Considering characteristic of mHealth communication and problems of existing methods, this paper presents a real-time communication method for mHealth based on extended XMPP protocol. The method can maintain the role ...Considering characteristic of mHealth communication and problems of existing methods, this paper presents a real-time communication method for mHealth based on extended XMPP protocol. The method can maintain the role status efficiently and reduce data latency during the communication process. Meanwhile, it can be extended flexibly to meet increasing communication demands of mHealth services. Furthermore, a system framework is presented to support telemonitoring scene. Finally, system implementation and feasibility tests verify the effectiveness of the method and framework.展开更多
In consultative committee for space data systems(CCSDS)file delivery protocol(CFDP)recommendation of reliable transmission,there are no detail transmission procedure and delay calculation of prompted negative acknowle...In consultative committee for space data systems(CCSDS)file delivery protocol(CFDP)recommendation of reliable transmission,there are no detail transmission procedure and delay calculation of prompted negative acknowledge and asynchronous negative acknowledge models.CFDP is designed to provide data and storage management,story and forward,custody transfer and reliable end-to-end delivery over deep space characterized by huge latency,intermittent link,asymmetric bandwidth and big bit error rate(BER).Four reliable transmission models are analyzed and an expected file-delivery time is calculated with different trans-mission rates,numbers and sizes of packet data units,BERs and frequencies of external events,etc.By comparison of four CFDP models,the requirement of BER for typical missions in deep space is obtained and rules of choosing CFDP models under different uplink state informations are given,which provides references for protocol models selection,utilization and modification.展开更多
With the flexible deployment and high mobility of Unmanned Aerial Vehicles(UAVs)in an open environment,they have generated con-siderable attention in military and civil applications intending to enable ubiquitous conn...With the flexible deployment and high mobility of Unmanned Aerial Vehicles(UAVs)in an open environment,they have generated con-siderable attention in military and civil applications intending to enable ubiquitous connectivity and foster agile communications.The difficulty stems from features other than mobile ad-hoc network(MANET),namely aerial mobility in three-dimensional space and often changing topology.In the UAV network,a single node serves as a forwarding,transmitting,and receiving node at the same time.Typically,the communication path is multi-hop,and routing significantly affects the network’s performance.A lot of effort should be invested in performance analysis for selecting the optimum routing system.With this motivation,this study modelled a new Coati Optimization Algorithm-based Energy-Efficient Routing Process for Unmanned Aerial Vehicle Communication(COAER-UAVC)technique.The presented COAER-UAVC technique establishes effective routes for communication between the UAVs.It is primarily based on the coati characteristics in nature:if attacking and hunting iguanas and escaping from predators.Besides,the presented COAER-UAVC technique concentrates on the design of fitness functions to minimize energy utilization and communication delay.A varied group of simulations was performed to depict the optimum performance of the COAER-UAVC system.The experimental results verified that the COAER-UAVC technique had assured improved performance over other approaches.展开更多
Deep space communication has its own features such as long propagation delays,heavy noise,asymmetric link rates,and intermittent connectivity in space,therefore TCP/IP protocol cannot perform as well as it does in ter...Deep space communication has its own features such as long propagation delays,heavy noise,asymmetric link rates,and intermittent connectivity in space,therefore TCP/IP protocol cannot perform as well as it does in terrestrial communications.Accordingly,the Consultative Committee for Space Data Systems(CCSDS) developed CCSDS File Delivery Protocol(CFDP),which sets standards of efficient file delivery service capable of transferring files to and from mass memory located in the space segment.In CFDP,four optional acknowledge modes are supported to make the communication more reliable.In this paper,we gave a general introduction of typical communication process in CFDP and analysis of its four Negative Acknowledgement(NAK) modes on the respect of file delivery delay and times of retransmission.We found out that despite the shortest file delivery delay,immediate NAK mode suffers from the problem that frequent retransmission may probably lead to network congestion.Thus,we proposed a new mode,the error counter-based NAK mode.By simulation of the case focused on the link between a deep space probe on Mars and a ter-restrial station on Earth,we concluded that error counter-based NAK mode has successfully reduced the retransmission times at negligible cost of certain amount of file delivery delay.展开更多
