Advances in mobile communication bring great effects on people’s life styles.This paper describes the implementation of a remote control scheme,Remote Control System via Bluetooth and SMS(Short Message Service),which...Advances in mobile communication bring great effects on people’s life styles.This paper describes the implementation of a remote control scheme,Remote Control System via Bluetooth and SMS(Short Message Service),which controls smart home in short distance and long distance,respectively.Although SMS is widely used for a variety of applications,it is not suitable for the purpose of remote control because it suffers from transmission delay,loss and lacks of confidentiality.This paper proposes a SMS-based protocol,which is designed with the mechanisms of reliable transmission and information encryption,thus it is capable of the implementation of secure and reliable control.展开更多
In this paper, the iterative learning control problem is considered for a class of remote control system over wireless network communication channel. The control performance of remote iterative learning control （R-IL...In this paper, the iterative learning control problem is considered for a class of remote control system over wireless network communication channel. The control performance of remote iterative learning control （R-ILC） system is analyzed and an error boundary of the stable output of the R-ILC system is obtained for the boundary stochastic noise channel. Finally, we obtain some rules to reduce the fluctuation caused by wireless channel noise through the analysis results for fluctuation boundary. The simulation results prove the proposed rule is correct.展开更多
A remote control system has been developed to deliver stimuli into the rat brain through a wireless micro-stimulator for animal behavior training. The system consists of the following main components： an integrated P...A remote control system has been developed to deliver stimuli into the rat brain through a wireless micro-stimulator for animal behavior training. The system consists of the following main components： an integrated PC control program, a transmitter and a receiver based on Bluetooth （BT） modules, a stimulator controlled by C8051 microprocessor, as well as an operant chamber and an eight-arm radial maze. The micro-stimulator is featured with its changeable amplitude of pulse output for both constant-voltage and constant-current mode, which provides an easy way to set the proper suitable stimulation intensity for different training. The system has been used in behavior experiments for monitoring and recording bar-pressing in the operant chamber, controlling rat roaming in the eight-arm maze, as well as navigating rats through a 3D obstacle route. The results indicated that the system worked stably and that the stimulation was effective for different types of rat behavior controls. In addition, the results showed that stimulation in the whisker barrel region of rat primary somatosensory cortex （SI） acted like a cue. The animals can be trained to take different desired turns upon the association between the SI cue stimulation and the reward stimulation in the medial forehrain bundle （MFB）.展开更多
Physical testing of large-scale ship models at sea is a new experimental method.It is a cheap and reliable way to research the environment adaptability of a ship in complex and extreme wave conditions.It is necessary ...Physical testing of large-scale ship models at sea is a new experimental method.It is a cheap and reliable way to research the environment adaptability of a ship in complex and extreme wave conditions.It is necessary to have a stable experimental system for the test.Since the experimental area is large, a remote control system and a telemetry system are essential, and were designed by the authors.An experiment was conducted on the Songhuajiang River to test the systems.The relationship between the model's speed and its electromotor's revolutions was also measured during the model test.The results showed that the two systems make it possible to carry out large-scale model tests at sea.展开更多
The working principle of radio remote controlling of construction machinery should be that signals of the radio wave from the transmitter obtained in the receiver were controlled and then changed into electronic analo...The working principle of radio remote controlling of construction machinery should be that signals of the radio wave from the transmitter obtained in the receiver were controlled and then changed into electronic analog or digital signals which can be used to drive different actuators and mechanisms of the vehicle.The vehicle could be acted by following the controlling instructions sent by the operator.The best operation mode of construction machinery is suitable not only to manual operating but also to remote controlling in the same vehicle.The design methods of the hydraulic system used for the radio remote controlling of construction machinery are discussed.The design methods of hydraulic circuits for the actuators controlled by solenoid on-off type valves,hydro-electronic multi-way proportional valves,closed loop proportional servo driver or three-way proportional reducing valves are discussed in detail (with real example).The design methods of the power shift transmission of electro-hydraulic controlling,the devices of braking and the directional streering are discussed in this paper.展开更多
