An innovative real-time monitoring method for surrounding rock damage based on microseismic time-lapse double-difference tomography is proposed for delayed dynamic damage identification and insufficient detection of a...An innovative real-time monitoring method for surrounding rock damage based on microseismic time-lapse double-difference tomography is proposed for delayed dynamic damage identification and insufficient detection of adverse geological conditions in deep-buried tunnel construction.The installation techniques for microseismic sensors were optimized by mounting sensors at bolt ends which significantly improves signal-to-noise ratio(SNR)and anti-interference capability compared to conventional borehole placement.Subsequently,a 3D wave velocity evolution model that incorporates construction-induced disturbances was established,enabling the first visualization of spatiotemporal variations in surrounding rock wave velocity.It finds significant wave velocity reduction near the tunnel face,with roof and floor damage zones extending 40–50 m;wave velocities approaching undisturbed levels at 15 m ahead of the working face and on the laterally undisturbed side;pronounced spatial asymmetry in wave velocity distribution—values on the left side exceed those on the right,with a clear stress concentration or transition zone located 10–15 m;and systematically lower velocities behind the face than in front,indicating asymmetric rock damage development.These results provide essential theoretical support and practical guidance for optimizing dynamic construction strategies,enabling real-time adjustment of support parameters,and establishing safety early warning systems in deep-buried tunnel engineering.展开更多
A common method for monitoring seawater quality involves collecting samples periodically and analyzing them in a laboratory.This method presents several challenges such as transportation of samples,limited access to t...A common method for monitoring seawater quality involves collecting samples periodically and analyzing them in a laboratory.This method presents several challenges such as transportation of samples,limited access to testing areas,high costs,and non-instantaneous tests.In this paper,a new Wireless Sensor Network(WSN)based seawater quality monitoring(SQM)system is designed and constructed to observe the seawater parameters that are indicative of marine pollution such as pH,electrical conductivity,temperature,and turbidity,along with geospatial data in real-time.It consists of one master node and several portable sensor nodes that are deployed at different locations on the sea surface.The IEEE 802.15.4 communication standard is utilized between master node and sensor nodes using star topology,while GSM/GPRS is used to connect the master node to a remote server.Collected data from the sensor nodes can be instantly viewed on data grids,graphics,and a map via both a developed web application and a hybrid mobile application.Additionally,the data can be filtered by different parameters and downloaded in spreadsheet format for integration with geographical information systems.After calibrating the sensors,experimental tests were conducted off the coast of Antalya Kucuk Calticak Bay over two separate periods totaling 14 d with only a 2%data loss.Furthermore,a verification test was performed for the sensors,where R-squared values ranged between 0.7 and 1.0,indicating a high correlation between sensor node data and standard instrument data.展开更多
Here,a novel real-time monitoring sensor that integrates the oxidation of peroxymonosulfate(PMS)and the in situ monitoring of the pollutant degradation process is proposed.Briefly,FeCo@carbon fiber(FeCo@CF)was utilize...Here,a novel real-time monitoring sensor that integrates the oxidation of peroxymonosulfate(PMS)and the in situ monitoring of the pollutant degradation process is proposed.Briefly,FeCo@carbon fiber(FeCo@CF)was utilized as the anode electrode,while graphite rods served as the cathode electrode in assembling the galvanic cell.The FeCo@CF electrode exhibited rapid reactivity with PMS,generating reactive oxygen species that efficiently degrade organic pollutants.The degradation experiments indicate that complete bisphenol A(BPA)degradation was achieved within 10 min under optimal conditions.The real-time electrochemical signal was measured in time during the catalytic reaction,and a linear relationship between BPA concentration and the real-time charge(Q)was confirmed by the equation ln(C0/C)=4.393Q(correlation coefficients,R^(2)=0.998).Furthermore,experiments conducted with aureomycin and tetracycline further validated the effectiveness of the monitoring sensor.First-principles investigation confirmed the superior adsorption energy and improved electron transfer in FeCo@CF.The integration of pollutant degradation with in situ monitoring of catalytic reactions offers promising prospects for expanding the scope of the monitoring of catalytic processes and making significant contributions to environmental purification.展开更多
Combining the background of modern construction engineering site safety management,this article analyzes the real-time monitoring and alarm strategies for site construction safety under the integration of BIM and AI.T...Combining the background of modern construction engineering site safety management,this article analyzes the real-time monitoring and alarm strategies for site construction safety under the integration of BIM and AI.This includes the analysis of BIM and AI technologies and their integration advantages,real-time monitoring and alarm strategies for construction site safety based on BIM and AI integration,as well as the development direction of BIM and AI integration in real-time monitoring and alarm for construction site safety.It is hoped that through this analysis,a scientific reference can be provided for the digital and intelligent management of construction site safety,promoting the digital and intelligent development of its safety management work.展开更多
The various bioacoustics signals obtained with auscultation contain complex clinical information that has been traditionally used as biomarkers,however,they are not extensively used in clinical studies owing to their ...The various bioacoustics signals obtained with auscultation contain complex clinical information that has been traditionally used as biomarkers,however,they are not extensively used in clinical studies owing to their spatiotemporal limitations.In this study,we developed a wearable stethoscope for wireless,skinattachable,low-power,continuous,real-time auscultation using a lung-sound-monitoring-patch(LSMP).LSMP can monitor respiratory function through a mobile app and classify normal and adventitious breathing by comparing their unique acoustic characteristics.The human heart and breathing sounds from humans can be distinguished from complex sound signals consisting of a mixture of bioacoustic signals and external noise.The performance of the LSMP sensor was further demonstrated in pediatric patients with asthma and elderly chronic obstructive pulmonary disease(COPD)patients where wheezing sounds were classified at specific frequencies.In addition,we developed a novel method for counting wheezing events based on a two-dimensional convolutional neural network deep-learning model constructed de novo and trained with our augmented fundamental lung-sound data set.We implemented a counting algorithm to identify wheezing events in real-time regardless of the respiratory cycle.The artificial intelligence-based adventitious breathing event counter distinguished>80%of the events(especially wheezing)in long-term clinical applications in patients with COPD.展开更多
