Taiyuan formation is the main exploration strata in Ordos Basin, and coals are widely developed. Due to the interference of strong reflection of coals, we cannot completely identify the effective reservoir information...Taiyuan formation is the main exploration strata in Ordos Basin, and coals are widely developed. Due to the interference of strong reflection of coals, we cannot completely identify the effective reservoir information of coal-bearing reservoir on seismic data. Previous researchers have studied the reservoir by stripping or weakening the strong reflection, but it is difficult to determine the effectiveness of the remaining reflection seismic data. In this paper, through the establishment of 2D forward model of coal-bearing strata, the corresponding geophysical characteristics of different reflection types of coal-bearing strata are analyzed, and then the favorable sedimentary facies zones for reservoir development are predicted. On this basis, combined with seismic properties, the coal-bearing reservoir is quantitatively characterized by seismic inversion. The above research shows that the Taiyuan formation in LS block of Ordos Basin is affected by coals and forms three or two peaks in different locations. The reservoir plane sedimentary facies zone is effectively characterized by seismic reflection structure. Based on the characteristics of sedimentary facies belt and petrophysical analysis, the reservoir is semi quantitatively characterized by attribute analysis and waveform indication, and quantitatively characterized by pre stack geostatistical inversion. Based on the forward analysis of coal measure strata, this technology characterizes the reservoir facies belt through seismic reflection characteristics, and describes coal measure reservoirs step by step. It effectively guides the exploration of LS block in Ordos Basin, and has achieved good practical application effect.展开更多
The investigation of the tectonic deformation characteristics at the front margin of the Xu-Su arc tectonic belt provides important reference points for identifying and analyzing its genetic mechanism,tectonic evoluti...The investigation of the tectonic deformation characteristics at the front margin of the Xu-Su arc tectonic belt provides important reference points for identifying and analyzing its genetic mechanism,tectonic evolution process,and the latest evidence of tectonic deformation.In this study,two reflection seismic exploration profiles across the front margin of the Xu-Su arc tectonic belt are utilized to reveal that the Qinglongshan fault is the thrust fault of its front margin boundary.The kinematic properties and tectonic deformation characteristics of the internal faults in the front margin basin are also obtained.Using the Qinglongshan fault as the boundary,the middle and posterior margins of the Xu-Su arc tectonic belt are composed of numerous thrust faults,which suggest strong ancient tectonic movement.However,a large number of normal faults are developed within the front margin basin,with some faults exhibiting strike-slip and growth properties,which indicate strong neotectonic movement.Results reveal that the Xu-Su arc tectonic belt is a large-scale thrust-nappe structure that has undergone structural inversion.The Xu-Su arc tectonic belt experienced strong tectonic activity during the Middle Pleistocene,and the most recent tectonic deformation has extended into the front margin basin interior.展开更多
The Qiongdongnan Basin（QDNB） is situated in the extensional zone at the vertex of the V-shaped northwest sub-basin, non-volcanic northern margin of the South China Sea（SCS）. From north to south, the thickness of t...The Qiongdongnan Basin（QDNB） is situated in the extensional zone at the vertex of the V-shaped northwest sub-basin, non-volcanic northern margin of the South China Sea（SCS）. From north to south, the thickness of the continental lithosphere decreases from 22 km on the northern continental shelf to 17 km at the deepest area of the central depression. A sharp change on the crustal structure is of importance to hydrocarbon exploration yet the dynamic causes remain unknown. A comprehensive study including （1） interpretation of seismic profiles,（2） P-wave velocity data modeling, and （3） magnetic anomalies analysis reveals that there are some high-density intrusions along the lithospheric thinning belt. Chaotic reflections can be found in the southwest of the QDNB, with a low velocity（〈3.4 km/s）, while in the center and the east, the intensively deformed strata passing towards the diapir flanks and their high velocities（〉6 km/s） suggest the existence of igneous diapirs. Diapirism differentiation are primarily achieved through analysis of the contact relationship and the thickness variations in the surrounding strata. The first phase of diapirism along the Songnan low uplift occurred in the Late Mesozoic, and the second phase of diapirism in a form of subsequent gas movement remained active until the Late Quaternary. The distribution and the evolution of the diapirs would have major implications for post-rift emplacement.展开更多
The Yinchuan basin,located on the western margin of the Ordos block,has the characteristics of an active continental rift.A NW-striking deep seismic reflection profile across the center of Yinchuan basin precisely rev...The Yinchuan basin,located on the western margin of the Ordos block,has the characteristics of an active continental rift.A NW-striking deep seismic reflection profile across the center of Yinchuan basin precisely revealed the fine structure of the crust.The images showed that the crust in the Yinchuan basin was characterized by vertical stratifications along a detachment located at a two-way travel time(TWT)of 8.0 s.The most outstanding feature of this seismic profile was the almost flat Mohorovicˇic′discontinuity(Moho)and a high-reflection zone in the lower crust.This sub-horizontal Moho conflicts with the general assumption of an uplifted Moho under sedimentary basins and continental rifts,and may indicate the action of different processes at depth during the evolution of sedimentary basins or rifts.We present a possible interpretation of these deep processes and the sub-horizontal Moho.The high-reflection zone,which consists of sheets of high-density,mantlederived materials,may have compensated for crustal thinning in the Yinchuan basin,leading to the formation of a sub-horizontal Moho.These high-density materials may have been emplaced by underplating with mantlesourced magma.展开更多
Statics are big challenges for the processing of deep reflection seismic data. In this paper several different statics solutions have been implemented in the processing of deep reflection seismic data in South China a...Statics are big challenges for the processing of deep reflection seismic data. In this paper several different statics solutions have been implemented in the processing of deep reflection seismic data in South China and their corresponding results have been compared in order to find proper statics solutions. Either statics solutions based on tomographic principle or combining the low-frequency components of field statics with the high-frequency ones of refraction statics can provide reasonable statics solutions for deep reflection seismic data in South China with very rugged surface topography, and the two statics solutions can correct the statics anomalies of both long spatial wavelengths and short ones. The surface-consistent residual static corrections can serve as the good compensations to the several kinds of the first statics solutions. Proper statics solutions can improve both qualities and reso- lutions of seismic sections, especially for the reflections of Moho in the upmost mantle.展开更多
