The propagation of elastic waves is studied in a porous solid saturated with two immiscible viscous fluids. The propagation of three longitudinal waves is represented through three scalar potential functions. The lone...The propagation of elastic waves is studied in a porous solid saturated with two immiscible viscous fluids. The propagation of three longitudinal waves is represented through three scalar potential functions. The lone transverse wave is presented by a vector potential function. The displacements of particles in different phases of the aggregate are defined in terms of these potential functions. It is shown that there exist three longitudinal waves and one transverse wave. The phenomena of reflection and refraction due to longitudinal and transverse waves at a plane interface between an elastic solid half-space and a porous solid half-space saturated with two immiscible viscous fluids are investigated. For the presence of viscosity in pore-fluids, the waves refracted to the porous medium attenuate in the direction normal to the interface. The ratios of the amplitudes of the reflected and refracted waves to that of the incident wave are calculated as a non- singular system of linear algebraic equations. These amplitude ratios are used to further calculate the shares of different scattered waves in the energy of the incident wave. The modulus of the amplitude and the energy ratios with the angle of incidence are computed for a particular numerical model. The conservation of the energy across the interface is verified. The effects of variations in non-wet saturation of pores and frequencies on the energy partition are depicted graphically and discussed,展开更多
Phenomena of reflection and refraction of plane harmonic waves at a plane interface between an elastic solid and doubleporosity dual-permeability material are investigated. The elastic solid behaves non-dissipatively,...Phenomena of reflection and refraction of plane harmonic waves at a plane interface between an elastic solid and doubleporosity dual-permeability material are investigated. The elastic solid behaves non-dissipatively, while double-porosity dual-permeability materials behave dissipatively to wave propagation due to the presence of viscosity in pore fluids. All the waves(i.e., incident and reflected) in an elastic medium are considered as homogeneous(i.e., having the same directions of propagation and attenuation), while all the refracted waves in double-porosity dual-permeability materials are inhomogeneous(i.e., having different directions of propagation and attenuation). The coefficients of reflection and refraction for a given incident wave are obtained as a non-singular system of linear equations. The energy shares of reflected and refracted waves are obtained in the form of an energy matrix. A numerical example is considered to calculate the partition of incident energy among various reflected and refracted waves. The effect of incident direction on the partition of the incident energy is analyzed with a change in wave frequency, wave-induced fluid-flow, pore-fluid viscosity and double-porosity structure.It has been confirmed from numerical interpretation that during the reflection/refraction process, conservation of incident energy is obtained at each angle of incidence.展开更多
Abnormal refraction and reflection refers to the phenomenon in which light does not follow its traditional laws of propagation and instead is subject to refraction and reflection at abnormal angles that satisfy a gene...Abnormal refraction and reflection refers to the phenomenon in which light does not follow its traditional laws of propagation and instead is subject to refraction and reflection at abnormal angles that satisfy a generalization of Snell’s law.Metasurfaces can realize this phenomenon through appropriate selection of materials and structural design,and they have a wide range of potential applications in the military,communications,scientific,and biomedical fields.This paper summarizes the current state of research on abnormal refractive and reflective metasurfaces and their application scenarios.It discusses types of abnormal refractive and reflective metasurfaces based on their tuning modes(active and passive),their applications in different wavelength bands,and their future development.The technical obstacles that arise with existing metasurface technology are summarized,and prospects for future development and applications of abnormal refractive and reflective metasurfaces are discussed.展开更多
In order to investigate the interrelations of crust and upper mantle tectonics and its velocity distribution as well as seismicity in the Yanhuai basin and its surrounding area, a nearly EW trending Beijing Huailai ...In order to investigate the interrelations of crust and upper mantle tectonics and its velocity distribution as well as seismicity in the Yanhuai basin and its surrounding area, a nearly EW trending Beijing Huailai Fengzhen wide angle reflection/refraction profile, which obliquely passes through seismic zone of Zhangjiakou Bohai Sea and coincides with a deep reflection profile in the Yanhuai basin, was completed recently. The results show: The crust presents layered structures and its thickness gradually increases from 35.0 km in Shunyi to 42.0 km in the west end of the profile; the interior crustal interfaces appear approximately horizontal or slowly sloping down from east to west; In the Yanhuai basin, the crust presents the characteristics of higher velocities alternating with the lower ones and the low velocity bodies obviously exist in the lower part of upper crust. Moreover, there are two deep crustal fault zones which stretch to the Moho discontinuity, are closely related with the seismicity in the Yanhuai area.展开更多
We present crustal models for seismic P-waves(Vp),S-waves(Vs)and the Vp/Vs ratio across the southern North China Craton along latitude 36°N.Our results are based on inverse and forward modeling of long-range wide...We present crustal models for seismic P-waves(Vp),S-waves(Vs)and the Vp/Vs ratio across the southern North China Craton along latitude 36°N.Our results are based on inverse and forward modeling of long-range wide-angle reflection/refraction data.The crust of the southern Ordos Block has high lower crustal velocity(7.0 km/s)and a Moho depth of~42 km.In contrast,thick sediments and a lower average velocity(compared with the Ordos block)found underneath the Shanxi Graben are likely to be the products of rifting that has occurred since the Cenozoic.Steep Moho dips,exposed basement rock and higher average crustal velocity beneath the Lüliang Mountain and the Taihang Mountain are characteristic of an orogenic belt.The Tanlu fault and the Liaocheng-Lankao fault show sharp crustal velocity variations and a Moho offset.This seismic profile sampled the entire region of the Eastern North China Craton where the cratonic root has been destroyed and the unique crustal structure is correlated with the substantially modified lithosphere.Our crustal seismic velocity model shows a strong correspondence between surface geology,local tectonics and the deep crustal structure.展开更多
