An idealized numerical wave flume has been established by finite element method on the bases of Navier Stokes equations through prescribing the appropriate boundary conditions for the open boundary,incident boundary,...An idealized numerical wave flume has been established by finite element method on the bases of Navier Stokes equations through prescribing the appropriate boundary conditions for the open boundary,incident boundary,free surface and solid boundary in this paper.The characteristics of waves propagating over a step have been investigated by this numerical model.The breaker wave height is determined depending on the kinetic criterion.The numerical model is verified by laboratory experiments,and the empirical formula for the damping of wave height due to breaking is also given by experiments.展开更多
An extended interaction oscillator （EIO） generating 120 GHz wave in sub-terahertz waves is studied by using the three-dimensional electromagnetic simulation software CST and PIC codes. A rectangular reentrant couple...An extended interaction oscillator （EIO） generating 120 GHz wave in sub-terahertz waves is studied by using the three-dimensional electromagnetic simulation software CST and PIC codes. A rectangular reentrant coupled-cavity is proposed as the slow-wave structure of EIO. By CST, the circuit parameters including frequency-phase dispersion, interaction impedance and characteristic impedance are simulated and calculated. The operation mode of EIO is chosen very close to the point where βL = 2π with corresponding frequency 120 GHz, the beam voltage 12 kV and the dimensions of the cavity with the period 0.5mm, the height 3mm and the width 1.4mm. Simulation results of beam-wave interaction by PIC show that the exciting frequency is 120.85 GHz and output peak power 465 W with 12-period coupled-cavity with the perveance 0.17 μP. Simulation results indicate that the EIO has very wide range of the operation voltage.展开更多
The Fourier series method was extended for the exact analysis of wave propagation in an infinite rectangular beam.Initially,by solving the three-dimensional elastodynamic equations a general analytic solution was deri...The Fourier series method was extended for the exact analysis of wave propagation in an infinite rectangular beam.Initially,by solving the three-dimensional elastodynamic equations a general analytic solution was derived for wave motion within the beam.And then for the beam with stress-free boundaries,the propagation characteristics of elastic waves were presented.This accurate wave propagation model lays a solid foundation of simultaneous control of coupled waves in the beam.展开更多
A simple nonlinear model is proposed in this paper to study the bending wave in a rectangular piezoelectric laminated beam of infinite length.Based on the constitutive relations for transversely isotropic piezoelectri...A simple nonlinear model is proposed in this paper to study the bending wave in a rectangular piezoelectric laminated beam of infinite length.Based on the constitutive relations for transversely isotropic piezoelectric materials and isotropic elastic materials,combined with some electric conditions,we derive the bending wave equation in a long rectangular piezoelectric laminated beam by using energy method.The nonlinearity considered is geometrically associated with the nonlinear normal strain in the longitudinal beam direction.The shock-wave solution,solitary-wave solution and other exact solutions of the bending wave equation are obtained by the extended F-expansion method.And by using the reductive perturbation method we derive the nonlinear Schrodinger(NLS)equation,further more,the bright and dark solitons are obtained.For those soliton solutions,and some parameters derived by the process of solving soliton solutions,some conclusions are drawn by numerical analysis with some fixed conditions.展开更多
Transmissions of oblique incident wave from a row of rectangular piles are analyzed theoretically. The incident angle of plane wave is taken as g = 90° , there then is the transmission coefficient ｜T｜ = 1 （Thi...Transmissions of oblique incident wave from a row of rectangular piles are analyzed theoretically. The incident angle of plane wave is taken as g = 90° , there then is the transmission coefficient ｜T｜ = 1 （This is a paradox）. In this paper, by means of the approximate relation between the transmitted and incident wave angle found from the shape of a slit, the paradoxical phenomenon is removed. On the basis of the continuality of the pressure and flux and the analysis of flow resistance at the row of rectangular piles, formulas of reflection and transmission coefficients are obtained. The transmission and reflection coefficients predicted by the present model quite agree with those of laboratory experiments in previous references展开更多
With the idea of the phononic crystals, a thin rectangular plate with two-dimensional periodic structure is designed. Flexural wave band structures of such a plate with infinite structure are calculated with the plane...With the idea of the phononic crystals, a thin rectangular plate with two-dimensional periodic structure is designed. Flexural wave band structures of such a plate with infinite structure are calculated with the plane-wave expansion （PWE） method, and directional band gaps are found in the ΓX direction. The acceleration frequency response in the ΓX direction of such a plate with finite structure is simulated with the finite element method and verified with a vibration experiment. The frequency ranges of sharp drops in the calculated and measured acceleration frequency response curves are in basic agreement with those in the band structures. Thin plate is a widely used component in the engineering structures. The existence of band gaps in such periodic structures gives a new idea in vibration control of thin plates.展开更多
