Since each rock joint is unique by nature,the utilization of replicas in direct shear testing is required to carry out experimental parameter studies.However,information about the ability of the replicas to simulate t...Since each rock joint is unique by nature,the utilization of replicas in direct shear testing is required to carry out experimental parameter studies.However,information about the ability of the replicas to simulate the shear mechanical behavior of the rock joint and their dispersion in direct shear testing is lacking.With the aim to facilitate generation of high-quality direct shear test data from replicas,a novel component in the testing procedure is introduced by presenting two parameters for geometric quality assurance.The parameters are derived from surface comparisons of three-dimensional(3D)scanning data of the rock joint and its replicas.The first parameter,smf,captures morphological deviations between the replica and the rock joint surfaces.smf is derived as the standard deviation of the deviations between the coordinate points of the replica and the rock joint.Four sources of errors introduced in the replica manufacturing process employed in this study could be identified.These errors could be minimized,yielding replicas with smf0.06 mm.The second parameter is a vector,VHp100,which describes deviations with respect to the shear direction.It is the projection of the 100 mm long normal vector of the best-fit plane of the replica joint surface to the corresponding plane of the rock joint.VHp100was found to be less than or equal to 0.36 mm in this study.Application of these two geometric quality assurance parameters demonstrates that it is possible to manufacture replicas with high geometric similarity to the rock joint.In a subsequent paper(part 2),smf and VHp100 are incorporated in a novel quality assurance method,in which the parameters shall be evaluated prior to direct shear testing.Replicas having parameter values below established thresholds shall have a known and narrow dispersion and imitate the shear mechanical behavior of the rock joint.展开更多
Replicas can improve the data reliability in distributed system. However, the traditional algorithms for replica management are based on the assumption that all replicas have the uniform reliability, which is inaccura...Replicas can improve the data reliability in distributed system. However, the traditional algorithms for replica management are based on the assumption that all replicas have the uniform reliability, which is inaccurate in some actual systems. To address such problem, a novel algorithm is proposed based on dynamic programming to manage the number and distribution of replicas in different nodes. By using Markov model, replicas management is organized as a multi-phase process, and the recursion equations are provided. In this algorithm, the heterogeneity of nodes, the expense for maintaining replicas and the engaged space have been considered. Under these restricted conditions, this algorithm realizes high data reliability in a distributed system. The results of case analysis prove the feasibility of the algorithm.展开更多
Trionyx sinensis Hemorrhagic Syndrome Virus(TSHSV)is an arterivirus newly discovered in Chinese softshell turtles.Little is known about the effect of antibodies against the virus or the distribution of the virus in di...Trionyx sinensis Hemorrhagic Syndrome Virus(TSHSV)is an arterivirus newly discovered in Chinese softshell turtles.Little is known about the effect of antibodies against the virus or the distribution of the virus in different organs of infected turtles.In this study,a partial protein of TSHSV-HP4 was produced using a prokaryotic expression system,and its polyclonal antibody was generated.The polyclonal antibody was confirmed by western blot and dot enzyme-linked immunosorbent assay(dot-ELISA).The distribution of TSHSV in different organs of T.sinensis was examined by immunohistochemistry(IHC)and the expression of immune-related genes was analyzed using quantitative real-time polymerase chain reaction(qRT-PCR).The results indicated that the recombinant TSHSV-HP4 protein was successfully expressed,and the generated polyclonal antibody showed specific binding to viral particles in the lung tissues of infected turtles.The IHC assay indicated that the virus was highly localized in various cells,including intestinal lymphocytes,enterocytes,kidney epithelial cells,spleen cells,lung macrophages,and cardiomyocytes.The qRT-PCR analysis revealed that TSHSV was detected in all organs tested,including the lungs,liver,kidneys,spleen,and heart.The numbers of viral mRNA copies in lung and heart tissues were significantly higher in the virus-antibody group than in the virus group.The interferonstimulated genes(ISGs),myxovirus resistance protein 2(MX2)and radical S-adenosyl methionine domain containing 2(RSAD2)were highly upregulated in all groups of infected turtles.Antibody-dependent enhancement(ADE)seemed to occur after stimulation by the polyclonal antibody,because significantly greater expression of the two genes was detected in the virus-antibody group than in the virus group.Overall,these results are important in understanding the cell localization of TSHSV and the immune response of infected turtles.展开更多
