Background:Restrained eating,often motivated by the desire to control weight,is prevalent among young female college students and is considered a risk factor for eating disorders.Negative evaluation fear,exacerbated b...Background:Restrained eating,often motivated by the desire to control weight,is prevalent among young female college students and is considered a risk factor for eating disorders.Negative evaluation fear,exacerbated by social pressure,peer comparison,and academic stress,has been identified as a potential contributor to restrained eating behavior.However,research exploring the relationship between negative evaluation fear and restrained eating,particularly in the context of self-esteem and physical appearance perfectionism,remains limited.This study aims to investigate these relationships and design an intervention program to reduce restrained eating behaviors in female college students.Methods:Study 1 involved 617 female college students,using the Physical Appearance Perfectionism Scale,Rosenberg Self-Esteem Scale,Fear of Negative Evaluation Scale,and Dutch Eating Behavior Questionnaire to measure key variables.We examined the relationships between physical appearance perfectionism,self-esteem,fear of negative evaluation,and restrained eating.In Study 2,a 4-week group psychological intervention based on Acceptance and Commitment Therapy(ACT)was implemented with 45 students,divided into experimental,control,and placebo groups.The intervention’s effectiveness was assessed in reducing restrained eating and negative evaluation fear.Results:The study found that fear of negative evaluation significantly predicted restrained eating and physical appearance perfectionism.Physical appearance perfectionism,in turn,positively predicted restrained eating and partially mediated the relationship between negative evaluation fear and restrained eating.Self-esteem moderated this mediation effect.Additionally,the ACT-based intervention significantly reduced fear of negative evaluation and restrained eating behavior in the experimental group.Conclusion:This study identifies fear of negative evaluation and physical appearance perfectionism as key predictors of restrained eating in female college students.Fear of negative evaluation significantly predicted restrained eating,with physical appearance perfectionism partially mediating this relationship.The ACT-based intervention effectively reduced both fear of negative evaluation and restrained eating.These findings highlight the importance of addressing negative evaluation fear and appearance perfectionism in interventions for restrained eating.展开更多
The stability and ductility of four buckling-restrained braces (BRBs) with brace joints were studied. The load-carrying element of BRB was fabricated with steel (Chinese Q235), and a layer of colloidal silica sheet (0...The stability and ductility of four buckling-restrained braces (BRBs) with brace joints were studied. The load-carrying element of BRB was fabricated with steel (Chinese Q235), and a layer of colloidal silica sheet (0.5 mm in thickness) or four layers of plastic film (0.2 mm in thickness) were used as unbonding materials to provide space to prevent the buckling of inner core in higher modes and facilitate its lateral expansion in case of compression. Based on the equation of BRBs with brace joints of different restrained stiffnesses, the buckling load is calculated considering the initial geometric imperfections and residual stress, and the theoretical values agree well with the experiment results. It is concluded that the buckling load and ductility of BRBs are influenced greatly by the restrained stiffness of brace joints. If the restrained stiffness is deficient, the unstrained segment of BRBs with less stiffness will buckle firstly. As a result, the ultimate load of BRBs decreases, and the maximum compression load is reduced to about 65% of the maximum tension load; the stiffness also degenerates, and there is a long decreasing stage on the back-bone curve in compression phase; the ductility decreases, i.e., the ultimate tension ductility and ultimate compression ductility are approximately 15 and 1.3 respectively, and the cumulative plastic ductility is only approximately 200. If the restrained stiffness of joint is large enough, the stability will be improved as follows: the yielding strength and ultimate strength of BRBs are nearly the same, and there is an obvious strain intensification in both tension and compression phases; the ductility of brace also increases obviously, i.e., the ultimate tension ductility and ultimate compression ductility are both approximately 14, and the cumulative plastic ductility reaches 782.展开更多
Buckling restrained braces （BRBs） have been widely applied in seismic mitigation since they were introduced in the 1970s. However, traditional BRBs have several disadvantages caused by using a steel tube to envelope...Buckling restrained braces （BRBs） have been widely applied in seismic mitigation since they were introduced in the 1970s. However, traditional BRBs have several disadvantages caused by using a steel tube to envelope the mortar to prevent the core plate from buckling, such as： complex interfaces between the materials used, uncertain precision, and time consumption during the manufacturing processes. In this study, a new device called the multi-curve buckling restrained brace （MC-BRB） is proposed to overcome these disadvantages. The new device consists of a core plate with multiple neck portions assembled to form multiple energy dissipation segments, and the enlarged segment, lateral support elements and constraining elements to prevent the BRB from buckling. The enlarged segment located in the middle of the core plate can be welded to the lateral support and constraining elements to increase buckling resistance and to prevent them from sliding during earthquakes. Component tests and a series of shaking table tests on a full-scale steel structure equipped with MC-BRBs were carried out to investigate the behavior and capability of this new BRB design for seismic mitigation. The experimental results illustrate that the MC-BRB possesses a stable mechanical behavior under cyclic loadings and provides good protection to structures during earthquakes. Also, a mathematical model has been developed to simulate the mechanical characteristics of BRBs.展开更多
