Zinc-ion batteries(ZIBs)are inexpensive and safe,but side reactions on the Zn anode and Zn dendrite growth hinder their practical applications.In this study,1,3,5-triformylphloroglycerol(Tp)and various diamine monomer...Zinc-ion batteries(ZIBs)are inexpensive and safe,but side reactions on the Zn anode and Zn dendrite growth hinder their practical applications.In this study,1,3,5-triformylphloroglycerol(Tp)and various diamine monomers(p-phenylenediamine(Pa),benzidine(BD),and 4,4"-diamino-p-terphenyl(DATP))were used to synthesize a series of two-dimensional covalent-organic frameworks(COFs).The resulting COFs were named TpPa,TpBD,and TpDATP,respectively,and they showed uniform zincophilic sites,different pore sizes,and high Young's moduli on the Zn anode.Among them,TpPa and TpBD showed lower surface work functions and higher ion transfer numbers,which were conducive to uniform galvanizing/stripping zinc and inhibited dendrite growth.Theoretical calculations showed that TpPa and TpBD had wider negative potential region and greater adsorption capacity for Zn2+than TpDATP,providing more electron donor sites to coordinate with Zn^(2+).Symmetric cells protected by TpPa and TpBD stably cycled for more than 2300 h,whereas TpDATP@Zn and the bare zinc symmetric cells failed after around 150 and200 h.The full cells containing TpPa and TpBD modification layers also showed excellent cycling capacity at 1 A/g.This study provides comprehensive insights into the construction of highly reversible Zn anodes via COF modification layers for advanced rechargeable ZIBs.展开更多
Two CoⅡ-based complexes,{[Co(dps)_(2)(N_(3))_(2)]·H_(2)O}_n(1)and[Co(dps)_(2)(N_(3))_(2)]_n(2),show a 1D chain and a 3D network,respectively.The central CoⅡions in the complexes have the same coordination envir...Two CoⅡ-based complexes,{[Co(dps)_(2)(N_(3))_(2)]·H_(2)O}_n(1)and[Co(dps)_(2)(N_(3))_(2)]_n(2),show a 1D chain and a 3D network,respectively.The central CoⅡions in the complexes have the same coordination environment with the[Co(dps)_(4)(N_(3))_(2)]unit.Although the differences in crystal parameters are nearly negligible,their magnetic properties are very different.AC susceptibility data show that 1 behaves as a typical field-induced single-ion magnet(SIM)with the out-of-phase(χ_(M)”)signals,while 2 shows ac signals ofχ_(M)”without peaks even under applied dc filed within our measurement window.Far-IR magneto-spectra(FIRMS)show strong spin-phonon couplings at 0 T in 2,likely making the magnetic relaxation in 2 fast,while the couplings are negligible in 1.Small spin-phonon coupling in 1 likely leads to slower magnetic relaxation,making 1 a SIM.The difference in the properties is due to the structural rigidity of 2 in its 3D network,leading to stronger spin-phonon coupling.Combined high-field EPR(HF-EPR)and FIRMS studies give spin-Hamiltonian parameters,including D=64.0(9)cm^(-1),|E|=15.7(2)cm^(-1)for 1 and D=80.0(2)cm^(-1),|E|=19.0(1)cm^(-1)for 2.展开更多
From[J.Differential Geom.,1990,31(1):285-299],one can obtain that compact self-shrinking hypersufaces in R^(n+1) with constant scalar curvature must be the standard sphere S^(n)(√n)(cf.[Front.Math.,2023,18(2):417-430...From[J.Differential Geom.,1990,31(1):285-299],one can obtain that compact self-shrinking hypersufaces in R^(n+1) with constant scalar curvature must be the standard sphere S^(n)(√n)(cf.[Front.Math.,2023,18(2):417-430]).This result was generalized by Guo[J.Math.Soc.Japan,2018,70(3):1103-1110]with assumption of a lower or upper scalar curvature bound.In this paper,we will generalize the scalar curvature rigidity theorem of Guo to the case of λ-hypersurfaces.We will also give an alternative proof of the theorem(cf.[2014,arXiv:1410.5302]and[Proc.Amer.Math.Soc.,2018,146(10):4459-4471])that λ-hypersurfaces which are entire graphs must be hyperplanes.展开更多
Five cadmium naphthalene-diphosphonates,formulated as[Cd_(1.5)(1,4-ndpaH_(2))2(4,4'-bpyH)(4,4'-bpy)0.5(H_(2)O)_(2)]2(1),[Cd(1,4-ndpaH_(2))(1,4-bib)0.5(H_(2)O)](2),[Cd(1,4-ndpaH3)2(1,2-dpe)(H_(2)O)]·(1,2-d...Five cadmium naphthalene-diphosphonates,formulated as[Cd_(1.5)(1,4-ndpaH_(2))2(4,4'-bpyH)(4,4'-bpy)0.5(H_(2)O)_(2)]2(1),[Cd(1,4-ndpaH_(2))(1,4-bib)0.5(H_(2)O)](2),[Cd(1,4-ndpaH3)2(1,2-dpe)(H_(2)O)]·(1,2-dpe)·7H_(2)O(3),(1,2-bixH)[Cd3(1,4-ndpaH)(1,4-ndpaH_(2))2(H_(2)O)_(2)](4),and[Cd(1,4-ndpaH_(2))(H_(2)O)]·H_(2)O(5),have been synthesized from the selfassembly reactions of 1,4-naphthalenediphosphonic acid(1,4-ndpaH4)with Cd(NO3)2·4H_(2)O by introducing auxiliary ligands with variation of rigidity,such as 4,4'-bipyridine(4,4'-bpy),1,4-bis(1-imidazolyl)benzene(1,4-bib),1,2-di(4-pyridyl)ethylene(1,2-dpe),1,3-di(4-pyridyl)propane(1,3-dpp),and bis(imidazol-1-ylmethyl)benzene(1,2-bix),respectively.Structure resolution by single-crystal X-ray diffraction reveals that compound 1 possesses a layered framework,in which the{Cd3(PO2)2}trimers made up of corner-sharing two{CdO4N2}and one{CdO6}octahedra are connected by phosphonate groups,forming a ribbon,which are cross-linked by 4,4'-bipy ligands,forming a 2D layer.Compound 2 shows a 3D open-framework structure,where chains of corner-sharing{CdO4N}trigonal bipyramids and{PO3C}tetrahedra are cross-linked by 1,4-bib and/or phosphonate groups.A 1D ladder-like chain structure is found in compound 3,where the ladder-like chains made up of corner-sharing{CdO5N}octahedra and{PO3C}tetra hedra are connected by 1,4-ndpaH_(2)^(2-).Both compounds 4 and 5 obtained by the introduction of flexible ligands during the synthesis show a 2D layered structure,which is formed by ligand crosslinking double metal chains.Interestingly,In 4,flexible 1,2-bix was singly protonated,as vip molecules,filled between layer and layer,while flexible ligand 1,3-dpp is absent in 5.Photophysical measurements indicate that compounds 1-5 show ligand-centered emissions.展开更多
Hyperuricemia(HUA)is a metabolic disease characterized by high levels of uric acid(UA)in the blood and varying degrees of kidney damage.Desirable nanoliposomes should simultaneously exhibit efficient biocompatibility ...Hyperuricemia(HUA)is a metabolic disease characterized by high levels of uric acid(UA)in the blood and varying degrees of kidney damage.Desirable nanoliposomes should simultaneously exhibit efficient biocompatibility and effective drug delivery.However,they both usually require special structural properties.Herein,we propose a strategy to prepare nanoliposomes with varying rigidity by replacing cholesterol(CH)with phytosterol esters(PE).The results showed that the particle size of PE naringenin nanoliposomes(PE-NAR)was 179.5 nm,and the encapsulation efficiency(EE)was 79.93%.In atomic force microscopy(AFM)tests,PE-NAR showed a 1-fold increase in rigidity compared to CH naringenin nanoliposomes(CH-NAR).By observing the effects of naringenin nanoliposomes(NAR-NLs)on the physiological and biochemical indicators in HUA mice,we explore its impact on kidney damage and inflammatory pathways in HUA mice.The results show that NAR-NLs significantly inhibit UA levels and improve kidney damage.Compared to oral naringenin,NAR-NLs generally enhance the in vivo antioxidant effects of naringenin.Furthermore,high-rigidity PE-NAR downregulated the renal inflammatory factor interleukin-1β(IL-1β)to 6.67%,demonstrating the highest inhibitory effect.Further experiments have demonstrated that naringenin exerts a protective effect in kidney injury by inhibiting the activation of NOD like receptor protein 3(NLRP3)inflammasome and reducing oxidative stress within the body.In summary,by adjusting the rigidity of the nanoliposomes,the oral administration of naringenin can effectively improve the alleviation of HUA.展开更多
Low-density short-duration pulsed current-assisted aging treatment was applied to the Ti-6Al-4V-0.5Mo-0.5Zr alloy subjected to different solution treatments.The results show that numerous α_(p) phases redissolve into...Low-density short-duration pulsed current-assisted aging treatment was applied to the Ti-6Al-4V-0.5Mo-0.5Zr alloy subjected to different solution treatments.The results show that numerous α_(p) phases redissolve into the new β phase during the pulsed current-assisted aging process,and then the newly formed β phase is mainly transformed into the β_(t) phase,with occasional transition to new α_(p) phase,leading to a remarkable grain refinement,especially for the lamellarαs phases.In comparison to conventional aging treatment,the pulsed current-assisted aging approach achieves a significant enhancement in strength without degrading ductility,yielding an excellent mechanical property combination:a yield strength of 932 MPa,a tensile strength of 1042 MPa,and an elongation of 12.2%.It is primarily ascribed to the increased fraction of β_(t) phases,the obvious grain refinement effect,and the slip block effect induced by the multiple-variantαs colonies distributed within β_(t) phases.展开更多
