High catalytic efficiencies in ring opening polymerization(ROP)of a large ring-sized macrolactone,ω-pentadecalactone(PDL),by using transition metal Fe(II)-based catalysts were achieved for the first time in this stud...High catalytic efficiencies in ring opening polymerization(ROP)of a large ring-sized macrolactone,ω-pentadecalactone(PDL),by using transition metal Fe(II)-based catalysts were achieved for the first time in this study.Benefited from the bulky nature of the ligatedα-diimine ligands,as evidenced from single-crystal structures,as well as the weakly oxophilic nature of the metal centers,chain transesterification reactions could be partially suppressed,allowing the polymerization proceed in a living-like and semi-controllable manner,i.e.good linear dependence of propagation rates on catalyst concentration and PDL concentration as observed in the detailed kinetics studies.The whole polymerization proceeds via a“coordination-insertion”mechanism,and with the aid of density functional theory(DFT)calculation studies,a“slow insertion→fast elimination”manner was demonstrated for the monomer propagation step,suggesting the insertion of Fe-OR into the carbonyl group C=O as the rate-determining step.The present catalytic system also showed fast chain transfer reactions to alcohol compounds,affording quasi-immortal characteristics.DFT calculations showed that such a transfer reaction only required an energy barrier of 6.4 kcal/mol,performing a good consistency with the fast chain transfer rates.展开更多
Three Keggin-type heteropolyanions, namely H3PMo12O40-13H2O, （NH4）3PMo12O40·4H2O and H3PW12O40·13H2O were prepared and tested in the ring-opening polymerization reaction of tetrahydrofuran. The effects of ...Three Keggin-type heteropolyanions, namely H3PMo12O40-13H2O, （NH4）3PMo12O40·4H2O and H3PW12O40·13H2O were prepared and tested in the ring-opening polymerization reaction of tetrahydrofuran. The effects of the counter-cation （H＋, NH4＋） and the peripheral atoms （Mo, W） on the polymerization were investigated. It has been found that when the protons of H3PMo12O40·13H2O were replaced by the ammonium cations the polymerization rate decreased dramatically. Whereas, when the peripheral atoms （Mo） were replaced by their homologous （W）, the polymerization rate increased twofold. As for the viscosity average molecular weight （My） of polymer products, it was found that the high molecular weight （7930） was obtained by using H3PW12O40·13H2O. The molecular weight （My） obtained by H3PMo12O40·13H2O and （NH4）H3PMo12O40·13H2O was 6470 and 6810, respectively.展开更多
The random copolymers of glutamic acid （LG） and aspartic acid （ASP）, poly（LG-co-ASP）, with designed compositions could be successfully synthesized via combination of N-carboxyanhydride ring opening copolymerizat...The random copolymers of glutamic acid （LG） and aspartic acid （ASP）, poly（LG-co-ASP）, with designed compositions could be successfully synthesized via combination of N-carboxyanhydride ring opening copolymerization with debenzylation. Ring opening copolymerizations of y：benzyl-L-glutamate N-carboxyanhydride （BLG-NCA） and β-benzyl-Laspartate N-carboxyanhydride （BLA-NCA） were carried out by using different amines including triethylamine （TEA）, diethylamine, n-hexylamine （NHA）, triphenylamine, diphenylamine or aniline as initiators. All the 6 amines were highly efficient to get well-defined poly（BLG-co-BLA） copolymers with designed compositions although the polymerizations proceeded via different mechanisms （normal amine mechanism or/and activated monomer mechanism）, which are based on chemical structure of amines. The molecular weights of poly（BLG-co-BLA） copolymers could be mediated by both TEA concentration and polymerization time. Then, debenzylation ofpoly（BLG-co-BLA） copolymers was conducted to prepare the corresponding hydrophilic random eopolymers of poly（LG-co-ASP） with a-subunit structure in ASP structural units. The contents of LG structural units in poly（LG-co-ASP） copolymers matched with those of BLG-NCA in NCA-monomer feeds in ring opening copolymerizations initiated by NHA or TEA and were closed to the theoretical line. The diblock copolymer of poly（BLG-b-BLA） could also be synthesized via living NCA ring opening copolymerization by sequential addition of BLG- NCA and BLA-NCA.展开更多
