Rydberg-atom-based superheterodyne receivers integrate self-calibration,high sensitivity,a wide operational frequency range,and phase/frequency resolved detection capabilities,demonstrating broad application prospects...Rydberg-atom-based superheterodyne receivers integrate self-calibration,high sensitivity,a wide operational frequency range,and phase/frequency resolved detection capabilities,demonstrating broad application prospects as nextgeneration microwave receivers.Linear gain and linear dynamic range(LDR)are critical metrics for assessing receiver sensitivity and demodulation fidelity,respectively.We numerically solve the four-level master equation and then employ particle swarm optimization(PSO)algorithm to co-optimize linear gain and LDR in atomic superheterodyne receivers based on balanced homodyne detection.Further,we systematically account for dominant dephasing mechanisms in the simulation,encompassing spontaneous decay,transit dephasing,collision dephasing,laser linewidth dephasing,and Doppler averaging.Homodyne readout utilizes both the real and imaginary parts of polarizability for sensing.In the case of the photon shot noise limit,its signal-to-noise ratio(SNR)expression resembles that of direct optical-intensity readout.However,the inherent coherent subtraction operation in homodyne detection significantly suppresses common-mode noise,while appropriately increasing the reference beam power enhances the gain in practical experiments.Indeed,this co-optimization problem,characterized by a high-dimensional variable space,two objectives,and non-convexity,is well-suited for solution by PSO.In addition,probe and coupling detuning contribute equivalently to polarizability and compensate for each other owing to Doppler averaging,thereby reducing the optimization variable space by one.By adopting a product form of linear gain and LDR as the fitness function,the PSO achieves rapid convergence.Here,the effectiveness of the PSO results is verified via the total harmonic distortion(THD).The relative error-based LDR calculation method we proposed efficiently measures receiver response linearity with consuming fewer computational resources.This research is expected to offer valuable insights into enhancing the performance of Rydberg-atom-based superheterodyne receivers.展开更多
This paper highlights the crucial role of Indonesia’s GNSS receiver network in advancing Equatorial Plasma Bubble(EPB)studies in Southeast and East Asia,as ionospheric irregularities within EPB can disrupt GNSS signa...This paper highlights the crucial role of Indonesia’s GNSS receiver network in advancing Equatorial Plasma Bubble(EPB)studies in Southeast and East Asia,as ionospheric irregularities within EPB can disrupt GNSS signals and degrade positioning accuracy.Managed by the Indonesian Geospatial Information Agency(BIG),the Indonesia Continuously Operating Reference Station(Ina-CORS)network comprises over 300 GNSS receivers spanning equatorial to southern low-latitude regions.Ina-CORS is uniquely situated to monitor EPB generation,zonal drift,and dissipation across Southeast Asia.We provide a practical tool for EPB research,by sharing two-dimensional rate of Total Electron Content(TEC)change index(ROTI)derived from this network.We generate ROTI maps with a 10-minute resolution,and samples from May 2024 are publicly available for further scientific research.Two preliminary findings from the ROTI maps of Ina-CORS are noteworthy.First,the Ina-CORS ROTI maps reveal that the irregularities within a broader EPB structure persist longer,increasing the potential for these irregularities to migrate farther eastward.Second,we demonstrate that combined ROTI maps from Ina-CORS and GNSS receivers in East Asia and Australia can be used to monitor the development of ionospheric irregularities in Southeast and East Asia.We have demonstrated the combined ROTI maps to capture the development of ionospheric irregularities in the Southeast/East Asian sector during the G5 Geomagnetic Storm on May 11,2024.We observed simultaneous ionospheric irregularities in Japan and Australia,respectively propagating northwestward and southwestward,before midnight,whereas Southeast Asia’s equatorial and low-latitude regions exhibited irregularities post-midnight.By sharing ROTI maps from Indonesia and integrating them with regional GNSS networks,researchers can conduct comprehensive EPB studies,enhancing the understanding of EPB behavior across Southeast and East Asia and contributing significantly to ionospheric research.展开更多
The Red Sea-Gulf of Suez-Cairo-Alexandria Clysmic-Trend in northern Egypt is the main earthquake zone in the country,with a moderate-to-high seismic hazard and a history of significant earthquakes caused by rifting an...The Red Sea-Gulf of Suez-Cairo-Alexandria Clysmic-Trend in northern Egypt is the main earthquake zone in the country,with a moderate-to-high seismic hazard and a history of significant earthquakes caused by rifting and active faulting.To improve our understanding of the tectonic and seismic processes in this area,more comprehensive imaging of the crustal structure is required.This can be achieved by increasing the number of receiver functions(RFs)recorded by the seismic stations in northern Egypt and the southeastern Mediterranean.Data handling and processing should also be automated to increase process efficiency.In this study,we developed a capsule neural network for automated selection of RFs.The model was trained on a dataset containing RFs(both selected and unselected)from five broadband stations in northern Egypt.Stations SLM,SIWA,KOT,NBNS,and NKL are located in the unstable shelf region of Egypt,where limited knowledge of the deep crustal structure is available.The proposed capsule neural network achieved an average precision of 80%on the test set.The automated selection of RFs using a capsule neural network has the potential to significantly improve the efficiency and accuracy of RF analysis,as demonstrated by the stacking test.This could lead to a better understanding of crustal structure and tectonic processes in northern Egypt and the southeastern Mediterranean.展开更多
In DSP-based SerDes application,it is essential for AFE to implement a pre-ADC equalization to provide a better sig-nal for ADC and DSP.To meet the various equalization requirements of different channel and transmitte...In DSP-based SerDes application,it is essential for AFE to implement a pre-ADC equalization to provide a better sig-nal for ADC and DSP.To meet the various equalization requirements of different channel and transmitter configurations,this paper presents a 112 Gbps DSP-Based PAM4 SerDes receiver with a wide band equalization tuning AFE.The AFE is realized by implementing source degeneration transconductance,feedforward high-pass branch and inductive feedback peaking TIA.The AFE offers a flexible equalization gain tuning of up to 17.5 dB at Nyquist frequency without affecting the DC gain.With the pro-posed AFE,the receiver demonstrates eye opening after digital FIR equalization and achieves 6×10^(-9) BER with a 29.6 dB inser-tion loss channel.展开更多
The geodetic detrending(GD)methodology was introduced in the past decade and has opened the door to the global monitoring of ionospheric scintillation using global navigation satellite system(GNSS)receivers.The perfor...The geodetic detrending(GD)methodology was introduced in the past decade and has opened the door to the global monitoring of ionospheric scintillation using global navigation satellite system(GNSS)receivers.The performance of GD has been demonstrated in geodetic receivers.However,extending scintillation monitoring to low-cost commercial receivers remains a challenge.Low-cost devices could serve as valuable complements to specialised and much more expensive scintillation monitoring receivers.In this paper,first,a feasibility study was conducted using the GD technique,demonstrating that the scintillation indices derived from the observations of two lowcost receivers(Septentrio Mosaic X5 and UBLOX ZED-F9P)have a resolution similar to that achieved by geodetic receiver models,whose price is one order of magnitude higher.Second,measurements of GNSS signals at different frequencies from the Galileo and global positioning system(GPS)satellites were analysed in a specific experiment over six days of null scintillation.Next,the noise level in the scintillation parameters derived from the experiment was evaluated,which shows that for low-cost receivers,the minimum scintillation detection threshold increases only negligibly compared to geodetic-grade receivers.Moreover,the geometry-free(GF)combination of L1 with a second signal of different frequency was investigated as an alternative to detrending GNSS signals.Finally,for determining the ionospheric fluctuations produced by scintillation,the limitations of using the GF combination versus the uncombined measurements were highlighted.It is concluded that the minimum resolution of scintillation indices derived from low-cost receiver measurements makes it possible to distinguish values associated with periods of scintillation activity from those produced by residual noise from mismodeling.For both geodetic and low-cost receivers,the scintillation detection threshold obtained with uncombined carrier-phase measurements is smaller than that achieved with the classic GF combination.展开更多
