Remote-laser beam cutting is a productive technology without tool wear. Especially when cutting carbon fiber reinforced polymers (CFRP), it offers constant manufacturing quality. Since it is a thermal process, a heat-...Remote-laser beam cutting is a productive technology without tool wear. Especially when cutting carbon fiber reinforced polymers (CFRP), it offers constant manufacturing quality. Since it is a thermal process, a heat-affected zone (HAZ) is formed at the edge of the cut. Based on quasi-static and cyclic mechanical tests on open-hole specimens, the influence of the process on the mechanical properties of CFRP is shown. The quasi-static tests are in good correlation with results from other researchers by indicating an increase in the maximum tensile stress of the test specimens, cut by remote-laser. The reason is the rearrangement of the shear stresses and a reduction of the notch stress concentration. However, the results of the present study show that excessive expansion of the HAZ leads to a reduction in the maximum tensile stress compared to milled test specimens. Under cyclic load conditions, remote-laser beam cutting does not lead to a more pronounced degradation than milling. The mechanical properties of the notched test pieces are sensitive to the expansion of the HAZ. For the production of components it is therefore necessary that the remote-laser beam cutting is carried out under controlled and documentable conditions. For this purpose, process thermography was tested as a tool for quality assurance. The results show that the technology is basically suitable for this task.展开更多
Biosensors, which are the products of the biotechnology industry, are among the key projects of the 7th, 8th, and 9th Fiveyear Plans of China Science ＆ Technology Developing Programs, respectively, and they play an i...Biosensors, which are the products of the biotechnology industry, are among the key projects of the 7th, 8th, and 9th Fiveyear Plans of China Science ＆ Technology Developing Programs, respectively, and they play an important role in developing and reforming traditional biotechnology. SBA series biosensor analyzer, as the only one commercial biosensor in China, has attracted lots of attention in the process of information gathering and measurement for biological industry with the development of technology and society. In this paper, we presented an overview of the most important contributions dealing with the monitoring of the biochemical analytes in fermentation processes using SBA series biosensor analyzers in China. Future trends of the biosensor analyzer in China were also mentioned in the last section.展开更多
Multi-way principal component analysis (MPCA) had been successfully applied to monitoring the batch and semi-batch process in most chemical industry. An improved MPCA approach, step-by-step adaptive MPCA (SAMPCA), usi...Multi-way principal component analysis (MPCA) had been successfully applied to monitoring the batch and semi-batch process in most chemical industry. An improved MPCA approach, step-by-step adaptive MPCA (SAMPCA), using the process variable trajectories to monitoring the batch process is presented in this paper. It does not need to estimate or fill in the unknown part of the process variable trajectory deviation from the current time until the end. The approach is based on a MPCA method that processes the data in a sequential and adaptive manner. The adaptive rate is easily controlled through a forgetting factor that controls the weight of past data in a summation. This algorithm is used to evaluate the industrial streptomycin fermentation process data and is compared with the traditional MPCA. The results show that the method is more advantageous than MPCA, especially when monitoring multi-stage batch process where the latent vector structure can change at several points during the batch.展开更多
Shield remote monitoring system is an effective management method in shield construction process, which can be used for unified management of shield machine, timely grasp of shield machine operation status, analysis o...Shield remote monitoring system is an effective management method in shield construction process, which can be used for unified management of shield machine, timely grasp of shield machine operation status, analysis of shield machine tunneling efficiency. Based on the current function status of the system, this paper expounds how to better play the role of remote monitoring system and provide service for shield construction project management.展开更多
Multivariate statistical process control methods have been widely used in biochemical industries. Batch process is usually monitored by the method of multi-way principal component analysis (MPCA). In this article, a n...Multivariate statistical process control methods have been widely used in biochemical industries. Batch process is usually monitored by the method of multi-way principal component analysis (MPCA). In this article, a new batch process monitoring and fault diagnosis method based on feature extract in Fisher subspace is proposed.The feature vector and the feature direction are extracted by projecting the high-dimension process data onto the low-dimension Fisher space. The similarity of feature vector between the current and the reference batch is calculated for on-line process monitoring and the contribution plot of weights in feature direction is calculated for fault diagnosis. The approach overcomes the need for estimating or tilling in the unknown portion of the process variables trajectories from the current time to the end of the batch. Simulation results on the benchmark model of penicillin fermentation process can demonstrate that in comparison to the MPCA method, the proposed method is more accurate and efficient for process monitoring and fault diagnosis.展开更多
