Block chain is widely used in the financial field for its characteristics of decentralization, anonymity and trust. Electronic money payment is an important application hotspot. Ring signature is widely used in strong...Block chain is widely used in the financial field for its characteristics of decentralization, anonymity and trust. Electronic money payment is an important application hotspot. Ring signature is widely used in strong anonymous authentication such as electronic cash and electronic voting because of its unconditional anonymity, spontaneity and flexible group structure. Among them, the correlation ring signature can prove whether two signatures are issued by the same person without revealing the identity of the real signer. Therefore, the signature right breach can be avoided based on the premise of guaranteeing anonymity, such as repeated voting, electronic money repetition cost and so on. Most of the existing correlation ring signature security is based on the discrete logarithm problem, and most of the schemes result in the degradation of anonymity because of strong association. These methods do not apply to the block chain electronic currency transaction scene with strong anonymity. Therefore, this paper first proposes a blockchain-based electronic currency transaction security model. The model ensures not only the anonymity of both parties but also a certain degree of traceability. In order to support these two characteristics, this paper proposes an association ring signature method based on large integer decomposition problem. This method has strong anonymity and can be applied to blockchain scenes. On the other hand, it can be converted into group signatures in specific scenarios. It is therefore traceable. Finally, the adaptive selection message of the scheme and the unforgeability under the selection of public key attack are proved under the random oracle model.展开更多
Stellite 720 is a high-carbon Co-Cr-Mo alloy, designed for severe wear/corrosion environments. This article presents a study of the Stellite 720 coating on stainless steel 304 under block-on-ring wear test. The coatin...Stellite 720 is a high-carbon Co-Cr-Mo alloy, designed for severe wear/corrosion environments. This article presents a study of the Stellite 720 coating on stainless steel 304 under block-on-ring wear test. The coating is deposited through a slurry/powder metallurgy sintering process. Micro-hardness indentation test is conducted on the cross section of the coating specimen to investigate the hardness of individual phases of the coating material and the dilution effect of the substrate material on the coating layer. The tribological behavior of the coating under low and high load wear is investigated. The worn surfaces of the coating specimens are analyzed using a Philips XL30S FEG scanning electron micro- scope (SEM) with an EDAX energy dispersive X-ray (EDX) spectroscopy system. The experimental results are discussed to explore the wear mechanisms of the Stellite 720 coating under block-on-ring wear.展开更多
Styrene-isoprene-styrene（SIS） block copolymer was modified into epoxidized styrene-isoprene-styrene（ESIS） block copolymer with performic acid generated in situ from hydrogen peroxide and formic acid.The structure ...Styrene-isoprene-styrene（SIS） block copolymer was modified into epoxidized styrene-isoprene-styrene（ESIS） block copolymer with performic acid generated in situ from hydrogen peroxide and formic acid.The structure and property of ESIS were characterized by Fourier transform infrared（FT-IR） spectroscopy,gel permeation chromatography（GPC）,thermogravimetric/differential thermogravimetric（TG/DTG）,melt flow rate（MFR） and dynamic mechanical analysis（DMA）,and the reaction mechanism in the process of epoxidation was analyzed.The results showed that C=C double bonds of 1,4-structure were more active than that of 3,4-structure in polyisoprene chains.With epoxidation reaction proceeding,the whole tendency of molecular weight increased and molecular weight distribution widened,and MFR firstly increased and latterly decreased.The heat resistance of ESIS was superior to that of SIS.When SIS was changed into ESIS with 15.3% of mass fraction of epoxide groups,Tg of polyisoprene chains increased from-45.3 ℃ to 10.9 ℃.In the earlier period of epoxidation,some molecular chains ruptured and new substances with low molecular weight formed.However,in the latter period,crosslinking reaction between molecular chains which was initiated by epoxide groups or C=C double bonds occurred and crosslinked insoluble substances came into being.展开更多
