Electroacoustic Tomography(EAT)is an imaging technique that detects ultrasound waves induced by electrical pulses,offering a solution for real-time electroporation monitoring.This study presents EAT system using a dua...Electroacoustic Tomography(EAT)is an imaging technique that detects ultrasound waves induced by electrical pulses,offering a solution for real-time electroporation monitoring.This study presents EAT system using a dual-frequency ultrasound array.The broadband nature of electroacoustic signals requires ultrasound detector to cover both the high-frequency range(around 6MHz)signals generated by small targets and the low-frequency range(around 1MHz)signals generated by large targets.In our EAT system,we use the 6 MHz array to detect high-frequency signals from the electrodes,and the 1 MHz array for the electrical field.To test this,we conducted simulations using COMSOL Multiphysics^(®) and MATLAB's k-Wave toolbox,followed by experiments using a custom-built setup with a dual-frequency transducer and real-time data acquisition.The results demonstrated that the dual-frequency EAT system could accurately and simultaneously monitor the electroporation process,effectively showing both the treatment area and electrode placement with the application of 1 kV electric pulses with 100 ns duration.The axial resolution of the 6MHz array for EAT was 0.45 mm,significantly better than the 2mm resolution achieved with the 1MHz array.These findings validate the potential of dual-frequency EAT as a superior method for real-time electroporation monitoring.展开更多
Vehicle-induced response separation is a crucial issue in structural health monitoring(SHM).This paper proposes a block-wise sliding recursive wavelet transform algorithm to meet the real-time processing requirements ...Vehicle-induced response separation is a crucial issue in structural health monitoring(SHM).This paper proposes a block-wise sliding recursive wavelet transform algorithm to meet the real-time processing requirements of monitoring data.To extend the separation target from a fixed dataset to a continuously updating data stream,a block-wise sliding framework is first developed.This framework is further optimized considering the characteristics of real-time data streams,and its advantage in computational efficiency is theoretically demonstrated.During the decomposition and reconstruction processes,information from neighboring data blocks is fully utilized to reduce algorithmic complexity.In addition,a delay-setting strategy is introduced for each processing window to mitigate boundary effects,thereby balancing accuracy and efficiency.Simulated signal experiments are conducted to determine the optimal delay configuration and to verify the algorithm’s superior performance,achieving a lower Root Mean Square Error(RMSE)and only 0.0249 times the average computational time compared with the original algorithm.Furthermore,strain signals from the Lieshi River Bridge are employed to validate the method.The proposed algorithm successfully separates the static trend from vehicle-induced responses in real time across different sampling frequencies,demonstrating its effectiveness and applicability in real-time bridge monitoring.展开更多
To investigate the energy relief effect of real-time drilling in preventing rockburst in high-stress rock,a series of high-stress real-time drilling uniaxial compression tests were conducted on red sandstone specimens...To investigate the energy relief effect of real-time drilling in preventing rockburst in high-stress rock,a series of high-stress real-time drilling uniaxial compression tests were conducted on red sandstone specimens using the SG4500 drilling rig.Results showed that the mechanical behavior(i.e.peak strength and rockburst intensity)of the rock was weakened under high-stress real-time drilling and exhibited a downward trend as the drilling diameter increased.The real-time drilling energy dissipation index(ERD)was proposed to characterize the energy relief during high-stress real-time drilling.The ERD exhibited a linear increase with the real-time drilling diameter.Furthermore,the elastic strain energy of post-drilling rock showed a linear relationship with the square of stress across different stress levels,which also applied to the peak elastic strain energy and the square of peak stress.This findingreveals the intrinsic link between the weakening effect of peak elastic strain energy and peak strength due to high-stress real-time drilling,confirmingthe consistency between energy relief and pressure relief effects.By establishing relationships among rockburst proneness,peak elastic strain energy,and peak strength,it was demonstrated that high-stress real-time drilling reduces rockburst proneness through energy dissipation.Specifically,both peak elastic strain energy and rockburst proneness decreased with larger drill bit diameters,consistent with reductions in peak strength,rockburst intensity,and fractal dimensions of high-stress real-time drilled rock.These results validate the energy relief mechanism of real-time drilling in mitigating rockburst risks.展开更多
An innovative real-time monitoring method for surrounding rock damage based on microseismic time-lapse double-difference tomography is proposed for delayed dynamic damage identification and insufficient detection of a...An innovative real-time monitoring method for surrounding rock damage based on microseismic time-lapse double-difference tomography is proposed for delayed dynamic damage identification and insufficient detection of adverse geological conditions in deep-buried tunnel construction.The installation techniques for microseismic sensors were optimized by mounting sensors at bolt ends which significantly improves signal-to-noise ratio(SNR)and anti-interference capability compared to conventional borehole placement.Subsequently,a 3D wave velocity evolution model that incorporates construction-induced disturbances was established,enabling the first visualization of spatiotemporal variations in surrounding rock wave velocity.It finds significant wave velocity reduction near the tunnel face,with roof and floor damage zones extending 40–50 m;wave velocities approaching undisturbed levels at 15 m ahead of the working face and on the laterally undisturbed side;pronounced spatial asymmetry in wave velocity distribution—values on the left side exceed those on the right,with a clear stress concentration or transition zone located 10–15 m;and systematically lower velocities behind the face than in front,indicating asymmetric rock damage development.These results provide essential theoretical support and practical guidance for optimizing dynamic construction strategies,enabling real-time adjustment of support parameters,and establishing safety early warning systems in deep-buried tunnel engineering.展开更多
