The global energy landscape is undergoing a profound transformation,with wind energy,especially wind power,gaining increasing prominence due to its clean,renewable nature.However,as the installed capacity of wind powe...The global energy landscape is undergoing a profound transformation,with wind energy,especially wind power,gaining increasing prominence due to its clean,renewable nature.However,as the installed capacity of wind power continues to expand,the disposal of waste wind turbine blades(WWTB)has emerged as a significant challenge.These blades are predominantly composed of epoxy resin(EP)polymers,carbon fibers(CFs),and glass fibers(GFs).Improper disposal not only exacerbates environmental concerns but also leads to the loss of valuable resources,particularly carbon-based materials.Pyrolysis technology,a versatile and environmentally sustainable method for resource recovery,has garnered considerable attention in the context of WWTB disposal.This work presents a comprehensive review of the pyrolytic recycling of WWTB,focusing on the principles and classifications of pyrolysis technology,key factors influencing the pyrolysis process,as well as the pyrolysis methods,equipment,products,and their applications.Through an in-depth analysis of the current research on the pyrolytic recycling of WWTB,this review identifies critical unresolved issues in the field and provides a forward-looking perspective on emerging research trends.展开更多
In this work,we report a fabrication of recyclable iron oxide decorated MoS_(2)nanosheets via a facile liq-uid exfoliation approach and solvothermal reaction for visible-light photodegradation of tetracycline.The prep...In this work,we report a fabrication of recyclable iron oxide decorated MoS_(2)nanosheets via a facile liq-uid exfoliation approach and solvothermal reaction for visible-light photodegradation of tetracycline.The prepared Fe_(3)O_(4)-MoS_(2)was characterized by X-ray diffraction,transmission electron microscopy,X-ray photoelectron spectros-copy,Raman spectroscopy,magnetic hysteresis,and nitrogen adsorption-desorption isotherms.Experimental results indicate that,successful attachment of Fe_(3)O_(4)nanoparticles to MoS_(2)sheets has been achieved.The enhanced surface area of Fe_(3)O_(4)-MoS_(2)induced high rates of adsorption and the adsorbed tetracycline was degraded to 90%after 150 min of visible exposure,which is better than that from pure MoS_(2).The introduction of Fe_(3)O_(4)not only enhances the photo-catalytic performance of Fe_(3)O_(4)-MoS_(2),but also enables its convenient recovery from water by an external magnetic field.Furthermore,both the photocatalytic activity and composite phase of Fe_(3)O_(4)-MoS_(2)were well-retained over cy-cles.Owing to its efficient photocatalytic activity,good stability and magnetic recyclability,the Fe_(3)O_(4)-MoS_(2)nano-composite is considered to be a promising photocatalyst for wastewater treatment.展开更多
With the start of the new year,Wen Congxiang,managing director of Ningbo Nuoding,a company specialising in the recycling of end-of-life vehicles,has been constantly on the move.Much of his time is spent coordinating w...With the start of the new year,Wen Congxiang,managing director of Ningbo Nuoding,a company specialising in the recycling of end-of-life vehicles,has been constantly on the move.Much of his time is spent coordinating with vehicle collection firms,electric bicycle manufacturers and recycled materials distributors,as he works to build partnerships focused on the targeted collection and distribution of recycled products.展开更多
In recent years,the amount of waste generated during milling has increased dramatically,and improper disposal poses a significant environmental challenge.To mitigate environmental pollution and enhance the road perfor...In recent years,the amount of waste generated during milling has increased dramatically,and improper disposal poses a significant environmental challenge.To mitigate environmental pollution and enhance the road performance of emulsified asphalt cold recycled mixtures(ECRM),this study employed recycled asphalt pavement(RAP)and reclaimed inorganic binder stabilized aggregate(RAI)as dual recycled materials for ECRM preparation.The blending ratios of reclaimed base and surface layer mixtures significantly influence ECRM's performance,with adjusted proportions substantially improving compressive strength and dynamic modulus.Firstly,three distinct proportioning options were developed for the recycled materials.Mix designs incorporating varying RAP/RAI ratios were used to determine the optimal mix parameters:moisture content,cement dosage,and emulsified asphalt content.Subsequently,comprehensive performance evaluations were conducted through high-temperature wheel tracking tests,freeze-thaw splitting tests,uniaxial compression tests,and dynamic modulus measurements to analyze the pavement characteristics of the three ECRM formulations.Experimental results demonstrate:Compared with ECRM with a blending ratio of RAP:RAI:new aggregate=30:50:20(Option 1),the dynamic stability,freeze-thaw splitting strength ratio,compressive strength,and compressive resilient modulus of ECRM under Option 3(RAP:RAI:new aggregate=50:30:20)decreased by 31.8%,5.2%,16.4%,and 13.1%,respectively.This indicates that increasing RAP content while reducing RAI proportion enhances the tensile strength of ECRM,yet adversely affects its high-temperature stability,moisture resistance,and compressive performance.This work not only addresses the challenge of jointly utilizing asphalt pavement waste and base waste,but also provides a cost-effective and sustainable method for the stable application of milling material resources in road engineering.展开更多
Concrete production often relies on natural aggregates,which can lead to resource depletion and environmental harm.In addition,improper disposal of thermoplastic waste exacerbates ecological problems.Although signific...Concrete production often relies on natural aggregates,which can lead to resource depletion and environmental harm.In addition,improper disposal of thermoplastic waste exacerbates ecological problems.Although significant attention has recently been given to recycling various waste materials into concrete,studies specifically addressing thermoplastic recycled aggregates are still trending.This underscores the need to comprehensively review existing literature,identify research trends,and recognize gaps in understanding the mechanical performance of thermoplastic-based recycled aggregate concrete.Accordingly,this review summarizes recent investigations focused on the mechanical properties of thermoplastic-based recycled aggregate concrete,emphasizing aspects such as compressive strength,tensile behavior,modulus of elasticity,and durability characteristics.The primary aim is to consolidate scattered research findings,identify key parameters influencing mechanical behavior,and propose future research directions.Understanding the influence of recycled thermoplastic aggregates on concrete performance significantly supports sustainable construction practices by reducing dependency on virgin aggregates and mitigating environmental impacts associated with waste disposal.In addition,assessing mechanical performance contributes to confidence in the practical application,encouraging the broader adoption of thermoplastic-based recycled aggregate concrete in construction projects.Through this critical synthesis,the review guides researchers and industry practitioners toward informed decisions on the feasibility and reliability of integrating thermoplastic waste into concrete,thereby promoting sustainable infrastructure development.展开更多
