A novel silver-based dihydric alcohol extractant was substituted for ionic liquids to enrich methyl linolenate(C18-3)from tallow seed oil methyl ester in this study.The interactions among dihydric alcohol,Ag(I)and C18...A novel silver-based dihydric alcohol extractant was substituted for ionic liquids to enrich methyl linolenate(C18-3)from tallow seed oil methyl ester in this study.The interactions among dihydric alcohol,Ag(I)and C18-3 were explored by FT-IR spectroscopy.The effects of dihydric alcohol structure,carrier Ag(I)concentration,temperature and initial feed concentration on extraction yield and selectivity were reported.The good extraction performance was achieved by 1,4-butanediol containing AgBF4.The complexation of Ag(I)with C18-3 was dominant in extraction operation rather than physical partition.Furthermore,a multi-step reverse extraction method was proposed to obtain C18-3 product and regenerate the extractant.1-Hexene as the stripping phase can facilitate C18-3 reverse extraction.The content of C18-3 in the product was up to 93.36%,and the yield was 73.76%.This work opened a new route for the utilization of the dihydric alcohol properties to manipulate the carrier efficiency for extracting unsaturated fatty acid methyl esters at a lower cost.展开更多
Teicoplanin is one of the macrocyclic glycopeptide antibiotics, which is active against Gram-positive bacteria, and has attracted a lot of attention in the field of chiral separation recently. In this work, the partit...Teicoplanin is one of the macrocyclic glycopeptide antibiotics, which is active against Gram-positive bacteria, and has attracted a lot of attention in the field of chiral separation recently. In this work, the partition coefficients and extraction ratio of teicoplanin in three different solvent systems were studied: conventional extraction, reactive extraction and reverse micelle extraction. With conventional solvent extraction, n-butanol demonstrated high partition coefficient for teicoplanin, but low extraction ratio because of its high solubility in water. Reactive extraction of teicoplanin showed the highest partition coefficient with almost 100% recovery in organic phase when tri-n-octylmethyl ammonium chloride (TOMAC) was used as extractant and pH value was above 5.0. A reverse micelle system, consisted of isooctane +10mmol-L-1 TOMAC +1% n-octanol, also offered high separation factor for teicoplanin. The results are beneficial for the design of teicoplanin separation and purification process.展开更多
A new method of extraction of blend surface feature is presented. It contains two steps: segmentation and recovery of parametric representation of the blend. The segmentation separates the points in the blend region f...A new method of extraction of blend surface feature is presented. It contains two steps: segmentation and recovery of parametric representation of the blend. The segmentation separates the points in the blend region from the rest of the input point cloud with the processes of sampling point data, estimation of local surface curvature properties and comparison of maximum curvature values. The recovery of parametric representation generates a set of profile curves by marching throughout the blend and fitting cylinders. Compared with the existing approaches of blend surface feature extraction, the proposed method reduces the requirement of user interaction and is capable of extracting blend surface with either constant radius or variable radius. Application examples are presented to verify the proposed method.展开更多
A principal direction Gaussian image （PDGI）-based algorithm is proposed to extract the regular swept surface from point cloud. Firstly, the PDGI of the regular swept surface is constructed from point cloud, then the...A principal direction Gaussian image （PDGI）-based algorithm is proposed to extract the regular swept surface from point cloud. Firstly, the PDGI of the regular swept surface is constructed from point cloud, then the bounding box of the Gaussian sphere is uniformly partitioned into a number of small cubes （3D grids） and the PDGI points on the Gaussian sphere are associated with the corresponding 3D grids. Secondly, cluster analysis technique is used to sort out a group of 3D grids containing more PDGI points among the 3D grids. By the connected-region growing algorithm, the congregation point or the great circle is detected from the 3D grids. Thus the translational direction is determined by the congregation point and the direction of the rotational axis is determined by the great circle. In addition, the positional point of the rotational axis is obtained by the intersection of all the projected normal lines of the rotational surface on the plane being perpendicular to the estimated direction of the rotational axis. Finally, a pattem search method is applied to optimize the translational direction and the rotational axis. Some experiments are used to illustrate the feasibility of the above algorithm.展开更多