A series of cis-5-norbornene-endo-2,3-dicarboxylic anhydride （NDCA, M1） derivatives （M2-M4） with different types of nonpolar substituted groups were synthesized and characterized by 1H/13C-NMR and mass spectromet...A series of cis-5-norbornene-endo-2,3-dicarboxylic anhydride （NDCA, M1） derivatives （M2-M4） with different types of nonpolar substituted groups were synthesized and characterized by 1H/13C-NMR and mass spectrometry （MS）. Ring- opening metathesis polymerization （ROMP） of these monomers using the Grubbs third generation catalyst （G3） generated high molecular weight polymers with much improved solubility compared with the NDCA＇s homopolymer. It was found that the solubility of these polymers increased with increased substituent＇s steric hindrance. The living polymerization of NDCA derivative containing the bulkiest substituent （M4） catalyzed by G3 in tetrahydrofuran was confirmed by the kinetic studies with low polydispersity indices （PDI） （〈 1.30）. By using sequential ROMP, well-defined diblock copolymers containing anhydride groups were synthesized.展开更多
A biodegradable ABBA block copolymer was synthesized via the ring-opening co-polymerization of ~ε-caprolactone(CL, B) and glycolide(A) by means of step polymerization in the presence of ethylene glycol as an initiato...A biodegradable ABBA block copolymer was synthesized via the ring-opening co-polymerization of ~ε-caprolactone(CL, B) and glycolide(A) by means of step polymerization in the presence of ethylene glycol as an initiator and stannous octanoate as a catalyst at 110 ℃ for 48 h. The molecular length of the PCL pre-polymer(BB) could be adjusted by controlling the molar ratio of the ethylene glycol initiator to ε-caprolactone monomer. The structure and the composition of the block copolymer were determined by the weight ratio of the monomer glycolide(A) to PCL pre-polymer(BB). The block copolymers were characterized by ~ 1H NMR, GPC, DSC and X-ray. The results confirm the successful synthesis of an ABBA block copolymer.展开更多
Poly(methyl acrylate)-b-poly(5,6-benzo-2-methylene-1,3-dioxepane) (PMA-b-PBMDO) was synthesized by two-step atom transfer radical polymerization (ATRP). Firstly, ATRP of methyl acrylate (MA) was realized using ethyl a...Poly(methyl acrylate)-b-poly(5,6-benzo-2-methylene-1,3-dioxepane) (PMA-b-PBMDO) was synthesized by two-step atom transfer radical polymerization (ATRP). Firstly, ATRP of methyl acrylate (MA) was realized using ethyl alpha-bromobutyrate (EBrB) as initiator in the presence of CuBr/2,2'-bipyridine. After isolation, poly(methyl acrylate) with terminal bromine (PMA-Br) was synthesized. Secondly, the resulting PMA-Br was used as a macromolecular initiator in the ATRP of BMDO. The structure of block copolymer was characterized by H-1-NMR spectroscopy. Molecular weight and molecular weight distribution were determined on a gel permeation chromatograph (GPC).展开更多
To assess the merits of PEGylated poly （lactic-co-glycolic acid） （PEG-PLGA） nanoparticles as drug carriers for tumor necrosis factor-α receptor blocking peptide （TNFR-BP）, PEG-PLGA copolymer, which could be use...To assess the merits of PEGylated poly （lactic-co-glycolic acid） （PEG-PLGA） nanoparticles as drug carriers for tumor necrosis factor-α receptor blocking peptide （TNFR-BP）, PEG-PLGA copolymer, which could be used to prepare the stealth nanoparticles, was synthesized with methoxypolyethyleneglycol, DL-lactide and glycolide. The structure of PEG-PLGA was confirmed with ^1H-NMR and FT-IR spectroscopy, and the molecular weight （MW） was determined by gel permeation chromatography. Fluorescent FITC-TNFR- BP was chosen as model protein and encapsulated within PEG-PLGA nanoparticles using the double emulsion method. Atomic force microscopy and photon correlation spectroscopy were employed to characterize the stealth nanoparticles fabricated for morphology, size with polydispersity index and zeta potential. Encapsulation efficiency （EE） and the release of FITC-TNFR-BP in nanopartieles in vitro were measured by the fluorescence measurement. The stealth nanoparticles were found to have the mean diameter less than 270 nm and zeta potential less than -20 mV. In all nanoparticle formulations, more than 45% of EE were obtained. FITC-TNFR-BP release from the PEG-PLGA nanoparticles exhibited a biphasic pattern, initial burst release and consequently sustained release. The experimental results show that PEG-PLGA nanoparticles possess the potential to develop as drug carriers for controlled release applications of TNFR-BP.展开更多