Recycling spent lithium-ion(Li+)batteries is critical for achieving environmental conservation and the strategic recovery of essential resources.Compared with conventional methods for recovering cathode materials,whic...Recycling spent lithium-ion(Li+)batteries is critical for achieving environmental conservation and the strategic recovery of essential resources.Compared with conventional methods for recovering cathode materials,which are energy-intensive and prone to secondary pollution,the direct regeneration approach has emerged as a rapid and highly efficient method,gaining widespread attention in recent years.However,this approach faces major challenges,including degraded electrochemical performances and limited economic value.This study,therefore,proposes a high-value direct regeneration strategy to convert degraded spent LiFePO_(4)(S-LFP)into a gradient manganese(Mn)-doped regenerated LiFe_(0.7)Mn_(0.3)PO_(4)/C(R-LFMP)composite.This method leverages the inherent microcracks and Li vacancies present in S-LFP,likely acting as diffusion channels for the Mn^(2+)/Li^(+)ions.Through a two-step mechanochemical ball-milling and carbothermal reduction process,this approach achieves simultaneous Li replenishment and surface-localised Mn gradient doping with enhanced structural control.Notably,the R-LFMP exhibits an exceptional electrochemical performance.At 0.1 C,it delivers a discharge capacity of 161.4 mA h g^(−1)and an energy density of 563.5 Wh kg^(−1)(representing a 60.5%improvement over S-LFP).Additionally,it maintains 83%capacity retention after 900 cycles at 0.5C,a considerable enhancement compared to commercial LFMP(62%).Furthermore,the regenerated cathode material generates a net profit of$7.102 kg^(−1),surpassing the profitability of conventional recycling methods by 90%.Overall,this study introduces a transformative and sustainable LFP regeneration technology,achieving breakthroughs in electrochemical restoration and high-value recycling,while paving the way for the closed-loop utilisation of LFP-based energy storage systems.展开更多
Growing demand for sustainable,high-performance materials is driving research to replace petroleumbased plastics with abundant biomass,especially cellulose.However,the effective modification and functionalization of c...Growing demand for sustainable,high-performance materials is driving research to replace petroleumbased plastics with abundant biomass,especially cellulose.However,the effective modification and functionalization of cellulose is often impeded by complex processing requirements and limited performance tunability.Here,an innovative“active”green medium strategy based on an ethyl cellulose/thymol eutectic system is reported,enabling in situ chemical modification of eutectic components and the construction of dynamic self-adaptive networks without external catalysts or initiators.Through precise molecular design,dynamic boroxine networks and acrylate crosslinking networks are synergistically integrated into the cellulosic bioplastic(CBP)matrix.The resulting CBP-A2B8 exhibits exceptional optical transparency(~85%),superior mechanical properties(tensile strength~30 MPa),facile thermal processability,and closed-loop recyclability.Its chemical structure and mechanical performance remain highly stable even after 20 hot-compression recycling cycles.Complete biodegradation occurs under natural environmental conditions within approximately 100 days.Furthermore,the bioplastic,when combined with silver nanowires,forms high-performance flexible transparent conductive films successfully applied in customizable electroluminescent devices.Post-lifecycle,device components(silver nanowires and CBP matrix)are efficiently separated and recycled using a straightforward solvent-based method.This eutectic system-mediated strategy offers a novel pathway for the development of sustainable,high-performance bioplastics with a closed-loop lifecycle.展开更多
This study introduces superabsorbent polymers(SAP)into recycled concrete and,through freeze-thaw cycle tests,unconfined compressive strength tests,and nuclear magnetic resonance(NMR)analysis,evaluates the freeze-thaw ...This study introduces superabsorbent polymers(SAP)into recycled concrete and,through freeze-thaw cycle tests,unconfined compressive strength tests,and nuclear magnetic resonance(NMR)analysis,evaluates the freeze-thaw resistance and durability of recycled concrete samples under varying freeze-thaw cycles.The results indicate that an appropriate addition of SAP significantly enhances the freeze-thaw resistance of recycled concrete.After 200 freeze-thaw cycles,the RS0.6 sample retained good surface integrity,demonstrating the best performance.Compared to NAC,its mass loss decreased by 1.16%,the relative dynamic modulus improved by 7.01%,and the compressive strength loss rate decreased by 5.41%.Additionally,T2 spectrum analysis revealed that adding SAP optimized the pore structure of recycled concrete and mitigated pore development during freeze-thaw cycles.As the number of freeze-thaw cycles increased,the RS0.3 and RS0.6 samples demonstrated superior frost resistance compared to NAC.However,an excessive amount of SAP increased pore expansion during subsequent freeze-thaw cycles,ultimately weakening frost resistance.展开更多
Citrus is the world's most produced fruit.With the rapid growth of citrus cultivation and processing industries globally,the volume of by-products,including dropped fruits,defective fruits,and waste generated duri...Citrus is the world's most produced fruit.With the rapid growth of citrus cultivation and processing industries globally,the volume of by-products,including dropped fruits,defective fruits,and waste generated during processing,has surged.Consequently,resource wastage and environmental pollution due to the low utilization rate of these by-products have become increasingly prominent issues.Currently,citrus by-products are directly utilized as seasonings,tea,and traditional Chinese medicine,or for the extraction of pectin,flavonoids,carotenoids,limonoids,essential oils,synephrine,and other functional ingredients.They are also processed into ethanol,citric acid,feed,and organic fertilizer through biomass fermentation.Despite these applications,the overall utilization rate of citrus by-products remains low.Additionally,there is a lack of key technologies and core equipment,and the production of high value-added functional products is limited.The future direction for citrus by-product utilization lies in green,low-carbon,high-efficiency,and high-value comprehensive recycling.To address the serious environmental pollution and recycling challenges posed by citrus rotting,it is proposed for the first time to develop new products and mold prevention strategies throughout the entire citrus supply chain-"Planting-field management-harvesting-transportation-storage"-to achieve a circular economy approach.This strategy aims to"Take from citrus and give back to citrus"effectively preventing and reducing citrus rotting.Furthermore,it can mitigate the significant economic losses caused by fruit decay and provide insights into the high-quality development of comprehensive citrus by-product utilization.展开更多