Ligand effect of the catalytic system WCl6-Et2AlCl for ring opening metathesis polymerization (ROMP) of dicyclopentadiene (DCPD) was investigated. The experimental results show that adding sterically hindered phenol-2...Ligand effect of the catalytic system WCl6-Et2AlCl for ring opening metathesis polymerization (ROMP) of dicyclopentadiene (DCPD) was investigated. The experimental results show that adding sterically hindered phenol-2. 6-di-tert-butylcresylol(DTBC) in the catalytic system not only can obviously increase the monomer conversion of polymerization but also improve the mechanical properties, such as notched impact strength (NIS), tensile strength (TS) ect. 5 of the synthesized polyicycolpentadiene (PDCPD). A similar effect can be observed by using a sterically hindered polymeric phenol - linear phenol formaldehyde resin (LPF) as a ligand.展开更多
Reaction of (MeC 5H 4) 3Ln with HOCH 2CH 2NMe 2 in tetrahydrofuran(THF) gives the new complexes [(MeC 5H 4) 2Ln(μ OCH 2CH 2NMe 2)] 2 (Ln=Sm, Y, Nd) with nitrogen functionalized μ alkoxide ligand. The ...Reaction of (MeC 5H 4) 3Ln with HOCH 2CH 2NMe 2 in tetrahydrofuran(THF) gives the new complexes [(MeC 5H 4) 2Ln(μ OCH 2CH 2NMe 2)] 2 (Ln=Sm, Y, Nd) with nitrogen functionalized μ alkoxide ligand. The complexes were characterized by elemental analysis and IR, and [(MeC 5H 4) 2Sm(μ OCH 2CH 2NMe 2)] 2 was structurally characterized by the X ray diffraction to be a dimer formed by two unsymmetric oxygen bridges. The complex has a tricyclic skeleton with the additional two Sm-N bonds via intramolecular coordination of OCH 2CH 2NMe 2. The coordination number of the central metal Sm is nine. The title complexes show good catalytic activity for ring opening polymerization of ε caprolactone.展开更多
The cationic ring-opening polymerization of tetrahydrofiiran using maghnite-H~＋ is reported.Maghnite-H~＋,is a non-toxic solid catalyst issued from proton exchanged montmorillonite clay.Polytetrahydrofuran,also call...The cationic ring-opening polymerization of tetrahydrofiiran using maghnite-H~＋ is reported.Maghnite-H~＋,is a non-toxic solid catalyst issued from proton exchanged montmorillonite clay.Polytetrahydrofuran,also called ＂poly（butandiol） ether＂,with acetate and hydroxyl end groups was successfully synthesized.Effects of reaction temperature, weight ratio of initiator/monomer and reaction time on the conversion of monomer and on the molecular weight are investigated.A cationic mechanism of the reaction was proposed.This chemistry can be considered as a suitable route for preparing poly（THF） as a soft segment for thermoplastic elastomers.展开更多
A new kind of polyesteramide based on 3-morpholinone and e caprolactone was synthesized by ring opening polymerization with zinc powder as catalyst.The polymer was characterized by^(1)H NMR,GPC and FT-IR.The effect of...A new kind of polyesteramide based on 3-morpholinone and e caprolactone was synthesized by ring opening polymerization with zinc powder as catalyst.The polymer was characterized by^(1)H NMR,GPC and FT-IR.The effect of time,temperature and ratio of m(M)/m(1),n(M)/n(CL)on the reaction was studied.The results show that the optimal reaction temperature is 120℃;the optimal duration of reaction is 24 h;the optimal ratio of m(M)/m(CL)is 50:1;the optimal ratio of n(M)/n(CL)is 1:2.Under the optimal condition the polymer whose M_(n)was 13509 could be obtained while the weight yield was 79%.展开更多
Chloromethyl-2-norbornene was synthesized via Diels-Alder reaction of cyclopentadiene and allyl chloride using a polymer supported boron trifluoride as the catalyst, and was then lithiated and used to initiate a livin...Chloromethyl-2-norbornene was synthesized via Diels-Alder reaction of cyclopentadiene and allyl chloride using a polymer supported boron trifluoride as the catalyst, and was then lithiated and used to initiate a living anionic polymerization of styrene to prepare a macromonome, 5-polystyryl-2-norbornene NBPS. Comb graft copolymer PNBgPS was synthesized via ring opening metathesis polymerization of the macromonomer under the catalysis of ruthenium carbene complex RuCl2(PPh3)2(=CCHtBu) and its polymer supported correspondent. Experimental results showed that the behavior of both the supported boron and supported ruthenium catalysts are superior to their unsupported counterparts. The possible promotion mechanism of the tailor-made supports is discussed.展开更多