Each rock joint is unique by nature which means that utilization of replicas in direct shear tests is required in experimental parameter studies.However,a method to acquire knowledge about the ability of the replicas ...Each rock joint is unique by nature which means that utilization of replicas in direct shear tests is required in experimental parameter studies.However,a method to acquire knowledge about the ability of the replicas to imitate the shear mechanical behavior of the rock joint and their dispersion in direct shear testing is lacking.In this study,a novel method is presented for geometric quality assurance of replicas.The aim is to facilitate generation of high-quality direct shear testing data as a prerequisite for reliable subsequent analyses of the results.In Part 1 of this study,two quality assurance parameters,smf and V_(Hp100),are derived and their usefulness for evaluation of geometric deviations,i.e.geometric reproducibility,is shown.In Part 2,the parameters are validated by showing a correlation between the parameters and the shear mechanical behavior,which qualifies the parameters for usage in the quality assurance method.Unique results from direct shear tests presenting comparisons between replicas and the rock joint show that replicas fulfilling proposed threshold values of σ_(mf)<0.06 mm and|V_(Hp100)|<0.2 mm have a narrow dispersion and imitate the shear mechanical behavior of the rock joint in all aspects apart from having a slightly lower peak shear strength.The wear in these replicas,which have similar morphology as the rock joint,is in the same areas as in the rock joint.The wear is slightly larger in the rock joint and therefore the discrepancy in peak shear strength derives from differences in material properties,possibly from differences in toughness.It is shown by application of the suggested method that the quality assured replicas manufactured following the process employed in this study phenomenologically capture the shear strength characteristics,which makes them useful in parameter studies.展开更多
In an asynchronous cooperative editing workflow of a structured document, each of the co-authors receives in the different phases of the editing process, a copy of the document to insert its contribution. For confiden...In an asynchronous cooperative editing workflow of a structured document, each of the co-authors receives in the different phases of the editing process, a copy of the document to insert its contribution. For confidentiality reasons, this copy may be only a partial replica containing only parts of the (global) document which are of demonstrated interest for the considered co-author. Note that some parts may be a demonstrated interest over a co-author;they will therefore be accessible concurrently. When it’s synchronization time (e.g. at the end of an asynchronous editing phase of the process), we want to merge all contributions of all authors in a single document. Due to the asynchronism of edition and to the potential existence of the document parts offering concurrent access, conflicts may arise and make partial replicas unmergeable in their entirety: they are inconsistent, meaning that they contain conflictual parts. The purpose of this paper is to propose a merging approach said by consensus of such partial replicas using tree automata. Specifically, from the partial replicas updates, we build a tree automaton that accepts exactly the consensus documents. These documents are the maximum prefixes containing no conflict of partial replicas merged.展开更多
In this contribution, the template assisted synthesis of porous carbons by chemical vapor deposition in porous concrete templates has been described for the first time. Porous concrete made templates can be obtained i...In this contribution, the template assisted synthesis of porous carbons by chemical vapor deposition in porous concrete templates has been described for the first time. Porous concrete made templates can be obtained in almost any geometrical shape and are therefore attractive templates to prepare porous carbon monoliths. The carbon deposition process in porous concrete follows a three-stage-course consisting in an initial period, a period of fast carbon deposition and a period of slow carbon deposition. The carbon growth within the template pores occurs obviously plug-like from the inner to the outer sphere. Any continuous covering of the template pore walls by carbon could not be observed. In difference to porous concrete, the carbon deposition in silica gel is strongly accompanied by mass transfer limitations. For porous concrete, such strong effect has not been observed obviously due to its hierarchical pore system. The template materials have been loaded with carbon by chemical vapor deposition in a flow reactor. The process of the template pore filling has been characterized by the time dependence of the template mass gain. The materials have been characterized by means of X-ray tomography and nitrogen adsorption at 77 K, respectively.展开更多