Reuse/recycling of expensive components in next-generation optoelectronic systems(e.g.,flexible electronics and foldable displays)for sustainability purposes impose stringent requirements on optically clear adhesive(O...Reuse/recycling of expensive components in next-generation optoelectronic systems(e.g.,flexible electronics and foldable displays)for sustainability purposes impose stringent requirements on optically clear adhesive(OCA)with on-demand adhesion/deadhesion capability.Although some hot-melt OCAs have been developed,there still remain great challenges in balancing the mechanical property,adhesion/detachment and recyclability/reusability of the OCAs.Herein,we developed a debondable and robust polyurethane(PU)-based optically clear adhesive with both mechanical and chemical recyclability,overcoming the critical bottlenecks in sustainable advanced manufacturing.The ductile yet strong PU-based OCAs not only can adhere to various optically transparent glass and polymeric substrates(with a bonding strength high up to 5.0 MPa),but also exhibit deadhesion capability at high temperature owing to the thermally sensitive H-bonding interaction within the polymer network.The ondemand adhesion/deadhesion facilitates non-destructive detachment of functional assemblies and materials recycling/repair.The mechanical and chemical recyclability of PU-based OCAs can also effectively reduce the cost and address the endof-life issues.Moreover,the PU-based OCAs outperformed some commercial optical adhesives.In view of the straightforward synthesis,easy industrial scale-up and exceptional comprehensive properties,the PU-based OCAs will provide promising transformative solutions for advancing the circular economy and sustainability in next-generation optoelectronic devices.展开更多
The rapid expansion of lithium-ion batteries in electric vehicles and grid-scale energy storage intensify the demand for sustainable recycling strategies.Traditional metallurgical recycling methods face significant ch...The rapid expansion of lithium-ion batteries in electric vehicles and grid-scale energy storage intensify the demand for sustainable recycling strategies.Traditional metallurgical recycling methods face significant challenges,including high energy consumption,environmental pollution,and inefficient critical metals recovery.In contrast,advanced direct recycling can selectively extract valuable metals while preserving cathode structure,achieving over 99%lithium recovery from lithium iron phosphate.Moreover,by directly repairing defects and crystal structures of spent materials,their electrochemical performance can be effectively restored.Due to significantly reduced energy and reagent inputs,direct recycling cuts processing costs by over 20% and reduces waste emissions by at least 40% compared to conventional methods,making it a promising low-carbon alternative.This review systematically integrates the recent advances in direct recycling of spent batteries as well as the limitations and challenges of existing technologies,and proposes future research pathways to promote resource recycling and sustainable development.展开更多
Europe is grappling with a colossal textile waste problem.Over 125 million tonnes of raw materials are devoured by the global industry each year,yet a mere fraction-less than 1%-of these fibres originate from recycled...Europe is grappling with a colossal textile waste problem.Over 125 million tonnes of raw materials are devoured by the global industry each year,yet a mere fraction-less than 1%-of these fibres originate from recycled textiles.The majority faces an unsustainable fate in landfills,incinerators,or is exported.A pivotal new report by Systemiq,"The Textile Recycling Breakthrough,"offers both a stark assessment and a strategic roadmap:Europe has the potential to amplify polyester textile recycling nearly tenfold by 2035,but this hinges on immediate,decisive action from policymakers and the industry.展开更多
Recycling of waste rubber(WR)is crucial for the sustainable development of the rubber industry.The enhancement of interfacial interactions is the main strategy for waste polymer recycling.However,there is a lack of me...Recycling of waste rubber(WR)is crucial for the sustainable development of the rubber industry.The enhancement of interfacial interactions is the main strategy for waste polymer recycling.However,there is a lack of methods for enhancing the interfacial interactions for WR recycling because WR contains abundant inert C―H bonds.Herein,we designed thioctic acid inverse vulcanization copolymers to endow recycled WR with dynamic disulfide interfacial interactions,significantly improving the mechanical properties of recycled WR.These disulfide interfacial interactions among the recycled WR tend to exchange,which dramatically increases the fractocohesive length and prevents stress concentration near the crack tips.When recycled WR is subjected to external stress,the loads are redistributed across a broad region of adjacent regions instead of being concentrated on a limited length scale,which resists crack propagation.This work effectively recycled WR,providing a strategy for solvent-free reaction-derived inverse vulcanization copolymers to improve the toughness of WR recycling.展开更多
Mantle geochemistry,a field that emerged in the mid-1970s,utilizes geochemical approaches to investigate the chemical composition and structure as well as the evolution and dynamics of Earth’s mantle.Since its establ...Mantle geochemistry,a field that emerged in the mid-1970s,utilizes geochemical approaches to investigate the chemical composition and structure as well as the evolution and dynamics of Earth’s mantle.Since its establishment,this field has become a key part of solid Earth Science and Planetary Science,demonstrating great vitality.The development of its theoretical framework began with the observation of mantle heterogeneity revealed by the radiogenic isotopic compositions of ocean island basalts(OIBs)and mid-ocean ridge basalts(MORBs),which in turn gave rise to the classic“crustal recycling”model.Based on this,a suite of globally representative mantle end-member components,namely DMM(Depleted MORB Mantle),EMI(Enriched Mantle I),EMII(Enriched Mantle II),HIMU(Highμ,μ=^(238)U/^(204)Pb)and PREMA(prevalent mantle),was identified,thereby establishing a comprehensive framework to characterize the geochemical structure and geodynamic system of the mantle.Over the past five decades,mantle geochemistry has advanced with new analytical techniques and theoretical development,greatly broadening its scope.It is now a key field within the Earth System Sciences,crucial for developing models of deep material cycling and surface environmental responses.Aiming to review the development of mantle geochemistry,this paper analyzes eight seminal studies focused on radiogenic isotopes,revisiting the establishment and evolution of mantle geochemistry,exploring the scientific vision of pioneers and highlighting the key topics that define this discipline.展开更多
We investigated the effects of fly ash(FA)content on the mechanical properties of recycled aggregate concrete(RAC)and its regeneration potential under freeze and thaw(F-T)cycles.The physical properties of second-gener...We investigated the effects of fly ash(FA)content on the mechanical properties of recycled aggregate concrete(RAC)and its regeneration potential under freeze and thaw(F-T)cycles.The physical properties of second-generation recycled concrete aggregates(RCA)were used to analyze the regeneration potential of RAC after F-T cycles.Scanning electron microscopy was used to study the interfacial transition zone microstructure of RAC after F-T cycles.Results showed that adding 20%FA to RAC significantly enhanced its mechanical properties and frost resistance.Before the F-T cycles,the compressive strength of RAC with 20%FA reached 48.3 MPa,exceeding research strength target of 40 MPa.A majority of second-generation RCA with FA had been verified to attain class Ⅲ,which enabled their practical application in non-structural projects such as backfill trenches and road pavement.However,the second-generation RCA with 20%FA can achieve class Ⅱ,making it ideal for 40 MPa structural concrete.展开更多