With the method of separation of variables and the eigenfunction expansion employed, an analytical solution is presented for the radiation and diffraction of a rectangular structure with an opening near a vertical wal...With the method of separation of variables and the eigenfunction expansion employed, an analytical solution is presented for the radiation and diffraction of a rectangular structure with an opening near a vertical wall in oblique seas, in which the unknown coefficients are determined by the boundary conditions and matching requirement on the interface. The effects of the width of the opening and the angle of incidence on the hydrodynamic characteristics of a rectangular structure with an opening near a vertical wall are mainly studied. The comparisons of the calculation results with wall-present and with wall-absent are also made. The results indicate that the variation trends of the heave added mass and excitation force with wall-present are almost the same as those with wall-absent, and that the peak values in the former case are obviously larger than those in the latter due to the reflection of the vertical wall.展开更多
Based on the characteristics of 1D waves,the stress uniformity process in specimens under different loading conditions of rectangular and half-sine input waves was analyzed in split Hopkinson pressure bar (SHPB) test....Based on the characteristics of 1D waves,the stress uniformity process in specimens under different loading conditions of rectangular and half-sine input waves was analyzed in split Hopkinson pressure bar (SHPB) test.The results show that the times of an elastic wave propa-gating from one end to the other in a specimen to attain stress equilibrium,is related to input wave-forms and relative mechanical impedance between the specimen and the input/output bars.Here-into,with the increae of the relative impedance,the times decreases under rectangular input waves loading,while it increases under half-sine input wave loading.The dimensionless stress value of specimen corresponding to the status of stress equilibrium increases with the increase of the rela-tive mechanical impedance.However,the dimensionless stress value under half-sine input wave loading is significantly lower than the value under rectangular input wave loading for specimen with low mechanical impedance,and the relative differentia of the dimensionless stress values under two loading conditions decreases with the increase of the relative mechanical impedance.In gen-eral,the forced state of specimen with relatively low mechanical impedance under half-sine input wave loading is evidently superior to the state under rectangular input wave loading in SHPB test,and the advantages of forced state under half-sine input wave loading turns weak with the increase of the relative mechanical impedance.展开更多
Inner flange and side wrinkling often occur in rotary-draw bending process of rectangular aluminum alloy wave-guide tubes, and the distribution and magnitude of wrinkling is related to geometrical parameters of the tu...Inner flange and side wrinkling often occur in rotary-draw bending process of rectangular aluminum alloy wave-guide tubes, and the distribution and magnitude of wrinkling is related to geometrical parameters of the tubes. In order to study the effects of geometrical parameters on wrinkling of rectangular wave-guide tubes, a 3D-FE model for rotary-draw bending processes of thin-walled rectangular aluminum alloy wave-guide tubes was built based on the platform of ABA-QUS/Explicit, and its reliability was validated by experiments. Simulation and analysis of the influence laws of geometrical parameters on the wave heights of inner flange and side wrinkling were then carried out. The results show that inner flange wrinkling is the main wrinkling way to rectan- gular wave-guide tubes in rotary-draw bending processes, but side wrinkling cannot be neglected because side wrinkling is 2/3 of inner flange wrinkling when b and h are smaller. Inner flange and side wrinkling increase with increasing b and h; the influence of b on side wrinkling is larger than that of h, while both b and h affect inner flange wrinkling greatly. Inner flange and side wrinkling decrease with increasing R/h; the influence of h on inner flange and side wrinkling is larger than that of R.展开更多
This paper investigates the properties of traveling wave-beam interaction in a rectangular helix traveling-wave-tube （TWT） for a solid sheet electron beam. The ＂hot＂ dispersion equation is obtained by means of the...This paper investigates the properties of traveling wave-beam interaction in a rectangular helix traveling-wave-tube （TWT） for a solid sheet electron beam. The ＂hot＂ dispersion equation is obtained by means of the self-consistent field theory. The small signal analysis,which includes the effects of the beam parameters and slow-wave structure （SWS） parameters,is carried out by theoretical computation. The numerical results show that the bandwidth and the small-signal gain of the rectangular helix TWT increase as the beam current increases;and the beam voltage not obviously influences the small signal gain. Among different rectangular helix structures,the small-signal gain increases as the width of the rectangular helix SWS increases,however,the bandwidth decreases whether structure parameters a and L or ψ and L are fixed or not.In addition,a comparison of the small-signal gain of this structure with a conventional round helix is made.The presented analysis will be useful for the design of the TWT with a rectangular helix circuit.展开更多