This work aimed at investigating the feasibility of surface modification of cellulose nanocrystals (CNCs) using <em>in situ</em> ring opening polymerization of <em>ε</em>-caprolactone (<em&...This work aimed at investigating the feasibility of surface modification of cellulose nanocrystals (CNCs) using <em>in situ</em> ring opening polymerization of <em>ε</em>-caprolactone (<em>ε</em>-CL) at room temperature. Residues of flax and milkweed (<em>Asclepias syriaca</em>) stem fibers were used as a source of cellulose to obtain and isolate CNCs. The cationic ring opening polymerization (CROP) of the monomer <em>ε</em>-CL was used to covalently graft polycaprolactone (PCL) chains at the CNCs surface. Silver hexafluoroantimonate (AgSbF<sub>6</sub>) was used in combination with the extracted CNCs to initiate, at room temperature, the polymerization and the grafting reactions with no other stimulus. Fourier-Transform InfraRed (FTIR), X-ray Photoelectron Spectrometry (XPS), UV/visible absorption and Gel Permeation Chromatography (GPC) analyses evidenced the presence of PCL chains covalently grafted at CNCs surface, the formation of Ag(0) particles as well as low or moderate molecular weight free PCL chains.展开更多
Cutting-edge research has primarily focused on flow synthesis of linear block copolymers,lacking the ability for manipulating chain architectures for more extensive applications.Herein,we develop a flow chemistry plat...Cutting-edge research has primarily focused on flow synthesis of linear block copolymers,lacking the ability for manipulating chain architectures for more extensive applications.Herein,we develop a flow chemistry platform for the continuous microflow synthesis of bottlebrush block copolymers(BBCPs)using a grafting-through method.This involves performing ring-opening metathesis polymerization(ROMP)of two different macromonomers within two microfluidic reactors connected in series.The microflow environment allows for complete monomer conversion within a few tens of seconds,benefiting from the superior mixing efficiency achieved in Z-shaped channels as indicated by both theoretical simulations and experimental results.Consequently,a library of well-defined BBCPs of up to 528 distinct samples can be produced within one day through automation of the continuous procedure,while keeping precise control on degree of polymerization(DP<4)and polydispersity indices(PDI<1.2).The synthetic method is generally applicable to different macromonomers with different compositions and contour lengths,yielding libraries of branched block copolymers with great diversity in physiochemical properties and chain architectures.This work presents a powerful platform for high-throughput production of branched copolymers,significantly lowering the costs of the materials for real applications.展开更多
A new cyclic monomer, 2-oxo-3-methylene-5, 6-diphenyl-1, 4-dioxan, was synthesized. Thestructure of the intermediates and the monomer were determined by IR,~1H NMR,^(13)C NMR andelemental analysis. This new monomer is...A new cyclic monomer, 2-oxo-3-methylene-5, 6-diphenyl-1, 4-dioxan, was synthesized. Thestructure of the intermediates and the monomer were determined by IR,~1H NMR,^(13)C NMR andelemental analysis. This new monomer is different from other cyclic monomers in this series,it isa solid (mp 108--109℃)and not very reactive, but still can undergo free radical ring-openingpolymerization. The free radical polymerization was carried out at 130℃. The structure of theresulting polymer was discussed and charaterized by IR, ~1H NMR, ^(13)C NMR and elementalanalysis. The molecular weight of the polymer was estimated by viscosity determination.展开更多
A new cyclic monomer, 2-methyl-2-methocycarbonyl-5-methylene 1,3-dioxlan-4-one,wassynthesized successfully. The monomer and intermediate were characterized by ~1H NMR,^(13)C NMR, INEPT (Intensive Nuclei Enhanced by Po...A new cyclic monomer, 2-methyl-2-methocycarbonyl-5-methylene 1,3-dioxlan-4-one,wassynthesized successfully. The monomer and intermediate were characterized by ~1H NMR,^(13)C NMR, INEPT (Intensive Nuclei Enhanced by Polarization Transfer) technique, IR andelemental analysis. Anionic polymerization of the monomer was carried out in anhydrous THF at.70℃, and 9-fluorenyllithium was used as initiator. The polymer strucure was determined byIR, NMR and elemental analysis. Molecular weight of the polymer was estimated by viscositymeasurement in DMSO at 30℃.展开更多
A new cyclic monomer, 2-methyl-2-methoxycarbonyl-5-methylene-1,3-dioxolan-4-one,was synthesized successfully. The monomer and intermediate were characterized by ~1H NMR, ^(13)CNMR, INEPT(Intensive Nuclei Enhanced by P...A new cyclic monomer, 2-methyl-2-methoxycarbonyl-5-methylene-1,3-dioxolan-4-one,was synthesized successfully. The monomer and intermediate were characterized by ~1H NMR, ^(13)CNMR, INEPT(Intensive Nuclei Enhanced by Polarization Transfer) technique, IR and elementalanalysis. Anionic polymerization of the monomer was carried out in anhydrous THF at -70℃,and 9-fluorenyllithium was used as initiator. The polymer structure was determined by IR, NMRand elemental analysis. Molecular weight of the polymer was estimated by viscosity measurementin DMSO at 30℃.展开更多