Extensive research has shown that externally bonded carbon fiber reinforced polymer （CFRP） laminates are particularly suitable for improving the fatigue behavior of reinforced concrete （RC） beams. This paper prese...Extensive research has shown that externally bonded carbon fiber reinforced polymer （CFRP） laminates are particularly suitable for improving the fatigue behavior of reinforced concrete （RC） beams. This paper presents the research on flexural ngidity evolvement laws by testing 14 simple-supported RC beams strengthened with carbon fiber laminates （CFL） under cyclic load, and 2 under monotone load as a reference. The cyclic load tests revealed the peak load applied onto the surface of a supported RC beam strengthened with CFL is linear to the logarithm of its fatigue life, and the flexural rigidity evolvement undergoes three distinct phases： a rapid decrease from the start to about 5% of the fatigue life; an even development from .5% to about 99% of the fatigue life; and a succedent rapid decrease to failure. When the ratio of fatigue ＂cycles to the fatigue life is within 0.0.5 to 0.99, the flexural rigidity varies linearly with the ratio. The peak load does not affect the flexural rigidity evolvement if it is not high enough to make the main reinforcements yield. The dependences of the flexural rigidity of specimens formed in the same group upon their fatigue cycles normalized by fatigue life are almost coincident. This implies the flexural rigidity may be a material parameter independent of the stress level. These relationships of flexural rigidity to fatigue cycles, and fatigue life may be able to provide some hints for fatigue design and fatigue life evaluation of RC member strengthened with CFL; nevertheless the findings still need verifying by more experiments.展开更多
Background Computed tomography(CT) and cone-beam computed tomography(CBCT) image registration play pivotal roles in computer-assisted navigation for orthopedic surgery. Traditional methods often apply uniform deformat...Background Computed tomography(CT) and cone-beam computed tomography(CBCT) image registration play pivotal roles in computer-assisted navigation for orthopedic surgery. Traditional methods often apply uniform deformation models, neglecting the biomechanical differences between rigid structures and soft tissues, which compromises registration accuracy, especially during significant bone displacements. Method To address this issue, we introduce RE-Reg, a rigid-elastic CT-CBCT image registration framework that jointly learns rigid bone motion and soft tissue deformation. RE-Reg incorporates a rigid alignment(RA) module to estimate global bone motion and an elastic deformation(ED) module to model soft tissue deformation, preserving bony structures through bone shape preservation(BSP) loss. Result Our comprehensive evaluation on publicly available datasets demonstrates that RE-Reg significantly outperforms existing methods in terms of registration accuracy and rigid bone structure preservation, achieving a 1.3% improvement in Dice similarity coefficient(DSC) and a 23% reduction in rigid bone deformation(%Δvol) compared with the best baseline. Conclusion This framework not only enhances anatomical fidelity but also ensures biomechanical plausibility and provides a valuable tool for image-guided orthopedic surgery. This code is available athttps://github.com/Zq-Huang/RE-Reg.展开更多
We report first-principles predictions of a cage-like polymeric nitrogen phase(cage-N)composed of interlocked N10 clusters stabilized by mixed sp^(2)/sp^(3) hybridization.Under high pressure,cage-N exhibits exceptiona...We report first-principles predictions of a cage-like polymeric nitrogen phase(cage-N)composed of interlocked N10 clusters stabilized by mixed sp^(2)/sp^(3) hybridization.Under high pressure,cage-N exhibits exceptional mechanical performance,including an ideal compressive strength of 343 GPa at a pressure of 300 GPa,~33% higher than that of diamond.This ultrahigh strength arises from the synergistic interplay between its three-dimensional covalent framework and hybridized bonding topology,which enables isotropic stress accommodation and dynamic electronic rearrangement.These results establish cage-N as a promising non-carbon ultrahard material and provide a bonding-driven route toward designing superhard frameworks under extreme conditions.展开更多
The insufficient absolute strength of Mg-Li alloys severely restricts their aerospace applications.To address this limitation,a dual-phase Mg-Li alloy with enhanced strength was fabricated through rapid solidification...The insufficient absolute strength of Mg-Li alloys severely restricts their aerospace applications.To address this limitation,a dual-phase Mg-Li alloy with enhanced strength was fabricated through rapid solidification combined with hot-press sintering and extrusion.The optimized alloy exhibited yield and ultimate tensile strengths of 283 MPa and 306 MPa under quasi-static loading,respectively,while retaining a uniform elongation of 6%.Multiscale microstructural characterization via XRD,SEM-EBSD,and TEM revealed that rapid solidification induced remarkable grain refinement and precipitate redistribution.Subsequent thermomechanical processing achieved full dynamic recrystallization with refined grains.Crucially,the rapid solidification kinetics notably altered Al partitioning,favoring solid solution in magnesium phase over precipitation in lithium phase.These microstructural modifications activate synergistic strengthening mechanisms:1)Hall-Petch hardening from grain refinement,2)dispersion strengthening via nano-precipitates,3)dislocation strengthening from substructures,and 4)solid solution effects from Al supersaturation.This work establishes a microstructure design paradigm for high-performance Mg-Li alloys through coupled rapid solidification and thermomechanical processing.展开更多
The penetration of shaped charge jets into targets at high velocities is significantly influenced by the compressibility effect,while at low velocities,the strength effect becomes predominant.In the latter regime,mate...The penetration of shaped charge jets into targets at high velocities is significantly influenced by the compressibility effect,while at low velocities,the strength effect becomes predominant.In the latter regime,material strength dictates the resistance to plastic deformation and flow,a contrast to the shockwave-dominated interactions where compressibility is key.This paper presents a self-consistent compressible penetration theory that considers both the axial penetration and radial crater growth of shaped charge jets into targets.An integrated approach where the axial and radial dynamics are coupled has been proposed,influencing each other through shared physical principles rather than being treated as separate,empirically linked phenomena.The presented theory is rooted in the compressible Bernoulli equation and the linear Rankine-Hugoniot relation.These foundational equations are employed to accurately model the high-pressure shock state and subsequent material flow at the jet-target interface,providing a robust physical basis for the penetration model.Notably,it considers the target material's compressibility,which elevates the pressure at the jet-target interface beyond that observed with incompressible materials.This pressure increase is directly proportional to the target's degree of compressibility.As such,this model of compressible penetration reorients the analytical approach:rather than merely estimating penetration resistance,it determines this value from the target material's specific compressibility and yield strength.This shift from empirical correlations to a physics-based derivation of penetration resistance enhances the model's predictive power,particularly for novel target materials or engagement conditions outside established experimental datasets.This investigation establishes a quantitative link between the material's yield strength and its penetration resistance.The accuracy of this penetration resistance value is paramount,as it significantly influences the predicted crater diameter;indeed,the crater diameter's sensitivity to this resistance underscores the necessity for its precise determination.Ultimately,by integrating the yield strength of the target material,this framework enables the prediction of both the penetration depth and the resultant crater diameter from a shaped charge jet.The theory's validation involved two experimental sets:the first focused on shaped charge jet penetration into 45#steel at varied stand-offs,while the second utilized targets of high-to ultrahigh-strength steel-fiber reactive powder concrete(RPC)with differing strength characteristics.These experimental campaigns were specifically chosen to test the theory against both ductile metallic alloys,where plastic flow is significant,and advanced quasi-brittle cementitious composites,presenting a broad spectrum of material responses and penetration challenges.Resulting hole profiles derived from theoretical calculations demonstrated a strong correspondence with empirical measurements for both material types.展开更多
