Zinc-ion batteries(ZIBs)are inexpensive and safe,but side reactions on the Zn anode and Zn dendrite growth hinder their practical applications.In this study,1,3,5-triformylphloroglycerol(Tp)and various diamine monomer...Zinc-ion batteries(ZIBs)are inexpensive and safe,but side reactions on the Zn anode and Zn dendrite growth hinder their practical applications.In this study,1,3,5-triformylphloroglycerol(Tp)and various diamine monomers(p-phenylenediamine(Pa),benzidine(BD),and 4,4"-diamino-p-terphenyl(DATP))were used to synthesize a series of two-dimensional covalent-organic frameworks(COFs).The resulting COFs were named TpPa,TpBD,and TpDATP,respectively,and they showed uniform zincophilic sites,different pore sizes,and high Young's moduli on the Zn anode.Among them,TpPa and TpBD showed lower surface work functions and higher ion transfer numbers,which were conducive to uniform galvanizing/stripping zinc and inhibited dendrite growth.Theoretical calculations showed that TpPa and TpBD had wider negative potential region and greater adsorption capacity for Zn2+than TpDATP,providing more electron donor sites to coordinate with Zn^(2+).Symmetric cells protected by TpPa and TpBD stably cycled for more than 2300 h,whereas TpDATP@Zn and the bare zinc symmetric cells failed after around 150 and200 h.The full cells containing TpPa and TpBD modification layers also showed excellent cycling capacity at 1 A/g.This study provides comprehensive insights into the construction of highly reversible Zn anodes via COF modification layers for advanced rechargeable ZIBs.展开更多
Five cadmium naphthalene-diphosphonates,formulated as[Cd_(1.5)(1,4-ndpaH_(2))2(4,4'-bpyH)(4,4'-bpy)0.5(H_(2)O)_(2)]2(1),[Cd(1,4-ndpaH_(2))(1,4-bib)0.5(H_(2)O)](2),[Cd(1,4-ndpaH3)2(1,2-dpe)(H_(2)O)]·(1,2-d...Five cadmium naphthalene-diphosphonates,formulated as[Cd_(1.5)(1,4-ndpaH_(2))2(4,4'-bpyH)(4,4'-bpy)0.5(H_(2)O)_(2)]2(1),[Cd(1,4-ndpaH_(2))(1,4-bib)0.5(H_(2)O)](2),[Cd(1,4-ndpaH3)2(1,2-dpe)(H_(2)O)]·(1,2-dpe)·7H_(2)O(3),(1,2-bixH)[Cd3(1,4-ndpaH)(1,4-ndpaH_(2))2(H_(2)O)_(2)](4),and[Cd(1,4-ndpaH_(2))(H_(2)O)]·H_(2)O(5),have been synthesized from the selfassembly reactions of 1,4-naphthalenediphosphonic acid(1,4-ndpaH4)with Cd(NO3)2·4H_(2)O by introducing auxiliary ligands with variation of rigidity,such as 4,4'-bipyridine(4,4'-bpy),1,4-bis(1-imidazolyl)benzene(1,4-bib),1,2-di(4-pyridyl)ethylene(1,2-dpe),1,3-di(4-pyridyl)propane(1,3-dpp),and bis(imidazol-1-ylmethyl)benzene(1,2-bix),respectively.Structure resolution by single-crystal X-ray diffraction reveals that compound 1 possesses a layered framework,in which the{Cd3(PO2)2}trimers made up of corner-sharing two{CdO4N2}and one{CdO6}octahedra are connected by phosphonate groups,forming a ribbon,which are cross-linked by 4,4'-bipy ligands,forming a 2D layer.Compound 2 shows a 3D open-framework structure,where chains of corner-sharing{CdO4N}trigonal bipyramids and{PO3C}tetrahedra are cross-linked by 1,4-bib and/or phosphonate groups.A 1D ladder-like chain structure is found in compound 3,where the ladder-like chains made up of corner-sharing{CdO5N}octahedra and{PO3C}tetra hedra are connected by 1,4-ndpaH_(2)^(2-).Both compounds 4 and 5 obtained by the introduction of flexible ligands during the synthesis show a 2D layered structure,which is formed by ligand crosslinking double metal chains.Interestingly,In 4,flexible 1,2-bix was singly protonated,as vip molecules,filled between layer and layer,while flexible ligand 1,3-dpp is absent in 5.Photophysical measurements indicate that compounds 1-5 show ligand-centered emissions.展开更多
From[J.Differential Geom.,1990,31(1):285-299],one can obtain that compact self-shrinking hypersufaces in R^(n+1) with constant scalar curvature must be the standard sphere S^(n)(√n)(cf.[Front.Math.,2023,18(2):417-430...From[J.Differential Geom.,1990,31(1):285-299],one can obtain that compact self-shrinking hypersufaces in R^(n+1) with constant scalar curvature must be the standard sphere S^(n)(√n)(cf.[Front.Math.,2023,18(2):417-430]).This result was generalized by Guo[J.Math.Soc.Japan,2018,70(3):1103-1110]with assumption of a lower or upper scalar curvature bound.In this paper,we will generalize the scalar curvature rigidity theorem of Guo to the case of λ-hypersurfaces.We will also give an alternative proof of the theorem(cf.[2014,arXiv:1410.5302]and[Proc.Amer.Math.Soc.,2018,146(10):4459-4471])that λ-hypersurfaces which are entire graphs must be hyperplanes.展开更多
Two CoⅡ-based complexes,{[Co(dps)_(2)(N_(3))_(2)]·H_(2)O}_n(1)and[Co(dps)_(2)(N_(3))_(2)]_n(2),show a 1D chain and a 3D network,respectively.The central CoⅡions in the complexes have the same coordination envir...Two CoⅡ-based complexes,{[Co(dps)_(2)(N_(3))_(2)]·H_(2)O}_n(1)and[Co(dps)_(2)(N_(3))_(2)]_n(2),show a 1D chain and a 3D network,respectively.The central CoⅡions in the complexes have the same coordination environment with the[Co(dps)_(4)(N_(3))_(2)]unit.Although the differences in crystal parameters are nearly negligible,their magnetic properties are very different.AC susceptibility data show that 1 behaves as a typical field-induced single-ion magnet(SIM)with the out-of-phase(χ_(M)”)signals,while 2 shows ac signals ofχ_(M)”without peaks even under applied dc filed within our measurement window.Far-IR magneto-spectra(FIRMS)show strong spin-phonon couplings at 0 T in 2,likely making the magnetic relaxation in 2 fast,while the couplings are negligible in 1.Small spin-phonon coupling in 1 likely leads to slower magnetic relaxation,making 1 a SIM.The difference in the properties is due to the structural rigidity of 2 in its 3D network,leading to stronger spin-phonon coupling.Combined high-field EPR(HF-EPR)and FIRMS studies give spin-Hamiltonian parameters,including D=64.0(9)cm^(-1),|E|=15.7(2)cm^(-1)for 1 and D=80.0(2)cm^(-1),|E|=19.0(1)cm^(-1)for 2.展开更多
By introducing the Carathéodory metric,we establish the Schwarz lemma at the boundary for holomorphic self-mappings on the unit p-ball B_(p)^(n) of C^(n).Furthermore,the boundary rigidity theorem for holomorphic ...By introducing the Carathéodory metric,we establish the Schwarz lemma at the boundary for holomorphic self-mappings on the unit p-ball B_(p)^(n) of C^(n).Furthermore,the boundary rigidity theorem for holomorphic self-mappings defined on B_(n)^(p) is obtained.These results cover the boundary Schwarz lemma and rigidity result for holomorphic self-mappings on the unit ball for p=2,and the unit polydisk for p=∞,respectively.展开更多
