Ordinary columns of jet grouting are circular or fan-shaped. But in recent years, such shapes as candy-shaped columns were put to practical use. They are constructed by switching the rotational speed of the stem in on...Ordinary columns of jet grouting are circular or fan-shaped. But in recent years, such shapes as candy-shaped columns were put to practical use. They are constructed by switching the rotational speed of the stem in one rotation. We applied this method to swing jet grouting. That is, we changed the rotational speeds in the swing jet grouting to make elongated columns near rectangle. The test construction was succeeded and the columns’ shapes conformed to those designed. In addition, the quality was confirmed to be as good as ordinary columns. Radii （distances from center to outer ends） were 1.03 to 1.21 times as large as those designed. Improvement ratios were 95% or more in any position. Strengths were varied by location, but they satisfied design strength 1.5 kN/m2 at any position. We concluded that this new column can be applied to practice in the same way as ordinary columns.展开更多
Generation of noise-like rectangular pulse was investigated systematically in an Er–Yb co-doped fiber laser based on an intra-cavity coupler with different coupling ratios.When the coupling ratio was 5/95,stable mode...Generation of noise-like rectangular pulse was investigated systematically in an Er–Yb co-doped fiber laser based on an intra-cavity coupler with different coupling ratios.When the coupling ratio was 5/95,stable mode-locked pulses could be obtained with the pulse packet duration tunable from 4.86 ns to 80 ns.The repetition frequency was 1.186 MHz with the output spectrum centered at 1.6μm.The average output power and single pulse energy reached a record 1.43 W and1.21μJ,respectively.Pulse characteristics under different coupling ratios(5/95,10/90,20/80,30/70,40/60)were also presented and discussed.展开更多
TiC-containing diamond-like carbon （TiC-DLC） nanocomposite coatings were deposited by a rectangular cathodic arc ion-plating system using C2H2 as reacting gas. Raman spectroscopy and transmission electron microscopy...TiC-containing diamond-like carbon （TiC-DLC） nanocomposite coatings were deposited by a rectangular cathodic arc ion-plating system using C2H2 as reacting gas. Raman spectroscopy and transmission electron microscopy analysis show that with increasing flow rate of C2H2, the structure of nanocomposite coatings changes from TiC nanograin-containing to graphite nanograin-containing DLC. The harness measurements show that the hardness decreases from 28 GPa to 18 GPa with increasing C2H2 flow rate. The scratch test show that a high critical load （〉40 N） was obtained and exhibited a good adhesion between the coating and the substrate. Wear experiment shows that the friction coefficient of TiC-DLC nanocomposite coatings decreases with increasing C2H2. A low friction coefficient of 0.07 was obtained at 480 sccm C2H2.展开更多
文摘Ordinary columns of jet grouting are circular or fan-shaped. But in recent years, such shapes as candy-shaped columns were put to practical use. They are constructed by switching the rotational speed of the stem in one rotation. We applied this method to swing jet grouting. That is, we changed the rotational speeds in the swing jet grouting to make elongated columns near rectangle. The test construction was succeeded and the columns’ shapes conformed to those designed. In addition, the quality was confirmed to be as good as ordinary columns. Radii （distances from center to outer ends） were 1.03 to 1.21 times as large as those designed. Improvement ratios were 95% or more in any position. Strengths were varied by location, but they satisfied design strength 1.5 kN/m2 at any position. We concluded that this new column can be applied to practice in the same way as ordinary columns.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61435009,61235008,and 61405254)
文摘Generation of noise-like rectangular pulse was investigated systematically in an Er–Yb co-doped fiber laser based on an intra-cavity coupler with different coupling ratios.When the coupling ratio was 5/95,stable mode-locked pulses could be obtained with the pulse packet duration tunable from 4.86 ns to 80 ns.The repetition frequency was 1.186 MHz with the output spectrum centered at 1.6μm.The average output power and single pulse energy reached a record 1.43 W and1.21μJ,respectively.Pulse characteristics under different coupling ratios(5/95,10/90,20/80,30/70,40/60)were also presented and discussed.
文摘TiC-containing diamond-like carbon （TiC-DLC） nanocomposite coatings were deposited by a rectangular cathodic arc ion-plating system using C2H2 as reacting gas. Raman spectroscopy and transmission electron microscopy analysis show that with increasing flow rate of C2H2, the structure of nanocomposite coatings changes from TiC nanograin-containing to graphite nanograin-containing DLC. The harness measurements show that the hardness decreases from 28 GPa to 18 GPa with increasing C2H2 flow rate. The scratch test show that a high critical load （〉40 N） was obtained and exhibited a good adhesion between the coating and the substrate. Wear experiment shows that the friction coefficient of TiC-DLC nanocomposite coatings decreases with increasing C2H2. A low friction coefficient of 0.07 was obtained at 480 sccm C2H2.