Millimeter-wave traveling-wave tube （TWT） prevails nowadays as the amplifier for radar, communication and electronic countermeasures. The rectangular waveguide grating is a promising all-metal interaction circuit fo...Millimeter-wave traveling-wave tube （TWT） prevails nowadays as the amplifier for radar, communication and electronic countermeasures. The rectangular waveguide grating is a promising all-metal interaction circuit for the millimeter-wave TWT with advantages of high power capacity, fine heat dissipation, scalability to smaller dimen- sions for shorter wavelengths, compact structure and robust performance. Compared with the traditional closed structure, the open rectangular waveguide grating （ORWG） has wider bandwidth, lower cut-off frequency, and higher machining precision for higher working frequencies due to the open transverse. It is a potential structure that can work in the millimeter wave and even Terahertz band. The rf characteristics including dispersion and interaction impedance are investigated by both theoretic calculation and software simulation. The influences of the structure parameters are also discussed and compared, and the theoretical results agree well with the simula- tion results. Based on the study, the ORWG will favor the design of a broadband and high-power millimeter-wave TWT.展开更多
A method of designing an E-plane power combiner composed of two quarter-arc bent rectangular waveguides is proposed for sub-THz and THz waves. The quarter-arc bent-waveguide power combiner has a simple geometry which ...A method of designing an E-plane power combiner composed of two quarter-arc bent rectangular waveguides is proposed for sub-THz and THz waves. The quarter-arc bent-waveguide power combiner has a simple geometry which is easy to design and fabricate. By HFSS codes, the physical mechanism and performance of the power combiner are analyzed, and the relationship between the output characteristics and the structure/operating parameters is given. Simulation results show that our power combiner is suitable for the combining of two equalpower and reversed-phase signals, the bandwidth of the combiner is wide and can be adjusted by the radius of the quarter-arc, and the isolation performance of the combiner can be improved by adding thin film resistive septa at the junction of two quarter-arc bent waveguides. Meanwhile, an approximate method based on the analytic geometrical analysis is given to design this power combiner for different frequency bands.展开更多
This paper focuses on a new rectangular waveguide grating Slow-Wave Structure (SWS) with cosine-shaped grooves and studies the propagation characteristics of the wave in the SWS. By using the approximate field-matchin...This paper focuses on a new rectangular waveguide grating Slow-Wave Structure (SWS) with cosine-shaped grooves and studies the propagation characteristics of the wave in the SWS. By using the approximate field-matching conditions,the dispersion equation and the coupling impedance of this circuit are obtained. The dispersion curves and coupling impedances of the fundamental wave are calculated and the influences of the various geometrical dimensions are discussed. The results show that the bandwidth of the cosine-shaped groove SWS is much wider than that of rectangular-shaped groove one. And reducing the groove width can broaden the frequency-band and decrease the phase-velocity,while increment of the groove-depth can also decrease phase-velocity. For above cases,the coupling impedance is more than 16Ω. The present analysis will be helpful on further study and design of the RF systems used in millimeter wave Traveling Wave Tube (TWT).展开更多
Rectangular explosive charges are usually used in military or civilian explosive transportation and storage.The effects of shape parameters and detonation positions on the peak overpressure and maximum impulse of blas...Rectangular explosive charges are usually used in military or civilian explosive transportation and storage.The effects of shape parameters and detonation positions on the peak overpressure and maximum impulse of blasts lack comprehensive investigation,which is significant for the design of blast-resistant structures.In this paper,the side-length ratio of the rectangle,orientation,and detonation position of the charge are chosen as controlling parameters to investigate their influence on blast loads in the scaled distances of the gauges ranging from 0.63 to 10.54 m/kg^(1/3) with well validated 3D numerical simulations.The results show that there is a large difference in the near-field spatial distribution of the blast load of the rectangular charge;if the blast load of the rectangular charge is simply evaluated with the spherical charge,the maximum peak overpressure(maximum impulse)will be underestimated by a factor of 7.46(4.84).This must be taken seriously by blast-resistant structure designers.With the increase in the scaled distance,when the critical scaled distance is greater than 6.32(7.38)m/kg^(1/3),the influence of the charge shape on the maximum peak overpressure(maximum impulse)of the spatial blast load can be ignored.In general,the impact of detonation of the charge at the end on the maximum peak overpressure is greater compared with central detonation,but for the impact of the maximum impulse,it is necessary to pay attention to the side-length ratio of the rectangular charge and the specific detonation position on the end face.Furthermore,the structural response of steel plates placed at different azimuths under the blast load of a rectangular charge is preliminarily analyzed,and the results show that the deformation and energy of the plates are consistent with the distribution of the blast load.These analysis results provide a reference for the explosion protection design in near-field air explosions.展开更多