Current thermochromic materials for smart windows suffer from poor environmental stability,lack of self-healing and recyclability,and susceptibility to contamination.In this study,thermochromic supramolecular ionogels...Current thermochromic materials for smart windows suffer from poor environmental stability,lack of self-healing and recyclability,and susceptibility to contamination.In this study,thermochromic supramolecular ionogels with excellent environmental stability,efficient room-temperature self-healing and recyclability properties,as well as amphiphobic slippery surfaces,are fabricated by incorporating binary ionic liquids into a rationally designed self-healing polyurethane with perfluoroalkyl side chains.The outstanding and stable thermochromic performance of the resulting ionogels stems from the hydrogen bond-mediated,confined,and reversible phase separation of ionic liquids within the polyurethane network,enabling the ionogels to effectively reduce indoor temperatures and enhance the comfort of occupants.The surface-enriched perfluoroalkyl side chains enable various liquids,including water,alkanes,and edible oils,to easily slide off the ionogel surface without leaving any residue,preventing the transmittance decrease and thermochromic performance degradation caused by contaminations.The dynamic hydrogen bonds within the polyurethane network enable the ionogels to repeatedly heal physical and chemical damages,as well as to be recycled multiple times without performance loss,thereby reducing maintenance costs and minimizing material waste.This study provides a novel approach to developing advanced thermochromic materials for smart windows,potentially improving the building energy efficiency and sustainability.展开更多
PKU:The super fibers combine strength and toughness In impact protection applications such as ballistic armor,vehicle shielding,and aerospace,the dynamic strength and dynamic toughness of fiber materials are critical ...PKU:The super fibers combine strength and toughness In impact protection applications such as ballistic armor,vehicle shielding,and aerospace,the dynamic strength and dynamic toughness of fiber materials are critical performance indicators determining protective efficacy.However,widely used polymeric fibers still face significant challenges preventing full utilization of the material’s intrinsic strength and toughness.展开更多
Crushing waste coral concrete into recycled aggregates to create recycled coral aggregate concrete(RCAC)contributes to sustainable construction development on offshore islands and reefs.To investigate the impact of re...Crushing waste coral concrete into recycled aggregates to create recycled coral aggregate concrete(RCAC)contributes to sustainable construction development on offshore islands and reefs.To investigate the impact of recycled coral aggregate on concrete properties,this study performed a comprehensive analysis of the physical properties of recycled coral aggregate and the basic mechanical properties and microstructure of RCAC.The test results indicate that,compared to coral debris,the crushing index of recycled coral aggregate was reduced by 9.4%,while porosity decreased by 33.5%.Furthermore,RCAC retained the early strength characteristics of coral concrete,with compressive strength and flexural strength exhibiting a notable increase as the water-cement ratio decreased.Under identical conditions,the compressive strength and flexural strength of RCAC were 12.7% and 2.5% higher than coral concrete's,respectively,with porosity correspondingly reduced from 3.13% to 5.11%.This enhancement could be attributed to the new mortar filling the recycled coral aggregate.Scanning electron microscopy(SEM)analysis revealed three distinct interface transition zones within RCAC,with the‘new mortar-old mortar’interface identified as the weakest.The above findings provided a reference for the sustainable use of coral concrete in constructing offshore islands.展开更多
Industrial waste salts are commonly used to make value-added snow-melting agents to ensure traffic safety in northern China during winter and spring after snowfall.However,heavy metals in industrial waste salts may po...Industrial waste salts are commonly used to make value-added snow-melting agents to ensure traffic safety in northern China during winter and spring after snowfall.However,heavy metals in industrial waste salts may pose certain environmental risks.Snow-melting agents and snow samples were collected and analyzed from highways,arterial roads,footbridges,and other locations in Beijing after the snowstorm in December 2023.It was found that the main component of snow-melting agents was sodium chloride with high concentrations of Cu,Mn,and Zn,which are not regulated in the current policies,despite the recent promotion of environmentally friendly snow-melting agents.The Pb,Zn and Cr contents of some snow samples exceeded the limitation value of surface water quality standards,potentially affecting the soil and water environment near roadsides,although the snow-melting agents comply with relevant standards,which indicates the policy gap in the management of recycled industrial salts.We reviewed and analyzed the relevant standards for snow-melting agents and industrial waste salts proposed nationally and internationally over the past 30 years.Through comparative analysis,we proposed relevant policy recommendations to the existing quality standards of snow-melting agents and the management regulations of industrial waste salts,and the formulation of corresponding usage strategies,aimed at reducing the potential environmental release of heavy metals from the use of snow-melting agents,thereby promoting more sustainable green urban development and environmentally sound waste management.展开更多
Estimating the properties of foam-conditioned clay soils is important for both conditioning and recycling goals in earth pressure balance(EPB)shield tunneling.In this study,the vacuum dewatering behaviors of foam-cond...Estimating the properties of foam-conditioned clay soils is important for both conditioning and recycling goals in earth pressure balance(EPB)shield tunneling.In this study,the vacuum dewatering behaviors of foam-conditioned clay soils were investigated,with their potential use as an alternative means to assess foam optimization being examined.A series of laboratory and fieldtests was conducted,including vacuum dewatering tests that considered the effects of filtrationtime and pressure,vane shear tests,and improved cone pullout tests under different gravimetric water content(w)and foam injection ratio(FIR)conditions.It was found that the filtrate loss(FL),which characterizes dewaterability,was increased by extended vacuum filtrationtime and elevated pressure.While increases in w and FIR enhanced FL,reductions were observed in the undrained shear strength(cu),tangential adhesion stress(Fs),and normal adhesion stress(Fn).Furthermore,a linear decrease in FL with increasing mechanical indices(cu,Fs,and Fn)was demonstrated by both laboratory and fielddata fittingresults,regardless of w,FIR,and dewatering conditions.This study provides novel insights into the understanding of vacuum dewatering mechanisms in foam-conditioned clay soils,while a simple approach is proposed for evaluating foam conditioning effectiveness in EPB shield tunneling applications.展开更多