A 400 km-long wide-angle seismic experiment along Lianxian-Gangkou profile in South China was carried out to study contact relationship between southeast continental margin of Yangtze block and northwest continental m...A 400 km-long wide-angle seismic experiment along Lianxian-Gangkou profile in South China was carried out to study contact relationship between southeast continental margin of Yangtze block and northwest continental margin of Cathaysia block. We reconstructed crustal wide-angle reflection structure by the depth-domain pre-stack migration and the crustal velocity model constructed from the traveltime fitting. The wide-angle reflection section shows different reflection （from crystalline basement and Moho） pattern beneath the Yangtze and Cathaysia blocks, and suggests the Wuchuan-Sihui fault is the boundary between them. A cluster of well-developed reflections on Moho and in its underlying topmost mantle probably comes from alternative thin layers, which may be seismic signature of strong interaction between crust and mantle in the tectonic environment of lithosphere extension.展开更多
Seismic wave modeling is a cornerstone of geophysical data acquisition, processing, and interpretation, for which finite-difference methods are often applied. In this paper, we extend the velocity- pressure formulatio...Seismic wave modeling is a cornerstone of geophysical data acquisition, processing, and interpretation, for which finite-difference methods are often applied. In this paper, we extend the velocity- pressure formulation of the acoustic wave equation to marine seismic modeling using the staggered-grid finite-difference method. The scheme is developed using a fourth-order spatial and a second-order temporal operator. Then, we define a stability coefficient (SC) and calculate its maximum value under the stability condition. Based on the dispersion relationship, we conduct a detailed dispersion analysis for submarine sediments in terms of the phase and group velocity over a range of angles, stability coefficients, and orders. We also compare the numerical solution with the exact solution for a P-wave line source in a homogeneous submarine model. Additionally, the numerical results determined by a Marmousi2 model with a rugged seafloor indicate that this method is sufficient for modeling complex submarine structures.展开更多
The existing seismic reflection pattern classification methods need to convert multidimensional prestack seismic data into one-dimensional vectors for processing,which loses the characteristics of amplitude variation ...The existing seismic reflection pattern classification methods need to convert multidimensional prestack seismic data into one-dimensional vectors for processing,which loses the characteristics of amplitude variation with offset/azimuth in the prestack seismic data.In this study,a tensor discriminant dictionary learning method for classifying prestack seismic reflection patterns is proposed.The method is initially based on the tensor Tucker decomposition algorithm and uses a tensor form to characterize the prestack seismic data with multidimensional features.The tensor discriminant dictionary is then used to reduce the influence of noise on the sample features.Finally,the method uses the Pearson correlation coefficient to measure the correlation degree of the sparse representation coefficients of different types of tensors.The advantages of the new method are as follows.(1)It can retain the rich structural features in different dimensions in the prestack data.(2)It adjusts the threshold of the Pearson correlation coefficient to optimize the classification effect.(3)It fully uses drilling information and expert knowledge and performs calibration training of the sample labels.The numerical-model tests confirm that the new method is more accurate and robust than the traditional support vector machine and K-nearest neighbor classification algorithms.The application of actual data further confirms that the classification results of the new method agree with the geological patterns and are more suitable for the analysis and interpretation of sedimentary facies.展开更多
Shallow shear-wave seismic reflection imaging, using a sledgehammer and mass energy source and standard processing, has become increasingly common in mapping near-surface geologic features, especially in water-saturat...Shallow shear-wave seismic reflection imaging, using a sledgehammer and mass energy source and standard processing, has become increasingly common in mapping near-surface geologic features, especially in water-saturated, unconsolidated sediments. Tests of the method in the Mississippi Embayment region of the central United States show interpretable reflection arrivals in the depth range of 〈10 m to 〉100 m with the potential for increased resolution when compared with compressional-wave data. Shear-wave reflection prof＇des were used to help interpret the significance of neotectonic surface deformation at five sites in the Mississippi Embayment. The interpreted profiles show a range of shallow structural styles that include reverse faulting, fault propagation folding, and reactivated normal faulting, and provide crucial subsurface evidence in support of paleoseismologic trenching and shallow drilling.展开更多
Through discussion of the time-distance curve characteristics of the direct waveand from the front,side and rear of the reflection waves of the seismic reflection methodfor advanced exploration in mines,and analysis o...Through discussion of the time-distance curve characteristics of the direct waveand from the front,side and rear of the reflection waves of the seismic reflection methodfor advanced exploration in mines,and analysis of several major interference waves inmines,the differences in time-distance curve,frequency,apparent velocity between theeffective wave and interference wave in the seismic reflection method for advanced explorationare obtained.According to the differences,the effective wave is extracted andthe interference wave is filtered and the system's precision and accuracy is improved.展开更多
The Qinling orogen was formed as a result of the collision between the North and South China blocks. The Qinling orogen represents the location at which the southern and northern parts of the Chinese mainland col- lid...The Qinling orogen was formed as a result of the collision between the North and South China blocks. The Qinling orogen represents the location at which the southern and northern parts of the Chinese mainland col- lided, and it＇s also the intersection of the Central China orogen and the north-south tectonic belt. There is evidence of strong deformation in this orogen, and it has had a long and complex geological history. We investigated the structure of the Moho in the southern Qinling orogen using large dynamite shot imaging techniques. By integrating the analysis of the single-shot and the move-out corrections profile, we determined the structure of the Moho beneath the northern Dabashan thrust belt and the southern Qinling orogen, including the mantle suture beneath Fenghuang mountain. The Moho is divided into two parts by the mantle suture zone beneath Fenghuang mountain： （1） from Ziyang to Hanyin, the north-dipping Moho is at about 45-55 km depth and the depth increases rapidly; and （2） from Hanyin to Ningshan, the south-dipping Moho is at about 40-45 km depth and shallows slowly. The mantle suture is located beneath Fenghuang mountain, and the Moho overlaps at this location： the shallower Moho is connected to the northern part of China, and the deeper Moho is connected to the southern part. This may indicate that the lithosphere in the Sichuan basin subducts to the Qinling block and that the subduction frontier reaches at least as far as Fenghuang mountain.展开更多
