Computer programs have definitely become indispensable for designing power transformer. Among several applications, computer programs are mostly used for electric field calculation and thus electrical insulation conce...Computer programs have definitely become indispensable for designing power transformer. Among several applications, computer programs are mostly used for electric field calculation and thus electrical insulation concerns. In consequence, studies based on analytical approach to basic studies of correlated problems have become even more important because they form the very basis of knowledge that is necessary to every transformer designer in view of taking all the advantages of computational analyses. On the other hand, one of the most important basic studies consists in the evaluation of voltage surge distribution along transformer windings for which the method of separation of variables has been extensively used thanks to some simplifying assumptions. With this aim, authors have developed and previously published works that show the applicability of an alternative and useful analytical method that is the method of the residues, which requires no simplification to be assumed. In this work, another important step is taken towards proofing the total applicability of this promising method that is through a practical problem. A comparison to the numerical method TLM （transmission line method） is also performed and concordance with TLM and experimental data confirms the proposal of the method of residues can be also applicable to several others problems of electromagnetism.展开更多
In the aerospace field, residual stress directly affects the strength, fatigue life and dimensional stability of thin-walled structural components, and is a key factor to ensure flight safety and reliability. At prese...In the aerospace field, residual stress directly affects the strength, fatigue life and dimensional stability of thin-walled structural components, and is a key factor to ensure flight safety and reliability. At present, research on residual stress at home and abroad mainly focuses on the optimization of traditional detection technology, stress control of manufacturing process and service performance evaluation, among which research on residual stress detection methods mainly focuses on the improvement of the accuracy, sensitivity, reliability and other performance of existing detection methods, but it still faces many challenges such as extremely small detection range, low efficiency, large error and limited application range.展开更多
The semi? analytic perturbation weighted residuals method was used to solve the nonlinear bending problem of shallow shells, and the fifth order B spline was taken as trial function to seek an efficient method for n...The semi? analytic perturbation weighted residuals method was used to solve the nonlinear bending problem of shallow shells, and the fifth order B spline was taken as trial function to seek an efficient method for nonlinear bending problem of shallow shells. The results from the present method are in good agreement with those derived from other methods. The present method is of higher accuracy, lower computing time and wider adaptability. In addition, the design of computer program is simple and it is easy to be programmed.展开更多
Lagrangian-Eulerian formulations based on a generalized variational principle of fluid-solid coupling dynamics are established to describe flow-induced vibration of a structure under small deformation in an incompress...Lagrangian-Eulerian formulations based on a generalized variational principle of fluid-solid coupling dynamics are established to describe flow-induced vibration of a structure under small deformation in an incompressible viscous fluid flow. The spatial discretization of the formulations is based on the multi-linear interpolating functions by using the finite element method for both the fluid and solid structures. The generalized trapezoidal rule is used to obtain apparently non-symmetric linear equations in an incremental form for the variables of the flow and vibration. The nonlinear convective term and time factors are contained in the non-symmetric coefficient matrix of the equations. The generalized minimum residual （GMRES） method is used to solve the incremental equations. A new stable algorithm of GMRES-Hughes-Newmark is developed to deal with the flow-induced vibration with dynamical fluid-structure interaction in complex geometries. Good agreement between the simulations and laboratory measurements of the pressure and blade vibration accelerations in a hydro turbine passage was obtained, indicating that the GiViRES-Hughes-Newmark algorithm presented in this paper is suitable for dealing with the flow-induced vibration of structures under small deformation.展开更多
