There are several design equations available for calculating the torsional compliance and the maximum torsion stress of a rectangular cross-section beam, but most depend on the relative magnitude of the two dimensions...There are several design equations available for calculating the torsional compliance and the maximum torsion stress of a rectangular cross-section beam, but most depend on the relative magnitude of the two dimensions of the crosssection(i.e., the thickness and the width). After reviewing the available equations, two thickness-to-width ratio Independent equations that are symmetric with respect to the two dimensions are obtained for evaluating the maximum torsion stress of rectangular cross-section beams. Based on the resulting equations, outside lamina emergent torsional joints are analyzed and some useful design Insights are obtained. These equations, together with the previous work on symmetric equations for calculating torsional compliance, provide a convenient and effective way for designing and optimizing torsional beams in compliant mechanisms.展开更多
A novel optimal design of sub-wavelength metal rectangular gratings for the polarizing beam splitter （PBS） is proposed. The method is based on effective medium theory and the method of designing single layer antiref...A novel optimal design of sub-wavelength metal rectangular gratings for the polarizing beam splitter （PBS） is proposed. The method is based on effective medium theory and the method of designing single layer antireflection coating. The polarization performance of PBS is discussed by rigorous couple-wave analysis （RCWA） method at a wavelength of 1550 nm. The result shows that sub-wavelength metal rectangular grating is characterized by a high reflectivity, like metal films for TE polarization, and high transmissivity, like dielectric films for TM polarization. The optimal design accords well with the results simulated by RCWA method.展开更多
The Fourier series method was extended for the exact analysis of wave propagation in an infinite rectangular beam.Initially,by solving the three-dimensional elastodynamic equations a general analytic solution was deri...The Fourier series method was extended for the exact analysis of wave propagation in an infinite rectangular beam.Initially,by solving the three-dimensional elastodynamic equations a general analytic solution was derived for wave motion within the beam.And then for the beam with stress-free boundaries,the propagation characteristics of elastic waves were presented.This accurate wave propagation model lays a solid foundation of simultaneous control of coupled waves in the beam.展开更多
A simple nonlinear model is proposed in this paper to study the bending wave in a rectangular piezoelectric laminated beam of infinite length.Based on the constitutive relations for transversely isotropic piezoelectri...A simple nonlinear model is proposed in this paper to study the bending wave in a rectangular piezoelectric laminated beam of infinite length.Based on the constitutive relations for transversely isotropic piezoelectric materials and isotropic elastic materials,combined with some electric conditions,we derive the bending wave equation in a long rectangular piezoelectric laminated beam by using energy method.The nonlinearity considered is geometrically associated with the nonlinear normal strain in the longitudinal beam direction.The shock-wave solution,solitary-wave solution and other exact solutions of the bending wave equation are obtained by the extended F-expansion method.And by using the reductive perturbation method we derive the nonlinear Schrodinger(NLS)equation,further more,the bright and dark solitons are obtained.For those soliton solutions,and some parameters derived by the process of solving soliton solutions,some conclusions are drawn by numerical analysis with some fixed conditions.展开更多
We explore the impact of pumping beams with different transverse intensity profiles on the performance of the spinexchange relaxation-free(SERF) atomic magnetometers(AMs). We conduct experiments comparing the traditio...We explore the impact of pumping beams with different transverse intensity profiles on the performance of the spinexchange relaxation-free(SERF) atomic magnetometers(AMs). We conduct experiments comparing the traditional Gaussian optically-pumped AM with that utilizing the flat-top optically-pumped(FTOP) method. Our findings reveal that the FTOP-based approach outperforms the conventional method, exhibiting a larger response, a narrower magnetic resonance linewidth, and a superior low-frequency noise performance. Specifically, the use of FTOP method leads to a 16% enhancement in average sensitivity within 1 Hz–30 Hz frequency range. Our research emphasizes the significance of achieving transverse polarization uniformity in AMs, providing insights for future optimization efforts and sensitivity improvements in miniaturized magnetometers.展开更多