More than 4 000 km 48-channel seismic reflection data from the central region of the South China Sea have been interpreted. Five seismic interfaces have been distinguished, named T1, T2, T4, T6 and Tg respectively Mea...More than 4 000 km 48-channel seismic reflection data from the central region of the South China Sea have been interpreted. Five seismic interfaces have been distinguished, named T1, T2, T4, T6 and Tg respectively Meanwhile, five seismic sequences numbered I - V have been divided with the ages of Quaternary and Pliocene, Later Mocene, Earlier and Middle Miocene, Oligocene and Pre- Oligocene separately. Sequences I-II overlie all parts of the area. In the continental slope and island slope, Sequences III-V are mainly found in the grabens. Sequence III is found at moot profiles of the deep-sea basin, and Sequnce IV is seen not only at the margins of the east subbasin but also at the margins of the southwest subbasin. Strong reflection from Moho is found at most profiles of the deep-sea basin. The depth of Moho varies between 10 and 12 km, with a thickness of 6- 8 km for the crust. Calculated by age-basement depth correlation formula, the age of basaltic basement in the southwest subbasin is 51-39 Ma. It is indicated that the evolution of the southwest subbasin is simultaneous with or earlier than that of the east subbasin.展开更多
Seismic wave reflection method is an advanced geophysical detection method in tunnel geological prediction.It is more sensitive and effective in detecting geological anomalies such as fault fracture zone and karst.In ...Seismic wave reflection method is an advanced geophysical detection method in tunnel geological prediction.It is more sensitive and effective in detecting geological anomalies such as fault fracture zone and karst.In order to verify the prediction efficacy and accuracy of the seismic wave reflection method with different instruments and equipment(tunnel geological prediction[TGP]/tunnel seismic prediction[TSP])and different vibration modes(hammering,explosives),a comparison test was carried out in Jinping Tunnel.The test results showed that the time-consumption of the hammering source was short,which can greatly reduce the impact on the construction site;different vibration sources methods of seismic wave reflection can predict the unfavorable geological sections accurately.展开更多
Owing to extreme topography,rapid velocity and thickness variation of near-surface layer and strong seismic attenuation through the thickest crust of the Earth,it is not easy to acquire reflective Moho in central Xiza...Owing to extreme topography,rapid velocity and thickness variation of near-surface layer and strong seismic attenuation through the thickest crust of the Earth,it is not easy to acquire reflective Moho in central Xizang.However,with help from the SinoProbe deep seismic reflection experiment,large explosive of 1000 kg seismic sources have been tentatively detonated in the Qiangtang terrane and good quality data were acquired.展开更多
The studies on configuration, character/property of the basement of Qiangtang basin is helpful for evaluating petroleum and nature gas resources as well as understanding the basin evolvement. Recently a moderate to hi...The studies on configuration, character/property of the basement of Qiangtang basin is helpful for evaluating petroleum and nature gas resources as well as understanding the basin evolvement. Recently a moderate to high-grade metamorphic gneiss rock was found underlying beneath very low metamorphic Ordovician strata in Mayer Kangri to the north of the central uplift. That fact actually proved existence of the crystalline basement just the distribution and structures of pre-Paleozoic crystalline basement still remain puzzle. In recent years a number of active sources deep seismic profiling, to aim at lithospheric structure of northern Tibet and petroleum resources of the Qiangtang basin, had been conducted that make it possible to image the structure of the basement of the Qiangtang. Near vertical reflection profiles, included those acquired previously and those during 2004 to 2008, have been utilized in this study. By through the interaction process and interpretation between the reflection profiles and the wide-angle profile, a model with the detailed structure and velocity distribution from surface to the depth of 20 km of Qiangtang basin has been imaged.Based on the results and discussions of this study, the preliminary conclusions are as follows： （1） The velocity structure section （~20 kin） that is interactively constrained by the refraction and reflection seismic data reveals that the sedimentary stratum gently lie until 10 km in the south Qiangtang basin. （2） The basement consists of fold basement （the upper） and crystalline basement （the lower）.The fold basement buried at the average depth of 6 km with a velocity of 5.2-5.8 km/s. The shallowest appear at range of the central uplift. The crystalline basement is underlying beneath the fold basement at the average depth of 10 km with a velocity of 5.9-6.0 km/s except near Bangong-Nujiang suture. （3） The high-velocity body at the depth range of 3-6 km of the central uplift is considered as a fragment of the crystalline basement that perhaps was raised by Thermal or deformation. （4） The lower-consolidated fold basement show more affinity of Yangtze block but the crystalline basement seems more approximate to Lhasa terrene in geophysical nature. We have attempted to improve the resolution and reliability by interaction of the active seismic data and prove it effective to image complex basement structure. It will be a potential to process the piggy-back acquisition data and has wide prospects.展开更多
Deep drilling data on seismogenic faults that are obtained directly can help in understanding earthquake mechanisms and the resulting changes in deep structure and material composition.However,geophysical data are nec...Deep drilling data on seismogenic faults that are obtained directly can help in understanding earthquake mechanisms and the resulting changes in deep structure and material composition.However,geophysical data are necessary to ensure that the planned borehole accurately drills through the target faults.In this study,the deep crustal structure of the Longmenshan fault is explored to obtain seismogenic fault characteristics of the Wenchuan earthquake.A scientific drilling project,Wenchuan Earthquake Fault Scientific Drilling No.4 Borehole(WFSD-4)is proposed with a borehole designed to drill through the north section of the fault zone while penetrating as many geological bodies and target layers related to seismogenic fault slip as possible.High-precision seismic exploration is then carried out to study the deep structure of the fault zone and achieve the scientific objective of the borehole.Two high-precision deep seismic reflection lines were arranged perpendicularly to the fault zone,and data were obtained through special acquisition schemes and processing methods.Finally,the surface position and drilling depth route of WFSD-4 are determined based on the interpretation results of seismic profiles.The seismic reflection method for site selection of the Wenchuan earthquake fault scientific drilling is proven feasible by comparing the interpretation with the actual drilling results,laying the foundation for further study on the deep structures of fault zones.展开更多
