A fuzzy adaptive admittance control method based on real-time estimation is proposed for the motion of the hexapod wheeled-legged robot in various environments.Firstly,the mechanical structure of the robot is designed...A fuzzy adaptive admittance control method based on real-time estimation is proposed for the motion of the hexapod wheeled-legged robot in various environments.Firstly,the mechanical structure of the robot is designed,and a control system framework is proposed according to the different motion environments.To address the adaptability issue of the robot foot contact with the ground,a position-based admittance control method is proposed.Secondly,to improve the tracking performance of the robot foot contact force when the ground environment changes,a fuzzy adaptive admittance parameter adjustment method is proposed.Furthermore,to address the problem of sudden changes in the tracking difference of the foot contact force when the ground environment changes,a real-time estimation method is proposed to estimate the dynamic foot contact force.Finally,a simulation experiment is conducted in MATLAB and Simscape to verify the effectiveness of the robot motion control system,admittance control,fuzzy adaptive admittance parameters adjustment,and the realtime estimation method.Through multi-scenario experiments with the robot prototype,the control method demonstrates its effectiveness and adaptability in various environments.展开更多
This paper presents an observer-based nonlinear control method that was developed and implemented to provide accurate tracking control of a limited angle torque motor following a 50Hz reference waveform. The method is...This paper presents an observer-based nonlinear control method that was developed and implemented to provide accurate tracking control of a limited angle torque motor following a 50Hz reference waveform. The method is based on a robust nonlinear observer, which is used to estimate system states and perturbations and then employ input-output feedbazk linearization to compensate for the system nonlinearities and uncertainties. The estimation of system states and perturbations allows input-output linearization of the nonlinear system without an accurate mathematical model of nominal plant. The simulation results show that the observer-based nonlinear control method is superior in comparison with the conventional model-based state feedback linearizing controller.展开更多
Based on data from the Jilin Water Diversion Tunnels from the Songhua River(China),an improved and real-time prediction method optimized by multi-algorithm for tunnel boring machine(TBM)cutter-head torque is presented...Based on data from the Jilin Water Diversion Tunnels from the Songhua River(China),an improved and real-time prediction method optimized by multi-algorithm for tunnel boring machine(TBM)cutter-head torque is presented.Firstly,a function excluding invalid and abnormal data is established to distinguish TBM operating state,and a feature selection method based on the SelectKBest algorithm is proposed.Accordingly,ten features that are most closely related to the cutter-head torque are selected as input variables,which,in descending order of influence,include the sum of motor torque,cutter-head power,sum of motor power,sum of motor current,advance rate,cutter-head pressure,total thrust force,penetration rate,cutter-head rotational velocity,and field penetration index.Secondly,a real-time cutterhead torque prediction model’s structure is developed,based on the bidirectional long short-term memory(BLSTM)network integrating the dropout algorithm to prevent overfitting.Then,an algorithm to optimize hyperparameters of model based on Bayesian and cross-validation is proposed.Early stopping and checkpoint algorithms are integrated to optimize the training process.Finally,a BLSTMbased real-time cutter-head torque prediction model is developed,which fully utilizes the previous time-series tunneling information.The mean absolute percentage error(MAPE)of the model in the verification section is 7.3%,implying that the presented model is suitable for real-time cutter-head torque prediction.Furthermore,an incremental learning method based on the above base model is introduced to improve the adaptability of the model during the TBM tunneling.Comparison of the prediction performance between the base and incremental learning models in the same tunneling section shows that:(1)the MAPE of the predicted results of the BLSTM-based real-time cutter-head torque prediction model remains below 10%,and both the coefficient of determination(R^(2))and correlation coefficient(r)between measured and predicted values exceed 0.95;and(2)the incremental learning method is suitable for realtime cutter-head torque prediction and can effectively improve the prediction accuracy and generalization capacity of the model during the excavation process.展开更多
In real-time hybrid simulation（RTHS）, it is difficult if not impossible to completely erase the error in restoring force due to actuator response delay using existing displacement-based compensation methods. This pa...In real-time hybrid simulation（RTHS）, it is difficult if not impossible to completely erase the error in restoring force due to actuator response delay using existing displacement-based compensation methods. This paper proposes a new force correction method based on online discrete tangent stiffness estimation（online DTSE） to provide accurate online estimation of the instantaneous stiffness of the physical substructure. Following the discrete curve parameter recognition theory, the online DTSE method estimates the instantaneous stiffness mainly through adaptively building a fuzzy segment with the latest measurements, constructing several strict bounding lines of the segment and calculating the slope of the strict bounding lines, which significantly improves the calculation efficiency and accuracy for the instantaneous stiffness estimation. The results of both computational simulation and real-time hybrid simulation show that：（1） the online DTSE method has high calculation efficiency, of which the relatively short computation time will not interrupt RTHS; and（2） the online DTSE method provides better estimation for the instantaneous stiffness, compared with other existing estimation methods. Due to the quick and accurate estimation of instantaneous stiffness, the online DTSE method therefore provides a promising technique to correct restoring forces in RTHS.展开更多