The traditional software development model commonly named “waterfall” is unable to cope with the increasing functionality and complexity of modern embedded systems. In addition, it is unable to support the ability f...The traditional software development model commonly named “waterfall” is unable to cope with the increasing functionality and complexity of modern embedded systems. In addition, it is unable to support the ability for businesses to quickly respond to new market opportunities due to changing requirements. As a response, the software development community developed the Agile Methodologies (e.g., extreme Programming, Scrum) which were also adopted by the Embedded System community. However, failures and bad experiences in applying Agile Methodologies to the development of embedded systems have not been reported in the literature. Therefore, this paper contributes a detailed account of our first-time experiences adopting an agile approach in the prototype development of a wireless environment data acquisition system in an academic environment. We successfully applied a subset of the extreme Programming (XP) methodology to our software development using the Python programming language, an experience that demonstrated its benefits in shaping the design of the software and also increasing productivity. We used an incremental development approach for the hardware components and adopted a “cumulative testing” approach. For the overall development process management, however, we concluded that the Promise/Commitment-Based Project Management (PB-PM/CBPM) was better suited. We discovered that software and hardware components of embedded systems are best developed in parallel or near-parallel. We learned that software components that pass automated tests may not survive in the tests against the hardware. Throughout this rapid prototyping effort, factors like team size and our availability as graduate students were major obstacles to fully apply the XP methodology.展开更多
The simulation techniques of hardware-in-loop simulation(HLS) of homing antitank missile based on the personal computer (PC) are discussed. The PC and MCS-96 chip controller employ A/D and D/A boards (with photoelectr...The simulation techniques of hardware-in-loop simulation(HLS) of homing antitank missile based on the personal computer (PC) are discussed. The PC and MCS-96 chip controller employ A/D and D/A boards (with photoelectricity isolation) to transfer measur ment and control information about homing head, gyro and rudder and utilize the digital hand shaking board to build correct communication communication protocol. In order to satisfy the real-time requirement of HLS, this paper first simplifies the aerodynamic data file reasonably, then builds a PC software with C language. The program of the controller part is made with PL/M language. The simulation of HLS based on PC is done with the same sampling period of 10ms as that of YH-F1 and the experiment results are identical to those of digital simulation of the homing anti-tank guided missile.展开更多
Aim To develop an information processing system with real time processing capability and artistic user interface for the optoelectronic antagonism general measuring system. Methods The A/D board and the multifun...Aim To develop an information processing system with real time processing capability and artistic user interface for the optoelectronic antagonism general measuring system. Methods The A/D board and the multifunctional board communicating with every instruments were designed, data collecting and processing were realized by selecting appropriate software platform. Results Simulating results show the information processing system can operate correctly and dependably, the measuring rules, interactive interface and data handling method were all accepted by the user. Conclusion The designing approach based on the mix platform takes advantages of the two operating systems, the desired performances are acquired both in the real time processing and with the friendly artistic user interface.展开更多
Marine in situ testing is a necessary step for stereotyping newly developed marine sensors. The use of test sites in the Yangtze Estuary area, which has high turbidity and abundant nutrients, can effectively reduce th...Marine in situ testing is a necessary step for stereotyping newly developed marine sensors. The use of test sites in the Yangtze Estuary area, which has high turbidity and abundant nutrients, can effectively reduce the needed testing time owing to its harsh conditions. Five test stations were established, and a floating buoy and fixed test equipment were designed. A control system, including a sensor connection, data processor, video remote transmission, and corresponding control algorithm, was developed. The control system enabled the nondestructive monitoring of biological attachments and bidirectional, real-time communication between an upper server on land and the control system at the test sites. The dissolved oxygen(DO), temperature, and