The active sound absorption technique excels in mitigating low-frequency sound waves,yet it falls short when dealing with medium and high-frequency sound waves.To enhance the sound-absorbing effect of medium and high-...The active sound absorption technique excels in mitigating low-frequency sound waves,yet it falls short when dealing with medium and high-frequency sound waves.To enhance the sound-absorbing effect of medium and high-frequency sound waves,a novel semi-active sound absorption method has been introduced.This method modulates the surface impedance of a loudspeaker positioned behind the sound-absorbing material,thereby altering the sound absorption coefficient.The theoretical sound absorption coefficient is calculated using MATLAB and compared with the experimental one.Results show that the method can effectively modulates the absorption coefficient in response to varying incident sound wave frequencies,ensuring that it remains at its peak value.展开更多
The titanium alloy strut serves as a key load-bearing component of aircraft landing gear,typically manufactured via forging.The friction condition has important influence on material flow and cavity filling during the...The titanium alloy strut serves as a key load-bearing component of aircraft landing gear,typically manufactured via forging.The friction condition has important influence on material flow and cavity filling during the forging process.Using the previously optimized shape and initial position of preform,the influence of the friction condition(friction factor m=0.1–0.3)on material flow and cavity filling was studied by numerical method with a shear friction model.A novel filling index was defined to reflect material flow into left and right flashes and zoom in on friction-induced results.The results indicate that the workpiece moves rigidly to the right direction,with the displacement decreasing as m increases.When m<0.18,the underfilling defect will occur in the left side of strut forging,while overflow occurs in the right forging die cavity.By combining the filling index and analyses of material flow and filling status,a reasonable friction factor interval of m=0.21–0.24 can be determined.Within this interval,the cavity filling behavior demonstrates robustness,with friction fluctuations exerting minimal influence.展开更多
On April 2,the United States announced the implementation of the so-called“reciprocal tariffs”plan.Combined with factors such as the OPEC+plan to increase production starting in May,this led to a continuous plunge i...On April 2,the United States announced the implementation of the so-called“reciprocal tariffs”plan.Combined with factors such as the OPEC+plan to increase production starting in May,this led to a continuous plunge in the benchmark oil prices of WTI and Brent over the subsequent three trading days.Despite the significant impact of the United States’“reciprocal tariffs”plan on the global political and economic landscape,the fundamental dynamics of supply and demand remain the decisive factors in the fluctuations of international oil prices.The current trend of international oil price fluctuations is still primarily driven by the supply side,with both supply and demand factors playing a role.Investment,costs,and resource constraints on the supply side do not allow for a significant increase in crude oil production,while“consumption rigidity”on the demand side does not permit a significant decrease in crude oil demand.As a result,International oil prices are expected to fluctuate in the short term,but a significant decline is unlikely to be sustained in the near to medium term.In this context,Chinese oil companies should focus on four key areas to ensure the security of national oil and gas supplies:first,promoting high-quality increases in domestic oil and gas reserves and production;second,steadily strengthening the acquisition of overseas oil and gas resources;third,continuously driving innovation in oil and gas exploration and development technologies;fourth,enhancing the capacity for domestic oil and gas reserves in an orderly manner.展开更多
This review takes stock of China’s Double Reduction.In the short run,it lowered visible burden and pushed demand from subject tutoring toward on-campus and non-subject services.But with high-stakes selection unchange...This review takes stock of China’s Double Reduction.In the short run,it lowered visible burden and pushed demand from subject tutoring toward on-campus and non-subject services.But with high-stakes selection unchanged,demand reappears as small-group/one-to-one provision,advantaging families with high socioeconomic status and strong schools.Lasting relief will require tighter oversight and admissions reform with targeted,well-funded in-school support.展开更多
BACKGROUND Foreign body(FB)ingestion is one of the most challenging clinical situations faced by endoscopists.Most esophageal FB impaction emergencies occur in children.It is important to study the epidemiological pro...BACKGROUND Foreign body(FB)ingestion is one of the most challenging clinical situations faced by endoscopists.Most esophageal FB impaction emergencies occur in children.It is important to study the epidemiological profile and endoscopic methods for treating FB impacted in the esophagus of children,as it can help in the development of more effective,safe and personalized preventive and therapeutic strategies.AIM To define the profile of children seeking emergency care due to FB impaction in the esophagus,analyze factors associated with complications,and evaluate the effectiveness of rigid(RE)and flexible endoscopes(FE).METHODS A retrospective cohort study of 166 children with impacted FB in the esophagus who underwent an endoscopy(FE=84 vs RE=82)at the Dr.JoséFrota Institute was performed.The primary outcomes were to assess the efficacy of the endoscopic technique and factors associated with complications.The secondary outcomes were age group,gender,symptoms,length of hospital stay,and location of the FB.RESULTS Boys(66.9%),preschoolers(43.4%),FB>24 hours(62.7%),cervical esophagus(60.8%),coin ingestion(57.2%)and complaints of dysphagia(24.9%)and sialorrhea(23.1%)were the predominant findings.Endoscopy was successful(90.4%)with sedation(89.1%).A total of 97%of patients were discharged from the hospital,while 3%died.The average hospital stay length was 2.6 days.Most patients did not experience complications predominated(64.5%).Esophageal perforations were more frequent after RE(11%vs 4.8%),while FE was more effective(95.2%vs 85.4%).Theχ2 test or Fisher's exact test was used to compare categorical variables.For continuous variables,the Kruskal-Wallis test or analysis of variance was used.Statistical analyses were performed in R®software(version 1.3.1093).CONCLUSION Coins were the most frequent FBs and were mainly lodged in the upper esophagus of preschool boys.Risk factors for complications due to esophageal FB include battery ingestion,delayed removal(>48 hours)and lodging in the thoracic esophagus.FE was generally more effective than RE for removing FBs;both procedures are safe.展开更多