A simple rectangular microstrip antenna on low dielectric constant substrate such as air for improved radiation beam performance is theoretically investigated. The conventional patch antenna fabricated on common subst...A simple rectangular microstrip antenna on low dielectric constant substrate such as air for improved radiation beam performance is theoretically investigated. The conventional patch antenna fabricated on common substrates always produces quite broader E plane pattern compared to its H plane. In the present investigation, the same microstrip antenna is designed on air substrate with a view to develop an efficient feed for parabolic reflector antenna, which shows an excellent radiation pattern with symmetrical 3 dB beam widths at its both E and H plane. The present antenna compared to conventional structure to show its excellence in the beam performance is presented. The complete quantitative analysis to explore such radiation beam characteristics for both the structures (conventional and the present one) is also presented in this paper. An easy and handful relationship between the length of patch antenna and its fringing length for different types of substrate is established in the background of 3 dB beam widths. The proposed idea has been verified through a commercial software package for a patch operating in X band and a concrete physical insight into the phenomenon is developed.展开更多
The electron optical column for the variable rectangular-shaped beam lithographysystem DJ-2 is described,with emphasis on the analysis of the optical configuration and theshaping deflection compensation.In this column...The electron optical column for the variable rectangular-shaped beam lithographysystem DJ-2 is described,with emphasis on the analysis of the optical configuration and theshaping deflection compensation.In this column the variable spot shaping is performed with aminimum number of lenses by a more reasonable optical scheme.A high-sensitivity electrostaticshaping deflector with sequential parallel-plates is implemented for high-speed spot shaping.With a precise linear and rotational approach,the spot current density,the edge resolution aswell as the position of spot origin remain unchanged when the spot size varies.Experiments showthat the spot current density of over 0.4 A/cm^2 is obtained with a tungsten hairpin cathode,andthe edge resolution is better than 0.2μm within a 2×2 mm^2 field size.展开更多
A three-dimensional model of a dielectric-loaded rectangular Cerenkov maser with a sheet electron beam for the beam-wave interaction is proposed.Based on this model,the hybrid-mode dispersion equation is derived with ...A three-dimensional model of a dielectric-loaded rectangular Cerenkov maser with a sheet electron beam for the beam-wave interaction is proposed.Based on this model,the hybrid-mode dispersion equation is derived with the Borgnis potential function by using the field-matching method.Its approximate solution is obtained under the assumption of a dilute electron beam.By using the Ansoft high frequency structural simulator（HFSS） code,the electromagnetic field distribution in the interaction structure is given.Through numerical calculations,the effects of beam thickness,beam and dielectric-layer gap distance,beam voltage,and current density on the resonant growth rate are analysed in detail.展开更多
Hydroformed parts are widely used in industrial automotive parts because of their higher stiffness and fatigue strength and reduced weight relative to their corresponding cast and welded parts.This paper reports a hyd...Hydroformed parts are widely used in industrial automotive parts because of their higher stiffness and fatigue strength and reduced weight relative to their corresponding cast and welded parts.This paper reports a hydraulicforming experimental platform for rectangular tube fittings that was constructed to conduct an experiment on the hydraulic forming of rectangular tube fittings.A finite element model was established on the basis of the fluid–solid coupling method and simulation analysis.The correctness of the simulation analysis and the feasibility of the fluid–solid coupling method for hydraulic forming simulation analysis were verified by comparing the experimental results with the simulation results.On the basis of the simulation analysis of the hydraulic process of the torsion beam using the fluid–solid coupling method,a sliding mold suitable for the hydroforming of torsion beams was designed for its structural characteristics.The effects of fluid characteristics,shaping pressure,axial feed rate,and friction coefficient on the wall thicknesses of torsions beams during formation were investigated.Fluid movement speed was related to tube deformation.Shaping pressure had a significant effect on rounded corners and straight edges.The axial feed speed was increased,and the uneven distribution of wall thicknesses was effectively improved.Although the friction coefficient had a nonsignificant effect on the wall thickness of the ladder-shaped region,it had a significant influence on a large deformation of wall thickness in the V-shaped area.In this paper,a method of fluid-solid coupling simulation analysis and sliding die is proposed to study the high pressure forming law in torsion beam.展开更多
