The burst error of wireless channels and the two-state Markov wireless model are analyzed. Based on this model and the coding modes of the video encoder,the channel distortion of inter-coding and intra-coding due to b...The burst error of wireless channels and the two-state Markov wireless model are analyzed. Based on this model and the coding modes of the video encoder,the channel distortion of inter-coding and intra-coding due to burst error is deduced. Then we propose a novel intra refresh scheme in rate-distortion (R-D) framework. This scheme optimizes the error resilience and coding efficiency of wireless video transmission system. It can also stop error propagation and reduce channel distortion effectively. Simulations under different channel conditions verify the improvements of the proposed scheme with respect to error resilience for wireless video communication.展开更多
We propose a novel prioritized intra refresh method for the wireless video communication.The proposed method considers the characteristics of the human visual system,the error-sensitivity of the bitstream,and the stat...We propose a novel prioritized intra refresh method for the wireless video communication.The proposed method considers the characteristics of the human visual system,the error-sensitivity of the bitstream,and the state of the time-varying wireless channel jointly.An expected perceptual distortion model was used to adjust the intra refresh rate adaptively.This model consists of the perceptual weight map based on an attention model,the bit error probability map based on bitstream size,and the dynamic channel state information(CSI).Experimental results indicate that,compared with other intra refresh methods that consider only the content of the video or the CSI,the proposed method improves the average peak signal-to-noise ratio(PSNR) of the whole frame by about 0.5 dB,and improves the average PSNR of the attention-area by about 0.8 dB.展开更多
随着工艺制程的不断微缩,动态随机存储器(dynamic random access memory,DRAM)的集成度持续提高,单颗芯片上存储单元的数目呈指数增长,随之带来的是芯片发热严重和泄漏电流增大等问题,为了实时监测内部温度并控制相应的刷新操作,DRAM需...随着工艺制程的不断微缩,动态随机存储器(dynamic random access memory,DRAM)的集成度持续提高,单颗芯片上存储单元的数目呈指数增长,随之带来的是芯片发热严重和泄漏电流增大等问题,为了实时监测内部温度并控制相应的刷新操作,DRAM需要在内部集成温度传感器。文章从DRAM的基本结构、工作原理和实际工作中对内置温度传感器的需求出发,研究不同读出架构的集成式温度传感器的优缺点,考虑到感温精度、感温范围、功耗和成本等因素以及DRAM产品规格说明书中对内置温度传感器的要求,设计出一款基于时域读出架构的免校准低功耗温度传感器。采用19 nm的互补金属氧化物半导体(complementary metal oxide semiconductor,CMOS)工艺进行仿真验证,结果表明,免校准的前提下,该温度传感器在0~110℃的感温范围内具有3℃的仿真精度,版图面积为0.189 mm^(2),平均功耗为340.31μW,感温时间为550μs。文章设计的温度传感器满足DRAM对于内置温度传感器的要求,且大大降低了DRAM的生产成本。展开更多
In late May,the city of Dunhuang,a key historical hub of Eastern and Western cultures in Northwest China's Gansu Province,basked in clear and refreshing weather under a brilliant blue sky.The rugged Mingsha Mounta...In late May,the city of Dunhuang,a key historical hub of Eastern and Western cultures in Northwest China's Gansu Province,basked in clear and refreshing weather under a brilliant blue sky.The rugged Mingsha Mountain,renowned for the musical sounds produced by wind-blown sands when the wind blows,stood in silent majesty.To the close north of the mountain's massive golden dunes stood the city's international convention centre,where some 400 vips from 60 countries host cultural exchanges and mutual learning.展开更多
Balancing high display performance with energy efficiency is crucial for global sustainability.Lowering operating frequencies—such as enabling 1 Hz operation in fringe-field switching(FFS)liquid crystal displays—red...Balancing high display performance with energy efficiency is crucial for global sustainability.Lowering operating frequencies—such as enabling 1 Hz operation in fringe-field switching(FFS)liquid crystal displays—reduces power consumption but is hindered by image flicker.While negative dielectric anisotropy liquid crystals(nLCs)mitigate flicker,their high driving voltages and production costs limit adoption.Positive dielectric anisotropy liquid crystals(pLCs)offer lower operating voltages,faster response times,and broader applicability,making them a more viable alternative.This study introduces a novel approach to minimizing flexoelectric effects in pLCs by investigating how single components influence flexoelectric behavior in mixtures through an effective experimental methodology.Two innovative measurement techniques—(1)flexoelectric coefficient difference analysis and(2)displacement-current measurement(DCM)—are presented,marking the first application of DCM for verifying flexoelectric effects.The proposed system eliminates uncertainties associated with previous methods,providing a reliable framework for selecting liquid crystal components with minimal flexoelectric effects while preserving key electro-optic properties.Given pLCs'higher reliability,lower production costs,and broader material selection,these advancements hold significant potential for low-power displays.We believe this work enhances flexoelectric analysis in nematic liquid crystals and contributes to sustainable innovation in the display industry,aligning with global energy-saving goals.展开更多