Online examinations have become a dominant assessment mode,increasing concerns over academic integrity.To address the critical challenge of detecting cheating behaviours,this study proposes a hybrid deep learning appr...Online examinations have become a dominant assessment mode,increasing concerns over academic integrity.To address the critical challenge of detecting cheating behaviours,this study proposes a hybrid deep learning approach that combines visual detection and temporal behaviour classification.The methodology utilises object detection models—You Only Look Once(YOLOv12),Faster Region-based Convolutional Neural Network(RCNN),and Single Shot Detector(SSD)MobileNet—integrated with classification models such as Convolutional Neural Networks(CNN),Bidirectional Gated Recurrent Unit(Bi-GRU),and CNN-LSTM(Long Short-Term Memory).Two distinct datasets were used:the Online Exam Proctoring(EOP)dataset from Michigan State University and the School of Computer Science,Duy Tan Unievrsity(SCS-DTU)dataset collected in a controlled classroom setting.A diverse set of cheating behaviours,including book usage,unauthorised interaction,internet access,and mobile phone use,was categorised.Comprehensive experiments evaluated the models based on accuracy,precision,recall,training time,inference speed,and memory usage.We evaluate nine detector-classifier pairings under a unified budget and score them via a calibrated harmonic mean of detection and classification accuracies,enabling deployment-oriented selection under latency and memory constraints.Macro-Precision/Recall/F1 and Receiver Operating Characteristic-Area Under the Curve(ROC-AUC)are reported for the top configurations,revealing consistent advantages of object-centric pipelines for fine-grained cheating cues.The highest overall score is achieved by YOLOv12+CNN(97.15%accuracy),while SSD-MobileNet+CNN provides the best speed-efficiency trade-off for edge devices.This research provides valuable insights into selecting and deploying appropriate deep learning models for maintaining exam integrity under varying resource constraints.展开更多
The highly dynamic nature,strong uncertainty,and coupled multiple safety constraints inherent in carrier aircraft recovery operations pose severe challenges for real-time decision-making.Addressing bolter scenarios,th...The highly dynamic nature,strong uncertainty,and coupled multiple safety constraints inherent in carrier aircraft recovery operations pose severe challenges for real-time decision-making.Addressing bolter scenarios,this study proposes an intelligent decision-making framework based on a deep long short-term memory Q-network.This framework transforms the real-time sequencing for bolter recovery problem into a partially observable Markov decision process.It employs a stacked long shortterm memory network to accurately capture the long-range temporal dependencies of bolter event chains and fuel consumption.Furthermore,it integrates a prioritized experience replay training mechanism to construct a safe and adaptive scheduling system capable of millisecond-level real-time decision-making.Experimental demonstrates that,within large-scale mass recovery scenarios,the framework achieves zero safety violations in static environments and maintains a fuel safety violation rate below 10%in dynamic scenarios,with single-step decision times at the millisecond level.The model exhibits strong generalization capability,effectively responding to unforeseen emergent situations—such as multiple bolters and fuel emergencies—without requiring retraining.This provides robust support for efficient carrier-based aircraft recovery operations.展开更多
This paper presents an efficient recovery scheme suitable for real-time mainmemory database. In the recovery scheme, log records are stored in non-volatile RAM which is dividedinto four different partitions based on t...This paper presents an efficient recovery scheme suitable for real-time mainmemory database. In the recovery scheme, log records are stored in non-volatile RAM which is dividedinto four different partitions based on transaction types. Similarly, a main memory database isdivided into four partitions based data types. When the using ratio of log store area exceeds thethreshold value, checkpoint procedure is triggered. During executing checkpoint procedure, someuseless log records are deleted. During restart recovery after a crash, partition reloading policyis adopted to assure that critical data are reloaded and restored in advance, so that the databasesystem can be brought up before the entire database is reloaded into main memory. Therefore downtime is obvionsly reduced. Simulation experiments show our recovery scheme obviously improves thesystem performance, and does a favor to meet the dtadlints of real-time transactions.展开更多
A DMVOCC-MVDA （distributed multiversion optimistic concurrency control with multiversion dynamic adjustment） protocol was presented to process mobile distributed real-time transaction in mobile broadcast environment...A DMVOCC-MVDA （distributed multiversion optimistic concurrency control with multiversion dynamic adjustment） protocol was presented to process mobile distributed real-time transaction in mobile broadcast environments. At the mobile hosts, all transactions perform local pre-validation. The local pre-validation process is carried out against the committed transactions at the server in the last broadcast cycle. Transactions that survive in local pre-validation must be submitted to the server for local final validation. The new protocol eliminates conflicts between mobile read-only and mobile update transactions, and resolves data conflicts flexibly by using multiversion dynamic adjustment of serialization order to avoid unnecessary restarts of transactions. Mobile read-only transactions can be committed with no-blocking, and respond time of mobile read-only transactions is greatly shortened. The tolerance of mobile transactions of disconnections from the broadcast channel is increased. In global validation mobile distributed transactions have to do check to ensure distributed serializability in all participants. The simulation results show that the new concurrency control protocol proposed offers better performance than other protocols in terms of miss rate, restart rate, commit rate. Under high work load （think time is ls） the miss rate of DMVOCC-MVDA is only 14.6%, is significantly lower than that of other protocols. The restart rate of DMVOCC-MVDA is only 32.3%, showing that DMVOCC-MVDA can effectively reduce the restart rate of mobile transactions. And the commit rate of DMVOCC-MVDA is up to 61.2%, which is obviously higher than that of other protocols.展开更多
