This research presents a compact,high-gain millimeter-wave antenna tailored for reliable 5 G communication in high-speed railway environments.The proposed antenna supports dual-band operation at 28 GHz(n257/n258)and 3...This research presents a compact,high-gain millimeter-wave antenna tailored for reliable 5 G communication in high-speed railway environments.The proposed antenna supports dual-band operation at 28 GHz(n257/n258)and 38 GHz(n260),enabling robust Vehicle-to-Infrastructure(V2I)links required for next-generation railway systems.The radiator occupies only 12 mm×8mm on a Rogers 6010LM substrate(ε_(r)=10.2,h=0.64 mm).A Metallic Ground-Backing(MGB)reflector,positioned 9mm behind the patch—λ/4 at 28 GHz—enhances forward radiation,suppresses back-lobes,and ensures highly directional coverage along railway tracks.The antenna achieves measured peak gains of 7.96 dBi at 28 GHz and 8.20 dBi at 38 GHz,with excellent impedance matching and stable radiation patterns under mobility scenarios.Its unique combination of compact footprint,reflectoraided gain enhancement,and stable dual-band performance under dynamic conditions distinguishes it from conventional millimeter-wave solutions,making it a strong candidate for 5G-based high-speed railway communication modules and arrays.展开更多
Progressing beyond the stowage and deployment of reflectors and designing for multiple deployed states result in reflector shape reconfiguration,thus allowing for new functions including radiation pattern reconfigurat...Progressing beyond the stowage and deployment of reflectors and designing for multiple deployed states result in reflector shape reconfiguration,thus allowing for new functions including radiation pattern reconfiguration,and is valuable for space applications such as satellite-based radar and communications.This paper introduces a concept for achieving the deployment and shape reconfiguration of a paraboloid reflector using a 7R-8R(revolute joint)truss network.By realizing reconfigurability mechanically,complex electronic systems such as phased arrays can be avoided,and adopting a single-degree-of-freedom(DOF)design further reduces the number of required actuators.The proposed reflector is axisymmetric and can be doubly curved.It comprises a flexible mesh surface supported by a rigid truss network constructed from 7R and 8R linkages.Approximation of multiple target surfaces is achieved by synthesizing the truss network dimensions using a multiobjective optimization approach.The non-dominated sorting genetic algorithm is used in conjunction with analytical dimension parameterization and forward kinematics computation to determine the optimal dimensions for the truss network.In the resulting designs,the reflector follows a single-DOF trajectory,on which it unfolds from a compact stowed bundle toward a deployed state approximating a doubly curved target surface,then onwards to additional deployed states approximating different target surfaces.Design studies are conducted to demonstrate the reflector’s ability to approximate different target surfaces and continuously transform between such surfaces.This study proposes a new method for reconfiguring reflector shape mechanically,thus uniquely reconfiguring the shape of a doubly curved surface and achieving both deployment and shape reconfiguration under a unified single-DOF motion.展开更多
Flexible top-emission organic light-emitting diodes(f-TEOLEDs)with a high aperture ratio can be used in next-generation wearable electronic applications.However,the advancement of f-TEOLEDs is being hindered by their ...Flexible top-emission organic light-emitting diodes(f-TEOLEDs)with a high aperture ratio can be used in next-generation wearable electronic applications.However,the advancement of f-TEOLEDs is being hindered by their low light extraction and poor mechanical stability.In this study,we introduce an omnidirectional reflector(ODR)consisting of an Ag/SiO_(2)/Ta_(2)O_(5)cylinder-embedded indium zinc oxide(IZO)mesh(c-mesh)structure that improves both the light extraction and mechanical flexibility of TEOLEDs using blue thermally activated delayed fluorescence emitters.The proposed ODR achieved a remarkable reflectance of over 96%,particularly in the transverse-electric mode.Furthermore,the Ta_(2)O_(5)cylinders effectively compensated for the diverse void-induced depths in the IZO mesh,significantly reducing the leakage current between the electrode and the organic layers.In addition,the ODR electrodes exhibited outstanding mechanical stability.Moreover,even after being subjected to 2000 bending cycles over a 5 mm radius,the device luminance changed by less than 20%.Notably,the proposed f-TEOLEDs with Ag/SiO_(2)/c-mesh electrodes demonstrated superior performance,achieving a low turn-on voltage(2.6 V),high current efficiency(33 cd·A^(-1)),and power efficiency of 29.6 lm·W^(-1).Finally,the devices featured a narrow full width at half maximum of27 nm under first-order microcavity effects.展开更多