"bright spot" on reflection seismic profile has been regarded as one of the important indications of oil and gas,and it has been widely used in the oil and gas exploration. Moreover,with the development of n..."bright spot" on reflection seismic profile has been regarded as one of the important indications of oil and gas,and it has been widely used in the oil and gas exploration. Moreover,with the development of new technologies,"bright spot" technique has been gradually applied to the exploration of coal,underground water and other fields,and also in the research of deep structure of the earth. Based on the reviewing of published literatures,the authors described the structural features and generation of "bright spot" on seismic profile for energy resources exploration and crustal-scale deep seismic reflection profiles,and further summarized the applications of the "bright spot"technique in energy resource exploration and deep structure research.展开更多
The method and principle of common offset seismic surveys as well as the field data gathering and processing technique were introduced briefly. Through two urban active fault survey examples in Fuzhou and Shenyang, th...The method and principle of common offset seismic surveys as well as the field data gathering and processing technique were introduced briefly. Through two urban active fault survey examples in Fuzhou and Shenyang, the efficiency and limitation of using the common offset seismic reflection technique to carry out urban active fault surveys were probed. The results show that this technique has the properties of high resolving power, better reconstruction of subsurface structures, and real-time analyzing and interpretation of investigation results on site. This method can be used to quickly locate objects under investigation accurately in the areas with thinner Quaternary overburdens and strong bedrock interface fluctuations.展开更多
In this paper, we demonstrate the high resolution seismic reflection data for a depth range of several hundred meters across the Fenhe fault in Taiyuan city, China. In combination with the relevant borehole logs, thes...In this paper, we demonstrate the high resolution seismic reflection data for a depth range of several hundred meters across the Fenhe fault in Taiyuan city, China. In combination with the relevant borehole logs, these data provide useful constraints on the accurate position, geometry and deformation rate of the fault, as well as the kinematics of recent fault motion. The high resolution seismic reflection profiling revealed that the western branch of the Fenhe fault is a high angle, eastward dipping, oblique normal fault, and cutting up to the lower part of the Quaternary system. It was revealed that the top breaking point of this fault is at a depth of ～70m below the ground surface. A borehole log across the Fenhe fault permitted us to infer that there are two high angle, oppositely dipping, oblique normal faults. The eastem branch lies beneath the eastern embankment of the Fenhe river, dipping to the west and cutting into the Holocene late Pleistocene strata with a maximum vertical offset of ～8m. Another borehole log across the northern segment of the Fenhe fault indicates that the western branch of this fault has cut into the Holocene late Pleistocene strata with a maximum vertical offset of ～6m. The above mentioned data provide a minimum average Pleistocene Holocene vertical slip rate of 0 06～0 08mm/a and a maximum average large earthquake recurrence interval of 5 0～6 7ka for the Fenhe fault.展开更多
Assessing subsurface characteristics and imaging geologic features （e.g., faults, cavities, low-velocity lay- ers, etc.） are typical problems in near-surface geophysics. These questions often have adverse geotechni-...Assessing subsurface characteristics and imaging geologic features （e.g., faults, cavities, low-velocity lay- ers, etc.） are typical problems in near-surface geophysics. These questions often have adverse geotechni-cal engineering implications, and can be especially acute when associated with high-hazard structures such as large earthen flood-control dams. Dam-related issues are becoming more frequent in the United States, because a large part of this major infrastructure was designed and constructed in the early- to mid-twentieth century; these dams are thus passing into the latter stages of their design life, where minute flaws that were overlooked or thought to be insignificant in design/construction are now proving problematic. The high-hydraulic heads associated with these structures can quicken degra-dation of weak areas and compromise long-term integrity. Addressing dam-related problems solely with traditional invasive drilling techniques is often inadequate （i.e., lack of lateral resolution） and]or econom- ically exorbitant at this scale. However, strategic geotechnical drilling integrated with the broad utility of near-surface geophysics, particularly the horizontally polarized shear-wave （SH-mode） seismic-reflection technique for imaging the internal structural detail and geological foundation conditions of earthfill embankment dams can cost-effectively improve the overall subsurface definition needed for remedial engineering. Demonstrative evidence for this supposition is provided in the form of SH-wave seismic-reflection imaging of in situ and engineered as-built components of flood-control embankment dams at two example sites in the central United States.展开更多
文摘Taiyuan formation is the main exploration strata in Ordos Basin, and coals are widely developed. Due to the interference of strong reflection of coals, we cannot completely identify the effective reservoir information of coal-bearing reservoir on seismic data. Previous researchers have studied the reservoir by stripping or weakening the strong reflection, but it is difficult to determine the effectiveness of the remaining reflection seismic data. In this paper, through the establishment of 2D forward model of coal-bearing strata, the corresponding geophysical characteristics of different reflection types of coal-bearing strata are analyzed, and then the favorable sedimentary facies zones for reservoir development are predicted. On this basis, combined with seismic properties, the coal-bearing reservoir is quantitatively characterized by seismic inversion. The above research shows that the Taiyuan formation in LS block of Ordos Basin is affected by coals and forms three or two peaks in different locations. The reservoir plane sedimentary facies zone is effectively characterized by seismic reflection structure. Based on the characteristics of sedimentary facies belt and petrophysical analysis, the reservoir is semi quantitatively characterized by attribute analysis and waveform indication, and quantitatively characterized by pre stack geostatistical inversion. Based on the forward analysis of coal measure strata, this technology characterizes the reservoir facies belt through seismic reflection characteristics, and describes coal measure reservoirs step by step. It effectively guides the exploration of LS block in Ordos Basin, and has achieved good practical application effect.
