The growing need for enhanced heat dissipation is compelling the development of more effective heat exchangers.Innovation inspired by nature bionics,four types of leaf-shaped pin fins were proposed and four combinatio...The growing need for enhanced heat dissipation is compelling the development of more effective heat exchangers.Innovation inspired by nature bionics,four types of leaf-shaped pin fins were proposed and four combinations of them were considered.The leaf-shaped design of the cooling pin fin enhances uniformity and synergy,effectively creating an optimized flow path that boosts cooling performance.Eight three-dimensional conjugate heat transfer models in staggered arrangement were developed using ANSYS-Fluent software.Aluminum6061material was used as the heat sinkmaterial and single-phase liquid water flowed through the rectangular channel where the Reynolds(R_(e))number varies from 40 to 100.Using the same boundary conditions as the software simulations,two leaf-shaped channels were printed to validate numerical models.Velocity field and temperature differences of the eight proposed leaf-shaped pin fins configurations were discussed by comparison with cylindrical pin fins.Based on the findings of this study,at a Reynolds number of 80,the Leaf B Staggered Array(LBSA)records a maximum temperature that is 0.72 K lower than that of the cylindrical pin fins arrangement.Additionally,the LBSA exhibits a reduction in the friction factor by approximately 33.3%relative to the circular pin fins array under the same R_(e).This implies that the design of LBSA has been optimized to provide better heat dissipation performance while maintaining lower energy consumption.Furthermore,the LBSA demonstrates the most favorable thermal-hydraulic performance index(TPI),which is 1.18 times higher than that of the circular pin fins arrangement at R_(e)=80.The temperature reduction and friction factor reduction of the lobed channel is more pronounced than that of the conventional cooling channel,highlighting its potential to increase heat transfer efficiency and reduce energy consumption in practical applications.展开更多
The flow of liquids in open channels has been studied since ancient Rome. However, the vast majority of published reports on flow in open channels are focused on the transport of drinking water and sewage disposal. Th...The flow of liquids in open channels has been studied since ancient Rome. However, the vast majority of published reports on flow in open channels are focused on the transport of drinking water and sewage disposal. The literature on the transport of molten metals in open channels is quite scarce. In this work, the uniform flow of pig iron and molten aluminum in rectangular open channels is studied. Specific energy curves are constructed and critical heights are analytically determined. The transition from subcritical to supercritical flow is analyzed as a function of the angle of inclination of the channel and the roughness of its walls. Manning’s equation is applied to the pig iron flow using data reported in the literature for molten aluminum. The need to correct the roughness coefficient for pig iron is observed in order to obtain results consistent with those previously reported.展开更多
Experimental and numerical investigations have been conducted to study turbulent flow of water and heat transfer characteristics in a rectangular channel with discontinuous crossed ribs and grooves.The tests investiga...Experimental and numerical investigations have been conducted to study turbulent flow of water and heat transfer characteristics in a rectangular channel with discontinuous crossed ribs and grooves.The tests investigated the overall heat transfer performance and friction factor in ribbed and ribbed-grooved channels with rib angle of 30°.The experimental results show that the overall thermo-hydraulic performance for ribbed-grooved channel is increased by 10%-13.6% when compared to ribbed channel.The investigation on the effects of different rib angles and rib pitches on heat transfer characteristics and friction factor in ribbed-grooved channel was carried out using Fluent with SST(shear-stress transport) k-ω turbulence model.The numerical results indicate that the case for rib angle of 45° shows the best overall thermo-hydraulic performance,about 18%-36% higher than the case for rib angle of 0°.In addition,the flow patterns and local heat transfer characteristics for ribbed and ribbed-grooved channels based on the numerical simulation were also analyzed to reveal the mechanism of heat transfer enhancement.展开更多