Interventional pulmonology(IP)represents a rapidly growing and developing subspecialty within pulmonary medicine.To the intensivist,given the elaborate undertakings with respect to airway,lung and pleural disease mana...Interventional pulmonology(IP)represents a rapidly growing and developing subspecialty within pulmonary medicine.To the intensivist,given the elaborate undertakings with respect to airway,lung and pleural disease management-IP has shown an increasing presence and remain a major ally in the care of these pa-tients.Thus,an understanding of the different roles that IP could offer to the intensivist is of prime importance in the multi-disciplinary care of the complex patients within the intensive care units,particularly in relation to lung,airway and pleural diseases.This review article will explore the different intersections of IP in critical care and discuss the applications of this discipline within the highly complex critical care environment.展开更多
Inflatable deployable structures inspired by origami have significant applications in space missions such as solar arrays and antennas.In this paper,a generalized Miura-ori tubular cell(GMTC)is presented as the basic ...Inflatable deployable structures inspired by origami have significant applications in space missions such as solar arrays and antennas.In this paper,a generalized Miura-ori tubular cell(GMTC)is presented as the basic cell to design a family of inflatable origami tubular structures with the targeted configuration.First,the classification of rigid foldable degree-4 vertices is studied thoroughly.Since the proposed GMTC is comprised of forming units(FU)and linking units(LU),types of FUs and LUs are investigated based on the classification of degree-4 vertices,respectively.The rigid foldability of the GMTC is presented by studying the kinematics of the FUs and LUs.Volume of the GMTC is analyzed to investigate multistable configurations of the basic cell.The variations in volume of the GMTC offer great potential for developing the inflatable tubular structure.Design method and parametric optimization of the tubular structure with targeted configuration are proposed.The feasibility of the approach is validated by the approximation of four different cases,namely parabolic,semicircular,trapezoidal,and straight-arc hybrid tubular structures.展开更多
The presentation of a foreign body in the lower urinary tract is a challenging urological emergency with highly variable management approaches.A retrospective cohort study was undertaken to identify the patients who p...The presentation of a foreign body in the lower urinary tract is a challenging urological emergency with highly variable management approaches.A retrospective cohort study was undertaken to identify the patients who presented with selfinserted genitourethral foreign body to adult tertiary centers within our local health network(Southern Adelaide Local Health Network,Adelaide,Australia)from October 2002 to October 2022.Patient demographics,type of foreign body,psychiatric comorbidities,retrieval techniques,complications,and readmission data were extracted.Twenty-seven cases were identified with a median age of 44 years.Twenty-three(85.2%)were male and 4(14.8%)were female.Ten patients(37.0%)had a concurrent psychiatric illness.The most commonly inserted foreign bodies were plastic tubes/wires(29.6%).Twenty cases(74.1%)were retrieved endoscopically.Three patients(11.1%)required open cystotomy and one underwent a transperineal urethrotomy.Four patients(14.8%)represented after discharge.Two patients had repeat presentations for genitourinary foreign body insertion.A significant monotonic positive trend of foreign body presentations was identified(Mann–Kendall tau=0.95,P=0.043).Presentations of genitourethral foreign body insertions have trended upward over the past two decades.However,most cases were successfully managed endoscopically.展开更多
Developing novel building blocks with predictable side-chain orientations and minimal intramolecular interactions is essential for peptide-based self-assembling materials.Traditional structures likeα-helices andβ-sh...Developing novel building blocks with predictable side-chain orientations and minimal intramolecular interactions is essential for peptide-based self-assembling materials.Traditional structures likeα-helices andβ-sheets rely on such interactions for stability,limiting control over exposed interacting moieties.Here,we reported a novel,frame-like peptide scaffold that maintains exceptional stability without intramolecular interactions.This structure exposes its backbone and orients side chains for hierarchical self-assembly into micron-scale cubes.By introducing mutations at specific sites,we controlled packing orientations,offering new options for tunable self-assembly.Our scaffold provides a versatile platform for designing advanced peptide materials,with applications in nanotechnology and biomaterials.展开更多