基金The active fault exploration and seismic risk assessment project of Huaibei and the research and development project of Beijing Disaster Prevention Technology Co.,Ltd.(FZKJYF202201)jointly funded this work。
文摘The investigation of the tectonic deformation characteristics at the front margin of the Xu-Su arc tectonic belt provides important reference points for identifying and analyzing its genetic mechanism,tectonic evolution process,and the latest evidence of tectonic deformation.In this study,two reflection seismic exploration profiles across the front margin of the Xu-Su arc tectonic belt are utilized to reveal that the Qinglongshan fault is the thrust fault of its front margin boundary.The kinematic properties and tectonic deformation characteristics of the internal faults in the front margin basin are also obtained.Using the Qinglongshan fault as the boundary,the middle and posterior margins of the Xu-Su arc tectonic belt are composed of numerous thrust faults,which suggest strong ancient tectonic movement.However,a large number of normal faults are developed within the front margin basin,with some faults exhibiting strike-slip and growth properties,which indicate strong neotectonic movement.Results reveal that the Xu-Su arc tectonic belt is a large-scale thrust-nappe structure that has undergone structural inversion.The Xu-Su arc tectonic belt experienced strong tectonic activity during the Middle Pleistocene,and the most recent tectonic deformation has extended into the front margin basin interior.
基金supported by the National Natural Science Foundation of China (No. 41272121)the Major National Science and Technology Programs in the "Twelfth Five-Year" Plan of China (No. 2011ZX05025-002-02-02)the Fundamental Research Funds for the Central Universities (No. 16CX02038A)
文摘The Qiongdongnan Basin（QDNB） is situated in the extensional zone at the vertex of the V-shaped northwest sub-basin, non-volcanic northern margin of the South China Sea（SCS）. From north to south, the thickness of the continental lithosphere decreases from 22 km on the northern continental shelf to 17 km at the deepest area of the central depression. A sharp change on the crustal structure is of importance to hydrocarbon exploration yet the dynamic causes remain unknown. A comprehensive study including （1） interpretation of seismic profiles,（2） P-wave velocity data modeling, and （3） magnetic anomalies analysis reveals that there are some high-density intrusions along the lithospheric thinning belt. Chaotic reflections can be found in the southwest of the QDNB, with a low velocity（〈3.4 km/s）, while in the center and the east, the intensively deformed strata passing towards the diapir flanks and their high velocities（〉6 km/s） suggest the existence of igneous diapirs. Diapirism differentiation are primarily achieved through analysis of the contact relationship and the thickness variations in the surrounding strata. The first phase of diapirism along the Songnan low uplift occurred in the Late Mesozoic, and the second phase of diapirism in a form of subsequent gas movement remained active until the Late Quaternary. The distribution and the evolution of the diapirs would have major implications for post-rift emplacement.
基金This study was financed jointly by the Sino Probe Project of China(Sinoprobe-02-01)the National Natural Science Foundation of China(Nos.41430213,41274097,and 41404072)+1 种基金Geological Investigation Project of China Geological Survey(Nos.1212011220260 and 12120115027101)“Urban Active Fault Detection”of National Development and Reform Commission(No.20041138)
文摘The Yinchuan basin,located on the western margin of the Ordos block,has the characteristics of an active continental rift.A NW-striking deep seismic reflection profile across the center of Yinchuan basin precisely revealed the fine structure of the crust.The images showed that the crust in the Yinchuan basin was characterized by vertical stratifications along a detachment located at a two-way travel time(TWT)of 8.0 s.The most outstanding feature of this seismic profile was the almost flat Mohorovicˇic′discontinuity(Moho)and a high-reflection zone in the lower crust.This sub-horizontal Moho conflicts with the general assumption of an uplifted Moho under sedimentary basins and continental rifts,and may indicate the action of different processes at depth during the evolution of sedimentary basins or rifts.We present a possible interpretation of these deep processes and the sub-horizontal Moho.The high-reflection zone,which consists of sheets of high-density,mantlederived materials,may have compensated for crustal thinning in the Yinchuan basin,leading to the formation of a sub-horizontal Moho.These high-density materials may have been emplaced by underplating with mantlesourced magma.