Experiments on subcooled flow boiling have been conducted using water in a rectangular flow channel.Similar to the coolant channel in internal combustion engines(IC engines),the flow channel in this experiment was asy...Experiments on subcooled flow boiling have been conducted using water in a rectangular flow channel.Similar to the coolant channel in internal combustion engines(IC engines),the flow channel in this experiment was asymmetrically heated.Bubble images were captured using a high speed camera from the side view of the channel.The experimental conditions in terms of bulk temperature,bulk velocity,pressure and heat flux ranged from 65°C–75°C,0.25 m/s–0.75 m/s,1–1.7 bar and 490 kW/m2–700 kW/m2,respectively.On the basis of these tests,a statistical analysis of the bubble size has been conducted considering a population of 1400 samples.It has been found that the mean Sauter bubble diameter increases with the decrease of subcooling,bulk velocity,pressure and increased heat flux.A modified correlation has been finally proposed to predict the mean Sauter bubble diameter under subcooled flow boiling conditions upstream of the onset of significant void,which shows good accuracy with the experimental results.展开更多
For the multipath fading on electromagnetic waves of wireless communication in the confined areas,the rectangular tunnel cooperative communication system was established based on the multimode channel model and the ch...For the multipath fading on electromagnetic waves of wireless communication in the confined areas,the rectangular tunnel cooperative communication system was established based on the multimode channel model and the channel capacity formula derivation was obtained.On the optimal criterion of the channel capacity,the power allocation methods of both amplifying and forwarding(AF) and decoding and forwarding(DF) cooperative communication systems were proposed in the limitation of the total power to maximize the channel capacity.The mode selection methods of single input single output(SISO) and single input multiple output(SIMO) models in the rectangular tunnel,through which the higher channel capacity can be obtained,were put forward as well.The theoretical analysis and simulation comparison show that,channel capacity of the wireless communication system in the rectangular tunnel can be effectively enhanced through the cooperative technology;channel capacity of the rectangular tunnel under complicated conditions is maximized through the proposed power allocation methods,and the optimal cooperative mode of the channel capacity can be chosen according to the cooperative mode selection methods given in the paper.展开更多
The lateral distributions of depth-averaged velocity in open compound channels with emerged and submerged vegetated floodplains were analyzed based on the analytical solution of the depth-integrated Reynolds-Averaged ...The lateral distributions of depth-averaged velocity in open compound channels with emerged and submerged vegetated floodplains were analyzed based on the analytical solution of the depth-integrated Reynolds-Averaged Navier-Stokes equation with a term to account for the effects of vegetation.The three cases considered for open channels were two-stage rectangular channel with emerged vegetated floodplain,rectangular channel with submerged vegetated corner,and two-stage rectangular channel with submerged vegetated floodplain,respectively.To predict the depth-averaged velocity with submerged vegetated floodplains,we proposed a new method based on a two-layer approach where flow above and through the vegetation layer was described separately.Moreover,further experiments in the two-stage rectangular channel with submerged vegetated floodplain were carried out to verify the results.The analytical solutions of the cases indicated that the corresponding analytical depth-averaged velocity distributions agree well with the simulated and experimental prediction.The analytical solutions of the cases with theoretical foundation and without programming calculation were reasonable and applicable,which were more convenient than numerical simulations.The analytical solutions provided a way for future researches to solve the problems of submerged vegetation and discontinuous phenomenon of depth-averaged velocity at the stage point for compound channels.Understanding the hydraulics of flow in compound channels with vegetated floodplains is very important for supporting the management of fluvial processes.展开更多
The steady, asymmetric and two-dimensional flow of viscous, incompressible and Newtonian fluid through a rectangular channel with splitter plate parallel to walls is investigated numerically. Earlier, the position of ...The steady, asymmetric and two-dimensional flow of viscous, incompressible and Newtonian fluid through a rectangular channel with splitter plate parallel to walls is investigated numerically. Earlier, the position of the splitter plate was taken as a centreline of channel but here it is considered its different positions which cause the asymmetric behaviour of the flow field. The geometric parameter that controls the position of splitter is defined as splitter position parameter a. The plane Poiseuille flow is considered far from upstream and downstream of the splitter. This flow-problem is solved numerically by a numerical scheme comprising a fourth order method, followed by a special finite-method. This numerical scheme transforms the governing equations to system of finite-difference equations, which are solved by point S.O.R. iterative method. In addition, the results obtained are further refined and upgraded by Richardson Extrapolation method. The calculations are carried out for the ranges -1 α R < 10<sup>5</sup>. The results are compared with existing literature regarding the symmetric case (when a = 0) for velocity, vorticity and skin friction distributions. The comparison is very favourable. Moreover, the notable thing is that the decay of vorticity to its downstream value takes place over an increasingly longer scale of x as R increases for symmetric case but it is not so for asymmetric one.展开更多