The marginal sea and back-arc basins in the Western Pacific Ocean have become the focus of tectonics due to their unique tectonic location.To understand the deep crustal structure in the back-arc region,we present a 5...The marginal sea and back-arc basins in the Western Pacific Ocean have become the focus of tectonics due to their unique tectonic location.To understand the deep crustal structure in the back-arc region,we present a 545-kmlong active-source ocean bottom seismometer(OBS)wide-angle reflection/refraction profile in the East China Sea.The P wave velocity model shows that the Moho depth rises significantly,from approximately 30 km in the East China Sea shelf to approximately 16 km in the axis of the Okinawa Trough.The lower crustal high-velocity zone(HVZ)in the southern Okinawa Trough,with V_(p) of 6.8-7.3 km/s,is a remarkable manifestation of the mantle material upwelling and accretion to the lower crust.This confirms that the lower crustal high-velocity mantle accretion is developed in the southern Okinawa Trough.During the process of back-arc extension,the crustal structure of the southern Okinawa Trough is completely invaded and penetrated by the upper mantle material in the axis region.In some areas of the southern central graben,the crust may has broken up and entered the initial stage of seafloor spreading.The discontinuous HVZs in the lower crust in the back-arc region also indicate the migration of spreading centers in the back-arc region since the Cenozoic.The asthenosphere material upwelling in the continent-ocean transition zone is constantly driving the lithosphere eastward for episodic extension,and is causing evident tectonic migration in the Western Pacific back-arc region.展开更多
The relationship of the crustal contact between the Indian and Eurasian plates is a key issue in understanding crustal thickening and the subduction of the Indian lithosphere beneath the Qinghai-Tibetan Plateau.Across...The relationship of the crustal contact between the Indian and Eurasian plates is a key issue in understanding crustal thickening and the subduction of the Indian lithosphere beneath the Qinghai-Tibetan Plateau.Across the middle of the Yarlung-Zangbo Suture(YZS),we deployed an~450-km-long SN-trending wide-angle reflection/refraction profile to observe the P-wave velocity(vP)structure beneath the northern Himalaya and the southern plateau.Our results show that,1.the high vP(~7.1 km/s)indicates that the Indian lower crust extends no more than 50 km north of the YZS.2.The lower crust beneath the southern part of the plateau features an extremely low vP(<6.7±0.2 km/s).3.Compared with the velocities of several typical crustal lithologies in different temperature regimes,the low vPin the lower crust can be explained by felsic-intermediate granulite,which has prevented the lower crust from further eclogitization.We propose that the dip angle of the Indian lithospheric slab beneath the YZS is partly controlled by the composition of the lower crust of the plateau.In the northern middle YZS,the crust of the southern plateau is too thick and blocks the northward advancement of the Indian lower crust,resulting in the subduction of the Indian lithospheric slab into the upper mantle.The lower crust in western and eastern Lhasa is dominated by a mafic composition,and it was delaminated after eclogitization before the Miocene.The void zone generated by delamination favors the flattening and underthrusting of the Indian lower crust.展开更多
The Zhangzhou basin is located at the middle section of the southeast coast seismic zone of the mainland of China. Using high-resolution refraction and wide-angle reflection/refraction seismic profiling of Zhangzhou b...The Zhangzhou basin is located at the middle section of the southeast coast seismic zone of the mainland of China. Using high-resolution refraction and wide-angle reflection/refraction seismic profiling of Zhangzhou basin and its vicinity, we have obtained the crustal geometric structure and velocity structure as well as the geometric configuration and structural relationship between the deep and shallow fractures. The results show that the crust in the region is divided into the upper crust and lower crust. The thickness of the upper crust is 16.5km- 18.8km, and that of the lower crust is 12.0km- 13.0km. The upper crust is further divided into an upper and lower section. In the lower section of the upper crust, there is a low-velocity layer with a velocity of about 6.00km/s; the depth of the top surface of the low-velocity layer is about 12.0km, and the thickness is about 5.0km. The lower crust is also divided into an upper and lower section. The depth of Moho is 29.0km- 31 .8km There are 6 normal faults in the shallow crust in this region, and most of them extend downwards to a depth of less than 4kin, the maximum depth is about 5km. Below the shallow normal faults, there is a conjectural high-dip angle deep fault zone. The fault zone extends downwards till the Moho and upwards into the low-velocity layer in lower section of the upper crust. The deep and shallow faults are not tectonically connected. The combination character of deep and shallow structures in the Zhangzhou basin indicates that the Jiulongjiang fault zone is a deep fault zone with distinct characteristics and a complex deep and shallow structure background. The acquisition of deep seismic exploration results obviously enhanced the reliability of explanation of deep-structural data and the exploration precision of the region. The combination of deep and shallow structures resulted in uniform explanation results. The delamination of the crust and the characteristic of the structures are more precise and explicit. We discovered for the first time the combination characteristics of extensional structures and listric faults in the upper crust. This is not only helpful to the integrative judgment of earthquake risk in Zhangzhou and its vicinity, but also of importance for deepening the knowledge of deep dynamic processes in the southeast coast seismic zone.展开更多