This work reviews models and methods for determining the dynamic response of pavements to moving vehicle loads in the framework of continuum-based three dimensional models and linear theories.This review emphasizes th...This work reviews models and methods for determining the dynamic response of pavements to moving vehicle loads in the framework of continuum-based three dimensional models and linear theories.This review emphasizes the most representative models and methods of analysis in the existing literature and illustrates all of them by numerical examples.Thus,13 such examples are presented here in some detail.Both flexible and rigid(concrete)pavement models involving simple and elaborate cases with respect to geometry and material behavior are considered.Thus,homogeneous or layered half-spaces with isotropic or cross-anisotropic and elastic,viscoelastic or poroelastic properties are considered.The vehicles are modeled as simple point or distributed loads or discrete spring-mass-dashpot system moving with constant or variable velocity.The dynamic response of the above pavement-vehicle systems is obtained by analytical/numerical or purely numerical methods of solution.Analytical/numerical methods have mainly to do with Fourier transforms or complex Fourier series with respect to both space and time.Purely numerical methods involve the finite element method(FEM)and the boundary element method(BEM)working in time or frequency domain.Critical discussions on the advantages and disadvantages of the various pavement-vehicle models and their methods of analysis are provided and the effects of the main parameters on the pavement response are determined through parametric studies and presented in the examples.Finally,conclusions are provided and suggestions for future research are made.展开更多
Objective: To analyze the therapeutic effect of combining dental arch splint intermaxillary traction with rigid internal fixation for the treatment of facial comminuted fractures. Methods: Sixty patients with facial c...Objective: To analyze the therapeutic effect of combining dental arch splint intermaxillary traction with rigid internal fixation for the treatment of facial comminuted fractures. Methods: Sixty patients with facial comminuted fractures admitted for treatment between July 2023 and December 2024 were selected. Using a random number table method, 30 patients were assigned to the observation group, where moderate traction using a dental arch splint combined with rigid internal fixation was applied. Another 30 patients were assigned to the control group and only received dental arch splint traction treatment. The total effective rate, postoperative recovery indicators, periodontal status, complication rate, and quality of life scores were compared between the two groups. Results: The total effective rate in the observation group was higher than that in the control group. The postoperative recovery indicators and periodontal status in the observation group were superior to those in the control group. The complication rate and quality of life score were lower in the observation group compared to the control group, with P < 0.05. Conclusion: Combining dental arch splint intermaxillary traction with rigid internal fixation can improve the periodontal status and quality of life of patients with facial comminuted fractures, shorten postoperative recovery time, reduce various complications, and enhance surgical efficacy.展开更多
The motion of an elliptical rigid particle in a lid-driven cavity flow was numerically simulated using the immersed boundary lattice Boltzmann method(IB-LBM).The effects of the particle's initial orientation angle...The motion of an elliptical rigid particle in a lid-driven cavity flow was numerically simulated using the immersed boundary lattice Boltzmann method(IB-LBM).The effects of the particle's initial orientation angle,initial position,aspect ratio,and size on the motion characteristics were investigated.The computational results indicate that the particle's motion undergoes two distinct stages:a starting stage that involves moving from the release position to a limit cycle,and a periodic stage that involves moving on the limit cycle.The initial orientation of the particle has a minimal impact on both stages of motion.In contrast,the time it takes for the particle to reach the limit cycle may vary depending on the release position.Furthermore,particles with a larger aspect ratio exhibit a greater maximum velocity magnitude;an increase in particle size causes the particle trajectory to contract more toward the center of the cavity,decreasing the centrifugal force experienced by the particle.展开更多
This paper proposes a new approach to eliminate aerodynamic lift oscillation,called the Dominant Sector Individual Blade Control(DS-IBC)method for rigid rotor helicopters.An Advancing Blade Concept(ABC)rotor model for...This paper proposes a new approach to eliminate aerodynamic lift oscillation,called the Dominant Sector Individual Blade Control(DS-IBC)method for rigid rotor helicopters.An Advancing Blade Concept(ABC)rotor model for aerodynamic analysis based on the free-wake method is applied.DS-IBC avoids applying active control on the rotor's retreating side by employing and restricting active control inputs to a sector area of the rotor disc.Outside this sector,only primary collective and cyclic pitch control are used.Each blade takes turns entering the sector,creating a“relay”active control form to ensure continuous control inputs.The method also includes outer-trim and inner-trim iteration modules.Results show that DS-IBC can eliminate aerodynamic lift oscillation using much smaller control inputs than the sine-trim method.By focusing active control on the rotor's advancing side,DS-IBC improves the effective lift-to-drag ratio and reduces the implementation difficulty of active rotor control for aerodynamic oscillation elimination,especially at a large lift-offset.展开更多
Safety berms(also called safety bunds or windrows),widely employed in surface mining and quarry operations,are typically designed based on rules of thumb.Despite having been used by the industry for more than half a c...Safety berms(also called safety bunds or windrows),widely employed in surface mining and quarry operations,are typically designed based on rules of thumb.Despite having been used by the industry for more than half a century and accidents happening regularly,their behaviour is still poorly understood.This paper challenges existing practices through a comprehensive investigation combining full-scale experiments and advanced numerical modelling.Focusing on a Volvo A45G articulated dump truck(ADT)and a CAT 773B rigid dump truck(RDT),collision scenarios under various approach conditions and different safety berm geometries and materials are rigorously examined.The calibrated numerical model is used to assess the energy absorption capacity of safety berms with different geometry and to predict a critical velocity for a specific scenario.Back analysis of an actual fatal accident indicated that an ADT adhering to the speed limit could not be stopped by the safety berm designed under current guidelines.The study highlights the importance of considering the entire geometry and the mass and volume of the material used to build the safety berm alongside the speed and approach conditions of the machinery.The findings of the study enable operators to set speed limits based on specific berm geometries or adapt safety berm designs to match speed constraints for specific machinery.This will reduce the risk of fatal accidents and improve haul road safety.展开更多