Due to the shared nature of the wireless medium, the performance of wireless sensor network is often limited by both internal interference and external interference. The internal interference is that simultaneous traf...Due to the shared nature of the wireless medium, the performance of wireless sensor network is often limited by both internal interference and external interference. The internal interference is that simultaneous traffic activity by neighboring nodes in the same network, while the external interference is from wireless transmissions by other types of devices, such as Wi-Fi and Bluetooth nodes. In this paper, we present two channel hopping algorithms for multichannel, single-radio wireless sensor networks. The first algorithm achieves collision-free transmission environment while do not introduce extra control overhead. The second algorithm, in addition to reducing internal interference effects, reduces the external interference effects from Wi-Fi devices. Simulation results show that both of them significantly improve performance in wireless sensor network.展开更多
Fully developed turbulent water-flow structure over one-side repeated-ribs in narrow two-dimensional rectangular channels was investigated experimentally by Particle Image Velocimetry （PIV） and analytically by the s...Fully developed turbulent water-flow structure over one-side repeated-ribs in narrow two-dimensional rectangular channels was investigated experimentally by Particle Image Velocimetry （PIV） and analytically by the standard k-ε and nonlinear k-ε turbulent models. Two rib-pitch to height ratios （p/k） of 10 and 20 were investigated while the rib height was held constant at 4 mm. The rib height-to-channel equivalent diameter ratio （k/De） was 0.1. The streamwise mean velocity and turbulent kinetic energy distributions at six selected axial stations from the center rib for the two Reynolds number （Re） of 7,000 and 20,000 were obtained and compared with the predicted one. The performance ability in predicting separating and reattaching turbulent water-flow between the standard K-ε and nonlinear k-ε models had yielded no clear conclusion. A large-scale turbulent eddy was generated by the rib promoter and then propagated into the mainstream flow, which led to the deformation of the velocity profile. The turbulent kinetic energy was increased about two times higher at p/k = 20 than that at p/k =10 under the two Reynolds numbers. The effect of the p/k value and the Reynolds number （Re） on reattachment length （XR） was investigated and showed that the p/k and Re had no significant effect on the reattachment length beyond a critical value of Re = 15,000 where XR was found to be approximately 4 times of the rib height under water-flow condition.展开更多
基金supported by the Shandong Provincial Natural Science Foundation,China(Grant ZR2024ME136).
文摘The growing need for enhanced heat dissipation is compelling the development of more effective heat exchangers.Innovation inspired by nature bionics,four types of leaf-shaped pin fins were proposed and four combinations of them were considered.The leaf-shaped design of the cooling pin fin enhances uniformity and synergy,effectively creating an optimized flow path that boosts cooling performance.Eight three-dimensional conjugate heat transfer models in staggered arrangement were developed using ANSYS-Fluent software.Aluminum6061material was used as the heat sinkmaterial and single-phase liquid water flowed through the rectangular channel where the Reynolds(R_(e))number varies from 40 to 100.Using the same boundary conditions as the software simulations,two leaf-shaped channels were printed to validate numerical models.Velocity field and temperature differences of the eight proposed leaf-shaped pin fins configurations were discussed by comparison with cylindrical pin fins.Based on the findings of this study,at a Reynolds number of 80,the Leaf B Staggered Array(LBSA)records a maximum temperature that is 0.72 K lower than that of the cylindrical pin fins arrangement.Additionally,the LBSA exhibits a reduction in the friction factor by approximately 33.3%relative to the circular pin fins array under the same R_(e).This implies that the design of LBSA has been optimized to provide better heat dissipation performance while maintaining lower energy consumption.Furthermore,the LBSA demonstrates the most favorable thermal-hydraulic performance index(TPI),which is 1.18 times higher than that of the circular pin fins arrangement at R_(e)=80.The temperature reduction and friction factor reduction of the lobed channel is more pronounced than that of the conventional cooling channel,highlighting its potential to increase heat transfer efficiency and reduce energy consumption in practical applications.