The effect of vibratory stress relief （VSR） is usually evaluated with the indirect method of observing the change of amplitude frequency response characteristics of structures. A new kind of evaluating method of VSR...The effect of vibratory stress relief （VSR） is usually evaluated with the indirect method of observing the change of amplitude frequency response characteristics of structures. A new kind of evaluating method of VSR based on the ultrasonic time-of-arrival method （UTM）, which can obtain the residual stress directly through measuring the propagation time of ultrasonic wave in the material, is presented. At first, the principle of the measuring method of residual stress based on UTM is analyzed. Then the measuring system of the method is described, which is in virtue of ultrasonic flaw detector and high-sampling-rate digital oscillograph. And a set of calibration system that contains a piece of standard specimen is also introduced. Experimental results prove the relation between the residual stress and the propagation time of ultrasonic in workpieces. Finally, the measuring and calibration systems are applied in evaluating the effect of VSR. The final test results show that the method is effective.展开更多
The bi-conjugate gradients(Bi-CG)and bi-conjugate residual(Bi-CR)methods are powerful tools for solving nonsymmetric linear systems Ax=b.By using Kronecker product and vectorization operator,this paper develops the Bi...The bi-conjugate gradients(Bi-CG)and bi-conjugate residual(Bi-CR)methods are powerful tools for solving nonsymmetric linear systems Ax=b.By using Kronecker product and vectorization operator,this paper develops the Bi-CG and Bi-CR methods for the solution of the generalized Sylvester-transpose matrix equationp i=1(Ai X Bi+Ci XTDi)=E(including Lyapunov,Sylvester and Sylvester-transpose matrix equations as special cases).Numerical results validate that the proposed algorithms are much more efcient than some existing algorithms.展开更多
In this paper, the minimal residual （MRES） method for solving nonsymmetric equation systems was improved, the recurrence relation was deduced between the approximate solutions of the linear equation system Ax = b, a...In this paper, the minimal residual （MRES） method for solving nonsymmetric equation systems was improved, the recurrence relation was deduced between the approximate solutions of the linear equation system Ax = b, and a more effective method was presented, which can reduce the operational count and the storage.展开更多
Generally the incompressible viscous flow problem is described by the Navier-Stokes equation. Based on the weighted residual method the discrete formulation of element-free Galerkin is inferred in this paper. By the s...Generally the incompressible viscous flow problem is described by the Navier-Stokes equation. Based on the weighted residual method the discrete formulation of element-free Galerkin is inferred in this paper. By the step-bystep computation in the field of time, and adopting the least-square estimation of the-same-order shift, this paper has calculated both velocity and pressure from the decoupling independent equations. Each time fraction Newton-Raphson iterative method is applied for the velocity and pressure. Finally, this paper puts the method into practice of the shear-drive cavity flow, verifying the validity, high accuracy and stability.展开更多
In this paper, a parallel algorithm with iterative form for solving finite element equation is presented. Based on the iterative solution of linear algebra equations, the parallel computational steps are introduced in...In this paper, a parallel algorithm with iterative form for solving finite element equation is presented. Based on the iterative solution of linear algebra equations, the parallel computational steps are introduced in this method. Also by using the weighted residual method and choosing the appropriate weighting functions, the finite element basic form of parallel algorithm is deduced. The program of this algorithm has been realized on the ELXSI-6400 parallel computer of Xi'an Jiaotong University. The computational results show the operational speed will be raised and the CPU time will be cut down effectively. So this method is one kind of effective parallel algorithm for solving the finite element equations of large-scale structures.展开更多
In this paper, a weighted residual method for the elastic-plastic analysis near a crack tip is systematically given by taking the model of power-law hardening under plane strain condition as a sample. The elastic-plas...In this paper, a weighted residual method for the elastic-plastic analysis near a crack tip is systematically given by taking the model of power-law hardening under plane strain condition as a sample. The elastic-plastic solutions of the crack lip field and an approach based on the superposition of the nonlinear finite element method on the complete solution in the whole crack body field, to calculate the plastic stress intensity factors, are also developed. Therefore, a complete analvsis based on the calculation both for the crack tip field and for the whole crack body field is provided.展开更多
In this paper, the solution to the structure consisting of a bead and a board is given as a result of the application of the subregion function method which was suggested in ref. [1]. The same problem is also computed...In this paper, the solution to the structure consisting of a bead and a board is given as a result of the application of the subregion function method which was suggested in ref. [1]. The same problem is also computed with finite element method. The comparison between the two results shows that the application of the subregion function in the method of weighted residuals is practical and effective, especially for solving compound structures.展开更多