The membrane,one of the key components of flow batteries,ideally has high selectivity,conductivity,and stability.However,porous membranes prepared by conventional non-solvent-induced phase separation(NIPS)commonly suf...The membrane,one of the key components of flow batteries,ideally has high selectivity,conductivity,and stability.However,porous membranes prepared by conventional non-solvent-induced phase separation(NIPS)commonly suffer from low selectivity and poor mechanical stability.Here,we used rigid naphthalene-containing polybenzimidazole(NPBI)to prepare a porous membrane with unique egg-shaped pores by adjusting solvent/non-solvent exchange in NIPS.The dense pores with a size of 3.6Åarranged dispersedly between egg-shaped pores.The rigid NPBI and 3.6-Åsmall pores enabled the membrane high mechanical strength.The thickness was thus decreased to 1.4μm,which exhibited an ultrahigh tensile strength of 463.54 MPa.The dense pores were also smaller than hydrated vanadium ions,achieving a low permeability of 2.28×10^(-7)cm^(2)/h,indicating high selectivity.This is the first time to prepare such a highly selective and mechanically stable ultrathin porous membrane by NIPS.Importantly,the ion-transport pathways in the 1.4μm membrane were shortened,decreasing the area resistance to as low as 0.015Ωcm 2.Demonstrated in a vanadium flow battery,its coulombic efficiency was 98.57%and energy efficiency reached 81.72%at 200 mA/cm 2.This study proposes an effective strategy to prepare highperformance ultrathin porous membranes for flow batteries.展开更多
基金financially supported by the National Natural Science Foundation of China(62464010)Spring City Plan-Special Program for Young Talents(K202005007)+3 种基金Yunnan Talents Support Plan for Yong Talents(XDYC-QNRC-2022-0482)Yunnan Local Colleges Applied Basic Research Projects(202101BA070001-138)Key Laboratory of Artificial Microstructures in Yunnan Higher EducationFrontier Research Team of Kunming University 2023。
文摘Zinc-ion batteries(ZIBs)are inexpensive and safe,but side reactions on the Zn anode and Zn dendrite growth hinder their practical applications.In this study,1,3,5-triformylphloroglycerol(Tp)and various diamine monomers(p-phenylenediamine(Pa),benzidine(BD),and 4,4"-diamino-p-terphenyl(DATP))were used to synthesize a series of two-dimensional covalent-organic frameworks(COFs).The resulting COFs were named TpPa,TpBD,and TpDATP,respectively,and they showed uniform zincophilic sites,different pore sizes,and high Young's moduli on the Zn anode.Among them,TpPa and TpBD showed lower surface work functions and higher ion transfer numbers,which were conducive to uniform galvanizing/stripping zinc and inhibited dendrite growth.Theoretical calculations showed that TpPa and TpBD had wider negative potential region and greater adsorption capacity for Zn2+than TpDATP,providing more electron donor sites to coordinate with Zn^(2+).Symmetric cells protected by TpPa and TpBD stably cycled for more than 2300 h,whereas TpDATP@Zn and the bare zinc symmetric cells failed after around 150 and200 h.The full cells containing TpPa and TpBD modification layers also showed excellent cycling capacity at 1 A/g.This study provides comprehensive insights into the construction of highly reversible Zn anodes via COF modification layers for advanced rechargeable ZIBs.
文摘Five cadmium naphthalene-diphosphonates,formulated as[Cd_(1.5)(1,4-ndpaH_(2))2(4,4'-bpyH)(4,4'-bpy)0.5(H_(2)O)_(2)]2(1),[Cd(1,4-ndpaH_(2))(1,4-bib)0.5(H_(2)O)](2),[Cd(1,4-ndpaH3)2(1,2-dpe)(H_(2)O)]·(1,2-dpe)·7H_(2)O(3),(1,2-bixH)[Cd3(1,4-ndpaH)(1,4-ndpaH_(2))2(H_(2)O)_(2)](4),and[Cd(1,4-ndpaH_(2))(H_(2)O)]·H_(2)O(5),have been synthesized from the selfassembly reactions of 1,4-naphthalenediphosphonic acid(1,4-ndpaH4)with Cd(NO3)2·4H_(2)O by introducing auxiliary ligands with variation of rigidity,such as 4,4'-bipyridine(4,4'-bpy),1,4-bis(1-imidazolyl)benzene(1,4-bib),1,2-di(4-pyridyl)ethylene(1,2-dpe),1,3-di(4-pyridyl)propane(1,3-dpp),and bis(imidazol-1-ylmethyl)benzene(1,2-bix),respectively.Structure resolution by single-crystal X-ray diffraction reveals that compound 1 possesses a layered framework,in which the{Cd3(PO2)2}trimers made up of corner-sharing two{CdO4N2}and one{CdO6}octahedra are connected by phosphonate groups,forming a ribbon,which are cross-linked by 4,4'-bipy ligands,forming a 2D layer.Compound 2 shows a 3D open-framework structure,where chains of corner-sharing{CdO4N}trigonal bipyramids and{PO3C}tetrahedra are cross-linked by 1,4-bib and/or phosphonate groups.A 1D ladder-like chain structure is found in compound 3,where the ladder-like chains made up of corner-sharing{CdO5N}octahedra and{PO3C}tetra hedra are connected by 1,4-ndpaH_(2)^(2-).Both compounds 4 and 5 obtained by the introduction of flexible ligands during the synthesis show a 2D layered structure,which is formed by ligand crosslinking double metal chains.Interestingly,In 4,flexible 1,2-bix was singly protonated,as vip molecules,filled between layer and layer,while flexible ligand 1,3-dpp is absent in 5.Photophysical measurements indicate that compounds 1-5 show ligand-centered emissions.
文摘From[J.Differential Geom.,1990,31(1):285-299],one can obtain that compact self-shrinking hypersufaces in R^(n+1) with constant scalar curvature must be the standard sphere S^(n)(√n)(cf.[Front.Math.,2023,18(2):417-430]).This result was generalized by Guo[J.Math.Soc.Japan,2018,70(3):1103-1110]with assumption of a lower or upper scalar curvature bound.In this paper,we will generalize the scalar curvature rigidity theorem of Guo to the case of λ-hypersurfaces.We will also give an alternative proof of the theorem(cf.[2014,arXiv:1410.5302]and[Proc.Amer.Math.Soc.,2018,146(10):4459-4471])that λ-hypersurfaces which are entire graphs must be hyperplanes.