Our previous reports showed that one opal mutation (UGA) and one ochre mutation (UAA) respectively located in the replicase and movement protein (MP) genes of the attenuated tomato mosaic virus K(ToMV-K) contribute to...Our previous reports showed that one opal mutation (UGA) and one ochre mutation (UAA) respectively located in the replicase and movement protein (MP) genes of the attenuated tomato mosaic virus K(ToMV-K) contribute to the viral attenuation. To explore a wider application of this attenuation pattern to other plant viruses, we have constructed three mutants which respectively contain one opal mutation of the replicase gene and/or one ochre mutation of the MP using PCR-mediated site-directed mutagenesis from a virulent tobacco mosaic virus isolated from China (TMV-Cv). Plant infection performed by in vitro transcripts revealed that the MP truncated mutant TMV-Cvmp and the replicase-MP truncated mutant TMV-Cvrase-mp were infectious on both local lesion (Nicotiana tabacum cv. Xanthi NC) and systemic (N. tabacum cv. K326) host plants, while the replicase truncated mutant TMV-Cvrase was non-infectious. The K326 plant infected by TMV-Cvrease-mp displayed on|y a little mild mosaic. By electronic microscopy (EM), plant re-inoculation, RNA Dot-blot, RT-PCR and sequencing we demonstrated that the progeny viruses of TMV-Cvmp and TMV-Cvrease-mp shared similar morphological character with TMV-Cv, owned the abilities to infect, replicate and propagate in the assayed plants, and maintained the mutated sites during infection. These data showed that both the opal and the ochre mutations are able to cooperatively induce the attenuated phenotypes of TMV-Cvrase-mp on plants, indicating that the mutation pattern of ToMV-K could be used to attenuate other virulent plant viruses.展开更多
Reconfigurable intelligent surface(RIS)is a novel meta-material which can form a smart radio environment by dynamically altering reflection directions of the impinging electromagnetic waves.In the prior literature,the...Reconfigurable intelligent surface(RIS)is a novel meta-material which can form a smart radio environment by dynamically altering reflection directions of the impinging electromagnetic waves.In the prior literature,the inter-RIS links which also contribute to the performance of the whole system are usually neglected when multiple RISs are deployed.In this paper we investigate a general double-RIS assisted multiple-input multiple-output(MIMO)wireless communication system under spatially correlated non line-of-sight propagation channels,where the cooperation of the double RISs is also considered.The design objective is to maximize the achievable ergodic rate based on full statistical channel state information(CSI).Specifically,we firstly present a closedform asymptotic expression for the achievable ergodic rate by utilizing replica method from statistical physics.Then a full statistical CSI-enabled optimal design is proposed which avoids high pilot training overhead compared to instantaneous CSI-enabled design.To further reduce the signal processing overhead and lower the complexity for practical realization,a common-phase scheme is proposed to design the double RISs.Simulation results show that the derived asymptotic ergodic rate is quite accurate even for small-sized antenna arrays.And the proposed optimization algorithm can achieve substantial gain at the expense of a low overhead and complexity.Furthermore,the cooperative double-RIS assisted MIMO framework is proven to achieve superior ergodic rate performance and high communication reliability under harsh propagation environment.展开更多
We study a novel replication mechanism to ensure service continuity against multiple simultaneous server failures.In this mechanism,each item represents a computing task and is replicated intoξ+1 servers for some int...We study a novel replication mechanism to ensure service continuity against multiple simultaneous server failures.In this mechanism,each item represents a computing task and is replicated intoξ+1 servers for some integerξ≥1,with workloads specified by the amount of required resources.If one or more servers fail,the affected workloads can be redirected to other servers that host replicas associated with the same item,such that the service is not interrupted by the failure of up toξservers.This requires that any feasible assignment algorithm must reserve some capacity in each server to accommodate the workload redirected from potential failed servers without overloading,and determining the optimal method for reserving capacity becomes a key issue.Unlike existing algorithms that assume that no two servers share replicas of more than one item,we first formulate capacity reservation for a general arbitrary scenario.Due to the combinatorial nature of this problem,finding the optimal solution is difficult.To this end,we propose a Generalized and Simple Calculating Reserved Capacity(GSCRC)algorithm,with a time complexity only related to the number of items packed in the server.In conjunction with GSCRC,we propose a robust replica packing algorithm with capacity optimization(RobustPack),which aims to minimize the number of servers hosting replicas and tolerate multiple server failures.Through theoretical analysis and experimental evaluations,we show that the RobustPack algorithm can achieve better performance.展开更多
Groundwater inrush is a hazard that always occurs during underground mining.Grouting is one of the most effective processes to seal underground water inflow for hazard prevention.In this study,grouting experiments are...Groundwater inrush is a hazard that always occurs during underground mining.Grouting is one of the most effective processes to seal underground water inflow for hazard prevention.In this study,grouting experiments are conducted by using a visualized transparent single-fracture replica with plane roughness.Image processing and analysis are performed to investigate the thermo–hydro–mechanical coupling effect on the grouting diffusion under coal mine flowing water conditions.The results show that higher ambient temperature leads to shorter initial gel time of chemical grout and leads to a better relative sealing efficiency in the case of a lower flow rate.However,with a higher water flow rate,the relative sealing efficiency is gradually reduced under higher temperature conditions.The grouting pressure,the seepage pressure,and the temperature are measured.The results reveal that the seepage pressure shows a positive correlation with the grouting pressure,while the temperature change shows a negative correlation with the seepage pressure and the grouting pressure.The“equivalent grouting point offset”effect of grouting shows an eccentric elliptical diffusion with larger grouting distance and width under lower temperature conditions.展开更多