In this paper,a terahertz slotted waveguide array antenna is designed based on photonic crystal,which can realize efficient radiation of terahertz waves.The electromagnetic wave is fed from the rectangular waveguide a...In this paper,a terahertz slotted waveguide array antenna is designed based on photonic crystal,which can realize efficient radiation of terahertz waves.The electromagnetic wave is fed from the rectangular waveguide at the bottom of the antenna,coupled to photonic crystal waveguide through photonic crystal cavity,and radiated outward through slots at the top layer of antenna.The simulation results show that the antenna achieves a peak gain of 13.45 dBi at 360 GHz,a half-power beam width of 10.9°,and a side lobe level of−13.9 dB.The antenna based on photonic crystal has the advantages of low profile,low loss,and high radiation efficiency,which can be applied to terahertz wireless communication systems.展开更多
This paper describes experimental and theoretical investigations of Tuned Liquid Damper (TLD) characteristics for suppressing the wave-excited structural vibration. The structural model for the experiments is scaled a...This paper describes experimental and theoretical investigations of Tuned Liquid Damper (TLD) characteristics for suppressing the wave-excited structural vibration. The structural model for the experiments is scaled according to a full size offshore platform by matching their dynamic properties. Rectangular TLDs of different sizes with partially filled liquid are examined. By observing the performance and behavior of TLDs through laboratory experiments, the Study investigates the influence of a number of parameters, including container size, container shape, frequency ratio, and incident wave characteristics. In an analytical study, a mathematical model that describes the nonlinear behavior of liquid in TLD and the interaction of TLD and structure is prerequisite. The validity of the model is evaluated and simulating results can reasonably match the corresponding experimental results.展开更多
In this paper, the improved version of the meshless singular boundary method (ISBM) is developed for analyzing the hydrodynamic performance of bottom-standing submerged breakwaters in regular normally incident waves. ...In this paper, the improved version of the meshless singular boundary method (ISBM) is developed for analyzing the hydrodynamic performance of bottom-standing submerged breakwaters in regular normally incident waves. Both the single and dual prismatic breakwaters of rectangular and trapezoidal forms are examined. Only the impermeable breakwaters are considered in this study. The physical problem is cast in terms of the Laplace equation governing an irrotational flow and incompressible fluid motion with the appropriate mixed-type boundary conditions, and it is solved numerically using the ISBM. The numerical results are presented in terms of the hydrodynamic quantities of reflection and transmission coefficients. The values are first validated against the data of previous studies, computed, and discussed for a variety of structural conditions, including the height, width, and spacing of breakwater submergence. An excellent agreement is observed between the ISBM results and those of other methods. The breakwater width is found to feature marginal effects compared with the height. The present method is shown to accurately predict the resonant conditions at which the maximum reflection and transmission occur. The trapezoidal breakwaters are found to generally present a wide spectrum of reflections, suggesting that they would function better than the rectangular breakwaters. The dual breakwater systems are confirmed to perform much better than single structures.展开更多
Implicit large-eddy simulation of an over-expanded screeching rectangular jet is performed with a seventh-order finite difference scheme.Good agreement is found between the predicted flow-and acoustic fields with the ...Implicit large-eddy simulation of an over-expanded screeching rectangular jet is performed with a seventh-order finite difference scheme.Good agreement is found between the predicted flow-and acoustic fields with the experimental observations.Fourier decomposition,phase-averaging analysis and Spectral Proper Orthogonal Decomposition(SPOD)are used to investigate the origin of the screech,the shock leakage during the shear-layer flapping,and the distinguishing fluctuating characteristics in the minor-and major-axis plane of the rectangular jet.It finds that the screech is radiated from the end of the forth shock cell,where the interaction of the shock waves with the shear layer causes periodic leakages of shock-wave tips in the minor-axis plane,resulting in the generation of intense acoustic waves in the surrounding air.An obvious flapping mode at the same frequency of the screech is captured in the minor-axis plane and dominates the dynamic motions of the rectangular jet.The SPOD modes of pressure and velocity fluctuations at the screech frequency help to reveal the relationship between the screech generation and the coherent structures.展开更多
文摘An idealized numerical wave flume has been established by finite element method on the bases of Navier Stokes equations through prescribing the appropriate boundary conditions for the open boundary,incident boundary,free surface and solid boundary in this paper.The characteristics of waves propagating over a step have been investigated by this numerical model.The breaker wave height is determined depending on the kinetic criterion.The numerical model is verified by laboratory experiments,and the empirical formula for the damping of wave height due to breaking is also given by experiments.