In the applications of joint control and robot movement,the joint torque estimation has been treated as an effective technique and widely used.Researches are made to analyze the kinematic and compliance model of the r...In the applications of joint control and robot movement,the joint torque estimation has been treated as an effective technique and widely used.Researches are made to analyze the kinematic and compliance model of the robot joint with harmonic drive to acquire high precision torque output.Through analyzing the structures of the harmonic drive and experiment apparatus,a scheme of the proposed joint torque estimation method based on both the dynamic characteristics and unscented Kalman filter(UKF)is designed and built.Based on research and scheme,torque estimation methods in view of only harmonic drive compliance model and compliance model with the Kalman filter are simulated as guidance and reference to promote the research on the torque estimation technique.Finally,a promoted torque estimation method depending on both harmonic drive compliance model and UKF is designed,and simulation results compared with the measurements of a commercial torque sensor,have verified the effectiveness of the proposed method.展开更多
Aiming at the torque and flux ripples in the direct torque control and the time-varying parameters for permanent magnet synchronous motor (PMSM), a model predictive direct torque control with online parameter estimati...Aiming at the torque and flux ripples in the direct torque control and the time-varying parameters for permanent magnet synchronous motor (PMSM), a model predictive direct torque control with online parameter estimation based on the extended Kalman filter for PMSM is designed. By predicting the errors of torque and flux based on the model and the current states of the system, the optimal voltage vector is selected to minimize the error of torque and flux. The stator resistance and inductance are estimated online via EKF to reduce the effect of model error and the current estimation can reduce the error caused by measurement noise. The stability of the EKF is proved in theory. The simulation experiment results show the method can estimate the motor parameters, reduce the torque, and flux ripples and improve the performance of direct torque control for permanent magnet synchronous motor (PMSM).展开更多
As unmanned electric wheeled mobile robots have been increasingly applied to high-speed operations in unknown environments,the wheel slip becomes a problem when the robot is either accelerating,decelerating,or turning...As unmanned electric wheeled mobile robots have been increasingly applied to high-speed operations in unknown environments,the wheel slip becomes a problem when the robot is either accelerating,decelerating,or turning at high speed.Ignoring the effect of wheel slip may cause the mobile robot to deviate from the desired path.In this paper a recently proposed method is implemented to estimate the surface conditions encountered by an unmanned wheeled mobile robot,without using extra sensors.The method is simple,economical and needs less processing power than for other methods.A reaction torque observer is used to obtain the rolling resistance torque and it is applied to a wheeled mobile robot to obtain the surface condition in real-time for each wheel.The slip information is observed by comparing the reaction torque of each wheel.The obtained slip information is then used to control the torque of both wheels using a torque controller.Wheel slip is minimized by controlling the torque of each wheel.Minimizing the slip improves the ability of the unmanned electric wheeled mobile robot to navigate in the desired path in an unknown environment,regardless of the nature of the surface.展开更多
Nonlinear model predictive control(NMPC) is an appealing control technique for improving the performance of batch processes, but its implementation in industry is not always possible due to its heavy on-line computati...Nonlinear model predictive control(NMPC) is an appealing control technique for improving the performance of batch processes, but its implementation in industry is not always possible due to its heavy on-line computation. To facilitate the implementation of NMPC in batch processes, we propose a real-time updated model predictive control method based on state estimation. The method includes two strategies: a multiple model building strategy and a real-time model updated strategy. The multiple model building strategy is to produce a series of sim-plified models to reduce the on-line computational complexity of NMPC. The real-time model updated strategy is to update the simplified models to keep the accuracy of the models describing dynamic process behavior. The me-thod is validated with a typical batch reactor. Simulation studies show that the new method is efficient and robust with respect to model mismatch and changes in process parameters.展开更多
Objective:To perform whole-genome sequencing and phylogenetic analysis of the local endemic strain of Rodent Torque teno virus (RoTTV), RoTTV3-HMU1, found in Rattus norvegicus, Haikou City, Hainan Province, and establ...Objective:To perform whole-genome sequencing and phylogenetic analysis of the local endemic strain of Rodent Torque teno virus (RoTTV), RoTTV3-HMU1, found in Rattus norvegicus, Haikou City, Hainan Province, and establish a SYBR Green I based real-time PCR detection assay for RoTTV3.Methods: Based on the high-throughput genome sequencing analysis, specific primers were designed and the whole genome sequence was amplified by PCR and Sanger sequencing. Specific detection primers were designed based on the conserved sequences of RoTTV3. The recombinant plasmid contained the whole genome of RoTTV3-HMU1 was constructed as a standard control. The experimental conditions were optimized and the real-time PCR detection assay of RoTTV3 was established.Results: The genomic sequence of RoTTV carried by Rattus norvegicus in Haikou City was successfully sequenced. Phylogenetic analysis indicated that the virus belongs to the RoTTV3 genotype. In this experiment, the real-time PCR detection method of RoTTV3 was established. The standard curve generated had a wide dynamic range from 1×(102-108) copies/μL, with a linear correlation (R2=1.000). The melting curve analysis using SYBR Green showed only one specific melting peak and no primer-dimmers represented. The detection limit was 100 copies/reaction.Discussion: This study was the first report of the RoTTV in Hainan Islands, and its phylogenetic analysis was of great significance to the origin and evolution of RoTTV. The RoTTV3 real-time PCR detection method established in this experiment has a high sensitivity and good specificity, which lays a technical foundation for the epidemiological investigation of RoTTV3.展开更多
