Canopy photosynthesis,rather than leaf photosynthesis,is highly related to plant biomass and yield formation.Studying canopy photosynthesis and identifying the parameters that control it can help optimize agricultural...Canopy photosynthesis,rather than leaf photosynthesis,is highly related to plant biomass and yield formation.Studying canopy photosynthesis and identifying the parameters that control it can help optimize agricultural management and achieve crop yield potential.Compared with traditional parameters,canopy occupation volume(COV)offers an integrative parameter on canopy architecture related to canopy photosynthetic rates.In this study,we developed a high-throughput method to derive COV for different rice varieties.We first used multi-perspective two-dimensional imaging to reconstruct three-dimensional point clouds of rice plants and developed a suite of pipelines to calculate plant height,leaf number,tiller number,and biomass,with R^(2) values of 91.8%,95.9%,82.3%,and 94.3%,respectively.We further employed point cloud data to reconstruct the surfaces of rice plants and construct a virtual canopy model of the rice population.Light distribution was simulated using a ray-tracing algorithm and canopy photosynthetic rates were simulated via photosynthetic rate-incident light intensity curve fitting.Furthermore,we systematically explored the relationships between canopy phenotypes and photosynthetic rates,and found that COV was the most effective predictor of canopy photosynthesis,achieving an R^(2) value of 92.1%.Adjustment in atmospheric transmittance showed that COV strongly correlated with canopy photosynthesis under different light conditions,with higher accuracy observed under diffuse light.Variations in planting density confirmed that this correlation remained strong at the community level.In summary,this study demonstrates that COV is closely linked to simulated canopy photosynthesis and the developed pipeline can support future agronomic and breeding research.展开更多
The smart meter communication system has substantial application value for the construction and upgrading of the entire power system.The deployment of the transmitter(Tx)of the smart meter system in the residential sc...The smart meter communication system has substantial application value for the construction and upgrading of the entire power system.The deployment of the transmitter(Tx)of the smart meter system in the residential scenarios is vexed by the need for more theoretical support.This paper mainly studies the communication channel between the Tx at semibasement and receiver(Rx)at outdoor.The design of an effective communication system relies on an accurate understanding of channel characteristics.Channel measurements and ray-tracing channel modeling are conducted to obtain channel data.The influence of different positions at same semi-basement is studied.Typical channel characteristics are analyzed,such as power delay profile(PDP),power angular profile(PAP),root-mean-square(RMS)delay spread(DS),channel capacity,received power,and path loss.The influence of different semi-basement placements and different floor heights is also compared.Besides,the channel measurements and simulation data fit well,which can illustrate the validity and reliability of the acquired channel data.This paper can provide theoretical support for the design and optimization of smart meter communication systems in semi-basement scenarios.展开更多
Using a recognition model of atmospheric gravity waves(AGWs),we identified 519 AGW events from the OH airglow images observed at the Dandong and Lhasa stations from 2015 to 2017.The 317 AGW events detected at the Dand...Using a recognition model of atmospheric gravity waves(AGWs),we identified 519 AGW events from the OH airglow images observed at the Dandong and Lhasa stations from 2015 to 2017.The 317 AGW events detected at the Dandong station have wavelengths ranging from 30 to 60 km,periods from 14 to 20 min,horizontal speeds from 30 to 60 m/s,and relative intensities from 0.4%to 0.6%,respectively.The parameters of 202 events recorded at the Lhasa station mainly vary within 15-35 km in horizontal wavelength,4-6 min in period,40-100 m/s in horizontal velocity,and 0.1%-0.3%in relative intensity.The occurrence rate peaks in winter and summer at Dandong and the peak in summer are absent at Lhasa because of the lack of convective weather.The seasonal propagation directions of the waves are influenced by both the wind field-filtering effect and the distribution of wave sources.In spring,because of the southeastward background wind field,fewer southeastward events are observed at the Dandong station.The situation at the Lhasa station is similar.In summer,both the Lhasa and Dandong stations are dominated by northeastward AGWs,which can be attributed to the southwestward wind.In autumn,ray-tracing results show that the events at Dandong mainly originate from wind shear,whereas the events at the Lhasa station are triggered by convective weather.The location of the wave sources determines the trend of the propagation directions at the Dandong and Lhasa stations in autumn.In winter,because of the eastward wind,more events are propagating to the southwest at the Dandong station.展开更多