基金supported by the National Natural Science Foundation of China (Grant No 10676110)the National Basic Research Program of China (Grant No 2007CB310401)
文摘An extended interaction oscillator （EIO） generating 120 GHz wave in sub-terahertz waves is studied by using the three-dimensional electromagnetic simulation software CST and PIC codes. A rectangular reentrant coupled-cavity is proposed as the slow-wave structure of EIO. By CST, the circuit parameters including frequency-phase dispersion, interaction impedance and characteristic impedance are simulated and calculated. The operation mode of EIO is chosen very close to the point where βL = 2π with corresponding frequency 120 GHz, the beam voltage 12 kV and the dimensions of the cavity with the period 0.5mm, the height 3mm and the width 1.4mm. Simulation results of beam-wave interaction by PIC show that the exciting frequency is 120.85 GHz and output peak power 465 W with 12-period coupled-cavity with the perveance 0.17 μP. Simulation results indicate that the EIO has very wide range of the operation voltage.
文摘The Fourier series method was extended for the exact analysis of wave propagation in an infinite rectangular beam.Initially,by solving the three-dimensional elastodynamic equations a general analytic solution was derived for wave motion within the beam.And then for the beam with stress-free boundaries,the propagation characteristics of elastic waves were presented.This accurate wave propagation model lays a solid foundation of simultaneous control of coupled waves in the beam.
文摘A simple nonlinear model is proposed in this paper to study the bending wave in a rectangular piezoelectric laminated beam of infinite length.Based on the constitutive relations for transversely isotropic piezoelectric materials and isotropic elastic materials,combined with some electric conditions,we derive the bending wave equation in a long rectangular piezoelectric laminated beam by using energy method.The nonlinearity considered is geometrically associated with the nonlinear normal strain in the longitudinal beam direction.The shock-wave solution,solitary-wave solution and other exact solutions of the bending wave equation are obtained by the extended F-expansion method.And by using the reductive perturbation method we derive the nonlinear Schrodinger(NLS)equation,further more,the bright and dark solitons are obtained.For those soliton solutions,and some parameters derived by the process of solving soliton solutions,some conclusions are drawn by numerical analysis with some fixed conditions.
文摘Transmissions of oblique incident wave from a row of rectangular piles are analyzed theoretically. The incident angle of plane wave is taken as g = 90° , there then is the transmission coefficient ｜T｜ = 1 （This is a paradox）. In this paper, by means of the approximate relation between the transmitted and incident wave angle found from the shape of a slit, the paradoxical phenomenon is removed. On the basis of the continuality of the pressure and flux and the analysis of flow resistance at the row of rectangular piles, formulas of reflection and transmission coefficients are obtained. The transmission and reflection coefficients predicted by the present model quite agree with those of laboratory experiments in previous references
基金This project is supported by National Basic Research Program of China (973Program, No.51307).
文摘With the idea of the phononic crystals, a thin rectangular plate with two-dimensional periodic structure is designed. Flexural wave band structures of such a plate with infinite structure are calculated with the plane-wave expansion （PWE） method, and directional band gaps are found in the ΓX direction. The acceleration frequency response in the ΓX direction of such a plate with finite structure is simulated with the finite element method and verified with a vibration experiment. The frequency ranges of sharp drops in the calculated and measured acceleration frequency response curves are in basic agreement with those in the band structures. Thin plate is a widely used component in the engineering structures. The existence of band gaps in such periodic structures gives a new idea in vibration control of thin plates.