The novel cyclic monomer, 2-oxo-3-methylene-5-phenyl-1,4-dioxan, was synthesized by a set of reactions. Several intermediates were prepared and characterized in order to determine the monomer structure. The presence o...The novel cyclic monomer, 2-oxo-3-methylene-5-phenyl-1,4-dioxan, was synthesized by a set of reactions. Several intermediates were prepared and characterized in order to determine the monomer structure. The presence of chiral centers in the intermediates and resulting monomer makes it complicated to separate , purify and characterize them. It is a very reactive monomer which will polymerize even at room temperature if expose to moisture and air. This monomer can undergo essentially quantitative flee radical ring opening polymerization. The driving force for ring opening is the formation of new carbonyl group and benzylic radical. The monomer and polymer structure were established by IR, ~1H NMR, ^(13)C NMR and elemental analysis or high resolution mass spectrum. The molecular weight of the resulting polymer was estimated by viscosity determination.展开更多
The reactivities of benzoxazine functionalized amine bridged bis(phenol)s LnH_(2)(n=1—3)with rare earth metal complexes were explored,founding that both the aryl substituents of the ligand and the rare earth metals h...The reactivities of benzoxazine functionalized amine bridged bis(phenol)s LnH_(2)(n=1—3)with rare earth metal complexes were explored,founding that both the aryl substituents of the ligand and the rare earth metals have profound influences on reaction outcomes.展开更多
A series of Schiff base aluminum(III) complexes bearing morpholinomethyl substituents were synthesized. Comprehensive investigations on their stereoselective and kinetic features in the ring opening polymerization of ...A series of Schiff base aluminum(III) complexes bearing morpholinomethyl substituents were synthesized. Comprehensive investigations on their stereoselective and kinetic features in the ring opening polymerization of lactide were carried out. The ring opening polymerization proved to be first-order in the catalyst and the monomer. Linear relationships between the numberaverage molecular weight of the polylactide and the monomer conversion were consistent with a well-controlled polymerization. The propagation rate was strongly affected by morpholinomethyl substituents on the salicylaldehyde moiety.展开更多
Newly designed miktoarm star-shaped copolymers made of poly[(benzyl methacrylate(BMA)-co-(ε-caprolacton)(CL)] and poly[(BMA-b-MMA-b-BMA)-co-ε-caprolacton)(CL)] were synthesized by combining ring-opening polymerizati...Newly designed miktoarm star-shaped copolymers made of poly[(benzyl methacrylate(BMA)-co-(ε-caprolacton)(CL)] and poly[(BMA-b-MMA-b-BMA)-co-ε-caprolacton)(CL)] were synthesized by combining ring-opening polymerization (ROP) of ε-caprolactone (CL) and poly(BMA) five membered lacton fuctionalized prepared via atom transfer radical polymerization (ATRP) of BMA, and ε-CL and P(BMA-b-MMA-b-BMA) dual functionalized diblock copolymer, in the presence of tin(II) bis(2-ethylhexanoate) (Sn(Oct)2). Although lactone ended poly(benzyl methacrylate) with ε-caprolactone monomer gave ring open polymerization by Sn(Oct)2, the macromonomer itself did not give any poly- merization The macromonomers, and the miktoarm star-shaped copolymers were analyzed by FT-IR and 1H-NMR spectroscopies and GPC (gel permeation chromatograph), Differential scanning calorimetry (DSC-50) and termo- gravimetric analysis (TGA-50). These copolymers exhibited the expected structure. The crystallization of star-shaped copolymers was studied by DSC. The results show that when the content of the BMA block increased, the Tm of the star-shaped block copolymer increased.展开更多
Dendrimer-like amphiphilic copolymer is a kind of three-dimensional spherical structure polymer. An amphiphilic dendrimer-like diblock copolymer, PEEGE-G2-b-PEO（OH）12, constituted of a hydrophobic poly（ethoxyethyl ...Dendrimer-like amphiphilic copolymer is a kind of three-dimensional spherical structure polymer. An amphiphilic dendrimer-like diblock copolymer, PEEGE-G2-b-PEO（OH）12, constituted of a hydrophobic poly（ethoxyethyl glycidol ether） inner core and a hydrophilic poly（ethylene oxide） outer layer, has been successfully synthesized by the living anionic ring-opening polymerization method. The intermediates and targeted products were charac-terized with 1H NMR spectroscopy and gel permeation chromatography. The application on drug delivery of dendrimer-like diblock copolymer PEEGE-G2-b-PEO（OH）12 using DOX as a model drug was also studied. The drug loading content and encapsulation e ciency were found at 13.07% and 45.75%, respectively. In vitro release experiment results indicated that the drug-loaded micelles exhibited a sustained release behavior under acidic media.展开更多