In parallel real-time database systems, concurrency control protocols must satisfy time constraints as well as the integrity constraints. The authors present a validation concurrency control(VCC) protocol, which can e...In parallel real-time database systems, concurrency control protocols must satisfy time constraints as well as the integrity constraints. The authors present a validation concurrency control(VCC) protocol, which can enhance the performance of real-time concurrency control mechanism by reducing the number of transactions that might miss their deadlines, and compare the performance of validation concurrency control protocol with that of HP2PL(High priority two phase locking) protocol and OCC-TI-WAIT-50(Optimistic concurrency control-time interval-wait-50) protocol under shared-disk architecture by simulation. The simulation results reveal that the protocol the author presented can effectively reduce the number of transactions restarting which might miss their deadlines and performs better than HP2PL and OCC-TI-WAIT-50. It works well when arrival rate of transaction is lesser than threshold. However, due to resource contention the percentage of missing deadline increases sharply when arrival rate is greater than the threshold.展开更多
Large portions of the tunnel boring machine(TBM)construction cost are attributed to disc cutter consumption,and assessing the disc cutter's wear level can help determine the optimal time to replace the disc cutter...Large portions of the tunnel boring machine(TBM)construction cost are attributed to disc cutter consumption,and assessing the disc cutter's wear level can help determine the optimal time to replace the disc cutter.Therefore,the need to monitor disc cutter wear in real-time has emerged as a technical challenge for TBMs.In this study,real-time disc cutter wear monitoring is developed based on sound and vibration sensors.For this purpose,the microphone and accelerometer were used to record the sound and vibration signals of cutting three different types of rocks with varying abrasions on a laboratory scale.The relationship between disc cutter wear and the sound and vibration signal was determined by comparing the measurements of disc cutter wear with the signal plots for each sample.The features extracted from the signals showed that the sound and vibration signals are impacted by the progression of disc wear during the rock-cutting process.The signal features obtained from the rock-cutting operation were utilized to verify the machine learning techniques.The results showed that the multilayer perceptron(MLP),random subspace-based decision tree(RS-DT),DT,and random forest(RF)methods could predict the wear level of the disc cutter with an accuracy of 0.89,0.951,0.951,and 0.927,respectively.Based on the accuracy of the models and the confusion matrix,it was found that the RS-DT model has the best estimate for predicting the level of disc wear.This research has developed a method that can potentially determine when to replace a tool and assess disc wear in real-time.展开更多
Recovery performance in the event of failures is very important for distributed real-time database systems. This paper presents a time-cognizant logging-based crash recovery scheme （TCLCRS） that aims at distributed ...Recovery performance in the event of failures is very important for distributed real-time database systems. This paper presents a time-cognizant logging-based crash recovery scheme （TCLCRS） that aims at distributed real-time databases, which adopts a main memory database as its ground support. In our scheme, each site maintains a real-time log for local transactions and the subtransactions, which execute at the site, and execte local checkpointing independently. Log records are stored in non-volatile high- speed store, which is divided into four different partitions based on transaction classes. During restart recovery after a site crash, partitioned crash recovery strategy is adopted to ensure that the site can be brought up before the entire local secondary database is reloaded in main memory. The partitioned crash recovery strategy not only guarantees the internal consistency to be recovered, but also guarantee the temporal consistency and recovery of the sates of physical world influenced by uncommitted transactions. Combined with two- phase commit protocol, TCLCRS can guarantee failure atomicity of distributed real-time transactions.展开更多
The Internet of Things(IoT)and mobile technology have significantly transformed healthcare by enabling real-time monitoring and diagnosis of patients.Recognizing Medical-Related Human Activities(MRHA)is pivotal for he...The Internet of Things(IoT)and mobile technology have significantly transformed healthcare by enabling real-time monitoring and diagnosis of patients.Recognizing Medical-Related Human Activities(MRHA)is pivotal for healthcare systems,particularly for identifying actions critical to patient well-being.However,challenges such as high computational demands,low accuracy,and limited adaptability persist in Human Motion Recognition(HMR).While some studies have integrated HMR with IoT for real-time healthcare applications,limited research has focused on recognizing MRHA as essential for effective patient monitoring.This study proposes a novel HMR method tailored for MRHA detection,leveraging multi-stage deep learning techniques integrated with IoT.The approach employs EfficientNet to extract optimized spatial features from skeleton frame sequences using seven Mobile Inverted Bottleneck Convolutions(MBConv)blocks,followed by Convolutional Long Short Term Memory(ConvLSTM)to capture spatio-temporal patterns.A classification module with global average pooling,a fully connected layer,and a dropout layer generates the final predictions.The model is evaluated on the NTU RGB+D 120 and HMDB51 datasets,focusing on MRHA such as sneezing,falling,walking,sitting,etc.It achieves 94.85%accuracy for cross-subject evaluations and 96.45%for cross-view evaluations on NTU RGB+D 120,along with 89.22%accuracy on HMDB51.Additionally,the system integrates IoT capabilities using a Raspberry Pi and GSM module,delivering real-time alerts via Twilios SMS service to caregivers and patients.This scalable and efficient solution bridges the gap between HMR and IoT,advancing patient monitoring,improving healthcare outcomes,and reducing costs.展开更多