In this paper, it presents a project of a fuzzy controller and a neural estimator to control a coordinate table powered by three-phase induction motor, aiming to implement an intelligent milling system. The position/s...In this paper, it presents a project of a fuzzy controller and a neural estimator to control a coordinate table powered by three-phase induction motor, aiming to implement an intelligent milling system. The position/speed control is performed using vector techniques of three-phase induction machines. The estimation of the motor electromagnetic torque is used for setting the feedrate of the table. The speed control is developed using TS （Takagi-Sugeno） fuzzy logic model and electromagnetic torque estimation using neural network type LMS （least mean square） algorithm. The induction motor is powered by a frequency inverter driven by a DSP （digital signal processor）. Control strategies are implemented in DSP. Simulation results are presented for evaluating the performance of the system.展开更多
Automatic maqam estimation is considered significant toward improving multimedia live music performances and automatic accompaniment. This contribution proposed a real-time maqam estimation model developed in the visu...Automatic maqam estimation is considered significant toward improving multimedia live music performances and automatic accompaniment. This contribution proposed a real-time maqam estimation model developed in the visual programming language MAX/MSP and configured for the nāydukah. The model’s design stood on basic formulas of Arab music maqamat as explained in theory and applied in practice. The model consisted of different layers of competition;the first was for the identification of the instant tonic of the melodic figure, and the second was for the recognition of its identifying E (E, E half-flat and E flat). Those two competitions were used to estimate the maqam in real-time. Then, accumulated estimation results were used to estimate the maqam in longer durations;five-second and full duration. The model was evaluated using professionally performed nāy improvisations. Results reflected a success in estimating all the studied maqamat when the full improvisation was considered. In addition, results were very good for real-time and five-second estimation where average estimation confidence was 75.98% and 80.04%, respectively.展开更多
This paper proposes an extended-flux model with core-loss resistance of SynRMs （synchronous reluctance motors） and precise torque estimation without core-loss measurement and position encoder. The proposed torque es...This paper proposes an extended-flux model with core-loss resistance of SynRMs （synchronous reluctance motors） and precise torque estimation without core-loss measurement and position encoder. The proposed torque estimation is useful for precise MTPA （maximum torque per ampere） control of position sensorless controlled SynRMs, which is achieved with the assistance of active and reactive powers.展开更多
Large portions of the tunnel boring machine(TBM)construction cost are attributed to disc cutter consumption,and assessing the disc cutter's wear level can help determine the optimal time to replace the disc cutter...Large portions of the tunnel boring machine(TBM)construction cost are attributed to disc cutter consumption,and assessing the disc cutter's wear level can help determine the optimal time to replace the disc cutter.Therefore,the need to monitor disc cutter wear in real-time has emerged as a technical challenge for TBMs.In this study,real-time disc cutter wear monitoring is developed based on sound and vibration sensors.For this purpose,the microphone and accelerometer were used to record the sound and vibration signals of cutting three different types of rocks with varying abrasions on a laboratory scale.The relationship between disc cutter wear and the sound and vibration signal was determined by comparing the measurements of disc cutter wear with the signal plots for each sample.The features extracted from the signals showed that the sound and vibration signals are impacted by the progression of disc wear during the rock-cutting process.The signal features obtained from the rock-cutting operation were utilized to verify the machine learning techniques.The results showed that the multilayer perceptron(MLP),random subspace-based decision tree(RS-DT),DT,and random forest(RF)methods could predict the wear level of the disc cutter with an accuracy of 0.89,0.951,0.951,and 0.927,respectively.Based on the accuracy of the models and the confusion matrix,it was found that the RS-DT model has the best estimate for predicting the level of disc wear.This research has developed a method that can potentially determine when to replace a tool and assess disc wear in real-time.展开更多