The Rydberg atom-based receiver, as a novel type of antenna, demonstrates broad application prospects in the field of microwave communications. However, since Rydberg atomic receivers are nonlinear systems, mismatches...The Rydberg atom-based receiver, as a novel type of antenna, demonstrates broad application prospects in the field of microwave communications. However, since Rydberg atomic receivers are nonlinear systems, mismatches between the parameters of the received amplitude modulation(AM) signals and the system's linear workspace and demodulation operating points can cause severe distortion in the demodulated signals. To address this, the article proposes a method for determining the operational parameters based on the mean square error(MSE) and total harmonic distortion(THD) assessments and presents strategies for optimizing the system's operational parameters focusing on linear response characteristics(LRC) and linear dynamic range(LDR). Specifically, we employ a method that minimizes the MSE to define the system's linear workspace, thereby ensuring the system has a good LRC while maximizing the LDR. To ensure that the signal always operates within the linear workspace, an appropriate carrier amplitude is set as the demodulation operating point. By calculating the THD at different operating points, the LRC performance within different regions of the linear workspace is evaluated, and corresponding optimization strategies based on the range of signal strengths are proposed. Moreover, to more accurately restore the baseband signal, we establish a mapping relationship between the carrier Rabi frequency and the transmitted power of the probe light, and optimize the slope of the linear demodulation function to reduce the MSE to less than 0.8×10^(-4). Finally, based on these methods for determining the operational parameters, we explore the effects of different laser Rabi frequencies on the system performance, and provide optimization recommendations. This research provides robust support for the design of high-performance Rydberg atom-based AM receivers.展开更多
In this paper,an interference cancellation based neural receiver for superimposed pilot(SIP)in multi-layer transmission is proposed,where the data and pilot are non-orthogonally superimposed in the same time-frequency...In this paper,an interference cancellation based neural receiver for superimposed pilot(SIP)in multi-layer transmission is proposed,where the data and pilot are non-orthogonally superimposed in the same time-frequency resource.Specifically,to deal with the intra-layer and inter-layer interference of SIP under multi-layer transmission,the interference cancellation with superimposed symbol aided channel estimation is leveraged in the neural receiver,accompanied by the pre-design of pilot code-division orthogonal mechanism at transmitter.In addition,to address the complexity issue for inter-vendor collaboration and the generalization problem in practical deployments,respectively,this paper also provides a fixed SIP(F-SIP)design based on constant pilot power ratio and scalable mechanisms for different modulation and coding schemes(MCSs)and transmission layers.Simulation results demonstrate the superiority of the proposed schemes on the performance of block error rate and throughput compared with existing counterparts.展开更多
In this paper,we investigate a distributed multi-input multi-output and orthogonal frequency division multiplexing(MIMO-OFDM) dual-functional radar-communication(DFRC) system,which enables simultaneous communication a...In this paper,we investigate a distributed multi-input multi-output and orthogonal frequency division multiplexing(MIMO-OFDM) dual-functional radar-communication(DFRC) system,which enables simultaneous communication and sensing in different subcarrier sets.To obtain the best tradeoff between communication and sensing performance,we first derive Cramer-Rao Bound(CRB) of targets in detection area,and then maximize the transmission rate by jointly optimizing the power/subcarriers allocation and the selection of radar receivers under the constraints of detection performance and total transmit power.To tackle the non-convex mixed integer programming problem,we decompose the original problem into a semidefinite programming(SDP) problem and a convex quadratic integer problem and solve them iteratively.The numerical results demonstrate the effectiveness of our proposed algorithm,as well as the performance improvement brought by optimizing radar receivers selection.展开更多
As a novel signaling technology,the power splitting receiver(PSR)simultaneously employs both the coherent and non-coherent signal processing.In order to improve its communication performance,an intelligent reflecting ...As a novel signaling technology,the power splitting receiver(PSR)simultaneously employs both the coherent and non-coherent signal processing.In order to improve its communication performance,an intelligent reflecting surface(IRS)is introduced into its signal propagation path.Consequently,an IRSaided PSR is concerned for a point-to-point(P2P)data link,where both the single-antenna and multiantenna deployments on the receiver are discussed.We aim at maximizing the capacity of the concerned P2P data-link by jointly optimizing the passive beamforming of IRS and the splitting ratio of PSR,either in single-antenna or multi-antenna case.However,owing to the coupling of multiple variables,the optimization problems are non-convex and challenging,especially in the later multi-antenna case.The proposed alternating-approximating algorithm(A-A),aided by semi-definite relaxation(SDR)and successive convex approximation(SCA)methods,etc.,successfully overcomes these challenges.We compare the IRS-aided PSR system that optimized by our proposed algorithm to the systems without IRS or PSR,and the systems without joint optimization.The simulation results show that our proposal has a better performance.展开更多
Based on the observational data from 60 short-period stations deployed in the Jishishan M6.2 earthquake epicenter and adjacent regions(Gansu Province,2023),this study inverted the near-surface S-wave velocity structur...Based on the observational data from 60 short-period stations deployed in the Jishishan M6.2 earthquake epicenter and adjacent regions(Gansu Province,2023),this study inverted the near-surface S-wave velocity structure through teleseismic receiver function analysis by using the amplitude of direct P-wave.The results reveal that the epicentral area(Liugou Township and surroundings)exhibits markedly low S-wave velocities of 400-600 m/s,with a mean value of(500±50)m/s.In contrast,intermountain basins-Guanting Basin and Dahejia Basin-demonstrate significantly elevated velocities,exceeding the epicentral zone by 100-300 m/s,with values concentrated at 600-900 m/s.Notably,localized areas such as Jintian Village and Caotan Village maintain stable S-wave velocities of(700±30)m/s.The western margin tectonic belt of Jishishan displays distinctive velocity differentiation:A pronounced velocity gradient zone along the 35.8°N latitude boundary separates northern areas(<550 m/s)from southern regions(>750 m/s).These findings demonstrate significant spatial heterogeneity in shallow S-wave velocity structures,primarily controlled by three factors:(1)topographic-geomorphic units,(2)stratigraphic lithological contrasts,and(3)anthropogenic modifications.The persistent low-velocity anomalies(<600 m/s)in the epicentral zone and northern Yellow River T2 terrace likely correlate with Quaternary unconsolidated sediments,enhanced groundwater circulation,and bedrock weathering.These results provide critical geophysical constraints for understanding both the seismogenic environment of the Jishishan earthquake and its damage distribution patterns.Furthermore,they establish a foundational framework for regional seismic intensity evaluation,site amplification analysis,and secondary hazard risk assessment.展开更多
The Cathaysia block in Southeast China has undergone complex compression,collision and tectonic evolution processes,which have led to the formation of rich granites and polymetallic ores.However,its history of crustal...The Cathaysia block in Southeast China has undergone complex compression,collision and tectonic evolution processes,which have led to the formation of rich granites and polymetallic ores.However,its history of crustal evolution and metallogenic mechanisms remain unclear.To explore the deep geodynamic processes in the central Cathaysia block,we deployed a dense broadband seismic array with a station interval of~5 km from July 2017 to August 2020.This seismic array,composed of 80 portable stations,traverses the Nanling and Wuyi metallogenic belts and crosses four deep faults.We employ the teleseismic receiver-function method to estimate the crustal thickness and vP/vS ratio beneath the seismic array.Our results reveal a distinct negative correlation between the crustal thickness and the vP/vS ratio within the crust,which might be closely associated with crustal deformation.The average crustal thickness is~30 km,indicating that the crust was thinned under an extensional environment.However,the crust beneath the Wuyi belt is slightly thicker and has a lower vP/vS ratio than its adjacent areas,which may reflect thickening of the upper crust due to its ductility and lithospheric delamination.展开更多