The Internet of Things technology provides a comprehensive solution for the real-time monitoring of cold chain logistics by integrating sensors,wireless communication,cloud computing,and big data analysis.Based on thi...The Internet of Things technology provides a comprehensive solution for the real-time monitoring of cold chain logistics by integrating sensors,wireless communication,cloud computing,and big data analysis.Based on this,this paper deeply explores the overview and characteristics of the Internet of Things technology,the feasibility analysis of the Internet of Things technology in the cold chain logistics monitoring,the application analysis of the Internet of Things technology in the cold chain logistics real-time monitoring to better improve the management level and operational efficiency of the cold chain logistics,to provide consumers with safer and fresh products.展开更多
As global climate change intensifies,the power industry-a major source of carbon emissions-plays a pivotal role in achieving carbon peaking and neutrality goals through its low-carbon transition.Traditional power pla...As global climate change intensifies,the power industry-a major source of carbon emissions-plays a pivotal role in achieving carbon peaking and neutrality goals through its low-carbon transition.Traditional power plants’carbon management systems can no longer meet the demands of high-precision,real-time monitoring.Smart power plants now offer innovative solutions for carbon emission tracking and intelligent analysis by integrating IoT,big data,and AI technologies.Current research predominantly focuses on optimizing individual processes,lacking systematic exploration of comprehensive dynamic monitoring and intelligent decision-making across the entire workflow.To address this gap,we propose a smart carbon emission monitoring and analysis platform for power plants that integrates IoT sensing,multimodal data analytics,and AI-driven decision-making.The platform establishes a multi-source sensor network to collect emissions data throughout the fuel combustion,auxiliary equipment operation,and waste treatment processes.Combining carbon emission factor analysis with machine learning models enables real-time emission calculations and utilizes long short-term memory networks to predict future emission trends.展开更多
Acetylcholinesterase(AChE)plays a crucial role in the activities of the nervous system,and its abnormal function can lead to the occurrence and development of neurodegenerative diseases.Hence,an effective method for r...Acetylcholinesterase(AChE)plays a crucial role in the activities of the nervous system,and its abnormal function can lead to the occurrence and development of neurodegenerative diseases.Hence,an effective method for real-time monitoring of AChE activity is essential.Very recently,several fluorescence sensors have been developed for the detection of AChE activity,but they are usually imaging in the visible region,relatively small Stokes shifts,or long response times,limiting their application for real-time monitoring in vivo.Inspired by that,a near-infrared(NIR)off-on probe((E)-4-(2-(4-(dicyanomethylene)-4H-chromen-2-yl)vinyl)phenyl dimethylcarbamate,DCM-N)for AChE monitoring with high selectivity and sensitivity is developed.In the probeDCM-N,a bright near-infrared fluorescence emission at 700 nmcan be triggered by AChE through the cleavage of amino ester bond in DCM-N,and the resulting fluorescence exhibits a good linear relationship with AChE activity in the range of 0.2e16 U/mL,with a detection limit as low as 0.06 U/mL.For real plasma sample detection,DCM-N demonstrates advantages of accurate detection and fast response compared to the traditional Ellman assay for AChE detection.Moreover,DCM-N can be used for imaging of AChE activity in live cells and tracking of AChE activity in zebrafish models,which is of great significance for medical and physiological research related to AChE.DCM-N possesses several notable features such as light-up NIR emission,fast response,large spectral shifts and strong photostability under physiological conditions.These features enable it to monitor AChE activity both in vivo and in vitro,providing a suitable tool for real-time monitoring and in vivo visualization of AChE activity.展开更多
Predicting the mechanical behaviors of structure and perceiving the anomalies in advance are essential to ensuring the safe operation of infrastructures in the long run.In addition to the incomplete consideration of i...Predicting the mechanical behaviors of structure and perceiving the anomalies in advance are essential to ensuring the safe operation of infrastructures in the long run.In addition to the incomplete consideration of influencing factors,the prediction time scale of existing studies is rough.Therefore,this study focuses on the development of a real-time prediction model by coupling the spatio-temporal correlation with external load through autoencoder network(ATENet)based on structural health monitoring(SHM)data.An autoencoder mechanism is performed to acquire the high-level representation of raw monitoring data at different spatial positions,and the recurrent neural network is applied to understanding the temporal correlation from the time series.Then,the obtained temporal-spatial information is coupled with dynamic loads through a fully connected layer to predict structural performance in next 12 h.As a case study,the proposed model is formulated on the SHM data collected from a representative underwater shield tunnel.The robustness study is carried out to verify the reliability and the prediction capability of the proposed model.Finally,the ATENet model is compared with some typical models,and the results indicate that it has the best performance.ATENet model is of great value to predict the realtime evolution trend of tunnel structure.展开更多
The application and development of a wide-area measurement system(WAMS)has enabled many applications and led to several requirements based on dynamic measurement data.Such data are transmitted as big data information ...The application and development of a wide-area measurement system(WAMS)has enabled many applications and led to several requirements based on dynamic measurement data.Such data are transmitted as big data information flow.To ensure effective transmission of wide-frequency electrical information by the communication protocol of a WAMS,this study performs real-time traffic monitoring and analysis of the data network of a power information system,and establishes corresponding network optimization strategies to solve existing transmission problems.This study utilizes the traffic analysis results obtained using the current real-time dynamic monitoring system to design an optimization strategy,covering the optimization in three progressive levels:the underlying communication protocol,source data,and transmission process.Optimization of the system structure and scheduling optimization of data information are validated to be feasible and practical via tests.展开更多
In order to ensure the safety,quality and efficiency of computer numerical control(CNC)machine tool processing,a real-time monitoring and visible solution for CNC machine tools based on hyper text markup language(HTML...In order to ensure the safety,quality and efficiency of computer numerical control(CNC)machine tool processing,a real-time monitoring and visible solution for CNC machine tools based on hyper text markup language(HTML)5 is proposed.The characteristics of the real-time monitoring technology of CNC machine tools under the traditional Client/Server(C/S)structure are compared and analyzed,and the technical drawbacks are proposed.Web real-time communication technology and browser drawing technology are deeply studied.A real-time monitoring and visible system for CNC machine tool data is developed based on Metro platform,combining WebSocket real-time communication technology and Canvas drawing technology.The system architecture is given,and the functions and implementation methods of the system are described in detail.The practical application results show that the WebSocket real-time communication technology can effectively reduce the bandwidth and network delay and save server resources.The numerical control machine data monitoring system can intuitively reflect the machine data,and the visible effect is good.It realizes timely monitoring of equipment alarms and prompts maintenance and management personnel.展开更多