The crustal basement of Northwest Germany can be interpreted as an “Avalonian Terrane Assemblage” subdivided by a roughly NW-SE (Hercynian) and SW-NE (Rhenish) running horst and graben system. In Late Devonian and E...The crustal basement of Northwest Germany can be interpreted as an “Avalonian Terrane Assemblage” subdivided by a roughly NW-SE (Hercynian) and SW-NE (Rhenish) running horst and graben system. In Late Devonian and Early Carboniferous times, this assemblage was flooded by the sea and mainly marine carbonates were deposited on the horsts and Stillwater shales in the grabens, as interpretable through magnetotelluric measurements. Dur</span><span style="font-family:Verdana;">ing the Late Carboniferous Variscan Orogeny, this terrain became the </span><span style="font-family:Verdana;">coal-rich </span><span style="font-family:Verdana;">foreland of the colliding Rhenohercynian belt. The shale-filled grabens </span><span style="font-family:Verdana;">reacted </span><span style="font-family:Verdana;">through folding and thrusting with different anticlinal patterns, the main</span><span style="font-family:Verdana;"> carbonate covered horst in a still unknown way. This horst was the location of the Late Carboniferous basin center and of the inverted oil-rich Mesozoic Lower Saxony Basin (southwestern sector), respectively, with the so-called Bramsche Massif therein. It probably acted as an indenter for the evolution of the Variscan ore-rich Harz Mountains and forced the approaching Rhenohercynian orogen to stack the appropriate tectonic nappes by horizontal shortening to very high altitudes and the root into large depths. Based on seismic evidence this root is still an uncompleted crust/mantle transition zone with a deep reflection seismic and petrological Moho and a shallower hardly reflecting refraction seismic velocity Moho. The alternative, partly unsolved location of the Variscan Deformation Front in Northwest Germany may represent the new findings. The results may be supported by a comparison with features of the northern Alpine deformation belt.展开更多
The propagation characteristics of impact waves across a planar interface between a ceramic layer and a ceramic/metal(C/M) composite layer were investigated. Two interfacial boundary conditions were considered: one wa...The propagation characteristics of impact waves across a planar interface between a ceramic layer and a ceramic/metal(C/M) composite layer were investigated. Two interfacial boundary conditions were considered: one was a shear coupling boundary condition that simulated a perfectly bonded interface between the ceramic and composite, and the other was a slip boundary condition that only allowed a transmission of the transverse motion and normal stress at the interface. The ceramic was subjected to an incident impact wave. The ceramic and composite was assumed to be elastic during impact. The study was based on a basic method provided by Furlong, Westburg and Phillips for predicting the reflection and refraction of spherical waves across a planar interface separating two elastic solids. Emphasis was put on the effect of the metal volume fraction in the composite, ceramic thickness and interfacial boundary condition on the reflected waves. New and interesting results are obtained that provide a very useful guidance for design of a ceramic/composite armor and of a C/M functionally graded appliqué.展开更多
The fine structure of crust mantle transition zone in Yanqing Hailai(Yan Huai basin) basin has been analyzed and discussed by using the data of Yanqing Hailai deep seismic reflection profile and Beijing Huailai ...The fine structure of crust mantle transition zone in Yanqing Hailai(Yan Huai basin) basin has been analyzed and discussed by using the data of Yanqing Hailai deep seismic reflection profile and Beijing Huailai Fengzhen deep seismic sounding profile obtained respectively in 1992 and in 1993. The primary model is established based on CDP stacking profile. The phases of seismic refraction waves and wide angle reflection waves are analyzed, travel time inversion is carried out and 2 D ray tracing is computed. Synthetic seismograms are completed by using re flectivity method for waveform fitting of phases P M and P M′, they are reflection waves from both the upper and the lower boundaries of the crust mantle transition zone in this basin. The results show that the P M′ reflection waves are stronger at some points and come from the lower boundary of Moho discontinuity. It is confirmed and inter preted that the Moho discontinuity in Yanqing Hailai basin consists of a group of thin layers with alternatively higher and lower velocities.展开更多
In this paper, the typical velocity structures and average velocities of the crust in six different active tectonic block regions are presented on the basis of previous studies and their tectonic implications are disc...In this paper, the typical velocity structures and average velocities of the crust in six different active tectonic block regions are presented on the basis of previous studies and their tectonic implications are discussed. The results show that different tectonic units have different features of crustal velocity structures. In general, there are low velocity distributions in the crust in regions with strong tectonic activities, and the scales of low velocity distributions are related to the tectonic activities. The average velocities are relatively low in such regions. This reflects strong crustal deformation and the variations of states of matter in the crust resulting from strong tectonic movements. These regions are also seismically active zones frequented by strong earthquakes. Therefore, studying crustal velocity structures of these regions is of great importance to understanding crustal geodynamic process and seismogenic tectonic background.展开更多
A general solution is obtained to a canonical problem of the reflection and refraction of an arbitrary shaped beam by using a uniaxially anisotropic chiral slab.The reflected,internal as well as refracted shaped beams...A general solution is obtained to a canonical problem of the reflection and refraction of an arbitrary shaped beam by using a uniaxially anisotropic chiral slab.The reflected,internal as well as refracted shaped beams are expanded in terms of cylindrical vector wave functions,and the expansion coefficients are determined by using the boundary conditions and method of moments procedure.As two typical examples,the normalized field intensity distributions are evaluated for a fundamental Gaussian beam and Hermite-Gaussian beam,and some propagation properties,especially the negative refraction phenomenon,are discussed briefly.展开更多