基金supported by the National Key Research and Development Program of China(No.2021YFA1600304)Joint Fund for Regional Innovation and Development(No.U20A2073)+4 种基金National Natural Science Foundation of China(Nos.22373048,21973038,61904119 and 22105089)Jiangxi Provincial Key Laboratory of Functional Molecular Materials Chemistry(No.20212BCD42018)US National Science Foundation(NSF,No.CHE-2055499)the Interdisciplinary program of Wuhan National High Magnetic Field Center(No.WHMFC202133)the support of the NSF Research Traineeship Program(No.DGE-2152168)。
文摘Two CoⅡ-based complexes,{[Co(dps)_(2)(N_(3))_(2)]·H_(2)O}_n(1)and[Co(dps)_(2)(N_(3))_(2)]_n(2),show a 1D chain and a 3D network,respectively.The central CoⅡions in the complexes have the same coordination environment with the[Co(dps)_(4)(N_(3))_(2)]unit.Although the differences in crystal parameters are nearly negligible,their magnetic properties are very different.AC susceptibility data show that 1 behaves as a typical field-induced single-ion magnet(SIM)with the out-of-phase(χ_(M)”)signals,while 2 shows ac signals ofχ_(M)”without peaks even under applied dc filed within our measurement window.Far-IR magneto-spectra(FIRMS)show strong spin-phonon couplings at 0 T in 2,likely making the magnetic relaxation in 2 fast,while the couplings are negligible in 1.Small spin-phonon coupling in 1 likely leads to slower magnetic relaxation,making 1 a SIM.The difference in the properties is due to the structural rigidity of 2 in its 3D network,leading to stronger spin-phonon coupling.Combined high-field EPR(HF-EPR)and FIRMS studies give spin-Hamiltonian parameters,including D=64.0(9)cm^(-1),|E|=15.7(2)cm^(-1)for 1 and D=80.0(2)cm^(-1),|E|=19.0(1)cm^(-1)for 2.
基金supported by the National Natural Science Foundation of China(12071161,11971165)supported by the National Natural Science Foundation of China(11971042)the Natural Science Foundation of Zhejiang Province(Z24A010005)。
文摘By introducing the Carathéodory metric,we establish the Schwarz lemma at the boundary for holomorphic self-mappings on the unit p-ball B_(p)^(n) of C^(n).Furthermore,the boundary rigidity theorem for holomorphic self-mappings defined on B_(n)^(p) is obtained.These results cover the boundary Schwarz lemma and rigidity result for holomorphic self-mappings on the unit ball for p=2,and the unit polydisk for p=∞,respectively.
基金National Natural Science Foundation of China(No.51705545)。
文摘The active sound absorption technique excels in mitigating low-frequency sound waves,yet it falls short when dealing with medium and high-frequency sound waves.To enhance the sound-absorbing effect of medium and high-frequency sound waves,a novel semi-active sound absorption method has been introduced.This method modulates the surface impedance of a loudspeaker positioned behind the sound-absorbing material,thereby altering the sound absorption coefficient.The theoretical sound absorption coefficient is calculated using MATLAB and compared with the experimental one.Results show that the method can effectively modulates the absorption coefficient in response to varying incident sound wave frequencies,ensuring that it remains at its peak value.
基金National Natural Science Foundation of China(52375378)National Key Laboratory of Metal Forming Technology and Heavy Equipment(S2308100.W12)Huxiang High-Level Talent Gathering Project of Hunan Province(2021RC5001)。
文摘The titanium alloy strut serves as a key load-bearing component of aircraft landing gear,typically manufactured via forging.The friction condition has important influence on material flow and cavity filling during the forging process.Using the previously optimized shape and initial position of preform,the influence of the friction condition(friction factor m=0.1–0.3)on material flow and cavity filling was studied by numerical method with a shear friction model.A novel filling index was defined to reflect material flow into left and right flashes and zoom in on friction-induced results.The results indicate that the workpiece moves rigidly to the right direction,with the displacement decreasing as m increases.When m<0.18,the underfilling defect will occur in the left side of strut forging,while overflow occurs in the right forging die cavity.By combining the filling index and analyses of material flow and filling status,a reasonable friction factor interval of m=0.21–0.24 can be determined.Within this interval,the cavity filling behavior demonstrates robustness,with friction fluctuations exerting minimal influence.
文摘On April 2,the United States announced the implementation of the so-called“reciprocal tariffs”plan.Combined with factors such as the OPEC+plan to increase production starting in May,this led to a continuous plunge in the benchmark oil prices of WTI and Brent over the subsequent three trading days.Despite the significant impact of the United States’“reciprocal tariffs”plan on the global political and economic landscape,the fundamental dynamics of supply and demand remain the decisive factors in the fluctuations of international oil prices.The current trend of international oil price fluctuations is still primarily driven by the supply side,with both supply and demand factors playing a role.Investment,costs,and resource constraints on the supply side do not allow for a significant increase in crude oil production,while“consumption rigidity”on the demand side does not permit a significant decrease in crude oil demand.As a result,International oil prices are expected to fluctuate in the short term,but a significant decline is unlikely to be sustained in the near to medium term.In this context,Chinese oil companies should focus on four key areas to ensure the security of national oil and gas supplies:first,promoting high-quality increases in domestic oil and gas reserves and production;second,steadily strengthening the acquisition of overseas oil and gas resources;third,continuously driving innovation in oil and gas exploration and development technologies;fourth,enhancing the capacity for domestic oil and gas reserves in an orderly manner.
文摘This review takes stock of China’s Double Reduction.In the short run,it lowered visible burden and pushed demand from subject tutoring toward on-campus and non-subject services.But with high-stakes selection unchanged,demand reappears as small-group/one-to-one provision,advantaging families with high socioeconomic status and strong schools.Lasting relief will require tighter oversight and admissions reform with targeted,well-funded in-school support.
基金the Institutional Research Ethics Board(number 6.886.384)Brazil platform system(Approval with CAAE number 79007324.1.0000.5047).
文摘BACKGROUND Foreign body(FB)ingestion is one of the most challenging clinical situations faced by endoscopists.Most esophageal FB impaction emergencies occur in children.It is important to study the epidemiological profile and endoscopic methods for treating FB impacted in the esophagus of children,as it can help in the development of more effective,safe and personalized preventive and therapeutic strategies.AIM To define the profile of children seeking emergency care due to FB impaction in the esophagus,analyze factors associated with complications,and evaluate the effectiveness of rigid(RE)and flexible endoscopes(FE).METHODS A retrospective cohort study of 166 children with impacted FB in the esophagus who underwent an endoscopy(FE=84 vs RE=82)at the Dr.JoséFrota Institute was performed.The primary outcomes were to assess the efficacy of the endoscopic technique and factors associated with complications.The secondary outcomes were age group,gender,symptoms,length of hospital stay,and location of the FB.RESULTS Boys(66.9%),preschoolers(43.4%),FB>24 hours(62.7%),cervical esophagus(60.8%),coin ingestion(57.2%)and complaints of dysphagia(24.9%)and sialorrhea(23.1%)were the predominant findings.Endoscopy was successful(90.4%)with sedation(89.1%).A total of 97%of patients were discharged from the hospital,while 3%died.The average hospital stay length was 2.6 days.Most patients did not experience complications predominated(64.5%).Esophageal perforations were more frequent after RE(11%vs 4.8%),while FE was more effective(95.2%vs 85.4%).Theχ2 test or Fisher's exact test was used to compare categorical variables.For continuous variables,the Kruskal-Wallis test or analysis of variance was used.Statistical analyses were performed in R®software(version 1.3.1093).CONCLUSION Coins were the most frequent FBs and were mainly lodged in the upper esophagus of preschool boys.Risk factors for complications due to esophageal FB include battery ingestion,delayed removal(>48 hours)and lodging in the thoracic esophagus.FE was generally more effective than RE for removing FBs;both procedures are safe.