尽管第14代酷睿处理器曾存在不稳定的问题,但由于英特尔后续推出了用于补救的BIOS,且把处理器质保时间延长至5年,并大幅降价,令产品性价比爆棚,就像酷睿i7-14700KF。这款处理器采用经过更新的Raptor Lake S Refresh架构,相对第13代酷睿i...尽管第14代酷睿处理器曾存在不稳定的问题,但由于英特尔后续推出了用于补救的BIOS,且把处理器质保时间延长至5年,并大幅降价,令产品性价比爆棚,就像酷睿i7-14700KF。这款处理器采用经过更新的Raptor Lake S Refresh架构,相对第13代酷睿i7的8P+8E配置,它采用8P+12E的配置,多了4颗能效核核心。展开更多
A dual-resolution（DR） version of a regional ensemble Kalman filter（EnKF）-3D ensemble variational（3DEnVar） coupled hybrid data assimilation system is implemented as a prototype for the operational Rapid Refresh f...A dual-resolution（DR） version of a regional ensemble Kalman filter（EnKF）-3D ensemble variational（3DEnVar） coupled hybrid data assimilation system is implemented as a prototype for the operational Rapid Refresh forecasting system. The DR 3DEnVar system combines a high-resolution（HR） deterministic background forecast with lower-resolution（LR） EnKF ensemble perturbations used for flow-dependent background error covariance to produce a HR analysis. The computational cost is substantially reduced by running the ensemble forecasts and EnKF analyses at LR. The DR 3DEnVar system is tested with 3-h cycles over a 9-day period using a 40/13-km grid spacing combination. The HR forecasts from the DR hybrid analyses are compared with forecasts launched from HR Gridpoint Statistical Interpolation（GSI） 3D variational（3DVar）analyses, and single LR hybrid analyses interpolated to the HR grid. With the DR 3DEnVar system, a 90% weight for the ensemble covariance yields the lowest forecast errors and the DR hybrid system clearly outperforms the HR GSI 3DVar.Humidity and wind forecasts are also better than those launched from interpolated LR hybrid analyses, but the temperature forecasts are slightly worse. The humidity forecasts are improved most. For precipitation forecasts, the DR 3DEnVar always outperforms HR GSI 3DVar. It also outperforms the LR 3DEnVar, except for the initial forecast period and lower thresholds.展开更多
The paper presents the research results of using an innovative method to reclaim the waste moulding sands containing water glass. Two of the examined processes are connected with "dry" or "wet" act...The paper presents the research results of using an innovative method to reclaim the waste moulding sands containing water glass. Two of the examined processes are connected with "dry" or "wet" activation of inorganic binder in waste moulding sand mixtures physically hardened by microwave radiation. The sand mixtures consisting of high-silica sand and water-glass with average molar module 2.5, were subjected to the following cyclical process: mixing the components, compacting, microwave heating, cooling-down, thermally loading the mould to 800 °C, cooling-down to ambient temperature, and knocking-out. After being knocked-out, the waste moulding sands were subjected to either dry or wet activation of the binder. To activate thermally treated inorganic binder, each of the examined processes employed the surface phenomenon usually associated to mechanical reclamation. The study also covered possible use of some elements of wet reclamation to rehydrate waste binder. To evaluate the effectiveness of the two proposed methods of waste binder activation, selected strength and technological parameters were measured. After each subsequent processing cycle, the permeability, tensile strength and bending strength were determined. In addition, the surface of activated sand grains was examined with a scanning electron microscope. Analysis of the results indicates that it is possible to re-activate the used binder such as sodium silicate, and to stabilize the strength parameters in both activation processes. Permeability of the refreshed moulding sands strongly depends on the surface condition of high-silica grains. The wet activation process by wetting and buffering knocked-out moulding sands in closed humid environment makes it possible to reduce the content of refreshing additive in water-glass. The moulding sands cyclically prepared in both processes do not require the addition of fresh high-silica sand. The relatively high quality achieved in the refreshed moulding sands allows them to be reused for manufacture of next moulds. Thus, the two proposed methods for cyclically processing used moulding sands containing sodium silicate, subject to microwave hardening, are suitable for economic and ecological circulation moulding mixtures.展开更多