In order to compensate for the disturbance of wide variation in rotor demanded torque on power turbine speed and realize the fast response control of turboshaft engine during variable rotor speed,a cascade PID control...In order to compensate for the disturbance of wide variation in rotor demanded torque on power turbine speed and realize the fast response control of turboshaft engine during variable rotor speed,a cascade PID control method based on the acceleration estimator of gas turbine speed(Ngdot)and rotor predicted torque feedforward is proposed.Firstly,a two-speed Dual Clutch Transmission(DCT)model is applied in the integrated rotor/turboshaft engine system to achieve variable rotor speed.Then,an online estimation method of Ngdot based on the Linear Quadratic Gaussian with Loop Transfer Recovery(LQG/LTR)is proposed for power turbine speed cascade control.Finally,according to the cascade PID controller based on Ngdot estimator,a rotor demanded torque predicted method based on the Min-batch Gradient Descent-Neural Network(MGD-NN)is put forward to compromise the influence of rotor torque interference.The simulation results show that compared with cascade PID controller based on Ngdot estimator and the one combined with collective pitch feedforward control,the novel control method proposed can reduce the overshoot of power turbine speed by more than 20%,which possesses faster response,superior dynamic effect and satisfactory robustness performance.The control method proposed can realize the fast response control of turboshaft engine with variable rotor speed better.展开更多
Self-localization and orientation estimation are the essential capabilities for mobile robot navigation.In this article,a robust and real-time visual-inertial-GNSS(Global Navigation Satellite System)tightly coupled po...Self-localization and orientation estimation are the essential capabilities for mobile robot navigation.In this article,a robust and real-time visual-inertial-GNSS(Global Navigation Satellite System)tightly coupled pose estimation(RRVPE)method for aerial robot navigation is presented.The aerial robot carries a front-facing stereo camera for self-localization and an RGB-D camera to generate 3D voxel map.Ulteriorly,a GNSS receiver is used to continuously provide pseudorange,Doppler frequency shift and universal time coordinated(UTC)pulse signals to the pose estimator.The proposed system leverages the Kanade Lucas algorithm to track Shi-Tomasi features in each video frame,and the local factor graph solution process is bounded in a circumscribed container,which can immensely abandon the computational complexity in nonlinear optimization procedure.The proposed robot pose estimator can achieve camera-rate(30 Hz)performance on the aerial robot companion computer.We thoroughly experimented the RRVPE system in both simulated and practical circumstances,and the results demonstrate dramatic advantages over the state-of-the-art robot pose estimators.展开更多
In this paper, an improved PI （proportional integral） stator resistance estimation for a DTC （direct torque controlled） induction motor is proposed. This estimation method is based on an on-line stator resistance ...In this paper, an improved PI （proportional integral） stator resistance estimation for a DTC （direct torque controlled） induction motor is proposed. This estimation method is based on an on-line stator resistance correction regarding the variations of the stator current estimation error. In fact, the input variable of the P1 estimator is the stator current estimation error. The main idea is to tune accurately the stator resistance value relatively to the evolution of the stator current estimation error gradient to avoid the drive instability and ensure the tracking of the actual value of the stator resistance. But there is an unavoidable steady state error between the filtered stator current modulus and its estimated value from the dq model of the machine which is due to pseudo random commutations of the inverter switches. This may deteriorate the performance of the proposed fuzzy stator resistance estimator. An offset has been introduced in order to overcome this problem, for different speed command values and load torques. Simulation results show that the proposed estimator was able to successfully track the actual value of the stator resistance lbr different operating conditions.展开更多
A new hybrid wavelet-Kalman filter method for the estimation of dynamic system is developed, Using this method, the real-time multiscale estimation of the dynamic system is implemented, and the observation equation es...A new hybrid wavelet-Kalman filter method for the estimation of dynamic system is developed, Using this method, the real-time multiscale estimation of the dynamic system is implemented, and the observation equation established is for the object signal itself rather than its wavelet decomposition. The simulation results show that this method can be used to estimate the object's state of the stacked system, which is the foundation of multiscale data fusion; besides the performance of the new algorithm developed in the letter is almost optimal.展开更多
It is necessary to know the status of adhesion conditions between wheel and rail for efficient accelerating and decelerating of railroad vehicle.The proper estimation of adhesion conditions and their real-time impleme...It is necessary to know the status of adhesion conditions between wheel and rail for efficient accelerating and decelerating of railroad vehicle.The proper estimation of adhesion conditions and their real-time implementation is considered a challenge for scholars.In this paper,the development of simulation model of extended Kalman filter(EKF)in MATLAB/Simulink is presented to estimate various railway wheelset parameters in different contact conditions of track.Due to concurrent in nature,the Xilinx®System-on-Chip Zynq Field Programmable Gate Array(FPGA)device is chosen to check the onboard estimation ofwheel-rail interaction parameters by using the National Instruments(NI)myRIO®development board.The NImyRIO®development board is flexible to deal with nonlinearities,uncertain changes,and fastchanging dynamics in real-time occurring in wheel-rail contact conditions during vehicle operation.The simulated dataset of the railway nonlinear wheelsetmodel is tested on FPGA-based EKF with different track conditions and with accelerating and decelerating operations of the vehicle.The proposed model-based estimation of railway wheelset parameters is synthesized on FPGA and its simulation is carried out for functional verification on FPGA.The obtained simulation results are aligned with the simulation results obtained through MATLAB.To the best of our knowledge,this is the first time study that presents the implementation of a model-based estimation of railway wheelset parameters on FPGA and its functional verification.The functional behavior of the FPGA-based estimator shows that these results are the addition of current knowledge in the field of the railway.展开更多