文摘Interventional pulmonology(IP)represents a rapidly growing and developing subspecialty within pulmonary medicine.To the intensivist,given the elaborate undertakings with respect to airway,lung and pleural disease management-IP has shown an increasing presence and remain a major ally in the care of these pa-tients.Thus,an understanding of the different roles that IP could offer to the intensivist is of prime importance in the multi-disciplinary care of the complex patients within the intensive care units,particularly in relation to lung,airway and pleural diseases.This review article will explore the different intersections of IP in critical care and discuss the applications of this discipline within the highly complex critical care environment.
基金supported by the National Natural Science Foundation of China(No.52222501,52075016,52192632)the Fundamental Research Funds for the Central Universities(Grant No.YWF-23-L-904).
文摘Inflatable deployable structures inspired by origami have significant applications in space missions such as solar arrays and antennas.In this paper,a generalized Miura-ori tubular cell(GMTC)is presented as the basic cell to design a family of inflatable origami tubular structures with the targeted configuration.First,the classification of rigid foldable degree-4 vertices is studied thoroughly.Since the proposed GMTC is comprised of forming units(FU)and linking units(LU),types of FUs and LUs are investigated based on the classification of degree-4 vertices,respectively.The rigid foldability of the GMTC is presented by studying the kinematics of the FUs and LUs.Volume of the GMTC is analyzed to investigate multistable configurations of the basic cell.The variations in volume of the GMTC offer great potential for developing the inflatable tubular structure.Design method and parametric optimization of the tubular structure with targeted configuration are proposed.The feasibility of the approach is validated by the approximation of four different cases,namely parabolic,semicircular,trapezoidal,and straight-arc hybrid tubular structures.
文摘The presentation of a foreign body in the lower urinary tract is a challenging urological emergency with highly variable management approaches.A retrospective cohort study was undertaken to identify the patients who presented with selfinserted genitourethral foreign body to adult tertiary centers within our local health network(Southern Adelaide Local Health Network,Adelaide,Australia)from October 2002 to October 2022.Patient demographics,type of foreign body,psychiatric comorbidities,retrieval techniques,complications,and readmission data were extracted.Twenty-seven cases were identified with a median age of 44 years.Twenty-three(85.2%)were male and 4(14.8%)were female.Ten patients(37.0%)had a concurrent psychiatric illness.The most commonly inserted foreign bodies were plastic tubes/wires(29.6%).Twenty cases(74.1%)were retrieved endoscopically.Three patients(11.1%)required open cystotomy and one underwent a transperineal urethrotomy.Four patients(14.8%)represented after discharge.Two patients had repeat presentations for genitourinary foreign body insertion.A significant monotonic positive trend of foreign body presentations was identified(Mann–Kendall tau=0.95,P=0.043).Presentations of genitourethral foreign body insertions have trended upward over the past two decades.However,most cases were successfully managed endoscopically.
基金supported by the National Basic Research Program of China 973 Program(Nos.2021YFA0910803,2021YFC2103900)the National Natural Science Foundation of China(No.21977011)+4 种基金the Natural Science Foundation of Guangdong Province(Nos.2022A1515010996 and 2020A1515011544)the Shenzhen Science and Technology Innovation Committee(Nos.RCJC20200714114433053,JCYJ20180507181527112 and JCYJ20200109140406047)the Shenzhen-Hong Kong Institute of Brain Science-Shenzhen Fundamental Research Institutions(No.2019SHIBS0004)the Shenzhen Fundamental Research Program(No.GXWD20201231165807007–20200827170132001)Tian Fu Jin Cheng Laboratory(Advanced Medical Center)Group Racing Project(No.TFJC2023010008)。
文摘Developing novel building blocks with predictable side-chain orientations and minimal intramolecular interactions is essential for peptide-based self-assembling materials.Traditional structures likeα-helices andβ-sheets rely on such interactions for stability,limiting control over exposed interacting moieties.Here,we reported a novel,frame-like peptide scaffold that maintains exceptional stability without intramolecular interactions.This structure exposes its backbone and orients side chains for hierarchical self-assembly into micron-scale cubes.By introducing mutations at specific sites,we controlled packing orientations,offering new options for tunable self-assembly.Our scaffold provides a versatile platform for designing advanced peptide materials,with applications in nanotechnology and biomaterials.
文摘This work reviews models and methods for determining the dynamic response of pavements to moving vehicle loads in the framework of continuum-based three dimensional models and linear theories.This review emphasizes the most representative models and methods of analysis in the existing literature and illustrates all of them by numerical examples.Thus,13 such examples are presented here in some detail.Both flexible and rigid(concrete)pavement models involving simple and elaborate cases with respect to geometry and material behavior are considered.Thus,homogeneous or layered half-spaces with isotropic or cross-anisotropic and elastic,viscoelastic or poroelastic properties are considered.The vehicles are modeled as simple point or distributed loads or discrete spring-mass-dashpot system moving with constant or variable velocity.The dynamic response of the above pavement-vehicle systems is obtained by analytical/numerical or purely numerical methods of solution.Analytical/numerical methods have mainly to do with Fourier transforms or complex Fourier series with respect to both space and time.Purely numerical methods involve the finite element method(FEM)and the boundary element method(BEM)working in time or frequency domain.Critical discussions on the advantages and disadvantages of the various pavement-vehicle models and their methods of analysis are provided and the effects of the main parameters on the pavement response are determined through parametric studies and presented in the examples.Finally,conclusions are provided and suggestions for future research are made.