We present two protocols for the controlled remote implementation of quantum operations between three-party high-dimensional systems. Firstly, the controlled teleportation of an arbitrary unitary operation by bidirect...We present two protocols for the controlled remote implementation of quantum operations between three-party high-dimensional systems. Firstly, the controlled teleportation of an arbitrary unitary operation by bidirectional quantum state teleportaion （BQST） with high-dimensional systems is considered. Then, instead of using the BQST method, a protocol for controlled remote implementation of partially unknown operations belonging to some restricted sets in high-dimensional systems is proposed. It is shown that, in these protocols, if and only if the controller would like to help the sender with the remote operations, the controlled remote implementation of quantum operations for high-dimensional systems can be completed.展开更多
This paper presents a multi-interface embedded server architecture for remote real-time monitoring system and distributed monitoring applications. In the scheme,an embedded microprocessor( LPC3250 from NXP) is chosen ...This paper presents a multi-interface embedded server architecture for remote real-time monitoring system and distributed monitoring applications. In the scheme,an embedded microprocessor( LPC3250 from NXP) is chosen as the CPU of the embedded server with a linux operation system( OS) environment. The embedded server provides multiple interfaces for supporting various application scenarios. The whole network is based on local area network and adopts the Browser / Server( B / S) model. The monitoring and control node is as a browser endpoint and the remote node with an embedded server is as a server endpoint. Users can easily acquire various sensors information through writing Internet protocol address of remote node on the computer browser. Compared with client / server( C / S) mode,B / S model needs less maintain and can be applicable to large user group. In addition,a simple network management protocol( SNMP) is used for management of devices in Internet protocol( IP) networks. The results of the demonstration experiment show that the proposed system gives good support to manage the network from different user terminals and allows the users to better interact with the ambient environment.展开更多
Our concern is to investigate controlled remote implementation of partially unknown operations with multiple layers.We first propose a scheme to realize the remote implementation of singlequbit operations belonging to...Our concern is to investigate controlled remote implementation of partially unknown operations with multiple layers.We first propose a scheme to realize the remote implementation of singlequbit operations belonging to the restricted sets.Then,the proposed scheme is extended to the case of single-qudit operations.As long as the controller and the higher-layer senders consent,the receiver can restore the desired state remotely operated by the sender.It is worth mentioning that the recovery operation is deduced by general formulas which clearly reveal the relationship with the measurement outcomes.For the sake of clarity,two specific examples with two levels are given respectively.In addition,we discuss the influence of amplitude-damping noise and utilize weak measurement and measurement reversal to effectively resist noise.展开更多
A new inexpensive vineyard protection against hailstorm has been realized and tested. The system has been designed and organized in such a way to perform autonomously local activities to physically control the protect...A new inexpensive vineyard protection against hailstorm has been realized and tested. The system has been designed and organized in such a way to perform autonomously local activities to physically control the protection of the vineyard but also to transmit information toward a remote control. Each row has an ＂umbrella＂ designed by the authors which, unlike other commercial solutions, protects the product without hindering all the mechanical activities typical of a modem vineyard. Locally the single umbrella uses an electronic card for the management and a ZigBee mesh telecommunication network to transmit data to a central control unit which manages the protection. Because of its efficiency, a Raspberry-Pi control card has been chosen as central unit. Finally, a WiMAX connection was chosen to remotely control the system, thus allowing the authors to overcome distance limitations of commercial Wi-Fi networks. The system has been realized and tested for some months in field also during a hailstorm. The results of these tests proved how the system is easy to use and effectively protects against hail; moreover the authors proved the high reliability of the mechanical components which allow the authors to lower the maintenance costs.展开更多
In order to achieve remote control problems for the intelligent home appliances, The paper presents a realization method through the Internet and GSM remote to control appliances of smart home, and given circuit. And ...In order to achieve remote control problems for the intelligent home appliances, The paper presents a realization method through the Internet and GSM remote to control appliances of smart home, and given circuit. And described in detail the hardware and software design of smart home appliances and their control method. Test results show that the system is stable and reliable.展开更多
The paper analyze and design and implement a remote control system based on network. A computer network remote control system mainly includes server, client and the control information. Server registration information...The paper analyze and design and implement a remote control system based on network. A computer network remote control system mainly includes server, client and the control information. Server registration information realize the user command; client provides network hardware, software and other system resources, the system response message and then feedback service instruction; control information transmission layer implementation using TCPflP protocol to control information including control of resources and control commands etc.. This paper adopts centralized network control system model, the structure of the network system realize unified observation, control, coordination, and control of high efficiency. The use of key technologies, such as Socket and COM to realize the goal of computer hardware resource control, software resource management and other functions.展开更多