基金Supported by the National Natural Science Foundation of China(22468035,22468036,22368038,22308048)the Natural Science Foundation of Inner Mongolia(2024QN02018,2025MS02030)+2 种基金First-class Discipline Research Special Project of Inner Mongolia(YLXKZX-NGD-045)Inner Mongolia Autonomous Region Postgraduate Research Innovation Project(KC2024047B)Research Foundation for Introducing High-level Talents in Inner Mongolia Autonomous Region。
文摘The global energy landscape is undergoing a profound transformation,with wind energy,especially wind power,gaining increasing prominence due to its clean,renewable nature.However,as the installed capacity of wind power continues to expand,the disposal of waste wind turbine blades(WWTB)has emerged as a significant challenge.These blades are predominantly composed of epoxy resin(EP)polymers,carbon fibers(CFs),and glass fibers(GFs).Improper disposal not only exacerbates environmental concerns but also leads to the loss of valuable resources,particularly carbon-based materials.Pyrolysis technology,a versatile and environmentally sustainable method for resource recovery,has garnered considerable attention in the context of WWTB disposal.This work presents a comprehensive review of the pyrolytic recycling of WWTB,focusing on the principles and classifications of pyrolysis technology,key factors influencing the pyrolysis process,as well as the pyrolysis methods,equipment,products,and their applications.Through an in-depth analysis of the current research on the pyrolytic recycling of WWTB,this review identifies critical unresolved issues in the field and provides a forward-looking perspective on emerging research trends.
文摘In this work,we report a fabrication of recyclable iron oxide decorated MoS_(2)nanosheets via a facile liq-uid exfoliation approach and solvothermal reaction for visible-light photodegradation of tetracycline.The prepared Fe_(3)O_(4)-MoS_(2)was characterized by X-ray diffraction,transmission electron microscopy,X-ray photoelectron spectros-copy,Raman spectroscopy,magnetic hysteresis,and nitrogen adsorption-desorption isotherms.Experimental results indicate that,successful attachment of Fe_(3)O_(4)nanoparticles to MoS_(2)sheets has been achieved.The enhanced surface area of Fe_(3)O_(4)-MoS_(2)induced high rates of adsorption and the adsorbed tetracycline was degraded to 90%after 150 min of visible exposure,which is better than that from pure MoS_(2).The introduction of Fe_(3)O_(4)not only enhances the photo-catalytic performance of Fe_(3)O_(4)-MoS_(2),but also enables its convenient recovery from water by an external magnetic field.Furthermore,both the photocatalytic activity and composite phase of Fe_(3)O_(4)-MoS_(2)were well-retained over cy-cles.Owing to its efficient photocatalytic activity,good stability and magnetic recyclability,the Fe_(3)O_(4)-MoS_(2)nano-composite is considered to be a promising photocatalyst for wastewater treatment.
文摘With the start of the new year,Wen Congxiang,managing director of Ningbo Nuoding,a company specialising in the recycling of end-of-life vehicles,has been constantly on the move.Much of his time is spent coordinating with vehicle collection firms,electric bicycle manufacturers and recycled materials distributors,as he works to build partnerships focused on the targeted collection and distribution of recycled products.
基金sponsored by National Natural Science Foundation of China(No.52308466)SASAC Science and Technology Innovation Project(JF-23-01-0063)Shaanxi Provincial Transportation Research Project(25-84 K,25-85 K).
文摘In recent years,the amount of waste generated during milling has increased dramatically,and improper disposal poses a significant environmental challenge.To mitigate environmental pollution and enhance the road performance of emulsified asphalt cold recycled mixtures(ECRM),this study employed recycled asphalt pavement(RAP)and reclaimed inorganic binder stabilized aggregate(RAI)as dual recycled materials for ECRM preparation.The blending ratios of reclaimed base and surface layer mixtures significantly influence ECRM's performance,with adjusted proportions substantially improving compressive strength and dynamic modulus.Firstly,three distinct proportioning options were developed for the recycled materials.Mix designs incorporating varying RAP/RAI ratios were used to determine the optimal mix parameters:moisture content,cement dosage,and emulsified asphalt content.Subsequently,comprehensive performance evaluations were conducted through high-temperature wheel tracking tests,freeze-thaw splitting tests,uniaxial compression tests,and dynamic modulus measurements to analyze the pavement characteristics of the three ECRM formulations.Experimental results demonstrate:Compared with ECRM with a blending ratio of RAP:RAI:new aggregate=30:50:20(Option 1),the dynamic stability,freeze-thaw splitting strength ratio,compressive strength,and compressive resilient modulus of ECRM under Option 3(RAP:RAI:new aggregate=50:30:20)decreased by 31.8%,5.2%,16.4%,and 13.1%,respectively.This indicates that increasing RAP content while reducing RAI proportion enhances the tensile strength of ECRM,yet adversely affects its high-temperature stability,moisture resistance,and compressive performance.This work not only addresses the challenge of jointly utilizing asphalt pavement waste and base waste,but also provides a cost-effective and sustainable method for the stable application of milling material resources in road engineering.
文摘Concrete production often relies on natural aggregates,which can lead to resource depletion and environmental harm.In addition,improper disposal of thermoplastic waste exacerbates ecological problems.Although significant attention has recently been given to recycling various waste materials into concrete,studies specifically addressing thermoplastic recycled aggregates are still trending.This underscores the need to comprehensively review existing literature,identify research trends,and recognize gaps in understanding the mechanical performance of thermoplastic-based recycled aggregate concrete.Accordingly,this review summarizes recent investigations focused on the mechanical properties of thermoplastic-based recycled aggregate concrete,emphasizing aspects such as compressive strength,tensile behavior,modulus of elasticity,and durability characteristics.The primary aim is to consolidate scattered research findings,identify key parameters influencing mechanical behavior,and propose future research directions.Understanding the influence of recycled thermoplastic aggregates on concrete performance significantly supports sustainable construction practices by reducing dependency on virgin aggregates and mitigating environmental impacts associated with waste disposal.In addition,assessing mechanical performance contributes to confidence in the practical application,encouraging the broader adoption of thermoplastic-based recycled aggregate concrete in construction projects.Through this critical synthesis,the review guides researchers and industry practitioners toward informed decisions on the feasibility and reliability of integrating thermoplastic waste into concrete,thereby promoting sustainable infrastructure development.
