This study investigates the nonlinear dynamic properties of rotating functionally graded sandwich rectangular plates in a thermal environment.The nonlinear vibration equations for a rotating metal-ceramic functionally...This study investigates the nonlinear dynamic properties of rotating functionally graded sandwich rectangular plates in a thermal environment.The nonlinear vibration equations for a rotating metal-ceramic functionally graded sandwich rectangular plate in a thermal environment are derived using classical thin plate theory and Hamilton’s principle,considering geometric nonlinearity,temperature-dependent material properties,and power law distribution of components through the thickness.With cantilever boundary conditions,the flexural nonlinear differential equations of the rectangular sandwich plate are obtained via the Galerkin method.Since the natural vibration differential equations exhibit nonlinear characteristics,the multiscale method is employed to derive the expression for nonlinear natural frequency.An example analysis reveals how the natural frequency of a functionally graded sandwich rectangular plate varies with rotational speed and temperature.Results show that the nonlinear/linear frequency ratio increases with rotational angular velocity Ω and thickness-to-length ratio h/a,follows a cosine-like periodic pattern with the setting angle,and shows a sharp decrease followed by a rapid increase with increasing width-to-length ratio b/a.The derived analytical solutions for nonlinear frequency provide valuable insights for assessing the dynamic characteristics of functionally graded structures.展开更多
The bending of rectangular plate is divided into the generalized statically determinate bending and the generalized statically indeterminate bending based on the analysis of the completeness of calculating condition a...The bending of rectangular plate is divided into the generalized statically determinate bending and the generalized statically indeterminate bending based on the analysis of the completeness of calculating condition at the corner point. The former can be solved directly by the equilibrium differential equation and the boundary conditions of four edges of the plate. The latter can be solved by using the superposition principle. Making use of the recommended method, the bending of the plate with all kinds of...展开更多
In this paper the method of the reciprocal theorem (MRT) is extended to solve the steady state responses of rectangular plater under harmonic disturbing forces. A series of the closed solutions of rectangular plates w...In this paper the method of the reciprocal theorem (MRT) is extended to solve the steady state responses of rectangular plater under harmonic disturbing forces. A series of the closed solutions of rectangular plates with various boundary conditions are given and the tables and figures which have practical value are provided.MRT is a simple, convenient and general method for solving the steady stale responses of rectangular plates under various harmonic disturbing forces.The paper contains three parts: (I) rectangular plates with four damped edges and with three clamped edges; (II) rectangular plates with two adjacent clamped edges; (III) cantilever plates.We arc going to publish them one after another.展开更多
All possible exact solutions are successfully obtained in terms of 10 sets of distinct eigensolutions for the free in-plane vibration of isotropic rectangular plates. The plates have simply supported condition at two ...All possible exact solutions are successfully obtained in terms of 10 sets of distinct eigensolutions for the free in-plane vibration of isotropic rectangular plates. The plates have simply supported condition at two opposite edges and any combination of classical boundary conditions at the other two edges. The exact solutions are validated through both mathematical proof and comparisons with the solutions of differential quadrature method. Some unusual phenomena are revealed in free in-plane vibrations of rectangular plates due to one of the eigenvalues being zero. This work constitutes an improved version of very recent corresponding work by the same authors lint. J. Mech. Sci., 2009, 51： 246-255]. Both the solution forms and solving procedures in the previous work are substantially simplified. Some new results are also given, which are useful for validation purpose in future.展开更多
This paper presents a combined application of the finite element method （FEM） and the differential quadrature method （DQM） to vibration and buckling problems of rectangular plates. The proposed scheme combines the...This paper presents a combined application of the finite element method （FEM） and the differential quadrature method （DQM） to vibration and buckling problems of rectangular plates. The proposed scheme combines the geometry flexibility of the FEM and the high accuracy and efficiency of the DQM. The accuracy of the present method is demonstrated by comparing the obtained results with those available in the literature. It is shown that highly accurate results can be obtained by using a small number of finite elements and DQM sample points. The proposed method is suitable for the problems considered due to its simplicity and potential for further development.展开更多