We employed machine learning approaches and visualization interpretation methods to explore the influencing factors of the compressive strength of sea sand concrete to attain a better understanding of the inherent law...We employed machine learning approaches and visualization interpretation methods to explore the influencing factors of the compressive strength of sea sand concrete to attain a better understanding of the inherent laws of concrete mix design.Four models,including random forest,Cat Boost,XGBoost,and deep neural network,were trained.The experimental results demonstrate that the XGBoost model performs the best in predicting the strength of sea sand concrete.Its R^(2)value reached 0.9999,and evaluation indexes such as MAPE,RMSE,MAE,and MSE are superior to those of other models.The principal component analysis(PCA)was conducted to visually analyze the structure and distribution of the original feature data,and Pearson correlation coefficient analysis and Shapley additive explanation(SHAP)were utilized to explore the impact of input characteristics on the strength of sea sand concrete.SHAP analysis is more conducive to revealing the nonlinear effects of various characteristics on the model prediction results,especially that particle size of stone has significant impacts on the strength of sea sand concrete.In addition,experimental verification was carried out to confirm the accuracy of the optimized training model.These findings offer some insights for the future design and application of sea sand in high-performance marine and coastal infrastructure.展开更多
The low ionic conductivity and poor mechanical strength of polyethylene oxide(PEO)-based electrolytes severely restrict their practical application.To address this problem,this work designs a scalable,high-strength(24...The low ionic conductivity and poor mechanical strength of polyethylene oxide(PEO)-based electrolytes severely restrict their practical application.To address this problem,this work designs a scalable,high-strength(24.3 MPa)bicontinuous porous poly(m-phthaloyl-m-phenylenediamine)(PMIA)membrane integrated into PEO/LiTFSI(PL),thus forming a PMIA/PEO/LiTFSI(PPL)composite electrolyte.Compared to the PL electrolyte,the PPL electrolyte reinforced by a bicontinuous porous PMIA membrane exhibits significantly enhanced mechanical strength,reaching 13.4 MPa.In addition,the amide groups on PMIA strongly coordinate with LiTFSI and form hydrogen bonds with PEO,promoting Li salt dissociation and reducing the Li^(+)migration barrier.This creates efficient,fast Li^(+)transport channels at the PMIA/PL interfaces,effectively promoting the uniform Li^(+)deposition and minimizing lithium dendrite formation.The PPL electrolyte achieves high ionic conductivity(1×10^(−4)S cm^(−1)at 30°C)and Li^(+)transference number(tLi^(+)=0.43).The assembled LiFePO_(4)/Li battery demonstrates excellent cycling stability,retaining 80%capacity after 2000 cycles at 2 C,while the Li/Li symmetric cell operates stably for over 900 h at 0.3 mA cm^(−2).Therefore,the scalable porous PMIA membrane effectively enhances both the mechanical strength and Li^(+)transport in PEO-based electrolytes,offering a viable strategy for their commercial-scale implementation.展开更多
Purpose:ATLAS is a cross-sectional study aiming to investigate environmental and genetic determinants of athletic performance in healthy Greek competitive athletes(CA).This article presents the study design,investigat...Purpose:ATLAS is a cross-sectional study aiming to investigate environmental and genetic determinants of athletic performance in healthy Greek competitive athletes(CA).This article presents the study design,investigates the muscle strength performance(MSP)of 289 adult and teenage CA,exercisers,and physically inactive individuals(PI),and proposes predictive models of MSP for adults.Methods:Muscle maximal,speed,and explosive strength(MMS/MSS/MES)at unilateral maximal concentric flexion and extension contraction(FC/EC)were evaluated using Biodex System 3 PRO^(TM)at 60°/s,180°/s,and 300°/s,while additional performance markers were assessed through field ergometric testing.Participants were interviewed about their lifestyle,dietary habits,physical activity,injury,and medical history.Body composition was assessed via bioelectrical impedance.gDNA was extracted from biochemical samples and then genotyped.Statistical analysis was conducted using IBM SPSS Statistics v21.0 and R.Results:Age,fitness,and sex impacted correlations of MSP with body composition and anthropometric measurements(p<0.05).Among CA,females outperformed males in accuracy(p<0.001)while,males outperformed females in anaerobic power,MSP,speed,and endurance(p<0.001).Adult CA outperformed exercisers and PI in MMS,MSS,and MES(p<0.05).Multiple linear regression models,with predictors age,FFM,body extremity,training load explained the majority of variation in MMS(R^(2)_(adj):71.4%–88.9%),MSS(R^(2)_(adj):64.8%–78.4%),and MES(R^(2)_(adj):52.7%–68.4%)at EC,FC,and their mean(p<0.001).Conclusions:Muscle-strengthening strategies should be customized according to individual fitness levels,body composition,and anthropometric measurements.The innovative sex-specific regression models assessing MMS,MSS,and MES at EC and FC provide a framework for personalizing rehabilitation and skill-specific training strategies.展开更多
Rock mass stability is significantly influenced by the heterogeneity of rock joint roughness and shear strength.While modern technology facilitates assessing roughness heterogeneity,evaluating shear strength heterogen...Rock mass stability is significantly influenced by the heterogeneity of rock joint roughness and shear strength.While modern technology facilitates assessing roughness heterogeneity,evaluating shear strength heterogeneity remains challenging.To address this,this study first captures the morphology of large-scale(1000 mm × 1000 mm) slate and granite joints via 3D laser scanning.Analysis of these surfaces and corresponding push/pull tests on carved specimens revealed a potential correlation between the heterogeneity of roughness and shear strength.A comparative evaluation of five statistical metrics identified information entropy(Hs) as the most robust indicator for quantifying rock joint heterogeneity.Further analysis using Hsreveals that the heterogeneity is anisotropic and,critically,that shear strength heterogeneity is governed not only by roughness heterogeneity but is also significantly influenced by the mean roughness value,normal stress,and intact rock tensile strength.Consequently,a simple comparison of roughness Hsvalues is insufficient for reliably comparing shear strength heterogeneity.To overcome this limitation,a theoretical framework is developed to explicitly map fundamental roughness statistics(mean and heterogeneity) to shear strength heterogeneity.This framework culminates in a practical workflow that allows for the rapid,field-based assessment of shear strength heterogeneity using readily obtainable rock joint roughness data.展开更多
Different from previous attention on the austenization temperature or dwelling time of PH13-8Mo stainless steels,the effect of the cooling rate on the hierarchical microstructure and mechanical properties was revealed...Different from previous attention on the austenization temperature or dwelling time of PH13-8Mo stainless steels,the effect of the cooling rate on the hierarchical microstructure and mechanical properties was revealed.For all of water,oil,air and furnace cooling,there is almost-complete martensite with the favorable hardenability.The increase in cooling rate mainly increases the density of dislocation and residual strain in the as-solution annealed matrix.After aging treatment,the cooling rate dominates the ratio of high-angle grain boundaries(HAGBs)instead of the size of martensite blocks.The ratio of HAGBs continuously increases with the decreased cooling rate,while the width of blocks maintains 2.40-2.49μm.Meanwhile,more reversed austenite distributes at the martensite sub-grain boundaries.By comparison,the increased rate of water cooling contributes to a favorable precipitation of NiAl with fine size and dispersive distribution caused by more accumulated internal defects of vacancies and dislocations.With the decrease of cooling rate,NiAl precipitates exhibits a similar diameter of~7 nm while a larger inter-particle distance of~22 nm.In the case of low cooling rate(oil,air and furnace),the stable precipitation strengthening effect contributes to a high yield strength of~1.3 GPa and ultimate tensile strength of~1.4 GPa.The high-ratio HAGBs,reversed austenite and NiAl precipitates with larger-interparticle distance synergistically improve the impact toughness(V-notched Charpy impact energy of 100-110 J).展开更多