基金supported by the National Natural Science Foundation of China(Grant Nos.51079082 and 51679132)the Nature Science Foundation of Shanghai City(Grant No.14ZR1419600)the Research Innovation Projects of 2013 Shanghai Postgraduate(Grant No.20131129)
文摘With the method of separation of variables and the eigenfunction expansion employed, an analytical solution is presented for the radiation and diffraction of a rectangular structure with an opening near a vertical wall in oblique seas, in which the unknown coefficients are determined by the boundary conditions and matching requirement on the interface. The effects of the width of the opening and the angle of incidence on the hydrodynamic characteristics of a rectangular structure with an opening near a vertical wall are mainly studied. The comparisons of the calculation results with wall-present and with wall-absent are also made. The results indicate that the variation trends of the heave added mass and excitation force with wall-present are almost the same as those with wall-absent, and that the peak values in the former case are obviously larger than those in the latter due to the reflection of the vertical wall.
基金Supported by National Natural Science Foundation of China (No. 50490274,10472134).
文摘Based on the characteristics of 1D waves,the stress uniformity process in specimens under different loading conditions of rectangular and half-sine input waves was analyzed in split Hopkinson pressure bar (SHPB) test.The results show that the times of an elastic wave propa-gating from one end to the other in a specimen to attain stress equilibrium,is related to input wave-forms and relative mechanical impedance between the specimen and the input/output bars.Here-into,with the increae of the relative impedance,the times decreases under rectangular input waves loading,while it increases under half-sine input wave loading.The dimensionless stress value of specimen corresponding to the status of stress equilibrium increases with the increase of the rela-tive mechanical impedance.However,the dimensionless stress value under half-sine input wave loading is significantly lower than the value under rectangular input wave loading for specimen with low mechanical impedance,and the relative differentia of the dimensionless stress values under two loading conditions decreases with the increase of the relative mechanical impedance.In gen-eral,the forced state of specimen with relatively low mechanical impedance under half-sine input wave loading is evidently superior to the state under rectangular input wave loading in SHPB test,and the advantages of forced state under half-sine input wave loading turns weak with the increase of the relative mechanical impedance.
基金financial support of the National Natural Science Foundation of China (No. 50975235 and 50575184)the 111 Project(B08040)
文摘Inner flange and side wrinkling often occur in rotary-draw bending process of rectangular aluminum alloy wave-guide tubes, and the distribution and magnitude of wrinkling is related to geometrical parameters of the tubes. In order to study the effects of geometrical parameters on wrinkling of rectangular wave-guide tubes, a 3D-FE model for rotary-draw bending processes of thin-walled rectangular aluminum alloy wave-guide tubes was built based on the platform of ABA-QUS/Explicit, and its reliability was validated by experiments. Simulation and analysis of the influence laws of geometrical parameters on the wave heights of inner flange and side wrinkling were then carried out. The results show that inner flange wrinkling is the main wrinkling way to rectan- gular wave-guide tubes in rotary-draw bending processes, but side wrinkling cannot be neglected because side wrinkling is 2/3 of inner flange wrinkling when b and h are smaller. Inner flange and side wrinkling increase with increasing b and h; the influence of b on side wrinkling is larger than that of h, while both b and h affect inner flange wrinkling greatly. Inner flange and side wrinkling decrease with increasing R/h; the influence of h on inner flange and side wrinkling is larger than that of R.
基金Project supported in part by the National Natural Science Foundation of China (Grant No 60532010)the Talent Fund of Chinese Education Administration
文摘This paper investigates the properties of traveling wave-beam interaction in a rectangular helix traveling-wave-tube （TWT） for a solid sheet electron beam. The ＂hot＂ dispersion equation is obtained by means of the self-consistent field theory. The small signal analysis,which includes the effects of the beam parameters and slow-wave structure （SWS） parameters,is carried out by theoretical computation. The numerical results show that the bandwidth and the small-signal gain of the rectangular helix TWT increase as the beam current increases;and the beam voltage not obviously influences the small signal gain. Among different rectangular helix structures,the small-signal gain increases as the width of the rectangular helix SWS increases,however,the bandwidth decreases whether structure parameters a and L or ψ and L are fixed or not.In addition,a comparison of the small-signal gain of this structure with a conventional round helix is made.The presented analysis will be useful for the design of the TWT with a rectangular helix circuit.