The ultimate strength of reinforced concrete(RC) rectangular members subjected to combined bending,shear and torsion is obtained from the limit analysis proposed in the present paper. Based on a warped failure surface...The ultimate strength of reinforced concrete(RC) rectangular members subjected to combined bending,shear and torsion is obtained from the limit analysis proposed in the present paper. Based on a warped failure surface determined by external loads, and a reasonable assumed stress distribution balancing external loads but not violating the yield condition, the bending-shear-torsion interaction can be derived from equilibrium conditions.According to the definition of lower-bound theorem in limit analysis, the calculated ultimate loads will be carried safely by the structure. The present method is a simple approach to obtain carrying capacities for RC elements under complex external loads. After comparing with the test results, a good agreement has been observed. The present method can be extended to explain the failure mechanism of RC members subjected to axial loads, and it is possible to develop a simple unified theory of RC members for engineering.展开更多
Based on the Collins diffraction formula and by means of the expansion of a hard aperture function into a finite sum of complex Gaussian functions, two analytical approaches of the Finite Olver beams (FOBs) passing th...Based on the Collins diffraction formula and by means of the expansion of a hard aperture function into a finite sum of complex Gaussian functions, two analytical approaches of the Finite Olver beams (FOBs) passing through a paraxial ABCD optical system with a circular annular aperture or a rectangular one are developed in this paper. The propagation properties of the FOBs through an unapertured ABCD optical system or through this last with a circular (or rectangular) aperture or a circular (or rectangular) black screen are deduced, from the main results, as particular cases. Also, the characteristics of Finite ordinary Airy beam passing through the all considered optical systems are derived here that correspond to zeroth-order of the FOBs. According to the predicted formulas, computer simulation examples are given to deepen the understanding of the characteristics of the FOBs passing through some optical systems of annular aperture basis.展开更多
This paper deals with non-linear vibration of rectangular reticulated shallow shells by applying non-linear elastic theory of such structures established by the author .Us-ing the assumed (generalized)Fourier series s...This paper deals with non-linear vibration of rectangular reticulated shallow shells by applying non-linear elastic theory of such structures established by the author .Us-ing the assumed (generalized)Fourier series solutions for transverse deflection (latticejoint transverse displacement )and force function,weighted means of the trial functions lead to the relations among the coefficients related to the solutions and vibration equ-ation which determines the unknown time function,and then the amplitude -frequeney relations for free vibration and forced vibration due to harmonic force are derived withthe aid of the regular perturbation method and Galerkin procedure,respectively.Nu-merical examples are given as well.展开更多
In this paper, we present a design where a bunched relativistic electron beam traversing inside the rectangular dielectric-loaded （DL） waveguide is used as a high power microwave generation device. Two kinds of meth...In this paper, we present a design where a bunched relativistic electron beam traversing inside the rectangular dielectric-loaded （DL） waveguide is used as a high power microwave generation device. Two kinds of methods of calculating the electromagnetic （EM） field excited by a bunched beam are introduced, and in the second method the calculation of EM pulse length is discussed in detail. The desired operating mode is the LSM11 due to its strong interaction with the electron beam. For the designed 7.8 GHz operating frequency, with a 100 nC/bunch drive train of electron bunches separated by 0.769 ns, we find that high gradient （〉 30 MV/m） and high power （〉 160 MW） can be generated. An output coupler is also designed which is able to extract the generated power to standard waveguides with a 94% coupling efficiency.展开更多