The traditional"trial and error"microstructural control method,with high cost and low efficiency,has become a key issue restricting the development of ultra-high strength and toughness titanium alloys.This s...The traditional"trial and error"microstructural control method,with high cost and low efficiency,has become a key issue restricting the development of ultra-high strength and toughness titanium alloys.This study adopts the molybdenum equivalent(Mo_([eq]))method to rapidly design Ti-xMo-4Al-4Zr-3Nb-2Cr-1Fe alloys(x=5-9).The as-cast alloys with different Mo_([eq])exhibit a single peak of theβphase in XRD.Theβgrains of 5Mo alloy(the lowest Mo_([eq]))exhibit elongated columnar grain characteristics.As the Mo_([eq])increases,theβgrains transition towards a more equiaxed form,resulting in a decrease in aspect ratio and a reduction in grain size.As the Mo_([eq])increases,the a phase content gradually decreases and the a phase is almost unobservable in 9Mo alloy(the highest Mo_([eq])).The a phase in 5Mo alloy exhibits short rod-shaped shapes with an average length of about2.4μm,while the a phase in 6Mo alloy shows an equiaxed and short rod shapes with the smallest size.The strength,plasticity,and toughness are the lowest in 5Mo alloy,with values of 867 MPa,7.3%,and 56 MPa·m^(1/2),respectively.However,it reaches its maximum in 6Mo alloy,where the strength,plasticity,and toughness increase to 984 MPa,12.8%,and 74 MPa·m^(1/2),respectively.The mechanical properties of Ti-xMo-4Al-4Zr-3Nb-2Cr-1Fe alloys are affected mainly by solid-solution strengthening of Mo element,refinement ofβgrain,and changes inα/βphase content.This study lays a certain theoretical foundation for the theoretical research and composition development of new ultra-high strength and toughness titanium alloys.展开更多
Ceramic cells promise ideal energy conversion and storage devices,making the development of efficient and robust air electrodes crucial for their application.In this study,a Ba_(0.4)Sr_(0.5)Cs_(0.1)Co_(0.7)Fe_(0.2)Nb_...Ceramic cells promise ideal energy conversion and storage devices,making the development of efficient and robust air electrodes crucial for their application.In this study,a Ba_(0.4)Sr_(0.5)Cs_(0.1)Co_(0.7)Fe_(0.2)Nb_(0.1)O_(3−δ)(BSCCFN)air electrode,based on Ba_(0.5)Sr_(0.5)Co_(0.8)Fe_(0.2)O_(3−δ)(BSCF),is designed using a perovskite A-B-site ionic Lewis acid strength(ISA)polarization distribution strategy and is successfully applied in both oxygen-ion conducting solid oxide fuel cells(O-SOFCs)and proton-conducting reversible protonic ceramic cells(R-PCCs).When BSCCFN is used as the air electrode in O-SOFCs,a peak power density(PPD)of 1.45 W cm^(−2)is achieved at 650°C,whereas in R-PCCs,a PPD of 1.13 W cm^(−2)and a current density of−1.8 A cm^(−2)at 1.3 V are achieved at the same temperature and show stable reversibility over 100 h.Experimental measurements and theoretical calculations demonstrate that low-ISA Cs+doping accelerates the reaction kinetics of both oxygen ions and protons,while high-ISA Nb^(5+)doping enhances electrode stability.The synergistic effect of Cs^(+)and Nb^(5+)co-doping in the BSCCFN electrode lies in the ISA polarization distribution,which weakens the Co/Fe–O bond covalency,thereby promoting oxygen vacancy formation and facilitating the conduction of oxygen ions and protons.展开更多
Additive Manufacturing,also known as 3D printing,has transformed conventional manufacturing by building objects layer by layer,with material extrusion or fused deposition modeling standing out as particularly popular....Additive Manufacturing,also known as 3D printing,has transformed conventional manufacturing by building objects layer by layer,with material extrusion or fused deposition modeling standing out as particularly popular.However,due to its manufacturing process and thermal nature,internal voids and pores are formed within the thermoplastic materials being fabricated,potentially leading to a decrease in mechanical properties.This paper discussed the effect of printing parameters on the porosity and the mechanical properties of the 3D printed polylactic acid(PLA)through micro-computed tomography(microCT),computational image analysis,and Charpy impact testing.The results for both tests were correlated to investigate the relationship between porosity and Charpy impact strength.PLA samples of 1 cm^(3)×1 cm^(3)×1 cm^(3) were 3D printed at printing temperatures of 180℃,200℃,220℃,and 240℃,and at printing speeds of 50,80,and 110 mm/s,while porosity was measured frommicroCT-reconstructed data.Additionally,impact strength was assessed using a notched Charpy impact tester following ASTMD6610-18.In general,results show that higher printing temperatures and lower printing speeds reduced pore size by improving material flow and fusion,while also increasing impact strength due to better thermal bonding and interlayer adhesion.A maximum 36.8% reduction in mean pore size and a 114% improvement in impact strength were observed at 110 mm/s and 220℃.Conversely,increasing printing speed led to lowerCharpy impact strength.Optimal impact behavior andminimal voids were observed at a printing temperature of 220℃ and a printing speed of 50 mm/s.展开更多
To investigate the strength degradation characteristics and microscopic damage mechanisms of moraine soil under hydro-thermo-mechanical coupling conditions,a series of X-ray Diffraction(XRD),standard triaxial testing,...To investigate the strength degradation characteristics and microscopic damage mechanisms of moraine soil under hydro-thermo-mechanical coupling conditions,a series of X-ray Diffraction(XRD),standard triaxial testing,Scanning Electron Microscopy(SEM),and Nuclear Magnetic Resonance(NMR)experiments were conducted.The mechanical property degradation laws and evolution characteristics of the microscopic pore structure of moraine soil under Freeze-Thaw(F-T)conditions were revealed.After F-T cycles,the stress-strain curves of moraine soil showed a strain-softening trend.In the early stage of F-T cycles(0–5 cycles),the shear strength and elastic modulus exhibited damage rate of approximately 10.33%±0.8%and 16.60%±1.2%,respectively.In the later stage(10–20 cycles),the strength parameters fluctuated slightly and tended to stabilize.The number of F-T cycles was negatively exponentially correlated with cohesion,while showing only slight fluctuation in the internal friction angle,thereby extending the Mohr-Coulomb strength criterion for moraine soil under F-T cycles.The NMR experiments quantitatively characterized the evolution of the internal pore structure of moraine soil under F-T cycles.As the number of F-T cycles increased,fine and micro pores gradually expanded and merged due to the frost-heaving effect during the water-ice phase transition,forming larger pores.The proportion of large and medium pores increased to 59.55%±2.1%(N=20),while that of fine and micro pores decreased to 40.45%±2.1%(N=20).The evolution of pore structure characteristics was essentially completed in the later stage of F-T cycles(10–20 cycles).This study provides a theoretical foundation and technical support for major engineering construction and disaster prevention in the Qinghai-Xizang Plateau.展开更多
基金financially supported by the National Natural Science Foundation of China(62464010)Spring City Plan-Special Program for Young Talents(K202005007)+3 种基金Yunnan Talents Support Plan for Yong Talents(XDYC-QNRC-2022-0482)Yunnan Local Colleges Applied Basic Research Projects(202101BA070001-138)Key Laboratory of Artificial Microstructures in Yunnan Higher EducationFrontier Research Team of Kunming University 2023。
文摘Zinc-ion batteries(ZIBs)are inexpensive and safe,but side reactions on the Zn anode and Zn dendrite growth hinder their practical applications.In this study,1,3,5-triformylphloroglycerol(Tp)and various diamine monomers(p-phenylenediamine(Pa),benzidine(BD),and 4,4"-diamino-p-terphenyl(DATP))were used to synthesize a series of two-dimensional covalent-organic frameworks(COFs).The resulting COFs were named TpPa,TpBD,and TpDATP,respectively,and they showed uniform zincophilic sites,different pore sizes,and high Young's moduli on the Zn anode.Among them,TpPa and TpBD showed lower surface work functions and higher ion transfer numbers,which were conducive to uniform galvanizing/stripping zinc and inhibited dendrite growth.Theoretical calculations showed that TpPa and TpBD had wider negative potential region and greater adsorption capacity for Zn2+than TpDATP,providing more electron donor sites to coordinate with Zn^(2+).Symmetric cells protected by TpPa and TpBD stably cycled for more than 2300 h,whereas TpDATP@Zn and the bare zinc symmetric cells failed after around 150 and200 h.The full cells containing TpPa and TpBD modification layers also showed excellent cycling capacity at 1 A/g.This study provides comprehensive insights into the construction of highly reversible Zn anodes via COF modification layers for advanced rechargeable ZIBs.