Monolayer colloidal crystals(MCCs)are two-dimensional(2D)colloidal crystals consisting of a monolayer of monodisperse colloidal particles arrayed with a 2D periodic order.In recent years,MCCs have attracted intensive ...Monolayer colloidal crystals(MCCs)are two-dimensional(2D)colloidal crystals consisting of a monolayer of monodisperse colloidal particles arrayed with a 2D periodic order.In recent years,MCCs have attracted intensive interest because they can act as 2D photonic crystals and be used as versatile templates for fabrication of various 2D nanostructure arrays.In this review,we provide an overview of the recent progress in the controllable fabrication of MCCs and their inverse replicas.First,some newly-developed methods for the self-assembly of MCCs based on different strategies including interfacial assembly and convective assembly are introduced.Second,some representative novel methods regarding the fabrication of various functional2D inverse replicas of MCCs,such as 2D arrays of nanobowls,nanocaps,and hollow spheres,as well as 2D monolayer inverse opals(MIOs),are described.In addition,the potential applications of MCCs and their inverse replicas are discussed.展开更多
The paper presents innovative informatics methods for creating virtual technical heritage replicas, which are of significant scientific and practical importance not only to researchers but to the public in general. By...The paper presents innovative informatics methods for creating virtual technical heritage replicas, which are of significant scientific and practical importance not only to researchers but to the public in general. By performing 3D modeling and animation of aircrafts, spaceships, architectural-engineering buildings, and other technical objects, the process of teaming is achieved while promoting the preservation of the replicas for future generations. Modem approaches based on the wide usage of computer technologies attract a greater number of young people to explore the history of science and technology and renew their interest in the field of mechanical engineering.展开更多
文摘Since each rock joint is unique by nature,the utilization of replicas in direct shear testing is required to carry out experimental parameter studies.However,information about the ability of the replicas to simulate the shear mechanical behavior of the rock joint and their dispersion in direct shear testing is lacking.With the aim to facilitate generation of high-quality direct shear test data from replicas,a novel component in the testing procedure is introduced by presenting two parameters for geometric quality assurance.The parameters are derived from surface comparisons of three-dimensional(3D)scanning data of the rock joint and its replicas.The first parameter,smf,captures morphological deviations between the replica and the rock joint surfaces.smf is derived as the standard deviation of the deviations between the coordinate points of the replica and the rock joint.Four sources of errors introduced in the replica manufacturing process employed in this study could be identified.These errors could be minimized,yielding replicas with smf0.06 mm.The second parameter is a vector,VHp100,which describes deviations with respect to the shear direction.It is the projection of the 100 mm long normal vector of the best-fit plane of the replica joint surface to the corresponding plane of the rock joint.VHp100was found to be less than or equal to 0.36 mm in this study.Application of these two geometric quality assurance parameters demonstrates that it is possible to manufacture replicas with high geometric similarity to the rock joint.In a subsequent paper(part 2),smf and VHp100 are incorporated in a novel quality assurance method,in which the parameters shall be evaluated prior to direct shear testing.Replicas having parameter values below established thresholds shall have a known and narrow dispersion and imitate the shear mechanical behavior of the rock joint.
文摘Replicas can improve the data reliability in distributed system. However, the traditional algorithms for replica management are based on the assumption that all replicas have the uniform reliability, which is inaccurate in some actual systems. To address such problem, a novel algorithm is proposed based on dynamic programming to manage the number and distribution of replicas in different nodes. By using Markov model, replicas management is organized as a multi-phase process, and the recursion equations are provided. In this algorithm, the heterogeneity of nodes, the expense for maintaining replicas and the engaged space have been considered. Under these restricted conditions, this algorithm realizes high data reliability in a distributed system. The results of case analysis prove the feasibility of the algorithm.