基金Special Support Program for Scientific and Technological Talent“Application and Impact of Dental Arch Splint Intermaxillary Traction Combined with Rigid Internal Fixation on Oral Health in Patients with Facial Fractures”(DX2023BR18)。
文摘Objective: To analyze the therapeutic effect of combining dental arch splint intermaxillary traction with rigid internal fixation for the treatment of facial comminuted fractures. Methods: Sixty patients with facial comminuted fractures admitted for treatment between July 2023 and December 2024 were selected. Using a random number table method, 30 patients were assigned to the observation group, where moderate traction using a dental arch splint combined with rigid internal fixation was applied. Another 30 patients were assigned to the control group and only received dental arch splint traction treatment. The total effective rate, postoperative recovery indicators, periodontal status, complication rate, and quality of life scores were compared between the two groups. Results: The total effective rate in the observation group was higher than that in the control group. The postoperative recovery indicators and periodontal status in the observation group were superior to those in the control group. The complication rate and quality of life score were lower in the observation group compared to the control group, with P < 0.05. Conclusion: Combining dental arch splint intermaxillary traction with rigid internal fixation can improve the periodontal status and quality of life of patients with facial comminuted fractures, shorten postoperative recovery time, reduce various complications, and enhance surgical efficacy.
文摘The motion of an elliptical rigid particle in a lid-driven cavity flow was numerically simulated using the immersed boundary lattice Boltzmann method(IB-LBM).The effects of the particle's initial orientation angle,initial position,aspect ratio,and size on the motion characteristics were investigated.The computational results indicate that the particle's motion undergoes two distinct stages:a starting stage that involves moving from the release position to a limit cycle,and a periodic stage that involves moving on the limit cycle.The initial orientation of the particle has a minimal impact on both stages of motion.In contrast,the time it takes for the particle to reach the limit cycle may vary depending on the release position.Furthermore,particles with a larger aspect ratio exhibit a greater maximum velocity magnitude;an increase in particle size causes the particle trajectory to contract more toward the center of the cavity,decreasing the centrifugal force experienced by the particle.
基金supported by the National Natural Science Foundation of China(No.12372229)the Aeronautical Science Foundation of China(No.2020Z006063001)+1 种基金the Science and Technology on Rotorcraft Aeromechanics Laboratory Foundation,China(No.61422202110)the Fundamental Research Funds for the Central Universities of China(No.DUT22LK12)。
文摘This paper proposes a new approach to eliminate aerodynamic lift oscillation,called the Dominant Sector Individual Blade Control(DS-IBC)method for rigid rotor helicopters.An Advancing Blade Concept(ABC)rotor model for aerodynamic analysis based on the free-wake method is applied.DS-IBC avoids applying active control on the rotor's retreating side by employing and restricting active control inputs to a sector area of the rotor disc.Outside this sector,only primary collective and cyclic pitch control are used.Each blade takes turns entering the sector,creating a“relay”active control form to ensure continuous control inputs.The method also includes outer-trim and inner-trim iteration modules.Results show that DS-IBC can eliminate aerodynamic lift oscillation using much smaller control inputs than the sine-trim method.By focusing active control on the rotor's advancing side,DS-IBC improves the effective lift-to-drag ratio and reduces the implementation difficulty of active rotor control for aerodynamic oscillation elimination,especially at a large lift-offset.
基金initiated and financially supported by Stevenson Aggregates and Fulton Hogan.
文摘Safety berms(also called safety bunds or windrows),widely employed in surface mining and quarry operations,are typically designed based on rules of thumb.Despite having been used by the industry for more than half a century and accidents happening regularly,their behaviour is still poorly understood.This paper challenges existing practices through a comprehensive investigation combining full-scale experiments and advanced numerical modelling.Focusing on a Volvo A45G articulated dump truck(ADT)and a CAT 773B rigid dump truck(RDT),collision scenarios under various approach conditions and different safety berm geometries and materials are rigorously examined.The calibrated numerical model is used to assess the energy absorption capacity of safety berms with different geometry and to predict a critical velocity for a specific scenario.Back analysis of an actual fatal accident indicated that an ADT adhering to the speed limit could not be stopped by the safety berm designed under current guidelines.The study highlights the importance of considering the entire geometry and the mass and volume of the material used to build the safety berm alongside the speed and approach conditions of the machinery.The findings of the study enable operators to set speed limits based on specific berm geometries or adapt safety berm designs to match speed constraints for specific machinery.This will reduce the risk of fatal accidents and improve haul road safety.
基金supported by the National Key R&D Program of China(No.2022YFB3805302)the National Natural Science Foundation of China(No.22379141)+2 种基金CAS Strategic Leading Science&Technology Program(A)(No.XDA0400201)Dalian Science and Technology Star Program(No.2022RQ014)Youth Innovation Promotion Association CAS(No.2022184).
文摘The membrane,one of the key components of flow batteries,ideally has high selectivity,conductivity,and stability.However,porous membranes prepared by conventional non-solvent-induced phase separation(NIPS)commonly suffer from low selectivity and poor mechanical stability.Here,we used rigid naphthalene-containing polybenzimidazole(NPBI)to prepare a porous membrane with unique egg-shaped pores by adjusting solvent/non-solvent exchange in NIPS.The dense pores with a size of 3.6Åarranged dispersedly between egg-shaped pores.The rigid NPBI and 3.6-Åsmall pores enabled the membrane high mechanical strength.The thickness was thus decreased to 1.4μm,which exhibited an ultrahigh tensile strength of 463.54 MPa.The dense pores were also smaller than hydrated vanadium ions,achieving a low permeability of 2.28×10^(-7)cm^(2)/h,indicating high selectivity.This is the first time to prepare such a highly selective and mechanically stable ultrathin porous membrane by NIPS.Importantly,the ion-transport pathways in the 1.4μm membrane were shortened,decreasing the area resistance to as low as 0.015Ωcm 2.Demonstrated in a vanadium flow battery,its coulombic efficiency was 98.57%and energy efficiency reached 81.72%at 200 mA/cm 2.This study proposes an effective strategy to prepare highperformance ultrathin porous membranes for flow batteries.