pH data of DOS600 and DPS600 sensors were compared with those of AP2000 sensors. Temperature recording using the DOS600 sensor was performed nearly as well as that of the AP2000 sensor. The mean DO values(standard deviations) were 8.414 mg L-1(2.068) and 6.896 mg L-1(1.235) for the DOS600 and AP2000 sensors, respectively, indicating that the DOS600 performance was unsatisfactory. The pH recording of the DPS600 was slightly worse than that of the AP2000 sensor. Experimental results showed that the DO value was more easily affected by the buoy movement of waves compared to the pH and temperature. Moreover, data fluctuations showed that the DO and pH parameters were more vulnerable to biofouling than temperature. Waves and biofouling create a harsh test environment, and the performance difference between the developed sensors and a standard sensor can be obtained in a short time period.展开更多
Urinary incontinence is the most common health problem in aged people. Leaving incontinence events unmanaged will make a negative influence on the aged and the patient both mentally and physically. This paper presents...Urinary incontinence is the most common health problem in aged people. Leaving incontinence events unmanaged will make a negative influence on the aged and the patient both mentally and physically. This paper presents a design and implementation of a real time wireless monitor system for urinary incontinence, which has been applied in two nursing homes in Beijing and Shanghai. We collect real time moisture information by using non-contact humidity sensor designed and manufactured by us. When urinary incontinence, the sensor will send alert to mobile device via Bluetooth. If got the alert, the mobile device will send the alert to relatives of the aged or disabled people and cloud computing platform, through which we can make this information managed and displayed and the paramedic can be informed about the alarm. This paper gives a brief introduction to the framework of this system, the design of the non-contact sensor, the transmission of wireless data and the results of tests.展开更多
Real-time decision making reflects the convergence of several digital technologies,including those concerned with the promulgation of artificial intelligence and other advanced technologies that underpin real-time act...Real-time decision making reflects the convergence of several digital technologies,including those concerned with the promulgation of artificial intelligence and other advanced technologies that underpin real-time actions.More specifically,real-time decision making can be depicted in terms of three converging dimensions:Internet of Things,decision making,and real-time.The Internet of Things include tangible goods,intangible services,ServGoods,and connected ServGoods.Decision making includes model-based analytics(since before 1990),information-based Big Data(since 1990),and training-based artificial intelligence(since 2000),and it is bolstered by the evolving real-time technologies of sensing(i.e.,capturing streaming data),processing(i.e.,applying real-time analytics),reacting(i.e.,making decisions in real-time),and learning(i.e.,employing deep neural networks).Real-time includes mobile networks,autonomous vehicles,and artificial general intelligence.Central to decision making,especially real-time decision making,is the ServGood concept,which the author introduced in an earlier paper(2012).It is a physical product or good encased by a services layer that renders the good more adaptable and smarter for a specific purpose or use.Addition of another communication sensors layer could further enhance its smartness and adaptiveness.Such connected ServGoods constitute a solid foundation for the advanced products of tomorrow which can further display their growing intelligence through real-time decisions.展开更多
Transmission control protocol (TCP) has undergone several transformations. Several proposals have been put forward to change the mechanisms of TCP congestion control to improve its performance. A line of research tend...Transmission control protocol (TCP) has undergone several transformations. Several proposals have been put forward to change the mechanisms of TCP congestion control to improve its performance. A line of research tends to reduce speed in the face of congestion thereby penalizing itself. In this group are the window based congestion control algorithms that use the size of congestion window to determine transmission speed. The two main algorithm of window based congestion control are the congestion avoidance and the slow start. The aim of this study is to survey the various modifications of window based congestion control. Much work has been done on congestion avoidance hence specific attention is placed on the slow start in order to motivate a new direction of research in network utility maximization. Mathematical modeling of the internet is discussed and proposals to improve TCP startup were reviewed. There are three lines of research on the improvement of slow start. A group uses the estimation of certain parameters to determine initial speed. The second group uses bandwidth estimation while the last group uses explicit request for network assistance to determine initial startup speed. The problems of each proposal are analyzed and a multiple startup for TCP is proposed. Multiple startups for TCP specify that startup speed is selectable from an n-arry set of algorithms. We then introduced the e-speed start which uses the prevailing network condition to determine a suitable starting speed.展开更多