We investigated the ring opening polymerization （ROP） of di- and tri-ethylene glycol monomethyl ether functionalized L-glutamate N-carboxyanhydrides （NCAs） using hexamethyldisilazane （HMDS） as primary initiator ...We investigated the ring opening polymerization （ROP） of di- and tri-ethylene glycol monomethyl ether functionalized L-glutamate N-carboxyanhydrides （NCAs） using hexamethyldisilazane （HMDS） as primary initiator and 1,5,7-triazabicyclo-[4.4.0]dec-5-ene （TBD） as co-initiator. The binary initiator system afforded a living ROP for these pegylated NCAs, and a series of homopolypeptides with controlled molecular weight （MW） and low polydispersity were obtained. We then systematically studied the helical content and clouding point （CP） dependence on polypeptide MW using circular dichroism （CD） spectroscopy and turbidity measurements, respectively. We found that the helical content of both homopolypeptides increased with MW, but the triethylene glycol functionalized poly-L-glutamate （poly-L-EG3Glu） intended to form more stable or-helical structure than diethylene glycol functionalized counterpart （poly-L-EG2Glu） at similar MW. Accordingly, the CP of poly-L-EG2Glu with known end group has strong dependence on its helical content, which is essentially determined by MW. Our results suggested that the thermal responsive properties of these unique pegylated poly- L-glutamates not only rely on their chemical structure but also on their secondary structures, wh^ch is different from conventional thermal responsive polymers.展开更多
基金financially supported by the National Natural Science Foundation of China(Nos.21901020 and 22003076)China Postdoctoral Science Foundation(No.2021M701818)+1 种基金Shandong Provincial Natural Science Foundation(No.ZR2022QE237)the Qingdao Postdoctoral Applied Research Project.H.Liu sincerely acknowledges financial support from the Taishan Scholars Program(No.tsqn202211165)。
文摘High catalytic efficiencies in ring opening polymerization(ROP)of a large ring-sized macrolactone,ω-pentadecalactone(PDL),by using transition metal Fe(II)-based catalysts were achieved for the first time in this study.Benefited from the bulky nature of the ligatedα-diimine ligands,as evidenced from single-crystal structures,as well as the weakly oxophilic nature of the metal centers,chain transesterification reactions could be partially suppressed,allowing the polymerization proceed in a living-like and semi-controllable manner,i.e.good linear dependence of propagation rates on catalyst concentration and PDL concentration as observed in the detailed kinetics studies.The whole polymerization proceeds via a“coordination-insertion”mechanism,and with the aid of density functional theory(DFT)calculation studies,a“slow insertion→fast elimination”manner was demonstrated for the monomer propagation step,suggesting the insertion of Fe-OR into the carbonyl group C=O as the rate-determining step.The present catalytic system also showed fast chain transfer reactions to alcohol compounds,affording quasi-immortal characteristics.DFT calculations showed that such a transfer reaction only required an energy barrier of 6.4 kcal/mol,performing a good consistency with the fast chain transfer rates.
基金supported by the Deanship of Scientific Research,King Saud University(No.M/202) and SABIC Company
文摘Three Keggin-type heteropolyanions, namely H3PMo12O40-13H2O, （NH4）3PMo12O40·4H2O and H3PW12O40·13H2O were prepared and tested in the ring-opening polymerization reaction of tetrahydrofuran. The effects of the counter-cation （H＋, NH4＋） and the peripheral atoms （Mo, W） on the polymerization were investigated. It has been found that when the protons of H3PMo12O40·13H2O were replaced by the ammonium cations the polymerization rate decreased dramatically. Whereas, when the peripheral atoms （Mo） were replaced by their homologous （W）, the polymerization rate increased twofold. As for the viscosity average molecular weight （My） of polymer products, it was found that the high molecular weight （7930） was obtained by using H3PW12O40·13H2O. The molecular weight （My） obtained by H3PMo12O40·13H2O and （NH4）H3PMo12O40·13H2O was 6470 and 6810, respectively.