A Receiver Operating Characteristic(ROC)analysis of a power is important and useful in clinical trials.A Classical Conditional Power(CCP)is a probability of a classical rejection region given values of true treatment ...A Receiver Operating Characteristic(ROC)analysis of a power is important and useful in clinical trials.A Classical Conditional Power(CCP)is a probability of a classical rejection region given values of true treatment effect and interim result.For hypotheses and reversed hypotheses under normal models,we obtain analytical expressions of the ROC curves of the CCP,find optimal ROC curves of the CCP,investigate the superiority of the ROC curves of the CCP,calculate critical values of the False Positive Rate(FPR),True Positive Rate(TPR),and cutoff of the optimal CCP,and give go/no go decisions at the interim of the optimal CCP.In addition,extensive numerical experiments are carried out to exemplify our theoretical results.Finally,a real data example is performed to illustrate the go/no go decisions of the optimal CCP.展开更多
Increasing the number of atoms that interact with microwave fields represents a promising strategy for enhancing the sensitivity of Rydberg atom-based superheterodyne receivers.Nevertheless,the practical implementatio...Increasing the number of atoms that interact with microwave fields represents a promising strategy for enhancing the sensitivity of Rydberg atom-based superheterodyne receivers.Nevertheless,the practical implementation of this approach is impeded by adverse effects such as excitation saturation of Rydberg atoms and power broadening.Here,we demonstrate enhanced microwave field measurements based on two specific velocity groups of atoms,simultaneously addressed by dual-channel probe beams in a Sagnac loop interferometer.The application of resonance detuning in two-photon excitation enables selective addressing of atoms moving along the beam direction,thereby significantly mitigating atomic transit noise.At 7.97 GHz,our method yields a 3 dB improvement in signal-to-noise ratio(SNR),achieving a sensitivity of 10.7 nV·cm^(−1)·Hz^(−1/2).This approach offers a viable pathway to further improve the sensitivity of Rydberg atom-based microwave electrometers.展开更多
Knowing the precise relationship between fuel loading and reactivity is essential for guiding reactor criticality extrapolation and online refueling in molten salt reactors(MSRs).This study aims to explore and explain...Knowing the precise relationship between fuel loading and reactivity is essential for guiding reactor criticality extrapolation and online refueling in molten salt reactors(MSRs).This study aims to explore and explain the linear relationship between reactivity and the reciprocal of uranium concentration in thermal-spectrum MSRs.By applying neutron balance theory,we analyzed the neutron absorption cross sections of various nuclides in single-lattice models with varying fuel concentrations.Our findings reveal a simple linear correlation between reactivity and the reciprocal of uranium concentration,which can be explained from the perspective of nuclear reaction cross sections that adhere to the 1/v law in the thermal neutron spectrum.Furthermore,we identified that the neutron absorption single-group cross sections of structural materials and carrier salts exhibit an approximately linear relationship with the fission single-group cross section of ^(235) U;similarly,the reciprocal of ^(235)U’s fission cross section exhibits an approximately linear relationship with uranium concentration.This linear relationship deviates as the volume fraction of molten salt increases,due to a greater proportion of neutrons being captured in the resonance energy spectrum.However,it remains valid for molten salt volume fractions up to 25%and demonstrates broad applicability in the physical design and operation of thermal molten salt reactors.展开更多
The electrochemical oxidation of biomass-derived platform molecule 5-hydroxymethylfurfural(HMF)represents a crucial pathway for green transformation into high-value chemicals,yet its reaction pathway selectivity,effic...The electrochemical oxidation of biomass-derived platform molecule 5-hydroxymethylfurfural(HMF)represents a crucial pathway for green transformation into high-value chemicals,yet its reaction pathway selectivity,efficiency,and catalyst stability are strongly dependent on the electrolyte pH environment.Under alkaline conditions,high OH−concentration facilitates preferential aldehyde group oxidation and efficient deprotonation,enabling highly efficient synthesis of 2,5-furandicarboxylic acid,but simultaneously induces HMF self-degradation and complicates product separation.As pH decreases,the reaction mechanism shifts toward enhanced hydroxymethyl oxidation,leading to intermediate accumulation(such as 5-hydroxymethyl-2-furancarboxylic acid,2,5-diformylfuran,and 5-formyl-2-furancarboxylic acid)with challenging selectivity control and significantly slowed reaction kinetics.This review comprehensively examines the systematic differences in HMF oxidation pathways and surface catalytic mechanisms across the full pH range from alkaline to acidic conditions.Addressing the distinct reaction characteristics and core challenges in alkaline,near-neutral,and acidic media,we systematically evaluate design strategies for high-efficiency electrocatalysts and explore reactor design aspects.Future research should focus on process integration(with tailored reactor design)for energy consumption reduction in alkaline systems,targeted synthesis of diverse oxidation products in near-neutral systems,and innovative catalyst development for acidic systems,thereby advancing the efficiency,selectivity,and practical application of HMF electrooxidation technologies across the entire pH spectrum through synergistic optimization of catalyst,reactor,and process.展开更多
Nuclear reactor coolant pumps require frequent maintenance to ensure operational safety.One critical aspect of this maintenance is verifying the integrity of the mechanical sealing system.Due to the lack of an evaluat...Nuclear reactor coolant pumps require frequent maintenance to ensure operational safety.One critical aspect of this maintenance is verifying the integrity of the mechanical sealing system.Due to the lack of an evaluation criteria and an incomplete understanding of how end-face defects lead to failure,defective mechanical seals are often replaced empirically,which not only contributes to economic losses but also poses risks to reactor safety.To reveal the mechanism by which surface defects affect sealing performance,this study proposes a classification method for end-face defects based on the analysis of approximately one hundred used mechanical seals.A defect characterization model was established by extracting key features of the observed defects.The influence of these defects on sealing performance was analyzed using a liquid-thermal-solid coupling model.Changes in sealing gap,leakage rates,and film stiffness with respect to defect size,location,and other characteristics are discussed.This work contributes to a deeper understanding of defect failure mechanisms.These results can serve as a reference for evaluating defective seals.展开更多