We propose a method for mOdeling azimuthal AVO responses from a fractured i reflector. The method calculates the integrated reflected wavetrains, and the wavetrains contain elastodynamic information including the con...We propose a method for mOdeling azimuthal AVO responses from a fractured i reflector. The method calculates the integrated reflected wavetrains, and the wavetrains contain elastodynamic information including the contrast in impedance and anelasticity i across interfaces, the intemal anisotropic propagation, the dispersion and attenuation along i the wave path, and tuning and interference. The results suggest that for large angles of incidence, the velocity dispersion and attenuation increase the amplitudes of PP waves from the top and decrease those from the bottom. For azimuthal responses at specific angles of incidence, the reflected wavetrains of PP waves tend to have longer duration with increasing azimuth. In contrast, model-converted PSV and PSH reflections show stable azimuthal features and are less affected by the reflector thickness. The amplitudes of PSV reflections increase with increasing azimuth; moreover, the waves have no reflection energy at 0° and 90° azimuth and maximum amplitude at 45° azimuth.展开更多
Seismic studies of the crustal structure beneath the Three Gorges Reservoir（TGR） region in Central China have been limited by the sparse and uneven distribution of seismic stations.To in-crease the station coverage,...Seismic studies of the crustal structure beneath the Three Gorges Reservoir（TGR） region in Central China have been limited by the sparse and uneven distribution of seismic stations.To in-crease the station coverage,we made three deployments of a mobile seismologic array in the TGR re-gion during the three summers from 2008 to 2010.Here we present interpretations along a west-east profile through the central TGR region based on new seismic waveform data and a velocity model con-strained by regional earthquake data.Two strong mid-crustal reflection interfaces at depths around 10 and 20 km are seen under the TGR.The shallow reflector defines the bottom of the Zigui（秭归） basin.The new waveform data show that the amplitude of the Moho reflection is quite weak,and beneath the Moho,there is a strong reflector around 54-km depth.It is likely that in the TGR region,the Moho is a gradient rather than a sharp boundary.We speculate that the gradient Moho and the 54-km-deep re-flector in the upper mantle in the TGR region may be by-products of the Qinling（秦岭）-Dabie（大别） orogen.展开更多
A silicon on reflector (SOR) substrate containing a thin crystal silicon layer and a buried Si/SiO 2 Bragg reflector is reported. The substrate, which is applied to optoelectronic devices, is fabricated by using Si...A silicon on reflector (SOR) substrate containing a thin crystal silicon layer and a buried Si/SiO 2 Bragg reflector is reported. The substrate, which is applied to optoelectronic devices, is fabricated by using Si based sol gel sticking and smart cut techniques. The reflectivity of the SOR substrate is close to unity at 1 3μm's wavelength under the normal incidence.展开更多
An integratable distributed Bragg reflector laser is fabricated by low energy ion implantation induced quantum well intermixing.A 4 6nm quasi continuous wavelength tuning range is achieved by controlling phase curr...An integratable distributed Bragg reflector laser is fabricated by low energy ion implantation induced quantum well intermixing.A 4 6nm quasi continuous wavelength tuning range is achieved by controlling phase current and grating current simultaneously,and side mode suppression ratio maintains over 30dB throughout the tuning range except a few mode jump points.展开更多
An offset elliptical reflector antenna suitable for satellite application was designed and investigated when it was fed by a rectangular horn partially filled.with a dielectric..The.reflector antenna exhibits high gai...An offset elliptical reflector antenna suitable for satellite application was designed and investigated when it was fed by a rectangular horn partially filled.with a dielectric..The.reflector antenna exhibits high gain, low cross polarization. low sidelines and an elliptical beam. Al- though this study has been carried out in view of possible satellite applications, it is clear that this. antenna. is also suitable for use in radar antennas.展开更多
Deployable high-frequency mesh reflector antennas for future communications and obser- vations are required to obtain high gain and high directivity. In order to support these new missions, reflectors with high surfac...Deployable high-frequency mesh reflector antennas for future communications and obser- vations are required to obtain high gain and high directivity. In order to support these new missions, reflectors with high surface accuracy are widely required. The form-finding analysis of deployable mesh reflector antennas becomes more vital which aims to determine the initial surface profile formed by the equilibrium prestress distribution in cables to satisfy the surface accuracy requirement. In this paper, two form-finding methods for mesh reflector antennas, both of which include two steps, are pro- posed. The first step is to investigate the prestress design only for the cable net structure as the circum- ferential nodes connected to the supporting truss are assumed fixed. The second step is to optimize the prestress distribution of the boundary cables connected directly to the supporting truss considering the elastic deformation of the antenna structure. Some numerical examples are carried out and the simulation results demonstrate the proposed form-finding methods can warrant the deformed antenna reflector surface matches the one by design and the cable tension forces fall in a specified range.展开更多