A first-order torsion theory based on Vlasov theory has been developed to investigate the restrained torsion of open thin-walled beams. The total rotation of the cross section is divided into a free warping rotation a...A first-order torsion theory based on Vlasov theory has been developed to investigate the restrained torsion of open thin-walled beams. The total rotation of the cross section is divided into a free warping rotation and a restrained shear rotation. In first-order torsion theory, St. Venant torque is only related to the free warping rotation and the expression of St. Venant torque is derived by using a semi-inverse method. The relationship between the warping torque and the restrained shear rotation is established by using an energy method. The torsion shear coefficient is then obtained. On the basis of the torsion equilibrium, the governing differential equation of the restrained torsion is derived and the corresponding initial method is given to solve the equation. The relationship between total rotation and flee warping rotation is obtained. A parameter λ, which is associated with the stiffness property of a cross section and the beam length, is introduced to determine the condition, under which the St. Venant constant is negligible. Consequently a simplified theory is derived. Numerical examples are illustrated to validate the current approach and the results of the current theory are compared with those of some other available methods. The results of comparison show that the current theory provides more accurate results, In the example of a channel-shaped cantilever beam, the applicability of the simplified theory is determined by the parameter study of λ.展开更多
In this paper,the nonlinear parametric vibration of fluid-conveying pipes flexibly restrained at both ends and subjected to the pulsation flow excitation is investigated.The nonlinear equation of motion is derived usi...In this paper,the nonlinear parametric vibration of fluid-conveying pipes flexibly restrained at both ends and subjected to the pulsation flow excitation is investigated.The nonlinear equation of motion is derived using Hamilton^principle by considering the Kevin-Voigt viscoelastic damping,the geometric nonlinearity and the translational and rotational springs supported at the ends.The mode functions and eigen-frequencies are determined by the assumed mode method according to the elastic boundary conditions.The Galerkin method is implemented to obtain the natural frequencies and mode shapes of the pipe conveying fluid with different flow velocities.The effects of flexibly restrained conditions on stability of the pipe are analyzed.The nonlinear responses of the pipe under pulsating flow excitation are solved by the direct numerical method.The vibration behaviors are discussed in details,such as time history,frequency spectrum,phase-plane portrait,Poincare map and motion trajectory.The results show that the responses of sub-harmonic resonance and combination resonance can also be reflected in the rigidly supported pipes.The 1/5,1/8 and 1/13 sub-harmonic resonances can occur at certain excitation frequencies of the nonlinear parametric vibration system.The steady-state response amplitudes increase by a large margin and significantly affect the stability of the pipe.The effects of different spring stiffness coefficients on the parametric resonance responses are presented.For larger translational springs and rotational stiffness coefficients,the resonance frequencies shift to higher regions and the resonance amplitudes may reduce by a certain extent in accordance with the rigid-body motion.This study can provide helpful guidance on the analysis and design of piping systems subject to vibrations.展开更多
Steel frames equipped with buckling restrained braces(BRBs)have been increasingly applied in earthquake-prone areas given their excellent capacity for resisting lateral forces.Therefore,special attention has been paid...Steel frames equipped with buckling restrained braces(BRBs)have been increasingly applied in earthquake-prone areas given their excellent capacity for resisting lateral forces.Therefore,special attention has been paid to the seismic risk assessment(SRA)of such structures,e.g.,seismic fragility analysis.Conventional approaches,e.g.,nonlinear finite element simulation(NFES),are computationally inefficient for SRA analysis particularly for large-scale steel BRB frame structures.In this study,amachine learning(ML)-based seismic fragility analysis framework is established to effectively assess the risk to structures under seismic loading conditions.An optimal artificial neural network model can be trained using calculated damage and intensity measures,a technique which will be used to compute the fragility curves of a steel BRB frame instead of employing NFES.Numerical results show that a highly efficient instantaneous failure probability assessment can be made with the proposed framework for realistic large-scale building structures.展开更多
High-performance concrete （HPC） is stronger and more durable than conventional concrete. However, shrinkage and shrinkage cracking are common phenomena in HPC, especially early-age cracking. This study assessed earl...High-performance concrete （HPC） is stronger and more durable than conventional concrete. However, shrinkage and shrinkage cracking are common phenomena in HPC, especially early-age cracking. This study assessed early-age cracking of HPC for two mixtures using restrained ring tests. The two mixtures were produced with water/binder mass ratio （mw/mB） of 0.22 and 0.40, respectively. The results show that, with greater steel thickness, the higher degree of restraint resulted in a higher interface pressure and earlier cracking. With steel thickness of 6 mm, 19 mm, and 30 mm, the age of cracking were, respectively, 12 days, 8 days, and 5.4 days with the mw/mB = 0.22 mixture; and 22.5 days, 12.6 days, and 7.1 days with the mw/mB= 0.40 mixture. Cases of the same steel thickness show that the ring specimens with a thicker concrete wall crack later. With the mw/mB = 0.22 mixture, concrete walls with thicknesses of 37.5 mm, 75 mm, and 112.5 mm cracked at 3.4 days, 8.0 days, and 9.8 days, respectively; with the mw/mB = 0.40 mixture, the ages of cracking were 7.1 days, 12.6 days, and 16.0 days, respectively.展开更多
Our preliminary study demonstrated that neuropeptide Y （NPY）/nestin-positive cells exhibit a consistent spatial distribution in the hippocampus of normal adult rats. However, following severe acute and chronic stres...Our preliminary study demonstrated that neuropeptide Y （NPY）/nestin-positive cells exhibit a consistent spatial distribution in the hippocampus of normal adult rats. However, following severe acute and chronic stress-induced impaired learning and memory, synchronous decreased expression of nestin and NPY takes place in the hippocampus, and the underlying mechanisms remain unclear. In the present study, acute and chronic stress rat models were established using combined restrained and inverted stress. Results showed that learning and memory significantly decreased in acute and chronic stress rats. In addition, hippocampal cells were damaged, in particular in the acute stress rats, and nestin and NPY expression, as well as the number of NPY/nestin-positive cells in the CA3 region, significantly decreased. Furthermore, mature neurofilament 200-positive neurons were absent in the chronic stress rats. The NPY and cytoskeletal protein system equally contributed to stress-induced early learning and memory deficits as well as sustained cerebral iniurv in the adult hippocampus.展开更多