Traditional air conditioner used to be in local control mode. However, with the development of modern information technology, the control of air conditioner will have to support many more functions. As a first step ...Traditional air conditioner used to be in local control mode. However, with the development of modern information technology, the control of air conditioner will have to support many more functions. As a first step in such a development, we have implemented a remote monitoring system of unitary air conditioners, using the manufacturing message specification (MMS). MMS is an OSI application protocol designed for the remote control and monitoring of real devices. The functions supported are those that an operator would do normally at the console of the unitary air conditioner. Due to the accomplishment of UMCS (Unitary air conditioner MMS Control System), there will be a leap of the application of MMS and the control technology of unitary air conditioner.展开更多
In response to the frequent safety accidents of industrial robots, this paper designs and implements a safety detection system for robot control. It can perform real-time security detection of robot operations on indu...In response to the frequent safety accidents of industrial robots, this paper designs and implements a safety detection system for robot control. It can perform real-time security detection of robot operations on industrial production lines to improve the security and reliability of robot control systems. This paper designs and implements a robot control system based Snort-BASE for real-time online detection of DoS attacks. The system uses a six-degree-of-freedom robotic arm as an example, uses Snort to record the network communication data of the robot arm control system in real time, and filters the network traffic through self-defined rules, and then uses the BASE analysis platform to achieve security analysis of the network traffic. The solution verifies the effectiveness of online real-time detection of attacks and visualisation of attack records by designing simulated robotic arm and real robotic arm attack experiments respectively, thus achieving the security of network communication of the robot remote control system.展开更多
This paper presents the results of an on-going project and investigates modelling and remote control issues of an industry excavator. The details of modelling, communication, and control of a remotely controllable exc...This paper presents the results of an on-going project and investigates modelling and remote control issues of an industry excavator. The details of modelling, communication, and control of a remotely controllable excavator are studied. The paper mainly focuses on trajectory tracking control of the excavator base and robust control of the excavator arm. These will provide the fundamental base for our next research step. In addition, extensive simulation results for trajectory tracking of the excavator base and robust control of the excavator arm are given. Finally, conclusions and further work have been identified.展开更多
Remote control process system with distributed time-delay has attracted much attention in different fields.In this paper,non-linear remote control of a single tank process system with wireless network is considered.To...Remote control process system with distributed time-delay has attracted much attention in different fields.In this paper,non-linear remote control of a single tank process system with wireless network is considered.To deal with the distributed time-delay in a large-scale plant,the time-delay compensation controller based on DCS devices is designed by using operator theory and particle filter.Distributed control system(DCS)device is developed to monitor and control from the central monitoring room to each process.The particle filter is a probabilistic method to estimate unobservable information from observable information.First,remote control system and experimental equipment are introduced.Second,control system based on an operator theory is designed.Then,process system with distributed time-delay using particle filter is carried out.Finally,the actual experiment is conducted by using the proposed time-delay compensation controller.When estimating with the proposed method,the result is close to the case in which the distributed time-delay does not exist.The effectiveness of the proposed control system is confirmed by experiment results.展开更多
This paper addresses the development and testing of a remotely controlled boat platform with an innovative air-ventilated hull. The application of air cavities on the underside of ship hulls is a promising means for r...This paper addresses the development and testing of a remotely controlled boat platform with an innovative air-ventilated hull. The application of air cavities on the underside of ship hulls is a promising means for reducing hydrodynamic drag and pollutant emissions and increasing marine transportation efficiency. Despite this concept＇s potential, design optimization and high-performance operation of novel air-cavity ships remain a challenging problem. Hull construction and sensor instrumentation of the model-scale air-cavity boat is described in the paper. The modular structure of the hull allows for easy modifications, and an electric propulsion unit enables self-propelled operation. The boat is controlled remotely via a radio transmission system. Results of initial tests are reported, including thrust, speed, and airflow rate in several loading conditions. The constructed platform can be used for optimizing air-cavity systems and testing other innovative hull designs. This system can be also developed into a high-performance unmanned boat.展开更多