The wet oxidation of AlGaAs with high Al content in a distributed Bragg reflectors （DBR） is studied by scanning electron microscopy （SEM） and transmission electron microscopy （TEM）. Some voids distribute along t...The wet oxidation of AlGaAs with high Al content in a distributed Bragg reflectors （DBR） is studied by scanning electron microscopy （SEM） and transmission electron microscopy （TEM）. Some voids distribute along the oxide/GaAs interfaces due to the stress induced by the wet oxidation of the AlGaAs layers. These voids decrease the shrinkage of the Al2O3 layers to 8% instead of the theoretical 20% when compared to the unoxidized AlGaAs layers. With the extension of oxidation time, the reactants are more completely transported to the front interface and the products are more completely transported out along the porous interfaces. As a result,the oxide quality is better.展开更多
文摘This research presents a compact,high-gain millimeter-wave antenna tailored for reliable 5 G communication in high-speed railway environments.The proposed antenna supports dual-band operation at 28 GHz(n257/n258)and 38 GHz(n260),enabling robust Vehicle-to-Infrastructure(V2I)links required for next-generation railway systems.The radiator occupies only 12 mm×8mm on a Rogers 6010LM substrate(ε_(r)=10.2,h=0.64 mm).A Metallic Ground-Backing(MGB)reflector,positioned 9mm behind the patch—λ/4 at 28 GHz—enhances forward radiation,suppresses back-lobes,and ensures highly directional coverage along railway tracks.The antenna achieves measured peak gains of 7.96 dBi at 28 GHz and 8.20 dBi at 38 GHz,with excellent impedance matching and stable radiation patterns under mobility scenarios.Its unique combination of compact footprint,reflectoraided gain enhancement,and stable dual-band performance under dynamic conditions distinguishes it from conventional millimeter-wave solutions,making it a strong candidate for 5G-based high-speed railway communication modules and arrays.
基金Supported by National Natural Science Foundation of China(Grant Nos.52320105005,52035008)the New Cornerstone Science Foundation through the Xplorer Prize(Grant No.XPLORER-2020-1035).
文摘Progressing beyond the stowage and deployment of reflectors and designing for multiple deployed states result in reflector shape reconfiguration,thus allowing for new functions including radiation pattern reconfiguration,and is valuable for space applications such as satellite-based radar and communications.This paper introduces a concept for achieving the deployment and shape reconfiguration of a paraboloid reflector using a 7R-8R(revolute joint)truss network.By realizing reconfigurability mechanically,complex electronic systems such as phased arrays can be avoided,and adopting a single-degree-of-freedom(DOF)design further reduces the number of required actuators.The proposed reflector is axisymmetric and can be doubly curved.It comprises a flexible mesh surface supported by a rigid truss network constructed from 7R and 8R linkages.Approximation of multiple target surfaces is achieved by synthesizing the truss network dimensions using a multiobjective optimization approach.The non-dominated sorting genetic algorithm is used in conjunction with analytical dimension parameterization and forward kinematics computation to determine the optimal dimensions for the truss network.In the resulting designs,the reflector follows a single-DOF trajectory,on which it unfolds from a compact stowed bundle toward a deployed state approximating a doubly curved target surface,then onwards to additional deployed states approximating different target surfaces.Design studies are conducted to demonstrate the reflector’s ability to approximate different target surfaces and continuously transform between such surfaces.This study proposes a new method for reconfiguring reflector shape mechanically,thus uniquely reconfiguring the shape of a doubly curved surface and achieving both deployment and shape reconfiguration under a unified single-DOF motion.
基金supported by the National Research Foundation of Korea,which was funded by the Korean Government(No.2016R1A3B1908249)。
文摘Flexible top-emission organic light-emitting diodes(f-TEOLEDs)with a high aperture ratio can be used in next-generation wearable electronic applications.However,the advancement of f-TEOLEDs is being hindered by their low light extraction and poor mechanical stability.In this study,we introduce an omnidirectional reflector(ODR)consisting of an Ag/SiO_(2)/Ta_(2)O_(5)cylinder-embedded indium zinc oxide(IZO)mesh(c-mesh)structure that improves both the light extraction and mechanical flexibility of TEOLEDs using blue thermally activated delayed fluorescence emitters.The proposed ODR achieved a remarkable reflectance of over 96%,particularly in the transverse-electric mode.Furthermore,the Ta_(2)O_(5)cylinders effectively compensated for the diverse void-induced depths in the IZO mesh,significantly reducing the leakage current between the electrode and the organic layers.In addition,the ODR electrodes exhibited outstanding mechanical stability.Moreover,even after being subjected to 2000 bending cycles over a 5 mm radius,the device luminance changed by less than 20%.Notably,the proposed f-TEOLEDs with Ag/SiO_(2)/c-mesh electrodes demonstrated superior performance,achieving a low turn-on voltage(2.6 V),high current efficiency(33 cd·A^(-1)),and power efficiency of 29.6 lm·W^(-1).Finally,the devices featured a narrow full width at half maximum of27 nm under first-order microcavity effects.