基金National Natural Science Foundation of China(No.U1831123)。
文摘A fuzzy adaptive admittance control method based on real-time estimation is proposed for the motion of the hexapod wheeled-legged robot in various environments.Firstly,the mechanical structure of the robot is designed,and a control system framework is proposed according to the different motion environments.To address the adaptability issue of the robot foot contact with the ground,a position-based admittance control method is proposed.Secondly,to improve the tracking performance of the robot foot contact force when the ground environment changes,a fuzzy adaptive admittance parameter adjustment method is proposed.Furthermore,to address the problem of sudden changes in the tracking difference of the foot contact force when the ground environment changes,a real-time estimation method is proposed to estimate the dynamic foot contact force.Finally,a simulation experiment is conducted in MATLAB and Simscape to verify the effectiveness of the robot motion control system,admittance control,fuzzy adaptive admittance parameters adjustment,and the realtime estimation method.Through multi-scenario experiments with the robot prototype,the control method demonstrates its effectiveness and adaptability in various environments.
文摘This paper presents an observer-based nonlinear control method that was developed and implemented to provide accurate tracking control of a limited angle torque motor following a 50Hz reference waveform. The method is based on a robust nonlinear observer, which is used to estimate system states and perturbations and then employ input-output feedbazk linearization to compensate for the system nonlinearities and uncertainties. The estimation of system states and perturbations allows input-output linearization of the nonlinear system without an accurate mathematical model of nominal plant. The simulation results show that the observer-based nonlinear control method is superior in comparison with the conventional model-based state feedback linearizing controller.
基金financially supported by the National Natural Science Foundation of China (Grant Nos. 52074258, 41941018, and U21A20153)
文摘Based on data from the Jilin Water Diversion Tunnels from the Songhua River(China),an improved and real-time prediction method optimized by multi-algorithm for tunnel boring machine(TBM)cutter-head torque is presented.Firstly,a function excluding invalid and abnormal data is established to distinguish TBM operating state,and a feature selection method based on the SelectKBest algorithm is proposed.Accordingly,ten features that are most closely related to the cutter-head torque are selected as input variables,which,in descending order of influence,include the sum of motor torque,cutter-head power,sum of motor power,sum of motor current,advance rate,cutter-head pressure,total thrust force,penetration rate,cutter-head rotational velocity,and field penetration index.Secondly,a real-time cutterhead torque prediction model’s structure is developed,based on the bidirectional long short-term memory(BLSTM)network integrating the dropout algorithm to prevent overfitting.Then,an algorithm to optimize hyperparameters of model based on Bayesian and cross-validation is proposed.Early stopping and checkpoint algorithms are integrated to optimize the training process.Finally,a BLSTMbased real-time cutter-head torque prediction model is developed,which fully utilizes the previous time-series tunneling information.The mean absolute percentage error(MAPE)of the model in the verification section is 7.3%,implying that the presented model is suitable for real-time cutter-head torque prediction.Furthermore,an incremental learning method based on the above base model is introduced to improve the adaptability of the model during the TBM tunneling.Comparison of the prediction performance between the base and incremental learning models in the same tunneling section shows that:(1)the MAPE of the predicted results of the BLSTM-based real-time cutter-head torque prediction model remains below 10%,and both the coefficient of determination(R^(2))and correlation coefficient(r)between measured and predicted values exceed 0.95;and(2)the incremental learning method is suitable for realtime cutter-head torque prediction and can effectively improve the prediction accuracy and generalization capacity of the model during the excavation process.
基金Priority Academic Program Development of Jiangsu Higher Education Institutions under Grant No.1105007002National Natural Science Foundation of China under Grant No.51378107 and No.51678147
文摘In real-time hybrid simulation（RTHS）, it is difficult if not impossible to completely erase the error in restoring force due to actuator response delay using existing displacement-based compensation methods. This paper proposes a new force correction method based on online discrete tangent stiffness estimation（online DTSE） to provide accurate online estimation of the instantaneous stiffness of the physical substructure. Following the discrete curve parameter recognition theory, the online DTSE method estimates the instantaneous stiffness mainly through adaptively building a fuzzy segment with the latest measurements, constructing several strict bounding lines of the segment and calculating the slope of the strict bounding lines, which significantly improves the calculation efficiency and accuracy for the instantaneous stiffness estimation. The results of both computational simulation and real-time hybrid simulation show that：（1） the online DTSE method has high calculation efficiency, of which the relatively short computation time will not interrupt RTHS; and（2） the online DTSE method provides better estimation for the instantaneous stiffness, compared with other existing estimation methods. Due to the quick and accurate estimation of instantaneous stiffness, the online DTSE method therefore provides a promising technique to correct restoring forces in RTHS.