The partial cycle(PC)strategy has been used in many rapid refresh cycle systems(RRC)for regional short-range weather forecasting.Since the strategy periodically reinitializes the regional model(RM)from the global mode...The partial cycle(PC)strategy has been used in many rapid refresh cycle systems(RRC)for regional short-range weather forecasting.Since the strategy periodically reinitializes the regional model(RM)from the global model(GM)forecasts to correct the large-scale drift,it has replaced the traditional full cycle(FC)strategy in many RRC systems.However,the extra spin-up in the PC strategy increases the computer burden on RRC and generates discontinuous smallscale systems among cycles.This study returns to the FC strategy but with initial fields generated by dynamic blending(DB)and data assimilation(DA).The DB ingests the time-varied large-scale information from the GM to the RM to generate less-biased background fields.Then the DA is performed.We applied the new FC strategy in a series of 7-day batch forecasts with the 3-hour cycle in July 2018,and February,April,and October 2019 over China using a Weather Research and Forecast(WRF)model-based RRC.A comparison shows that the new FC strategy results in less model bias than the PC strategy in most state variables and improves the forecast skills for moderate and light precipitation.The new FC strategy also allows the model to reach a balanced state earlier and gives favorable forecast continuity between adjacent cycles.Hence,this new FC strategy has potential to be applied in RRC forecast systems to replace the currently used PC strategy.展开更多
The recently reported quasi-nonvolatile memory based on semi-floating gate architecture has attracted extensive attention thanks to its potential to bridge the large gap between volatile and nonvolatile memory.However...The recently reported quasi-nonvolatile memory based on semi-floating gate architecture has attracted extensive attention thanks to its potential to bridge the large gap between volatile and nonvolatile memory.However,the further extension of the refresh time in quasi-nonvolatile memory is limited by the charge leakage through the p-n junction.Here,based on the density of states engineered van der Waals heterostructures,the leakage of electrons from the floating gate to the channel is greatly suppressed.As a result,the refresh time is effectively extended to more than 100 s,which is the longest among all previously reported quasi-nonvolatile memories.This work provides a new idea to enhance the refresh time of quasi-nonvolatile memory by the density of states engineering and demonstrates great application potential for high-speed and low-power memory technology.展开更多
文摘The burst error of wireless channels and the two-state Markov wireless model are analyzed. Based on this model and the coding modes of the video encoder,the channel distortion of inter-coding and intra-coding due to burst error is deduced. Then we propose a novel intra refresh scheme in rate-distortion (R-D) framework. This scheme optimizes the error resilience and coding efficiency of wireless video transmission system. It can also stop error propagation and reduce channel distortion effectively. Simulations under different channel conditions verify the improvements of the proposed scheme with respect to error resilience for wireless video communication.
文摘We propose a novel prioritized intra refresh method for the wireless video communication.The proposed method considers the characteristics of the human visual system,the error-sensitivity of the bitstream,and the state of the time-varying wireless channel jointly.An expected perceptual distortion model was used to adjust the intra refresh rate adaptively.This model consists of the perceptual weight map based on an attention model,the bit error probability map based on bitstream size,and the dynamic channel state information(CSI).Experimental results indicate that,compared with other intra refresh methods that consider only the content of the video or the CSI,the proposed method improves the average peak signal-to-noise ratio(PSNR) of the whole frame by about 0.5 dB,and improves the average PSNR of the attention-area by about 0.8 dB.