This paper addresses the free transverse vibrations of thin simply supported nonhomogeneous isotropic rectangular plates of bilinearly varying thickness with elastically restrained edges against rotation. The Gram-Sch...This paper addresses the free transverse vibrations of thin simply supported nonhomogeneous isotropic rectangular plates of bilinearly varying thickness with elastically restrained edges against rotation. The Gram-Schmidt process has been used to generate two-dimensional boundary characteristic orthogonal polynomials, which have been used in the Rayleigh-Ritz method to study the problem. The lowest three frequencies have been computed for various values of nonhomogeneous parameters, thickness parameters, aspect ratio and flexibility parameters. A comparison of the results with those available in the literature has been made. Three-dimensional mode shapes for the specified plate have been presented.展开更多
An image segmentation algorithm of the restrained fuzzy Kohonen clustering network （RFKCN） based on high- dimension fuzzy character is proposed. The algorithm includes two steps. The first step is the fuzzification ...An image segmentation algorithm of the restrained fuzzy Kohonen clustering network （RFKCN） based on high- dimension fuzzy character is proposed. The algorithm includes two steps. The first step is the fuzzification of pixels in which two redundant images are built by fuzzy mean value and fuzzy median value. The second step is to construct a three-dimensional （3-D） feature vector of redundant images and their original images and cluster the feature vector through RFKCN, to realize image seg- mentation. The proposed algorithm fully takes into account not only gray distribution information of pixels, but also relevant information and fuzzy information among neighboring pixels in constructing 3- D character space. Based on the combination of competitiveness, redundancy and complementary of the information, the proposed algorithm improves the accuracy of clustering. Theoretical anal- yses and experimental results demonstrate that the proposed algorithm has a good segmentation performance.展开更多
The changing law of internal forces during the whole deformation development process was analyzed. The process was divided into five stages based on the internal force state of the beam and the assumptions of internal...The changing law of internal forces during the whole deformation development process was analyzed. The process was divided into five stages based on the internal force state of the beam and the assumptions of internal force relationship of five stages were proposed. Then, the formulas for determining the midspan deflection of the steel beam under distributed load, which was restrained both in rotational and axial directions, were obtained using restraint coefficient method and rigid-plastic mechanism, thereby the deformation development process was expressed accurately in a quantified way. Priority was given to the analysis of the process from bending to tension-bending, then the final state totally depends on tension to resist the external loads, that is the problem of catenary action of the restrained beam under distributed load. Additionally, finite element analysis was carried out with soitware ABAQUS6.7 on a restrained steel beam under distributed load with different axial and rotational restraint coefficients. The accuracy of the formulas presented was verified by the results of the behavior of the restrained beams. Finally, error analysis was conducted and some formulas were corrected according to the reasons of errors. The calculated results of corrected formulas match the FEM analysis results better, thus the accuracy of these formulas is improve .展开更多
To investigate the early-age behaviors of concrete under a restrained condition, a set of apparatus was developed. In this way, the tensile creep and other early-age properties can be investigated in depth. By measuri...To investigate the early-age behaviors of concrete under a restrained condition, a set of apparatus was developed. In this way, the tensile creep and other early-age properties can be investigated in depth. By measuring the modulus of elasticity of concrete, synchronous shrinkage of concrete and steel rings and free shrinkage of concrete, the deformations of concrete ring can be quantified respectively. The experimental results show the tensile stress in concrete is time-dependent, and the stress at cracking is much lower than the tensile strength at that age; the tensile creep plays an important role in relaxing the tensile stress and postponing the cracking of concrete.展开更多
The element-free Galerkin method is proposed to solve free vibration of rectangular plates with finite interior elastic point supports and elastically restrained edges.Based on the extended Hamilton＇s principle for t...The element-free Galerkin method is proposed to solve free vibration of rectangular plates with finite interior elastic point supports and elastically restrained edges.Based on the extended Hamilton＇s principle for the elastic dynamics system,the dimensionless equations of motion of rectangular plates with finite interior elastic point supports and the edge elastically restrained are established using the element-free Galerkin method.Through numerical calculation,curves of the natural frequency of thin plates with three edges simply supported and one edge elastically restrained,and three edges clamped and the other edge elastically restrained versus the spring constant,locations of elastic point support and the elastic stiffness of edge elastically restrained are obtained.Effects of elastic point supports and edge elastically restrained on the free vibration characteristics of the thin plates are analyzed.展开更多
Hydration process, crack potential and setting time of concrete grade C30, C40 and C50 were monitored by using a non-contact electrical resistivity apparatus, a novel plastic ring mould and penetration resistance meth...Hydration process, crack potential and setting time of concrete grade C30, C40 and C50 were monitored by using a non-contact electrical resistivity apparatus, a novel plastic ring mould and penetration resistance methods, respectively. The results show the highest resistivity of C30 at the early stage until a point when C50 accelerated and overtook the others. It has been experimentally confirmed that the crossing point of C30 and C50 corresponds to the final setting time of C50. From resistivity derivative curve, four different stages were observed upon which the hydration process is classified; these are dissolution, induction, acceleration and deceleration periods. Consequently, restrained shrinkage crack and setting time results demonstrated that C50 set and cracked the earliest. The cracking time of all the samples occurred within a reasonable experimental period thus the novel plastic ring is a convenient method for predicting concrete＇s crack potential. The highest inflection time（t_i） obtained from resistivity curve and the final setting time（t_f） were used with crack time（t_c） in coming up with mathematical models for the prediction of concrete＇s cracking age for the range of concrete grade considered. Finally, an ANSYS numerical simulation supports the experimental findings in terms of the earliest crack age of C50 and the crack location.展开更多
