic motion for humanoid robots. This paper presents a method for humanoid tuming, i.e. clock-turning. The objective of clock-turning is to change robot direction at a stationary spot. The clock-turning planning consists of four steps： ankle trajectory generation, hip trajectory generation, knee trajectory generation, and inverse kinematics calculation. Our proposed method is based on a typical humanoid structure with 12 DOFs （degrees of freedom）. The final output of clock-turning planning is 12 reference trajectories, which are used to control a humanoid robot with 12 DOFs. ZMP （zero moment point） is used as stability criterion for the planning. Simulation experiments are conducted to verify the effectiveness of our proposed clock-turuing method.
基金Supported by National Natural Science Foundation of China(Grant No.51375289)Shanghai Municipal Natural Science Foundation of China(Grant No.13ZR1415500)Innovation Fund of Shanghai Education Commission(Grant No.13YZ020)
文摘The body of quadruped robot is generally developed with the rigid structure. The mobility of quadruped robot depcnds on the mechanical properties of the body mechanism, It is difficult for quadruped robot with rigid structure to achieve better mobility walking or running in the unstructured environment. A kind of bionic flexible body mechanism for quadruped robot is proposed, which is composed of one bionic spine and four pneumatic artificial muscles（PAMs）. This kind of body imitates the four-legged creatures＇ kinematical structure and physical properties, which has the characteristic of changeable stiff＇hess, lightweight, flexible and better bionics. The kinematics of body bending is derived, and the coordinated movement between the flexible body and legs is analyzed. The relationship between the body bending angle and the PAM length is obtained. The dynamics of the body bending is derived by the floating coordinate method and Lagrangian method, and the driving tbrce of PAM is determined. The experiment of body bending is conductcd, and the dynamic bending characteristic of bionic flexible body is evaluated. Experimental results show that the bending angle of the bionic flexible body can reach 18. An innovation body mechanism for quadruped robot is proposed, which has the characteristic of flexibility and achieve bending by changing gas pressure of PAMs. The coordinated movement of the body and legs can achieve spinning gait in order to improve the mobility of quadruped robot.