文摘随着工艺制程的不断微缩,动态随机存储器(dynamic random access memory,DRAM)的集成度持续提高,单颗芯片上存储单元的数目呈指数增长,随之带来的是芯片发热严重和泄漏电流增大等问题,为了实时监测内部温度并控制相应的刷新操作,DRAM需要在内部集成温度传感器。文章从DRAM的基本结构、工作原理和实际工作中对内置温度传感器的需求出发,研究不同读出架构的集成式温度传感器的优缺点,考虑到感温精度、感温范围、功耗和成本等因素以及DRAM产品规格说明书中对内置温度传感器的要求,设计出一款基于时域读出架构的免校准低功耗温度传感器。采用19 nm的互补金属氧化物半导体(complementary metal oxide semiconductor,CMOS)工艺进行仿真验证,结果表明,免校准的前提下,该温度传感器在0~110℃的感温范围内具有3℃的仿真精度,版图面积为0.189 mm^(2),平均功耗为340.31μW,感温时间为550μs。文章设计的温度传感器满足DRAM对于内置温度传感器的要求,且大大降低了DRAM的生产成本。
文摘In late May,the city of Dunhuang,a key historical hub of Eastern and Western cultures in Northwest China's Gansu Province,basked in clear and refreshing weather under a brilliant blue sky.The rugged Mingsha Mountain,renowned for the musical sounds produced by wind-blown sands when the wind blows,stood in silent majesty.To the close north of the mountain's massive golden dunes stood the city's international convention centre,where some 400 vips from 60 countries host cultural exchanges and mutual learning.
基金supported by Basic Science Research Program through the National Research Foundation(NRF)of Korea,funded by the Ministry of Science and ICT(MSIT),Korea[2022R1A2C2091671]by ITECH R&D Program of MOTIE/KEIT(Ministry of Trade,Industry&Energy/Korea Evaluation Institute of Industrial Technology)[20016808].
文摘Balancing high display performance with energy efficiency is crucial for global sustainability.Lowering operating frequencies—such as enabling 1 Hz operation in fringe-field switching(FFS)liquid crystal displays—reduces power consumption but is hindered by image flicker.While negative dielectric anisotropy liquid crystals(nLCs)mitigate flicker,their high driving voltages and production costs limit adoption.Positive dielectric anisotropy liquid crystals(pLCs)offer lower operating voltages,faster response times,and broader applicability,making them a more viable alternative.This study introduces a novel approach to minimizing flexoelectric effects in pLCs by investigating how single components influence flexoelectric behavior in mixtures through an effective experimental methodology.Two innovative measurement techniques—(1)flexoelectric coefficient difference analysis and(2)displacement-current measurement(DCM)—are presented,marking the first application of DCM for verifying flexoelectric effects.The proposed system eliminates uncertainties associated with previous methods,providing a reliable framework for selecting liquid crystal components with minimal flexoelectric effects while preserving key electro-optic properties.Given pLCs'higher reliability,lower production costs,and broader material selection,these advancements hold significant potential for low-power displays.We believe this work enhances flexoelectric analysis in nematic liquid crystals and contributes to sustainable innovation in the display industry,aligning with global energy-saving goals.
文摘尽管第14代酷睿处理器曾存在不稳定的问题,但由于英特尔后续推出了用于补救的BIOS,且把处理器质保时间延长至5年,并大幅降价,令产品性价比爆棚,就像酷睿i7-14700KF。这款处理器采用经过更新的Raptor Lake S Refresh架构,相对第13代酷睿i7的8P+8E配置,它采用8P+12E的配置,多了4颗能效核核心。
基金supported by the National Natural Science Foundation of China (Grant Nos.41730965,41775099 and 2017YFC1502104)PAPD (the Priority Academic Program Development of Jiangsu Higher Education Institutions)
文摘A dual-resolution（DR） version of a regional ensemble Kalman filter（EnKF）-3D ensemble variational（3DEnVar） coupled hybrid data assimilation system is implemented as a prototype for the operational Rapid Refresh forecasting system. The DR 3DEnVar system combines a high-resolution（HR） deterministic background forecast with lower-resolution（LR） EnKF ensemble perturbations used for flow-dependent background error covariance to produce a HR analysis. The computational cost is substantially reduced by running the ensemble forecasts and EnKF analyses at LR. The DR 3DEnVar system is tested with 3-h cycles over a 9-day period using a 40/13-km grid spacing combination. The HR forecasts from the DR hybrid analyses are compared with forecasts launched from HR Gridpoint Statistical Interpolation（GSI） 3D variational（3DVar）analyses, and single LR hybrid analyses interpolated to the HR grid. With the DR 3DEnVar system, a 90% weight for the ensemble covariance yields the lowest forecast errors and the DR hybrid system clearly outperforms the HR GSI 3DVar.Humidity and wind forecasts are also better than those launched from interpolated LR hybrid analyses, but the temperature forecasts are slightly worse. The humidity forecasts are improved most. For precipitation forecasts, the DR 3DEnVar always outperforms HR GSI 3DVar. It also outperforms the LR 3DEnVar, except for the initial forecast period and lower thresholds.