基金supported by the National Key Research and Development Program of China(No.2021YFA1600304)Joint Fund for Regional Innovation and Development(No.U20A2073)+4 种基金National Natural Science Foundation of China(Nos.22373048,21973038,61904119 and 22105089)Jiangxi Provincial Key Laboratory of Functional Molecular Materials Chemistry(No.20212BCD42018)US National Science Foundation(NSF,No.CHE-2055499)the Interdisciplinary program of Wuhan National High Magnetic Field Center(No.WHMFC202133)the support of the NSF Research Traineeship Program(No.DGE-2152168)。
文摘Two CoⅡ-based complexes,{[Co(dps)_(2)(N_(3))_(2)]·H_(2)O}_n(1)and[Co(dps)_(2)(N_(3))_(2)]_n(2),show a 1D chain and a 3D network,respectively.The central CoⅡions in the complexes have the same coordination environment with the[Co(dps)_(4)(N_(3))_(2)]unit.Although the differences in crystal parameters are nearly negligible,their magnetic properties are very different.AC susceptibility data show that 1 behaves as a typical field-induced single-ion magnet(SIM)with the out-of-phase(χ_(M)”)signals,while 2 shows ac signals ofχ_(M)”without peaks even under applied dc filed within our measurement window.Far-IR magneto-spectra(FIRMS)show strong spin-phonon couplings at 0 T in 2,likely making the magnetic relaxation in 2 fast,while the couplings are negligible in 1.Small spin-phonon coupling in 1 likely leads to slower magnetic relaxation,making 1 a SIM.The difference in the properties is due to the structural rigidity of 2 in its 3D network,leading to stronger spin-phonon coupling.Combined high-field EPR(HF-EPR)and FIRMS studies give spin-Hamiltonian parameters,including D=64.0(9)cm^(-1),|E|=15.7(2)cm^(-1)for 1 and D=80.0(2)cm^(-1),|E|=19.0(1)cm^(-1)for 2.
文摘From[J.Differential Geom.,1990,31(1):285-299],one can obtain that compact self-shrinking hypersufaces in R^(n+1) with constant scalar curvature must be the standard sphere S^(n)(√n)(cf.[Front.Math.,2023,18(2):417-430]).This result was generalized by Guo[J.Math.Soc.Japan,2018,70(3):1103-1110]with assumption of a lower or upper scalar curvature bound.In this paper,we will generalize the scalar curvature rigidity theorem of Guo to the case of λ-hypersurfaces.We will also give an alternative proof of the theorem(cf.[2014,arXiv:1410.5302]and[Proc.Amer.Math.Soc.,2018,146(10):4459-4471])that λ-hypersurfaces which are entire graphs must be hyperplanes.
文摘Five cadmium naphthalene-diphosphonates,formulated as[Cd_(1.5)(1,4-ndpaH_(2))2(4,4'-bpyH)(4,4'-bpy)0.5(H_(2)O)_(2)]2(1),[Cd(1,4-ndpaH_(2))(1,4-bib)0.5(H_(2)O)](2),[Cd(1,4-ndpaH3)2(1,2-dpe)(H_(2)O)]·(1,2-dpe)·7H_(2)O(3),(1,2-bixH)[Cd3(1,4-ndpaH)(1,4-ndpaH_(2))2(H_(2)O)_(2)](4),and[Cd(1,4-ndpaH_(2))(H_(2)O)]·H_(2)O(5),have been synthesized from the selfassembly reactions of 1,4-naphthalenediphosphonic acid(1,4-ndpaH4)with Cd(NO3)2·4H_(2)O by introducing auxiliary ligands with variation of rigidity,such as 4,4'-bipyridine(4,4'-bpy),1,4-bis(1-imidazolyl)benzene(1,4-bib),1,2-di(4-pyridyl)ethylene(1,2-dpe),1,3-di(4-pyridyl)propane(1,3-dpp),and bis(imidazol-1-ylmethyl)benzene(1,2-bix),respectively.Structure resolution by single-crystal X-ray diffraction reveals that compound 1 possesses a layered framework,in which the{Cd3(PO2)2}trimers made up of corner-sharing two{CdO4N2}and one{CdO6}octahedra are connected by phosphonate groups,forming a ribbon,which are cross-linked by 4,4'-bipy ligands,forming a 2D layer.Compound 2 shows a 3D open-framework structure,where chains of corner-sharing{CdO4N}trigonal bipyramids and{PO3C}tetrahedra are cross-linked by 1,4-bib and/or phosphonate groups.A 1D ladder-like chain structure is found in compound 3,where the ladder-like chains made up of corner-sharing{CdO5N}octahedra and{PO3C}tetra hedra are connected by 1,4-ndpaH_(2)^(2-).Both compounds 4 and 5 obtained by the introduction of flexible ligands during the synthesis show a 2D layered structure,which is formed by ligand crosslinking double metal chains.Interestingly,In 4,flexible 1,2-bix was singly protonated,as vip molecules,filled between layer and layer,while flexible ligand 1,3-dpp is absent in 5.Photophysical measurements indicate that compounds 1-5 show ligand-centered emissions.
基金funded by National Key R&D Plan of China(2024YFE0109500)the National Natural Science Foundation of China(32472367,32372249)Key Program of the Natural Science Foundation of Zhejiang Province(HZSZ25C200001).
文摘Hyperuricemia(HUA)is a metabolic disease characterized by high levels of uric acid(UA)in the blood and varying degrees of kidney damage.Desirable nanoliposomes should simultaneously exhibit efficient biocompatibility and effective drug delivery.However,they both usually require special structural properties.Herein,we propose a strategy to prepare nanoliposomes with varying rigidity by replacing cholesterol(CH)with phytosterol esters(PE).The results showed that the particle size of PE naringenin nanoliposomes(PE-NAR)was 179.5 nm,and the encapsulation efficiency(EE)was 79.93%.In atomic force microscopy(AFM)tests,PE-NAR showed a 1-fold increase in rigidity compared to CH naringenin nanoliposomes(CH-NAR).By observing the effects of naringenin nanoliposomes(NAR-NLs)on the physiological and biochemical indicators in HUA mice,we explore its impact on kidney damage and inflammatory pathways in HUA mice.The results show that NAR-NLs significantly inhibit UA levels and improve kidney damage.Compared to oral naringenin,NAR-NLs generally enhance the in vivo antioxidant effects of naringenin.Furthermore,high-rigidity PE-NAR downregulated the renal inflammatory factor interleukin-1β(IL-1β)to 6.67%,demonstrating the highest inhibitory effect.Further experiments have demonstrated that naringenin exerts a protective effect in kidney injury by inhibiting the activation of NOD like receptor protein 3(NLRP3)inflammasome and reducing oxidative stress within the body.In summary,by adjusting the rigidity of the nanoliposomes,the oral administration of naringenin can effectively improve the alleviation of HUA.