We present the 1-D crustal velocity structure of the major tectonic blocks of the North China Craton(NCC)along 36°N based on synthetic seismogram modeling of long-range wide-angle reflection/refraction data.This ...We present the 1-D crustal velocity structure of the major tectonic blocks of the North China Craton(NCC)along 36°N based on synthetic seismogram modeling of long-range wide-angle reflection/refraction data.This profile extends from southwest Yan’an of central Shaanxi Province of China(109.47°E),across the southern Trans-North China Orogen(TNCO),the southwestern part of the North China Plain(NCP),the Luxi Uplift(LU)and the Sulu Orogen(SLO),ending at Qingdao City of Shandong Province,the eastern margin of China(120.12°E)along 36°N.We utilized reflectivity synthetic seismogram modeling of the active source data to develop 1-D velocity structures of the sub-blocks of the NCC.Our final model shows that the NCC crust varies remarkably among the tectonic units with different velocity structure features.Higher lower crustal velocity and Moho depth^42 km is a major feature of the crust beneath southern Ordos Blockt.The TNCO which is composed of Lyuliangshan Mountains(LM),Shanxi Graben(SXG)and Taihangshan Mountains(TM)shows dominant trans-orogenic features.The NCP shows a dominant thickening of sediments,sharp crust thinning with Moho depth^32 km and significant lower average velocity.The SLO and the LU shows a stratified crust,higher average velocity and crust thinning with Moho depth of^35 km.Our model shows the coincidence between the deep structure and the surface geology among all the tectonic sub-blocks of the NCC.展开更多
To investigate the geodynamic processes of Mesozoic large-scale mineralization in South China,we deployed a 350-km-long,wide-angle seismic reflection/refraction sounding profile between Yingshan in Hubei and Changshan...To investigate the geodynamic processes of Mesozoic large-scale mineralization in South China,we deployed a 350-km-long,wide-angle seismic reflection/refraction sounding profile between Yingshan in Hubei and Changshan in Zhejiang.This profile traverses the Cu-Au metallogenic belt in the middle and lower reaches of the Yangtze River(YMB),the Jiangnan W-polymetal metallogenic belt(JNMB),and the Qinhang Cu-polymetal metallogenic belt(QHMB).Our imaging results reveal various interesting velocity features along the profile.(1)The velocity structure is characterized by vertical layering and horizontal blocking;(2)the YMB is marked by high velocity and high V_(p)/V_(s) ratios in general with a significantly uplifted Moho interface and a thin crust of~31 km,and the lower crust contains high-velocity anomalies and has the characteristics of a crustmantle transition zone;(3)the JNMB is bounded by the Jiangnan fault and Jingdezhen-Huangshan fault and has low-velocity anomalies and low V_(p)/V_(s) ratios;and(4)the QHMB is characterized by high-velocity anomalies and high V_(p)/V_(s) ratios.The highvelocity anomalies in the YMB and QHMB represent relatively Cu-Au-rich mafic juvenile lower crust.The formation of this kind of crust is considered to be related to mantle-derived magma underplating or residues of Neoproterozoic oceanic crustal materials,and it also provided sources for large-scale Cu-Au mineralization in the Mesozoic.The JNMB has features similar to those of ancient crusts enriched in W-Sn,the partial melting of which played a leading role in the formation of the superlarge W deposits in this belt.Considering these results and other regional geological data,we propose that a large-scale oblique upwelling of the asthenosphere along the collisional belt of the Yangtze and Cathaysia blocks during the Mesozoic was the deep driving mechanism for the explosive mineralization of Cu,Au,and W in northeastern South China.The boundaries of the blocks or terrains and discontinuities of the lithosphere were the main channels for deep heat and magmas and therefore controlled the spatial distribution of the metallogenic belt.展开更多
The Emeishan large igneous province(ELIP) in SW China is interpreted to be associated with an ancient mantle plume. Most of the constraints on the role of mantle plume in the generation of the Emeishan flood basalts w...The Emeishan large igneous province(ELIP) in SW China is interpreted to be associated with an ancient mantle plume. Most of the constraints on the role of mantle plume in the generation of the Emeishan flood basalts were provided by geological and geochemical methods, but the geophysical investigation is very limited. In order to better understand the deep structure and features of ELIP, we have studied the crustal velocity structure using the data acquired from the Lijiang-Panzhihua-Qingzhen wide-angle seismic profile. This profile crosses the three sub-zones of the ELIP(the inner, intermediate, and outer zones), divided based on the differential erosion and uplift of the Maokou limestone. The results provided by the active source seismic experiment demonstrate:(1) The average depth of the crystalline basement along the profile is about 2 km.(2) The middle crust in the Inner Zone is characterized by high-velocity anomalies, with the average velocity of 6.2-6.6 km/s, which is about 0.1– 0.2 km/s higher than the normal one. The velocity of the lower crust in the inner zone is 6.9-7.2 km/s, higher than those observed in the intermediate and outer zones(6.7-7.0 km/s). Relatively low velocity anomalies appear in the upper, middle and lower crusts near the junction of the inner zone and intermediate zone, probably due to the effect of the Xiaojiang fault(XJF).(3) The average velocity of the crust is comparatively low on both sides of XJF, especially on the east side, and the average velocity of the consolidated continental crust is also low there. This may suggest that the XJF extends at least down to 40 km deep, even beyond through the crust.(4) The depth to the Moho discontinuity decrease gradually from 47-53 km in the inner zone, via 42-50 km in the intermediate zone to 38-42 km in the outer zone. In the inner zone, the Moho uplifts locally and the(consolidated) crust is characterized by high-velocity anomalies, which are likely related to intensive magma intrusion and underplating associated with melting of plume head. Overall the crustal velocity structure in the study area recorded the imprint left by the Permian Emeishan mantle plume.展开更多
We report two models of the lateral displacement of acoustic-wave scattering on a fluid-solid interface that reveal an acoustic analog of the Goos-Hainchen effect in optics. This acoustic analog is called the acoustic...We report two models of the lateral displacement of acoustic-wave scattering on a fluid-solid interface that reveal an acoustic analog of the Goos-Hainchen effect in optics. This acoustic analog is called the acoustic Goos-Hainchen effect. Using newly proposed models, we made numerical calculations for the system ofa water-Perspex interface. Specifically, in the post-critical-angle region, we observed a lateral displacement （and transition time） of the reflected P-wave with respect to the incident P-wave. The first arrival of the acoustic signal from the interface is found to be a reflected P-wave rather than the sliding-refraction P-wave usually described in traditional acoustic-logging sliding P-wave theory. For both proposed models, the effective propagation speed of the reflected P-wave along the interface depends on not only the physical properties of the interracial media but also the incident angle. These observations are intriguing and warrant further investigation.展开更多