In order to reduce the variations of the product quality in batch processes, multivariate statistical process control methods according to multi-way principal component analysis (MPCA) or multi-way projection to laten...In order to reduce the variations of the product quality in batch processes, multivariate statistical process control methods according to multi-way principal component analysis (MPCA) or multi-way projection to latent structure (MPLS) were proposed for on-line batch process monitoring. However, they are based on the decomposition of relative covariance matrix and strongly affected by outlying observations. In this paper, in view of an efficient projection pursuit algorithm, a robust statistical batch process monitoring (RSBPM) framework,which is resistant to outliers, is proposed to reduce the high demand for modeling data. The construction of robust normal operating condition model and robust control limits are discussed in detail. It is evaluated on monitoring an industrial streptomycin fermentation process and compared with the conventional MPCA. The results show that the RSBPM framework is resistant to possible outliers and the robustness is confirmed.展开更多
Multivariate statistical process control methods have been widely used in biochemical industries. Batch process is usually monitored by the method of multi-way principal component analysis (MPCA). In this article, a n...Multivariate statistical process control methods have been widely used in biochemical industries. Batch process is usually monitored by the method of multi-way principal component analysis (MPCA). In this article, a new batch process monitoring and fault diagnosis method based on feature extract in Fisher subspace is proposed. The feature vector and the feature direction are extracted by projecting the high-dimension process data onto the low-dimension Fisher space. The similarity of feature vector between the current and the reference batch is calcu- lated for on-line process monitoring and the contribution plot of weights in feature direction is calculated for fault diagnosis. The approach overcomes the need for estimating or filling in the unknown portion of the process vari- ables trajectories from the current time to the end of the batch. Simulation results on the benchmark model of peni- cillin fermentation process can demonstrate that in comparison to the MPCA method, the proposed method is more accurate and efficient for process monitoring and fault diagnosis.展开更多
Improving the rail transport security requires development and implementation of neoteric monitoring and control facilities in conditions of increasing speed and intensity of the train movement and high level of terro...Improving the rail transport security requires development and implementation of neoteric monitoring and control facilities in conditions of increasing speed and intensity of the train movement and high level of terrorist threat. Use of Earth remote sensing (ERS), permitting to obtain information from large areas with a sufficiently high resolution, can provide significant assistance in solving the mentioned problems. This paper discusses the possibility of using various means of remote sensing such as satellites and unmanned aerial vehicles (UAV), also known as drones, for receiving information in different ranges of the electromagnetic spectrum. The paper states that joint using of both these means gives new possibilities in improving railroad security.展开更多
In this paper, we introduce a system architecture for a patient centered mobile health monitoring (PCMHM) system that deploys different sensors to determine patients’ activities, medical conditions, and the cause of ...In this paper, we introduce a system architecture for a patient centered mobile health monitoring (PCMHM) system that deploys different sensors to determine patients’ activities, medical conditions, and the cause of an emergency event. This system combines and analyzes sensor data to produce the patients’ detailed health information in real-time. A central computational node with data analyzing capability is used for sensor data integration and analysis. In addition to medical sensors, surrounding environmental sensors are also utilized to enhance the interpretation of the data and to improve medical diagnosis. The PCMHM system has the ability to provide on-demand health information of patients via the Internet, track real-time daily activities and patients’ health condition. This system also includes the capability for assessing patients’ posture and fall detection.展开更多
Free and open access to the Landsat archive has enabled the implementation of national and global terrestrial monitoring projects.Herein,we summarize a project characterizing the change history of Canada’s forested e...Free and open access to the Landsat archive has enabled the implementation of national and global terrestrial monitoring projects.Herein,we summarize a project characterizing the change history of Canada’s forested ecosystems with a time series of data representing 1984-2012.Using the Composite2Change approach,we applied spectral trend analysis to annual best-available-pixel(BAP)surface reflectance image composites produced from Landsat TM and ETM+imagery.A total of 73,544 images were used to produce 29 annual image composites,generating∼400 TB of interim data products and resulting in∼25 TB of annual gap-free reflectance composites and change products.On average,10%of pixels in the annual BAP composites were missing data,with 86%of pixels having data gaps in two consecutive years or fewer.Change detection overall accuracy was 89%.Change attribution overall accuracy was 92%,with higher accuracy for standreplacing wildfire and harvest.Changes were assigned to the correct year with an accuracy of 89%.Outcomes of this project provide baseline information and nationally consistent data source to quantify and characterize changes in forested ecosystems.The methods applied and lessons learned build confidence in the products generated and empower others to develop or refine similar satellite-based monitoring projects.展开更多