The thermal behavior of a thick transversely isotropic FGM rectangular plate was investigated within the scope of three-dimensional elasticity. Noticing many FGMs may have temperature-dependent properties, the materia...The thermal behavior of a thick transversely isotropic FGM rectangular plate was investigated within the scope of three-dimensional elasticity. Noticing many FGMs may have temperature-dependent properties, the material constants were further considered as functions of temperature. A solution method based on state-space formulations with a laminate approximate model was proposed. For a thin plate, the method was clarified by comparison with the thin plate theory. The influences of material inhomogeneity and temperature-dependent characteristics were finally discussed through numerical examples.展开更多
The finite deformation and stress analyses for a rectangular plate with a center void and made of rubber with the Yeoh elastic strain energy function under uniaxial extension were studied in this paper. An approximati...The finite deformation and stress analyses for a rectangular plate with a center void and made of rubber with the Yeoh elastic strain energy function under uniaxial extension were studied in this paper. An approximation solution was obtained from the minimum potential energy principle. The numerical results for the growth of the cavitation and stresses along the edge of the cavitation were discussed. In addition, the stress concentration phenomenon was considered.展开更多
The natural frequencies, complex modes and critical speeds of an axially moving rectangular plate, which is partially immersed in a fluid and subjected to a pretension, are investigated. The effects of free surface wa...The natural frequencies, complex modes and critical speeds of an axially moving rectangular plate, which is partially immersed in a fluid and subjected to a pretension, are investigated. The effects of free surface waves, compressibility and viscidity of the fluid are neglected in the analysis. The subsection functions are used to describe the discontinuous characteristics of the system due to partial immersion. The classical thin plate theory is adopted to formulate the equations of motion of a vibrating plate. The velocity potential and Bernoulli＇s equation are used to describe the fluid pressure acting on the moving plate. The effect of fluid on the vibrations of the plate may be equivalent to the added mass on the plate. The effects of distance ratio, moving speed, immersed-depth ratio, boundary conditions, stiffness ratio and aspect ratio of the plate as well as the fluid-plate density ratios on the free vibrations of the moving plate-fluid system are investigated.展开更多
In this paper, the magnetic-elastic-plastic deformation behavior is studied for a ferromagnetic plate with simple supports. The perturbation formula of magnetic force is first derived based on the perturbation techniq...In this paper, the magnetic-elastic-plastic deformation behavior is studied for a ferromagnetic plate with simple supports. The perturbation formula of magnetic force is first derived based on the perturbation technique, and is then applied to the analysis of deformation characteristics with emphasis laid on the analyses of modes, symmetry of deformation and influences of incident angle of applied magnetic field on the plate deformation. The theoretical analyses offer explanations why the configuration offer- romagnetic rectangular plate with simple supports under an oblique magnetic field is in-wavy type along the x-direction, and why the largest deformation of the ferromagnetic plate occurs at the incident angle of 45°for the magnetic field. A numerical code based on the finite element method is developed to simulate quantitatively behaviors of the nonlinearly coupled multi-field problem. Some characteristic curves are plotted to illustrate the magneto--elastic-plastic deflections, and to reveal how the deflections can be influenced by the incident angle of applied magnetic field. The deformation characteristics obtained from the numerical simulations are found in good agreement with the theoretical analyses.展开更多
A method based on newly presented state space formulations is developed for analyzing the bending, vibration and stability of laminated transversely isotropic rectangular plates with simply supported edges. By introdu...A method based on newly presented state space formulations is developed for analyzing the bending, vibration and stability of laminated transversely isotropic rectangular plates with simply supported edges. By introducing two displacement functions and two stress functions, two independent state equations were constructed based on the three-dimensional elasticity equations for transverse isotropy. The original differential equations are thus decoupled with the order reduced that will facilitate obtaining solutions of various problems. For the simply supported rectangular plate, two relations between the state variables at the tap and bottom surfaces were established. In particular, for the free vibration ( stability) problem, it is found that there exist two independent classes: One corresponds to the pure in-plane vibration (stability) and the other to the general bending vibration (stability). Numerical examples are finally presented and the effects of same parameters are discussed.展开更多
Using the method of undetermined function, a set of 12 parameter rectangular plate element with double set parameter and geometry symmetry is constructed. Their consistency error are O(h\+2) , one order higher than...Using the method of undetermined function, a set of 12 parameter rectangular plate element with double set parameter and geometry symmetry is constructed. Their consistency error are O(h\+2) , one order higher than the usual 12 parameter rectangular plate elements.展开更多