This paper briefly analyzes the present situation of textile mill＇s air-conditioning system. Since it is difficult to establish detailed math model to control a textile mill＇s airconditioning system because of the i...This paper briefly analyzes the present situation of textile mill＇s air-conditioning system. Since it is difficult to establish detailed math model to control a textile mill＇s airconditioning system because of the influence of various factors such as the differences in seasons, regions, etc., most air-conditioning equipment can not be controlled automatically. This paper suggests utilizing multi-function data acquisRion card to collect the data about the temperature and humidity of a workshop, processing the data on a PC, comparing them with the expert database, and then using the 485 serial port expanding module to output the parameters, which are used to control the inverter, so that the purpose of adjusting the temperature and humidity of the workshop is achieved.展开更多
Intelligent distribution automation system （IDAS） was developed based on distribution automation system that was installed in all distribution offices of Korea. IDAS was designed the combined system with the functio...Intelligent distribution automation system （IDAS） was developed based on distribution automation system that was installed in all distribution offices of Korea. IDAS was designed the combined system with the function of supervisory control and data acquisition （SCADA） and distribution automation system （DAS） for network operation from substation to high voltage customer, and it has been installed in Vietnam, China and Indonesia. This paper explains the project scope, system configuration, and the function of each sy stem.展开更多
The conventional power systems are evolving as smart grids.In recent times cyberattacks on smart grids have been increasing.Among different attacks,False Data Injection(FDI)is considered as an emerging threat that has...The conventional power systems are evolving as smart grids.In recent times cyberattacks on smart grids have been increasing.Among different attacks,False Data Injection(FDI)is considered as an emerging threat that has significant impact.By exploiting the vulnerabilities of IEC 61850 Generic Object-Oriented Substation Events(GOOSE)and Sam-pled Values(SV)attackers can launch different FDI attacks.In this paper,a real-time set up capable of simulating FDI on GOOSE and SV protocols is developed to evaluate the impact of such attacks on power grid.IEC 62351 stipulates cybersecurity guidelines for GOOSE and SV,but only at communication or Information Technology(IT)level.Hence there is a need to develop a holistic security both at IT and Operation Technology(OT)level.In this regard,a novel sequence content resolver-based hybrid security scheme suitable to tackle FDI attacks on GOOSE and SV is proposed.Furthermore,the computational performance of the proposed hybrid security scheme is presented to demonstrate its applicability to the time critical GOOSE and SV protocols.展开更多
文摘Considering characteristic of mHealth communication and problems of existing methods, this paper presents a real-time communication method for mHealth based on extended XMPP protocol. The method can maintain the role status efficiently and reduce data latency during the communication process. Meanwhile, it can be extended flexibly to meet increasing communication demands of mHealth services. Furthermore, a system framework is presented to support telemonitoring scene. Finally, system implementation and feasibility tests verify the effectiveness of the method and framework.
基金supported by the National Natural Science Fandation of China (60672089,60772075)
文摘In consultative committee for space data systems(CCSDS)file delivery protocol(CFDP)recommendation of reliable transmission,there are no detail transmission procedure and delay calculation of prompted negative acknowledge and asynchronous negative acknowledge models.CFDP is designed to provide data and storage management,story and forward,custody transfer and reliable end-to-end delivery over deep space characterized by huge latency,intermittent link,asymmetric bandwidth and big bit error rate(BER).Four reliable transmission models are analyzed and an expected file-delivery time is calculated with different trans-mission rates,numbers and sizes of packet data units,BERs and frequencies of external events,etc.By comparison of four CFDP models,the requirement of BER for typical missions in deep space is obtained and rules of choosing CFDP models under different uplink state informations are given,which provides references for protocol models selection,utilization and modification.