文摘The flow of liquids in open channels has been studied since ancient Rome. However, the vast majority of published reports on flow in open channels are focused on the transport of drinking water and sewage disposal. The literature on the transport of molten metals in open channels is quite scarce. In this work, the uniform flow of pig iron and molten aluminum in rectangular open channels is studied. Specific energy curves are constructed and critical heights are analytically determined. The transition from subcritical to supercritical flow is analyzed as a function of the angle of inclination of the channel and the roughness of its walls. Manning’s equation is applied to the pig iron flow using data reported in the literature for molten aluminum. The need to correct the roughness coefficient for pig iron is observed in order to obtain results consistent with those previously reported.
基金Supported by the Guangdong Science and Technology Project (2008A01070003)
文摘Experimental and numerical investigations have been conducted to study turbulent flow of water and heat transfer characteristics in a rectangular channel with discontinuous crossed ribs and grooves.The tests investigated the overall heat transfer performance and friction factor in ribbed and ribbed-grooved channels with rib angle of 30°.The experimental results show that the overall thermo-hydraulic performance for ribbed-grooved channel is increased by 10%-13.6% when compared to ribbed channel.The investigation on the effects of different rib angles and rib pitches on heat transfer characteristics and friction factor in ribbed-grooved channel was carried out using Fluent with SST(shear-stress transport) k-ω turbulence model.The numerical results indicate that the case for rib angle of 45° shows the best overall thermo-hydraulic performance,about 18%-36% higher than the case for rib angle of 0°.In addition,the flow patterns and local heat transfer characteristics for ribbed and ribbed-grooved channels based on the numerical simulation were also analyzed to reveal the mechanism of heat transfer enhancement.
基金the National Natural Science Foundation of China(Grant No.51576116)the National Natural Science Foundation of Shandong Province(Grant No.ZR2019MEE041)。
文摘Experiments on subcooled flow boiling have been conducted using water in a rectangular flow channel.Similar to the coolant channel in internal combustion engines(IC engines),the flow channel in this experiment was asymmetrically heated.Bubble images were captured using a high speed camera from the side view of the channel.The experimental conditions in terms of bulk temperature,bulk velocity,pressure and heat flux ranged from 65°C–75°C,0.25 m/s–0.75 m/s,1–1.7 bar and 490 kW/m2–700 kW/m2,respectively.On the basis of these tests,a statistical analysis of the bubble size has been conducted considering a population of 1400 samples.It has been found that the mean Sauter bubble diameter increases with the decrease of subcooling,bulk velocity,pressure and increased heat flux.A modified correlation has been finally proposed to predict the mean Sauter bubble diameter under subcooled flow boiling conditions upstream of the onset of significant void,which shows good accuracy with the experimental results.
基金financial supports provided by the National Natural Science Foundation of China (No.51274202)the Fundamental Research Funds for the Central Universities (No.2013RC11)+3 种基金the Science and Technology Achievements Transformation Project of Jiangsu Province (No.BA2012068)the Natural Science Foundation of Jiangsu Province (Nos.BK20130199 and BK20131124)Ceeusro Prospective Joint Research Project of Jiangsu Province (No.BY2014028-01)Great Cultivating Special Project at China University of Mining and Technology (No.2014ZDPY16)
文摘For the multipath fading on electromagnetic waves of wireless communication in the confined areas,the rectangular tunnel cooperative communication system was established based on the multimode channel model and the channel capacity formula derivation was obtained.On the optimal criterion of the channel capacity,the power allocation methods of both amplifying and forwarding(AF) and decoding and forwarding(DF) cooperative communication systems were proposed in the limitation of the total power to maximize the channel capacity.The mode selection methods of single input single output(SISO) and single input multiple output(SIMO) models in the rectangular tunnel,through which the higher channel capacity can be obtained,were put forward as well.The theoretical analysis and simulation comparison show that,channel capacity of the wireless communication system in the rectangular tunnel can be effectively enhanced through the cooperative technology;channel capacity of the rectangular tunnel under complicated conditions is maximized through the proposed power allocation methods,and the optimal cooperative mode of the channel capacity can be chosen according to the cooperative mode selection methods given in the paper.