基金supported by the National Key Research and Development Program of China(2023YFB3809300).
文摘Recycling spent lithium-ion(Li+)batteries is critical for achieving environmental conservation and the strategic recovery of essential resources.Compared with conventional methods for recovering cathode materials,which are energy-intensive and prone to secondary pollution,the direct regeneration approach has emerged as a rapid and highly efficient method,gaining widespread attention in recent years.However,this approach faces major challenges,including degraded electrochemical performances and limited economic value.This study,therefore,proposes a high-value direct regeneration strategy to convert degraded spent LiFePO_(4)(S-LFP)into a gradient manganese(Mn)-doped regenerated LiFe_(0.7)Mn_(0.3)PO_(4)/C(R-LFMP)composite.This method leverages the inherent microcracks and Li vacancies present in S-LFP,likely acting as diffusion channels for the Mn^(2+)/Li^(+)ions.Through a two-step mechanochemical ball-milling and carbothermal reduction process,this approach achieves simultaneous Li replenishment and surface-localised Mn gradient doping with enhanced structural control.Notably,the R-LFMP exhibits an exceptional electrochemical performance.At 0.1 C,it delivers a discharge capacity of 161.4 mA h g^(−1)and an energy density of 563.5 Wh kg^(−1)(representing a 60.5%improvement over S-LFP).Additionally,it maintains 83%capacity retention after 900 cycles at 0.5C,a considerable enhancement compared to commercial LFMP(62%).Furthermore,the regenerated cathode material generates a net profit of$7.102 kg^(−1),surpassing the profitability of conventional recycling methods by 90%.Overall,this study introduces a transformative and sustainable LFP regeneration technology,achieving breakthroughs in electrochemical restoration and high-value recycling,while paving the way for the closed-loop utilisation of LFP-based energy storage systems.
基金supported by the Jiangsu Provincial Natural Science Foundation(BK20240685)the Opening Project of Key Laboratory of Optoelectronic Chemical Materials and Devices,Ministry of Education,Jianghan University(JDGD202309)。
文摘Growing demand for sustainable,high-performance materials is driving research to replace petroleumbased plastics with abundant biomass,especially cellulose.However,the effective modification and functionalization of cellulose is often impeded by complex processing requirements and limited performance tunability.Here,an innovative“active”green medium strategy based on an ethyl cellulose/thymol eutectic system is reported,enabling in situ chemical modification of eutectic components and the construction of dynamic self-adaptive networks without external catalysts or initiators.Through precise molecular design,dynamic boroxine networks and acrylate crosslinking networks are synergistically integrated into the cellulosic bioplastic(CBP)matrix.The resulting CBP-A2B8 exhibits exceptional optical transparency(~85%),superior mechanical properties(tensile strength~30 MPa),facile thermal processability,and closed-loop recyclability.Its chemical structure and mechanical performance remain highly stable even after 20 hot-compression recycling cycles.Complete biodegradation occurs under natural environmental conditions within approximately 100 days.Furthermore,the bioplastic,when combined with silver nanowires,forms high-performance flexible transparent conductive films successfully applied in customizable electroluminescent devices.Post-lifecycle,device components(silver nanowires and CBP matrix)are efficiently separated and recycled using a straightforward solvent-based method.This eutectic system-mediated strategy offers a novel pathway for the development of sustainable,high-performance bioplastics with a closed-loop lifecycle.
基金Funded by the Science and Technology Program of Gansu Province(Nos.25JRRA497,23ZDFA017)the Strategic Priority Research Program of the Chinese Academy of Sciences(No.XDB0950000)High-level Talent Funding of Kashi。
文摘This study introduces superabsorbent polymers(SAP)into recycled concrete and,through freeze-thaw cycle tests,unconfined compressive strength tests,and nuclear magnetic resonance(NMR)analysis,evaluates the freeze-thaw resistance and durability of recycled concrete samples under varying freeze-thaw cycles.The results indicate that an appropriate addition of SAP significantly enhances the freeze-thaw resistance of recycled concrete.After 200 freeze-thaw cycles,the RS0.6 sample retained good surface integrity,demonstrating the best performance.Compared to NAC,its mass loss decreased by 1.16%,the relative dynamic modulus improved by 7.01%,and the compressive strength loss rate decreased by 5.41%.Additionally,T2 spectrum analysis revealed that adding SAP optimized the pore structure of recycled concrete and mitigated pore development during freeze-thaw cycles.As the number of freeze-thaw cycles increased,the RS0.3 and RS0.6 samples demonstrated superior frost resistance compared to NAC.However,an excessive amount of SAP increased pore expansion during subsequent freeze-thaw cycles,ultimately weakening frost resistance.
基金supported by the National Natural Science Foundation of China(82104340)。
文摘Citrus is the world's most produced fruit.With the rapid growth of citrus cultivation and processing industries globally,the volume of by-products,including dropped fruits,defective fruits,and waste generated during processing,has surged.Consequently,resource wastage and environmental pollution due to the low utilization rate of these by-products have become increasingly prominent issues.Currently,citrus by-products are directly utilized as seasonings,tea,and traditional Chinese medicine,or for the extraction of pectin,flavonoids,carotenoids,limonoids,essential oils,synephrine,and other functional ingredients.They are also processed into ethanol,citric acid,feed,and organic fertilizer through biomass fermentation.Despite these applications,the overall utilization rate of citrus by-products remains low.Additionally,there is a lack of key technologies and core equipment,and the production of high value-added functional products is limited.The future direction for citrus by-product utilization lies in green,low-carbon,high-efficiency,and high-value comprehensive recycling.To address the serious environmental pollution and recycling challenges posed by citrus rotting,it is proposed for the first time to develop new products and mold prevention strategies throughout the entire citrus supply chain-"Planting-field management-harvesting-transportation-storage"-to achieve a circular economy approach.This strategy aims to"Take from citrus and give back to citrus"effectively preventing and reducing citrus rotting.Furthermore,it can mitigate the significant economic losses caused by fruit decay and provide insights into the high-quality development of comprehensive citrus by-product utilization.