Restrained bending of thin-walled box beam with honeycomb core is analyzed on the basis of rigid profile assumption. The method of variable separation is applied and two ordinary differential governing equations are e...Restrained bending of thin-walled box beam with honeycomb core is analyzed on the basis of rigid profile assumption. The method of variable separation is applied and two ordinary differential governing equations are established and solved. The boundary conditions are satisfied rigorously and the solutions are expressed by means of eigen function expansions. The diagram of shearing force is formulated by trigonometric series and used to determine the coefficients in above expansions. The computational resuits give the chord and span wise distributions of nomal and shear stress in the cover plate and the honeycomb core. At the same time, the attenuation of additional stress from fixed end to free end along the length of beam is shown clearly.展开更多
Restrained torsion of thin-walled box beam with honeycomb core is analyzed on the basis of rigid profile assumption. The method of variable separation is applied and two ordinary differential governing equations are e...Restrained torsion of thin-walled box beam with honeycomb core is analyzed on the basis of rigid profile assumption. The method of variable separation is applied and two ordinary differential governing equations are established and solved. The boundary conditions are satisfied rigorously and the solutions are expressed by means of eigen function expansions. The diagram of torque is formulated by trigonometric series and used to determine the coefficients in above expansions. The results of computation provide the chord-wise and span-wise distributions of normal and shear stress in the face plate along with shear stress in the honeycomb core.展开更多
Based on the background of structural protection and Disaster Reduction Engineering, the dynamic behaviour and failure mechanism of restrained beams in portal steel frames in localised fire are investigated via experi...Based on the background of structural protection and Disaster Reduction Engineering, the dynamic behaviour and failure mechanism of restrained beams in portal steel frames in localised fire are investigated via experimental measurement and numerical simulation techniques. Comprehensive parametric studies are carried out to discuss the influence of end connection types, temperature, impact velocity,impact mass and span-to-depth ratio(SDR) on the dynamic response of the beams. The characteristics of deformation, internal force and energy distribution about the restrained beams and its joints are investigated. A temperature dependent criterion for evaluating the frame joint performance is proposed to measure the degree of performance degradation and impact resistance of the joint. The dynamic displacement amplification factor in different temperature environments are proposed for the different beam end constraint types and SDRs. Results of the experimental and numerical analysis show that the welded connection(WC) of three typical joint types is the strongest, and the extended endplate connection(EEC) is the weakest in terms of the impact resistance performance. With regard to the failure mode of the joint, the failure positions of the WC and the welded-bolted connection are located in the inner web of the column. Meanwhile, the EEC is located in the connection position between the beam and the endplate. Three different internal force stages and two obvious critical temperature boundaries of the restrained beams emerge with the increase in temperature, and they have significant characteristics in terms of deformation trend, internal force transfer and energy distribution. During the impact, a phenomenon known as “compression arch action” develops into “catenary action” with the increase in deflection in the frame beam mechanism.展开更多
An investigation is conducted on the static ultimate limit state assessment of ship hull plates with elastically restrained edges subjected to axial compression.Both material and geometric non-linearities were conside...An investigation is conducted on the static ultimate limit state assessment of ship hull plates with elastically restrained edges subjected to axial compression.Both material and geometric non-linearities were considered in finite element(FE)analysis.The initial geometric imperfection of the plate was considered,while the residual stress introduced by welding was not considered.The ultimate strength of simply supported ship hull plates compared well with the existing empirical formula to validate the correctness of the applied boundary conditions,initial imperfection and mesh size.The extensive FE calculations on the ultimate strength of ship hull plates with elastically restrained edges are presented.Then a new simple empirical formula for plate ultimate strength is developed,which includes the effect of the rotational restraint stiffness,rotational restraint stiffness,and aspect ratios.By applying the new formula and FE method to ship hull plates in real ships,a good coincidence of the results between these two methods is obtained,which indicates that the new formula can accurately predict the ultimate strength of ship hull plates with elastically restrained edges.展开更多
In order to quantify the development of the tensile stresses and obtain a reliable estimation of the cracking risk, the concrete was subjected to restrained conditions. The fully restrained condition was achieved by k...In order to quantify the development of the tensile stresses and obtain a reliable estimation of the cracking risk, the concrete was subjected to restrained conditions. The fully restrained condition was achieved by keeping the length constant of a concrete specimen. Comparing the free shrinkage with the restrained shrinkage, tensile creep could be discriminated from shrinkage. The testing method was introduced in details, and the mechanical behoviors under tensile lond were analyzed. Results show that conerete exhibits a pronounced viscoelasticity. Under restroined condition, the self-induced tensile stress increases with time. The lower the water to cement ratio, the larger the tensile stress at the same age. The tensile creep of hardening concrete is much larger than that of hardened concrete. The relationships among autogenous shrinkage unter free condition, elastic strain and creep under restrained condition are described, and the mathematical model for the calculation of elastic strain and creep is propased.展开更多