基金supported by the National Natural Science Foundation of China(51879055)。
文摘In the applications of joint control and robot movement,the joint torque estimation has been treated as an effective technique and widely used.Researches are made to analyze the kinematic and compliance model of the robot joint with harmonic drive to acquire high precision torque output.Through analyzing the structures of the harmonic drive and experiment apparatus,a scheme of the proposed joint torque estimation method based on both the dynamic characteristics and unscented Kalman filter(UKF)is designed and built.Based on research and scheme,torque estimation methods in view of only harmonic drive compliance model and compliance model with the Kalman filter are simulated as guidance and reference to promote the research on the torque estimation technique.Finally,a promoted torque estimation method depending on both harmonic drive compliance model and UKF is designed,and simulation results compared with the measurements of a commercial torque sensor,have verified the effectiveness of the proposed method.
文摘Aiming at the torque and flux ripples in the direct torque control and the time-varying parameters for permanent magnet synchronous motor (PMSM), a model predictive direct torque control with online parameter estimation based on the extended Kalman filter for PMSM is designed. By predicting the errors of torque and flux based on the model and the current states of the system, the optimal voltage vector is selected to minimize the error of torque and flux. The stator resistance and inductance are estimated online via EKF to reduce the effect of model error and the current estimation can reduce the error caused by measurement noise. The stability of the EKF is proved in theory. The simulation experiment results show the method can estimate the motor parameters, reduce the torque, and flux ripples and improve the performance of direct torque control for permanent magnet synchronous motor (PMSM).
文摘As unmanned electric wheeled mobile robots have been increasingly applied to high-speed operations in unknown environments,the wheel slip becomes a problem when the robot is either accelerating,decelerating,or turning at high speed.Ignoring the effect of wheel slip may cause the mobile robot to deviate from the desired path.In this paper a recently proposed method is implemented to estimate the surface conditions encountered by an unmanned wheeled mobile robot,without using extra sensors.The method is simple,economical and needs less processing power than for other methods.A reaction torque observer is used to obtain the rolling resistance torque and it is applied to a wheeled mobile robot to obtain the surface condition in real-time for each wheel.The slip information is observed by comparing the reaction torque of each wheel.The obtained slip information is then used to control the torque of both wheels using a torque controller.Wheel slip is minimized by controlling the torque of each wheel.Minimizing the slip improves the ability of the unmanned electric wheeled mobile robot to navigate in the desired path in an unknown environment,regardless of the nature of the surface.
基金Supported by the National Natural Science Foundation of China(21136003,21176089)the National Science&Technology Support Plan(2012BAK13B02)+2 种基金the National Major Basic Research Program(2014CB744306)the Natural Science Foundation Team Project of Guangdong Province(S2011030001366)the Fundamental Research Funds for Central Universities(2013ZP0010)
文摘Nonlinear model predictive control(NMPC) is an appealing control technique for improving the performance of batch processes, but its implementation in industry is not always possible due to its heavy on-line computation. To facilitate the implementation of NMPC in batch processes, we propose a real-time updated model predictive control method based on state estimation. The method includes two strategies: a multiple model building strategy and a real-time model updated strategy. The multiple model building strategy is to produce a series of sim-plified models to reduce the on-line computational complexity of NMPC. The real-time model updated strategy is to update the simplified models to keep the accuracy of the models describing dynamic process behavior. The me-thod is validated with a typical batch reactor. Simulation studies show that the new method is efficient and robust with respect to model mismatch and changes in process parameters.
基金National natural science foundation of China,No.81860367,31460017,81672072Key Research and Development Program of Hainan Province,No.ZDYF2017091+1 种基金Special Project for Scientific Research of Institutions of Higher Learning in Hainan Province,No.Hnky2017ZD-16,Hnkyzx2014-08Open Fund Project of State key Laboratory of Virology in 2018.Project,No.2018IOV002.