基金National Key Research and Development Program of China(2021YFB3700801)。
文摘Low-density short-duration pulsed current-assisted aging treatment was applied to the Ti-6Al-4V-0.5Mo-0.5Zr alloy subjected to different solution treatments.The results show that numerous α_(p) phases redissolve into the new β phase during the pulsed current-assisted aging process,and then the newly formed β phase is mainly transformed into the β_(t) phase,with occasional transition to new α_(p) phase,leading to a remarkable grain refinement,especially for the lamellarαs phases.In comparison to conventional aging treatment,the pulsed current-assisted aging approach achieves a significant enhancement in strength without degrading ductility,yielding an excellent mechanical property combination:a yield strength of 932 MPa,a tensile strength of 1042 MPa,and an elongation of 12.2%.It is primarily ascribed to the increased fraction of β_(t) phases,the obvious grain refinement effect,and the slip block effect induced by the multiple-variantαs colonies distributed within β_(t) phases.
基金National Natural Science Foundation of China (No.10272047)the Natural Science Foundation of Guangdong Province (No.020856)
文摘Extensive research has shown that externally bonded carbon fiber reinforced polymer （CFRP） laminates are particularly suitable for improving the fatigue behavior of reinforced concrete （RC） beams. This paper presents the research on flexural ngidity evolvement laws by testing 14 simple-supported RC beams strengthened with carbon fiber laminates （CFL） under cyclic load, and 2 under monotone load as a reference. The cyclic load tests revealed the peak load applied onto the surface of a supported RC beam strengthened with CFL is linear to the logarithm of its fatigue life, and the flexural rigidity evolvement undergoes three distinct phases： a rapid decrease from the start to about 5% of the fatigue life; an even development from .5% to about 99% of the fatigue life; and a succedent rapid decrease to failure. When the ratio of fatigue ＂cycles to the fatigue life is within 0.0.5 to 0.99, the flexural rigidity varies linearly with the ratio. The peak load does not affect the flexural rigidity evolvement if it is not high enough to make the main reinforcements yield. The dependences of the flexural rigidity of specimens formed in the same group upon their fatigue cycles normalized by fatigue life are almost coincident. This implies the flexural rigidity may be a material parameter independent of the stress level. These relationships of flexural rigidity to fatigue cycles, and fatigue life may be able to provide some hints for fatigue design and fatigue life evaluation of RC member strengthened with CFL; nevertheless the findings still need verifying by more experiments.
基金Supported by the National Natural Science Foundation of China(Grant Nos.62025104,62331005,and U22A2052)the Beijing Natural Science Foundation(Grant No.L242100).
文摘Background Computed tomography(CT) and cone-beam computed tomography(CBCT) image registration play pivotal roles in computer-assisted navigation for orthopedic surgery. Traditional methods often apply uniform deformation models, neglecting the biomechanical differences between rigid structures and soft tissues, which compromises registration accuracy, especially during significant bone displacements. Method To address this issue, we introduce RE-Reg, a rigid-elastic CT-CBCT image registration framework that jointly learns rigid bone motion and soft tissue deformation. RE-Reg incorporates a rigid alignment(RA) module to estimate global bone motion and an elastic deformation(ED) module to model soft tissue deformation, preserving bony structures through bone shape preservation(BSP) loss. Result Our comprehensive evaluation on publicly available datasets demonstrates that RE-Reg significantly outperforms existing methods in terms of registration accuracy and rigid bone structure preservation, achieving a 1.3% improvement in Dice similarity coefficient(DSC) and a 23% reduction in rigid bone deformation(%Δvol) compared with the best baseline. Conclusion This framework not only enhances anatomical fidelity but also ensures biomechanical plausibility and provides a valuable tool for image-guided orthopedic surgery. This code is available athttps://github.com/Zq-Huang/RE-Reg.
基金supported by the Natural Science Foundation of China(Grant Nos.T2325013,52288102,52090024,12034009,12474004,and 12304036)the National Key R&D Program of China Grant No.2023YFA1610000+1 种基金the Fundamental Research Funds for the Central Universitiesthe Program for Jilin University and Sun Yat-sen University.
文摘We report first-principles predictions of a cage-like polymeric nitrogen phase(cage-N)composed of interlocked N10 clusters stabilized by mixed sp^(2)/sp^(3) hybridization.Under high pressure,cage-N exhibits exceptional mechanical performance,including an ideal compressive strength of 343 GPa at a pressure of 300 GPa,~33% higher than that of diamond.This ultrahigh strength arises from the synergistic interplay between its three-dimensional covalent framework and hybridized bonding topology,which enables isotropic stress accommodation and dynamic electronic rearrangement.These results establish cage-N as a promising non-carbon ultrahard material and provide a bonding-driven route toward designing superhard frameworks under extreme conditions.
基金supported by The National Natural Science Foundation of China(Grant No.62204197)the Key R&D and Transformation Plan of Science and Technology Department of Qinghai Province(Grant No.2022-GX-156)Xi'an Association for Science and Technology(Grant No.959202313058).
文摘The insufficient absolute strength of Mg-Li alloys severely restricts their aerospace applications.To address this limitation,a dual-phase Mg-Li alloy with enhanced strength was fabricated through rapid solidification combined with hot-press sintering and extrusion.The optimized alloy exhibited yield and ultimate tensile strengths of 283 MPa and 306 MPa under quasi-static loading,respectively,while retaining a uniform elongation of 6%.Multiscale microstructural characterization via XRD,SEM-EBSD,and TEM revealed that rapid solidification induced remarkable grain refinement and precipitate redistribution.Subsequent thermomechanical processing achieved full dynamic recrystallization with refined grains.Crucially,the rapid solidification kinetics notably altered Al partitioning,favoring solid solution in magnesium phase over precipitation in lithium phase.These microstructural modifications activate synergistic strengthening mechanisms:1)Hall-Petch hardening from grain refinement,2)dispersion strengthening via nano-precipitates,3)dislocation strengthening from substructures,and 4)solid solution effects from Al supersaturation.This work establishes a microstructure design paradigm for high-performance Mg-Li alloys through coupled rapid solidification and thermomechanical processing.
基金the Fundamental Research Funds for the Central Universities of Nanjing University of Science and Technology(CN)under Grant No.30924010803。
文摘The penetration of shaped charge jets into targets at high velocities is significantly influenced by the compressibility effect,while at low velocities,the strength effect becomes predominant.In the latter regime,material strength dictates the resistance to plastic deformation and flow,a contrast to the shockwave-dominated interactions where compressibility is key.This paper presents a self-consistent compressible penetration theory that considers both the axial penetration and radial crater growth of shaped charge jets into targets.An integrated approach where the axial and radial dynamics are coupled has been proposed,influencing each other through shared physical principles rather than being treated as separate,empirically linked phenomena.The presented theory is rooted in the compressible Bernoulli equation and the linear Rankine-Hugoniot relation.These foundational equations are employed to accurately model the high-pressure shock state and subsequent material flow at the jet-target interface,providing a robust physical basis for the penetration model.Notably,it considers the target material's compressibility,which elevates the pressure at the jet-target interface beyond that observed with incompressible materials.This pressure increase is directly proportional to the target's degree of compressibility.As such,this model of compressible penetration reorients the analytical approach:rather than merely estimating penetration resistance,it determines this value from the target material's specific compressibility and yield strength.This shift from empirical correlations to a physics-based derivation of penetration resistance enhances the model's predictive power,particularly for novel target materials or engagement conditions outside established experimental datasets.This investigation establishes a quantitative link between the material's yield strength and its penetration resistance.The accuracy of this penetration resistance value is paramount,as it significantly influences the predicted crater diameter;indeed,the crater diameter's sensitivity to this resistance underscores the necessity for its precise determination.Ultimately,by integrating the yield strength of the target material,this framework enables the prediction of both the penetration depth and the resultant crater diameter from a shaped charge jet.The theory's validation involved two experimental sets:the first focused on shaped charge jet penetration into 45#steel at varied stand-offs,while the second utilized targets of high-to ultrahigh-strength steel-fiber reactive powder concrete(RPC)with differing strength characteristics.These experimental campaigns were specifically chosen to test the theory against both ductile metallic alloys,where plastic flow is significant,and advanced quasi-brittle cementitious composites,presenting a broad spectrum of material responses and penetration challenges.Resulting hole profiles derived from theoretical calculations demonstrated a strong correspondence with empirical measurements for both material types.