For a better understanding of the strains and stresses,numerical simulation was conducted by using ANSYS under the assumption of absolute bond between the steel and concrete.The results show that the stresses and stra...For a better understanding of the strains and stresses,numerical simulation was conducted by using ANSYS under the assumption of absolute bond between the steel and concrete.The results show that the stresses and strains in such concrete and steel rings are uneven;the curves of strains and stresses change gradually around the interface.To ease numerical computation,the mechanical system was simplified under the assumptions of synchronous deformation and uniform strains and stresses.The results of the numerical simulation and simplified stress calculation can match almost perfectly.It means that the simplified mechanical model can be used in stress and visco-elastic behavior quantification.展开更多
文摘Background:Restrained eating,often motivated by the desire to control weight,is prevalent among young female college students and is considered a risk factor for eating disorders.Negative evaluation fear,exacerbated by social pressure,peer comparison,and academic stress,has been identified as a potential contributor to restrained eating behavior.However,research exploring the relationship between negative evaluation fear and restrained eating,particularly in the context of self-esteem and physical appearance perfectionism,remains limited.This study aims to investigate these relationships and design an intervention program to reduce restrained eating behaviors in female college students.Methods:Study 1 involved 617 female college students,using the Physical Appearance Perfectionism Scale,Rosenberg Self-Esteem Scale,Fear of Negative Evaluation Scale,and Dutch Eating Behavior Questionnaire to measure key variables.We examined the relationships between physical appearance perfectionism,self-esteem,fear of negative evaluation,and restrained eating.In Study 2,a 4-week group psychological intervention based on Acceptance and Commitment Therapy(ACT)was implemented with 45 students,divided into experimental,control,and placebo groups.The intervention’s effectiveness was assessed in reducing restrained eating and negative evaluation fear.Results:The study found that fear of negative evaluation significantly predicted restrained eating and physical appearance perfectionism.Physical appearance perfectionism,in turn,positively predicted restrained eating and partially mediated the relationship between negative evaluation fear and restrained eating.Self-esteem moderated this mediation effect.Additionally,the ACT-based intervention significantly reduced fear of negative evaluation and restrained eating behavior in the experimental group.Conclusion:This study identifies fear of negative evaluation and physical appearance perfectionism as key predictors of restrained eating in female college students.Fear of negative evaluation significantly predicted restrained eating,with physical appearance perfectionism partially mediating this relationship.The ACT-based intervention effectively reduced both fear of negative evaluation and restrained eating.These findings highlight the importance of addressing negative evaluation fear and appearance perfectionism in interventions for restrained eating.
基金Supported by the "Eleventh Five-Year Plan" for Science and Technology Research of China (No. 2006BAJ01B02-02-03)Natural Science Foundation of Heilongjiang Province (No. ZJG0701)+1 种基金National Natural Science Foundation of China (No. 90715021, No. 50678057, No. 50978080)Natural Scientific Research Innovation Foundation of Harbin Institute of Technology (No. HIT. NSRIF. 2009)
文摘The stability and ductility of four buckling-restrained braces (BRBs) with brace joints were studied. The load-carrying element of BRB was fabricated with steel (Chinese Q235), and a layer of colloidal silica sheet (0.5 mm in thickness) or four layers of plastic film (0.2 mm in thickness) were used as unbonding materials to provide space to prevent the buckling of inner core in higher modes and facilitate its lateral expansion in case of compression. Based on the equation of BRBs with brace joints of different restrained stiffnesses, the buckling load is calculated considering the initial geometric imperfections and residual stress, and the theoretical values agree well with the experiment results. It is concluded that the buckling load and ductility of BRBs are influenced greatly by the restrained stiffness of brace joints. If the restrained stiffness is deficient, the unstrained segment of BRBs with less stiffness will buckle firstly. As a result, the ultimate load of BRBs decreases, and the maximum compression load is reduced to about 65% of the maximum tension load; the stiffness also degenerates, and there is a long decreasing stage on the back-bone curve in compression phase; the ductility decreases, i.e., the ultimate tension ductility and ultimate compression ductility are approximately 15 and 1.3 respectively, and the cumulative plastic ductility is only approximately 200. If the restrained stiffness of joint is large enough, the stability will be improved as follows: the yielding strength and ultimate strength of BRBs are nearly the same, and there is an obvious strain intensification in both tension and compression phases; the ductility of brace also increases obviously, i.e., the ultimate tension ductility and ultimate compression ductility are both approximately 14, and the cumulative plastic ductility reaches 782.
基金Science Council in Chinese Taipei Under Grant No.NSC 94-2211-E-035-015
文摘Buckling restrained braces （BRBs） have been widely applied in seismic mitigation since they were introduced in the 1970s. However, traditional BRBs have several disadvantages caused by using a steel tube to envelope the mortar to prevent the core plate from buckling, such as： complex interfaces between the materials used, uncertain precision, and time consumption during the manufacturing processes. In this study, a new device called the multi-curve buckling restrained brace （MC-BRB） is proposed to overcome these disadvantages. The new device consists of a core plate with multiple neck portions assembled to form multiple energy dissipation segments, and the enlarged segment, lateral support elements and constraining elements to prevent the BRB from buckling. The enlarged segment located in the middle of the core plate can be welded to the lateral support and constraining elements to increase buckling resistance and to prevent them from sliding during earthquakes. Component tests and a series of shaking table tests on a full-scale steel structure equipped with MC-BRBs were carried out to investigate the behavior and capability of this new BRB design for seismic mitigation. The experimental results illustrate that the MC-BRB possesses a stable mechanical behavior under cyclic loadings and provides good protection to structures during earthquakes. Also, a mathematical model has been developed to simulate the mechanical characteristics of BRBs.