Real-time health data monitoring is pivotal for bolstering road services’safety,intelligence,and efficiency within the Internet of Health Things(IoHT)framework.Yet,delays in data retrieval can markedly hinder the eff...Real-time health data monitoring is pivotal for bolstering road services’safety,intelligence,and efficiency within the Internet of Health Things(IoHT)framework.Yet,delays in data retrieval can markedly hinder the efficacy of big data awareness detection systems.We advocate for a collaborative caching approach involving edge devices and cloud networks to combat this.This strategy is devised to streamline the data retrieval path,subsequently diminishing network strain.Crafting an adept cache processing scheme poses its own set of challenges,especially given the transient nature of monitoring data and the imperative for swift data transmission,intertwined with resource allocation tactics.This paper unveils a novel mobile healthcare solution that harnesses the power of our collaborative caching approach,facilitating nuanced health monitoring via edge devices.The system capitalizes on cloud computing for intricate health data analytics,especially in pinpointing health anomalies.Given the dynamic locational shifts and possible connection disruptions,we have architected a hierarchical detection system,particularly during crises.This system caches data efficiently and incorporates a detection utility to assess data freshness and potential lag in response times.Furthermore,we introduce the Cache-Assisted Real-Time Detection(CARD)model,crafted to optimize utility.Addressing the inherent complexity of the NP-hard CARD model,we have championed a greedy algorithm as a solution.Simulations reveal that our collaborative caching technique markedly elevates the Cache Hit Ratio(CHR)and data freshness,outshining its contemporaneous benchmark algorithms.The empirical results underscore the strength and efficiency of our innovative IoHT-based health monitoring solution.To encapsulate,this paper tackles the nuances of real-time health data monitoring in the IoHT landscape,presenting a joint edge-cloud caching strategy paired with a hierarchical detection system.Our methodology yields enhanced cache efficiency and data freshness.The corroborative numerical data accentuates the feasibility and relevance of our model,casting a beacon for the future trajectory of real-time health data monitoring systems.展开更多
A new system called alternate data acquisition and real-time monitoring system has been developed for long-time discharge in tokamak operation. It can support continuous on-line data acquisition at a high sampling rat...A new system called alternate data acquisition and real-time monitoring system has been developed for long-time discharge in tokamak operation. It can support continuous on-line data acquisition at a high sampling rate and a graphic display of the plasma parameters during the discharge. Thus operators can monitor and control the plasma state in real time. An application of this system has been demonstrated on the HT-7 tokamak.展开更多
Real-time monitoring and forecast of large scale active population density is of great significance as it can warn and prevent possible public safety accident caused by abnormal population aggregation.Active populatio...Real-time monitoring and forecast of large scale active population density is of great significance as it can warn and prevent possible public safety accident caused by abnormal population aggregation.Active population is defined as the number of people with their mobile phone powered on.Recently,an unfortunate deadly stampede occurred in Shanghai on December 31th 2014 causing the death of 39 people.We hope that our research can help avoid similar unfortunate accident from happening.In this paper we propose a method for active population density real-time monitoring and forecasting based on data from mobile network operators.Our method is based solely on mobile network operators existing infrastructure and barely requires extra investment,and mobile devices play a very limited role in the process of population locating.Four series forecasting methods,namely Simple Exponential Smoothing(SES),Double exponential smoothing(DES),Triple exponential smoothing(TES)and Autoregressive integrated moving average(ARIMA)are used in our experiments.Our experimental results suggest that we can achieve good forecast result for 135 min in future.展开更多
To optimize the self-organization network, self-adaptation, real-time monitoring, remote management capability, and equipment reuse level of the meteorological station supporting the portable groundwater circulation w...To optimize the self-organization network, self-adaptation, real-time monitoring, remote management capability, and equipment reuse level of the meteorological station supporting the portable groundwater circulation wells, and to provide real-time and effective technical services and environmental data support for groundwater remediation, a real-time monitoring system design of the meteorological station supporting the portable groundwater circulation wells based on the existing equipment is proposed. A variety of environmental element information is collected and transmitted to the embedded web server by the intelligent weather transmitter, and then processed by the algorithm and stored internally, displayed locally, and published on the web. The system monitoring algorithm and user interface are designed in the CNWSCADA development environment to realize real-time processing and analysis of environmental data and monitoring, control, management, and maintenance of the system status. The PLC-controlled photovoltaic power generating panels and lithium battery packs are in line with the concept of energy saving and emission reduction, and at the same time, as an emergency power supply to guarantee the safety of equipment and data when the utility power fails to meet the requirements. The experiment proves that the system has the characteristics of remote control, real-time interaction, simple station deployment, reliable operation, convenient maintenance, and green environment protection, which is conducive to improving the comprehensive utilization efficiency of various types of environmental information and providing reliable data support, theoretical basis and guidance suggestions for the research of groundwater remediation technology and its disciplines, and the research and development of the movable groundwater cycling well monitoring system.展开更多
The monitoring of soil moisture content in paddy field is one of important parts and contents of regional soil moisture monitoring. But a good monitoring scheme hasn’t been established. A real-time monitoring scheme ...The monitoring of soil moisture content in paddy field is one of important parts and contents of regional soil moisture monitoring. But a good monitoring scheme hasn’t been established. A real-time monitoring scheme of soil moisture content in paddy field was put forward from two key links of soil moisture content monitoring and field water-layer monitoring. This scheme could meet the alternative monitoring requirements of soil moisture content in water layer and none-water layer. It had a good maneuverability and could provide references for practical work.展开更多