基金Supported by the National Natural Science Foundation of China under Grant No 61271029the National Science Fund for Distinguished Young Scholars of China under Grant No 61125103the National Research Foundation of Korea under Grant No MSIP:NRF-2009-0083512
文摘Millimeter-wave traveling-wave tube （TWT） prevails nowadays as the amplifier for radar, communication and electronic countermeasures. The rectangular waveguide grating is a promising all-metal interaction circuit for the millimeter-wave TWT with advantages of high power capacity, fine heat dissipation, scalability to smaller dimen- sions for shorter wavelengths, compact structure and robust performance. Compared with the traditional closed structure, the open rectangular waveguide grating （ORWG） has wider bandwidth, lower cut-off frequency, and higher machining precision for higher working frequencies due to the open transverse. It is a potential structure that can work in the millimeter wave and even Terahertz band. The rf characteristics including dispersion and interaction impedance are investigated by both theoretic calculation and software simulation. The influences of the structure parameters are also discussed and compared, and the theoretical results agree well with the simula- tion results. Based on the study, the ORWG will favor the design of a broadband and high-power millimeter-wave TWT.
基金Supported by the National Natural Science Foundation of China under Grant No 11075032the Fundamental Research Funds for the Central Universities under Grant No ZYGX2014J033
文摘A method of designing an E-plane power combiner composed of two quarter-arc bent rectangular waveguides is proposed for sub-THz and THz waves. The quarter-arc bent-waveguide power combiner has a simple geometry which is easy to design and fabricate. By HFSS codes, the physical mechanism and performance of the power combiner are analyzed, and the relationship between the output characteristics and the structure/operating parameters is given. Simulation results show that our power combiner is suitable for the combining of two equalpower and reversed-phase signals, the bandwidth of the combiner is wide and can be adjusted by the radius of the quarter-arc, and the isolation performance of the combiner can be improved by adding thin film resistive septa at the junction of two quarter-arc bent waveguides. Meanwhile, an approximate method based on the analytic geometrical analysis is given to design this power combiner for different frequency bands.
文摘This paper focuses on a new rectangular waveguide grating Slow-Wave Structure (SWS) with cosine-shaped grooves and studies the propagation characteristics of the wave in the SWS. By using the approximate field-matching conditions,the dispersion equation and the coupling impedance of this circuit are obtained. The dispersion curves and coupling impedances of the fundamental wave are calculated and the influences of the various geometrical dimensions are discussed. The results show that the bandwidth of the cosine-shaped groove SWS is much wider than that of rectangular-shaped groove one. And reducing the groove width can broaden the frequency-band and decrease the phase-velocity,while increment of the groove-depth can also decrease phase-velocity. For above cases,the coupling impedance is more than 16Ω. The present analysis will be helpful on further study and design of the RF systems used in millimeter wave Traveling Wave Tube (TWT).
基金supported by the National Science Foundation of China(Grant No.14102428)the Fundamental Research Funds for the Central Universities(Grant Nos.WK2090000019 and YD2480002002)the Open Research Fund of Anhui Province Key Laboratory of Green Building and Assembly Construction,Anhui Institute of Building Research&Design(Grant No.2021-JKYL-005).
文摘Rectangular explosive charges are usually used in military or civilian explosive transportation and storage.The effects of shape parameters and detonation positions on the peak overpressure and maximum impulse of blasts lack comprehensive investigation,which is significant for the design of blast-resistant structures.In this paper,the side-length ratio of the rectangle,orientation,and detonation position of the charge are chosen as controlling parameters to investigate their influence on blast loads in the scaled distances of the gauges ranging from 0.63 to 10.54 m/kg^(1/3) with well validated 3D numerical simulations.The results show that there is a large difference in the near-field spatial distribution of the blast load of the rectangular charge;if the blast load of the rectangular charge is simply evaluated with the spherical charge,the maximum peak overpressure(maximum impulse)will be underestimated by a factor of 7.46(4.84).This must be taken seriously by blast-resistant structure designers.With the increase in the scaled distance,when the critical scaled distance is greater than 6.32(7.38)m/kg^(1/3),the influence of the charge shape on the maximum peak overpressure(maximum impulse)of the spatial blast load can be ignored.In general,the impact of detonation of the charge at the end on the maximum peak overpressure is greater compared with central detonation,but for the impact of the maximum impulse,it is necessary to pay attention to the side-length ratio of the rectangular charge and the specific detonation position on the end face.Furthermore,the structural response of steel plates placed at different azimuths under the blast load of a rectangular charge is preliminarily analyzed,and the results show that the deformation and energy of the plates are consistent with the distribution of the blast load.These analysis results provide a reference for the explosion protection design in near-field air explosions.