The entire roller inlayed block intelligence cold strip shape meter is developed successfully in this paper,which can stably work chronically in the cold rolling workshop,the independent innovation of the key technolo...The entire roller inlayed block intelligence cold strip shape meter is developed successfully in this paper,which can stably work chronically in the cold rolling workshop,the independent innovation of the key technology of cold strip shape measuring,the foreign technical monopoly and blockade are broken through.The structural form which is different from the international popular segmented detection roller is put forward,the entire detection roller inlayed block is developed,a group of elastic blocks in that the sense organs are installed are inlayed in the radial symmetry rectangular grooves of the detection roller body,the entire roller structure is composed of elastic pieces and the roller body,the scratch of the strip surface due to different thermal expansion of the traditional detection roller measuring unit is avoided effectively.The signal transmission form which is different form the international popular dry slip ring is put forward,the spray wet slip ring is developed,slip ring and detection roller can be taken down and installed as possibly as fast,so the maintain is convenient,while through the section auto-spray cleaning,lubrication and cooling, the service life is remarkable improved and the outside interference signal is reduced.The signal processing form which is different form the international popular gathering card is put forward,the embedded DSP shape signal processing hardware system is developed,the electromagnet,temperature,humidity and vibration's interference of industry practice to shape transmission signal can be effectively avoided,which can guarantee the instantaneity and measured precision of shape measured signal.The shape signal processing software system whose function contains error compensation,pattern recognition,establishment of the target shape and the closed-loop control calculation is built,the shape meter' computer human interaction is friendly,and function of shape meter is strong,at the same time the intellectualized level of the shape meter is improved.Now,this shape meter has been successfully applied on the 1 250 mm cold strip mill of Angang Steel Company Limited,the long-term operating testing is done,every guide line achieves the anticipative effect,the measuring precision is high and the measuring signal is stable and reliable,the shape meter is tested on high speed,big tension,changed wrap angle and big depressed complicated working conditions,any scratch of the detection roller surface and the strip surface is not appearing,it can completely adapt well to the industrial production environment,reaching the international advanced level.展开更多
基金Supported by the National Natural Science Foundation of China(U1304614,U1204703)the Construct Program of the Key Discipline in Zhengzhou Normal UniversityAid Program for Science and Technology Innovative Research Team of Zhengzhou Normal University,Henan Province Education Science Plan General Topic((2018)-JKGHYB-0279)
文摘Block chain is widely used in the financial field for its characteristics of decentralization, anonymity and trust. Electronic money payment is an important application hotspot. Ring signature is widely used in strong anonymous authentication such as electronic cash and electronic voting because of its unconditional anonymity, spontaneity and flexible group structure. Among them, the correlation ring signature can prove whether two signatures are issued by the same person without revealing the identity of the real signer. Therefore, the signature right breach can be avoided based on the premise of guaranteeing anonymity, such as repeated voting, electronic money repetition cost and so on. Most of the existing correlation ring signature security is based on the discrete logarithm problem, and most of the schemes result in the degradation of anonymity because of strong association. These methods do not apply to the block chain electronic currency transaction scene with strong anonymity. Therefore, this paper first proposes a blockchain-based electronic currency transaction security model. The model ensures not only the anonymity of both parties but also a certain degree of traceability. In order to support these two characteristics, this paper proposes an association ring signature method based on large integer decomposition problem. This method has strong anonymity and can be applied to blockchain scenes. On the other hand, it can be converted into group signatures in specific scenarios. It is therefore traceable. Finally, the adaptive selection message of the scheme and the unforgeability under the selection of public key attack are proved under the random oracle model.