Vehicle-induced response separation is a crucial issue in structural health monitoring(SHM).This paper proposes a block-wise sliding recursive wavelet transform algorithm to meet the real-time processing requirements ...Vehicle-induced response separation is a crucial issue in structural health monitoring(SHM).This paper proposes a block-wise sliding recursive wavelet transform algorithm to meet the real-time processing requirements of monitoring data.To extend the separation target from a fixed dataset to a continuously updating data stream,a block-wise sliding framework is first developed.This framework is further optimized considering the characteristics of real-time data streams,and its advantage in computational efficiency is theoretically demonstrated.During the decomposition and reconstruction processes,information from neighboring data blocks is fully utilized to reduce algorithmic complexity.In addition,a delay-setting strategy is introduced for each processing window to mitigate boundary effects,thereby balancing accuracy and efficiency.Simulated signal experiments are conducted to determine the optimal delay configuration and to verify the algorithm’s superior performance,achieving a lower Root Mean Square Error(RMSE)and only 0.0249 times the average computational time compared with the original algorithm.Furthermore,strain signals from the Lieshi River Bridge are employed to validate the method.The proposed algorithm successfully separates the static trend from vehicle-induced responses in real time across different sampling frequencies,demonstrating its effectiveness and applicability in real-time bridge monitoring.展开更多
Online examinations have become a dominant assessment mode,increasing concerns over academic integrity.To address the critical challenge of detecting cheating behaviours,this study proposes a hybrid deep learning appr...Online examinations have become a dominant assessment mode,increasing concerns over academic integrity.To address the critical challenge of detecting cheating behaviours,this study proposes a hybrid deep learning approach that combines visual detection and temporal behaviour classification.The methodology utilises object detection models—You Only Look Once(YOLOv12),Faster Region-based Convolutional Neural Network(RCNN),and Single Shot Detector(SSD)MobileNet—integrated with classification models such as Convolutional Neural Networks(CNN),Bidirectional Gated Recurrent Unit(Bi-GRU),and CNN-LSTM(Long Short-Term Memory).Two distinct datasets were used:the Online Exam Proctoring(EOP)dataset from Michigan State University and the School of Computer Science,Duy Tan Unievrsity(SCS-DTU)dataset collected in a controlled classroom setting.A diverse set of cheating behaviours,including book usage,unauthorised interaction,internet access,and mobile phone use,was categorised.Comprehensive experiments evaluated the models based on accuracy,precision,recall,training time,inference speed,and memory usage.We evaluate nine detector-classifier pairings under a unified budget and score them via a calibrated harmonic mean of detection and classification accuracies,enabling deployment-oriented selection under latency and memory constraints.Macro-Precision/Recall/F1 and Receiver Operating Characteristic-Area Under the Curve(ROC-AUC)are reported for the top configurations,revealing consistent advantages of object-centric pipelines for fine-grained cheating cues.The highest overall score is achieved by YOLOv12+CNN(97.15%accuracy),while SSD-MobileNet+CNN provides the best speed-efficiency trade-off for edge devices.This research provides valuable insights into selecting and deploying appropriate deep learning models for maintaining exam integrity under varying resource constraints.展开更多
The composite material layering process has attracted considerable attention due to its production advantages,including high scalability and compatibility with a wide range of raw materials.However,changes in process ...The composite material layering process has attracted considerable attention due to its production advantages,including high scalability and compatibility with a wide range of raw materials.However,changes in process conditions can lead to degradation in layer quality and non-uniformity,highlighting the need for real-time monitoring to improve overall quality and efficiency.In this study,an AI-based monitoring system was developed to evaluate layer width and assess quality in real time.Three deep learning models Faster Region-based Convolutional Neural Network(R-CNN),You Only Look Once version 8(YOLOv8),and Single Shot MultiBox Detector(SSD)were compared,and YOLOv8 was ultimately selected for its superior speed,flexibility,and scalability.The selected model was integrated into a user-friendly interface.To verify the reliability of the system,bead width control experiments were conducted,which identified feed speed and extrusion speed as the key process parameters.Accordingly,a Central Composite Design(CCD)experimental plan with 13 conditions was applied to evaluate layer width and validate the system’s reliability.Finally,the proposed system was applied to the additive manufacturing of an aerospace component,where it successfully detected bead width deviations during printing and enabled stable fabrication with a maximum geometric deviation of approximately 6 mm.These findings demonstrate the critical role of real-time monitoring of layer width and quality in improving process stability and final product quality in composite material additive manufacturing.展开更多
The aerostatic spindle is a key component of ultra-precision machine tools,and its error motion is crucial to machining accuracy and reliability.Spindle error motion is unavoidable,and its online monitoring and predic...The aerostatic spindle is a key component of ultra-precision machine tools,and its error motion is crucial to machining accuracy and reliability.Spindle error motion is unavoidable,and its online monitoring and prediction are quite important.Currently,there are relatively few studies on the online monitoring and prediction methods for the aerostatic spindle,and the level of intelligence is relatively low.To address this problem,an error motion monitoring system based on digital twin(DT)technology was established for the aerostatic spindle.A spindle error motion prediction method based on a mechanism and data fusion model(MDFM)was proposed.Additionally,a highly available and interactive aerostatic spindle DT service platform was developed.Experimental results have verified the good performance of this platform.The platform facilitates interaction between the physical and virtual entities of the aerostatic spindle,enabling three-dimensional visualization,monitoring,prediction,and simulation of spindle error motion,and shows good potential for engineering applications.展开更多
基金support of the National Natural Science Foundation of China(No.52274176)the Guangdong Province Key Areas R&D Program(No.2022B0101070001)+5 种基金Chongqing Elite Innovation and Entrepreneurship Leading talent Project(No.CQYC20220302517)the Chongqing Natural Science Foundation Innovation and Development Joint Fund(No.CSTB2022NSCQ-LZX0079)the National Key Research and Development Program Young Scientists Project(No.2022YFC2905700)the Chongqing Municipal Education Commission“Shuangcheng Economic Circle Construction in Chengdu-Chongqing Area”Science and Technology Innovation Project(No.KJCX2020031)the Fundamental Research Funds for the Central Universities(No.2024CDJGF-009)the Key Project for Technological Innovation and Application Development in Chongqing(No.CSTB2025TIAD-KPX0029).