AIM:To evaluate the accuracy and predictability of ray tracing-assisted intraocular lens(IOL) calculation function in Sirius internal software and further improve the accuracy by optimizing the calculation of predicte...AIM:To evaluate the accuracy and predictability of ray tracing-assisted intraocular lens(IOL) calculation function in Sirius internal software and further improve the accuracy by optimizing the calculation of predicted lens position(PLP).METHODS:This retrospective study recruited 52 eyes of 49 patients.All of the cases with cataract had undergone phacoemulsification combined with IOL implantation.SRK-T,Haigis formula,and Sirius ray-tracing method were all used for each eye’s IOL calculation.The mean absolute value of prediction error(prediction error=predicted refraction-postoperative refraction) was defined as mean absolute prediction error(MAPE) and was determined for each method.Calculation of PLP was optimized by effective lens position(ELP).Optimized PLP was entered to Sirius internal software again to verify whether the method was improved.RESULTS:Compared with SRK-T and Haigis formulas,less accuracy was shown in Sirius ray-tracing method(P=0.001).The ELP of the IOL moved forward compared to PLP(P<0.001).The MAPE of the ELP-inputted Sirius ray-tracing method was reduced.ELP and PLP were well correlated.Taking ELP as y and PLP given by Sirius soft as x,a linear regression formula y=0.1637 x+3.1741 was concluded(R^(2)=0.1066,P=0.018).It was shown that the optimized Sirius ray-tracing method(optimized PLP entered),compared with SRK-T and Haigis formulas,worked with the same accuracy(P=0.038).CONCLUSION:The original Sirius ray tracing method is not satisfactory enough.However,in normal eyes,the optimized Sirius ray-tracing method in IOL calculation was as accurate as SRK-T and Haigis formulas.展开更多
A new seismic ray-tracing method is put forward based on parabolic travel-time interpolation(PTI) method, which is more accurate than the linear travel-time interpolation (LTI) method. Both PTI method and LTI method a...A new seismic ray-tracing method is put forward based on parabolic travel-time interpolation(PTI) method, which is more accurate than the linear travel-time interpolation (LTI) method. Both PTI method and LTI method are used to compute seismic travel-time and ray-path in a 2-D grid cell model. Firstly, some basic concepts are introduced. The calculations of travel-time and ray-path are carried out only at cell boundaries. So, the ray-path is always straight in the same cells with uniform velocity. Two steps are applied in PTI and LTI method, step 1 computes travel-time and step 2 traces ray-path. Then, the derivation of LTI formulas is described. Because of the presence of refraction wave in shot cell, the formula aiming at shot cell is also derived. Finally, PTI method is presented. The calculation of PTI method is more complex than that of LTI method, but the error is limited. The results of numerical model show that PTI method can trace ray-path more accurately and efficiently than LTI method does.展开更多
Beginning with the method of whole path iterative ray-tracing and according to the positive definiteness of the coefficient matrix of the systems of linear equations, a symmetry olock tridiagonal matrix was decomposed...Beginning with the method of whole path iterative ray-tracing and according to the positive definiteness of the coefficient matrix of the systems of linear equations, a symmetry olock tridiagonal matrix was decomposed into the product of block bidiagonal triangular matrix and its transpose by means of Cholesky decomposition. Then an algorithm for solving systems of block bidiagonal triangular linear equations was given, which is not necessary to treat with the zero elements out of banded systems. A fast algorithm for solving the systems of symmetry block tridiagonal linear equations was deduced, which can quicken the speed of ray-tracing. Finally, the simulation based on this algorithm for ray-tracing in three dimensional media was carried out. Meanwhile, the segmentally-iterative ray-tracing method and banded method for solving the systems of block tridiagonal linear equations were compared in the same model mentioned above. The convergence condition was assumed that the L-2 norm summation for mk, 1 and mk. 2 in the whole ray path was limited in 10-6. And the calculating speeds of these methods were compared. The results show that the calculating speed of this algorithm is faster than that of conventional method and the calculated results are accurate enough. In addition, its precision can be controlled according to the requirement of ray-tracing.展开更多