基金supported by the National Natural Science Foundation of China(52222302)。
文摘Reuse/recycling of expensive components in next-generation optoelectronic systems(e.g.,flexible electronics and foldable displays)for sustainability purposes impose stringent requirements on optically clear adhesive(OCA)with on-demand adhesion/deadhesion capability.Although some hot-melt OCAs have been developed,there still remain great challenges in balancing the mechanical property,adhesion/detachment and recyclability/reusability of the OCAs.Herein,we developed a debondable and robust polyurethane(PU)-based optically clear adhesive with both mechanical and chemical recyclability,overcoming the critical bottlenecks in sustainable advanced manufacturing.The ductile yet strong PU-based OCAs not only can adhere to various optically transparent glass and polymeric substrates(with a bonding strength high up to 5.0 MPa),but also exhibit deadhesion capability at high temperature owing to the thermally sensitive H-bonding interaction within the polymer network.The ondemand adhesion/deadhesion facilitates non-destructive detachment of functional assemblies and materials recycling/repair.The mechanical and chemical recyclability of PU-based OCAs can also effectively reduce the cost and address the endof-life issues.Moreover,the PU-based OCAs outperformed some commercial optical adhesives.In view of the straightforward synthesis,easy industrial scale-up and exceptional comprehensive properties,the PU-based OCAs will provide promising transformative solutions for advancing the circular economy and sustainability in next-generation optoelectronic devices.
基金supported by the National Science Fund for Distinguished Young Scholars(52425706)。
文摘The rapid expansion of lithium-ion batteries in electric vehicles and grid-scale energy storage intensify the demand for sustainable recycling strategies.Traditional metallurgical recycling methods face significant challenges,including high energy consumption,environmental pollution,and inefficient critical metals recovery.In contrast,advanced direct recycling can selectively extract valuable metals while preserving cathode structure,achieving over 99%lithium recovery from lithium iron phosphate.Moreover,by directly repairing defects and crystal structures of spent materials,their electrochemical performance can be effectively restored.Due to significantly reduced energy and reagent inputs,direct recycling cuts processing costs by over 20% and reduces waste emissions by at least 40% compared to conventional methods,making it a promising low-carbon alternative.This review systematically integrates the recent advances in direct recycling of spent batteries as well as the limitations and challenges of existing technologies,and proposes future research pathways to promote resource recycling and sustainable development.
文摘Europe is grappling with a colossal textile waste problem.Over 125 million tonnes of raw materials are devoured by the global industry each year,yet a mere fraction-less than 1%-of these fibres originate from recycled textiles.The majority faces an unsustainable fate in landfills,incinerators,or is exported.A pivotal new report by Systemiq,"The Textile Recycling Breakthrough,"offers both a stark assessment and a strategic roadmap:Europe has the potential to amplify polyester textile recycling nearly tenfold by 2035,but this hinges on immediate,decisive action from policymakers and the industry.
基金financially supported by the National Natural Science Foundation of China(No.52363007)。
文摘Recycling of waste rubber(WR)is crucial for the sustainable development of the rubber industry.The enhancement of interfacial interactions is the main strategy for waste polymer recycling.However,there is a lack of methods for enhancing the interfacial interactions for WR recycling because WR contains abundant inert C―H bonds.Herein,we designed thioctic acid inverse vulcanization copolymers to endow recycled WR with dynamic disulfide interfacial interactions,significantly improving the mechanical properties of recycled WR.These disulfide interfacial interactions among the recycled WR tend to exchange,which dramatically increases the fractocohesive length and prevents stress concentration near the crack tips.When recycled WR is subjected to external stress,the loads are redistributed across a broad region of adjacent regions instead of being concentrated on a limited length scale,which resists crack propagation.This work effectively recycled WR,providing a strategy for solvent-free reaction-derived inverse vulcanization copolymers to improve the toughness of WR recycling.
基金supported by the National Natural Science Foundation of China(Grant No.42130310).
文摘Mantle geochemistry,a field that emerged in the mid-1970s,utilizes geochemical approaches to investigate the chemical composition and structure as well as the evolution and dynamics of Earth’s mantle.Since its establishment,this field has become a key part of solid Earth Science and Planetary Science,demonstrating great vitality.The development of its theoretical framework began with the observation of mantle heterogeneity revealed by the radiogenic isotopic compositions of ocean island basalts(OIBs)and mid-ocean ridge basalts(MORBs),which in turn gave rise to the classic“crustal recycling”model.Based on this,a suite of globally representative mantle end-member components,namely DMM(Depleted MORB Mantle),EMI(Enriched Mantle I),EMII(Enriched Mantle II),HIMU(Highμ,μ=^(238)U/^(204)Pb)and PREMA(prevalent mantle),was identified,thereby establishing a comprehensive framework to characterize the geochemical structure and geodynamic system of the mantle.Over the past five decades,mantle geochemistry has advanced with new analytical techniques and theoretical development,greatly broadening its scope.It is now a key field within the Earth System Sciences,crucial for developing models of deep material cycling and surface environmental responses.Aiming to review the development of mantle geochemistry,this paper analyzes eight seminal studies focused on radiogenic isotopes,revisiting the establishment and evolution of mantle geochemistry,exploring the scientific vision of pioneers and highlighting the key topics that define this discipline.
基金Funded by the Natural Science Foundation of Jiangsu Province(No.BK20220626)the National Natural Science Foundation of China(No.52078068)+2 种基金Science and Technology Innovation Foundation of NIT(No.KCTD006)Jiangsu Marine Structure Service Performance Improvement Engineering Research CenterKey Laboratory of Jiangsu"Marine Floating Wind Power Technology and Equipment"。
文摘We investigated the effects of fly ash(FA)content on the mechanical properties of recycled aggregate concrete(RAC)and its regeneration potential under freeze and thaw(F-T)cycles.The physical properties of second-generation recycled concrete aggregates(RCA)were used to analyze the regeneration potential of RAC after F-T cycles.Scanning electron microscopy was used to study the interfacial transition zone microstructure of RAC after F-T cycles.Results showed that adding 20%FA to RAC significantly enhanced its mechanical properties and frost resistance.Before the F-T cycles,the compressive strength of RAC with 20%FA reached 48.3 MPa,exceeding research strength target of 40 MPa.A majority of second-generation RCA with FA had been verified to attain class Ⅲ,which enabled their practical application in non-structural projects such as backfill trenches and road pavement.However,the second-generation RCA with 20%FA can achieve class Ⅱ,making it ideal for 40 MPa structural concrete.