In this paper, using the integration method, it is sought to solve the problem for the laminar boundary_layer on a flat plate. At first, a trial function of the velocity profile which satisfies the basical boundary co...In this paper, using the integration method, it is sought to solve the problem for the laminar boundary_layer on a flat plate. At first, a trial function of the velocity profile which satisfies the basical boundary conditions is selected. The coefficients in the trial function awaiting decision are decided by using some numerical results of the boundary_layer differential equations. It is similar to the method proposed by Peng Yichuan, but the former is simpler. According to the method proposed by Peng, when the awaiting decision coefficients of the trial function are decided, it is sought to solve a third power algebraic equation. On the other hand, in this paper, there is only need for solving a linear algebraic equation. Moreover, the accuracy of the results of this paper is higher than that of Peng.展开更多
The weighted residuals method was used for obtaining the boundary integral representation of the velocity of the three-dimensional inviscid irrotational flow. It is shown that velocity in an arbitrary point of domain ...The weighted residuals method was used for obtaining the boundary integral representation of the velocity of the three-dimensional inviscid irrotational flow. It is shown that velocity in an arbitrary point of domain can be expressed through its values on the boundary. Boundary integral equations of the second kind for solving boundary-valued problems of the first and second kinds are developed. The result has been also generalised to the case of solenoidal vector fields with potential vorticity. It is shown that the resulting integral equations are Fredholm integral equations of the second kind and allow effective numerical solving of corresponding boundary-valued problems. Examples of numerical solutions for a sphere and an ellipsoid are given for demonstration of efficiency of the offered method.展开更多
The numerical approach for finding the solution of fractional order systems of boundary value problems (BPVs) is derived in this paper. The implementation of the weighted residuals such as Galerkin, Least Square, and ...The numerical approach for finding the solution of fractional order systems of boundary value problems (BPVs) is derived in this paper. The implementation of the weighted residuals such as Galerkin, Least Square, and Collocation methods are included for solving fractional order differential equations, which is broadened to acquire the approximate solutions of fractional order systems with differentiable polynomials, namely Legendre polynomials, as basis functions. The algorithm of the residual formulations of matrix form can be coded efficiently. The interpretation of Caputo fractional derivatives is employed here. We have demonstrated these methods numerically through a few examples of linear and nonlinear BVPs. The results in absolute errors show that the present method efficiently finds the numerical solutions of fractional order systems of differential equations.展开更多
Analysis and design of linear periodic control systems are closely related to the periodic matrix equations.The biconjugate residual method(BCR for short)have been introduced by Vespucci and Broyden for efficiently so...Analysis and design of linear periodic control systems are closely related to the periodic matrix equations.The biconjugate residual method(BCR for short)have been introduced by Vespucci and Broyden for efficiently solving linear systems Aα=b.The objective of this paper is to provide one new iterative algorithm based on BCR method to find the symmetric periodic solutions of linear periodic matrix equations.This kind of periodic matrix equations has not been dealt with yet.This iterative method is guaranteed to converge in a finite number of steps in the absence of round-off errors.Some numerical results are performed to illustrate the efficiency and feasibility of new method.展开更多
The fabrication of high-precision panels for the compact antenna test range (CATR) with a sandwich construction of two aluminum skin-plates and one aluminum middle plate,which are bonded to two aluminum honeycomb core...The fabrication of high-precision panels for the compact antenna test range (CATR) with a sandwich construction of two aluminum skin-plates and one aluminum middle plate,which are bonded to two aluminum honeycomb core-layers poses a lot of tricky problems. Of them,the force analysis of individual skin-layers and the springback calculation of sandwich are of utmost importance. Under reasonable assumptions,by using Fourier expansion of stress function and power series expansion of deflection function,two boun...展开更多
This paper aims to study a novel expansion discrete grey forecasting model, which could aggregate input information more effectively. In general, existing multi-factor grey forecasting models, such as one order and h ...This paper aims to study a novel expansion discrete grey forecasting model, which could aggregate input information more effectively. In general, existing multi-factor grey forecasting models, such as one order and h variables grey forecasting model （GM （1, h））, always aggregate the main system variable and independent variables in a linear form rather than a nonlinear form, while a nonlinear form could be used in more cases than the linear form. And the nonlinear form could aggregate collinear independent factors, which widely lie in many multi-factor forecasting problems. To overcome this problem, a new approach, named as the Solow residual method, is proposed to aggregate independent factors. And a new expansion model, feedback multi-factor discrete grey forecasting model based on the Solow residual method （abbreviated as FDGM （1, h））, is proposed accordingly. Then the feedback control equation and the parameters＇ solution of the FDGM （1, h） model are given. Finally, a real application is used to test the modelling accuracy of the FDGM （1, h） model. Results show that the FDGM （1, h） model is much better than the nonhomogeneous discrete grey forecasting model （NDGM） and the GM （1, h） model.展开更多