文摘An innovative real-time monitoring method for surrounding rock damage based on microseismic time-lapse double-difference tomography is proposed for delayed dynamic damage identification and insufficient detection of adverse geological conditions in deep-buried tunnel construction.The installation techniques for microseismic sensors were optimized by mounting sensors at bolt ends which significantly improves signal-to-noise ratio(SNR)and anti-interference capability compared to conventional borehole placement.Subsequently,a 3D wave velocity evolution model that incorporates construction-induced disturbances was established,enabling the first visualization of spatiotemporal variations in surrounding rock wave velocity.It finds significant wave velocity reduction near the tunnel face,with roof and floor damage zones extending 40–50 m;wave velocities approaching undisturbed levels at 15 m ahead of the working face and on the laterally undisturbed side;pronounced spatial asymmetry in wave velocity distribution—values on the left side exceed those on the right,with a clear stress concentration or transition zone located 10–15 m;and systematically lower velocities behind the face than in front,indicating asymmetric rock damage development.These results provide essential theoretical support and practical guidance for optimizing dynamic construction strategies,enabling real-time adjustment of support parameters,and establishing safety early warning systems in deep-buried tunnel engineering.
基金The Scientific Research Projects Coordination Unit of Akdeniz University(Türkiye)under contract No.FBA-2022-5542.
文摘A common method for monitoring seawater quality involves collecting samples periodically and analyzing them in a laboratory.This method presents several challenges such as transportation of samples,limited access to testing areas,high costs,and non-instantaneous tests.In this paper,a new Wireless Sensor Network(WSN)based seawater quality monitoring(SQM)system is designed and constructed to observe the seawater parameters that are indicative of marine pollution such as pH,electrical conductivity,temperature,and turbidity,along with geospatial data in real-time.It consists of one master node and several portable sensor nodes that are deployed at different locations on the sea surface.The IEEE 802.15.4 communication standard is utilized between master node and sensor nodes using star topology,while GSM/GPRS is used to connect the master node to a remote server.Collected data from the sensor nodes can be instantly viewed on data grids,graphics,and a map via both a developed web application and a hybrid mobile application.Additionally,the data can be filtered by different parameters and downloaded in spreadsheet format for integration with geographical information systems.After calibrating the sensors,experimental tests were conducted off the coast of Antalya Kucuk Calticak Bay over two separate periods totaling 14 d with only a 2%data loss.Furthermore,a verification test was performed for the sensors,where R-squared values ranged between 0.7 and 1.0,indicating a high correlation between sensor node data and standard instrument data.
基金supported by the National Natural Science Foundation of China(No.22306076)the Natural Science Foundation of Jiangsu Province(No.BK20230676)the Natural Science Foundation of Jiangsu Higher Education Institutions of China(No.22KJB610011).
文摘Here,a novel real-time monitoring sensor that integrates the oxidation of peroxymonosulfate(PMS)and the in situ monitoring of the pollutant degradation process is proposed.Briefly,FeCo@carbon fiber(FeCo@CF)was utilized as the anode electrode,while graphite rods served as the cathode electrode in assembling the galvanic cell.The FeCo@CF electrode exhibited rapid reactivity with PMS,generating reactive oxygen species that efficiently degrade organic pollutants.The degradation experiments indicate that complete bisphenol A(BPA)degradation was achieved within 10 min under optimal conditions.The real-time electrochemical signal was measured in time during the catalytic reaction,and a linear relationship between BPA concentration and the real-time charge(Q)was confirmed by the equation ln(C0/C)=4.393Q(correlation coefficients,R^(2)=0.998).Furthermore,experiments conducted with aureomycin and tetracycline further validated the effectiveness of the monitoring sensor.First-principles investigation confirmed the superior adsorption energy and improved electron transfer in FeCo@CF.The integration of pollutant degradation with in situ monitoring of catalytic reactions offers promising prospects for expanding the scope of the monitoring of catalytic processes and making significant contributions to environmental purification.
基金“Research on AI-Intelligent Management Technology for Construction Safety Based on BIM Technology and Smart Construction Site Scenarios”(Project No.:KJQN202401904)“Research on Intelligent Monitoring System for Construction Quality and Safety Based on BIM and AI Technologies”(Project No.:202412608006)。
文摘Combining the background of modern construction engineering site safety management,this article analyzes the real-time monitoring and alarm strategies for site construction safety under the integration of BIM and AI.This includes the analysis of BIM and AI technologies and their integration advantages,real-time monitoring and alarm strategies for construction site safety based on BIM and AI integration,as well as the development direction of BIM and AI integration in real-time monitoring and alarm for construction site safety.It is hoped that through this analysis,a scientific reference can be provided for the digital and intelligent management of construction site safety,promoting the digital and intelligent development of its safety management work.