基金supported by the Zhejiang Provincial Science and Technology Program(Nos.2020YSZX003 and 2020YSZX010)the Zhejiang Provincial Science Exploratory Program(No.2019TSX01),China。
文摘Trionyx sinensis Hemorrhagic Syndrome Virus(TSHSV)is an arterivirus newly discovered in Chinese softshell turtles.Little is known about the effect of antibodies against the virus or the distribution of the virus in different organs of infected turtles.In this study,a partial protein of TSHSV-HP4 was produced using a prokaryotic expression system,and its polyclonal antibody was generated.The polyclonal antibody was confirmed by western blot and dot enzyme-linked immunosorbent assay(dot-ELISA).The distribution of TSHSV in different organs of T.sinensis was examined by immunohistochemistry(IHC)and the expression of immune-related genes was analyzed using quantitative real-time polymerase chain reaction(qRT-PCR).The results indicated that the recombinant TSHSV-HP4 protein was successfully expressed,and the generated polyclonal antibody showed specific binding to viral particles in the lung tissues of infected turtles.The IHC assay indicated that the virus was highly localized in various cells,including intestinal lymphocytes,enterocytes,kidney epithelial cells,spleen cells,lung macrophages,and cardiomyocytes.The qRT-PCR analysis revealed that TSHSV was detected in all organs tested,including the lungs,liver,kidneys,spleen,and heart.The numbers of viral mRNA copies in lung and heart tissues were significantly higher in the virus-antibody group than in the virus group.The interferonstimulated genes(ISGs),myxovirus resistance protein 2(MX2)and radical S-adenosyl methionine domain containing 2(RSAD2)were highly upregulated in all groups of infected turtles.Antibody-dependent enhancement(ADE)seemed to occur after stimulation by the polyclonal antibody,because significantly greater expression of the two genes was detected in the virus-antibody group than in the virus group.Overall,these results are important in understanding the cell localization of TSHSV and the immune response of infected turtles.
文摘Each rock joint is unique by nature which means that utilization of replicas in direct shear tests is required in experimental parameter studies.However,a method to acquire knowledge about the ability of the replicas to imitate the shear mechanical behavior of the rock joint and their dispersion in direct shear testing is lacking.In this study,a novel method is presented for geometric quality assurance of replicas.The aim is to facilitate generation of high-quality direct shear testing data as a prerequisite for reliable subsequent analyses of the results.In Part 1 of this study,two quality assurance parameters,smf and V_(Hp100),are derived and their usefulness for evaluation of geometric deviations,i.e.geometric reproducibility,is shown.In Part 2,the parameters are validated by showing a correlation between the parameters and the shear mechanical behavior,which qualifies the parameters for usage in the quality assurance method.Unique results from direct shear tests presenting comparisons between replicas and the rock joint show that replicas fulfilling proposed threshold values of σ_(mf)<0.06 mm and|V_(Hp100)|<0.2 mm have a narrow dispersion and imitate the shear mechanical behavior of the rock joint in all aspects apart from having a slightly lower peak shear strength.The wear in these replicas,which have similar morphology as the rock joint,is in the same areas as in the rock joint.The wear is slightly larger in the rock joint and therefore the discrepancy in peak shear strength derives from differences in material properties,possibly from differences in toughness.It is shown by application of the suggested method that the quality assured replicas manufactured following the process employed in this study phenomenologically capture the shear strength characteristics,which makes them useful in parameter studies.
文摘In an asynchronous cooperative editing workflow of a structured document, each of the co-authors receives in the different phases of the editing process, a copy of the document to insert its contribution. For confidentiality reasons, this copy may be only a partial replica containing only parts of the (global) document which are of demonstrated interest for the considered co-author. Note that some parts may be a demonstrated interest over a co-author;they will therefore be accessible concurrently. When it’s synchronization time (e.g. at the end of an asynchronous editing phase of the process), we want to merge all contributions of all authors in a single document. Due to the asynchronism of edition and to the potential existence of the document parts offering concurrent access, conflicts may arise and make partial replicas unmergeable in their entirety: they are inconsistent, meaning that they contain conflictual parts. The purpose of this paper is to propose a merging approach said by consensus of such partial replicas using tree automata. Specifically, from the partial replicas updates, we build a tree automaton that accepts exactly the consensus documents. These documents are the maximum prefixes containing no conflict of partial replicas merged.