We present a scheme for symmetric controlled remote preparation of an arbitrary 2-qudit state form a sender to either of the two receivers via positive operator-valued measurement and pure entangled two-particle state...We present a scheme for symmetric controlled remote preparation of an arbitrary 2-qudit state form a sender to either of the two receivers via positive operator-valued measurement and pure entangled two-particle states. The first sender transforms the quantum channel shared by all the agents via POVM according to her knowledge of prepared state. All the senders perform singIe- or two-particle projective measurements on their entangled particles and the receiver can probabilisticaly reconstruct the original state on her entangled particles via unitary transformation and auxiliary qubit. The scheme is optimal as the probability which the receiver prepares the original state equals to the entanglement of the quantum channel. Moreover, it is more convenience in application than others as it requires only two-particle entanglements for preparing an arbitrary two-qudit state.展开更多
Two schemes are proposed to realize the controlled remote preparation of an arbitrary four-qubit cluster-type state via a partially entangled channel. We construct ingenious measurement bases at the sender’s and the ...Two schemes are proposed to realize the controlled remote preparation of an arbitrary four-qubit cluster-type state via a partially entangled channel. We construct ingenious measurement bases at the sender’s and the controller’s locations, which play a decisive role in the proposed schemes. The success probabilities can reach 50% and 100%, respectively. Compared with the previous proposals, the success probabilities are independent of the coefficients of the entangled channel.展开更多
We present a scheme for remotely preparing a state via the controls of many agents in a network.In thescheme,the agents' controls are achieved by utilizing quantum key distribution.Generally,the original state can...We present a scheme for remotely preparing a state via the controls of many agents in a network.In thescheme,the agents' controls are achieved by utilizing quantum key distribution.Generally,the original state can berestored by the receiver with probability 1/2 if all the agents collaborate.However,for certain type of original states therestoration probability is unit.展开更多
Multi-party quantum communication has gradually attracted widespread attention.To realize the perfect transmission of quantum states among multiple participants,a novel multi-party controlled cyclic remote preparation...Multi-party quantum communication has gradually attracted widespread attention.To realize the perfect transmission of quantum states among multiple participants,a novel multi-party controlled cyclic remote preparation protocol for arbitrary single-qubit states with three senders is proposed.With the permission of one controller,each sender can transmit an arbitrary singlequbit state to its neighbor.In addition,we give a universal protocol for multi-party controlled cyclic remote preparation of arbitrary single-qubit states in the case of multiple senders,which can realize deterministic cyclic preparation of multiple quantum states in one direction.The scheme shows that the communication task can be successfully achieved only if all senders cooperate with the controller,and there is no need for the senders to employ information splitting and additional operations before performing measurements.Finally,we discuss the cyclic remote preparation protocol with three senders under five types of noisy environment,and the closeness between the output state and original state is measured by calculating fidelity.展开更多
文摘Advances in mobile communication bring great effects on people’s life styles.This paper describes the implementation of a remote control scheme,Remote Control System via Bluetooth and SMS(Short Message Service),which controls smart home in short distance and long distance,respectively.Although SMS is widely used for a variety of applications,it is not suitable for the purpose of remote control because it suffers from transmission delay,loss and lacks of confidentiality.This paper proposes a SMS-based protocol,which is designed with the mechanisms of reliable transmission and information encryption,thus it is capable of the implementation of secure and reliable control.
基金Project supported by the Innovation Foundation of the Education Commission of Shanghai Municipality (Grant No.09ZZ89)the Shanghai Leading Academic Discipline Project (Grant No.S30108)the Science and Technology Commission of Shanghai Municipality (Grant No.08DZ223110)
文摘In this paper, the iterative learning control problem is considered for a class of remote control system over wireless network communication channel. The control performance of remote iterative learning control （R-ILC） system is analyzed and an error boundary of the stable output of the R-ILC system is obtained for the boundary stochastic noise channel. Finally, we obtain some rules to reduce the fluctuation caused by wireless channel noise through the analysis results for fluctuation boundary. The simulation results prove the proposed rule is correct.