基金supported by the Korea Environment Industry&Technology Institute(KEITI)through Digital Infrastructure Building Project for Monitoring,Surveying and Evaluating the Environmental Health program,funded by the Korea Ministry of Environment(MOE)(2021003330008)supported by the KIST Internal program(2E32851)+1 种基金supported by the Korea Health Technology Research and Development(R&D)Project through the Korea Health Industry Development Institute(KHIDI)and Korea Dementia Research Center(KDRC),funded by the Ministry of Health&Welfare and Ministry of Science and ICT,Republic of Korea(HU20C0164)the Basic Science Research Program through the National Research Foundation of Korea(NRF)funded by the Ministry of Education(2022R1A6A3A01087298)。
文摘The various bioacoustics signals obtained with auscultation contain complex clinical information that has been traditionally used as biomarkers,however,they are not extensively used in clinical studies owing to their spatiotemporal limitations.In this study,we developed a wearable stethoscope for wireless,skinattachable,low-power,continuous,real-time auscultation using a lung-sound-monitoring-patch(LSMP).LSMP can monitor respiratory function through a mobile app and classify normal and adventitious breathing by comparing their unique acoustic characteristics.The human heart and breathing sounds from humans can be distinguished from complex sound signals consisting of a mixture of bioacoustic signals and external noise.The performance of the LSMP sensor was further demonstrated in pediatric patients with asthma and elderly chronic obstructive pulmonary disease(COPD)patients where wheezing sounds were classified at specific frequencies.In addition,we developed a novel method for counting wheezing events based on a two-dimensional convolutional neural network deep-learning model constructed de novo and trained with our augmented fundamental lung-sound data set.We implemented a counting algorithm to identify wheezing events in real-time regardless of the respiratory cycle.The artificial intelligence-based adventitious breathing event counter distinguished>80%of the events(especially wheezing)in long-term clinical applications in patients with COPD.
文摘The Internet of Things technology provides a comprehensive solution for the real-time monitoring of cold chain logistics by integrating sensors,wireless communication,cloud computing,and big data analysis.Based on this,this paper deeply explores the overview and characteristics of the Internet of Things technology,the feasibility analysis of the Internet of Things technology in the cold chain logistics monitoring,the application analysis of the Internet of Things technology in the cold chain logistics real-time monitoring to better improve the management level and operational efficiency of the cold chain logistics,to provide consumers with safer and fresh products.
文摘As global climate change intensifies,the power industry-a major source of carbon emissions-plays a pivotal role in achieving carbon peaking and neutrality goals through its low-carbon transition.Traditional power plants’carbon management systems can no longer meet the demands of high-precision,real-time monitoring.Smart power plants now offer innovative solutions for carbon emission tracking and intelligent analysis by integrating IoT,big data,and AI technologies.Current research predominantly focuses on optimizing individual processes,lacking systematic exploration of comprehensive dynamic monitoring and intelligent decision-making across the entire workflow.To address this gap,we propose a smart carbon emission monitoring and analysis platform for power plants that integrates IoT sensing,multimodal data analytics,and AI-driven decision-making.The platform establishes a multi-source sensor network to collect emissions data throughout the fuel combustion,auxiliary equipment operation,and waste treatment processes.Combining carbon emission factor analysis with machine learning models enables real-time emission calculations and utilizes long short-term memory networks to predict future emission trends.
基金supported by Jiangsu Innovation Team Program,China,National Natural Science Foundation of China(Grant Nos.:82204339,82473884,82122066,and 81973291)National Key Research and Development Program of Ministry of China(Grant No.:2022YFC2704603)+1 种基金the“Dawn”program of Shanghai Education Commission,China(Grant No.:22SG34)Natural Science Foundation of Sichuan Province of China(Grant No.:2023NSFSC1902).
文摘Acetylcholinesterase(AChE)plays a crucial role in the activities of the nervous system,and its abnormal function can lead to the occurrence and development of neurodegenerative diseases.Hence,an effective method for real-time monitoring of AChE activity is essential.Very recently,several fluorescence sensors have been developed for the detection of AChE activity,but they are usually imaging in the visible region,relatively small Stokes shifts,or long response times,limiting their application for real-time monitoring in vivo.Inspired by that,a near-infrared(NIR)off-on probe((E)-4-(2-(4-(dicyanomethylene)-4H-chromen-2-yl)vinyl)phenyl dimethylcarbamate,DCM-N)for AChE monitoring with high selectivity and sensitivity is developed.In the probeDCM-N,a bright near-infrared fluorescence emission at 700 nmcan be triggered by AChE through the cleavage of amino ester bond in DCM-N,and the resulting fluorescence exhibits a good linear relationship with AChE activity in the range of 0.2e16 U/mL,with a detection limit as low as 0.06 U/mL.For real plasma sample detection,DCM-N demonstrates advantages of accurate detection and fast response compared to the traditional Ellman assay for AChE detection.Moreover,DCM-N can be used for imaging of AChE activity in live cells and tracking of AChE activity in zebrafish models,which is of great significance for medical and physiological research related to AChE.DCM-N possesses several notable features such as light-up NIR emission,fast response,large spectral shifts and strong photostability under physiological conditions.These features enable it to monitor AChE activity both in vivo and in vitro,providing a suitable tool for real-time monitoring and in vivo visualization of AChE activity.
基金This work is supported by the National Natural Science Foundation of China(Grant No.51991392)Key Deployment Projects of Chinese Academy of Sciences(Grant No.ZDRW-ZS-2021-3-3)the Second Tibetan Plateau Scientific Expedition and Research Program(STEP)(Grant No.2019QZKK0904).
文摘Predicting the mechanical behaviors of structure and perceiving the anomalies in advance are essential to ensuring the safe operation of infrastructures in the long run.In addition to the incomplete consideration of influencing factors,the prediction time scale of existing studies is rough.Therefore,this study focuses on the development of a real-time prediction model by coupling the spatio-temporal correlation with external load through autoencoder network(ATENet)based on structural health monitoring(SHM)data.An autoencoder mechanism is performed to acquire the high-level representation of raw monitoring data at different spatial positions,and the recurrent neural network is applied to understanding the temporal correlation from the time series.Then,the obtained temporal-spatial information is coupled with dynamic loads through a fully connected layer to predict structural performance in next 12 h.As a case study,the proposed model is formulated on the SHM data collected from a representative underwater shield tunnel.The robustness study is carried out to verify the reliability and the prediction capability of the proposed model.Finally,the ATENet model is compared with some typical models,and the results indicate that it has the best performance.ATENet model is of great value to predict the realtime evolution trend of tunnel structure.