Molten salt reactors,being the only reactor type among Generation Ⅳ advanced nuclear reactors that utilize liquid fuels,offer inherent safety,high-temperature,and low-pressure operation,as well as the capability for ...Molten salt reactors,being the only reactor type among Generation Ⅳ advanced nuclear reactors that utilize liquid fuels,offer inherent safety,high-temperature,and low-pressure operation,as well as the capability for online fuel reprocessing.However,the fuel-salt flow results in the decay of delayed neutron precursors(DNPs)outside the core,causing fluctuations in the effective delayed neutron fraction and consequently impacting the reactor reactivity.Particularly in accident scenarios—such as a combined pump shutdown and the inability to rapidly scram the reactor—the sole reliance on negative temperature feedback may cause a significant increase in core temperature,posing a threat to reactor safety.To address these problems,this paper introduces an innovative design for a passive fluid-driven suspended control rod(SCR)to dynamically compensate for reactivity fluctuations caused by DNPs flowing with the fuel.The control rod operates passively by leveraging the combined effects of gravity,buoyancy,and fluid dynamic forces,thereby eliminating the need for an external drive mechanism and enabling direct integration within the active region of the core.Using a 150 MWt thorium-based molten salt reactor as the reference design,we develop a mathematical model to systematically analyze the effects of key parameters—including the geometric dimensions and density of the SCR—on its performance.We examine its motion characteristics under different core flow conditions and assess its feasibility for the dynamic compensation of reactivity changes caused by fuel flow.The results of this study demonstrate that the SCR can effectively counteract reactivity fluctuations induced by fuel flow within molten salt reactors.A sensitivity analysis reveals that the SCR’s average density exerts a profound impact on its start-up flow threshold,channel flow rate,resistance to fuel density fluctuations,and response characteristics.This underscores the critical need to optimize this parameter.Moreover,by judiciously selecting the SCR’s length,number of deployed units,and the placement we can achieve the necessary reactivity control while maintaining a favorable balance between neutron economy and heat transfer performance.Ultimately,this paper provides an innovative solution for the passive reactivity control in molten salt reactors,offering significant potential for practical engineering applications.展开更多
The synthesis of propylene carbonate(PC)from CO_(2) and propylene oxide(PO)is a typical gas-liquid biphasic system,where gas-liquid mass transfer efficiency significantly influences CO_(2) cycloaddition reactions.Here...The synthesis of propylene carbonate(PC)from CO_(2) and propylene oxide(PO)is a typical gas-liquid biphasic system,where gas-liquid mass transfer efficiency significantly influences CO_(2) cycloaddition reactions.Here,we proposed a microchannel reaction system for the CO_(2) cycloaddition reaction catalyzed by ionic liquid within an aqueous environment.The effect of liquid flow rate,temperature and residence time on gas-liquid flow pattern,catalytic performance and mass transfer were systematically investigated.The results revealed that the PC generation rate reached 560.11 mmol·ml^(−1)·h^(−1)at a 50 cm of flow distance under reaction conditions of 105℃,2.5 MPa,QG=176 ml·min^(−1) and QL=0.3 ml·min^(−1).Variations in mass transfer rate and reaction rate at different flow distances were experimentally studied.The reaction efficiency gradually decreased with increasing flow distance,which were attributed to the reduction of mass transfer caused by decreasing bubble velocity.Optimizing bubble velocity at an appropriate position enhanced reaction efficiency by improving mass transfer,achieving a 97.7%PC yield within 2.85 min.Furthermore,a kinetic model coupling intrinsic kinetics with gas-liquid mass transfer was developed for CO_(2) cycloaddition reaction.The kinetic model was applied to predict PC reaction rates in microchannel reactors at various temperatures and liquid flow rates,achieving an average relative error of 9.6%.展开更多
Laser-induced aerosols,predominantly submicron in size,pose significant environmental and health risks during the decommissioning of nuclear reactors.This study experimentally investigated the removal of laser-generat...Laser-induced aerosols,predominantly submicron in size,pose significant environmental and health risks during the decommissioning of nuclear reactors.This study experimentally investigated the removal of laser-generated aerosol particles using a water spray system integrated with an innovative system for pre-injecting electrically charged mist in our facility.To simulate aerosol generation in reactor decommissioning,a high-power laser was used to irradiate various materials(including stainless steel,carbon steel,and concrete),generating aerosol particles that were agglomerated with injected water mist and subsequently scavenged by water spray.Experimental results demonstrate enhanced aerosol removal via aerosol-mist agglomeration,with charged mist significantly improving particle capture by increasing wettability and size.The average improvements for the stainless steel,carbon steel,and concrete were 40%,44%,and 21%,respectively.The results of experiments using charged mist with different polarities(both positive and negative)and different surface coatings reveal that the dominant polarity of aerosols varies with the irradiated materials,influenced by their crystal structure and electron emission properties.Notably,surface coatings such as ZrO_(2)and CeO_(2)were found to possibly alter aerosol charging characteristics,thereby affecting aerosol removal efficiency with charged mist configurations.The innovative aerosol-mist agglomeration approach shows promise in mitigating radiation exposure,ensuring environmental safety,and reducing contaminated water during reactor dismantling.This study contributes critical knowledge for the development of advanced aerosol management strategies for nuclear reactor decommissioning.The understanding obtained in this work is also expected to be useful for various environmental and chemical engineering applications such as gas decontamination,air purification,and pollution control.展开更多
One of the main issues in designing optimum tapered cascades for uranium enrichment for annual fuel production in a power reactor is whether to employ large(fat)or small(thin)cascades.What will be the permissible and ...One of the main issues in designing optimum tapered cascades for uranium enrichment for annual fuel production in a power reactor is whether to employ large(fat)or small(thin)cascades.What will be the permissible and optimal ranges of the number of machines that can be used in a cascade?For the first time,the permissible and optimal ranges of the number of gas centrifuges that can be utilized in a cascade were investigated using two types of centrifuges,and the performance of small and large tapered cascades was discussed.The particle swarm optimization algorithm(PSO)has been used to optimize tapered cascades.The results show:(1)For the first centrifuge,41 cascades(91≤n≤4897)and for the second centrifuge,49 cascades(18≤n≤3839)with small and large sizes can be used in enrichment facilities,and the best cascade for them has 530(with 23 stages)and 39(with 7 stages)centrifuges,respectively.(2)For both centrifuges,when 600≤n(number of centrifuges=n),the large cascade performance changes are relatively insignificant.(3)For both types of gas centrifuges,the annual los s of separation power in enrichment facilities is approximately 1.25%-4.82%of the total separation work required.展开更多
基金Project supported by the National Natural Science Foundation of China(Grant Nos.62331024 and 62571549)the National Key Research and Development Program of China(Grant No.2022YFB2802804)。
文摘Rydberg-atom-based superheterodyne receivers integrate self-calibration,high sensitivity,a wide operational frequency range,and phase/frequency resolved detection capabilities,demonstrating broad application prospects as nextgeneration microwave receivers.Linear gain and linear dynamic range(LDR)are critical metrics for assessing receiver sensitivity and demodulation fidelity,respectively.We numerically solve the four-level master equation and then employ particle swarm optimization(PSO)algorithm to co-optimize linear gain and LDR in atomic superheterodyne receivers based on balanced homodyne detection.Further,we systematically account for dominant dephasing mechanisms in the simulation,encompassing spontaneous decay,transit dephasing,collision dephasing,laser linewidth dephasing,and Doppler averaging.Homodyne readout utilizes both the real and imaginary parts of polarizability for sensing.In the case of the photon shot noise limit,its signal-to-noise ratio(SNR)expression resembles that of direct optical-intensity readout.However,the inherent coherent subtraction operation in homodyne detection significantly suppresses common-mode noise,while appropriately increasing the reference beam power enhances the gain in practical experiments.Indeed,this co-optimization problem,characterized by a high-dimensional variable space,two objectives,and non-convexity,is well-suited for solution by PSO.In addition,probe and coupling detuning contribute equivalently to polarizability and compensate for each other owing to Doppler averaging,thereby reducing the optimization variable space by one.By adopting a product form of linear gain and LDR as the fitness function,the PSO achieves rapid convergence.Here,the effectiveness of the PSO results is verified via the total harmonic distortion(THD).The relative error-based LDR calculation method we proposed efficiently measures receiver response linearity with consuming fewer computational resources.This research is expected to offer valuable insights into enhancing the performance of Rydberg-atom-based superheterodyne receivers.