基金Project supported by the Council of Scientific and Industrial Research (CSIR) of New Delhi(Nos. 09/105(0169)/2008-EMR-I and 09/105(0185)/2009-EMR-I)
文摘The propagation of elastic waves is studied in a porous solid saturated with two immiscible viscous fluids. The propagation of three longitudinal waves is represented through three scalar potential functions. The lone transverse wave is presented by a vector potential function. The displacements of particles in different phases of the aggregate are defined in terms of these potential functions. It is shown that there exist three longitudinal waves and one transverse wave. The phenomena of reflection and refraction due to longitudinal and transverse waves at a plane interface between an elastic solid half-space and a porous solid half-space saturated with two immiscible viscous fluids are investigated. For the presence of viscosity in pore-fluids, the waves refracted to the porous medium attenuate in the direction normal to the interface. The ratios of the amplitudes of the reflected and refracted waves to that of the incident wave are calculated as a non- singular system of linear algebraic equations. These amplitude ratios are used to further calculate the shares of different scattered waves in the energy of the incident wave. The modulus of the amplitude and the energy ratios with the angle of incidence are computed for a particular numerical model. The conservation of the energy across the interface is verified. The effects of variations in non-wet saturation of pores and frequencies on the energy partition are depicted graphically and discussed,
文摘Phenomena of reflection and refraction of plane harmonic waves at a plane interface between an elastic solid and doubleporosity dual-permeability material are investigated. The elastic solid behaves non-dissipatively, while double-porosity dual-permeability materials behave dissipatively to wave propagation due to the presence of viscosity in pore fluids. All the waves(i.e., incident and reflected) in an elastic medium are considered as homogeneous(i.e., having the same directions of propagation and attenuation), while all the refracted waves in double-porosity dual-permeability materials are inhomogeneous(i.e., having different directions of propagation and attenuation). The coefficients of reflection and refraction for a given incident wave are obtained as a non-singular system of linear equations. The energy shares of reflected and refracted waves are obtained in the form of an energy matrix. A numerical example is considered to calculate the partition of incident energy among various reflected and refracted waves. The effect of incident direction on the partition of the incident energy is analyzed with a change in wave frequency, wave-induced fluid-flow, pore-fluid viscosity and double-porosity structure.It has been confirmed from numerical interpretation that during the reflection/refraction process, conservation of incident energy is obtained at each angle of incidence.
基金This work was supported by the Chinese Academy of Sciences Strategic Pioneering Science and Technology Special Project(XDA28050200)the Jilin Province Science and Technology Development Program in China(20200403062SF,20200401141GX,20210201023GX,20210201140GX,and 20210203059SF)+1 种基金the Chinese Academy of Sciences Research Instrumentation Development Project(YJKYYQ20200048)the Science and Technology Innovation Platform of Jilin Province(20210502016ZP).
文摘Abnormal refraction and reflection refers to the phenomenon in which light does not follow its traditional laws of propagation and instead is subject to refraction and reflection at abnormal angles that satisfy a generalization of Snell’s law.Metasurfaces can realize this phenomenon through appropriate selection of materials and structural design,and they have a wide range of potential applications in the military,communications,scientific,and biomedical fields.This paper summarizes the current state of research on abnormal refractive and reflective metasurfaces and their application scenarios.It discusses types of abnormal refractive and reflective metasurfaces based on their tuning modes(active and passive),their applications in different wavelength bands,and their future development.The technical obstacles that arise with existing metasurface technology are summarized,and prospects for future development and applications of abnormal refractive and reflective metasurfaces are discussed.
文摘In order to investigate the interrelations of crust and upper mantle tectonics and its velocity distribution as well as seismicity in the Yanhuai basin and its surrounding area, a nearly EW trending Beijing Huailai Fengzhen wide angle reflection/refraction profile, which obliquely passes through seismic zone of Zhangjiakou Bohai Sea and coincides with a deep reflection profile in the Yanhuai basin, was completed recently. The results show: The crust presents layered structures and its thickness gradually increases from 35.0 km in Shunyi to 42.0 km in the west end of the profile; the interior crustal interfaces appear approximately horizontal or slowly sloping down from east to west; In the Yanhuai basin, the crust presents the characteristics of higher velocities alternating with the lower ones and the low velocity bodies obviously exist in the lower part of upper crust. Moreover, there are two deep crustal fault zones which stretch to the Moho discontinuity, are closely related with the seismicity in the Yanhuai area.
基金supported by the DREAM project of the National Key R&D Program of China(No.2016YFC0600402)the National Natural Science Foundation of China(No.41774071)the US Gelogical Survey Earthquake Hazards Program。
文摘We present crustal models for seismic P-waves(Vp),S-waves(Vs)and the Vp/Vs ratio across the southern North China Craton along latitude 36°N.Our results are based on inverse and forward modeling of long-range wide-angle reflection/refraction data.The crust of the southern Ordos Block has high lower crustal velocity(7.0 km/s)and a Moho depth of~42 km.In contrast,thick sediments and a lower average velocity(compared with the Ordos block)found underneath the Shanxi Graben are likely to be the products of rifting that has occurred since the Cenozoic.Steep Moho dips,exposed basement rock and higher average crustal velocity beneath the Lüliang Mountain and the Taihang Mountain are characteristic of an orogenic belt.The Tanlu fault and the Liaocheng-Lankao fault show sharp crustal velocity variations and a Moho offset.This seismic profile sampled the entire region of the Eastern North China Craton where the cratonic root has been destroyed and the unique crustal structure is correlated with the substantially modified lithosphere.Our crustal seismic velocity model shows a strong correspondence between surface geology,local tectonics and the deep crustal structure.