基金Project supported by the Zhejiang University Grant for Multiple Discipline Associated Research, Zhejiang University, China
文摘A remote control system has been developed to deliver stimuli into the rat brain through a wireless micro-stimulator for animal behavior training. The system consists of the following main components： an integrated PC control program, a transmitter and a receiver based on Bluetooth （BT） modules, a stimulator controlled by C8051 microprocessor, as well as an operant chamber and an eight-arm radial maze. The micro-stimulator is featured with its changeable amplitude of pulse output for both constant-voltage and constant-current mode, which provides an easy way to set the proper suitable stimulation intensity for different training. The system has been used in behavior experiments for monitoring and recording bar-pressing in the operant chamber, controlling rat roaming in the eight-arm maze, as well as navigating rats through a 3D obstacle route. The results indicated that the system worked stably and that the stimulation was effective for different types of rat behavior controls. In addition, the results showed that stimulation in the whisker barrel region of rat primary somatosensory cortex （SI） acted like a cue. The animals can be trained to take different desired turns upon the association between the SI cue stimulation and the reward stimulation in the medial forehrain bundle （MFB）.
基金Supported by the National Defense Foundation under Grant No.51414030204CB0109
文摘Physical testing of large-scale ship models at sea is a new experimental method.It is a cheap and reliable way to research the environment adaptability of a ship in complex and extreme wave conditions.It is necessary to have a stable experimental system for the test.Since the experimental area is large, a remote control system and a telemetry system are essential, and were designed by the authors.An experiment was conducted on the Songhuajiang River to test the systems.The relationship between the model's speed and its electromotor's revolutions was also measured during the model test.The results showed that the two systems make it possible to carry out large-scale model tests at sea.
文摘The working principle of radio remote controlling of construction machinery should be that signals of the radio wave from the transmitter obtained in the receiver were controlled and then changed into electronic analog or digital signals which can be used to drive different actuators and mechanisms of the vehicle.The vehicle could be acted by following the controlling instructions sent by the operator.The best operation mode of construction machinery is suitable not only to manual operating but also to remote controlling in the same vehicle.The design methods of the hydraulic system used for the radio remote controlling of construction machinery are discussed.The design methods of hydraulic circuits for the actuators controlled by solenoid on-off type valves,hydro-electronic multi-way proportional valves,closed loop proportional servo driver or three-way proportional reducing valves are discussed in detail (with real example).The design methods of the power shift transmission of electro-hydraulic controlling,the devices of braking and the directional streering are discussed in this paper.
基金Project supported by the National Natural Science Foundation of China (Grant No. 11074088)
文摘We present two protocols for the controlled remote implementation of quantum operations between three-party high-dimensional systems. Firstly, the controlled teleportation of an arbitrary unitary operation by bidirectional quantum state teleportaion （BQST） with high-dimensional systems is considered. Then, instead of using the BQST method, a protocol for controlled remote implementation of partially unknown operations belonging to some restricted sets in high-dimensional systems is proposed. It is shown that, in these protocols, if and only if the controller would like to help the sender with the remote operations, the controlled remote implementation of quantum operations for high-dimensional systems can be completed.
基金Sponsored by the National High Technology Research and Development Program(Grant No.2012AA02A604)
文摘This paper presents a multi-interface embedded server architecture for remote real-time monitoring system and distributed monitoring applications. In the scheme,an embedded microprocessor( LPC3250 from NXP) is chosen as the CPU of the embedded server with a linux operation system( OS) environment. The embedded server provides multiple interfaces for supporting various application scenarios. The whole network is based on local area network and adopts the Browser / Server( B / S) model. The monitoring and control node is as a browser endpoint and the remote node with an embedded server is as a server endpoint. Users can easily acquire various sensors information through writing Internet protocol address of remote node on the computer browser. Compared with client / server( C / S) mode,B / S model needs less maintain and can be applicable to large user group. In addition,a simple network management protocol( SNMP) is used for management of devices in Internet protocol( IP) networks. The results of the demonstration experiment show that the proposed system gives good support to manage the network from different user terminals and allows the users to better interact with the ambient environment.
基金supported by the National Natural Science Foundation of China(Grant Nos.62172341,12071132)the Natural Science Foundation of Henan Province of China(Grant No.242300420276)the Joint Fund of Henan Province Science and Technology R&D Program(Grant No.225200810032)。
文摘Our concern is to investigate controlled remote implementation of partially unknown operations with multiple layers.We first propose a scheme to realize the remote implementation of singlequbit operations belonging to the restricted sets.Then,the proposed scheme is extended to the case of single-qudit operations.As long as the controller and the higher-layer senders consent,the receiver can restore the desired state remotely operated by the sender.It is worth mentioning that the recovery operation is deduced by general formulas which clearly reveal the relationship with the measurement outcomes.For the sake of clarity,two specific examples with two levels are given respectively.In addition,we discuss the influence of amplitude-damping noise and utilize weak measurement and measurement reversal to effectively resist noise.