This paper formally defines and analyses the new notion of correctness called quasi serializability, and then outlines corresponding concurrency control protocol QDHP for distributed real-time databases. Finally, thro...This paper formally defines and analyses the new notion of correctness called quasi serializability, and then outlines corresponding concurrency control protocol QDHP for distributed real-time databases. Finally, through a series of simulation studies, it shows that using the new concurrency control protocol the performance of distributed real-time databases can be much improved.展开更多
A distinctive feature of scholarly communities today is exploring topics and concepts in interdisciplinary and international contexts. This observation is increasingly apparent and visible in advancing our thinking an...A distinctive feature of scholarly communities today is exploring topics and concepts in interdisciplinary and international contexts. This observation is increasingly apparent and visible in advancing our thinking and policies related to human/environmental worlds at local, regional, and global scales. Maps are an important part of these innovative and ongoing research approaches. In this context, we consider urban forests a topic meriting more attention of scholars studying the geographic and environmental intersections of the natural sciences with the social sciences and humanities. We construct two innovative knowledge bases, one a conceptual framework based on major themes and concepts related to mapping urban forests using key words of the first 100 results of a Google Scholar query and a second using the number of Google Scholar hyperlinks about mapping urban forests in 244 capital cities. We discovered that the constructed world maps reveal vast global unevenness in our knowledge about urban forests in hyperlink numbers and ratios, results that merit further attention by disciplinary, international and interdisciplinary scholarly communities.展开更多
Along with process control,perception represents the main function performed by the Edge Layer of an Internet of Things(IoT)network.Many of these networks implement various applications where the response time does no...Along with process control,perception represents the main function performed by the Edge Layer of an Internet of Things(IoT)network.Many of these networks implement various applications where the response time does not represent an important parameter.However,in critical applications,this parameter represents a crucial aspect.One important sensing device used in IoT designs is the accelerometer.In most applications,the response time of the embedded driver software handling this device is generally not analysed and not taken into account.In this paper,we present the design and implementation of a predictable real-time driver stack for a popular accelerometer and gyroscope device family.We provide clear justifications for why this response time is extremely important for critical applications in the acquisition process of such data.We present extensive measurements and experimental results that demonstrate the predictability of our solution,making it suitable for critical real-time systems.展开更多
The characteristic databases in China face issues such as narrow resource coverage,low levels of standardization and normalization,and limited data sharing.To address these challenges,this paper proposes the concept o...The characteristic databases in China face issues such as narrow resource coverage,low levels of standardization and normalization,and limited data sharing.To address these challenges,this paper proposes the concept of characteristic databases alliance,using marine characteristic databases as a case for feasibility analysis and discussion.The paper outlines the development path for such alliances and offers recommendations for future growth,aiming to establish a collaborative platform for the development of characteristic databases.展开更多
Objectives:Electronic health records(EHRs)offer valuable real-world data(RWD)for Chinese medicine research.However,significant methodological challenges remain in developing integrative Chinese-Western medicine(ICWM)d...Objectives:Electronic health records(EHRs)offer valuable real-world data(RWD)for Chinese medicine research.However,significant methodological challenges remain in developing integrative Chinese-Western medicine(ICWM)databases.This study aims to establish a best-practice methodological framework,referred to as BRIDGE,to guide the construction of ICWM databases using EHRs.Methods:We developed the methodological framework through a comprehensive process,including systematic literature review,synthesis of empirical experiences,thematic expert discussions,and consultation with an external panel to reach consensus.Results:The BRIDGE framework outlines 6 core components for ICWM-EHR database development:Overall design,database architecture,data extraction and linkage,data governance,data verification,and data quality evaluation.Key data elements include variables related to study population,treatment or exposure,outcomes,and confounders.These databases support various research applications,particularly in evaluating the effectiveness and safety of integrative therapies.To demonstrate its practical value,we developed an ICWM-EHR database on women’s reproductive lifespan,encompassing 2,064,482 patients.This database captures women’s health conditions across the life course,from reproductive age to older adulthood.Conclusions:The BRIDGE methodological framework provides a standardized approach to building high-quality ICWM-EHR databases.It offers a unique opportunity to strengthen the methodological rigor and real-world relevance of Chinese medicine research in integrated healthcare settings.展开更多
The journal of Meteorological and Environmental Research[ISSN:2152-3940]has been included and stored by the following famous databases:CA,CABI,CSA,EBSCO,UPD,AGRIS,EA,Chinese Science and Technology Periodical Database,...The journal of Meteorological and Environmental Research[ISSN:2152-3940]has been included and stored by the following famous databases:CA,CABI,CSA,EBSCO,UPD,AGRIS,EA,Chinese Science and Technology Periodical Database,and CNKI,as well as Library of Congress,United States.展开更多
The journal of Meteorological and Environmental Research [ISSN: 2152-3940] has been included and stored by the following famous databases: CA, CABI, CSA, EBSCO, UPD, AGRIS, EA, Chinese Science and Technology Periodica...The journal of Meteorological and Environmental Research [ISSN: 2152-3940] has been included and stored by the following famous databases: CA, CABI, CSA, EBSCO, UPD, AGRIS, EA, Chinese Science and Technology Periodical Database, and CNKI, as well as Library of Congress, United States.展开更多
基金supported by the National Institute of Health(R37CA240806,U01CA288351,and R50CA283816)support from UCI Chao Family Comprehensive Cancer Center(P30CA062203).