基金JSPS KAKENHI Grant Number16H06286 supports global GNSS ionospheric maps (TEC,ROTI,and detrended TEC maps) developed by the Institute for SpaceEarth Environmental Research (ISEE) of Nagoya Universitysupport of the 2024 JASSO Follow-up Research Fellowship Program for a 90-day visiting research at the Institute for Space-Earth Environmental Research (ISEE),Nagoya University+3 种基金the support received from Telkom University under the“Skema Penelitian Terapan Periode I Tahun Anggaran 2024”the Memorandum of Understanding for Research Collaboration on Regional Ionospheric Observation (No:092/SAM3/TE-DEK/2021)the National Institute of Information and Communications Technology (NICT) International Exchange Program 2024-2025(No.2024-007)support for a one-year visiting research at Hokkaido University
文摘This paper highlights the crucial role of Indonesia’s GNSS receiver network in advancing Equatorial Plasma Bubble(EPB)studies in Southeast and East Asia,as ionospheric irregularities within EPB can disrupt GNSS signals and degrade positioning accuracy.Managed by the Indonesian Geospatial Information Agency(BIG),the Indonesia Continuously Operating Reference Station(Ina-CORS)network comprises over 300 GNSS receivers spanning equatorial to southern low-latitude regions.Ina-CORS is uniquely situated to monitor EPB generation,zonal drift,and dissipation across Southeast Asia.We provide a practical tool for EPB research,by sharing two-dimensional rate of Total Electron Content(TEC)change index(ROTI)derived from this network.We generate ROTI maps with a 10-minute resolution,and samples from May 2024 are publicly available for further scientific research.Two preliminary findings from the ROTI maps of Ina-CORS are noteworthy.First,the Ina-CORS ROTI maps reveal that the irregularities within a broader EPB structure persist longer,increasing the potential for these irregularities to migrate farther eastward.Second,we demonstrate that combined ROTI maps from Ina-CORS and GNSS receivers in East Asia and Australia can be used to monitor the development of ionospheric irregularities in Southeast and East Asia.We have demonstrated the combined ROTI maps to capture the development of ionospheric irregularities in the Southeast/East Asian sector during the G5 Geomagnetic Storm on May 11,2024.We observed simultaneous ionospheric irregularities in Japan and Australia,respectively propagating northwestward and southwestward,before midnight,whereas Southeast Asia’s equatorial and low-latitude regions exhibited irregularities post-midnight.By sharing ROTI maps from Indonesia and integrating them with regional GNSS networks,researchers can conduct comprehensive EPB studies,enhancing the understanding of EPB behavior across Southeast and East Asia and contributing significantly to ionospheric research.
文摘The Red Sea-Gulf of Suez-Cairo-Alexandria Clysmic-Trend in northern Egypt is the main earthquake zone in the country,with a moderate-to-high seismic hazard and a history of significant earthquakes caused by rifting and active faulting.To improve our understanding of the tectonic and seismic processes in this area,more comprehensive imaging of the crustal structure is required.This can be achieved by increasing the number of receiver functions(RFs)recorded by the seismic stations in northern Egypt and the southeastern Mediterranean.Data handling and processing should also be automated to increase process efficiency.In this study,we developed a capsule neural network for automated selection of RFs.The model was trained on a dataset containing RFs(both selected and unselected)from five broadband stations in northern Egypt.Stations SLM,SIWA,KOT,NBNS,and NKL are located in the unstable shelf region of Egypt,where limited knowledge of the deep crustal structure is available.The proposed capsule neural network achieved an average precision of 80%on the test set.The automated selection of RFs using a capsule neural network has the potential to significantly improve the efficiency and accuracy of RF analysis,as demonstrated by the stacking test.This could lead to a better understanding of crustal structure and tectonic processes in northern Egypt and the southeastern Mediterranean.
基金supported by National Key R&D Program of China No.2022YFB2803401.
文摘In DSP-based SerDes application,it is essential for AFE to implement a pre-ADC equalization to provide a better sig-nal for ADC and DSP.To meet the various equalization requirements of different channel and transmitter configurations,this paper presents a 112 Gbps DSP-Based PAM4 SerDes receiver with a wide band equalization tuning AFE.The AFE is realized by implementing source degeneration transconductance,feedforward high-pass branch and inductive feedback peaking TIA.The AFE offers a flexible equalization gain tuning of up to 17.5 dB at Nyquist frequency without affecting the DC gain.With the pro-posed AFE,the receiver demonstrates eye opening after digital FIR equalization and achieves 6×10^(-9) BER with a 29.6 dB inser-tion loss channel.
基金funding from European Union(MCIN/AEI/10.13039/501100011033/FEDER)(Nos.PID2022-138485OB-I00 and CNS2022-135383)European Space Agency(RT-WMIS)(No.4000137762/22/NL/GLC/ov)funding support from the China Scholarship Council(No.202006020025)。
文摘The geodetic detrending(GD)methodology was introduced in the past decade and has opened the door to the global monitoring of ionospheric scintillation using global navigation satellite system(GNSS)receivers.The performance of GD has been demonstrated in geodetic receivers.However,extending scintillation monitoring to low-cost commercial receivers remains a challenge.Low-cost devices could serve as valuable complements to specialised and much more expensive scintillation monitoring receivers.In this paper,first,a feasibility study was conducted using the GD technique,demonstrating that the scintillation indices derived from the observations of two lowcost receivers(Septentrio Mosaic X5 and UBLOX ZED-F9P)have a resolution similar to that achieved by geodetic receiver models,whose price is one order of magnitude higher.Second,measurements of GNSS signals at different frequencies from the Galileo and global positioning system(GPS)satellites were analysed in a specific experiment over six days of null scintillation.Next,the noise level in the scintillation parameters derived from the experiment was evaluated,which shows that for low-cost receivers,the minimum scintillation detection threshold increases only negligibly compared to geodetic-grade receivers.Moreover,the geometry-free(GF)combination of L1 with a second signal of different frequency was investigated as an alternative to detrending GNSS signals.Finally,for determining the ionospheric fluctuations produced by scintillation,the limitations of using the GF combination versus the uncombined measurements were highlighted.It is concluded that the minimum resolution of scintillation indices derived from low-cost receiver measurements makes it possible to distinguish values associated with periods of scintillation activity from those produced by residual noise from mismodeling.For both geodetic and low-cost receivers,the scintillation detection threshold obtained with uncombined carrier-phase measurements is smaller than that achieved with the classic GF combination.