基金supported by the National Natural Science Foundation of China(2014AA022103)the Zhejiang Province Public Welfare Technology Application Research Project(LGG20B060003)。
文摘A novel silver-based dihydric alcohol extractant was substituted for ionic liquids to enrich methyl linolenate(C18-3)from tallow seed oil methyl ester in this study.The interactions among dihydric alcohol,Ag(I)and C18-3 were explored by FT-IR spectroscopy.The effects of dihydric alcohol structure,carrier Ag(I)concentration,temperature and initial feed concentration on extraction yield and selectivity were reported.The good extraction performance was achieved by 1,4-butanediol containing AgBF4.The complexation of Ag(I)with C18-3 was dominant in extraction operation rather than physical partition.Furthermore,a multi-step reverse extraction method was proposed to obtain C18-3 product and regenerate the extractant.1-Hexene as the stripping phase can facilitate C18-3 reverse extraction.The content of C18-3 in the product was up to 93.36%,and the yield was 73.76%.This work opened a new route for the utilization of the dihydric alcohol properties to manipulate the carrier efficiency for extracting unsaturated fatty acid methyl esters at a lower cost.
文摘Teicoplanin is one of the macrocyclic glycopeptide antibiotics, which is active against Gram-positive bacteria, and has attracted a lot of attention in the field of chiral separation recently. In this work, the partition coefficients and extraction ratio of teicoplanin in three different solvent systems were studied: conventional extraction, reactive extraction and reverse micelle extraction. With conventional solvent extraction, n-butanol demonstrated high partition coefficient for teicoplanin, but low extraction ratio because of its high solubility in water. Reactive extraction of teicoplanin showed the highest partition coefficient with almost 100% recovery in organic phase when tri-n-octylmethyl ammonium chloride (TOMAC) was used as extractant and pH value was above 5.0. A reverse micelle system, consisted of isooctane +10mmol-L-1 TOMAC +1% n-octanol, also offered high separation factor for teicoplanin. The results are beneficial for the design of teicoplanin separation and purification process.
基金This project is supported by General Electric Corporate ResearchDevelopment and National Advanced Technology Project of China (No.863-511-942-018).
文摘A new method of extraction of blend surface feature is presented. It contains two steps: segmentation and recovery of parametric representation of the blend. The segmentation separates the points in the blend region from the rest of the input point cloud with the processes of sampling point data, estimation of local surface curvature properties and comparison of maximum curvature values. The recovery of parametric representation generates a set of profile curves by marching throughout the blend and fitting cylinders. Compared with the existing approaches of blend surface feature extraction, the proposed method reduces the requirement of user interaction and is capable of extracting blend surface with either constant radius or variable radius. Application examples are presented to verify the proposed method.
基金This project is supported by Key Program of National Natural Science Foundation of China(No.50435020).
文摘A principal direction Gaussian image （PDGI）-based algorithm is proposed to extract the regular swept surface from point cloud. Firstly, the PDGI of the regular swept surface is constructed from point cloud, then the bounding box of the Gaussian sphere is uniformly partitioned into a number of small cubes （3D grids） and the PDGI points on the Gaussian sphere are associated with the corresponding 3D grids. Secondly, cluster analysis technique is used to sort out a group of 3D grids containing more PDGI points among the 3D grids. By the connected-region growing algorithm, the congregation point or the great circle is detected from the 3D grids. Thus the translational direction is determined by the congregation point and the direction of the rotational axis is determined by the great circle. In addition, the positional point of the rotational axis is obtained by the intersection of all the projected normal lines of the rotational surface on the plane being perpendicular to the estimated direction of the rotational axis. Finally, a pattem search method is applied to optimize the translational direction and the rotational axis. Some experiments are used to illustrate the feasibility of the above algorithm.