基金co-financed by the European Union within the European Social Fund in the project"Mloda Kadra 2015+"
文摘The paper presents the research results of using an innovative method to reclaim the waste moulding sands containing water glass. Two of the examined processes are connected with "dry" or "wet" activation of inorganic binder in waste moulding sand mixtures physically hardened by microwave radiation. The sand mixtures consisting of high-silica sand and water-glass with average molar module 2.5, were subjected to the following cyclical process: mixing the components, compacting, microwave heating, cooling-down, thermally loading the mould to 800 °C, cooling-down to ambient temperature, and knocking-out. After being knocked-out, the waste moulding sands were subjected to either dry or wet activation of the binder. To activate thermally treated inorganic binder, each of the examined processes employed the surface phenomenon usually associated to mechanical reclamation. The study also covered possible use of some elements of wet reclamation to rehydrate waste binder. To evaluate the effectiveness of the two proposed methods of waste binder activation, selected strength and technological parameters were measured. After each subsequent processing cycle, the permeability, tensile strength and bending strength were determined. In addition, the surface of activated sand grains was examined with a scanning electron microscope. Analysis of the results indicates that it is possible to re-activate the used binder such as sodium silicate, and to stabilize the strength parameters in both activation processes. Permeability of the refreshed moulding sands strongly depends on the surface condition of high-silica grains. The wet activation process by wetting and buffering knocked-out moulding sands in closed humid environment makes it possible to reduce the content of refreshing additive in water-glass. The moulding sands cyclically prepared in both processes do not require the addition of fresh high-silica sand. The relatively high quality achieved in the refreshed moulding sands allows them to be reused for manufacture of next moulds. Thus, the two proposed methods for cyclically processing used moulding sands containing sodium silicate, subject to microwave hardening, are suitable for economic and ecological circulation moulding mixtures.
基金the two anonymous reviewers.This work is supported by the National Key R&D Program of China(2018YFC1506803,2019YFB2102901)National Natural Science Foundation of China(Grant 41705135,41790474).
文摘The partial cycle(PC)strategy has been used in many rapid refresh cycle systems(RRC)for regional short-range weather forecasting.Since the strategy periodically reinitializes the regional model(RM)from the global model(GM)forecasts to correct the large-scale drift,it has replaced the traditional full cycle(FC)strategy in many RRC systems.However,the extra spin-up in the PC strategy increases the computer burden on RRC and generates discontinuous smallscale systems among cycles.This study returns to the FC strategy but with initial fields generated by dynamic blending(DB)and data assimilation(DA).The DB ingests the time-varied large-scale information from the GM to the RM to generate less-biased background fields.Then the DA is performed.We applied the new FC strategy in a series of 7-day batch forecasts with the 3-hour cycle in July 2018,and February,April,and October 2019 over China using a Weather Research and Forecast(WRF)model-based RRC.A comparison shows that the new FC strategy results in less model bias than the PC strategy in most state variables and improves the forecast skills for moderate and light precipitation.The new FC strategy also allows the model to reach a balanced state earlier and gives favorable forecast continuity between adjacent cycles.Hence,this new FC strategy has potential to be applied in RRC forecast systems to replace the currently used PC strategy.
基金This work was supported by the National Natural Science Foundation of China(61925402,61851402 and 61734003)Science and Technology Commission of Shanghai Municipality(19JC1416600)+2 种基金National Key Research and Development Program(2017YFB0405600)Shanghai Education Development Foundation and Shanghai Municipal Education Commission Shuguang Program(18SG01)China Postdoctoral Science Foundation(2019M661358,2019TQ0065).
文摘The recently reported quasi-nonvolatile memory based on semi-floating gate architecture has attracted extensive attention thanks to its potential to bridge the large gap between volatile and nonvolatile memory.However,the further extension of the refresh time in quasi-nonvolatile memory is limited by the charge leakage through the p-n junction.Here,based on the density of states engineered van der Waals heterostructures,the leakage of electrons from the floating gate to the channel is greatly suppressed.As a result,the refresh time is effectively extended to more than 100 s,which is the longest among all previously reported quasi-nonvolatile memories.This work provides a new idea to enhance the refresh time of quasi-nonvolatile memory by the density of states engineering and demonstrates great application potential for high-speed and low-power memory technology.