With the idea of the phononic crystals, a thin rectangular plate with two-dimensional periodic structure is designed. Flexural wave band structures of such a plate with infinite structure are calculated with the plane...With the idea of the phononic crystals, a thin rectangular plate with two-dimensional periodic structure is designed. Flexural wave band structures of such a plate with infinite structure are calculated with the plane-wave expansion （PWE） method, and directional band gaps are found in the ΓX direction. The acceleration frequency response in the ΓX direction of such a plate with finite structure is simulated with the finite element method and verified with a vibration experiment. The frequency ranges of sharp drops in the calculated and measured acceleration frequency response curves are in basic agreement with those in the band structures. Thin plate is a widely used component in the engineering structures. The existence of band gaps in such periodic structures gives a new idea in vibration control of thin plates.展开更多
The bending problem of a thin rectangular plate with in-plane variable stiffness is studied. The basic equation is formulated for the two-opposite-edge simply supported rectangular plate under the distributed loads. T...The bending problem of a thin rectangular plate with in-plane variable stiffness is studied. The basic equation is formulated for the two-opposite-edge simply supported rectangular plate under the distributed loads. The formulation is based on the assumption that the flexural rigidity of the plate varies in the plane following a power form, and Poisson＇s ratio is constant. A fourth-order partial differential equation with variable coefficients is derived by assuming a Levy-type form for the transverse displacement. The governing equation can be transformed into a Whittaker equation, and an analytical solution is obtained for a thin rectangular plate subjected to the distributed loads. The validity of the present solution is shown by comparing the present results with those of the classical solution. The influence of in-plane variable stiffness on the deflection and bending moment is studied by numerical examples. The analytical solution presented here is useful in the design of rectangular plates with in-plane variable stiffness.展开更多
On the basis of Karman's theory of thin plates with large deflection, the Boltzmann law on linear viscoelastic materials and the mathematical model of dynamic analysis on viscoelastic thin plates, a set of nonline...On the basis of Karman's theory of thin plates with large deflection, the Boltzmann law on linear viscoelastic materials and the mathematical model of dynamic analysis on viscoelastic thin plates, a set of nonlinear integro partial differential equations is first presented by means of a structural function introduced in this paper. Then, by using the Galerkin technique in spatial field and a backward difference scheme in temporal field, the set of nonlinear integro partial differential equations reduces to a system of nonlinear algebraic equations. After solving the algebraic equations, the buckling behavior and multiple equilibrium states can be obtained.展开更多
Under internal blast loading,the response of a beam or plate is highly correlated with the phenomenon of saturated impulse,which governs the deflection of the structure.This paper aims to investigate the phenomenon of...Under internal blast loading,the response of a beam or plate is highly correlated with the phenomenon of saturated impulse,which governs the deflection of the structure.This paper aims to investigate the phenomenon of saturated impulse for fully clamped rectangular plates subjected to internal blast loading.Based on the rigid,perfectly plastic assumption,the relationship between saturation duration and saturation deflection is derived.Influences of the peak shock wave,the duration of shock wave and the peak quasi-static pressure loading on saturation duration and saturation deflection are discussed.It is found that there is a critical duration for the internal blast impulse to reach saturation,and beyond this duration,the deflection of plate will no longer increase as the loading increases further.The saturation deflection and saturation duration both exhibit regular variation patterns with the changes of the dimensionless peak shock wave,the duration of shock wave and the peak quasi-static pressure loading.展开更多
Based on Kirchhoff plate theory and the Rayleigh-Ritz method,the model for free vibration of rectangular plate with rectangular cutouts under arbitrary elastic boundary conditions is established by using the improved ...Based on Kirchhoff plate theory and the Rayleigh-Ritz method,the model for free vibration of rectangular plate with rectangular cutouts under arbitrary elastic boundary conditions is established by using the improved Fourier series in combination with the independent coordinate coupling method(ICCM).The effect of the cutout is taken into account by subtracting the energies of the cutouts from the total energies of the whole plate.The vibration displacement function of the hole domain is based on the coordinate system of the hole domain in this method.From the continuity condition of the vibration displacement function at the cutout,the transition matrix between the two coordinate systems is constructed,and the mass and stiffness matrices are completely obtained.As a result,the calculation is simplified and the computational efficiency of the solution is improved.In this paper,numerical examples and modal experiments are presented to validate the effectiveness of the modeling methods,and parameters related to influencing factors of the rectangular plate are analyzed to study the vibration characteristics.展开更多