文摘Electroacoustic Tomography(EAT)is an imaging technique that detects ultrasound waves induced by electrical pulses,offering a solution for real-time electroporation monitoring.This study presents EAT system using a dual-frequency ultrasound array.The broadband nature of electroacoustic signals requires ultrasound detector to cover both the high-frequency range(around 6MHz)signals generated by small targets and the low-frequency range(around 1MHz)signals generated by large targets.In our EAT system,we use the 6 MHz array to detect high-frequency signals from the electrodes,and the 1 MHz array for the electrical field.To test this,we conducted simulations using COMSOL Multiphysics^(®) and MATLAB's k-Wave toolbox,followed by experiments using a custom-built setup with a dual-frequency transducer and real-time data acquisition.The results demonstrated that the dual-frequency EAT system could accurately and simultaneously monitor the electroporation process,effectively showing both the treatment area and electrode placement with the application of 1 kV electric pulses with 100 ns duration.The axial resolution of the 6MHz array for EAT was 0.45 mm,significantly better than the 2mm resolution achieved with the 1MHz array.These findings validate the potential of dual-frequency EAT as a superior method for real-time electroporation monitoring.
基金the support of the Major Science and Technology Project of Yunnan Province,China(Grant No.202502AD080007)the National Natural Science Foundation of China(Grant No.52378288)。
文摘Vehicle-induced response separation is a crucial issue in structural health monitoring(SHM).This paper proposes a block-wise sliding recursive wavelet transform algorithm to meet the real-time processing requirements of monitoring data.To extend the separation target from a fixed dataset to a continuously updating data stream,a block-wise sliding framework is first developed.This framework is further optimized considering the characteristics of real-time data streams,and its advantage in computational efficiency is theoretically demonstrated.During the decomposition and reconstruction processes,information from neighboring data blocks is fully utilized to reduce algorithmic complexity.In addition,a delay-setting strategy is introduced for each processing window to mitigate boundary effects,thereby balancing accuracy and efficiency.Simulated signal experiments are conducted to determine the optimal delay configuration and to verify the algorithm’s superior performance,achieving a lower Root Mean Square Error(RMSE)and only 0.0249 times the average computational time compared with the original algorithm.Furthermore,strain signals from the Lieshi River Bridge are employed to validate the method.The proposed algorithm successfully separates the static trend from vehicle-induced responses in real time across different sampling frequencies,demonstrating its effectiveness and applicability in real-time bridge monitoring.
基金supported by the National Natural Science Foundation of China(Grant No.42077244)the Postgraduate Research&Practice Innovation Program of Jiangsu Province(Grant No.KYCX24_0434).
文摘To investigate the energy relief effect of real-time drilling in preventing rockburst in high-stress rock,a series of high-stress real-time drilling uniaxial compression tests were conducted on red sandstone specimens using the SG4500 drilling rig.Results showed that the mechanical behavior(i.e.peak strength and rockburst intensity)of the rock was weakened under high-stress real-time drilling and exhibited a downward trend as the drilling diameter increased.The real-time drilling energy dissipation index(ERD)was proposed to characterize the energy relief during high-stress real-time drilling.The ERD exhibited a linear increase with the real-time drilling diameter.Furthermore,the elastic strain energy of post-drilling rock showed a linear relationship with the square of stress across different stress levels,which also applied to the peak elastic strain energy and the square of peak stress.This findingreveals the intrinsic link between the weakening effect of peak elastic strain energy and peak strength due to high-stress real-time drilling,confirmingthe consistency between energy relief and pressure relief effects.By establishing relationships among rockburst proneness,peak elastic strain energy,and peak strength,it was demonstrated that high-stress real-time drilling reduces rockburst proneness through energy dissipation.Specifically,both peak elastic strain energy and rockburst proneness decreased with larger drill bit diameters,consistent with reductions in peak strength,rockburst intensity,and fractal dimensions of high-stress real-time drilled rock.These results validate the energy relief mechanism of real-time drilling in mitigating rockburst risks.
基金support of the National Natural Science Foundation of China(No.52274176)the Guangdong Province Key Areas R&D Program(No.2022B0101070001)+5 种基金Chongqing Elite Innovation and Entrepreneurship Leading talent Project(No.CQYC20220302517)the Chongqing Natural Science Foundation Innovation and Development Joint Fund(No.CSTB2022NSCQ-LZX0079)the National Key Research and Development Program Young Scientists Project(No.2022YFC2905700)the Chongqing Municipal Education Commission“Shuangcheng Economic Circle Construction in Chengdu-Chongqing Area”Science and Technology Innovation Project(No.KJCX2020031)the Fundamental Research Funds for the Central Universities(No.2024CDJGF-009)the Key Project for Technological Innovation and Application Development in Chongqing(No.CSTB2025TIAD-KPX0029).