基金supported by the Foundation of Institute of Geology,Chinese Academy of Geological Sciences (No. J1315)the 3D Geological Mapping Project (No. D1204)the SinoProbe-02 project of China
文摘Statics are big challenges for the processing of deep reflection seismic data. In this paper several different statics solutions have been implemented in the processing of deep reflection seismic data in South China and their corresponding results have been compared in order to find proper statics solutions. Either statics solutions based on tomographic principle or combining the low-frequency components of field statics with the high-frequency ones of refraction statics can provide reasonable statics solutions for deep reflection seismic data in South China with very rugged surface topography, and the two statics solutions can correct the statics anomalies of both long spatial wavelengths and short ones. The surface-consistent residual static corrections can serve as the good compensations to the several kinds of the first statics solutions. Proper statics solutions can improve both qualities and reso- lutions of seismic sections, especially for the reflections of Moho in the upmost mantle.
基金supported by the Chinese Academy of Sciences (KZCX2-YW-132)the National Natural Sciences Foundation of China(40721003, 40830315)
文摘A 400 km-long wide-angle seismic experiment along Lianxian-Gangkou profile in South China was carried out to study contact relationship between southeast continental margin of Yangtze block and northwest continental margin of Cathaysia block. We reconstructed crustal wide-angle reflection structure by the depth-domain pre-stack migration and the crustal velocity model constructed from the traveltime fitting. The wide-angle reflection section shows different reflection （from crystalline basement and Moho） pattern beneath the Yangtze and Cathaysia blocks, and suggests the Wuchuan-Sihui fault is the boundary between them. A cluster of well-developed reflections on Moho and in its underlying topmost mantle probably comes from alternative thin layers, which may be seismic signature of strong interaction between crust and mantle in the tectonic environment of lithosphere extension.
基金Supported by the National Natural Science Foundation of China(Nos. 41206043, 40930845)the Open Foundation of Key Laboratory of Marine Geology and Environment of Chinese Academy of Sciences(No. MGE2011KG07)+1 种基金the Knowledge Innovation Program of Chinese Academy of Sciences (No. KZCX2-YW-229)the National Basic Research Program of China (973 Program) (No. 2009CB219505)
文摘Seismic wave modeling is a cornerstone of geophysical data acquisition, processing, and interpretation, for which finite-difference methods are often applied. In this paper, we extend the velocity- pressure formulation of the acoustic wave equation to marine seismic modeling using the staggered-grid finite-difference method. The scheme is developed using a fourth-order spatial and a second-order temporal operator. Then, we define a stability coefficient (SC) and calculate its maximum value under the stability condition. Based on the dispersion relationship, we conduct a detailed dispersion analysis for submarine sediments in terms of the phase and group velocity over a range of angles, stability coefficients, and orders. We also compare the numerical solution with the exact solution for a P-wave line source in a homogeneous submarine model. Additionally, the numerical results determined by a Marmousi2 model with a rugged seafloor indicate that this method is sufficient for modeling complex submarine structures.
基金supported by the National Natural Science Foundation of China(Nos.42130812,42174151,and 41874155).
文摘The existing seismic reflection pattern classification methods need to convert multidimensional prestack seismic data into one-dimensional vectors for processing,which loses the characteristics of amplitude variation with offset/azimuth in the prestack seismic data.In this study,a tensor discriminant dictionary learning method for classifying prestack seismic reflection patterns is proposed.The method is initially based on the tensor Tucker decomposition algorithm and uses a tensor form to characterize the prestack seismic data with multidimensional features.The tensor discriminant dictionary is then used to reduce the influence of noise on the sample features.Finally,the method uses the Pearson correlation coefficient to measure the correlation degree of the sparse representation coefficients of different types of tensors.The advantages of the new method are as follows.(1)It can retain the rich structural features in different dimensions in the prestack data.(2)It adjusts the threshold of the Pearson correlation coefficient to optimize the classification effect.(3)It fully uses drilling information and expert knowledge and performs calibration training of the sample labels.The numerical-model tests confirm that the new method is more accurate and robust than the traditional support vector machine and K-nearest neighbor classification algorithms.The application of actual data further confirms that the classification results of the new method agree with the geological patterns and are more suitable for the analysis and interpretation of sedimentary facies.
基金supported by the U.S. Geological Survey, Department of the Interior
文摘Shallow shear-wave seismic reflection imaging, using a sledgehammer and mass energy source and standard processing, has become increasingly common in mapping near-surface geologic features, especially in water-saturated, unconsolidated sediments. Tests of the method in the Mississippi Embayment region of the central United States show interpretable reflection arrivals in the depth range of 〈10 m to 〉100 m with the potential for increased resolution when compared with compressional-wave data. Shear-wave reflection prof＇des were used to help interpret the significance of neotectonic surface deformation at five sites in the Mississippi Embayment. The interpreted profiles show a range of shallow structural styles that include reverse faulting, fault propagation folding, and reactivated normal faulting, and provide crucial subsurface evidence in support of paleoseismologic trenching and shallow drilling.
基金Supported by the National Natural Science Foundation of China(50375026)the National Basic Research Program of China(2005cb221500)+1 种基金the National Key Technology R&D Program(2006BAK03B01)the National Natural Science Foundation Key Program(50534080)
文摘Through discussion of the time-distance curve characteristics of the direct waveand from the front,side and rear of the reflection waves of the seismic reflection methodfor advanced exploration in mines,and analysis of several major interference waves inmines,the differences in time-distance curve,frequency,apparent velocity between theeffective wave and interference wave in the seismic reflection method for advanced explorationare obtained.According to the differences,the effective wave is extracted andthe interference wave is filtered and the system's precision and accuracy is improved.