The finite deformation and stress analyses for a transversely isotropic rectangular plate with voids and made of hyper_elastic material with the generalized neo_Hookean strain energy function under a uniaxial extensio...The finite deformation and stress analyses for a transversely isotropic rectangular plate with voids and made of hyper_elastic material with the generalized neo_Hookean strain energy function under a uniaxial extension are studied. The deformation functions of plates with voids that are symmetrically distributed in a certain manner are given and the functions are expressed by two parameters by solving the differential equations.The solution may be approximately obtained from the minimum potential energy principle. Thus, the analytic solutions of the deformation and stress of the plate are obtained. The growth of the voids and the distribution of stresses along the voids are analyzed and the influences of the degree of anisotropy, the size of the voids and the distance between the voids are discussed. The characteristics of the growth of the voids and the distribution of stresses of the plates with one void, three or five voids are obtained and compared.展开更多
Full-range analysis for the buckling and post buck ling at rectangular plates under in-plane compression has been made by perturbation technique which takes deflection as its perturbation parameter.In this paper the e...Full-range analysis for the buckling and post buck ling at rectangular plates under in-plane compression has been made by perturbation technique which takes deflection as its perturbation parameter.In this paper the effects of initial geometric imperfection on the postbuc kling behavior of plates have been discussed. It is seen that the effect of initial imperfection on the inelastic postbuckling oj plates is sensitive. By comparison, it is found that the theoretical results of this paper are in good agreement with experiments.展开更多
The nonlinear dynamic behaviors of viscoelastic rectangular plates including the damage effects under the action of a transverse periodic load were studied. Using the von Karman equations, Boltzmann superposition prin...The nonlinear dynamic behaviors of viscoelastic rectangular plates including the damage effects under the action of a transverse periodic load were studied. Using the von Karman equations, Boltzmann superposition principle and continuum damage mechanics, the nonlinear dynamic equations in terms of the mid_plane displacements for the viscoelastic thin plates with damage effect were derived. By adopting the finite difference method and Newmark method, these equations were solved. The results were compared with the available data. In the numerical calculations, the effects of the external loading parameters and geometric dimensions of the plate on the nonlinear dynamic responses of the plate were discussed. Research results show that the nonlinear dynamic response of the structure will change remarkably when the damage effect is considered.展开更多
The analyses of finite deformation and stress for a hyperelastic rectangular plate with some voids under an uniaxial extension were conducted. The governing differential equations were given from the incompressibility...The analyses of finite deformation and stress for a hyperelastic rectangular plate with some voids under an uniaxial extension were conducted. The governing differential equations were given from the incompressibility condition of the material. The solution was approximately obtained from the minimum potential energy principle. The growth of voids was discussed. One can see that an initial central circular-cylinder void becomes an elliptic-cylinder void, but an initial non-centeral circular-cylinder void becomes an elliptic-like cylinder void and the center of void has a shift. The stress distributions along the edges of voids were given and the phenomenon of stress concentration was observed. The influences of the distribution manner and size of voids, as well as the distance between them on the growth of voids were analyzed.展开更多
基金supported by the National Natural Science Foundation of China(No.11772090).
文摘This study investigates the nonlinear dynamic properties of rotating functionally graded sandwich rectangular plates in a thermal environment.The nonlinear vibration equations for a rotating metal-ceramic functionally graded sandwich rectangular plate in a thermal environment are derived using classical thin plate theory and Hamilton’s principle,considering geometric nonlinearity,temperature-dependent material properties,and power law distribution of components through the thickness.With cantilever boundary conditions,the flexural nonlinear differential equations of the rectangular sandwich plate are obtained via the Galerkin method.Since the natural vibration differential equations exhibit nonlinear characteristics,the multiscale method is employed to derive the expression for nonlinear natural frequency.An example analysis reveals how the natural frequency of a functionally graded sandwich rectangular plate varies with rotational speed and temperature.Results show that the nonlinear/linear frequency ratio increases with rotational angular velocity Ω and thickness-to-length ratio h/a,follows a cosine-like periodic pattern with the setting angle,and shows a sharp decrease followed by a rapid increase with increasing width-to-length ratio b/a.The derived analytical solutions for nonlinear frequency provide valuable insights for assessing the dynamic characteristics of functionally graded structures.