文摘An innovative real-time monitoring method for surrounding rock damage based on microseismic time-lapse double-difference tomography is proposed for delayed dynamic damage identification and insufficient detection of adverse geological conditions in deep-buried tunnel construction.The installation techniques for microseismic sensors were optimized by mounting sensors at bolt ends which significantly improves signal-to-noise ratio(SNR)and anti-interference capability compared to conventional borehole placement.Subsequently,a 3D wave velocity evolution model that incorporates construction-induced disturbances was established,enabling the first visualization of spatiotemporal variations in surrounding rock wave velocity.It finds significant wave velocity reduction near the tunnel face,with roof and floor damage zones extending 40–50 m;wave velocities approaching undisturbed levels at 15 m ahead of the working face and on the laterally undisturbed side;pronounced spatial asymmetry in wave velocity distribution—values on the left side exceed those on the right,with a clear stress concentration or transition zone located 10–15 m;and systematically lower velocities behind the face than in front,indicating asymmetric rock damage development.These results provide essential theoretical support and practical guidance for optimizing dynamic construction strategies,enabling real-time adjustment of support parameters,and establishing safety early warning systems in deep-buried tunnel engineering.
文摘Online examinations have become a dominant assessment mode,increasing concerns over academic integrity.To address the critical challenge of detecting cheating behaviours,this study proposes a hybrid deep learning approach that combines visual detection and temporal behaviour classification.The methodology utilises object detection models—You Only Look Once(YOLOv12),Faster Region-based Convolutional Neural Network(RCNN),and Single Shot Detector(SSD)MobileNet—integrated with classification models such as Convolutional Neural Networks(CNN),Bidirectional Gated Recurrent Unit(Bi-GRU),and CNN-LSTM(Long Short-Term Memory).Two distinct datasets were used:the Online Exam Proctoring(EOP)dataset from Michigan State University and the School of Computer Science,Duy Tan Unievrsity(SCS-DTU)dataset collected in a controlled classroom setting.A diverse set of cheating behaviours,including book usage,unauthorised interaction,internet access,and mobile phone use,was categorised.Comprehensive experiments evaluated the models based on accuracy,precision,recall,training time,inference speed,and memory usage.We evaluate nine detector-classifier pairings under a unified budget and score them via a calibrated harmonic mean of detection and classification accuracies,enabling deployment-oriented selection under latency and memory constraints.Macro-Precision/Recall/F1 and Receiver Operating Characteristic-Area Under the Curve(ROC-AUC)are reported for the top configurations,revealing consistent advantages of object-centric pipelines for fine-grained cheating cues.The highest overall score is achieved by YOLOv12+CNN(97.15%accuracy),while SSD-MobileNet+CNN provides the best speed-efficiency trade-off for edge devices.This research provides valuable insights into selecting and deploying appropriate deep learning models for maintaining exam integrity under varying resource constraints.
基金supported by the National Natural Science Foundation of China(Grant No.62403486)。
文摘The highly dynamic nature,strong uncertainty,and coupled multiple safety constraints inherent in carrier aircraft recovery operations pose severe challenges for real-time decision-making.Addressing bolter scenarios,this study proposes an intelligent decision-making framework based on a deep long short-term memory Q-network.This framework transforms the real-time sequencing for bolter recovery problem into a partially observable Markov decision process.It employs a stacked long shortterm memory network to accurately capture the long-range temporal dependencies of bolter event chains and fuel consumption.Furthermore,it integrates a prioritized experience replay training mechanism to construct a safe and adaptive scheduling system capable of millisecond-level real-time decision-making.Experimental demonstrates that,within large-scale mass recovery scenarios,the framework achieves zero safety violations in static environments and maintains a fuel safety violation rate below 10%in dynamic scenarios,with single-step decision times at the millisecond level.The model exhibits strong generalization capability,effectively responding to unforeseen emergent situations—such as multiple bolters and fuel emergencies—without requiring retraining.This provides robust support for efficient carrier-based aircraft recovery operations.
文摘This paper presents an efficient recovery scheme suitable for real-time mainmemory database. In the recovery scheme, log records are stored in non-volatile RAM which is dividedinto four different partitions based on transaction types. Similarly, a main memory database isdivided into four partitions based data types. When the using ratio of log store area exceeds thethreshold value, checkpoint procedure is triggered. During executing checkpoint procedure, someuseless log records are deleted. During restart recovery after a crash, partition reloading policyis adopted to assure that critical data are reloaded and restored in advance, so that the databasesystem can be brought up before the entire database is reloaded into main memory. Therefore downtime is obvionsly reduced. Simulation experiments show our recovery scheme obviously improves thesystem performance, and does a favor to meet the dtadlints of real-time transactions.