基金supported by the National Key Basic Research Program of China(Grant No.2013CB429701)the National Natural Science Foundation of China(Grant Nos.41606083,91958210,41606050 and 41210005)+1 种基金AoShan Technological Innovation Projects of National Laboratory for Marine Science and Technology(Qingdao)(2015ASKJ03)National Marine Geological Special Project(DD20190236,DD20190365,DD20190377)。
文摘The marginal sea and back-arc basins in the Western Pacific Ocean have become the focus of tectonics due to their unique tectonic location.To understand the deep crustal structure in the back-arc region,we present a 545-kmlong active-source ocean bottom seismometer(OBS)wide-angle reflection/refraction profile in the East China Sea.The P wave velocity model shows that the Moho depth rises significantly,from approximately 30 km in the East China Sea shelf to approximately 16 km in the axis of the Okinawa Trough.The lower crustal high-velocity zone(HVZ)in the southern Okinawa Trough,with V_(p) of 6.8-7.3 km/s,is a remarkable manifestation of the mantle material upwelling and accretion to the lower crust.This confirms that the lower crustal high-velocity mantle accretion is developed in the southern Okinawa Trough.During the process of back-arc extension,the crustal structure of the southern Okinawa Trough is completely invaded and penetrated by the upper mantle material in the axis region.In some areas of the southern central graben,the crust may has broken up and entered the initial stage of seafloor spreading.The discontinuous HVZs in the lower crust in the back-arc region also indicate the migration of spreading centers in the back-arc region since the Cenozoic.The asthenosphere material upwelling in the continent-ocean transition zone is constantly driving the lithosphere eastward for episodic extension,and is causing evident tectonic migration in the Western Pacific back-arc region.
基金supported by the National Key R&D Program of China(Grant No.2016YFC0600301)the National Natural Science Foundation of China(Grant 42030308,41974053,and 41888101)
文摘The relationship of the crustal contact between the Indian and Eurasian plates is a key issue in understanding crustal thickening and the subduction of the Indian lithosphere beneath the Qinghai-Tibetan Plateau.Across the middle of the Yarlung-Zangbo Suture(YZS),we deployed an~450-km-long SN-trending wide-angle reflection/refraction profile to observe the P-wave velocity(vP)structure beneath the northern Himalaya and the southern plateau.Our results show that,1.the high vP(~7.1 km/s)indicates that the Indian lower crust extends no more than 50 km north of the YZS.2.The lower crust beneath the southern part of the plateau features an extremely low vP(<6.7±0.2 km/s).3.Compared with the velocities of several typical crustal lithologies in different temperature regimes,the low vPin the lower crust can be explained by felsic-intermediate granulite,which has prevented the lower crust from further eclogitization.We propose that the dip angle of the Indian lithospheric slab beneath the YZS is partly controlled by the composition of the lower crust of the plateau.In the northern middle YZS,the crust of the southern plateau is too thick and blocks the northward advancement of the Indian lower crust,resulting in the subduction of the Indian lithospheric slab into the upper mantle.The lower crust in western and eastern Lhasa is dominated by a mafic composition,and it was delaminated after eclogitization before the Miocene.The void zone generated by delamination favors the flattening and underthrusting of the Indian lower crust.
基金This research was funded by the 10th Five-Year KeyProject of Fujian Province ,entitled"Exploration of active fault and seismic risk evaluationin cities in Fujian province"
文摘The Zhangzhou basin is located at the middle section of the southeast coast seismic zone of the mainland of China. Using high-resolution refraction and wide-angle reflection/refraction seismic profiling of Zhangzhou basin and its vicinity, we have obtained the crustal geometric structure and velocity structure as well as the geometric configuration and structural relationship between the deep and shallow fractures. The results show that the crust in the region is divided into the upper crust and lower crust. The thickness of the upper crust is 16.5km- 18.8km, and that of the lower crust is 12.0km- 13.0km. The upper crust is further divided into an upper and lower section. In the lower section of the upper crust, there is a low-velocity layer with a velocity of about 6.00km/s; the depth of the top surface of the low-velocity layer is about 12.0km, and the thickness is about 5.0km. The lower crust is also divided into an upper and lower section. The depth of Moho is 29.0km- 31 .8km There are 6 normal faults in the shallow crust in this region, and most of them extend downwards to a depth of less than 4kin, the maximum depth is about 5km. Below the shallow normal faults, there is a conjectural high-dip angle deep fault zone. The fault zone extends downwards till the Moho and upwards into the low-velocity layer in lower section of the upper crust. The deep and shallow faults are not tectonically connected. The combination character of deep and shallow structures in the Zhangzhou basin indicates that the Jiulongjiang fault zone is a deep fault zone with distinct characteristics and a complex deep and shallow structure background. The acquisition of deep seismic exploration results obviously enhanced the reliability of explanation of deep-structural data and the exploration precision of the region. The combination of deep and shallow structures resulted in uniform explanation results. The delamination of the crust and the characteristic of the structures are more precise and explicit. We discovered for the first time the combination characteristics of extensional structures and listric faults in the upper crust. This is not only helpful to the integrative judgment of earthquake risk in Zhangzhou and its vicinity, but also of importance for deepening the knowledge of deep dynamic processes in the southeast coast seismic zone.