文摘The bending of rectangular plate is divided into the generalized statically determinate bending and the generalized statically indeterminate bending based on the analysis of the completeness of calculating condition at the corner point. The former can be solved directly by the equilibrium differential equation and the boundary conditions of four edges of the plate. The latter can be solved by using the superposition principle. Making use of the recommended method, the bending of the plate with all kinds of...
文摘In this paper the method of the reciprocal theorem (MRT) is extended to solve the steady state responses of rectangular plater under harmonic disturbing forces. A series of the closed solutions of rectangular plates with various boundary conditions are given and the tables and figures which have practical value are provided.MRT is a simple, convenient and general method for solving the steady stale responses of rectangular plates under various harmonic disturbing forces.The paper contains three parts: (I) rectangular plates with four damped edges and with three clamped edges; (II) rectangular plates with two adjacent clamped edges; (III) cantilever plates.We arc going to publish them one after another.
基金supported by the China Postdoctoral Science Foundation (No. 20100470179)
文摘All possible exact solutions are successfully obtained in terms of 10 sets of distinct eigensolutions for the free in-plane vibration of isotropic rectangular plates. The plates have simply supported condition at two opposite edges and any combination of classical boundary conditions at the other two edges. The exact solutions are validated through both mathematical proof and comparisons with the solutions of differential quadrature method. Some unusual phenomena are revealed in free in-plane vibrations of rectangular plates due to one of the eigenvalues being zero. This work constitutes an improved version of very recent corresponding work by the same authors lint. J. Mech. Sci., 2009, 51： 246-255]. Both the solution forms and solving procedures in the previous work are substantially simplified. Some new results are also given, which are useful for validation purpose in future.
文摘This paper presents a combined application of the finite element method （FEM） and the differential quadrature method （DQM） to vibration and buckling problems of rectangular plates. The proposed scheme combines the geometry flexibility of the FEM and the high accuracy and efficiency of the DQM. The accuracy of the present method is demonstrated by comparing the obtained results with those available in the literature. It is shown that highly accurate results can be obtained by using a small number of finite elements and DQM sample points. The proposed method is suitable for the problems considered due to its simplicity and potential for further development.
文摘The thermal behavior of a thick transversely isotropic FGM rectangular plate was investigated within the scope of three-dimensional elasticity. Noticing many FGMs may have temperature-dependent properties, the material constants were further considered as functions of temperature. A solution method based on state-space formulations with a laminate approximate model was proposed. For a thin plate, the method was clarified by comparison with the thin plate theory. The influences of material inhomogeneity and temperature-dependent characteristics were finally discussed through numerical examples.
文摘The finite deformation and stress analyses for a rectangular plate with a center void and made of rubber with the Yeoh elastic strain energy function under uniaxial extension were studied in this paper. An approximation solution was obtained from the minimum potential energy principle. The numerical results for the growth of the cavitation and stresses along the edge of the cavitation were discussed. In addition, the stress concentration phenomenon was considered.
基金Project supported by the National Natural Science Foundation of China(Nos.11302046 and 11172063)
文摘The natural frequencies, complex modes and critical speeds of an axially moving rectangular plate, which is partially immersed in a fluid and subjected to a pretension, are investigated. The effects of free surface waves, compressibility and viscidity of the fluid are neglected in the analysis. The subsection functions are used to describe the discontinuous characteristics of the system due to partial immersion. The classical thin plate theory is adopted to formulate the equations of motion of a vibrating plate. The velocity potential and Bernoulli＇s equation are used to describe the fluid pressure acting on the moving plate. The effect of fluid on the vibrations of the plate may be equivalent to the added mass on the plate. The effects of distance ratio, moving speed, immersed-depth ratio, boundary conditions, stiffness ratio and aspect ratio of the plate as well as the fluid-plate density ratios on the free vibrations of the moving plate-fluid system are investigated.