A Fast Multipole Method (FMM) is developed as a numerical approach to the reduction of the computational cost and requirement memory capacity for a large in solving large-scale problems. In this paper it is applied to...A Fast Multipole Method (FMM) is developed as a numerical approach to the reduction of the computational cost and requirement memory capacity for a large in solving large-scale problems. In this paper it is applied to the boundary integral equation method (BIEM) for current diffraction from arbitrary 3D bodies. The boundary integral equation is discretized by higher order elements, the FMM is applied to avoid the matrix/vector product, and the resulting algebraic equation is solved by the Generalized Conjugate Residual method (GCR). Numerical examination shows that the FMM is more efficient than the direct evaluation method in computational cost and storage of computers.展开更多
A convenient and universal residue calculus method is proposed to study the stochastic response behaviors of an axially moving viscoelastic beam with random noise excitations and fractional order constitutive relation...A convenient and universal residue calculus method is proposed to study the stochastic response behaviors of an axially moving viscoelastic beam with random noise excitations and fractional order constitutive relationship, where the random excitation can be decomposed as a nonstationary stochastic process, Mittag-Leffler internal noise, and external stationary noise excitation. Then, based on the Laplace transform approach, we derived the mean value function, variance function and covariance function through the Green＇s function technique and the residue calculus method, and obtained theoretical results. In some special case of fractional order derivative α , the Monte Carlo approach and error function results were applied to check the effectiveness of the analytical results, and good agreement was found. Finally in a general-purpose case, we also confirmed the analytical conclusion via the direct Monte Carlo simulation.展开更多
Mathematical simulation of nonlinear physical and abstract systems is a very vital process for predicting the solution behavior of fractional partial differential equations(FPDEs)corresponding to different application...Mathematical simulation of nonlinear physical and abstract systems is a very vital process for predicting the solution behavior of fractional partial differential equations(FPDEs)corresponding to different applications in science and engineering. In this paper, an attractive reliable analytical technique, the conformable residual power series, is implemented for constructing approximate series solutions for a class of nonlinear coupled FPDEs arising in fluid mechanics and fluid flow, which are often designed to demonstrate the behavior of weakly nonlinear and long waves and describe the interaction of shallow water waves. In the proposed technique the n-truncated representation is substituted into the original system and it is assumed the(n-1) conformable derivative of the residuum is zero. This allows us to estimate coefficients of truncation and successively add the subordinate terms in the multiple fractional power series with a rapidly convergent form. The influence, capacity, and feasibility of the presented approach are verified by testing some real-world applications. Finally, highlights and some closing comments are attached.展开更多
文摘Computer programs have definitely become indispensable for designing power transformer. Among several applications, computer programs are mostly used for electric field calculation and thus electrical insulation concerns. In consequence, studies based on analytical approach to basic studies of correlated problems have become even more important because they form the very basis of knowledge that is necessary to every transformer designer in view of taking all the advantages of computational analyses. On the other hand, one of the most important basic studies consists in the evaluation of voltage surge distribution along transformer windings for which the method of separation of variables has been extensively used thanks to some simplifying assumptions. With this aim, authors have developed and previously published works that show the applicability of an alternative and useful analytical method that is the method of the residues, which requires no simplification to be assumed. In this work, another important step is taken towards proofing the total applicability of this promising method that is through a practical problem. A comparison to the numerical method TLM （transmission line method） is also performed and concordance with TLM and experimental data confirms the proposal of the method of residues can be also applicable to several others problems of electromagnetism.