基金Project supported by the National Natural Science Foundation of China (Grant No. U22B2095)the Civil Aerospace Technology Research Project (Grant No. D010103)。
文摘The Rydberg atom-based receiver, as a novel type of antenna, demonstrates broad application prospects in the field of microwave communications. However, since Rydberg atomic receivers are nonlinear systems, mismatches between the parameters of the received amplitude modulation(AM) signals and the system's linear workspace and demodulation operating points can cause severe distortion in the demodulated signals. To address this, the article proposes a method for determining the operational parameters based on the mean square error(MSE) and total harmonic distortion(THD) assessments and presents strategies for optimizing the system's operational parameters focusing on linear response characteristics(LRC) and linear dynamic range(LDR). Specifically, we employ a method that minimizes the MSE to define the system's linear workspace, thereby ensuring the system has a good LRC while maximizing the LDR. To ensure that the signal always operates within the linear workspace, an appropriate carrier amplitude is set as the demodulation operating point. By calculating the THD at different operating points, the LRC performance within different regions of the linear workspace is evaluated, and corresponding optimization strategies based on the range of signal strengths are proposed. Moreover, to more accurately restore the baseband signal, we establish a mapping relationship between the carrier Rabi frequency and the transmitted power of the probe light, and optimize the slope of the linear demodulation function to reduce the MSE to less than 0.8×10^(-4). Finally, based on these methods for determining the operational parameters, we explore the effects of different laser Rabi frequencies on the system performance, and provide optimization recommendations. This research provides robust support for the design of high-performance Rydberg atom-based AM receivers.
文摘In this paper,an interference cancellation based neural receiver for superimposed pilot(SIP)in multi-layer transmission is proposed,where the data and pilot are non-orthogonally superimposed in the same time-frequency resource.Specifically,to deal with the intra-layer and inter-layer interference of SIP under multi-layer transmission,the interference cancellation with superimposed symbol aided channel estimation is leveraged in the neural receiver,accompanied by the pre-design of pilot code-division orthogonal mechanism at transmitter.In addition,to address the complexity issue for inter-vendor collaboration and the generalization problem in practical deployments,respectively,this paper also provides a fixed SIP(F-SIP)design based on constant pilot power ratio and scalable mechanisms for different modulation and coding schemes(MCSs)and transmission layers.Simulation results demonstrate the superiority of the proposed schemes on the performance of block error rate and throughput compared with existing counterparts.
基金supported by the National Key R&D Program of China (2023YFB2905605)the National Natural Science Foundation of China (62072229)。
文摘In this paper,we investigate a distributed multi-input multi-output and orthogonal frequency division multiplexing(MIMO-OFDM) dual-functional radar-communication(DFRC) system,which enables simultaneous communication and sensing in different subcarrier sets.To obtain the best tradeoff between communication and sensing performance,we first derive Cramer-Rao Bound(CRB) of targets in detection area,and then maximize the transmission rate by jointly optimizing the power/subcarriers allocation and the selection of radar receivers under the constraints of detection performance and total transmit power.To tackle the non-convex mixed integer programming problem,we decompose the original problem into a semidefinite programming(SDP) problem and a convex quadratic integer problem and solve them iteratively.The numerical results demonstrate the effectiveness of our proposed algorithm,as well as the performance improvement brought by optimizing radar receivers selection.
基金supported by National Key R&D Program of China with Grant number 2019YFB1803400in part by Sichuan Science and Technology Program under Grant 2024NSFSC0472。
文摘As a novel signaling technology,the power splitting receiver(PSR)simultaneously employs both the coherent and non-coherent signal processing.In order to improve its communication performance,an intelligent reflecting surface(IRS)is introduced into its signal propagation path.Consequently,an IRSaided PSR is concerned for a point-to-point(P2P)data link,where both the single-antenna and multiantenna deployments on the receiver are discussed.We aim at maximizing the capacity of the concerned P2P data-link by jointly optimizing the passive beamforming of IRS and the splitting ratio of PSR,either in single-antenna or multi-antenna case.However,owing to the coupling of multiple variables,the optimization problems are non-convex and challenging,especially in the later multi-antenna case.The proposed alternating-approximating algorithm(A-A),aided by semi-definite relaxation(SDR)and successive convex approximation(SCA)methods,etc.,successfully overcomes these challenges.We compare the IRS-aided PSR system that optimized by our proposed algorithm to the systems without IRS or PSR,and the systems without joint optimization.The simulation results show that our proposal has a better performance.
基金project is supported in part by Broadband Seismic 3D Array Detection(PhaseⅠ),Deep Earth Probe and Mineral Resources Exploration-National Science and Technology Major Project(Grant No.2024ZD1000300)National Natural Science Foundation of China(42204061)Gansu Jishishan 6.2 magnitude earthquake scientific investigation(DQJB23Y45)program。
文摘Based on the observational data from 60 short-period stations deployed in the Jishishan M6.2 earthquake epicenter and adjacent regions(Gansu Province,2023),this study inverted the near-surface S-wave velocity structure through teleseismic receiver function analysis by using the amplitude of direct P-wave.The results reveal that the epicentral area(Liugou Township and surroundings)exhibits markedly low S-wave velocities of 400-600 m/s,with a mean value of(500±50)m/s.In contrast,intermountain basins-Guanting Basin and Dahejia Basin-demonstrate significantly elevated velocities,exceeding the epicentral zone by 100-300 m/s,with values concentrated at 600-900 m/s.Notably,localized areas such as Jintian Village and Caotan Village maintain stable S-wave velocities of(700±30)m/s.The western margin tectonic belt of Jishishan displays distinctive velocity differentiation:A pronounced velocity gradient zone along the 35.8°N latitude boundary separates northern areas(<550 m/s)from southern regions(>750 m/s).These findings demonstrate significant spatial heterogeneity in shallow S-wave velocity structures,primarily controlled by three factors:(1)topographic-geomorphic units,(2)stratigraphic lithological contrasts,and(3)anthropogenic modifications.The persistent low-velocity anomalies(<600 m/s)in the epicentral zone and northern Yellow River T2 terrace likely correlate with Quaternary unconsolidated sediments,enhanced groundwater circulation,and bedrock weathering.These results provide critical geophysical constraints for understanding both the seismogenic environment of the Jishishan earthquake and its damage distribution patterns.Furthermore,they establish a foundational framework for regional seismic intensity evaluation,site amplification analysis,and secondary hazard risk assessment.