基金National Natural Science Foundation of China(No.51173008)
文摘The random copolymers of glutamic acid （LG） and aspartic acid （ASP）, poly（LG-co-ASP）, with designed compositions could be successfully synthesized via combination of N-carboxyanhydride ring opening copolymerization with debenzylation. Ring opening copolymerizations of y：benzyl-L-glutamate N-carboxyanhydride （BLG-NCA） and β-benzyl-Laspartate N-carboxyanhydride （BLA-NCA） were carried out by using different amines including triethylamine （TEA）, diethylamine, n-hexylamine （NHA）, triphenylamine, diphenylamine or aniline as initiators. All the 6 amines were highly efficient to get well-defined poly（BLG-co-BLA） copolymers with designed compositions although the polymerizations proceeded via different mechanisms （normal amine mechanism or/and activated monomer mechanism）, which are based on chemical structure of amines. The molecular weights of poly（BLG-co-BLA） copolymers could be mediated by both TEA concentration and polymerization time. Then, debenzylation ofpoly（BLG-co-BLA） copolymers was conducted to prepare the corresponding hydrophilic random eopolymers of poly（LG-co-ASP） with a-subunit structure in ASP structural units. The contents of LG structural units in poly（LG-co-ASP） copolymers matched with those of BLG-NCA in NCA-monomer feeds in ring opening copolymerizations initiated by NHA or TEA and were closed to the theoretical line. The diblock copolymer of poly（BLG-b-BLA） could also be synthesized via living NCA ring opening copolymerization by sequential addition of BLG- NCA and BLA-NCA.
文摘Ligand effect of the catalytic system WCl6-Et2AlCl for ring opening metathesis polymerization (ROMP) of dicyclopentadiene (DCPD) was investigated. The experimental results show that adding sterically hindered phenol-2. 6-di-tert-butylcresylol(DTBC) in the catalytic system not only can obviously increase the monomer conversion of polymerization but also improve the mechanical properties, such as notched impact strength (NIS), tensile strength (TS) ect. 5 of the synthesized polyicycolpentadiene (PDCPD). A similar effect can be observed by using a sterically hindered polymeric phenol - linear phenol formaldehyde resin (LPF) as a ligand.
文摘This paper reviewed some recent advances of ring opening metathesis polymerization (ROMP) in tailoring polymers with novel and controlled structures.
文摘Reaction of (MeC 5H 4) 3Ln with HOCH 2CH 2NMe 2 in tetrahydrofuran(THF) gives the new complexes [(MeC 5H 4) 2Ln(μ OCH 2CH 2NMe 2)] 2 (Ln=Sm, Y, Nd) with nitrogen functionalized μ alkoxide ligand. The complexes were characterized by elemental analysis and IR, and [(MeC 5H 4) 2Sm(μ OCH 2CH 2NMe 2)] 2 was structurally characterized by the X ray diffraction to be a dimer formed by two unsymmetric oxygen bridges. The complex has a tricyclic skeleton with the additional two Sm-N bonds via intramolecular coordination of OCH 2CH 2NMe 2. The coordination number of the central metal Sm is nine. The title complexes show good catalytic activity for ring opening polymerization of ε caprolactone.
文摘The cationic ring-opening polymerization of tetrahydrofiiran using maghnite-H~＋ is reported.Maghnite-H~＋,is a non-toxic solid catalyst issued from proton exchanged montmorillonite clay.Polytetrahydrofuran,also called ＂poly（butandiol） ether＂,with acetate and hydroxyl end groups was successfully synthesized.Effects of reaction temperature, weight ratio of initiator/monomer and reaction time on the conversion of monomer and on the molecular weight are investigated.A cationic mechanism of the reaction was proposed.This chemistry can be considered as a suitable route for preparing poly（THF） as a soft segment for thermoplastic elastomers.
文摘A new kind of polyesteramide based on 3-morpholinone and e caprolactone was synthesized by ring opening polymerization with zinc powder as catalyst.The polymer was characterized by^(1)H NMR,GPC and FT-IR.The effect of time,temperature and ratio of m(M)/m(1),n(M)/n(CL)on the reaction was studied.The results show that the optimal reaction temperature is 120℃;the optimal duration of reaction is 24 h;the optimal ratio of m(M)/m(CL)is 50:1;the optimal ratio of n(M)/n(CL)is 1:2.Under the optimal condition the polymer whose M_(n)was 13509 could be obtained while the weight yield was 79%.
基金National Natural Science Foundation of China (Project grant No.: 29874018)
文摘Chloromethyl-2-norbornene was synthesized via Diels-Alder reaction of cyclopentadiene and allyl chloride using a polymer supported boron trifluoride as the catalyst, and was then lithiated and used to initiate a living anionic polymerization of styrene to prepare a macromonome, 5-polystyryl-2-norbornene NBPS. Comb graft copolymer PNBgPS was synthesized via ring opening metathesis polymerization of the macromonomer under the catalysis of ruthenium carbene complex RuCl2(PPh3)2(=CCHtBu) and its polymer supported correspondent. Experimental results showed that the behavior of both the supported boron and supported ruthenium catalysts are superior to their unsupported counterparts. The possible promotion mechanism of the tailor-made supports is discussed.