基金the National Natural Science Foundation of China (10672070, 10302009)the National Basic Research Program of China (2007CB607560)+1 种基金the Program for New Century Talented (NCET-06-0896) the Natural Science Fund of Gansu Province
文摘In this paper, the magnetic-elastic-plastic deformation behavior is studied for a ferromagnetic plate with simple supports. The perturbation formula of magnetic force is first derived based on the perturbation technique, and is then applied to the analysis of deformation characteristics with emphasis laid on the analyses of modes, symmetry of deformation and influences of incident angle of applied magnetic field on the plate deformation. The theoretical analyses offer explanations why the configuration offer- romagnetic rectangular plate with simple supports under an oblique magnetic field is in-wavy type along the x-direction, and why the largest deformation of the ferromagnetic plate occurs at the incident angle of 45°for the magnetic field. A numerical code based on the finite element method is developed to simulate quantitatively behaviors of the nonlinearly coupled multi-field problem. Some characteristic curves are plotted to illustrate the magneto--elastic-plastic deflections, and to reveal how the deflections can be influenced by the incident angle of applied magnetic field. The deformation characteristics obtained from the numerical simulations are found in good agreement with the theoretical analyses.
文摘A method based on newly presented state space formulations is developed for analyzing the bending, vibration and stability of laminated transversely isotropic rectangular plates with simply supported edges. By introducing two displacement functions and two stress functions, two independent state equations were constructed based on the three-dimensional elasticity equations for transverse isotropy. The original differential equations are thus decoupled with the order reduced that will facilitate obtaining solutions of various problems. For the simply supported rectangular plate, two relations between the state variables at the tap and bottom surfaces were established. In particular, for the free vibration ( stability) problem, it is found that there exist two independent classes: One corresponds to the pure in-plane vibration (stability) and the other to the general bending vibration (stability). Numerical examples are finally presented and the effects of same parameters are discussed.
文摘Using the method of undetermined function, a set of 12 parameter rectangular plate element with double set parameter and geometry symmetry is constructed. Their consistency error are O(h\+2) , one order higher than the usual 12 parameter rectangular plate elements.
基金This project is supported by National Basic Research Program of China (973Program, No.51307).
文摘With the idea of the phononic crystals, a thin rectangular plate with two-dimensional periodic structure is designed. Flexural wave band structures of such a plate with infinite structure are calculated with the plane-wave expansion （PWE） method, and directional band gaps are found in the ΓX direction. The acceleration frequency response in the ΓX direction of such a plate with finite structure is simulated with the finite element method and verified with a vibration experiment. The frequency ranges of sharp drops in the calculated and measured acceleration frequency response curves are in basic agreement with those in the band structures. Thin plate is a widely used component in the engineering structures. The existence of band gaps in such periodic structures gives a new idea in vibration control of thin plates.
基金Project supported by the National Natural Science Foundation of China (No. 11072177)
文摘The bending problem of a thin rectangular plate with in-plane variable stiffness is studied. The basic equation is formulated for the two-opposite-edge simply supported rectangular plate under the distributed loads. The formulation is based on the assumption that the flexural rigidity of the plate varies in the plane following a power form, and Poisson＇s ratio is constant. A fourth-order partial differential equation with variable coefficients is derived by assuming a Levy-type form for the transverse displacement. The governing equation can be transformed into a Whittaker equation, and an analytical solution is obtained for a thin rectangular plate subjected to the distributed loads. The validity of the present solution is shown by comparing the present results with those of the classical solution. The influence of in-plane variable stiffness on the deflection and bending moment is studied by numerical examples. The analytical solution presented here is useful in the design of rectangular plates with in-plane variable stiffness.
文摘On the basis of Karman's theory of thin plates with large deflection, the Boltzmann law on linear viscoelastic materials and the mathematical model of dynamic analysis on viscoelastic thin plates, a set of nonlinear integro partial differential equations is first presented by means of a structural function introduced in this paper. Then, by using the Galerkin technique in spatial field and a backward difference scheme in temporal field, the set of nonlinear integro partial differential equations reduces to a system of nonlinear algebraic equations. After solving the algebraic equations, the buckling behavior and multiple equilibrium states can be obtained.
基金The authors would like to thank the support from the National Natural Science Foundation of China under Grant No.11802030.