文摘Stellite 720 is a high-carbon Co-Cr-Mo alloy, designed for severe wear/corrosion environments. This article presents a study of the Stellite 720 coating on stainless steel 304 under block-on-ring wear test. The coating is deposited through a slurry/powder metallurgy sintering process. Micro-hardness indentation test is conducted on the cross section of the coating specimen to investigate the hardness of individual phases of the coating material and the dilution effect of the substrate material on the coating layer. The tribological behavior of the coating under low and high load wear is investigated. The worn surfaces of the coating specimens are analyzed using a Philips XL30S FEG scanning electron micro- scope (SEM) with an EDAX energy dispersive X-ray (EDX) spectroscopy system. The experimental results are discussed to explore the wear mechanisms of the Stellite 720 coating under block-on-ring wear.
文摘Styrene-isoprene-styrene（SIS） block copolymer was modified into epoxidized styrene-isoprene-styrene（ESIS） block copolymer with performic acid generated in situ from hydrogen peroxide and formic acid.The structure and property of ESIS were characterized by Fourier transform infrared（FT-IR） spectroscopy,gel permeation chromatography（GPC）,thermogravimetric/differential thermogravimetric（TG/DTG）,melt flow rate（MFR） and dynamic mechanical analysis（DMA）,and the reaction mechanism in the process of epoxidation was analyzed.The results showed that C=C double bonds of 1,4-structure were more active than that of 3,4-structure in polyisoprene chains.With epoxidation reaction proceeding,the whole tendency of molecular weight increased and molecular weight distribution widened,and MFR firstly increased and latterly decreased.The heat resistance of ESIS was superior to that of SIS.When SIS was changed into ESIS with 15.3% of mass fraction of epoxide groups,Tg of polyisoprene chains increased from-45.3 ℃ to 10.9 ℃.In the earlier period of epoxidation,some molecular chains ruptured and new substances with low molecular weight formed.However,in the latter period,crosslinking reaction between molecular chains which was initiated by epoxide groups or C=C double bonds occurred and crosslinked insoluble substances came into being.
基金financially supported by the National Natural Science Foundation of China(Nos.21234006 and 21574098)
文摘A series of cis-5-norbornene-endo-2,3-dicarboxylic anhydride （NDCA, M1） derivatives （M2-M4） with different types of nonpolar substituted groups were synthesized and characterized by 1H/13C-NMR and mass spectrometry （MS）. Ring- opening metathesis polymerization （ROMP） of these monomers using the Grubbs third generation catalyst （G3） generated high molecular weight polymers with much improved solubility compared with the NDCA＇s homopolymer. It was found that the solubility of these polymers increased with increased substituent＇s steric hindrance. The living polymerization of NDCA derivative containing the bulkiest substituent （M4） catalyzed by G3 in tetrahydrofuran was confirmed by the kinetic studies with low polydispersity indices （PDI） （〈 1.30）. By using sequential ROMP, well-defined diblock copolymers containing anhydride groups were synthesized.
文摘A biodegradable ABBA block copolymer was synthesized via the ring-opening co-polymerization of ~ε-caprolactone(CL, B) and glycolide(A) by means of step polymerization in the presence of ethylene glycol as an initiator and stannous octanoate as a catalyst at 110 ℃ for 48 h. The molecular length of the PCL pre-polymer(BB) could be adjusted by controlling the molar ratio of the ethylene glycol initiator to ε-caprolactone monomer. The structure and the composition of the block copolymer were determined by the weight ratio of the monomer glycolide(A) to PCL pre-polymer(BB). The block copolymers were characterized by ~ 1H NMR, GPC, DSC and X-ray. The results confirm the successful synthesis of an ABBA block copolymer.
基金This work was supported by the National Natural Science Foundation of China (No. 29774027).