基金co-supported by the National Key Research and Development Program of China(No.2016YFC0600201)the National Natural Science Foundation of China(Nos.41974060 and 41630320)the Fundamental Research Funds for the Central Universities(No.2-9-2019-037).
文摘The Cathaysia block in Southeast China has undergone complex compression,collision and tectonic evolution processes,which have led to the formation of rich granites and polymetallic ores.However,its history of crustal evolution and metallogenic mechanisms remain unclear.To explore the deep geodynamic processes in the central Cathaysia block,we deployed a dense broadband seismic array with a station interval of~5 km from July 2017 to August 2020.This seismic array,composed of 80 portable stations,traverses the Nanling and Wuyi metallogenic belts and crosses four deep faults.We employ the teleseismic receiver-function method to estimate the crustal thickness and vP/vS ratio beneath the seismic array.Our results reveal a distinct negative correlation between the crustal thickness and the vP/vS ratio within the crust,which might be closely associated with crustal deformation.The average crustal thickness is~30 km,indicating that the crust was thinned under an extensional environment.However,the crust beneath the Wuyi belt is slightly thicker and has a lower vP/vS ratio than its adjacent areas,which may reflect thickening of the upper crust due to its ductility and lithospheric delamination.
基金supported by the National Social Science Fund of China(Grand No.21XTJ001).
文摘A Receiver Operating Characteristic(ROC)analysis of a power is important and useful in clinical trials.A Classical Conditional Power(CCP)is a probability of a classical rejection region given values of true treatment effect and interim result.For hypotheses and reversed hypotheses under normal models,we obtain analytical expressions of the ROC curves of the CCP,find optimal ROC curves of the CCP,investigate the superiority of the ROC curves of the CCP,calculate critical values of the False Positive Rate(FPR),True Positive Rate(TPR),and cutoff of the optimal CCP,and give go/no go decisions at the interim of the optimal CCP.In addition,extensive numerical experiments are carried out to exemplify our theoretical results.Finally,a real data example is performed to illustrate the go/no go decisions of the optimal CCP.
基金supported by the National Key R&D Program of China(Grant No.2022YFA1404003)the National Natural Science Foundation of China(Grant Nos.T2495252,12104279,and 123B2062)+2 种基金the Innovation Program for Quantum Science and Technology(Grant No.2021ZD0302100)the Fund for Shanxi“1331 Project”Key Subjects Constructionthe Bairen Project of Shanxi Province。
文摘Increasing the number of atoms that interact with microwave fields represents a promising strategy for enhancing the sensitivity of Rydberg atom-based superheterodyne receivers.Nevertheless,the practical implementation of this approach is impeded by adverse effects such as excitation saturation of Rydberg atoms and power broadening.Here,we demonstrate enhanced microwave field measurements based on two specific velocity groups of atoms,simultaneously addressed by dual-channel probe beams in a Sagnac loop interferometer.The application of resonance detuning in two-photon excitation enables selective addressing of atoms moving along the beam direction,thereby significantly mitigating atomic transit noise.At 7.97 GHz,our method yields a 3 dB improvement in signal-to-noise ratio(SNR),achieving a sensitivity of 10.7 nV·cm^(−1)·Hz^(−1/2).This approach offers a viable pathway to further improve the sensitivity of Rydberg atom-based microwave electrometers.
基金supported by the Youth Innovation Promotion Association of the Chinese Academy of Sciences(No.2020261)the Strategic Priority Research Program of the Chinese Academy of Sciences(No.XDA02010000)the Young Potential Program of the Shanghai Institute of Applied Physics,Chinese Academy of Sciences(No.SINAP-YXJH-202412)。
文摘Knowing the precise relationship between fuel loading and reactivity is essential for guiding reactor criticality extrapolation and online refueling in molten salt reactors(MSRs).This study aims to explore and explain the linear relationship between reactivity and the reciprocal of uranium concentration in thermal-spectrum MSRs.By applying neutron balance theory,we analyzed the neutron absorption cross sections of various nuclides in single-lattice models with varying fuel concentrations.Our findings reveal a simple linear correlation between reactivity and the reciprocal of uranium concentration,which can be explained from the perspective of nuclear reaction cross sections that adhere to the 1/v law in the thermal neutron spectrum.Furthermore,we identified that the neutron absorption single-group cross sections of structural materials and carrier salts exhibit an approximately linear relationship with the fission single-group cross section of ^(235) U;similarly,the reciprocal of ^(235)U’s fission cross section exhibits an approximately linear relationship with uranium concentration.This linear relationship deviates as the volume fraction of molten salt increases,due to a greater proportion of neutrons being captured in the resonance energy spectrum.However,it remains valid for molten salt volume fractions up to 25%and demonstrates broad applicability in the physical design and operation of thermal molten salt reactors.
基金supported by the National Key R&D Program of China(2023YFA1507400)the National Natural Science Foundation of China(Grant No.22325805,22441010,22408203)+2 种基金Beijing Natural Science Foundation(Grant No.JQ22003)the Haihe Laboratory of Sustainable Chemical Transformations(24HHWCSS00007)Tsinghua University Dushi Program,and Sinopec Group(PR20232572).
文摘The electrochemical oxidation of biomass-derived platform molecule 5-hydroxymethylfurfural(HMF)represents a crucial pathway for green transformation into high-value chemicals,yet its reaction pathway selectivity,efficiency,and catalyst stability are strongly dependent on the electrolyte pH environment.Under alkaline conditions,high OH−concentration facilitates preferential aldehyde group oxidation and efficient deprotonation,enabling highly efficient synthesis of 2,5-furandicarboxylic acid,but simultaneously induces HMF self-degradation and complicates product separation.As pH decreases,the reaction mechanism shifts toward enhanced hydroxymethyl oxidation,leading to intermediate accumulation(such as 5-hydroxymethyl-2-furancarboxylic acid,2,5-diformylfuran,and 5-formyl-2-furancarboxylic acid)with challenging selectivity control and significantly slowed reaction kinetics.This review comprehensively examines the systematic differences in HMF oxidation pathways and surface catalytic mechanisms across the full pH range from alkaline to acidic conditions.Addressing the distinct reaction characteristics and core challenges in alkaline,near-neutral,and acidic media,we systematically evaluate design strategies for high-efficiency electrocatalysts and explore reactor design aspects.Future research should focus on process integration(with tailored reactor design)for energy consumption reduction in alkaline systems,targeted synthesis of diverse oxidation products in near-neutral systems,and innovative catalyst development for acidic systems,thereby advancing the efficiency,selectivity,and practical application of HMF electrooxidation technologies across the entire pH spectrum through synergistic optimization of catalyst,reactor,and process.
基金Supported by National Natural Science Foundation of China(Grant No.51975315)National Science and Technology Major Project of China(Grant No.2019-IV-0020-0088).