基金The authors extend their appreciation to the Deanship of Scientific Research at King Khalid University for funding this work through Large Groups Project under grant number(235/44)Princess Nourah bint Abdulrahman University Researchers Supporting Project number(PNURSP2023R114)+1 种基金Princess Nourah bint Abdulrahman University,Riyadh,Saudi Arabia.The authors would like to thank the Deanship of Scientific Research at Umm Al-Qura University for supporting this work by Grant Code:(22UQU4310373DSR71)This study is supported via funding from Prince Sattam bin Abdulaziz University project number(PSAU/2023/R/1444).
文摘With the flexible deployment and high mobility of Unmanned Aerial Vehicles(UAVs)in an open environment,they have generated con-siderable attention in military and civil applications intending to enable ubiquitous connectivity and foster agile communications.The difficulty stems from features other than mobile ad-hoc network(MANET),namely aerial mobility in three-dimensional space and often changing topology.In the UAV network,a single node serves as a forwarding,transmitting,and receiving node at the same time.Typically,the communication path is multi-hop,and routing significantly affects the network’s performance.A lot of effort should be invested in performance analysis for selecting the optimum routing system.With this motivation,this study modelled a new Coati Optimization Algorithm-based Energy-Efficient Routing Process for Unmanned Aerial Vehicle Communication(COAER-UAVC)technique.The presented COAER-UAVC technique establishes effective routes for communication between the UAVs.It is primarily based on the coati characteristics in nature:if attacking and hunting iguanas and escaping from predators.Besides,the presented COAER-UAVC technique concentrates on the design of fitness functions to minimize energy utilization and communication delay.A varied group of simulations was performed to depict the optimum performance of the COAER-UAVC system.The experimental results verified that the COAER-UAVC technique had assured improved performance over other approaches.
文摘Deep space communication has its own features such as long propagation delays,heavy noise,asymmetric link rates,and intermittent connectivity in space,therefore TCP/IP protocol cannot perform as well as it does in terrestrial communications.Accordingly,the Consultative Committee for Space Data Systems(CCSDS) developed CCSDS File Delivery Protocol(CFDP),which sets standards of efficient file delivery service capable of transferring files to and from mass memory located in the space segment.In CFDP,four optional acknowledge modes are supported to make the communication more reliable.In this paper,we gave a general introduction of typical communication process in CFDP and analysis of its four Negative Acknowledgement(NAK) modes on the respect of file delivery delay and times of retransmission.We found out that despite the shortest file delivery delay,immediate NAK mode suffers from the problem that frequent retransmission may probably lead to network congestion.Thus,we proposed a new mode,the error counter-based NAK mode.By simulation of the case focused on the link between a deep space probe on Mars and a ter-restrial station on Earth,we concluded that error counter-based NAK mode has successfully reduced the retransmission times at negligible cost of certain amount of file delivery delay.
文摘The traditional software development model commonly named “waterfall” is unable to cope with the increasing functionality and complexity of modern embedded systems. In addition, it is unable to support the ability for businesses to quickly respond to new market opportunities due to changing requirements. As a response, the software development community developed the Agile Methodologies (e.g., extreme Programming, Scrum) which were also adopted by the Embedded System community. However, failures and bad experiences in applying Agile Methodologies to the development of embedded systems have not been reported in the literature. Therefore, this paper contributes a detailed account of our first-time experiences adopting an agile approach in the prototype development of a wireless environment data acquisition system in an academic environment. We successfully applied a subset of the extreme Programming (XP) methodology to our software development using the Python programming language, an experience that demonstrated its benefits in shaping the design of the software and also increasing productivity. We used an incremental development approach for the hardware components and adopted a “cumulative testing” approach. For the overall development process management, however, we concluded that the Promise/Commitment-Based Project Management (PB-PM/CBPM) was better suited. We discovered that software and hardware components of embedded systems are best developed in parallel or near-parallel. We learned that software components that pass automated tests may not survive in the tests against the hardware. Throughout this rapid prototyping effort, factors like team size and our availability as graduate students were major obstacles to fully apply the XP methodology.