文摘Remote-laser beam cutting is a productive technology without tool wear. Especially when cutting carbon fiber reinforced polymers (CFRP), it offers constant manufacturing quality. Since it is a thermal process, a heat-affected zone (HAZ) is formed at the edge of the cut. Based on quasi-static and cyclic mechanical tests on open-hole specimens, the influence of the process on the mechanical properties of CFRP is shown. The quasi-static tests are in good correlation with results from other researchers by indicating an increase in the maximum tensile stress of the test specimens, cut by remote-laser. The reason is the rearrangement of the shear stresses and a reduction of the notch stress concentration. However, the results of the present study show that excessive expansion of the HAZ leads to a reduction in the maximum tensile stress compared to milled test specimens. Under cyclic load conditions, remote-laser beam cutting does not lead to a more pronounced degradation than milling. The mechanical properties of the notched test pieces are sensitive to the expansion of the HAZ. For the production of components it is therefore necessary that the remote-laser beam cutting is carried out under controlled and documentable conditions. For this purpose, process thermography was tested as a tool for quality assurance. The results show that the technology is basically suitable for this task.
基金Supported by the Postdoctoral Innovation Fund of Shandong Province(201303032)the Independent Innovation Projects of Shandong Province(2012CX20505)the National 863 High Technology Project of the Ministry of Science and Technology of China(2012AA021201)
文摘Biosensors, which are the products of the biotechnology industry, are among the key projects of the 7th, 8th, and 9th Fiveyear Plans of China Science ＆ Technology Developing Programs, respectively, and they play an important role in developing and reforming traditional biotechnology. SBA series biosensor analyzer, as the only one commercial biosensor in China, has attracted lots of attention in the process of information gathering and measurement for biological industry with the development of technology and society. In this paper, we presented an overview of the most important contributions dealing with the monitoring of the biochemical analytes in fermentation processes using SBA series biosensor analyzers in China. Future trends of the biosensor analyzer in China were also mentioned in the last section.
基金Supported by the National High-tech Program of China (No. 2001 AA413110).
文摘Multi-way principal component analysis (MPCA) had been successfully applied to monitoring the batch and semi-batch process in most chemical industry. An improved MPCA approach, step-by-step adaptive MPCA (SAMPCA), using the process variable trajectories to monitoring the batch process is presented in this paper. It does not need to estimate or fill in the unknown part of the process variable trajectory deviation from the current time until the end. The approach is based on a MPCA method that processes the data in a sequential and adaptive manner. The adaptive rate is easily controlled through a forgetting factor that controls the weight of past data in a summation. This algorithm is used to evaluate the industrial streptomycin fermentation process data and is compared with the traditional MPCA. The results show that the method is more advantageous than MPCA, especially when monitoring multi-stage batch process where the latent vector structure can change at several points during the batch.
文摘Shield remote monitoring system is an effective management method in shield construction process, which can be used for unified management of shield machine, timely grasp of shield machine operation status, analysis of shield machine tunneling efficiency. Based on the current function status of the system, this paper expounds how to better play the role of remote monitoring system and provide service for shield construction project management.
基金Supported by the National Natural Science Foundation of China (No.60504033).
文摘Multivariate statistical process control methods have been widely used in biochemical industries. Batch process is usually monitored by the method of multi-way principal component analysis (MPCA). In this article, a new batch process monitoring and fault diagnosis method based on feature extract in Fisher subspace is proposed.The feature vector and the feature direction are extracted by projecting the high-dimension process data onto the low-dimension Fisher space. The similarity of feature vector between the current and the reference batch is calculated for on-line process monitoring and the contribution plot of weights in feature direction is calculated for fault diagnosis. The approach overcomes the need for estimating or tilling in the unknown portion of the process variables trajectories from the current time to the end of the batch. Simulation results on the benchmark model of penicillin fermentation process can demonstrate that in comparison to the MPCA method, the proposed method is more accurate and efficient for process monitoring and fault diagnosis.