文摘Objective:To perform whole-genome sequencing and phylogenetic analysis of the local endemic strain of Rodent Torque teno virus (RoTTV), RoTTV3-HMU1, found in Rattus norvegicus, Haikou City, Hainan Province, and establish a SYBR Green I based real-time PCR detection assay for RoTTV3.Methods: Based on the high-throughput genome sequencing analysis, specific primers were designed and the whole genome sequence was amplified by PCR and Sanger sequencing. Specific detection primers were designed based on the conserved sequences of RoTTV3. The recombinant plasmid contained the whole genome of RoTTV3-HMU1 was constructed as a standard control. The experimental conditions were optimized and the real-time PCR detection assay of RoTTV3 was established.Results: The genomic sequence of RoTTV carried by Rattus norvegicus in Haikou City was successfully sequenced. Phylogenetic analysis indicated that the virus belongs to the RoTTV3 genotype. In this experiment, the real-time PCR detection method of RoTTV3 was established. The standard curve generated had a wide dynamic range from 1×(102-108) copies/μL, with a linear correlation (R2=1.000). The melting curve analysis using SYBR Green showed only one specific melting peak and no primer-dimmers represented. The detection limit was 100 copies/reaction.Discussion: This study was the first report of the RoTTV in Hainan Islands, and its phylogenetic analysis was of great significance to the origin and evolution of RoTTV. The RoTTV3 real-time PCR detection method established in this experiment has a high sensitivity and good specificity, which lays a technical foundation for the epidemiological investigation of RoTTV3.
文摘In this paper, it presents a project of a fuzzy controller and a neural estimator to control a coordinate table powered by three-phase induction motor, aiming to implement an intelligent milling system. The position/speed control is performed using vector techniques of three-phase induction machines. The estimation of the motor electromagnetic torque is used for setting the feedrate of the table. The speed control is developed using TS （Takagi-Sugeno） fuzzy logic model and electromagnetic torque estimation using neural network type LMS （least mean square） algorithm. The induction motor is powered by a frequency inverter driven by a DSP （digital signal processor）. Control strategies are implemented in DSP. Simulation results are presented for evaluating the performance of the system.
文摘Automatic maqam estimation is considered significant toward improving multimedia live music performances and automatic accompaniment. This contribution proposed a real-time maqam estimation model developed in the visual programming language MAX/MSP and configured for the nāydukah. The model’s design stood on basic formulas of Arab music maqamat as explained in theory and applied in practice. The model consisted of different layers of competition;the first was for the identification of the instant tonic of the melodic figure, and the second was for the recognition of its identifying E (E, E half-flat and E flat). Those two competitions were used to estimate the maqam in real-time. Then, accumulated estimation results were used to estimate the maqam in longer durations;five-second and full duration. The model was evaluated using professionally performed nāy improvisations. Results reflected a success in estimating all the studied maqamat when the full improvisation was considered. In addition, results were very good for real-time and five-second estimation where average estimation confidence was 75.98% and 80.04%, respectively.
文摘This paper proposes an extended-flux model with core-loss resistance of SynRMs （synchronous reluctance motors） and precise torque estimation without core-loss measurement and position encoder. The proposed torque estimation is useful for precise MTPA （maximum torque per ampere） control of position sensorless controlled SynRMs, which is achieved with the assistance of active and reactive powers.
文摘Large portions of the tunnel boring machine(TBM)construction cost are attributed to disc cutter consumption,and assessing the disc cutter's wear level can help determine the optimal time to replace the disc cutter.Therefore,the need to monitor disc cutter wear in real-time has emerged as a technical challenge for TBMs.In this study,real-time disc cutter wear monitoring is developed based on sound and vibration sensors.For this purpose,the microphone and accelerometer were used to record the sound and vibration signals of cutting three different types of rocks with varying abrasions on a laboratory scale.The relationship between disc cutter wear and the sound and vibration signal was determined by comparing the measurements of disc cutter wear with the signal plots for each sample.The features extracted from the signals showed that the sound and vibration signals are impacted by the progression of disc wear during the rock-cutting process.The signal features obtained from the rock-cutting operation were utilized to verify the machine learning techniques.The results showed that the multilayer perceptron(MLP),random subspace-based decision tree(RS-DT),DT,and random forest(RF)methods could predict the wear level of the disc cutter with an accuracy of 0.89,0.951,0.951,and 0.927,respectively.Based on the accuracy of the models and the confusion matrix,it was found that the RS-DT model has the best estimate for predicting the level of disc wear.This research has developed a method that can potentially determine when to replace a tool and assess disc wear in real-time.
基金co-supported by the National Natural Science Foundation of China,China(Nos.51576096 and 51906102)Qing Lan and 333 Project,the Fundamental Research Funds for the Central Universities,China(No.NT2019004)+3 种基金National Science and Technology Major Project China(No.2017-V-0004-0054)Research on the Basic Problem of Intelligent Aero-engine,China(No.2017-JCJQ-ZD-04721)China Postdoctoral Science Foundation Funded Project,China(No.2019M661835)Aeronautics Power Foundation,China(No.6141B09050385)。
文摘In order to compensate for the disturbance of wide variation in rotor demanded torque on power turbine speed and realize the fast response control of turboshaft engine during variable rotor speed,a cascade PID control method based on the acceleration estimator of gas turbine speed(Ngdot)and rotor predicted torque feedforward is proposed.Firstly,a two-speed Dual Clutch Transmission(DCT)model is applied in the integrated rotor/turboshaft engine system to achieve variable rotor speed.Then,an online estimation method of Ngdot based on the Linear Quadratic Gaussian with Loop Transfer Recovery(LQG/LTR)is proposed for power turbine speed cascade control.Finally,according to the cascade PID controller based on Ngdot estimator,a rotor demanded torque predicted method based on the Min-batch Gradient Descent-Neural Network(MGD-NN)is put forward to compromise the influence of rotor torque interference.The simulation results show that compared with cascade PID controller based on Ngdot estimator and the one combined with collective pitch feedforward control,the novel control method proposed can reduce the overshoot of power turbine speed by more than 20%,which possesses faster response,superior dynamic effect and satisfactory robustness performance.The control method proposed can realize the fast response control of turboshaft engine with variable rotor speed better.