基金Project (No. 072012028) supported by the Science and Technology Commission of Shanghai Municipality, China
文摘A first-order torsion theory based on Vlasov theory has been developed to investigate the restrained torsion of open thin-walled beams. The total rotation of the cross section is divided into a free warping rotation and a restrained shear rotation. In first-order torsion theory, St. Venant torque is only related to the free warping rotation and the expression of St. Venant torque is derived by using a semi-inverse method. The relationship between the warping torque and the restrained shear rotation is established by using an energy method. The torsion shear coefficient is then obtained. On the basis of the torsion equilibrium, the governing differential equation of the restrained torsion is derived and the corresponding initial method is given to solve the equation. The relationship between total rotation and flee warping rotation is obtained. A parameter λ, which is associated with the stiffness property of a cross section and the beam length, is introduced to determine the condition, under which the St. Venant constant is negligible. Consequently a simplified theory is derived. Numerical examples are illustrated to validate the current approach and the results of the current theory are compared with those of some other available methods. The results of comparison show that the current theory provides more accurate results, In the example of a channel-shaped cantilever beam, the applicability of the simplified theory is determined by the parameter study of λ.
基金the National Natural Science Foundation of China(Grant No.51305350,Grant No.11802235)National Key Basic Research Program of China(Grant No.613268)Aeronautics Power Foundation Program of China(Grant No.6141B090320).
文摘In this paper,the nonlinear parametric vibration of fluid-conveying pipes flexibly restrained at both ends and subjected to the pulsation flow excitation is investigated.The nonlinear equation of motion is derived using Hamilton^principle by considering the Kevin-Voigt viscoelastic damping,the geometric nonlinearity and the translational and rotational springs supported at the ends.The mode functions and eigen-frequencies are determined by the assumed mode method according to the elastic boundary conditions.The Galerkin method is implemented to obtain the natural frequencies and mode shapes of the pipe conveying fluid with different flow velocities.The effects of flexibly restrained conditions on stability of the pipe are analyzed.The nonlinear responses of the pipe under pulsating flow excitation are solved by the direct numerical method.The vibration behaviors are discussed in details,such as time history,frequency spectrum,phase-plane portrait,Poincare map and motion trajectory.The results show that the responses of sub-harmonic resonance and combination resonance can also be reflected in the rigidly supported pipes.The 1/5,1/8 and 1/13 sub-harmonic resonances can occur at certain excitation frequencies of the nonlinear parametric vibration system.The steady-state response amplitudes increase by a large margin and significantly affect the stability of the pipe.The effects of different spring stiffness coefficients on the parametric resonance responses are presented.For larger translational springs and rotational stiffness coefficients,the resonance frequencies shift to higher regions and the resonance amplitudes may reduce by a certain extent in accordance with the rigid-body motion.This study can provide helpful guidance on the analysis and design of piping systems subject to vibrations.
基金Financial support received from the Scientific Research Fund of Institute of Engineering Mechanics,China Earthquake Administration under Grant No.2019EEEVL05the National Key Research and Development Program of China under Grant No.2016YFC0701106the National Natural Science Foundation of China under Grant No.51578473 are gratefully acknowledged.
文摘Steel frames equipped with buckling restrained braces(BRBs)have been increasingly applied in earthquake-prone areas given their excellent capacity for resisting lateral forces.Therefore,special attention has been paid to the seismic risk assessment(SRA)of such structures,e.g.,seismic fragility analysis.Conventional approaches,e.g.,nonlinear finite element simulation(NFES),are computationally inefficient for SRA analysis particularly for large-scale steel BRB frame structures.In this study,amachine learning(ML)-based seismic fragility analysis framework is established to effectively assess the risk to structures under seismic loading conditions.An optimal artificial neural network model can be trained using calculated damage and intensity measures,a technique which will be used to compute the fragility curves of a steel BRB frame instead of employing NFES.Numerical results show that a highly efficient instantaneous failure probability assessment can be made with the proposed framework for realistic large-scale building structures.
文摘High-performance concrete （HPC） is stronger and more durable than conventional concrete. However, shrinkage and shrinkage cracking are common phenomena in HPC, especially early-age cracking. This study assessed early-age cracking of HPC for two mixtures using restrained ring tests. The two mixtures were produced with water/binder mass ratio （mw/mB） of 0.22 and 0.40, respectively. The results show that, with greater steel thickness, the higher degree of restraint resulted in a higher interface pressure and earlier cracking. With steel thickness of 6 mm, 19 mm, and 30 mm, the age of cracking were, respectively, 12 days, 8 days, and 5.4 days with the mw/mB = 0.22 mixture; and 22.5 days, 12.6 days, and 7.1 days with the mw/mB= 0.40 mixture. Cases of the same steel thickness show that the ring specimens with a thicker concrete wall crack later. With the mw/mB = 0.22 mixture, concrete walls with thicknesses of 37.5 mm, 75 mm, and 112.5 mm cracked at 3.4 days, 8.0 days, and 9.8 days, respectively; with the mw/mB = 0.40 mixture, the ages of cracking were 7.1 days, 12.6 days, and 16.0 days, respectively.