Radar cross section(RCS)plays a critical role in modeling target scattering characteristics and enhancing the precision of target detection and localization in integrated sensing and communication(ISAC)systems.This pa...Radar cross section(RCS)plays a critical role in modeling target scattering characteristics and enhancing the precision of target detection and localization in integrated sensing and communication(ISAC)systems.This paper investigates the human body RCS at 26 GHz via multiangle channel measurements under different clothing conditions.Based on calibrated electromagnetic(EM)parameters,the RCS characteristics of the human body in far-field conditions are analyzed using ray-tracing(RT)simulations.Some suggestions for the design of ISAC systems are also discussed.The results provide a solid theoretical foundation and practical reference for the modeling of target scattering characteristics for ISAC channels.展开更多
A three-dimensional laser absorption model based on ray tracing was established to describe the coupled interaction of a laser beam with particles in the powder layers of pure tungsten(W)material processed by selectiv...A three-dimensional laser absorption model based on ray tracing was established to describe the coupled interaction of a laser beam with particles in the powder layers of pure tungsten(W)material processed by selective laser melting(SLM).The influence of particle size on the powder-to-laser absorptivity and underlying absorption behavior was investigated.An intrinsic relationship between the absorption,distribution of absorbed irradiance within the powder layers,and surface morphology and geometric characteristics(e.g.,contact angle,width and height of tracks,and remelted depth)of the laser scanning tracks is presented here.Simulation conclusions indicate that the absorptivity of the powder layers considerably exceeds the single powder particle value or the dense solid material value.With an increase in particle size,the powder layer absorbs less laser energy.The maximum absorptivity of theWpowder layers reached 0.6030 at the particle size of 5 lm.The distribution of laser irradiance on the particle surface was sensitive to particle size,azimuthal angle,and the position of the powder particles on the substrate.The maximum irradiance in the powder layers decreased from 1.117×10^–3 to 0.85×10^–3W·μm^-2 and the contour of the irradiance distribution in the center of the irradiated area gradually contracted when the particle size increased from 5 to 45 lm.An experimental study on the surface morphologies and cross-sectional geometric characteristics of SLM-fabricated W material was performed,and the experimental results validated the mechanisms of the powder-to-laser-absorption behavior that were obtained in simulations.This work provides a scientific basis for the application of the ray-tracing model to predict the wetting and spreading ability of melted tracks during SLM additive manufacturing in order to yield a sound laser processability.展开更多
With the research of the upcoming sixth generation(6 G) systems, new technologies will require wider bandwidth, larger scale antenna arrays and more diverse wireless communication scenarios on the future channel model...With the research of the upcoming sixth generation(6 G) systems, new technologies will require wider bandwidth, larger scale antenna arrays and more diverse wireless communication scenarios on the future channel modeling. Considering channel model is prerequisite for system design and performance evaluation of 6 G technologies, we face a challenging task: how to accurately and efficiently model 6 G channel for various scenarios? This paper tries to answer it. Firstly, the features of cluster-nuclei(CN) and principle of cluster-nuclei based channel model(CNCM) are introduced. Then, a novel modeling framework is proposed to implement CNCM,which consists four steps: propagation environment reconstruction, cluster-nuclei identification, multipath parameters generation, and channel coefficients generation. Three-dimensional environment with material information is utilized to map CN with scatterers in the propagation pathway. CN are identified by geometrical and electric field calculation based on environmental mapping, and multipath components within CN are calculated by statistical characteristics of angle, power and delay domains. Finally, we present a three-level verification structure to investigate the accuracy and complexity of channel modeling comprehensively. Simulation results reveal that CNCM can perform higher accuracy than geometrybased stochastic model while lower complexity compared with ray-tracing model for practical propagation environment.展开更多