文摘The application and development of a wide-area measurement system(WAMS)has enabled many applications and led to several requirements based on dynamic measurement data.Such data are transmitted as big data information flow.To ensure effective transmission of wide-frequency electrical information by the communication protocol of a WAMS,this study performs real-time traffic monitoring and analysis of the data network of a power information system,and establishes corresponding network optimization strategies to solve existing transmission problems.This study utilizes the traffic analysis results obtained using the current real-time dynamic monitoring system to design an optimization strategy,covering the optimization in three progressive levels:the underlying communication protocol,source data,and transmission process.Optimization of the system structure and scheduling optimization of data information are validated to be feasible and practical via tests.
文摘In order to ensure the safety,quality and efficiency of computer numerical control(CNC)machine tool processing,a real-time monitoring and visible solution for CNC machine tools based on hyper text markup language(HTML)5 is proposed.The characteristics of the real-time monitoring technology of CNC machine tools under the traditional Client/Server(C/S)structure are compared and analyzed,and the technical drawbacks are proposed.Web real-time communication technology and browser drawing technology are deeply studied.A real-time monitoring and visible system for CNC machine tool data is developed based on Metro platform,combining WebSocket real-time communication technology and Canvas drawing technology.The system architecture is given,and the functions and implementation methods of the system are described in detail.The practical application results show that the WebSocket real-time communication technology can effectively reduce the bandwidth and network delay and save server resources.The numerical control machine data monitoring system can intuitively reflect the machine data,and the visible effect is good.It realizes timely monitoring of equipment alarms and prompts maintenance and management personnel.
基金supported by National Natural Science Foundation of China(NSFC)under Grant Number T2350710232.
文摘Real-time health data monitoring is pivotal for bolstering road services’safety,intelligence,and efficiency within the Internet of Health Things(IoHT)framework.Yet,delays in data retrieval can markedly hinder the efficacy of big data awareness detection systems.We advocate for a collaborative caching approach involving edge devices and cloud networks to combat this.This strategy is devised to streamline the data retrieval path,subsequently diminishing network strain.Crafting an adept cache processing scheme poses its own set of challenges,especially given the transient nature of monitoring data and the imperative for swift data transmission,intertwined with resource allocation tactics.This paper unveils a novel mobile healthcare solution that harnesses the power of our collaborative caching approach,facilitating nuanced health monitoring via edge devices.The system capitalizes on cloud computing for intricate health data analytics,especially in pinpointing health anomalies.Given the dynamic locational shifts and possible connection disruptions,we have architected a hierarchical detection system,particularly during crises.This system caches data efficiently and incorporates a detection utility to assess data freshness and potential lag in response times.Furthermore,we introduce the Cache-Assisted Real-Time Detection(CARD)model,crafted to optimize utility.Addressing the inherent complexity of the NP-hard CARD model,we have championed a greedy algorithm as a solution.Simulations reveal that our collaborative caching technique markedly elevates the Cache Hit Ratio(CHR)and data freshness,outshining its contemporaneous benchmark algorithms.The empirical results underscore the strength and efficiency of our innovative IoHT-based health monitoring solution.To encapsulate,this paper tackles the nuances of real-time health data monitoring in the IoHT landscape,presenting a joint edge-cloud caching strategy paired with a hierarchical detection system.Our methodology yields enhanced cache efficiency and data freshness.The corroborative numerical data accentuates the feasibility and relevance of our model,casting a beacon for the future trajectory of real-time health data monitoring systems.
基金Meg-science Program of the Chinese Academy of Sciences (No. 19981303)
文摘A new system called alternate data acquisition and real-time monitoring system has been developed for long-time discharge in tokamak operation. It can support continuous on-line data acquisition at a high sampling rate and a graphic display of the plasma parameters during the discharge. Thus operators can monitor and control the plasma state in real time. An application of this system has been demonstrated on the HT-7 tokamak.
文摘Real-time monitoring and forecast of large scale active population density is of great significance as it can warn and prevent possible public safety accident caused by abnormal population aggregation.Active population is defined as the number of people with their mobile phone powered on.Recently,an unfortunate deadly stampede occurred in Shanghai on December 31th 2014 causing the death of 39 people.We hope that our research can help avoid similar unfortunate accident from happening.In this paper we propose a method for active population density real-time monitoring and forecasting based on data from mobile network operators.Our method is based solely on mobile network operators existing infrastructure and barely requires extra investment,and mobile devices play a very limited role in the process of population locating.Four series forecasting methods,namely Simple Exponential Smoothing(SES),Double exponential smoothing(DES),Triple exponential smoothing(TES)and Autoregressive integrated moving average(ARIMA)are used in our experiments.Our experimental results suggest that we can achieve good forecast result for 135 min in future.
文摘To optimize the self-organization network, self-adaptation, real-time monitoring, remote management capability, and equipment reuse level of the meteorological station supporting the portable groundwater circulation wells, and to provide real-time and effective technical services and environmental data support for groundwater remediation, a real-time monitoring system design of the meteorological station supporting the portable groundwater circulation wells based on the existing equipment is proposed. A variety of environmental element information is collected and transmitted to the embedded web server by the intelligent weather transmitter, and then processed by the algorithm and stored internally, displayed locally, and published on the web. The system monitoring algorithm and user interface are designed in the CNWSCADA development environment to realize real-time processing and analysis of environmental data and monitoring, control, management, and maintenance of the system status. The PLC-controlled photovoltaic power generating panels and lithium battery packs are in line with the concept of energy saving and emission reduction, and at the same time, as an emergency power supply to guarantee the safety of equipment and data when the utility power fails to meet the requirements. The experiment proves that the system has the characteristics of remote control, real-time interaction, simple station deployment, reliable operation, convenient maintenance, and green environment protection, which is conducive to improving the comprehensive utilization efficiency of various types of environmental information and providing reliable data support, theoretical basis and guidance suggestions for the research of groundwater remediation technology and its disciplines, and the research and development of the movable groundwater cycling well monitoring system.
文摘The monitoring of soil moisture content in paddy field is one of important parts and contents of regional soil moisture monitoring. But a good monitoring scheme hasn’t been established. A real-time monitoring scheme of soil moisture content in paddy field was put forward from two key links of soil moisture content monitoring and field water-layer monitoring. This scheme could meet the alternative monitoring requirements of soil moisture content in water layer and none-water layer. It had a good maneuverability and could provide references for practical work.