文摘A new inexpensive vineyard protection against hailstorm has been realized and tested. The system has been designed and organized in such a way to perform autonomously local activities to physically control the protection of the vineyard but also to transmit information toward a remote control. Each row has an ＂umbrella＂ designed by the authors which, unlike other commercial solutions, protects the product without hindering all the mechanical activities typical of a modem vineyard. Locally the single umbrella uses an electronic card for the management and a ZigBee mesh telecommunication network to transmit data to a central control unit which manages the protection. Because of its efficiency, a Raspberry-Pi control card has been chosen as central unit. Finally, a WiMAX connection was chosen to remotely control the system, thus allowing the authors to overcome distance limitations of commercial Wi-Fi networks. The system has been realized and tested for some months in field also during a hailstorm. The results of these tests proved how the system is easy to use and effectively protects against hail; moreover the authors proved the high reliability of the mechanical components which allow the authors to lower the maintenance costs.
文摘In order to achieve remote control problems for the intelligent home appliances, The paper presents a realization method through the Internet and GSM remote to control appliances of smart home, and given circuit. And described in detail the hardware and software design of smart home appliances and their control method. Test results show that the system is stable and reliable.
文摘The paper analyze and design and implement a remote control system based on network. A computer network remote control system mainly includes server, client and the control information. Server registration information realize the user command; client provides network hardware, software and other system resources, the system response message and then feedback service instruction; control information transmission layer implementation using TCPflP protocol to control information including control of resources and control commands etc.. This paper adopts centralized network control system model, the structure of the network system realize unified observation, control, coordination, and control of high efficiency. The use of key technologies, such as Socket and COM to realize the goal of computer hardware resource control, software resource management and other functions.
文摘Traditional air conditioner used to be in local control mode. However, with the development of modern information technology, the control of air conditioner will have to support many more functions. As a first step in such a development, we have implemented a remote monitoring system of unitary air conditioners, using the manufacturing message specification (MMS). MMS is an OSI application protocol designed for the remote control and monitoring of real devices. The functions supported are those that an operator would do normally at the console of the unitary air conditioner. Due to the accomplishment of UMCS (Unitary air conditioner MMS Control System), there will be a leap of the application of MMS and the control technology of unitary air conditioner.
文摘In response to the frequent safety accidents of industrial robots, this paper designs and implements a safety detection system for robot control. It can perform real-time security detection of robot operations on industrial production lines to improve the security and reliability of robot control systems. This paper designs and implements a robot control system based Snort-BASE for real-time online detection of DoS attacks. The system uses a six-degree-of-freedom robotic arm as an example, uses Snort to record the network communication data of the robot arm control system in real time, and filters the network traffic through self-defined rules, and then uses the BASE analysis platform to achieve security analysis of the network traffic. The solution verifies the effectiveness of online real-time detection of attacks and visualisation of attack records by designing simulated robotic arm and real robotic arm attack experiments respectively, thus achieving the security of network communication of the robot remote control system.
文摘This paper presents the results of an on-going project and investigates modelling and remote control issues of an industry excavator. The details of modelling, communication, and control of a remotely controllable excavator are studied. The paper mainly focuses on trajectory tracking control of the excavator base and robust control of the excavator arm. These will provide the fundamental base for our next research step. In addition, extensive simulation results for trajectory tracking of the excavator base and robust control of the excavator arm are given. Finally, conclusions and further work have been identified.
基金Project(K117K06225)supported by JSPS KAKENHI,Japan
文摘Remote control process system with distributed time-delay has attracted much attention in different fields.In this paper,non-linear remote control of a single tank process system with wireless network is considered.To deal with the distributed time-delay in a large-scale plant,the time-delay compensation controller based on DCS devices is designed by using operator theory and particle filter.Distributed control system(DCS)device is developed to monitor and control from the central monitoring room to each process.The particle filter is a probabilistic method to estimate unobservable information from observable information.First,remote control system and experimental equipment are introduced.Second,control system based on an operator theory is designed.Then,process system with distributed time-delay using particle filter is carried out.Finally,the actual experiment is conducted by using the proposed time-delay compensation controller.When estimating with the proposed method,the result is close to the case in which the distributed time-delay does not exist.The effectiveness of the proposed control system is confirmed by experiment results.