基金supported by the National Natural Science Foundation of China(22475082,21971083)。
文摘Current thermochromic materials for smart windows suffer from poor environmental stability,lack of self-healing and recyclability,and susceptibility to contamination.In this study,thermochromic supramolecular ionogels with excellent environmental stability,efficient room-temperature self-healing and recyclability properties,as well as amphiphobic slippery surfaces,are fabricated by incorporating binary ionic liquids into a rationally designed self-healing polyurethane with perfluoroalkyl side chains.The outstanding and stable thermochromic performance of the resulting ionogels stems from the hydrogen bond-mediated,confined,and reversible phase separation of ionic liquids within the polyurethane network,enabling the ionogels to effectively reduce indoor temperatures and enhance the comfort of occupants.The surface-enriched perfluoroalkyl side chains enable various liquids,including water,alkanes,and edible oils,to easily slide off the ionogel surface without leaving any residue,preventing the transmittance decrease and thermochromic performance degradation caused by contaminations.The dynamic hydrogen bonds within the polyurethane network enable the ionogels to repeatedly heal physical and chemical damages,as well as to be recycled multiple times without performance loss,thereby reducing maintenance costs and minimizing material waste.This study provides a novel approach to developing advanced thermochromic materials for smart windows,potentially improving the building energy efficiency and sustainability.
文摘PKU:The super fibers combine strength and toughness In impact protection applications such as ballistic armor,vehicle shielding,and aerospace,the dynamic strength and dynamic toughness of fiber materials are critical performance indicators determining protective efficacy.However,widely used polymeric fibers still face significant challenges preventing full utilization of the material’s intrinsic strength and toughness.
基金Funded by Natural Science Foundation of Guangxi(No.2025GXNSFBA069565)Guangxi Science and Technology Program(No.AD25069101)Guangxi Bagui Scholars Fund。
文摘Crushing waste coral concrete into recycled aggregates to create recycled coral aggregate concrete(RCAC)contributes to sustainable construction development on offshore islands and reefs.To investigate the impact of recycled coral aggregate on concrete properties,this study performed a comprehensive analysis of the physical properties of recycled coral aggregate and the basic mechanical properties and microstructure of RCAC.The test results indicate that,compared to coral debris,the crushing index of recycled coral aggregate was reduced by 9.4%,while porosity decreased by 33.5%.Furthermore,RCAC retained the early strength characteristics of coral concrete,with compressive strength and flexural strength exhibiting a notable increase as the water-cement ratio decreased.Under identical conditions,the compressive strength and flexural strength of RCAC were 12.7% and 2.5% higher than coral concrete's,respectively,with porosity correspondingly reduced from 3.13% to 5.11%.This enhancement could be attributed to the new mortar filling the recycled coral aggregate.Scanning electron microscopy(SEM)analysis revealed three distinct interface transition zones within RCAC,with the‘new mortar-old mortar’interface identified as the weakest.The above findings provided a reference for the sustainable use of coral concrete in constructing offshore islands.
基金supported by the National Natural Science Foundation of China(No.22176200)the Industrial Innovation Entrepreneurial Team Project of Ordos 2021.
文摘Industrial waste salts are commonly used to make value-added snow-melting agents to ensure traffic safety in northern China during winter and spring after snowfall.However,heavy metals in industrial waste salts may pose certain environmental risks.Snow-melting agents and snow samples were collected and analyzed from highways,arterial roads,footbridges,and other locations in Beijing after the snowstorm in December 2023.It was found that the main component of snow-melting agents was sodium chloride with high concentrations of Cu,Mn,and Zn,which are not regulated in the current policies,despite the recent promotion of environmentally friendly snow-melting agents.The Pb,Zn and Cr contents of some snow samples exceeded the limitation value of surface water quality standards,potentially affecting the soil and water environment near roadsides,although the snow-melting agents comply with relevant standards,which indicates the policy gap in the management of recycled industrial salts.We reviewed and analyzed the relevant standards for snow-melting agents and industrial waste salts proposed nationally and internationally over the past 30 years.Through comparative analysis,we proposed relevant policy recommendations to the existing quality standards of snow-melting agents and the management regulations of industrial waste salts,and the formulation of corresponding usage strategies,aimed at reducing the potential environmental release of heavy metals from the use of snow-melting agents,thereby promoting more sustainable green urban development and environmentally sound waste management.
基金supported by the National Youth Top-notch Talent Support Program of China(Grant No.00389335)the National Natural Science Foundation of China(Grant No.52378392)the“Foal Eagle Program”Youth Top-notch Talent Project of Fujian Province(Grant No.00387088).
文摘Estimating the properties of foam-conditioned clay soils is important for both conditioning and recycling goals in earth pressure balance(EPB)shield tunneling.In this study,the vacuum dewatering behaviors of foam-conditioned clay soils were investigated,with their potential use as an alternative means to assess foam optimization being examined.A series of laboratory and fieldtests was conducted,including vacuum dewatering tests that considered the effects of filtrationtime and pressure,vane shear tests,and improved cone pullout tests under different gravimetric water content(w)and foam injection ratio(FIR)conditions.It was found that the filtrate loss(FL),which characterizes dewaterability,was increased by extended vacuum filtrationtime and elevated pressure.While increases in w and FIR enhanced FL,reductions were observed in the undrained shear strength(cu),tangential adhesion stress(Fs),and normal adhesion stress(Fn).Furthermore,a linear decrease in FL with increasing mechanical indices(cu,Fs,and Fn)was demonstrated by both laboratory and fielddata fittingresults,regardless of w,FIR,and dewatering conditions.This study provides novel insights into the understanding of vacuum dewatering mechanisms in foam-conditioned clay soils,while a simple approach is proposed for evaluating foam conditioning effectiveness in EPB shield tunneling applications.