基金Project(20030533011)supported by the National Research Foundation for the Doctoral Program of Higher Education of China
文摘A DMVOCC-MVDA （distributed multiversion optimistic concurrency control with multiversion dynamic adjustment） protocol was presented to process mobile distributed real-time transaction in mobile broadcast environments. At the mobile hosts, all transactions perform local pre-validation. The local pre-validation process is carried out against the committed transactions at the server in the last broadcast cycle. Transactions that survive in local pre-validation must be submitted to the server for local final validation. The new protocol eliminates conflicts between mobile read-only and mobile update transactions, and resolves data conflicts flexibly by using multiversion dynamic adjustment of serialization order to avoid unnecessary restarts of transactions. Mobile read-only transactions can be committed with no-blocking, and respond time of mobile read-only transactions is greatly shortened. The tolerance of mobile transactions of disconnections from the broadcast channel is increased. In global validation mobile distributed transactions have to do check to ensure distributed serializability in all participants. The simulation results show that the new concurrency control protocol proposed offers better performance than other protocols in terms of miss rate, restart rate, commit rate. Under high work load （think time is ls） the miss rate of DMVOCC-MVDA is only 14.6%, is significantly lower than that of other protocols. The restart rate of DMVOCC-MVDA is only 32.3%, showing that DMVOCC-MVDA can effectively reduce the restart rate of mobile transactions. And the commit rate of DMVOCC-MVDA is up to 61.2%, which is obviously higher than that of other protocols.
文摘In parallel real-time database systems, concurrency control protocols must satisfy time constraints as well as the integrity constraints. The authors present a validation concurrency control(VCC) protocol, which can enhance the performance of real-time concurrency control mechanism by reducing the number of transactions that might miss their deadlines, and compare the performance of validation concurrency control protocol with that of HP2PL(High priority two phase locking) protocol and OCC-TI-WAIT-50(Optimistic concurrency control-time interval-wait-50) protocol under shared-disk architecture by simulation. The simulation results reveal that the protocol the author presented can effectively reduce the number of transactions restarting which might miss their deadlines and performs better than HP2PL and OCC-TI-WAIT-50. It works well when arrival rate of transaction is lesser than threshold. However, due to resource contention the percentage of missing deadline increases sharply when arrival rate is greater than the threshold.
文摘Large portions of the tunnel boring machine(TBM)construction cost are attributed to disc cutter consumption,and assessing the disc cutter's wear level can help determine the optimal time to replace the disc cutter.Therefore,the need to monitor disc cutter wear in real-time has emerged as a technical challenge for TBMs.In this study,real-time disc cutter wear monitoring is developed based on sound and vibration sensors.For this purpose,the microphone and accelerometer were used to record the sound and vibration signals of cutting three different types of rocks with varying abrasions on a laboratory scale.The relationship between disc cutter wear and the sound and vibration signal was determined by comparing the measurements of disc cutter wear with the signal plots for each sample.The features extracted from the signals showed that the sound and vibration signals are impacted by the progression of disc wear during the rock-cutting process.The signal features obtained from the rock-cutting operation were utilized to verify the machine learning techniques.The results showed that the multilayer perceptron(MLP),random subspace-based decision tree(RS-DT),DT,and random forest(RF)methods could predict the wear level of the disc cutter with an accuracy of 0.89,0.951,0.951,and 0.927,respectively.Based on the accuracy of the models and the confusion matrix,it was found that the RS-DT model has the best estimate for predicting the level of disc wear.This research has developed a method that can potentially determine when to replace a tool and assess disc wear in real-time.
基金Project supported by National Natural Science Foundation ofChina (Grant No .60203017) Defense Pre-research Projectof the"Tenth Five-Year-Plan"of China (Grant No .413150403)
文摘Recovery performance in the event of failures is very important for distributed real-time database systems. This paper presents a time-cognizant logging-based crash recovery scheme （TCLCRS） that aims at distributed real-time databases, which adopts a main memory database as its ground support. In our scheme, each site maintains a real-time log for local transactions and the subtransactions, which execute at the site, and execte local checkpointing independently. Log records are stored in non-volatile high- speed store, which is divided into four different partitions based on transaction classes. During restart recovery after a site crash, partitioned crash recovery strategy is adopted to ensure that the site can be brought up before the entire local secondary database is reloaded in main memory. The partitioned crash recovery strategy not only guarantees the internal consistency to be recovered, but also guarantee the temporal consistency and recovery of the sates of physical world influenced by uncommitted transactions. Combined with two- phase commit protocol, TCLCRS can guarantee failure atomicity of distributed real-time transactions.
基金funded by the ICT Division of theMinistry of Posts,Telecommunications,and Information Technology of Bangladesh under Grant Number 56.00.0000.052.33.005.21-7(Tracking No.22FS15306)support from the University of Rajshahi.
文摘The Internet of Things(IoT)and mobile technology have significantly transformed healthcare by enabling real-time monitoring and diagnosis of patients.Recognizing Medical-Related Human Activities(MRHA)is pivotal for healthcare systems,particularly for identifying actions critical to patient well-being.However,challenges such as high computational demands,low accuracy,and limited adaptability persist in Human Motion Recognition(HMR).While some studies have integrated HMR with IoT for real-time healthcare applications,limited research has focused on recognizing MRHA as essential for effective patient monitoring.This study proposes a novel HMR method tailored for MRHA detection,leveraging multi-stage deep learning techniques integrated with IoT.The approach employs EfficientNet to extract optimized spatial features from skeleton frame sequences using seven Mobile Inverted Bottleneck Convolutions(MBConv)blocks,followed by Convolutional Long Short Term Memory(ConvLSTM)to capture spatio-temporal patterns.A classification module with global average pooling,a fully connected layer,and a dropout layer generates the final predictions.The model is evaluated on the NTU RGB+D 120 and HMDB51 datasets,focusing on MRHA such as sneezing,falling,walking,sitting,etc.It achieves 94.85%accuracy for cross-subject evaluations and 96.45%for cross-view evaluations on NTU RGB+D 120,along with 89.22%accuracy on HMDB51.Additionally,the system integrates IoT capabilities using a Raspberry Pi and GSM module,delivering real-time alerts via Twilios SMS service to caregivers and patients.This scalable and efficient solution bridges the gap between HMR and IoT,advancing patient monitoring,improving healthcare outcomes,and reducing costs.