文摘This work aimed at investigating the feasibility of surface modification of cellulose nanocrystals (CNCs) using <em>in situ</em> ring opening polymerization of <em>ε</em>-caprolactone (<em>ε</em>-CL) at room temperature. Residues of flax and milkweed (<em>Asclepias syriaca</em>) stem fibers were used as a source of cellulose to obtain and isolate CNCs. The cationic ring opening polymerization (CROP) of the monomer <em>ε</em>-CL was used to covalently graft polycaprolactone (PCL) chains at the CNCs surface. Silver hexafluoroantimonate (AgSbF<sub>6</sub>) was used in combination with the extracted CNCs to initiate, at room temperature, the polymerization and the grafting reactions with no other stimulus. Fourier-Transform InfraRed (FTIR), X-ray Photoelectron Spectrometry (XPS), UV/visible absorption and Gel Permeation Chromatography (GPC) analyses evidenced the presence of PCL chains covalently grafted at CNCs surface, the formation of Ag(0) particles as well as low or moderate molecular weight free PCL chains.
基金financially supported by the National Natural Science Foundation of China(No.22071176)。
文摘Cutting-edge research has primarily focused on flow synthesis of linear block copolymers,lacking the ability for manipulating chain architectures for more extensive applications.Herein,we develop a flow chemistry platform for the continuous microflow synthesis of bottlebrush block copolymers(BBCPs)using a grafting-through method.This involves performing ring-opening metathesis polymerization(ROMP)of two different macromonomers within two microfluidic reactors connected in series.The microflow environment allows for complete monomer conversion within a few tens of seconds,benefiting from the superior mixing efficiency achieved in Z-shaped channels as indicated by both theoretical simulations and experimental results.Consequently,a library of well-defined BBCPs of up to 528 distinct samples can be produced within one day through automation of the continuous procedure,while keeping precise control on degree of polymerization(DP<4)and polydispersity indices(PDI<1.2).The synthetic method is generally applicable to different macromonomers with different compositions and contour lengths,yielding libraries of branched block copolymers with great diversity in physiochemical properties and chain architectures.This work presents a powerful platform for high-throughput production of branched copolymers,significantly lowering the costs of the materials for real applications.
文摘A new cyclic monomer, 2-oxo-3-methylene-5, 6-diphenyl-1, 4-dioxan, was synthesized. Thestructure of the intermediates and the monomer were determined by IR,~1H NMR,^(13)C NMR andelemental analysis. This new monomer is different from other cyclic monomers in this series,it isa solid (mp 108--109℃)and not very reactive, but still can undergo free radical ring-openingpolymerization. The free radical polymerization was carried out at 130℃. The structure of theresulting polymer was discussed and charaterized by IR, ~1H NMR, ^(13)C NMR and elementalanalysis. The molecular weight of the polymer was estimated by viscosity determination.
文摘A new cyclic monomer, 2-methyl-2-methocycarbonyl-5-methylene 1,3-dioxlan-4-one,wassynthesized successfully. The monomer and intermediate were characterized by ~1H NMR,^(13)C NMR, INEPT (Intensive Nuclei Enhanced by Polarization Transfer) technique, IR andelemental analysis. Anionic polymerization of the monomer was carried out in anhydrous THF at.70℃, and 9-fluorenyllithium was used as initiator. The polymer strucure was determined byIR, NMR and elemental analysis. Molecular weight of the polymer was estimated by viscositymeasurement in DMSO at 30℃.
文摘A new cyclic monomer, 2-methyl-2-methoxycarbonyl-5-methylene-1,3-dioxolan-4-one,was synthesized successfully. The monomer and intermediate were characterized by ~1H NMR, ^(13)CNMR, INEPT(Intensive Nuclei Enhanced by Polarization Transfer) technique, IR and elementalanalysis. Anionic polymerization of the monomer was carried out in anhydrous THF at -70℃,and 9-fluorenyllithium was used as initiator. The polymer structure was determined by IR, NMRand elemental analysis. Molecular weight of the polymer was estimated by viscosity measurementin DMSO at 30℃.
文摘The novel cyclic monomer, 2-oxo-3-methylene-5-phenyl-1,4-dioxan, was synthesized by a set of reactions. Several intermediates were prepared and characterized in order to determine the monomer structure. The presence of chiral centers in the intermediates and resulting monomer makes it complicated to separate , purify and characterize them. It is a very reactive monomer which will polymerize even at room temperature if expose to moisture and air. This monomer can undergo essentially quantitative flee radical ring opening polymerization. The driving force for ring opening is the formation of new carbonyl group and benzylic radical. The monomer and polymer structure were established by IR, ~1H NMR, ^(13)C NMR and elemental analysis or high resolution mass spectrum. The molecular weight of the resulting polymer was estimated by viscosity determination.