文摘Poly(methyl acrylate)-b-poly(5,6-benzo-2-methylene-1,3-dioxepane) (PMA-b-PBMDO) was synthesized by two-step atom transfer radical polymerization (ATRP). Firstly, ATRP of methyl acrylate (MA) was realized using ethyl alpha-bromobutyrate (EBrB) as initiator in the presence of CuBr/2,2'-bipyridine. After isolation, poly(methyl acrylate) with terminal bromine (PMA-Br) was synthesized. Secondly, the resulting PMA-Br was used as a macromolecular initiator in the ATRP of BMDO. The structure of block copolymer was characterized by H-1-NMR spectroscopy. Molecular weight and molecular weight distribution were determined on a gel permeation chromatograph (GPC).
基金Funded by the National 863 Project of China (No. 2004AA215162)
文摘To assess the merits of PEGylated poly （lactic-co-glycolic acid） （PEG-PLGA） nanoparticles as drug carriers for tumor necrosis factor-α receptor blocking peptide （TNFR-BP）, PEG-PLGA copolymer, which could be used to prepare the stealth nanoparticles, was synthesized with methoxypolyethyleneglycol, DL-lactide and glycolide. The structure of PEG-PLGA was confirmed with ^1H-NMR and FT-IR spectroscopy, and the molecular weight （MW） was determined by gel permeation chromatography. Fluorescent FITC-TNFR- BP was chosen as model protein and encapsulated within PEG-PLGA nanoparticles using the double emulsion method. Atomic force microscopy and photon correlation spectroscopy were employed to characterize the stealth nanoparticles fabricated for morphology, size with polydispersity index and zeta potential. Encapsulation efficiency （EE） and the release of FITC-TNFR-BP in nanopartieles in vitro were measured by the fluorescence measurement. The stealth nanoparticles were found to have the mean diameter less than 270 nm and zeta potential less than -20 mV. In all nanoparticle formulations, more than 45% of EE were obtained. FITC-TNFR-BP release from the PEG-PLGA nanoparticles exhibited a biphasic pattern, initial burst release and consequently sustained release. The experimental results show that PEG-PLGA nanoparticles possess the potential to develop as drug carriers for controlled release applications of TNFR-BP.
文摘The entire roller inlayed block intelligence cold strip shape meter is developed successfully in this paper,which can stably work chronically in the cold rolling workshop,the independent innovation of the key technology of cold strip shape measuring,the foreign technical monopoly and blockade are broken through.The structural form which is different from the international popular segmented detection roller is put forward,the entire detection roller inlayed block is developed,a group of elastic blocks in that the sense organs are installed are inlayed in the radial symmetry rectangular grooves of the detection roller body,the entire roller structure is composed of elastic pieces and the roller body,the scratch of the strip surface due to different thermal expansion of the traditional detection roller measuring unit is avoided effectively.The signal transmission form which is different form the international popular dry slip ring is put forward,the spray wet slip ring is developed,slip ring and detection roller can be taken down and installed as possibly as fast,so the maintain is convenient,while through the section auto-spray cleaning,lubrication and cooling, the service life is remarkable improved and the outside interference signal is reduced.The signal processing form which is different form the international popular gathering card is put forward,the embedded DSP shape signal processing hardware system is developed,the electromagnet,temperature,humidity and vibration's interference of industry practice to shape transmission signal can be effectively avoided,which can guarantee the instantaneity and measured precision of shape measured signal.The shape signal processing software system whose function contains error compensation,pattern recognition,establishment of the target shape and the closed-loop control calculation is built,the shape meter' computer human interaction is friendly,and function of shape meter is strong,at the same time the intellectualized level of the shape meter is improved.Now,this shape meter has been successfully applied on the 1 250 mm cold strip mill of Angang Steel Company Limited,the long-term operating testing is done,every guide line achieves the anticipative effect,the measuring precision is high and the measuring signal is stable and reliable,the shape meter is tested on high speed,big tension,changed wrap angle and big depressed complicated working conditions,any scratch of the detection roller surface and the strip surface is not appearing,it can completely adapt well to the industrial production environment,reaching the international advanced level.