基金Supported by the Guizhou Provincial Science and Technology Projects([2020]2Y044)the Science and Technology Projects of China Southern Power Grid Co.Ltd.(066600KK52170074)the National Natural Science Foundation of China(61473144)。
文摘Self-localization and orientation estimation are the essential capabilities for mobile robot navigation.In this article,a robust and real-time visual-inertial-GNSS(Global Navigation Satellite System)tightly coupled pose estimation(RRVPE)method for aerial robot navigation is presented.The aerial robot carries a front-facing stereo camera for self-localization and an RGB-D camera to generate 3D voxel map.Ulteriorly,a GNSS receiver is used to continuously provide pseudorange,Doppler frequency shift and universal time coordinated(UTC)pulse signals to the pose estimator.The proposed system leverages the Kanade Lucas algorithm to track Shi-Tomasi features in each video frame,and the local factor graph solution process is bounded in a circumscribed container,which can immensely abandon the computational complexity in nonlinear optimization procedure.The proposed robot pose estimator can achieve camera-rate(30 Hz)performance on the aerial robot companion computer.We thoroughly experimented the RRVPE system in both simulated and practical circumstances,and the results demonstrate dramatic advantages over the state-of-the-art robot pose estimators.
文摘In this paper, an improved PI （proportional integral） stator resistance estimation for a DTC （direct torque controlled） induction motor is proposed. This estimation method is based on an on-line stator resistance correction regarding the variations of the stator current estimation error. In fact, the input variable of the P1 estimator is the stator current estimation error. The main idea is to tune accurately the stator resistance value relatively to the evolution of the stator current estimation error gradient to avoid the drive instability and ensure the tracking of the actual value of the stator resistance. But there is an unavoidable steady state error between the filtered stator current modulus and its estimated value from the dq model of the machine which is due to pseudo random commutations of the inverter switches. This may deteriorate the performance of the proposed fuzzy stator resistance estimator. An offset has been introduced in order to overcome this problem, for different speed command values and load torques. Simulation results show that the proposed estimator was able to successfully track the actual value of the stator resistance lbr different operating conditions.
基金Supported by National Natural Science Foundation of China(No.60434020, 60374020)International Cooperation Item of Henan(No.0446650006)Henan Outstanding Youth Science Fund(No.0312001900)
文摘A new hybrid wavelet-Kalman filter method for the estimation of dynamic system is developed, Using this method, the real-time multiscale estimation of the dynamic system is implemented, and the observation equation established is for the object signal itself rather than its wavelet decomposition. The simulation results show that this method can be used to estimate the object's state of the stacked system, which is the foundation of multiscale data fusion; besides the performance of the new algorithm developed in the letter is almost optimal.
文摘It is necessary to know the status of adhesion conditions between wheel and rail for efficient accelerating and decelerating of railroad vehicle.The proper estimation of adhesion conditions and their real-time implementation is considered a challenge for scholars.In this paper,the development of simulation model of extended Kalman filter(EKF)in MATLAB/Simulink is presented to estimate various railway wheelset parameters in different contact conditions of track.Due to concurrent in nature,the Xilinx®System-on-Chip Zynq Field Programmable Gate Array(FPGA)device is chosen to check the onboard estimation ofwheel-rail interaction parameters by using the National Instruments(NI)myRIO®development board.The NImyRIO®development board is flexible to deal with nonlinearities,uncertain changes,and fastchanging dynamics in real-time occurring in wheel-rail contact conditions during vehicle operation.The simulated dataset of the railway nonlinear wheelsetmodel is tested on FPGA-based EKF with different track conditions and with accelerating and decelerating operations of the vehicle.The proposed model-based estimation of railway wheelset parameters is synthesized on FPGA and its simulation is carried out for functional verification on FPGA.The obtained simulation results are aligned with the simulation results obtained through MATLAB.To the best of our knowledge,this is the first time study that presents the implementation of a model-based estimation of railway wheelset parameters on FPGA and its functional verification.The functional behavior of the FPGA-based estimator shows that these results are the addition of current knowledge in the field of the railway.