In the present work,rails and panels in a rectangular electromagnetic rail launcher were simulated as finite-length bi-layer elastic foundation beams. Mechanical equilibrium equations were established for these bi-lay...In the present work,rails and panels in a rectangular electromagnetic rail launcher were simulated as finite-length bi-layer elastic foundation beams. Mechanical equilibrium equations were established for these bi-layer beams under the electromagnetic and contact forces between armatures and rails. With the application of Generalized Krylov function,analytical expressions of rails( upper beam) and panels( lower beam) 'deformation and stress were generated. The analytical results agree well with ANSYS calculations even in the presence of electromagnetic and armature's forces,a strong indication of the reliability of the analytical approach. The current work lays the foundation for mechanical analyses of rectangular electromagnetic rail launchers,and offers help in future designs and calculations in marine,aerospace,and civil engineering.展开更多
Micro fabricated and multilayered perforated cantilever beam immunosensor was modeled using CoventorWare for the estimation of bacterial antigens of Bacillus Anthrax, Pseudomonas aeruginosa, Coryne Bacterium Diptheria...Micro fabricated and multilayered perforated cantilever beam immunosensor was modeled using CoventorWare for the estimation of bacterial antigens of Bacillus Anthrax, Pseudomonas aeruginosa, Coryne Bacterium Diptheria and Treponema pallidum. A rectangular cantilever beam with perforations was simulated with dimensions as length-200 μm, width-10 μm and thickness-0.5 μm. Each perforation is rectangular with length-10 μm, width-5 μm and thickness-0.5 μm. The theoretical and FEM simulations were carried out with five immunoglobulin antibodies, IgA, IgD, IgE, IgG and IgM for the estimation of bacterial antigens. The effect of perforation in cantilever beam and molecular size of antibody and antigen on the performance of the sensor has been studied. The cantilever beam without perforation showed a deflection of 1.8 e + 02 μm whereas the cantilever beam with perforation showed an increase deflection of 1.9 e + 02 μm. With IgG, the difference between analytical and simulation values is positive and low especially with low molecular weight antigens Pseudomonas aeruginosa and Treponema pallidum. The low molecular weight IgG influences the antigen-antibody interaction more fvourably. The simulated perforated rectangular cantilever beam with IgG antibody is a more promising model for the fabrication of a sensor for the estimation of highly motile Pseudomonas aeruginosa and Treponema pallidum.展开更多
Based on the vectorial Ftayleigh-Sommerfeld integral formula and the complex Gaussian expansion of the hardedge aperture function, an analytical propagation expression for a nonparaxial vectorial off-axis Lorentz beam...Based on the vectorial Ftayleigh-Sommerfeld integral formula and the complex Gaussian expansion of the hardedge aperture function, an analytical propagation expression for a nonparaxial vectorial off-axis Lorentz beam passing through a rectangular aperture is derived. The unapertured case, the far field expression and the scalar paraxial result are also presented as special cases of the general formulae, respectively. Some numerical examples are also given to show the propagation characteristics of a nonparaxial vectorial off-axis Lorentz beam through a rectangular aperture. It is indicated that the f parameter, the off-axis displacement and the truncation parameter all play an important role in determining nonparaxial propagation behaviour.展开更多
基金Supported by National Science Foundation Research of the United States (Grant No.1663345)National Natural Science Foundation of China(Grant No.51675396)Fundamental Research Fund for the Central Universities(Grant No.12K5051204021)
文摘There are several design equations available for calculating the torsional compliance and the maximum torsion stress of a rectangular cross-section beam, but most depend on the relative magnitude of the two dimensions of the crosssection(i.e., the thickness and the width). After reviewing the available equations, two thickness-to-width ratio Independent equations that are symmetric with respect to the two dimensions are obtained for evaluating the maximum torsion stress of rectangular cross-section beams. Based on the resulting equations, outside lamina emergent torsional joints are analyzed and some useful design Insights are obtained. These equations, together with the previous work on symmetric equations for calculating torsional compliance, provide a convenient and effective way for designing and optimizing torsional beams in compliant mechanisms.
基金Project supported by Science Foundation of the Chongqing Committee of Education,China (Grant No KJ071205)
文摘A novel optimal design of sub-wavelength metal rectangular gratings for the polarizing beam splitter （PBS） is proposed. The method is based on effective medium theory and the method of designing single layer antireflection coating. The polarization performance of PBS is discussed by rigorous couple-wave analysis （RCWA） method at a wavelength of 1550 nm. The result shows that sub-wavelength metal rectangular grating is characterized by a high reflectivity, like metal films for TE polarization, and high transmissivity, like dielectric films for TM polarization. The optimal design accords well with the results simulated by RCWA method.
