Millimeter-wave traveling-wave tube （TWT） prevails nowadays as the amplifier for radar, communication and electronic countermeasures. The rectangular waveguide grating is a promising all-metal interaction circuit fo...Millimeter-wave traveling-wave tube （TWT） prevails nowadays as the amplifier for radar, communication and electronic countermeasures. The rectangular waveguide grating is a promising all-metal interaction circuit for the millimeter-wave TWT with advantages of high power capacity, fine heat dissipation, scalability to smaller dimen- sions for shorter wavelengths, compact structure and robust performance. Compared with the traditional closed structure, the open rectangular waveguide grating （ORWG） has wider bandwidth, lower cut-off frequency, and higher machining precision for higher working frequencies due to the open transverse. It is a potential structure that can work in the millimeter wave and even Terahertz band. The rf characteristics including dispersion and interaction impedance are investigated by both theoretic calculation and software simulation. The influences of the structure parameters are also discussed and compared, and the theoretical results agree well with the simula- tion results. Based on the study, the ORWG will favor the design of a broadband and high-power millimeter-wave TWT.展开更多
This paper focuses on a new rectangular waveguide grating Slow-Wave Structure (SWS) with cosine-shaped grooves and studies the propagation characteristics of the wave in the SWS. By using the approximate field-matchin...This paper focuses on a new rectangular waveguide grating Slow-Wave Structure (SWS) with cosine-shaped grooves and studies the propagation characteristics of the wave in the SWS. By using the approximate field-matching conditions,the dispersion equation and the coupling impedance of this circuit are obtained. The dispersion curves and coupling impedances of the fundamental wave are calculated and the influences of the various geometrical dimensions are discussed. The results show that the bandwidth of the cosine-shaped groove SWS is much wider than that of rectangular-shaped groove one. And reducing the groove width can broaden the frequency-band and decrease the phase-velocity,while increment of the groove-depth can also decrease phase-velocity. For above cases,the coupling impedance is more than 16Ω. The present analysis will be helpful on further study and design of the RF systems used in millimeter wave Traveling Wave Tube (TWT).展开更多
A slow-wave structure （SWS） with two opposite gratings inside a rectangular waveguide is presented and analysed. As an all-metal slow-wave circuit, this structure is especially suited for use in millimetre-wave trav...A slow-wave structure （SWS） with two opposite gratings inside a rectangular waveguide is presented and analysed. As an all-metal slow-wave circuit, this structure is especially suited for use in millimetre-wave travelling wave tubes （TWTs） due to its advantages of large size, high manufacturing precision and good heat dissipation. The first part of this paper concerns the wave properties of this structure in vacuum. The influence of the geometrical dimensions on dispersion characteristics and coupling impedance is investigated. The theoretical results show that this structure has a very strong dispersion and the coupling impedance for the fundamental wave is several tens of ohms, but the coupling impedance for -1 space harmonic wave is much lower than that for the fundamental wave, so the risk of backward wave oscillation is reduced. Besides these, the CST microwave studio is also used to simulate the dispersion property of the SWS. The simulation results from CST and the theoretical results agree well with each other, which supports the theory. In the second part, a small-signal analysis of a double rectangular waveguide grating TWT is presented. The typical small-signal gain per period is about 0.45 dB, and the 3-dB small-signal gain bandwidth is only 4%.展开更多
基金Supported by the National Natural Science Foundation of China under Grant No 61271029the National Science Fund for Distinguished Young Scholars of China under Grant No 61125103the National Research Foundation of Korea under Grant No MSIP:NRF-2009-0083512
文摘Millimeter-wave traveling-wave tube （TWT） prevails nowadays as the amplifier for radar, communication and electronic countermeasures. The rectangular waveguide grating is a promising all-metal interaction circuit for the millimeter-wave TWT with advantages of high power capacity, fine heat dissipation, scalability to smaller dimen- sions for shorter wavelengths, compact structure and robust performance. Compared with the traditional closed structure, the open rectangular waveguide grating （ORWG） has wider bandwidth, lower cut-off frequency, and higher machining precision for higher working frequencies due to the open transverse. It is a potential structure that can work in the millimeter wave and even Terahertz band. The rf characteristics including dispersion and interaction impedance are investigated by both theoretic calculation and software simulation. The influences of the structure parameters are also discussed and compared, and the theoretical results agree well with the simula- tion results. Based on the study, the ORWG will favor the design of a broadband and high-power millimeter-wave TWT.
文摘This paper focuses on a new rectangular waveguide grating Slow-Wave Structure (SWS) with cosine-shaped grooves and studies the propagation characteristics of the wave in the SWS. By using the approximate field-matching conditions,the dispersion equation and the coupling impedance of this circuit are obtained. The dispersion curves and coupling impedances of the fundamental wave are calculated and the influences of the various geometrical dimensions are discussed. The results show that the bandwidth of the cosine-shaped groove SWS is much wider than that of rectangular-shaped groove one. And reducing the groove width can broaden the frequency-band and decrease the phase-velocity,while increment of the groove-depth can also decrease phase-velocity. For above cases,the coupling impedance is more than 16Ω. The present analysis will be helpful on further study and design of the RF systems used in millimeter wave Traveling Wave Tube (TWT).
文摘A slow-wave structure （SWS） with two opposite gratings inside a rectangular waveguide is presented and analysed. As an all-metal slow-wave circuit, this structure is especially suited for use in millimetre-wave travelling wave tubes （TWTs） due to its advantages of large size, high manufacturing precision and good heat dissipation. The first part of this paper concerns the wave properties of this structure in vacuum. The influence of the geometrical dimensions on dispersion characteristics and coupling impedance is investigated. The theoretical results show that this structure has a very strong dispersion and the coupling impedance for the fundamental wave is several tens of ohms, but the coupling impedance for -1 space harmonic wave is much lower than that for the fundamental wave, so the risk of backward wave oscillation is reduced. Besides these, the CST microwave studio is also used to simulate the dispersion property of the SWS. The simulation results from CST and the theoretical results agree well with each other, which supports the theory. In the second part, a small-signal analysis of a double rectangular waveguide grating TWT is presented. The typical small-signal gain per period is about 0.45 dB, and the 3-dB small-signal gain bandwidth is only 4%.