文摘Nuclear reactor coolant pumps require frequent maintenance to ensure operational safety.One critical aspect of this maintenance is verifying the integrity of the mechanical sealing system.Due to the lack of an evaluation criteria and an incomplete understanding of how end-face defects lead to failure,defective mechanical seals are often replaced empirically,which not only contributes to economic losses but also poses risks to reactor safety.To reveal the mechanism by which surface defects affect sealing performance,this study proposes a classification method for end-face defects based on the analysis of approximately one hundred used mechanical seals.A defect characterization model was established by extracting key features of the observed defects.The influence of these defects on sealing performance was analyzed using a liquid-thermal-solid coupling model.Changes in sealing gap,leakage rates,and film stiffness with respect to defect size,location,and other characteristics are discussed.This work contributes to a deeper understanding of defect failure mechanisms.These results can serve as a reference for evaluating defective seals.
基金supported by Youth Innovation Promotion Association of Chinese Academy of Sciences(No.2020261)Strategic Priority Research Program of Chinese Academy of Sciences(No.XDA02010000)the Young Potential Program of Shanghai Institute of Applied Physics,Chinese Academy of Sciences(No.SINAP-YXJH-202412).
文摘Molten salt reactors,being the only reactor type among Generation Ⅳ advanced nuclear reactors that utilize liquid fuels,offer inherent safety,high-temperature,and low-pressure operation,as well as the capability for online fuel reprocessing.However,the fuel-salt flow results in the decay of delayed neutron precursors(DNPs)outside the core,causing fluctuations in the effective delayed neutron fraction and consequently impacting the reactor reactivity.Particularly in accident scenarios—such as a combined pump shutdown and the inability to rapidly scram the reactor—the sole reliance on negative temperature feedback may cause a significant increase in core temperature,posing a threat to reactor safety.To address these problems,this paper introduces an innovative design for a passive fluid-driven suspended control rod(SCR)to dynamically compensate for reactivity fluctuations caused by DNPs flowing with the fuel.The control rod operates passively by leveraging the combined effects of gravity,buoyancy,and fluid dynamic forces,thereby eliminating the need for an external drive mechanism and enabling direct integration within the active region of the core.Using a 150 MWt thorium-based molten salt reactor as the reference design,we develop a mathematical model to systematically analyze the effects of key parameters—including the geometric dimensions and density of the SCR—on its performance.We examine its motion characteristics under different core flow conditions and assess its feasibility for the dynamic compensation of reactivity changes caused by fuel flow.The results of this study demonstrate that the SCR can effectively counteract reactivity fluctuations induced by fuel flow within molten salt reactors.A sensitivity analysis reveals that the SCR’s average density exerts a profound impact on its start-up flow threshold,channel flow rate,resistance to fuel density fluctuations,and response characteristics.This underscores the critical need to optimize this parameter.Moreover,by judiciously selecting the SCR’s length,number of deployed units,and the placement we can achieve the necessary reactivity control while maintaining a favorable balance between neutron economy and heat transfer performance.Ultimately,this paper provides an innovative solution for the passive reactivity control in molten salt reactors,offering significant potential for practical engineering applications.
基金supported by the National Key Projects for Fundamental Research and development of China(2020YFA0710202)the China Postdoctoral Science Foundation(2024M761567)Shandong Postdoctoral Science Foundation(SDCX-ZG-202400271).
文摘The synthesis of propylene carbonate(PC)from CO_(2) and propylene oxide(PO)is a typical gas-liquid biphasic system,where gas-liquid mass transfer efficiency significantly influences CO_(2) cycloaddition reactions.Here,we proposed a microchannel reaction system for the CO_(2) cycloaddition reaction catalyzed by ionic liquid within an aqueous environment.The effect of liquid flow rate,temperature and residence time on gas-liquid flow pattern,catalytic performance and mass transfer were systematically investigated.The results revealed that the PC generation rate reached 560.11 mmol·ml^(−1)·h^(−1)at a 50 cm of flow distance under reaction conditions of 105℃,2.5 MPa,QG=176 ml·min^(−1) and QL=0.3 ml·min^(−1).Variations in mass transfer rate and reaction rate at different flow distances were experimentally studied.The reaction efficiency gradually decreased with increasing flow distance,which were attributed to the reduction of mass transfer caused by decreasing bubble velocity.Optimizing bubble velocity at an appropriate position enhanced reaction efficiency by improving mass transfer,achieving a 97.7%PC yield within 2.85 min.Furthermore,a kinetic model coupling intrinsic kinetics with gas-liquid mass transfer was developed for CO_(2) cycloaddition reaction.The kinetic model was applied to predict PC reaction rates in microchannel reactors at various temperatures and liquid flow rates,achieving an average relative error of 9.6%.
基金financial support from the Nuclear Energy Science&Technology and Human Resource Development Project of the Japan Atomic Energy Agency/Collaborative Laboratories for Advanced Decommissioning Science(No.R04I034)The author Ruicong Xu appreciates the scholarship(financial support)from the China Scholarship Council(CSC,No.202106380073).
文摘Laser-induced aerosols,predominantly submicron in size,pose significant environmental and health risks during the decommissioning of nuclear reactors.This study experimentally investigated the removal of laser-generated aerosol particles using a water spray system integrated with an innovative system for pre-injecting electrically charged mist in our facility.To simulate aerosol generation in reactor decommissioning,a high-power laser was used to irradiate various materials(including stainless steel,carbon steel,and concrete),generating aerosol particles that were agglomerated with injected water mist and subsequently scavenged by water spray.Experimental results demonstrate enhanced aerosol removal via aerosol-mist agglomeration,with charged mist significantly improving particle capture by increasing wettability and size.The average improvements for the stainless steel,carbon steel,and concrete were 40%,44%,and 21%,respectively.The results of experiments using charged mist with different polarities(both positive and negative)and different surface coatings reveal that the dominant polarity of aerosols varies with the irradiated materials,influenced by their crystal structure and electron emission properties.Notably,surface coatings such as ZrO_(2)and CeO_(2)were found to possibly alter aerosol charging characteristics,thereby affecting aerosol removal efficiency with charged mist configurations.The innovative aerosol-mist agglomeration approach shows promise in mitigating radiation exposure,ensuring environmental safety,and reducing contaminated water during reactor dismantling.This study contributes critical knowledge for the development of advanced aerosol management strategies for nuclear reactor decommissioning.The understanding obtained in this work is also expected to be useful for various environmental and chemical engineering applications such as gas decontamination,air purification,and pollution control.
文摘One of the main issues in designing optimum tapered cascades for uranium enrichment for annual fuel production in a power reactor is whether to employ large(fat)or small(thin)cascades.What will be the permissible and optimal ranges of the number of machines that can be used in a cascade?For the first time,the permissible and optimal ranges of the number of gas centrifuges that can be utilized in a cascade were investigated using two types of centrifuges,and the performance of small and large tapered cascades was discussed.The particle swarm optimization algorithm(PSO)has been used to optimize tapered cascades.The results show:(1)For the first centrifuge,41 cascades(91≤n≤4897)and for the second centrifuge,49 cascades(18≤n≤3839)with small and large sizes can be used in enrichment facilities,and the best cascade for them has 530(with 23 stages)and 39(with 7 stages)centrifuges,respectively.(2)For both centrifuges,when 600≤n(number of centrifuges=n),the large cascade performance changes are relatively insignificant.(3)For both types of gas centrifuges,the annual los s of separation power in enrichment facilities is approximately 1.25%-4.82%of the total separation work required.