文摘In the aerospace field, residual stress directly affects the strength, fatigue life and dimensional stability of thin-walled structural components, and is a key factor to ensure flight safety and reliability. At present, research on residual stress at home and abroad mainly focuses on the optimization of traditional detection technology, stress control of manufacturing process and service performance evaluation, among which research on residual stress detection methods mainly focuses on the improvement of the accuracy, sensitivity, reliability and other performance of existing detection methods, but it still faces many challenges such as extremely small detection range, low efficiency, large error and limited application range.
文摘The semi? analytic perturbation weighted residuals method was used to solve the nonlinear bending problem of shallow shells, and the fifth order B spline was taken as trial function to seek an efficient method for nonlinear bending problem of shallow shells. The results from the present method are in good agreement with those derived from other methods. The present method is of higher accuracy, lower computing time and wider adaptability. In addition, the design of computer program is simple and it is easy to be programmed.
基金supported by the National Natural Science Foundation of China (No. 50839003)the Natural Science Foundation of Yunnan Province (No. 2008GA027)
文摘Lagrangian-Eulerian formulations based on a generalized variational principle of fluid-solid coupling dynamics are established to describe flow-induced vibration of a structure under small deformation in an incompressible viscous fluid flow. The spatial discretization of the formulations is based on the multi-linear interpolating functions by using the finite element method for both the fluid and solid structures. The generalized trapezoidal rule is used to obtain apparently non-symmetric linear equations in an incremental form for the variables of the flow and vibration. The nonlinear convective term and time factors are contained in the non-symmetric coefficient matrix of the equations. The generalized minimum residual （GMRES） method is used to solve the incremental equations. A new stable algorithm of GMRES-Hughes-Newmark is developed to deal with the flow-induced vibration with dynamical fluid-structure interaction in complex geometries. Good agreement between the simulations and laboratory measurements of the pressure and blade vibration accelerations in a hydro turbine passage was obtained, indicating that the GiViRES-Hughes-Newmark algorithm presented in this paper is suitable for dealing with the flow-induced vibration of structures under small deformation.
基金This project is supported by National Natural Science Foundation of China(No.50305036).
文摘The effect of vibratory stress relief （VSR） is usually evaluated with the indirect method of observing the change of amplitude frequency response characteristics of structures. A new kind of evaluating method of VSR based on the ultrasonic time-of-arrival method （UTM）, which can obtain the residual stress directly through measuring the propagation time of ultrasonic wave in the material, is presented. At first, the principle of the measuring method of residual stress based on UTM is analyzed. Then the measuring system of the method is described, which is in virtue of ultrasonic flaw detector and high-sampling-rate digital oscillograph. And a set of calibration system that contains a piece of standard specimen is also introduced. Experimental results prove the relation between the residual stress and the propagation time of ultrasonic in workpieces. Finally, the measuring and calibration systems are applied in evaluating the effect of VSR. The final test results show that the method is effective.
文摘The bi-conjugate gradients(Bi-CG)and bi-conjugate residual(Bi-CR)methods are powerful tools for solving nonsymmetric linear systems Ax=b.By using Kronecker product and vectorization operator,this paper develops the Bi-CG and Bi-CR methods for the solution of the generalized Sylvester-transpose matrix equationp i=1(Ai X Bi+Ci XTDi)=E(including Lyapunov,Sylvester and Sylvester-transpose matrix equations as special cases).Numerical results validate that the proposed algorithms are much more efcient than some existing algorithms.
文摘In this paper, the minimal residual （MRES） method for solving nonsymmetric equation systems was improved, the recurrence relation was deduced between the approximate solutions of the linear equation system Ax = b, and a more effective method was presented, which can reduce the operational count and the storage.
文摘Generally the incompressible viscous flow problem is described by the Navier-Stokes equation. Based on the weighted residual method the discrete formulation of element-free Galerkin is inferred in this paper. By the step-bystep computation in the field of time, and adopting the least-square estimation of the-same-order shift, this paper has calculated both velocity and pressure from the decoupling independent equations. Each time fraction Newton-Raphson iterative method is applied for the velocity and pressure. Finally, this paper puts the method into practice of the shear-drive cavity flow, verifying the validity, high accuracy and stability.