文摘The Fourier series method was extended for the exact analysis of wave propagation in an infinite rectangular beam.Initially,by solving the three-dimensional elastodynamic equations a general analytic solution was derived for wave motion within the beam.And then for the beam with stress-free boundaries,the propagation characteristics of elastic waves were presented.This accurate wave propagation model lays a solid foundation of simultaneous control of coupled waves in the beam.
文摘A simple nonlinear model is proposed in this paper to study the bending wave in a rectangular piezoelectric laminated beam of infinite length.Based on the constitutive relations for transversely isotropic piezoelectric materials and isotropic elastic materials,combined with some electric conditions,we derive the bending wave equation in a long rectangular piezoelectric laminated beam by using energy method.The nonlinearity considered is geometrically associated with the nonlinear normal strain in the longitudinal beam direction.The shock-wave solution,solitary-wave solution and other exact solutions of the bending wave equation are obtained by the extended F-expansion method.And by using the reductive perturbation method we derive the nonlinear Schrodinger(NLS)equation,further more,the bright and dark solitons are obtained.For those soliton solutions,and some parameters derived by the process of solving soliton solutions,some conclusions are drawn by numerical analysis with some fixed conditions.
基金Project supported by the National Natural Science Foundation of China (Grant No. 62303029)the China Postdoctoral Science Foundation (Grant No. 2022M720364)the Innovation Program for Quantum Science and Technology (Grant Nos. 2021ZD0300500 and 2021ZD0300503)。
文摘We explore the impact of pumping beams with different transverse intensity profiles on the performance of the spinexchange relaxation-free(SERF) atomic magnetometers(AMs). We conduct experiments comparing the traditional Gaussian optically-pumped AM with that utilizing the flat-top optically-pumped(FTOP) method. Our findings reveal that the FTOP-based approach outperforms the conventional method, exhibiting a larger response, a narrower magnetic resonance linewidth, and a superior low-frequency noise performance. Specifically, the use of FTOP method leads to a 16% enhancement in average sensitivity within 1 Hz–30 Hz frequency range. Our research emphasizes the significance of achieving transverse polarization uniformity in AMs, providing insights for future optimization efforts and sensitivity improvements in miniaturized magnetometers.
文摘A simple rectangular microstrip antenna on low dielectric constant substrate such as air for improved radiation beam performance is theoretically investigated. The conventional patch antenna fabricated on common substrates always produces quite broader E plane pattern compared to its H plane. In the present investigation, the same microstrip antenna is designed on air substrate with a view to develop an efficient feed for parabolic reflector antenna, which shows an excellent radiation pattern with symmetrical 3 dB beam widths at its both E and H plane. The present antenna compared to conventional structure to show its excellence in the beam performance is presented. The complete quantitative analysis to explore such radiation beam characteristics for both the structures (conventional and the present one) is also presented in this paper. An easy and handful relationship between the length of patch antenna and its fringing length for different types of substrate is established in the background of 3 dB beam widths. The proposed idea has been verified through a commercial software package for a patch operating in X band and a concrete physical insight into the phenomenon is developed.
文摘The electron optical column for the variable rectangular-shaped beam lithographysystem DJ-2 is described,with emphasis on the analysis of the optical configuration and theshaping deflection compensation.In this column the variable spot shaping is performed with aminimum number of lenses by a more reasonable optical scheme.A high-sensitivity electrostaticshaping deflector with sequential parallel-plates is implemented for high-speed spot shaping.With a precise linear and rotational approach,the spot current density,the edge resolution aswell as the position of spot origin remain unchanged when the spot size varies.Experiments showthat the spot current density of over 0.4 A/cm^2 is obtained with a tungsten hairpin cathode,andthe edge resolution is better than 0.2μm within a 2×2 mm^2 field size.