基金support fromtheNational Natural Science Foundation of China(21871198)the Major Research Project of the Natural Science of the Jiangsu Higher Education Institutions(19KJA360005),and PAPD.
文摘The reactivities of benzoxazine functionalized amine bridged bis(phenol)s LnH_(2)(n=1—3)with rare earth metal complexes were explored,founding that both the aryl substituents of the ligand and the rare earth metals have profound influences on reaction outcomes.
基金supported by the National Natural Science Foundation of China(51173183,51233004,51390484,51321062,51473029)
文摘A series of Schiff base aluminum(III) complexes bearing morpholinomethyl substituents were synthesized. Comprehensive investigations on their stereoselective and kinetic features in the ring opening polymerization of lactide were carried out. The ring opening polymerization proved to be first-order in the catalyst and the monomer. Linear relationships between the numberaverage molecular weight of the polylactide and the monomer conversion were consistent with a well-controlled polymerization. The propagation rate was strongly affected by morpholinomethyl substituents on the salicylaldehyde moiety.
基金The authors wish to thank the Firat University Research Fund for financial support of this Project(FUBAP-1650)M.Fatih Coskun,who provided chromatograms(GPC)at our university.
文摘Newly designed miktoarm star-shaped copolymers made of poly[(benzyl methacrylate(BMA)-co-(ε-caprolacton)(CL)] and poly[(BMA-b-MMA-b-BMA)-co-ε-caprolacton)(CL)] were synthesized by combining ring-opening polymerization (ROP) of ε-caprolactone (CL) and poly(BMA) five membered lacton fuctionalized prepared via atom transfer radical polymerization (ATRP) of BMA, and ε-CL and P(BMA-b-MMA-b-BMA) dual functionalized diblock copolymer, in the presence of tin(II) bis(2-ethylhexanoate) (Sn(Oct)2). Although lactone ended poly(benzyl methacrylate) with ε-caprolactone monomer gave ring open polymerization by Sn(Oct)2, the macromonomer itself did not give any poly- merization The macromonomers, and the miktoarm star-shaped copolymers were analyzed by FT-IR and 1H-NMR spectroscopies and GPC (gel permeation chromatograph), Differential scanning calorimetry (DSC-50) and termo- gravimetric analysis (TGA-50). These copolymers exhibited the expected structure. The crystallization of star-shaped copolymers was studied by DSC. The results show that when the content of the BMA block increased, the Tm of the star-shaped block copolymer increased.
文摘Dendrimer-like amphiphilic copolymer is a kind of three-dimensional spherical structure polymer. An amphiphilic dendrimer-like diblock copolymer, PEEGE-G2-b-PEO（OH）12, constituted of a hydrophobic poly（ethoxyethyl glycidol ether） inner core and a hydrophilic poly（ethylene oxide） outer layer, has been successfully synthesized by the living anionic ring-opening polymerization method. The intermediates and targeted products were charac-terized with 1H NMR spectroscopy and gel permeation chromatography. The application on drug delivery of dendrimer-like diblock copolymer PEEGE-G2-b-PEO（OH）12 using DOX as a model drug was also studied. The drug loading content and encapsulation e ciency were found at 13.07% and 45.75%, respectively. In vitro release experiment results indicated that the drug-loaded micelles exhibited a sustained release behavior under acidic media.
基金financially supported by the National Natural Science Foundation of China (Nos. 20974112 and 51225306)
文摘We investigated the ring opening polymerization （ROP） of di- and tri-ethylene glycol monomethyl ether functionalized L-glutamate N-carboxyanhydrides （NCAs） using hexamethyldisilazane （HMDS） as primary initiator and 1,5,7-triazabicyclo-[4.4.0]dec-5-ene （TBD） as co-initiator. The binary initiator system afforded a living ROP for these pegylated NCAs, and a series of homopolypeptides with controlled molecular weight （MW） and low polydispersity were obtained. We then systematically studied the helical content and clouding point （CP） dependence on polypeptide MW using circular dichroism （CD） spectroscopy and turbidity measurements, respectively. We found that the helical content of both homopolypeptides increased with MW, but the triethylene glycol functionalized poly-L-glutamate （poly-L-EG3Glu） intended to form more stable or-helical structure than diethylene glycol functionalized counterpart （poly-L-EG2Glu） at similar MW. Accordingly, the CP of poly-L-EG2Glu with known end group has strong dependence on its helical content, which is essentially determined by MW. Our results suggested that the thermal responsive properties of these unique pegylated poly- L-glutamates not only rely on their chemical structure but also on their secondary structures, wh^ch is different from conventional thermal responsive polymers.