基金supported by the National Natural Science Foundation of China(No.62375031)the Basic Research Project of Chongqing Science and Technology Commission(No.CSTC-2021jcyj-bsh0194)the Science and Technology Research Program of Chongqing Municipal Education Commission(No.KJQN202200602)。
文摘In this paper,a terahertz slotted waveguide array antenna is designed based on photonic crystal,which can realize efficient radiation of terahertz waves.The electromagnetic wave is fed from the rectangular waveguide at the bottom of the antenna,coupled to photonic crystal waveguide through photonic crystal cavity,and radiated outward through slots at the top layer of antenna.The simulation results show that the antenna achieves a peak gain of 13.45 dBi at 360 GHz,a half-power beam width of 10.9°,and a side lobe level of−13.9 dB.The antenna based on photonic crystal has the advantages of low profile,low loss,and high radiation efficiency,which can be applied to terahertz wireless communication systems.
基金This research was financially supported partially by the National Science Foundation of Japan under grant No.10555173 This work was partially supported by the Scholarship from Japan Ministry of Education,Science and Culture.
文摘This paper describes experimental and theoretical investigations of Tuned Liquid Damper (TLD) characteristics for suppressing the wave-excited structural vibration. The structural model for the experiments is scaled according to a full size offshore platform by matching their dynamic properties. Rectangular TLDs of different sizes with partially filled liquid are examined. By observing the performance and behavior of TLDs through laboratory experiments, the Study investigates the influence of a number of parameters, including container size, container shape, frequency ratio, and incident wave characteristics. In an analytical study, a mathematical model that describes the nonlinear behavior of liquid in TLD and the interaction of TLD and structure is prerequisite. The validity of the model is evaluated and simulating results can reasonably match the corresponding experimental results.
基金supported by the Direction Général des Enseignements et de la Formation Supérieure of Algeria under Grant CNEPRU number G0301920140029
文摘In this paper, the improved version of the meshless singular boundary method (ISBM) is developed for analyzing the hydrodynamic performance of bottom-standing submerged breakwaters in regular normally incident waves. Both the single and dual prismatic breakwaters of rectangular and trapezoidal forms are examined. Only the impermeable breakwaters are considered in this study. The physical problem is cast in terms of the Laplace equation governing an irrotational flow and incompressible fluid motion with the appropriate mixed-type boundary conditions, and it is solved numerically using the ISBM. The numerical results are presented in terms of the hydrodynamic quantities of reflection and transmission coefficients. The values are first validated against the data of previous studies, computed, and discussed for a variety of structural conditions, including the height, width, and spacing of breakwater submergence. An excellent agreement is observed between the ISBM results and those of other methods. The breakwater width is found to feature marginal effects compared with the height. The present method is shown to accurately predict the resonant conditions at which the maximum reflection and transmission occur. The trapezoidal breakwaters are found to generally present a wide spectrum of reflections, suggesting that they would function better than the rectangular breakwaters. The dual breakwater systems are confirmed to perform much better than single structures.
基金support of the National Natural Science Foundation of China(No.12372221)is acknowledged。
文摘Implicit large-eddy simulation of an over-expanded screeching rectangular jet is performed with a seventh-order finite difference scheme.Good agreement is found between the predicted flow-and acoustic fields with the experimental observations.Fourier decomposition,phase-averaging analysis and Spectral Proper Orthogonal Decomposition(SPOD)are used to investigate the origin of the screech,the shock leakage during the shear-layer flapping,and the distinguishing fluctuating characteristics in the minor-and major-axis plane of the rectangular jet.It finds that the screech is radiated from the end of the forth shock cell,where the interaction of the shock waves with the shear layer causes periodic leakages of shock-wave tips in the minor-axis plane,resulting in the generation of intense acoustic waves in the surrounding air.An obvious flapping mode at the same frequency of the screech is captured in the minor-axis plane and dominates the dynamic motions of the rectangular jet.The SPOD modes of pressure and velocity fluctuations at the screech frequency help to reveal the relationship between the screech generation and the coherent structures.