基金funded by basic research funds of the Chinese Academy of Geological Sciences (J1628)the National Natural Science Foundation of China (Nos.441590863 and 41430213)+1 种基金the Ministry of Land and Resources of China (Nos.201311159Sino Probe-02-01)
文摘The Qinling orogen was formed as a result of the collision between the North and South China blocks. The Qinling orogen represents the location at which the southern and northern parts of the Chinese mainland col- lided, and it＇s also the intersection of the Central China orogen and the north-south tectonic belt. There is evidence of strong deformation in this orogen, and it has had a long and complex geological history. We investigated the structure of the Moho in the southern Qinling orogen using large dynamite shot imaging techniques. By integrating the analysis of the single-shot and the move-out corrections profile, we determined the structure of the Moho beneath the northern Dabashan thrust belt and the southern Qinling orogen, including the mantle suture beneath Fenghuang mountain. The Moho is divided into two parts by the mantle suture zone beneath Fenghuang mountain： （1） from Ziyang to Hanyin, the north-dipping Moho is at about 45-55 km depth and the depth increases rapidly; and （2） from Hanyin to Ningshan, the south-dipping Moho is at about 40-45 km depth and shallows slowly. The mantle suture is located beneath Fenghuang mountain, and the Moho overlaps at this location： the shallower Moho is connected to the northern part of China, and the deeper Moho is connected to the southern part. This may indicate that the lithosphere in the Sichuan basin subducts to the Qinling block and that the subduction frontier reaches at least as far as Fenghuang mountain.
文摘More than 4 000 km 48-channel seismic reflection data from the central region of the South China Sea have been interpreted. Five seismic interfaces have been distinguished, named T1, T2, T4, T6 and Tg respectively Meanwhile, five seismic sequences numbered I - V have been divided with the ages of Quaternary and Pliocene, Later Mocene, Earlier and Middle Miocene, Oligocene and Pre- Oligocene separately. Sequences I-II overlie all parts of the area. In the continental slope and island slope, Sequences III-V are mainly found in the grabens. Sequence III is found at moot profiles of the deep-sea basin, and Sequnce IV is seen not only at the margins of the east subbasin but also at the margins of the southwest subbasin. Strong reflection from Moho is found at most profiles of the deep-sea basin. The depth of Moho varies between 10 and 12 km, with a thickness of 6- 8 km for the crust. Calculated by age-basement depth correlation formula, the age of basaltic basement in the southwest subbasin is 51-39 Ma. It is indicated that the evolution of the southwest subbasin is simultaneous with or earlier than that of the east subbasin.
文摘Seismic wave reflection method is an advanced geophysical detection method in tunnel geological prediction.It is more sensitive and effective in detecting geological anomalies such as fault fracture zone and karst.In order to verify the prediction efficacy and accuracy of the seismic wave reflection method with different instruments and equipment(tunnel geological prediction[TGP]/tunnel seismic prediction[TSP])and different vibration modes(hammering,explosives),a comparison test was carried out in Jinping Tunnel.The test results showed that the time-consumption of the hammering source was short,which can greatly reduce the impact on the construction site;different vibration sources methods of seismic wave reflection can predict the unfavorable geological sections accurately.
基金the National Natural Science Foundation of China(Nos.41274096,41430213)the Ministry of Land and Resources of China(Nos.SinoProbe-02-01,201011040,SinoProbe-02-06,201011045).
文摘Owing to extreme topography,rapid velocity and thickness variation of near-surface layer and strong seismic attenuation through the thickest crust of the Earth,it is not easy to acquire reflective Moho in central Xizang.However,with help from the SinoProbe deep seismic reflection experiment,large explosive of 1000 kg seismic sources have been tentatively detonated in the Qiangtang terrane and good quality data were acquired.
基金supported by the National Natural Science Foundation of China (Grant Nos. 40874045 and 41174081)the Special Funds for Sciences and Technology Research of Public Welfare Trades (Grant No.201011042)
文摘The studies on configuration, character/property of the basement of Qiangtang basin is helpful for evaluating petroleum and nature gas resources as well as understanding the basin evolvement. Recently a moderate to high-grade metamorphic gneiss rock was found underlying beneath very low metamorphic Ordovician strata in Mayer Kangri to the north of the central uplift. That fact actually proved existence of the crystalline basement just the distribution and structures of pre-Paleozoic crystalline basement still remain puzzle. In recent years a number of active sources deep seismic profiling, to aim at lithospheric structure of northern Tibet and petroleum resources of the Qiangtang basin, had been conducted that make it possible to image the structure of the basement of the Qiangtang. Near vertical reflection profiles, included those acquired previously and those during 2004 to 2008, have been utilized in this study. By through the interaction process and interpretation between the reflection profiles and the wide-angle profile, a model with the detailed structure and velocity distribution from surface to the depth of 20 km of Qiangtang basin has been imaged.Based on the results and discussions of this study, the preliminary conclusions are as follows： （1） The velocity structure section （~20 kin） that is interactively constrained by the refraction and reflection seismic data reveals that the sedimentary stratum gently lie until 10 km in the south Qiangtang basin. （2） The basement consists of fold basement （the upper） and crystalline basement （the lower）.The fold basement buried at the average depth of 6 km with a velocity of 5.2-5.8 km/s. The shallowest appear at range of the central uplift. The crystalline basement is underlying beneath the fold basement at the average depth of 10 km with a velocity of 5.9-6.0 km/s except near Bangong-Nujiang suture. （3） The high-velocity body at the depth range of 3-6 km of the central uplift is considered as a fragment of the crystalline basement that perhaps was raised by Thermal or deformation. （4） The lower-consolidated fold basement show more affinity of Yangtze block but the crystalline basement seems more approximate to Lhasa terrene in geophysical nature. We have attempted to improve the resolution and reliability by interaction of the active seismic data and prove it effective to image complex basement structure. It will be a potential to process the piggy-back acquisition data and has wide prospects.