文摘The simulation techniques of hardware-in-loop simulation(HLS) of homing antitank missile based on the personal computer (PC) are discussed. The PC and MCS-96 chip controller employ A/D and D/A boards (with photoelectricity isolation) to transfer measur ment and control information about homing head, gyro and rudder and utilize the digital hand shaking board to build correct communication communication protocol. In order to satisfy the real-time requirement of HLS, this paper first simplifies the aerodynamic data file reasonably, then builds a PC software with C language. The program of the controller part is made with PL/M language. The simulation of HLS based on PC is done with the same sampling period of 10ms as that of YH-F1 and the experiment results are identical to those of digital simulation of the homing anti-tank guided missile.
文摘Aim To develop an information processing system with real time processing capability and artistic user interface for the optoelectronic antagonism general measuring system. Methods The A/D board and the multifunctional board communicating with every instruments were designed, data collecting and processing were realized by selecting appropriate software platform. Results Simulating results show the information processing system can operate correctly and dependably, the measuring rules, interactive interface and data handling method were all accepted by the user. Conclusion The designing approach based on the mix platform takes advantages of the two operating systems, the desired performances are acquired both in the real time processing and with the friendly artistic user interface.
基金supported by the National Key Research and Development Plan(No.2019YFD0901300)the Shanghai Science and Technology Innovation Action Plan(No.16DZ1205100)the Shanghai Agriculture Applied Technology Development Program(No.T20180303)。
文摘Marine in situ testing is a necessary step for stereotyping newly developed marine sensors. The use of test sites in the Yangtze Estuary area, which has high turbidity and abundant nutrients, can effectively reduce the needed testing time owing to its harsh conditions. Five test stations were established, and a floating buoy and fixed test equipment were designed. A control system, including a sensor connection, data processor, video remote transmission, and corresponding control algorithm, was developed. The control system enabled the nondestructive monitoring of biological attachments and bidirectional, real-time communication between an upper server on land and the control system at the test sites. The dissolved oxygen(DO), temperature, and pH data of DOS600 and DPS600 sensors were compared with those of AP2000 sensors. Temperature recording using the DOS600 sensor was performed nearly as well as that of the AP2000 sensor. The mean DO values(standard deviations) were 8.414 mg L-1(2.068) and 6.896 mg L-1(1.235) for the DOS600 and AP2000 sensors, respectively, indicating that the DOS600 performance was unsatisfactory. The pH recording of the DPS600 was slightly worse than that of the AP2000 sensor. Experimental results showed that the DO value was more easily affected by the buoy movement of waves compared to the pH and temperature. Moreover, data fluctuations showed that the DO and pH parameters were more vulnerable to biofouling than temperature. Waves and biofouling create a harsh test environment, and the performance difference between the developed sensors and a standard sensor can be obtained in a short time period.
文摘Urinary incontinence is the most common health problem in aged people. Leaving incontinence events unmanaged will make a negative influence on the aged and the patient both mentally and physically. This paper presents a design and implementation of a real time wireless monitor system for urinary incontinence, which has been applied in two nursing homes in Beijing and Shanghai. We collect real time moisture information by using non-contact humidity sensor designed and manufactured by us. When urinary incontinence, the sensor will send alert to mobile device via Bluetooth. If got the alert, the mobile device will send the alert to relatives of the aged or disabled people and cloud computing platform, through which we can make this information managed and displayed and the paramedic can be informed about the alarm. This paper gives a brief introduction to the framework of this system, the design of the non-contact sensor, the transmission of wireless data and the results of tests.