文摘The crustal basement of Northwest Germany can be interpreted as an “Avalonian Terrane Assemblage” subdivided by a roughly NW-SE (Hercynian) and SW-NE (Rhenish) running horst and graben system. In Late Devonian and Early Carboniferous times, this assemblage was flooded by the sea and mainly marine carbonates were deposited on the horsts and Stillwater shales in the grabens, as interpretable through magnetotelluric measurements. Dur</span><span style="font-family:Verdana;">ing the Late Carboniferous Variscan Orogeny, this terrain became the </span><span style="font-family:Verdana;">coal-rich </span><span style="font-family:Verdana;">foreland of the colliding Rhenohercynian belt. The shale-filled grabens </span><span style="font-family:Verdana;">reacted </span><span style="font-family:Verdana;">through folding and thrusting with different anticlinal patterns, the main</span><span style="font-family:Verdana;"> carbonate covered horst in a still unknown way. This horst was the location of the Late Carboniferous basin center and of the inverted oil-rich Mesozoic Lower Saxony Basin (southwestern sector), respectively, with the so-called Bramsche Massif therein. It probably acted as an indenter for the evolution of the Variscan ore-rich Harz Mountains and forced the approaching Rhenohercynian orogen to stack the appropriate tectonic nappes by horizontal shortening to very high altitudes and the root into large depths. Based on seismic evidence this root is still an uncompleted crust/mantle transition zone with a deep reflection seismic and petrological Moho and a shallower hardly reflecting refraction seismic velocity Moho. The alternative, partly unsolved location of the Variscan Deformation Front in Northwest Germany may represent the new findings. The results may be supported by a comparison with features of the northern Alpine deformation belt.
文摘The propagation characteristics of impact waves across a planar interface between a ceramic layer and a ceramic/metal(C/M) composite layer were investigated. Two interfacial boundary conditions were considered: one was a shear coupling boundary condition that simulated a perfectly bonded interface between the ceramic and composite, and the other was a slip boundary condition that only allowed a transmission of the transverse motion and normal stress at the interface. The ceramic was subjected to an incident impact wave. The ceramic and composite was assumed to be elastic during impact. The study was based on a basic method provided by Furlong, Westburg and Phillips for predicting the reflection and refraction of spherical waves across a planar interface separating two elastic solids. Emphasis was put on the effect of the metal volume fraction in the composite, ceramic thickness and interfacial boundary condition on the reflected waves. New and interesting results are obtained that provide a very useful guidance for design of a ceramic/composite armor and of a C/M functionally graded appliqué.
文摘The fine structure of crust mantle transition zone in Yanqing Hailai(Yan Huai basin) basin has been analyzed and discussed by using the data of Yanqing Hailai deep seismic reflection profile and Beijing Huailai Fengzhen deep seismic sounding profile obtained respectively in 1992 and in 1993. The primary model is established based on CDP stacking profile. The phases of seismic refraction waves and wide angle reflection waves are analyzed, travel time inversion is carried out and 2 D ray tracing is computed. Synthetic seismograms are completed by using re flectivity method for waveform fitting of phases P M and P M′, they are reflection waves from both the upper and the lower boundaries of the crust mantle transition zone in this basin. The results show that the P M′ reflection waves are stronger at some points and come from the lower boundary of Moho discontinuity. It is confirmed and inter preted that the Moho discontinuity in Yanqing Hailai basin consists of a group of thin layers with alternatively higher and lower velocities.
文摘In this paper, the typical velocity structures and average velocities of the crust in six different active tectonic block regions are presented on the basis of previous studies and their tectonic implications are discussed. The results show that different tectonic units have different features of crustal velocity structures. In general, there are low velocity distributions in the crust in regions with strong tectonic activities, and the scales of low velocity distributions are related to the tectonic activities. The average velocities are relatively low in such regions. This reflects strong crustal deformation and the variations of states of matter in the crust resulting from strong tectonic movements. These regions are also seismically active zones frequented by strong earthquakes. Therefore, studying crustal velocity structures of these regions is of great importance to understanding crustal geodynamic process and seismogenic tectonic background.
基金Project supported by the National Natural Science Foundation of China(Grant No.61771385)the Science Foundation for Distinguished Young Scholars of Shaanxi Province,China(Grant No.2020JC-42)+1 种基金the Fund from the Science and Technology on Solid-State Laser Laboratory,China(Grant No.6142404180301)the Science and Technology Research Plan of Xi’an City,China(Grant No.GXYD14.26).
文摘A general solution is obtained to a canonical problem of the reflection and refraction of an arbitrary shaped beam by using a uniaxially anisotropic chiral slab.The reflected,internal as well as refracted shaped beams are expanded in terms of cylindrical vector wave functions,and the expansion coefficients are determined by using the boundary conditions and method of moments procedure.As two typical examples,the normalized field intensity distributions are evaluated for a fundamental Gaussian beam and Hermite-Gaussian beam,and some propagation properties,especially the negative refraction phenomenon,are discussed briefly.
基金This project sponsored by the National Natural Science Foudation of China(NSFC)(41574084 and 41774071)
文摘We present the 1-D crustal velocity structure of the major tectonic blocks of the North China Craton(NCC)along 36°N based on synthetic seismogram modeling of long-range wide-angle reflection/refraction data.This profile extends from southwest Yan’an of central Shaanxi Province of China(109.47°E),across the southern Trans-North China Orogen(TNCO),the southwestern part of the North China Plain(NCP),the Luxi Uplift(LU)and the Sulu Orogen(SLO),ending at Qingdao City of Shandong Province,the eastern margin of China(120.12°E)along 36°N.We utilized reflectivity synthetic seismogram modeling of the active source data to develop 1-D velocity structures of the sub-blocks of the NCC.Our final model shows that the NCC crust varies remarkably among the tectonic units with different velocity structure features.Higher lower crustal velocity and Moho depth^42 km is a major feature of the crust beneath southern Ordos Blockt.The TNCO which is composed of Lyuliangshan Mountains(LM),Shanxi Graben(SXG)and Taihangshan Mountains(TM)shows dominant trans-orogenic features.The NCP shows a dominant thickening of sediments,sharp crust thinning with Moho depth^32 km and significant lower average velocity.The SLO and the LU shows a stratified crust,higher average velocity and crust thinning with Moho depth of^35 km.Our model shows the coincidence between the deep structure and the surface geology among all the tectonic sub-blocks of the NCC.