基金This work has been carried out as of a research project which has been supported by the National Structural Strength & Vibration Laboratory of Xi'an Jiaotong University with National Fund
文摘In this paper, a parallel algorithm with iterative form for solving finite element equation is presented. Based on the iterative solution of linear algebra equations, the parallel computational steps are introduced in this method. Also by using the weighted residual method and choosing the appropriate weighting functions, the finite element basic form of parallel algorithm is deduced. The program of this algorithm has been realized on the ELXSI-6400 parallel computer of Xi'an Jiaotong University. The computational results show the operational speed will be raised and the CPU time will be cut down effectively. So this method is one kind of effective parallel algorithm for solving the finite element equations of large-scale structures.
文摘In this paper, a weighted residual method for the elastic-plastic analysis near a crack tip is systematically given by taking the model of power-law hardening under plane strain condition as a sample. The elastic-plastic solutions of the crack lip field and an approach based on the superposition of the nonlinear finite element method on the complete solution in the whole crack body field, to calculate the plastic stress intensity factors, are also developed. Therefore, a complete analvsis based on the calculation both for the crack tip field and for the whole crack body field is provided.
文摘In this paper, the solution to the structure consisting of a bead and a board is given as a result of the application of the subregion function method which was suggested in ref. [1]. The same problem is also computed with finite element method. The comparison between the two results shows that the application of the subregion function in the method of weighted residuals is practical and effective, especially for solving compound structures.
文摘In this paper, using the integration method, it is sought to solve the problem for the laminar boundary_layer on a flat plate. At first, a trial function of the velocity profile which satisfies the basical boundary conditions is selected. The coefficients in the trial function awaiting decision are decided by using some numerical results of the boundary_layer differential equations. It is similar to the method proposed by Peng Yichuan, but the former is simpler. According to the method proposed by Peng, when the awaiting decision coefficients of the trial function are decided, it is sought to solve a third power algebraic equation. On the other hand, in this paper, there is only need for solving a linear algebraic equation. Moreover, the accuracy of the results of this paper is higher than that of Peng.
文摘The weighted residuals method was used for obtaining the boundary integral representation of the velocity of the three-dimensional inviscid irrotational flow. It is shown that velocity in an arbitrary point of domain can be expressed through its values on the boundary. Boundary integral equations of the second kind for solving boundary-valued problems of the first and second kinds are developed. The result has been also generalised to the case of solenoidal vector fields with potential vorticity. It is shown that the resulting integral equations are Fredholm integral equations of the second kind and allow effective numerical solving of corresponding boundary-valued problems. Examples of numerical solutions for a sphere and an ellipsoid are given for demonstration of efficiency of the offered method.
文摘The numerical approach for finding the solution of fractional order systems of boundary value problems (BPVs) is derived in this paper. The implementation of the weighted residuals such as Galerkin, Least Square, and Collocation methods are included for solving fractional order differential equations, which is broadened to acquire the approximate solutions of fractional order systems with differentiable polynomials, namely Legendre polynomials, as basis functions. The algorithm of the residual formulations of matrix form can be coded efficiently. The interpretation of Caputo fractional derivatives is employed here. We have demonstrated these methods numerically through a few examples of linear and nonlinear BVPs. The results in absolute errors show that the present method efficiently finds the numerical solutions of fractional order systems of differential equations.
基金Supported by NSFC (No.12371378)NSF of Fujian Province (Nos.2024J01980,2023J01955)。
文摘Analysis and design of linear periodic control systems are closely related to the periodic matrix equations.The biconjugate residual method(BCR for short)have been introduced by Vespucci and Broyden for efficiently solving linear systems Aα=b.The objective of this paper is to provide one new iterative algorithm based on BCR method to find the symmetric periodic solutions of linear periodic matrix equations.This kind of periodic matrix equations has not been dealt with yet.This iterative method is guaranteed to converge in a finite number of steps in the absence of round-off errors.Some numerical results are performed to illustrate the efficiency and feasibility of new method.