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 60801031 and 10905032)the Knowledge Innovation Project of the Chinese Academy of Sciences (Grant No. YYYJ-1123-5)
文摘A three-dimensional model of a dielectric-loaded rectangular Cerenkov maser with a sheet electron beam for the beam-wave interaction is proposed.Based on this model,the hybrid-mode dispersion equation is derived with the Borgnis potential function by using the field-matching method.Its approximate solution is obtained under the assumption of a dilute electron beam.By using the Ansoft high frequency structural simulator（HFSS） code,the electromagnetic field distribution in the interaction structure is given.Through numerical calculations,the effects of beam thickness,beam and dielectric-layer gap distance,beam voltage,and current density on the resonant growth rate are analysed in detail.
基金Natural Science Foundation of China(Grant No.81960332)Guangxi Provincial Innovation driven Development Project(Grant No.GKAA17204062)+1 种基金Guangxi Provincial Natural Science Foundation(Grant No.2016GXNSFAA380211)Liuzhou Municipal Scientific Research and Technology Development Plan(Grant No.2016C050203)。
文摘Hydroformed parts are widely used in industrial automotive parts because of their higher stiffness and fatigue strength and reduced weight relative to their corresponding cast and welded parts.This paper reports a hydraulicforming experimental platform for rectangular tube fittings that was constructed to conduct an experiment on the hydraulic forming of rectangular tube fittings.A finite element model was established on the basis of the fluid–solid coupling method and simulation analysis.The correctness of the simulation analysis and the feasibility of the fluid–solid coupling method for hydraulic forming simulation analysis were verified by comparing the experimental results with the simulation results.On the basis of the simulation analysis of the hydraulic process of the torsion beam using the fluid–solid coupling method,a sliding mold suitable for the hydroforming of torsion beams was designed for its structural characteristics.The effects of fluid characteristics,shaping pressure,axial feed rate,and friction coefficient on the wall thicknesses of torsions beams during formation were investigated.Fluid movement speed was related to tube deformation.Shaping pressure had a significant effect on rounded corners and straight edges.The axial feed speed was increased,and the uneven distribution of wall thicknesses was effectively improved.Although the friction coefficient had a nonsignificant effect on the wall thickness of the ladder-shaped region,it had a significant influence on a large deformation of wall thickness in the V-shaped area.In this paper,a method of fluid-solid coupling simulation analysis and sliding die is proposed to study the high pressure forming law in torsion beam.
基金the National Natural Science Foundation of China(No.51178265)
文摘The ultimate strength of reinforced concrete(RC) rectangular members subjected to combined bending,shear and torsion is obtained from the limit analysis proposed in the present paper. Based on a warped failure surface determined by external loads, and a reasonable assumed stress distribution balancing external loads but not violating the yield condition, the bending-shear-torsion interaction can be derived from equilibrium conditions.According to the definition of lower-bound theorem in limit analysis, the calculated ultimate loads will be carried safely by the structure. The present method is a simple approach to obtain carrying capacities for RC elements under complex external loads. After comparing with the test results, a good agreement has been observed. The present method can be extended to explain the failure mechanism of RC members subjected to axial loads, and it is possible to develop a simple unified theory of RC members for engineering.
文摘Based on the Collins diffraction formula and by means of the expansion of a hard aperture function into a finite sum of complex Gaussian functions, two analytical approaches of the Finite Olver beams (FOBs) passing through a paraxial ABCD optical system with a circular annular aperture or a rectangular one are developed in this paper. The propagation properties of the FOBs through an unapertured ABCD optical system or through this last with a circular (or rectangular) aperture or a circular (or rectangular) black screen are deduced, from the main results, as particular cases. Also, the characteristics of Finite ordinary Airy beam passing through the all considered optical systems are derived here that correspond to zeroth-order of the FOBs. According to the predicted formulas, computer simulation examples are given to deepen the understanding of the characteristics of the FOBs passing through some optical systems of annular aperture basis.