基金supported by the National Key R&D Program of China(Grant Nos.2019YFA0708602,2019YFA0708603,and 2016YFC0600201)the National Natural Science Foundation of China(Grant Nos.42130807,42074099)the China Geological Survey(Grant No.1212011220243)。
文摘To investigate the geodynamic processes of Mesozoic large-scale mineralization in South China,we deployed a 350-km-long,wide-angle seismic reflection/refraction sounding profile between Yingshan in Hubei and Changshan in Zhejiang.This profile traverses the Cu-Au metallogenic belt in the middle and lower reaches of the Yangtze River(YMB),the Jiangnan W-polymetal metallogenic belt(JNMB),and the Qinhang Cu-polymetal metallogenic belt(QHMB).Our imaging results reveal various interesting velocity features along the profile.(1)The velocity structure is characterized by vertical layering and horizontal blocking;(2)the YMB is marked by high velocity and high V_(p)/V_(s) ratios in general with a significantly uplifted Moho interface and a thin crust of~31 km,and the lower crust contains high-velocity anomalies and has the characteristics of a crustmantle transition zone;(3)the JNMB is bounded by the Jiangnan fault and Jingdezhen-Huangshan fault and has low-velocity anomalies and low V_(p)/V_(s) ratios;and(4)the QHMB is characterized by high-velocity anomalies and high V_(p)/V_(s) ratios.The highvelocity anomalies in the YMB and QHMB represent relatively Cu-Au-rich mafic juvenile lower crust.The formation of this kind of crust is considered to be related to mantle-derived magma underplating or residues of Neoproterozoic oceanic crustal materials,and it also provided sources for large-scale Cu-Au mineralization in the Mesozoic.The JNMB has features similar to those of ancient crusts enriched in W-Sn,the partial melting of which played a leading role in the formation of the superlarge W deposits in this belt.Considering these results and other regional geological data,we propose that a large-scale oblique upwelling of the asthenosphere along the collisional belt of the Yangtze and Cathaysia blocks during the Mesozoic was the deep driving mechanism for the explosive mineralization of Cu,Au,and W in northeastern South China.The boundaries of the blocks or terrains and discontinuities of the lithosphere were the main channels for deep heat and magmas and therefore controlled the spatial distribution of the metallogenic belt.
基金supported by the National Basic Research Program of China(Grant No.2011CB808904)the National Natural Science Foundation of China(Grants Nos.41274070,41474068)
文摘The Emeishan large igneous province(ELIP) in SW China is interpreted to be associated with an ancient mantle plume. Most of the constraints on the role of mantle plume in the generation of the Emeishan flood basalts were provided by geological and geochemical methods, but the geophysical investigation is very limited. In order to better understand the deep structure and features of ELIP, we have studied the crustal velocity structure using the data acquired from the Lijiang-Panzhihua-Qingzhen wide-angle seismic profile. This profile crosses the three sub-zones of the ELIP(the inner, intermediate, and outer zones), divided based on the differential erosion and uplift of the Maokou limestone. The results provided by the active source seismic experiment demonstrate:(1) The average depth of the crystalline basement along the profile is about 2 km.(2) The middle crust in the Inner Zone is characterized by high-velocity anomalies, with the average velocity of 6.2-6.6 km/s, which is about 0.1– 0.2 km/s higher than the normal one. The velocity of the lower crust in the inner zone is 6.9-7.2 km/s, higher than those observed in the intermediate and outer zones(6.7-7.0 km/s). Relatively low velocity anomalies appear in the upper, middle and lower crusts near the junction of the inner zone and intermediate zone, probably due to the effect of the Xiaojiang fault(XJF).(3) The average velocity of the crust is comparatively low on both sides of XJF, especially on the east side, and the average velocity of the consolidated continental crust is also low there. This may suggest that the XJF extends at least down to 40 km deep, even beyond through the crust.(4) The depth to the Moho discontinuity decrease gradually from 47-53 km in the inner zone, via 42-50 km in the intermediate zone to 38-42 km in the outer zone. In the inner zone, the Moho uplifts locally and the(consolidated) crust is characterized by high-velocity anomalies, which are likely related to intensive magma intrusion and underplating associated with melting of plume head. Overall the crustal velocity structure in the study area recorded the imprint left by the Permian Emeishan mantle plume.
基金the Xi’an University of Posts and Telecommunicationsthe Physical Sciences Division at the University of Chicagothe Scientific Research Program(Grant No.15JK1685)of the Shaanxi Provincial Education Department
文摘We report two models of the lateral displacement of acoustic-wave scattering on a fluid-solid interface that reveal an acoustic analog of the Goos-Hainchen effect in optics. This acoustic analog is called the acoustic Goos-Hainchen effect. Using newly proposed models, we made numerical calculations for the system ofa water-Perspex interface. Specifically, in the post-critical-angle region, we observed a lateral displacement （and transition time） of the reflected P-wave with respect to the incident P-wave. The first arrival of the acoustic signal from the interface is found to be a reflected P-wave rather than the sliding-refraction P-wave usually described in traditional acoustic-logging sliding P-wave theory. For both proposed models, the effective propagation speed of the reflected P-wave along the interface depends on not only the physical properties of the interracial media but also the incident angle. These observations are intriguing and warrant further investigation.