文摘Under internal blast loading,the response of a beam or plate is highly correlated with the phenomenon of saturated impulse,which governs the deflection of the structure.This paper aims to investigate the phenomenon of saturated impulse for fully clamped rectangular plates subjected to internal blast loading.Based on the rigid,perfectly plastic assumption,the relationship between saturation duration and saturation deflection is derived.Influences of the peak shock wave,the duration of shock wave and the peak quasi-static pressure loading on saturation duration and saturation deflection are discussed.It is found that there is a critical duration for the internal blast impulse to reach saturation,and beyond this duration,the deflection of plate will no longer increase as the loading increases further.The saturation deflection and saturation duration both exhibit regular variation patterns with the changes of the dimensionless peak shock wave,the duration of shock wave and the peak quasi-static pressure loading.
基金support of this work by the National Natural Science Foundation of China(No.51405096)the Fundamental Research Funds for the Central Universities(HEUCF210710).
文摘Based on Kirchhoff plate theory and the Rayleigh-Ritz method,the model for free vibration of rectangular plate with rectangular cutouts under arbitrary elastic boundary conditions is established by using the improved Fourier series in combination with the independent coordinate coupling method(ICCM).The effect of the cutout is taken into account by subtracting the energies of the cutouts from the total energies of the whole plate.The vibration displacement function of the hole domain is based on the coordinate system of the hole domain in this method.From the continuity condition of the vibration displacement function at the cutout,the transition matrix between the two coordinate systems is constructed,and the mass and stiffness matrices are completely obtained.As a result,the calculation is simplified and the computational efficiency of the solution is improved.In this paper,numerical examples and modal experiments are presented to validate the effectiveness of the modeling methods,and parameters related to influencing factors of the rectangular plate are analyzed to study the vibration characteristics.
文摘The finite deformation and stress analyses for a transversely isotropic rectangular plate with voids and made of hyper_elastic material with the generalized neo_Hookean strain energy function under a uniaxial extension are studied. The deformation functions of plates with voids that are symmetrically distributed in a certain manner are given and the functions are expressed by two parameters by solving the differential equations.The solution may be approximately obtained from the minimum potential energy principle. Thus, the analytic solutions of the deformation and stress of the plate are obtained. The growth of the voids and the distribution of stresses along the voids are analyzed and the influences of the degree of anisotropy, the size of the voids and the distance between the voids are discussed. The characteristics of the growth of the voids and the distribution of stresses of the plates with one void, three or five voids are obtained and compared.
文摘Full-range analysis for the buckling and post buck ling at rectangular plates under in-plane compression has been made by perturbation technique which takes deflection as its perturbation parameter.In this paper the effects of initial geometric imperfection on the postbuc kling behavior of plates have been discussed. It is seen that the effect of initial imperfection on the inelastic postbuckling oj plates is sensitive. By comparison, it is found that the theoretical results of this paper are in good agreement with experiments.
基金ProjectsupportedbytheNationalNaturalScienceFoundationofChina (No .1 0 2 72 0 2 4)
文摘The nonlinear dynamic behaviors of viscoelastic rectangular plates including the damage effects under the action of a transverse periodic load were studied. Using the von Karman equations, Boltzmann superposition principle and continuum damage mechanics, the nonlinear dynamic equations in terms of the mid_plane displacements for the viscoelastic thin plates with damage effect were derived. By adopting the finite difference method and Newmark method, these equations were solved. The results were compared with the available data. In the numerical calculations, the effects of the external loading parameters and geometric dimensions of the plate on the nonlinear dynamic responses of the plate were discussed. Research results show that the nonlinear dynamic response of the structure will change remarkably when the damage effect is considered.
文摘The analyses of finite deformation and stress for a hyperelastic rectangular plate with some voids under an uniaxial extension were conducted. The governing differential equations were given from the incompressibility condition of the material. The solution was approximately obtained from the minimum potential energy principle. The growth of voids was discussed. One can see that an initial central circular-cylinder void becomes an elliptic-cylinder void, but an initial non-centeral circular-cylinder void becomes an elliptic-like cylinder void and the center of void has a shift. The stress distributions along the edges of voids were given and the phenomenon of stress concentration was observed. The influences of the distribution manner and size of voids, as well as the distance between them on the growth of voids were analyzed.