基金Foundation item： Supported by the National Science Foundation （CMMI-1026264 and EEC-1157094）.
文摘This paper addresses the development and testing of a remotely controlled boat platform with an innovative air-ventilated hull. The application of air cavities on the underside of ship hulls is a promising means for reducing hydrodynamic drag and pollutant emissions and increasing marine transportation efficiency. Despite this concept＇s potential, design optimization and high-performance operation of novel air-cavity ships remain a challenging problem. Hull construction and sensor instrumentation of the model-scale air-cavity boat is described in the paper. The modular structure of the hull allows for easy modifications, and an electric propulsion unit enables self-propelled operation. The boat is controlled remotely via a radio transmission system. Results of initial tests are reported, including thrust, speed, and airflow rate in several loading conditions. The constructed platform can be used for optimizing air-cavity systems and testing other innovative hull designs. This system can be also developed into a high-performance unmanned boat.
基金Supported by Program for Natural Science Foundation of Guangxi under Grant No. 2011GxNSFB018062, Excellent Talents in Guangxi Higher Education Institutions under Grant No. [2012]41, Key program of Cuangxi University for Nationalities under Grant No. [2011]317 and the Bagui Scholarship Project
文摘We present a scheme for symmetric controlled remote preparation of an arbitrary 2-qudit state form a sender to either of the two receivers via positive operator-valued measurement and pure entangled two-particle states. The first sender transforms the quantum channel shared by all the agents via POVM according to her knowledge of prepared state. All the senders perform singIe- or two-particle projective measurements on their entangled particles and the receiver can probabilisticaly reconstruct the original state on her entangled particles via unitary transformation and auxiliary qubit. The scheme is optimal as the probability which the receiver prepares the original state equals to the entanglement of the quantum channel. Moreover, it is more convenience in application than others as it requires only two-particle entanglements for preparing an arbitrary two-qudit state.
基金supported by the National Natural Science Foundation of China(Grant Nos.61201253,61373131,61572246,and 61502147)PAPDCICAEET funds
文摘Two schemes are proposed to realize the controlled remote preparation of an arbitrary four-qubit cluster-type state via a partially entangled channel. We construct ingenious measurement bases at the sender’s and the controller’s locations, which play a decisive role in the proposed schemes. The success probabilities can reach 50% and 100%, respectively. Compared with the previous proposals, the success probabilities are independent of the coefficients of the entangled channel.
基金Supported by the program for New Century Excellent Talents at the University of China under Grant No.NCET-06-0554the National Natural Science Foundation of China under Grant Nos.60677001,50672001,10874122,and 10747146+2 种基金the Science-Technology Fund of Anhui Province for Outstanding Youth under Grant No.06042087the Key Fund of the Ministry of Education of China under Grant No.206063the Natural Science Foundation of Guangdong Province under Grant Nos.06300345 and 7007806
文摘We present a scheme for remotely preparing a state via the controls of many agents in a network.In thescheme,the agents' controls are achieved by utilizing quantum key distribution.Generally,the original state can berestored by the receiver with probability 1/2 if all the agents collaborate.However,for certain type of original states therestoration probability is unit.
基金the National Natural Science Foundation of China(Nos.62172341,62172196,62272208)。
文摘Multi-party quantum communication has gradually attracted widespread attention.To realize the perfect transmission of quantum states among multiple participants,a novel multi-party controlled cyclic remote preparation protocol for arbitrary single-qubit states with three senders is proposed.With the permission of one controller,each sender can transmit an arbitrary singlequbit state to its neighbor.In addition,we give a universal protocol for multi-party controlled cyclic remote preparation of arbitrary single-qubit states in the case of multiple senders,which can realize deterministic cyclic preparation of multiple quantum states in one direction.The scheme shows that the communication task can be successfully achieved only if all senders cooperate with the controller,and there is no need for the senders to employ information splitting and additional operations before performing measurements.Finally,we discuss the cyclic remote preparation protocol with three senders under five types of noisy environment,and the closeness between the output state and original state is measured by calculating fidelity.