基金Funded by the Chongqing Natural Science Foundation Project(No.cstc202ljcyj-msxmX0725)。
文摘We employed machine learning approaches and visualization interpretation methods to explore the influencing factors of the compressive strength of sea sand concrete to attain a better understanding of the inherent laws of concrete mix design.Four models,including random forest,Cat Boost,XGBoost,and deep neural network,were trained.The experimental results demonstrate that the XGBoost model performs the best in predicting the strength of sea sand concrete.Its R^(2)value reached 0.9999,and evaluation indexes such as MAPE,RMSE,MAE,and MSE are superior to those of other models.The principal component analysis(PCA)was conducted to visually analyze the structure and distribution of the original feature data,and Pearson correlation coefficient analysis and Shapley additive explanation(SHAP)were utilized to explore the impact of input characteristics on the strength of sea sand concrete.SHAP analysis is more conducive to revealing the nonlinear effects of various characteristics on the model prediction results,especially that particle size of stone has significant impacts on the strength of sea sand concrete.In addition,experimental verification was carried out to confirm the accuracy of the optimized training model.These findings offer some insights for the future design and application of sea sand in high-performance marine and coastal infrastructure.
基金supported by the National Natural Science Foundation of China(52273059,52203066,52403046 and 52473219)the Science and Technology Plans of Tianjin(22JCYBJC01030)+3 种基金the Tianjin Natural Science Foundation(23JCYBJC00660)the Tianjin Enterprise Science and Technology Commissioner Project(23YDTPJC00490)the China Postdoctoral Science Foundation Grant(2023M742135,2024T170525)the State Key Laboratory of Membrane and Membrane Separation,Tiangong University.
文摘The low ionic conductivity and poor mechanical strength of polyethylene oxide(PEO)-based electrolytes severely restrict their practical application.To address this problem,this work designs a scalable,high-strength(24.3 MPa)bicontinuous porous poly(m-phthaloyl-m-phenylenediamine)(PMIA)membrane integrated into PEO/LiTFSI(PL),thus forming a PMIA/PEO/LiTFSI(PPL)composite electrolyte.Compared to the PL electrolyte,the PPL electrolyte reinforced by a bicontinuous porous PMIA membrane exhibits significantly enhanced mechanical strength,reaching 13.4 MPa.In addition,the amide groups on PMIA strongly coordinate with LiTFSI and form hydrogen bonds with PEO,promoting Li salt dissociation and reducing the Li^(+)migration barrier.This creates efficient,fast Li^(+)transport channels at the PMIA/PL interfaces,effectively promoting the uniform Li^(+)deposition and minimizing lithium dendrite formation.The PPL electrolyte achieves high ionic conductivity(1×10^(−4)S cm^(−1)at 30°C)and Li^(+)transference number(tLi^(+)=0.43).The assembled LiFePO_(4)/Li battery demonstrates excellent cycling stability,retaining 80%capacity after 2000 cycles at 2 C,while the Li/Li symmetric cell operates stably for over 900 h at 0.3 mA cm^(−2).Therefore,the scalable porous PMIA membrane effectively enhances both the mechanical strength and Li^(+)transport in PEO-based electrolytes,offering a viable strategy for their commercial-scale implementation.
文摘Purpose:ATLAS is a cross-sectional study aiming to investigate environmental and genetic determinants of athletic performance in healthy Greek competitive athletes(CA).This article presents the study design,investigates the muscle strength performance(MSP)of 289 adult and teenage CA,exercisers,and physically inactive individuals(PI),and proposes predictive models of MSP for adults.Methods:Muscle maximal,speed,and explosive strength(MMS/MSS/MES)at unilateral maximal concentric flexion and extension contraction(FC/EC)were evaluated using Biodex System 3 PRO^(TM)at 60°/s,180°/s,and 300°/s,while additional performance markers were assessed through field ergometric testing.Participants were interviewed about their lifestyle,dietary habits,physical activity,injury,and medical history.Body composition was assessed via bioelectrical impedance.gDNA was extracted from biochemical samples and then genotyped.Statistical analysis was conducted using IBM SPSS Statistics v21.0 and R.Results:Age,fitness,and sex impacted correlations of MSP with body composition and anthropometric measurements(p<0.05).Among CA,females outperformed males in accuracy(p<0.001)while,males outperformed females in anaerobic power,MSP,speed,and endurance(p<0.001).Adult CA outperformed exercisers and PI in MMS,MSS,and MES(p<0.05).Multiple linear regression models,with predictors age,FFM,body extremity,training load explained the majority of variation in MMS(R^(2)_(adj):71.4%–88.9%),MSS(R^(2)_(adj):64.8%–78.4%),and MES(R^(2)_(adj):52.7%–68.4%)at EC,FC,and their mean(p<0.001).Conclusions:Muscle-strengthening strategies should be customized according to individual fitness levels,body composition,and anthropometric measurements.The innovative sex-specific regression models assessing MMS,MSS,and MES at EC and FC provide a framework for personalizing rehabilitation and skill-specific training strategies.
基金supported by the National Natural Science Foundation of China (Nos.42422705,42207175,42177117 and 42577170)the Ningbo Youth Leading Talent Project (No.2024QL051)+1 种基金the Chinese Academy of Engineering Science and Technology Strategy Consulting Project (No.2025-XZ-57)the Central Government Funding Program for Guiding Local Science and Technology Development (No.2025ZY01028)。
文摘Rock mass stability is significantly influenced by the heterogeneity of rock joint roughness and shear strength.While modern technology facilitates assessing roughness heterogeneity,evaluating shear strength heterogeneity remains challenging.To address this,this study first captures the morphology of large-scale(1000 mm × 1000 mm) slate and granite joints via 3D laser scanning.Analysis of these surfaces and corresponding push/pull tests on carved specimens revealed a potential correlation between the heterogeneity of roughness and shear strength.A comparative evaluation of five statistical metrics identified information entropy(Hs) as the most robust indicator for quantifying rock joint heterogeneity.Further analysis using Hsreveals that the heterogeneity is anisotropic and,critically,that shear strength heterogeneity is governed not only by roughness heterogeneity but is also significantly influenced by the mean roughness value,normal stress,and intact rock tensile strength.Consequently,a simple comparison of roughness Hsvalues is insufficient for reliably comparing shear strength heterogeneity.To overcome this limitation,a theoretical framework is developed to explicitly map fundamental roughness statistics(mean and heterogeneity) to shear strength heterogeneity.This framework culminates in a practical workflow that allows for the rapid,field-based assessment of shear strength heterogeneity using readily obtainable rock joint roughness data.
基金supported by the National Key Research and Development Program(Grant No.2024YFB3714200)the National Natural Science Foundation of China(Grant Nos.52173305,52233017,52203384,U244120568 and U2441261)+1 种基金the Key Program of the Chinese Academy of Sciences(Grant No.RCJJ-145-24-40)LingChuang Research Project of China National Nuclear Corporation,and Special Funds for Science and Technology Planning of Jiangsu Province(No.BZ2024059).