文摘In this contribution, the template assisted synthesis of porous carbons by chemical vapor deposition in porous concrete templates has been described for the first time. Porous concrete made templates can be obtained in almost any geometrical shape and are therefore attractive templates to prepare porous carbon monoliths. The carbon deposition process in porous concrete follows a three-stage-course consisting in an initial period, a period of fast carbon deposition and a period of slow carbon deposition. The carbon growth within the template pores occurs obviously plug-like from the inner to the outer sphere. Any continuous covering of the template pore walls by carbon could not be observed. In difference to porous concrete, the carbon deposition in silica gel is strongly accompanied by mass transfer limitations. For porous concrete, such strong effect has not been observed obviously due to its hierarchical pore system. The template materials have been loaded with carbon by chemical vapor deposition in a flow reactor. The process of the template pore filling has been characterized by the time dependence of the template mass gain. The materials have been characterized by means of X-ray tomography and nitrogen adsorption at 77 K, respectively.
基金the National Natural Science Foundation of China.
文摘Our previous reports showed that one opal mutation (UGA) and one ochre mutation (UAA) respectively located in the replicase and movement protein (MP) genes of the attenuated tomato mosaic virus K(ToMV-K) contribute to the viral attenuation. To explore a wider application of this attenuation pattern to other plant viruses, we have constructed three mutants which respectively contain one opal mutation of the replicase gene and/or one ochre mutation of the MP using PCR-mediated site-directed mutagenesis from a virulent tobacco mosaic virus isolated from China (TMV-Cv). Plant infection performed by in vitro transcripts revealed that the MP truncated mutant TMV-Cvmp and the replicase-MP truncated mutant TMV-Cvrase-mp were infectious on both local lesion (Nicotiana tabacum cv. Xanthi NC) and systemic (N. tabacum cv. K326) host plants, while the replicase truncated mutant TMV-Cvrase was non-infectious. The K326 plant infected by TMV-Cvrease-mp displayed on|y a little mild mosaic. By electronic microscopy (EM), plant re-inoculation, RNA Dot-blot, RT-PCR and sequencing we demonstrated that the progeny viruses of TMV-Cvmp and TMV-Cvrease-mp shared similar morphological character with TMV-Cv, owned the abilities to infect, replicate and propagate in the assayed plants, and maintained the mutated sites during infection. These data showed that both the opal and the ochre mutations are able to cooperatively induce the attenuated phenotypes of TMV-Cvrase-mp on plants, indicating that the mutation pattern of ToMV-K could be used to attenuate other virulent plant viruses.
基金supported in part by the Xi’an Jiaotong-Liverpool University(XJTLU)Research Development Fund(2024–2027)under Grant RDF-23-02-010supported in part by the Guangdong Basic and Applied Basic Research Foundation under Grant 2023A1515110732+5 种基金supported in part by the National Natural Science Foundation of China(NSFC)under Grant 62071247supported in part by the Science and Technology Development Fund,Macao,China SAR under Grants 0087/2022/AFJ and 001/2024/SKLin part by the National Natural Science Foundation of China under Grant 62261160650in part by the Research Committee of University of Macao,Macao SAR,China under Grants MYRG-GRG2023-00116-FST-UMDF and MYRG2020-00095-FSTsupported in part by the NSFC under Grant 62261160576 and 62301148in part by the Fundamental Research Funds for the Central Universities under Grant 2242023K5003.
文摘Reconfigurable intelligent surface(RIS)is a novel meta-material which can form a smart radio environment by dynamically altering reflection directions of the impinging electromagnetic waves.In the prior literature,the inter-RIS links which also contribute to the performance of the whole system are usually neglected when multiple RISs are deployed.In this paper we investigate a general double-RIS assisted multiple-input multiple-output(MIMO)wireless communication system under spatially correlated non line-of-sight propagation channels,where the cooperation of the double RISs is also considered.The design objective is to maximize the achievable ergodic rate based on full statistical channel state information(CSI).Specifically,we firstly present a closedform asymptotic expression for the achievable ergodic rate by utilizing replica method from statistical physics.Then a full statistical CSI-enabled optimal design is proposed which avoids high pilot training overhead compared to instantaneous CSI-enabled design.To further reduce the signal processing overhead and lower the complexity for practical realization,a common-phase scheme is proposed to design the double RISs.Simulation results show that the derived asymptotic ergodic rate is quite accurate even for small-sized antenna arrays.And the proposed optimization algorithm can achieve substantial gain at the expense of a low overhead and complexity.Furthermore,the cooperative double-RIS assisted MIMO framework is proven to achieve superior ergodic rate performance and high communication reliability under harsh propagation environment.