基金the support of the Major Science and Technology Project of Yunnan Province,China(Grant No.202502AD080007)the National Natural Science Foundation of China(Grant No.52378288)。
文摘Vehicle-induced response separation is a crucial issue in structural health monitoring(SHM).This paper proposes a block-wise sliding recursive wavelet transform algorithm to meet the real-time processing requirements of monitoring data.To extend the separation target from a fixed dataset to a continuously updating data stream,a block-wise sliding framework is first developed.This framework is further optimized considering the characteristics of real-time data streams,and its advantage in computational efficiency is theoretically demonstrated.During the decomposition and reconstruction processes,information from neighboring data blocks is fully utilized to reduce algorithmic complexity.In addition,a delay-setting strategy is introduced for each processing window to mitigate boundary effects,thereby balancing accuracy and efficiency.Simulated signal experiments are conducted to determine the optimal delay configuration and to verify the algorithm’s superior performance,achieving a lower Root Mean Square Error(RMSE)and only 0.0249 times the average computational time compared with the original algorithm.Furthermore,strain signals from the Lieshi River Bridge are employed to validate the method.The proposed algorithm successfully separates the static trend from vehicle-induced responses in real time across different sampling frequencies,demonstrating its effectiveness and applicability in real-time bridge monitoring.
文摘Online examinations have become a dominant assessment mode,increasing concerns over academic integrity.To address the critical challenge of detecting cheating behaviours,this study proposes a hybrid deep learning approach that combines visual detection and temporal behaviour classification.The methodology utilises object detection models—You Only Look Once(YOLOv12),Faster Region-based Convolutional Neural Network(RCNN),and Single Shot Detector(SSD)MobileNet—integrated with classification models such as Convolutional Neural Networks(CNN),Bidirectional Gated Recurrent Unit(Bi-GRU),and CNN-LSTM(Long Short-Term Memory).Two distinct datasets were used:the Online Exam Proctoring(EOP)dataset from Michigan State University and the School of Computer Science,Duy Tan Unievrsity(SCS-DTU)dataset collected in a controlled classroom setting.A diverse set of cheating behaviours,including book usage,unauthorised interaction,internet access,and mobile phone use,was categorised.Comprehensive experiments evaluated the models based on accuracy,precision,recall,training time,inference speed,and memory usage.We evaluate nine detector-classifier pairings under a unified budget and score them via a calibrated harmonic mean of detection and classification accuracies,enabling deployment-oriented selection under latency and memory constraints.Macro-Precision/Recall/F1 and Receiver Operating Characteristic-Area Under the Curve(ROC-AUC)are reported for the top configurations,revealing consistent advantages of object-centric pipelines for fine-grained cheating cues.The highest overall score is achieved by YOLOv12+CNN(97.15%accuracy),while SSD-MobileNet+CNN provides the best speed-efficiency trade-off for edge devices.This research provides valuable insights into selecting and deploying appropriate deep learning models for maintaining exam integrity under varying resource constraints.
基金support of the Korea Institute of Industrial Technol-ogy as“Development of a remote manufacturing system for high-risk,high-difficulty pipe production processes”(kitech EH-25-0004)supported by the Technology Innovation Program(or Industrial Strategic Technology Development Program)(RS-2023–00237714+2 种基金Development of Dynamic Metrology Tool for CMP Process StabilizationRS-2025–02634755Development of Real-Time Electrical Fire Prevention System Technology Reflecting the Characteristics of Traditional Markets)funded by the Ministry of Trade,Industry&Energy(MOTIE,Republic of Korea).
文摘The composite material layering process has attracted considerable attention due to its production advantages,including high scalability and compatibility with a wide range of raw materials.However,changes in process conditions can lead to degradation in layer quality and non-uniformity,highlighting the need for real-time monitoring to improve overall quality and efficiency.In this study,an AI-based monitoring system was developed to evaluate layer width and assess quality in real time.Three deep learning models Faster Region-based Convolutional Neural Network(R-CNN),You Only Look Once version 8(YOLOv8),and Single Shot MultiBox Detector(SSD)were compared,and YOLOv8 was ultimately selected for its superior speed,flexibility,and scalability.The selected model was integrated into a user-friendly interface.To verify the reliability of the system,bead width control experiments were conducted,which identified feed speed and extrusion speed as the key process parameters.Accordingly,a Central Composite Design(CCD)experimental plan with 13 conditions was applied to evaluate layer width and validate the system’s reliability.Finally,the proposed system was applied to the additive manufacturing of an aerospace component,where it successfully detected bead width deviations during printing and enabled stable fabrication with a maximum geometric deviation of approximately 6 mm.These findings demonstrate the critical role of real-time monitoring of layer width and quality in improving process stability and final product quality in composite material additive manufacturing.
基金supported by the National Natural Science Foundation of China(Grant No.52475494),the Zhejiang Provincial Natural Science Foundation of China(Grant No.LY22E050003),the Fundamental Research Funds for the Provincial Universities of Zhejiang(Grant No.RF-A2020005).
文摘The aerostatic spindle is a key component of ultra-precision machine tools,and its error motion is crucial to machining accuracy and reliability.Spindle error motion is unavoidable,and its online monitoring and prediction are quite important.Currently,there are relatively few studies on the online monitoring and prediction methods for the aerostatic spindle,and the level of intelligence is relatively low.To address this problem,an error motion monitoring system based on digital twin(DT)technology was established for the aerostatic spindle.A spindle error motion prediction method based on a mechanism and data fusion model(MDFM)was proposed.Additionally,a highly available and interactive aerostatic spindle DT service platform was developed.Experimental results have verified the good performance of this platform.The platform facilitates interaction between the physical and virtual entities of the aerostatic spindle,enabling three-dimensional visualization,monitoring,prediction,and simulation of spindle error motion,and shows good potential for engineering applications.