基金Under the auspices of National Basic Research Program of China(No.2011CB403303)National Key Research and Development Program of China(No.2016YFC0402408-5)National Natural Science Foundation of China(No.51179181,40788001)
文摘The lateral distributions of depth-averaged velocity in open compound channels with emerged and submerged vegetated floodplains were analyzed based on the analytical solution of the depth-integrated Reynolds-Averaged Navier-Stokes equation with a term to account for the effects of vegetation.The three cases considered for open channels were two-stage rectangular channel with emerged vegetated floodplain,rectangular channel with submerged vegetated corner,and two-stage rectangular channel with submerged vegetated floodplain,respectively.To predict the depth-averaged velocity with submerged vegetated floodplains,we proposed a new method based on a two-layer approach where flow above and through the vegetation layer was described separately.Moreover,further experiments in the two-stage rectangular channel with submerged vegetated floodplain were carried out to verify the results.The analytical solutions of the cases indicated that the corresponding analytical depth-averaged velocity distributions agree well with the simulated and experimental prediction.The analytical solutions of the cases with theoretical foundation and without programming calculation were reasonable and applicable,which were more convenient than numerical simulations.The analytical solutions provided a way for future researches to solve the problems of submerged vegetation and discontinuous phenomenon of depth-averaged velocity at the stage point for compound channels.Understanding the hydraulics of flow in compound channels with vegetated floodplains is very important for supporting the management of fluvial processes.
文摘The steady, asymmetric and two-dimensional flow of viscous, incompressible and Newtonian fluid through a rectangular channel with splitter plate parallel to walls is investigated numerically. Earlier, the position of the splitter plate was taken as a centreline of channel but here it is considered its different positions which cause the asymmetric behaviour of the flow field. The geometric parameter that controls the position of splitter is defined as splitter position parameter a. The plane Poiseuille flow is considered far from upstream and downstream of the splitter. This flow-problem is solved numerically by a numerical scheme comprising a fourth order method, followed by a special finite-method. This numerical scheme transforms the governing equations to system of finite-difference equations, which are solved by point S.O.R. iterative method. In addition, the results obtained are further refined and upgraded by Richardson Extrapolation method. The calculations are carried out for the ranges -1 α R < 10<sup>5</sup>. The results are compared with existing literature regarding the symmetric case (when a = 0) for velocity, vorticity and skin friction distributions. The comparison is very favourable. Moreover, the notable thing is that the decay of vorticity to its downstream value takes place over an increasingly longer scale of x as R increases for symmetric case but it is not so for asymmetric one.
基金supported by the Natural Science Foundation of China(No.61574035)National Natural Science Foundation of China(No.61550110244)
文摘Due to the shared nature of the wireless medium, the performance of wireless sensor network is often limited by both internal interference and external interference. The internal interference is that simultaneous traffic activity by neighboring nodes in the same network, while the external interference is from wireless transmissions by other types of devices, such as Wi-Fi and Bluetooth nodes. In this paper, we present two channel hopping algorithms for multichannel, single-radio wireless sensor networks. The first algorithm achieves collision-free transmission environment while do not introduce extra control overhead. The second algorithm, in addition to reducing internal interference effects, reduces the external interference effects from Wi-Fi devices. Simulation results show that both of them significantly improve performance in wireless sensor network.
文摘Fully developed turbulent water-flow structure over one-side repeated-ribs in narrow two-dimensional rectangular channels was investigated experimentally by Particle Image Velocimetry （PIV） and analytically by the standard k-ε and nonlinear k-ε turbulent models. Two rib-pitch to height ratios （p/k） of 10 and 20 were investigated while the rib height was held constant at 4 mm. The rib height-to-channel equivalent diameter ratio （k/De） was 0.1. The streamwise mean velocity and turbulent kinetic energy distributions at six selected axial stations from the center rib for the two Reynolds number （Re） of 7,000 and 20,000 were obtained and compared with the predicted one. The performance ability in predicting separating and reattaching turbulent water-flow between the standard K-ε and nonlinear k-ε models had yielded no clear conclusion. A large-scale turbulent eddy was generated by the rib promoter and then propagated into the mainstream flow, which led to the deformation of the velocity profile. The turbulent kinetic energy was increased about two times higher at p/k = 20 than that at p/k =10 under the two Reynolds numbers. The effect of the p/k value and the Reynolds number （Re） on reattachment length （XR） was investigated and showed that the p/k and Re had no significant effect on the reattachment length beyond a critical value of Re = 15,000 where XR was found to be approximately 4 times of the rib height under water-flow condition.