文摘In order to reduce the variations of the product quality in batch processes, multivariate statistical process control methods according to multi-way principal component analysis (MPCA) or multi-way projection to latent structure (MPLS) were proposed for on-line batch process monitoring. However, they are based on the decomposition of relative covariance matrix and strongly affected by outlying observations. In this paper, in view of an efficient projection pursuit algorithm, a robust statistical batch process monitoring (RSBPM) framework,which is resistant to outliers, is proposed to reduce the high demand for modeling data. The construction of robust normal operating condition model and robust control limits are discussed in detail. It is evaluated on monitoring an industrial streptomycin fermentation process and compared with the conventional MPCA. The results show that the RSBPM framework is resistant to possible outliers and the robustness is confirmed.
基金the National Natural Science Foundation of China (No.60504033).
文摘Multivariate statistical process control methods have been widely used in biochemical industries. Batch process is usually monitored by the method of multi-way principal component analysis (MPCA). In this article, a new batch process monitoring and fault diagnosis method based on feature extract in Fisher subspace is proposed. The feature vector and the feature direction are extracted by projecting the high-dimension process data onto the low-dimension Fisher space. The similarity of feature vector between the current and the reference batch is calcu- lated for on-line process monitoring and the contribution plot of weights in feature direction is calculated for fault diagnosis. The approach overcomes the need for estimating or filling in the unknown portion of the process vari- ables trajectories from the current time to the end of the batch. Simulation results on the benchmark model of peni- cillin fermentation process can demonstrate that in comparison to the MPCA method, the proposed method is more accurate and efficient for process monitoring and fault diagnosis.
文摘Improving the rail transport security requires development and implementation of neoteric monitoring and control facilities in conditions of increasing speed and intensity of the train movement and high level of terrorist threat. Use of Earth remote sensing (ERS), permitting to obtain information from large areas with a sufficiently high resolution, can provide significant assistance in solving the mentioned problems. This paper discusses the possibility of using various means of remote sensing such as satellites and unmanned aerial vehicles (UAV), also known as drones, for receiving information in different ranges of the electromagnetic spectrum. The paper states that joint using of both these means gives new possibilities in improving railroad security.
文摘In this paper, we introduce a system architecture for a patient centered mobile health monitoring (PCMHM) system that deploys different sensors to determine patients’ activities, medical conditions, and the cause of an emergency event. This system combines and analyzes sensor data to produce the patients’ detailed health information in real-time. A central computational node with data analyzing capability is used for sensor data integration and analysis. In addition to medical sensors, surrounding environmental sensors are also utilized to enhance the interpretation of the data and to improve medical diagnosis. The PCMHM system has the ability to provide on-demand health information of patients via the Internet, track real-time daily activities and patients’ health condition. This system also includes the capability for assessing patients’ posture and fall detection.
文摘Free and open access to the Landsat archive has enabled the implementation of national and global terrestrial monitoring projects.Herein,we summarize a project characterizing the change history of Canada’s forested ecosystems with a time series of data representing 1984-2012.Using the Composite2Change approach,we applied spectral trend analysis to annual best-available-pixel(BAP)surface reflectance image composites produced from Landsat TM and ETM+imagery.A total of 73,544 images were used to produce 29 annual image composites,generating∼400 TB of interim data products and resulting in∼25 TB of annual gap-free reflectance composites and change products.On average,10%of pixels in the annual BAP composites were missing data,with 86%of pixels having data gaps in two consecutive years or fewer.Change detection overall accuracy was 89%.Change attribution overall accuracy was 92%,with higher accuracy for standreplacing wildfire and harvest.Changes were assigned to the correct year with an accuracy of 89%.Outcomes of this project provide baseline information and nationally consistent data source to quantify and characterize changes in forested ecosystems.The methods applied and lessons learned build confidence in the products generated and empower others to develop or refine similar satellite-based monitoring projects.