基金supported by the“Deep Structure and Variation Characteristics of Fracture Shear Band of the Longmenshan Fault Zone”of the National Natural Science Foundation of China (No.42174123)the“Wenchuan Earthquake Fault Scientific Drilling”of the National Science and Technology Planning Project and the“3D Geological Mapping of Longmenshan Fault Zone”Project of the CGS China Geological Survey (No.1212011220265).
文摘Deep drilling data on seismogenic faults that are obtained directly can help in understanding earthquake mechanisms and the resulting changes in deep structure and material composition.However,geophysical data are necessary to ensure that the planned borehole accurately drills through the target faults.In this study,the deep crustal structure of the Longmenshan fault is explored to obtain seismogenic fault characteristics of the Wenchuan earthquake.A scientific drilling project,Wenchuan Earthquake Fault Scientific Drilling No.4 Borehole(WFSD-4)is proposed with a borehole designed to drill through the north section of the fault zone while penetrating as many geological bodies and target layers related to seismogenic fault slip as possible.High-precision seismic exploration is then carried out to study the deep structure of the fault zone and achieve the scientific objective of the borehole.Two high-precision deep seismic reflection lines were arranged perpendicularly to the fault zone,and data were obtained through special acquisition schemes and processing methods.Finally,the surface position and drilling depth route of WFSD-4 are determined based on the interpretation results of seismic profiles.The seismic reflection method for site selection of the Wenchuan earthquake fault scientific drilling is proven feasible by comparing the interpretation with the actual drilling results,laying the foundation for further study on the deep structures of fault zones.
基金Supported by projects of National Key Research and Development of China(No.2016YFC0600301)National Natural Science Foundation of China(No.41674124)
文摘"bright spot" on reflection seismic profile has been regarded as one of the important indications of oil and gas,and it has been widely used in the oil and gas exploration. Moreover,with the development of new technologies,"bright spot" technique has been gradually applied to the exploration of coal,underground water and other fields,and also in the research of deep structure of the earth. Based on the reviewing of published literatures,the authors described the structural features and generation of "bright spot" on seismic profile for energy resources exploration and crustal-scale deep seismic reflection profiles,and further summarized the applications of the "bright spot"technique in energy resource exploration and deep structure research.
基金This research was supported by the project of "Experimental Prospecting of Active Fault in Urban Area"of the National Development and Reform Commission of China (Grant No.20041138)
文摘The method and principle of common offset seismic surveys as well as the field data gathering and processing technique were introduced briefly. Through two urban active fault survey examples in Fuzhou and Shenyang, the efficiency and limitation of using the common offset seismic reflection technique to carry out urban active fault surveys were probed. The results show that this technique has the properties of high resolving power, better reconstruction of subsurface structures, and real-time analyzing and interpretation of investigation results on site. This method can be used to quickly locate objects under investigation accurately in the areas with thinner Quaternary overburdens and strong bedrock interface fluctuations.
文摘In this paper, we demonstrate the high resolution seismic reflection data for a depth range of several hundred meters across the Fenhe fault in Taiyuan city, China. In combination with the relevant borehole logs, these data provide useful constraints on the accurate position, geometry and deformation rate of the fault, as well as the kinematics of recent fault motion. The high resolution seismic reflection profiling revealed that the western branch of the Fenhe fault is a high angle, eastward dipping, oblique normal fault, and cutting up to the lower part of the Quaternary system. It was revealed that the top breaking point of this fault is at a depth of ～70m below the ground surface. A borehole log across the Fenhe fault permitted us to infer that there are two high angle, oppositely dipping, oblique normal faults. The eastem branch lies beneath the eastern embankment of the Fenhe river, dipping to the west and cutting into the Holocene late Pleistocene strata with a maximum vertical offset of ～8m. Another borehole log across the northern segment of the Fenhe fault indicates that the western branch of this fault has cut into the Holocene late Pleistocene strata with a maximum vertical offset of ～6m. The above mentioned data provide a minimum average Pleistocene Holocene vertical slip rate of 0 06～0 08mm/a and a maximum average large earthquake recurrence interval of 5 0～6 7ka for the Fenhe fault.
文摘Assessing subsurface characteristics and imaging geologic features （e.g., faults, cavities, low-velocity lay- ers, etc.） are typical problems in near-surface geophysics. These questions often have adverse geotechni-cal engineering implications, and can be especially acute when associated with high-hazard structures such as large earthen flood-control dams. Dam-related issues are becoming more frequent in the United States, because a large part of this major infrastructure was designed and constructed in the early- to mid-twentieth century; these dams are thus passing into the latter stages of their design life, where minute flaws that were overlooked or thought to be insignificant in design/construction are now proving problematic. The high-hydraulic heads associated with these structures can quicken degra-dation of weak areas and compromise long-term integrity. Addressing dam-related problems solely with traditional invasive drilling techniques is often inadequate （i.e., lack of lateral resolution） and]or econom- ically exorbitant at this scale. However, strategic geotechnical drilling integrated with the broad utility of near-surface geophysics, particularly the horizontally polarized shear-wave （SH-mode） seismic-reflection technique for imaging the internal structural detail and geological foundation conditions of earthfill embankment dams can cost-effectively improve the overall subsurface definition needed for remedial engineering. Demonstrative evidence for this supposition is provided in the form of SH-wave seismic-reflection imaging of in situ and engineered as-built components of flood-control embankment dams at two example sites in the central United States.