基金sponsored by the National Natural Science Foundation of China(under Grant Nos.41404090 and U1262208
文摘We propose a method for mOdeling azimuthal AVO responses from a fractured i reflector. The method calculates the integrated reflected wavetrains, and the wavetrains contain elastodynamic information including the contrast in impedance and anelasticity i across interfaces, the intemal anisotropic propagation, the dispersion and attenuation along i the wave path, and tuning and interference. The results suggest that for large angles of incidence, the velocity dispersion and attenuation increase the amplitudes of PP waves from the top and decrease those from the bottom. For azimuthal responses at specific angles of incidence, the reflected wavetrains of PP waves tend to have longer duration with increasing azimuth. In contrast, model-converted PSV and PSH reflections show stable azimuthal features and are less affected by the reflector thickness. The amplitudes of PSV reflections increase with increasing azimuth; moreover, the waves have no reflection energy at 0° and 90° azimuth and maximum amplitude at 45° azimuth.
基金supported by the National Natural Science Foundation of China (No. 40730317), and China Scholarship Council
文摘Seismic studies of the crustal structure beneath the Three Gorges Reservoir（TGR） region in Central China have been limited by the sparse and uneven distribution of seismic stations.To in-crease the station coverage,we made three deployments of a mobile seismologic array in the TGR re-gion during the three summers from 2008 to 2010.Here we present interpretations along a west-east profile through the central TGR region based on new seismic waveform data and a velocity model con-strained by regional earthquake data.Two strong mid-crustal reflection interfaces at depths around 10 and 20 km are seen under the TGR.The shallow reflector defines the bottom of the Zigui（秭归） basin.The new waveform data show that the amplitude of the Moho reflection is quite weak,and beneath the Moho,there is a strong reflector around 54-km depth.It is likely that in the TGR region,the Moho is a gradient rather than a sharp boundary.We speculate that the gradient Moho and the 54-km-deep re-flector in the upper mantle in the TGR region may be by-products of the Qinling（秦岭）-Dabie（大别） orogen.
文摘A silicon on reflector (SOR) substrate containing a thin crystal silicon layer and a buried Si/SiO 2 Bragg reflector is reported. The substrate, which is applied to optoelectronic devices, is fabricated by using Si based sol gel sticking and smart cut techniques. The reflectivity of the SOR substrate is close to unity at 1 3μm's wavelength under the normal incidence.
文摘An integratable distributed Bragg reflector laser is fabricated by low energy ion implantation induced quantum well intermixing.A 4 6nm quasi continuous wavelength tuning range is achieved by controlling phase current and grating current simultaneously,and side mode suppression ratio maintains over 30dB throughout the tuning range except a few mode jump points.
文摘An offset elliptical reflector antenna suitable for satellite application was designed and investigated when it was fed by a rectangular horn partially filled.with a dielectric..The.reflector antenna exhibits high gain, low cross polarization. low sidelines and an elliptical beam. Al- though this study has been carried out in view of possible satellite applications, it is clear that this. antenna. is also suitable for use in radar antennas.
基金supported by National Natural Science Foundation of China (Grant No.51375360)
文摘Deployable high-frequency mesh reflector antennas for future communications and obser- vations are required to obtain high gain and high directivity. In order to support these new missions, reflectors with high surface accuracy are widely required. The form-finding analysis of deployable mesh reflector antennas becomes more vital which aims to determine the initial surface profile formed by the equilibrium prestress distribution in cables to satisfy the surface accuracy requirement. In this paper, two form-finding methods for mesh reflector antennas, both of which include two steps, are pro- posed. The first step is to investigate the prestress design only for the cable net structure as the circum- ferential nodes connected to the supporting truss are assumed fixed. The second step is to optimize the prestress distribution of the boundary cables connected directly to the supporting truss considering the elastic deformation of the antenna structure. Some numerical examples are carried out and the simulation results demonstrate the proposed form-finding methods can warrant the deformed antenna reflector surface matches the one by design and the cable tension forces fall in a specified range.
文摘The wet oxidation of AlGaAs with high Al content in a distributed Bragg reflectors （DBR） is studied by scanning electron microscopy （SEM） and transmission electron microscopy （TEM）. Some voids distribute along the oxide/GaAs interfaces due to the stress induced by the wet oxidation of the AlGaAs layers. These voids decrease the shrinkage of the Al2O3 layers to 8% instead of the theoretical 20% when compared to the unoxidized AlGaAs layers. With the extension of oxidation time, the reactants are more completely transported to the front interface and the products are more completely transported out along the porous interfaces. As a result,the oxide quality is better.