基金National Natural Science Foundation of China (10477001, 60673056)
文摘The fabrication of high-precision panels for the compact antenna test range (CATR) with a sandwich construction of two aluminum skin-plates and one aluminum middle plate,which are bonded to two aluminum honeycomb core-layers poses a lot of tricky problems. Of them,the force analysis of individual skin-layers and the springback calculation of sandwich are of utmost importance. Under reasonable assumptions,by using Fourier expansion of stress function and power series expansion of deflection function,two boun...
基金supported by the National Natural Science Foundation of China(7117111370901041)
文摘This paper aims to study a novel expansion discrete grey forecasting model, which could aggregate input information more effectively. In general, existing multi-factor grey forecasting models, such as one order and h variables grey forecasting model （GM （1, h））, always aggregate the main system variable and independent variables in a linear form rather than a nonlinear form, while a nonlinear form could be used in more cases than the linear form. And the nonlinear form could aggregate collinear independent factors, which widely lie in many multi-factor forecasting problems. To overcome this problem, a new approach, named as the Solow residual method, is proposed to aggregate independent factors. And a new expansion model, feedback multi-factor discrete grey forecasting model based on the Solow residual method （abbreviated as FDGM （1, h））, is proposed accordingly. Then the feedback control equation and the parameters＇ solution of the FDGM （1, h） model are given. Finally, a real application is used to test the modelling accuracy of the FDGM （1, h） model. Results show that the FDGM （1, h） model is much better than the nonhomogeneous discrete grey forecasting model （NDGM） and the GM （1, h） model.
文摘A Fast Multipole Method (FMM) is developed as a numerical approach to the reduction of the computational cost and requirement memory capacity for a large in solving large-scale problems. In this paper it is applied to the boundary integral equation method (BIEM) for current diffraction from arbitrary 3D bodies. The boundary integral equation is discretized by higher order elements, the FMM is applied to avoid the matrix/vector product, and the resulting algebraic equation is solved by the Generalized Conjugate Residual method (GCR). Numerical examination shows that the FMM is more efficient than the direct evaluation method in computational cost and storage of computers.
基金supported by the National Natural Science Foundation of China (11172233, 10932009 and 10972181)Program for New Century Excellent Talents in University+1 种基金the Shaanxi Project for Young New Star in Science & TechnologyNPU Foundation for Fundamental Research and New Faculties and Research Area Project
文摘A convenient and universal residue calculus method is proposed to study the stochastic response behaviors of an axially moving viscoelastic beam with random noise excitations and fractional order constitutive relationship, where the random excitation can be decomposed as a nonstationary stochastic process, Mittag-Leffler internal noise, and external stationary noise excitation. Then, based on the Laplace transform approach, we derived the mean value function, variance function and covariance function through the Green＇s function technique and the residue calculus method, and obtained theoretical results. In some special case of fractional order derivative α , the Monte Carlo approach and error function results were applied to check the effectiveness of the analytical results, and good agreement was found. Finally in a general-purpose case, we also confirmed the analytical conclusion via the direct Monte Carlo simulation.
基金Authors gratefully acknowledge Ajman University for providing facilities for our research under Grant Ref.No.2019-IRG-HBS-11.
文摘Mathematical simulation of nonlinear physical and abstract systems is a very vital process for predicting the solution behavior of fractional partial differential equations(FPDEs)corresponding to different applications in science and engineering. In this paper, an attractive reliable analytical technique, the conformable residual power series, is implemented for constructing approximate series solutions for a class of nonlinear coupled FPDEs arising in fluid mechanics and fluid flow, which are often designed to demonstrate the behavior of weakly nonlinear and long waves and describe the interaction of shallow water waves. In the proposed technique the n-truncated representation is substituted into the original system and it is assumed the(n-1) conformable derivative of the residuum is zero. This allows us to estimate coefficients of truncation and successively add the subordinate terms in the multiple fractional power series with a rapidly convergent form. The influence, capacity, and feasibility of the presented approach are verified by testing some real-world applications. Finally, highlights and some closing comments are attached.