文摘Different from previous attention on the austenization temperature or dwelling time of PH13-8Mo stainless steels,the effect of the cooling rate on the hierarchical microstructure and mechanical properties was revealed.For all of water,oil,air and furnace cooling,there is almost-complete martensite with the favorable hardenability.The increase in cooling rate mainly increases the density of dislocation and residual strain in the as-solution annealed matrix.After aging treatment,the cooling rate dominates the ratio of high-angle grain boundaries(HAGBs)instead of the size of martensite blocks.The ratio of HAGBs continuously increases with the decreased cooling rate,while the width of blocks maintains 2.40-2.49μm.Meanwhile,more reversed austenite distributes at the martensite sub-grain boundaries.By comparison,the increased rate of water cooling contributes to a favorable precipitation of NiAl with fine size and dispersive distribution caused by more accumulated internal defects of vacancies and dislocations.With the decrease of cooling rate,NiAl precipitates exhibits a similar diameter of~7 nm while a larger inter-particle distance of~22 nm.In the case of low cooling rate(oil,air and furnace),the stable precipitation strengthening effect contributes to a high yield strength of~1.3 GPa and ultimate tensile strength of~1.4 GPa.The high-ratio HAGBs,reversed austenite and NiAl precipitates with larger-interparticle distance synergistically improve the impact toughness(V-notched Charpy impact energy of 100-110 J).
基金the financial support by the National Natural Science Foundation of China(Nos.U21A2042,52425401,U2441255,52474377)the Major Science and Technology Achievement Transformation Project in Heilongjiang Province(No.ZC2023SH0075)the Henan Provincial Key Research and Development&Promotion Special Program(No.251111231400)。
文摘The traditional"trial and error"microstructural control method,with high cost and low efficiency,has become a key issue restricting the development of ultra-high strength and toughness titanium alloys.This study adopts the molybdenum equivalent(Mo_([eq]))method to rapidly design Ti-xMo-4Al-4Zr-3Nb-2Cr-1Fe alloys(x=5-9).The as-cast alloys with different Mo_([eq])exhibit a single peak of theβphase in XRD.Theβgrains of 5Mo alloy(the lowest Mo_([eq]))exhibit elongated columnar grain characteristics.As the Mo_([eq])increases,theβgrains transition towards a more equiaxed form,resulting in a decrease in aspect ratio and a reduction in grain size.As the Mo_([eq])increases,the a phase content gradually decreases and the a phase is almost unobservable in 9Mo alloy(the highest Mo_([eq])).The a phase in 5Mo alloy exhibits short rod-shaped shapes with an average length of about2.4μm,while the a phase in 6Mo alloy shows an equiaxed and short rod shapes with the smallest size.The strength,plasticity,and toughness are the lowest in 5Mo alloy,with values of 867 MPa,7.3%,and 56 MPa·m^(1/2),respectively.However,it reaches its maximum in 6Mo alloy,where the strength,plasticity,and toughness increase to 984 MPa,12.8%,and 74 MPa·m^(1/2),respectively.The mechanical properties of Ti-xMo-4Al-4Zr-3Nb-2Cr-1Fe alloys are affected mainly by solid-solution strengthening of Mo element,refinement ofβgrain,and changes inα/βphase content.This study lays a certain theoretical foundation for the theoretical research and composition development of new ultra-high strength and toughness titanium alloys.
基金funding from the National Natural Science Foundation of China (Award 91745203) supplemented by Central Universities’ Basic Research Funds.
文摘Ceramic cells promise ideal energy conversion and storage devices,making the development of efficient and robust air electrodes crucial for their application.In this study,a Ba_(0.4)Sr_(0.5)Cs_(0.1)Co_(0.7)Fe_(0.2)Nb_(0.1)O_(3−δ)(BSCCFN)air electrode,based on Ba_(0.5)Sr_(0.5)Co_(0.8)Fe_(0.2)O_(3−δ)(BSCF),is designed using a perovskite A-B-site ionic Lewis acid strength(ISA)polarization distribution strategy and is successfully applied in both oxygen-ion conducting solid oxide fuel cells(O-SOFCs)and proton-conducting reversible protonic ceramic cells(R-PCCs).When BSCCFN is used as the air electrode in O-SOFCs,a peak power density(PPD)of 1.45 W cm^(−2)is achieved at 650°C,whereas in R-PCCs,a PPD of 1.13 W cm^(−2)and a current density of−1.8 A cm^(−2)at 1.3 V are achieved at the same temperature and show stable reversibility over 100 h.Experimental measurements and theoretical calculations demonstrate that low-ISA Cs+doping accelerates the reaction kinetics of both oxygen ions and protons,while high-ISA Nb^(5+)doping enhances electrode stability.The synergistic effect of Cs^(+)and Nb^(5+)co-doping in the BSCCFN electrode lies in the ISA polarization distribution,which weakens the Co/Fe–O bond covalency,thereby promoting oxygen vacancy formation and facilitating the conduction of oxygen ions and protons.
文摘Additive Manufacturing,also known as 3D printing,has transformed conventional manufacturing by building objects layer by layer,with material extrusion or fused deposition modeling standing out as particularly popular.However,due to its manufacturing process and thermal nature,internal voids and pores are formed within the thermoplastic materials being fabricated,potentially leading to a decrease in mechanical properties.This paper discussed the effect of printing parameters on the porosity and the mechanical properties of the 3D printed polylactic acid(PLA)through micro-computed tomography(microCT),computational image analysis,and Charpy impact testing.The results for both tests were correlated to investigate the relationship between porosity and Charpy impact strength.PLA samples of 1 cm^(3)×1 cm^(3)×1 cm^(3) were 3D printed at printing temperatures of 180℃,200℃,220℃,and 240℃,and at printing speeds of 50,80,and 110 mm/s,while porosity was measured frommicroCT-reconstructed data.Additionally,impact strength was assessed using a notched Charpy impact tester following ASTMD6610-18.In general,results show that higher printing temperatures and lower printing speeds reduced pore size by improving material flow and fusion,while also increasing impact strength due to better thermal bonding and interlayer adhesion.A maximum 36.8% reduction in mean pore size and a 114% improvement in impact strength were observed at 110 mm/s and 220℃.Conversely,increasing printing speed led to lowerCharpy impact strength.Optimal impact behavior andminimal voids were observed at a printing temperature of 220℃ and a printing speed of 50 mm/s.
基金support from the National Natural Science Foundation of China(Grant Nos.42107193,42077245)supported by the Sichuan Science and Technology Program(2025YFNH0008,2025YFNH0004)+1 种基金the State Key Laboratory of Geohazard Prevention and Geoenvironment Protection Independent Research Project(SKLGP2023Z006)the Everest Scientific Research Program 2.0:Research on mechanism and control of glacial lake outburst chain catastrophe in Qinghai-Xizang Plateau based on man-earth coordination perspective.
文摘To investigate the strength degradation characteristics and microscopic damage mechanisms of moraine soil under hydro-thermo-mechanical coupling conditions,a series of X-ray Diffraction(XRD),standard triaxial testing,Scanning Electron Microscopy(SEM),and Nuclear Magnetic Resonance(NMR)experiments were conducted.The mechanical property degradation laws and evolution characteristics of the microscopic pore structure of moraine soil under Freeze-Thaw(F-T)conditions were revealed.After F-T cycles,the stress-strain curves of moraine soil showed a strain-softening trend.In the early stage of F-T cycles(0–5 cycles),the shear strength and elastic modulus exhibited damage rate of approximately 10.33%±0.8%and 16.60%±1.2%,respectively.In the later stage(10–20 cycles),the strength parameters fluctuated slightly and tended to stabilize.The number of F-T cycles was negatively exponentially correlated with cohesion,while showing only slight fluctuation in the internal friction angle,thereby extending the Mohr-Coulomb strength criterion for moraine soil under F-T cycles.The NMR experiments quantitatively characterized the evolution of the internal pore structure of moraine soil under F-T cycles.As the number of F-T cycles increased,fine and micro pores gradually expanded and merged due to the frost-heaving effect during the water-ice phase transition,forming larger pores.The proportion of large and medium pores increased to 59.55%±2.1%(N=20),while that of fine and micro pores decreased to 40.45%±2.1%(N=20).The evolution of pore structure characteristics was essentially completed in the later stage of F-T cycles(10–20 cycles).This study provides a theoretical foundation and technical support for major engineering construction and disaster prevention in the Qinghai-Xizang Plateau.