文摘This paper deals with non-linear vibration of rectangular reticulated shallow shells by applying non-linear elastic theory of such structures established by the author .Us-ing the assumed (generalized)Fourier series solutions for transverse deflection (latticejoint transverse displacement )and force function,weighted means of the trial functions lead to the relations among the coefficients related to the solutions and vibration equ-ation which determines the unknown time function,and then the amplitude -frequeney relations for free vibration and forced vibration due to harmonic force are derived withthe aid of the regular perturbation method and Galerkin procedure,respectively.Nu-merical examples are given as well.
基金Project supported by the State Key Program of National Natural Science Foundation of China (Grant No 60532010)
文摘In this paper, we present a design where a bunched relativistic electron beam traversing inside the rectangular dielectric-loaded （DL） waveguide is used as a high power microwave generation device. Two kinds of methods of calculating the electromagnetic （EM） field excited by a bunched beam are introduced, and in the second method the calculation of EM pulse length is discussed in detail. The desired operating mode is the LSM11 due to its strong interaction with the electron beam. For the designed 7.8 GHz operating frequency, with a 100 nC/bunch drive train of electron bunches separated by 0.769 ns, we find that high gradient （〉 30 MV/m） and high power （〉 160 MW） can be generated. An output coupler is also designed which is able to extract the generated power to standard waveguides with a 94% coupling efficiency.
基金Sponsored by the National Natural Science Foundation of China(Grant No.50875230)the Doctor Foundation of Yanshan University,Qinhuangdao,Hebei China
文摘In the present work,rails and panels in a rectangular electromagnetic rail launcher were simulated as finite-length bi-layer elastic foundation beams. Mechanical equilibrium equations were established for these bi-layer beams under the electromagnetic and contact forces between armatures and rails. With the application of Generalized Krylov function,analytical expressions of rails( upper beam) and panels( lower beam) 'deformation and stress were generated. The analytical results agree well with ANSYS calculations even in the presence of electromagnetic and armature's forces,a strong indication of the reliability of the analytical approach. The current work lays the foundation for mechanical analyses of rectangular electromagnetic rail launchers,and offers help in future designs and calculations in marine,aerospace,and civil engineering.
文摘Micro fabricated and multilayered perforated cantilever beam immunosensor was modeled using CoventorWare for the estimation of bacterial antigens of Bacillus Anthrax, Pseudomonas aeruginosa, Coryne Bacterium Diptheria and Treponema pallidum. A rectangular cantilever beam with perforations was simulated with dimensions as length-200 μm, width-10 μm and thickness-0.5 μm. Each perforation is rectangular with length-10 μm, width-5 μm and thickness-0.5 μm. The theoretical and FEM simulations were carried out with five immunoglobulin antibodies, IgA, IgD, IgE, IgG and IgM for the estimation of bacterial antigens. The effect of perforation in cantilever beam and molecular size of antibody and antigen on the performance of the sensor has been studied. The cantilever beam without perforation showed a deflection of 1.8 e + 02 μm whereas the cantilever beam with perforation showed an increase deflection of 1.9 e + 02 μm. With IgG, the difference between analytical and simulation values is positive and low especially with low molecular weight antigens Pseudomonas aeruginosa and Treponema pallidum. The low molecular weight IgG influences the antigen-antibody interaction more fvourably. The simulated perforated rectangular cantilever beam with IgG antibody is a more promising model for the fabrication of a sensor for the estimation of highly motile Pseudomonas aeruginosa and Treponema pallidum.
基金supported by the Scientific Research Fund of Zhejiang Provincial Education Department,China(Grant No 20060677)
文摘Based on the vectorial Ftayleigh-Sommerfeld integral formula and the complex Gaussian expansion of the hardedge aperture function, an analytical propagation expression for a nonparaxial vectorial off-axis Lorentz beam passing through a rectangular aperture is derived. The unapertured case, the far field expression and the scalar paraxial result are also presented as special cases of the general formulae, respectively. Some numerical examples are also given to show the propagation characteristics of a nonparaxial vectorial off-axis Lorentz beam through a rectangular aperture. It is indicated that the f parameter, the off-axis displacement and the truncation parameter all play an important role in determining nonparaxial propagation behaviour.