基金the Natural Science Research Project from Bureau of Public Health of Sichuan Province,No. 090194the Natural Science Research Project of Science Technology Bureau of Luzhou,No. 090102
文摘Our preliminary study demonstrated that neuropeptide Y （NPY）/nestin-positive cells exhibit a consistent spatial distribution in the hippocampus of normal adult rats. However, following severe acute and chronic stress-induced impaired learning and memory, synchronous decreased expression of nestin and NPY takes place in the hippocampus, and the underlying mechanisms remain unclear. In the present study, acute and chronic stress rat models were established using combined restrained and inverted stress. Results showed that learning and memory significantly decreased in acute and chronic stress rats. In addition, hippocampal cells were damaged, in particular in the acute stress rats, and nestin and NPY expression, as well as the number of NPY/nestin-positive cells in the CA3 region, significantly decreased. Furthermore, mature neurofilament 200-positive neurons were absent in the chronic stress rats. The NPY and cytoskeletal protein system equally contributed to stress-induced early learning and memory deficits as well as sustained cerebral iniurv in the adult hippocampus.
文摘This paper addresses the free transverse vibrations of thin simply supported nonhomogeneous isotropic rectangular plates of bilinearly varying thickness with elastically restrained edges against rotation. The Gram-Schmidt process has been used to generate two-dimensional boundary characteristic orthogonal polynomials, which have been used in the Rayleigh-Ritz method to study the problem. The lowest three frequencies have been computed for various values of nonhomogeneous parameters, thickness parameters, aspect ratio and flexibility parameters. A comparison of the results with those available in the literature has been made. Three-dimensional mode shapes for the specified plate have been presented.
基金supported by the National Natural Science Foundation of China(61073106)the Aerospace Science and Technology Innovation Fund(CASC201105)
文摘An image segmentation algorithm of the restrained fuzzy Kohonen clustering network （RFKCN） based on high- dimension fuzzy character is proposed. The algorithm includes two steps. The first step is the fuzzification of pixels in which two redundant images are built by fuzzy mean value and fuzzy median value. The second step is to construct a three-dimensional （3-D） feature vector of redundant images and their original images and cluster the feature vector through RFKCN, to realize image seg- mentation. The proposed algorithm fully takes into account not only gray distribution information of pixels, but also relevant information and fuzzy information among neighboring pixels in constructing 3- D character space. Based on the combination of competitiveness, redundancy and complementary of the information, the proposed algorithm improves the accuracy of clustering. Theoretical anal- yses and experimental results demonstrate that the proposed algorithm has a good segmentation performance.
基金Project(2006BAJ01B02)supported by the National Science and Technology Pillar Program during the Eleventh Five-Year Plan Period of China
文摘The changing law of internal forces during the whole deformation development process was analyzed. The process was divided into five stages based on the internal force state of the beam and the assumptions of internal force relationship of five stages were proposed. Then, the formulas for determining the midspan deflection of the steel beam under distributed load, which was restrained both in rotational and axial directions, were obtained using restraint coefficient method and rigid-plastic mechanism, thereby the deformation development process was expressed accurately in a quantified way. Priority was given to the analysis of the process from bending to tension-bending, then the final state totally depends on tension to resist the external loads, that is the problem of catenary action of the restrained beam under distributed load. Additionally, finite element analysis was carried out with soitware ABAQUS6.7 on a restrained steel beam under distributed load with different axial and rotational restraint coefficients. The accuracy of the formulas presented was verified by the results of the behavior of the restrained beams. Finally, error analysis was conducted and some formulas were corrected according to the reasons of errors. The calculated results of corrected formulas match the FEM analysis results better, thus the accuracy of these formulas is improve .
基金the National Natural Science Foundation of China (50678054)
文摘To investigate the early-age behaviors of concrete under a restrained condition, a set of apparatus was developed. In this way, the tensile creep and other early-age properties can be investigated in depth. By measuring the modulus of elasticity of concrete, synchronous shrinkage of concrete and steel rings and free shrinkage of concrete, the deformations of concrete ring can be quantified respectively. The experimental results show the tensile stress in concrete is time-dependent, and the stress at cracking is much lower than the tensile strength at that age; the tensile creep plays an important role in relaxing the tensile stress and postponing the cracking of concrete.
基金Project supported by the National Natural Science Foundation of China (Grant No.10872163)the Natural Science Foundation of Education Department of Shaanxi Province (Grant No.08JK394)
文摘The element-free Galerkin method is proposed to solve free vibration of rectangular plates with finite interior elastic point supports and elastically restrained edges.Based on the extended Hamilton＇s principle for the elastic dynamics system,the dimensionless equations of motion of rectangular plates with finite interior elastic point supports and the edge elastically restrained are established using the element-free Galerkin method.Through numerical calculation,curves of the natural frequency of thin plates with three edges simply supported and one edge elastically restrained,and three edges clamped and the other edge elastically restrained versus the spring constant,locations of elastic point support and the elastic stiffness of edge elastically restrained are obtained.Effects of elastic point supports and edge elastically restrained on the free vibration characteristics of the thin plates are analyzed.