基金supported in part by the National Key R&D Program of China under No.2023YFB2703800the National Science Foundation of China under Grants U22B2027,62172297,62102262,61902276 and 62272311+3 种基金Tianjin Intelligent Manufacturing Special Fund Project under Grants 20211097the China Guangxi Science and Technology Plan Project(Guangxi Science and Technology Base and Talent Special Project)under Grant AD23026096(Application Number 2022AC20001)Henan Provincial Natural Science Foundation of China under Grant 622RC616CCF-Nsfocus Kunpeng Fund Project under Grants CCF-NSFOCUS202207。
文摘We study a novel replication mechanism to ensure service continuity against multiple simultaneous server failures.In this mechanism,each item represents a computing task and is replicated intoξ+1 servers for some integerξ≥1,with workloads specified by the amount of required resources.If one or more servers fail,the affected workloads can be redirected to other servers that host replicas associated with the same item,such that the service is not interrupted by the failure of up toξservers.This requires that any feasible assignment algorithm must reserve some capacity in each server to accommodate the workload redirected from potential failed servers without overloading,and determining the optimal method for reserving capacity becomes a key issue.Unlike existing algorithms that assume that no two servers share replicas of more than one item,we first formulate capacity reservation for a general arbitrary scenario.Due to the combinatorial nature of this problem,finding the optimal solution is difficult.To this end,we propose a Generalized and Simple Calculating Reserved Capacity(GSCRC)algorithm,with a time complexity only related to the number of items packed in the server.In conjunction with GSCRC,we propose a robust replica packing algorithm with capacity optimization(RobustPack),which aims to minimize the number of servers hosting replicas and tolerate multiple server failures.Through theoretical analysis and experimental evaluations,we show that the RobustPack algorithm can achieve better performance.
基金National Natural Science Foundation of China,Grant/Award Number:41902292。
文摘Groundwater inrush is a hazard that always occurs during underground mining.Grouting is one of the most effective processes to seal underground water inflow for hazard prevention.In this study,grouting experiments are conducted by using a visualized transparent single-fracture replica with plane roughness.Image processing and analysis are performed to investigate the thermo–hydro–mechanical coupling effect on the grouting diffusion under coal mine flowing water conditions.The results show that higher ambient temperature leads to shorter initial gel time of chemical grout and leads to a better relative sealing efficiency in the case of a lower flow rate.However,with a higher water flow rate,the relative sealing efficiency is gradually reduced under higher temperature conditions.The grouting pressure,the seepage pressure,and the temperature are measured.The results reveal that the seepage pressure shows a positive correlation with the grouting pressure,while the temperature change shows a negative correlation with the seepage pressure and the grouting pressure.The“equivalent grouting point offset”effect of grouting shows an eccentric elliptical diffusion with larger grouting distance and width under lower temperature conditions.
基金supported by the National Natural Science Foundation of China(21173010,21073005,and 51121091)Ministry of Science and Technology of China(2013CB932601)
文摘Monolayer colloidal crystals(MCCs)are two-dimensional(2D)colloidal crystals consisting of a monolayer of monodisperse colloidal particles arrayed with a 2D periodic order.In recent years,MCCs have attracted intensive interest because they can act as 2D photonic crystals and be used as versatile templates for fabrication of various 2D nanostructure arrays.In this review,we provide an overview of the recent progress in the controllable fabrication of MCCs and their inverse replicas.First,some newly-developed methods for the self-assembly of MCCs based on different strategies including interfacial assembly and convective assembly are introduced.Second,some representative novel methods regarding the fabrication of various functional2D inverse replicas of MCCs,such as 2D arrays of nanobowls,nanocaps,and hollow spheres,as well as 2D monolayer inverse opals(MIOs),are described.In addition,the potential applications of MCCs and their inverse replicas are discussed.
文摘The paper presents innovative informatics methods for creating virtual technical heritage replicas, which are of significant scientific and practical importance not only to researchers but to the public in general. By performing 3D modeling and animation of aircrafts, spaceships, architectural-engineering buildings, and other technical objects, the process of teaming is achieved while promoting the preservation of the replicas for future generations. Modem approaches based on the wide usage of computer technologies attract a greater number of young people to explore the history of science and technology and renew their interest in the field of mechanical engineering.