文摘Real-time decision making reflects the convergence of several digital technologies,including those concerned with the promulgation of artificial intelligence and other advanced technologies that underpin real-time actions.More specifically,real-time decision making can be depicted in terms of three converging dimensions:Internet of Things,decision making,and real-time.The Internet of Things include tangible goods,intangible services,ServGoods,and connected ServGoods.Decision making includes model-based analytics(since before 1990),information-based Big Data(since 1990),and training-based artificial intelligence(since 2000),and it is bolstered by the evolving real-time technologies of sensing(i.e.,capturing streaming data),processing(i.e.,applying real-time analytics),reacting(i.e.,making decisions in real-time),and learning(i.e.,employing deep neural networks).Real-time includes mobile networks,autonomous vehicles,and artificial general intelligence.Central to decision making,especially real-time decision making,is the ServGood concept,which the author introduced in an earlier paper(2012).It is a physical product or good encased by a services layer that renders the good more adaptable and smarter for a specific purpose or use.Addition of another communication sensors layer could further enhance its smartness and adaptiveness.Such connected ServGoods constitute a solid foundation for the advanced products of tomorrow which can further display their growing intelligence through real-time decisions.
文摘Transmission control protocol (TCP) has undergone several transformations. Several proposals have been put forward to change the mechanisms of TCP congestion control to improve its performance. A line of research tends to reduce speed in the face of congestion thereby penalizing itself. In this group are the window based congestion control algorithms that use the size of congestion window to determine transmission speed. The two main algorithm of window based congestion control are the congestion avoidance and the slow start. The aim of this study is to survey the various modifications of window based congestion control. Much work has been done on congestion avoidance hence specific attention is placed on the slow start in order to motivate a new direction of research in network utility maximization. Mathematical modeling of the internet is discussed and proposals to improve TCP startup were reviewed. There are three lines of research on the improvement of slow start. A group uses the estimation of certain parameters to determine initial speed. The second group uses bandwidth estimation while the last group uses explicit request for network assistance to determine initial startup speed. The problems of each proposal are analyzed and a multiple startup for TCP is proposed. Multiple startups for TCP specify that startup speed is selectable from an n-arry set of algorithms. We then introduced the e-speed start which uses the prevailing network condition to determine a suitable starting speed.
文摘This paper briefly analyzes the present situation of textile mill＇s air-conditioning system. Since it is difficult to establish detailed math model to control a textile mill＇s airconditioning system because of the influence of various factors such as the differences in seasons, regions, etc., most air-conditioning equipment can not be controlled automatically. This paper suggests utilizing multi-function data acquisRion card to collect the data about the temperature and humidity of a workshop, processing the data on a PC, comparing them with the expert database, and then using the 485 serial port expanding module to output the parameters, which are used to control the inverter, so that the purpose of adjusting the temperature and humidity of the workshop is achieved.
文摘Intelligent distribution automation system （IDAS） was developed based on distribution automation system that was installed in all distribution offices of Korea. IDAS was designed the combined system with the function of supervisory control and data acquisition （SCADA） and distribution automation system （DAS） for network operation from substation to high voltage customer, and it has been installed in Vietnam, China and Indonesia. This paper explains the project scope, system configuration, and the function of each sy stem.
文摘The conventional power systems are evolving as smart grids.In recent times cyberattacks on smart grids have been increasing.Among different attacks,False Data Injection(FDI)is considered as an emerging threat that has significant impact.By exploiting the vulnerabilities of IEC 61850 Generic Object-Oriented Substation Events(GOOSE)and Sam-pled Values(SV)attackers can launch different FDI attacks.In this paper,a real-time set up capable of simulating FDI on GOOSE and SV protocols is developed to evaluate the impact of such attacks on power grid.IEC 62351 stipulates cybersecurity guidelines for GOOSE and SV,but only at communication or Information Technology(IT)level.Hence there is a need to develop a holistic security both at IT and Operation Technology(OT)level.In this regard,a novel sequence content resolver-based hybrid security scheme suitable to tackle FDI attacks on GOOSE and SV is proposed.Furthermore,the computational performance of the proposed hybrid security scheme is presented to demonstrate its applicability to the time critical GOOSE and SV protocols.