基金Funded by National Natural Science Foundation of China(Nos.51478200 and 51178202)
文摘Hydration process, crack potential and setting time of concrete grade C30, C40 and C50 were monitored by using a non-contact electrical resistivity apparatus, a novel plastic ring mould and penetration resistance methods, respectively. The results show the highest resistivity of C30 at the early stage until a point when C50 accelerated and overtook the others. It has been experimentally confirmed that the crossing point of C30 and C50 corresponds to the final setting time of C50. From resistivity derivative curve, four different stages were observed upon which the hydration process is classified; these are dissolution, induction, acceleration and deceleration periods. Consequently, restrained shrinkage crack and setting time results demonstrated that C50 set and cracked the earliest. The cracking time of all the samples occurred within a reasonable experimental period thus the novel plastic ring is a convenient method for predicting concrete＇s crack potential. The highest inflection time（t_i） obtained from resistivity curve and the final setting time（t_f） were used with crack time（t_c） in coming up with mathematical models for the prediction of concrete＇s cracking age for the range of concrete grade considered. Finally, an ANSYS numerical simulation supports the experimental findings in terms of the earliest crack age of C50 and the crack location.
文摘Restrained bending of thin-walled box beam with honeycomb core is analyzed on the basis of rigid profile assumption. The method of variable separation is applied and two ordinary differential governing equations are established and solved. The boundary conditions are satisfied rigorously and the solutions are expressed by means of eigen function expansions. The diagram of shearing force is formulated by trigonometric series and used to determine the coefficients in above expansions. The computational resuits give the chord and span wise distributions of nomal and shear stress in the cover plate and the honeycomb core. At the same time, the attenuation of additional stress from fixed end to free end along the length of beam is shown clearly.
文摘Restrained torsion of thin-walled box beam with honeycomb core is analyzed on the basis of rigid profile assumption. The method of variable separation is applied and two ordinary differential governing equations are established and solved. The boundary conditions are satisfied rigorously and the solutions are expressed by means of eigen function expansions. The diagram of torque is formulated by trigonometric series and used to determine the coefficients in above expansions. The results of computation provide the chord-wise and span-wise distributions of normal and shear stress in the face plate along with shear stress in the honeycomb core.
基金supported by the National natural Science Foundation of China [grant numbers 12172198, 11272189 and 52078283]Youth Innovation Technology Project of Higher School in Shandong Province [grant number 2019KJG015]。
文摘Based on the background of structural protection and Disaster Reduction Engineering, the dynamic behaviour and failure mechanism of restrained beams in portal steel frames in localised fire are investigated via experimental measurement and numerical simulation techniques. Comprehensive parametric studies are carried out to discuss the influence of end connection types, temperature, impact velocity,impact mass and span-to-depth ratio(SDR) on the dynamic response of the beams. The characteristics of deformation, internal force and energy distribution about the restrained beams and its joints are investigated. A temperature dependent criterion for evaluating the frame joint performance is proposed to measure the degree of performance degradation and impact resistance of the joint. The dynamic displacement amplification factor in different temperature environments are proposed for the different beam end constraint types and SDRs. Results of the experimental and numerical analysis show that the welded connection(WC) of three typical joint types is the strongest, and the extended endplate connection(EEC) is the weakest in terms of the impact resistance performance. With regard to the failure mode of the joint, the failure positions of the WC and the welded-bolted connection are located in the inner web of the column. Meanwhile, the EEC is located in the connection position between the beam and the endplate. Three different internal force stages and two obvious critical temperature boundaries of the restrained beams emerge with the increase in temperature, and they have significant characteristics in terms of deformation trend, internal force transfer and energy distribution. During the impact, a phenomenon known as “compression arch action” develops into “catenary action” with the increase in deflection in the frame beam mechanism.
文摘An investigation is conducted on the static ultimate limit state assessment of ship hull plates with elastically restrained edges subjected to axial compression.Both material and geometric non-linearities were considered in finite element(FE)analysis.The initial geometric imperfection of the plate was considered,while the residual stress introduced by welding was not considered.The ultimate strength of simply supported ship hull plates compared well with the existing empirical formula to validate the correctness of the applied boundary conditions,initial imperfection and mesh size.The extensive FE calculations on the ultimate strength of ship hull plates with elastically restrained edges are presented.Then a new simple empirical formula for plate ultimate strength is developed,which includes the effect of the rotational restraint stiffness,rotational restraint stiffness,and aspect ratios.By applying the new formula and FE method to ship hull plates in real ships,a good coincidence of the results between these two methods is obtained,which indicates that the new formula can accurately predict the ultimate strength of ship hull plates with elastically restrained edges.
文摘In order to quantify the development of the tensile stresses and obtain a reliable estimation of the cracking risk, the concrete was subjected to restrained conditions. The fully restrained condition was achieved by keeping the length constant of a concrete specimen. Comparing the free shrinkage with the restrained shrinkage, tensile creep could be discriminated from shrinkage. The testing method was introduced in details, and the mechanical behoviors under tensile lond were analyzed. Results show that conerete exhibits a pronounced viscoelasticity. Under restroined condition, the self-induced tensile stress increases with time. The lower the water to cement ratio, the larger the tensile stress at the same age. The tensile creep of hardening concrete is much larger than that of hardened concrete. The relationships among autogenous shrinkage unter free condition, elastic strain and creep under restrained condition are described, and the mathematical model for the calculation of elastic strain and creep is propased.
基金Funded by the National Natural Science Foundation of China (No.50678054)
文摘For a better understanding of the strains and stresses,numerical simulation was conducted by using ANSYS under the assumption of absolute bond between the steel and concrete.The results show that the stresses and strains in such concrete and steel rings are uneven;the curves of strains and stresses change gradually around the interface.To ease numerical computation,the mechanical system was simplified under the assumptions of synchronous deformation and uniform strains and stresses.The results of the numerical simulation and simplified stress calculation can match almost perfectly.It means that the simplified mechanical model can be used in stress and visco-elastic behavior quantification.