基金the National Natural Science Foundation of China and the Commission of Science,Technokgy and Industry for National Defense
文摘This paper formally defines and analyses the new notion of correctness called quasi serializability, and then outlines corresponding concurrency control protocol QDHP for distributed real-time databases. Finally, through a series of simulation studies, it shows that using the new concurrency control protocol the performance of distributed real-time databases can be much improved.
文摘A distinctive feature of scholarly communities today is exploring topics and concepts in interdisciplinary and international contexts. This observation is increasingly apparent and visible in advancing our thinking and policies related to human/environmental worlds at local, regional, and global scales. Maps are an important part of these innovative and ongoing research approaches. In this context, we consider urban forests a topic meriting more attention of scholars studying the geographic and environmental intersections of the natural sciences with the social sciences and humanities. We construct two innovative knowledge bases, one a conceptual framework based on major themes and concepts related to mapping urban forests using key words of the first 100 results of a Google Scholar query and a second using the number of Google Scholar hyperlinks about mapping urban forests in 244 capital cities. We discovered that the constructed world maps reveal vast global unevenness in our knowledge about urban forests in hyperlink numbers and ratios, results that merit further attention by disciplinary, international and interdisciplinary scholarly communities.
文摘Along with process control,perception represents the main function performed by the Edge Layer of an Internet of Things(IoT)network.Many of these networks implement various applications where the response time does not represent an important parameter.However,in critical applications,this parameter represents a crucial aspect.One important sensing device used in IoT designs is the accelerometer.In most applications,the response time of the embedded driver software handling this device is generally not analysed and not taken into account.In this paper,we present the design and implementation of a predictable real-time driver stack for a popular accelerometer and gyroscope device family.We provide clear justifications for why this response time is extremely important for critical applications in the acquisition process of such data.We present extensive measurements and experimental results that demonstrate the predictability of our solution,making it suitable for critical real-time systems.
文摘The characteristic databases in China face issues such as narrow resource coverage,low levels of standardization and normalization,and limited data sharing.To address these challenges,this paper proposes the concept of characteristic databases alliance,using marine characteristic databases as a case for feasibility analysis and discussion.The paper outlines the development path for such alliances and offers recommendations for future growth,aiming to establish a collaborative platform for the development of characteristic databases.
基金supported by the National Key Research&Development Program of China(No.2024YFC3505800)the National Natural Science Foundation of China(Nos.82474334,82474335 and 72174132)+3 种基金National Science Fund for Distinguished Young Scholars(No.82225049)the Key Research&Development Projects of Sichuan Provincial Department of Science and Technology(Nos.2024YFFK0174 and 2024YFFK0152)1.3.5 Project for Disciplines of Excellence,West China Hospital,Sichuan University(Nos.ZYYC24010 and ZYGD23004)the Special Fund for Traditional Chinese Medicine of Sichuan Provincial Administration of Traditional Chinese Medicine(No.2024zd023).
文摘Objectives:Electronic health records(EHRs)offer valuable real-world data(RWD)for Chinese medicine research.However,significant methodological challenges remain in developing integrative Chinese-Western medicine(ICWM)databases.This study aims to establish a best-practice methodological framework,referred to as BRIDGE,to guide the construction of ICWM databases using EHRs.Methods:We developed the methodological framework through a comprehensive process,including systematic literature review,synthesis of empirical experiences,thematic expert discussions,and consultation with an external panel to reach consensus.Results:The BRIDGE framework outlines 6 core components for ICWM-EHR database development:Overall design,database architecture,data extraction and linkage,data governance,data verification,and data quality evaluation.Key data elements include variables related to study population,treatment or exposure,outcomes,and confounders.These databases support various research applications,particularly in evaluating the effectiveness and safety of integrative therapies.To demonstrate its practical value,we developed an ICWM-EHR database on women’s reproductive lifespan,encompassing 2,064,482 patients.This database captures women’s health conditions across the life course,from reproductive age to older adulthood.Conclusions:The BRIDGE methodological framework provides a standardized approach to building high-quality ICWM-EHR databases.It offers a unique opportunity to strengthen the methodological rigor and real-world relevance of Chinese medicine research in integrated healthcare settings.
文摘The journal of Meteorological and Environmental Research[ISSN:2152-3940]has been included and stored by the following famous databases:CA,CABI,CSA,EBSCO,UPD,AGRIS,EA,Chinese Science and Technology Periodical Database,and CNKI,as well as Library of Congress,United States.
文摘The journal of Meteorological and Environmental Research [ISSN: 2152-3940] has been included and stored by the following famous databases: CA, CABI, CSA, EBSCO, UPD, AGRIS, EA, Chinese Science and Technology Periodical Database, and CNKI, as well as Library of Congress, United States.