The sixth generation(6G)of mobile communication system is witnessing a new paradigm shift,i.e.,integrated sensing-communication system.A comprehensive dataset is a prerequisite for 6G integrated sensing-communication ...The sixth generation(6G)of mobile communication system is witnessing a new paradigm shift,i.e.,integrated sensing-communication system.A comprehensive dataset is a prerequisite for 6G integrated sensing-communication research.This paper develops a novel simulation dataset,named M3SC,for mixed multi-modal(MMM)sensing-communication integration,and the generation framework of the M3SC dataset is further given.To obtain multimodal sensory data in physical space and communication data in electromagnetic space,we utilize Air-Sim and WaveFarer to collect multi-modal sensory data and exploit Wireless InSite to collect communication data.Furthermore,the in-depth integration and precise alignment of AirSim,WaveFarer,andWireless InSite are achieved.The M3SC dataset covers various weather conditions,multiplex frequency bands,and different times of the day.Currently,the M3SC dataset contains 1500 snapshots,including 80 RGB images,160 depth maps,80 LiDAR point clouds,256 sets of mmWave waveforms with 8 radar point clouds,and 72 channel impulse response(CIR)matrices per snapshot,thus totaling 120,000 RGB images,240,000 depth maps,120,000 LiDAR point clouds,384,000 sets of mmWave waveforms with 12,000 radar point clouds,and 108,000 CIR matrices.The data processing result presents the multi-modal sensory information and communication channel statistical properties.Finally,the MMM sensing-communication application,which can be supported by the M3SC dataset,is discussed.展开更多
To establish a theoretical basis for providing a better design method of multielement optical systems, we have developed a third-order geometric theory of a plane-symmetric multielement optical system that consists of...To establish a theoretical basis for providing a better design method of multielement optical systems, we have developed a third-order geometric theory of a plane-symmetric multielement optical system that consists of a planar light source, an arbitrary number of ellipsoidal gratings, and an image plane. Analytic formulas of spot diagrams are derived for the system by analytically following a ray-tracing formalism. With these formulas, coma, spherical aberration, and resultant aberration are discussed. To make the theory practical, we determine the aberration coefficients numerically, rather than analytically, with the aid of ray tracing that takes into account the angular distribution of rays originating from a given light source. A merit function is defined so as to represent closely the variance of the spots formed when an infinite number of rays are traced and to take into account the dimensions of the source and the last optical element. The theory is also applicable to mirror-grating or mirror systems.展开更多
In the present reported study, the vertical distributions of local atmospheric refractivity were retrieved from ground- based GPS observations at low elevation angles. An improved optimization method was implemented a...In the present reported study, the vertical distributions of local atmospheric refractivity were retrieved from ground- based GPS observations at low elevation angles. An improved optimization method was implemented at altitudes of 0-10 km to search for a best-fit refractivity profile that resulted in atmospheric delays most similar to the delays calculated from the observations. A ray-tracing model was used to simulate neutral atmospheric delays corresponding to a given refractivity profile. We initially performed a ＂theoretical retrieval＂, in which no observation data were involved, to verify the optimization method. A statistical relative error of this ＂theoretical retrieval＂ （-2% to 2%） indicated that such a retrieval is effective. In a practical retrieval, observations were obtained using a dual-frequency GPS receiver, and its initial value was provided by CIRA86aQ_UoG data. The statistical relative errors of the practical retrieval range from -3% to 5% were compared with co-located radiosonde measurements, Results clearly revealed diurnal variations in local refractivity prc,files, The results also suggest that the general vertical distribution of refractivity can be derived with a high temporal resolution. However, further study is needed to describe the vertical refractivity gradient clearly.展开更多
This article describes the task of optical designers to achieve a better design. This is followed by some discussions on the necessity of total design that takes all the elements into account from its light source to ...This article describes the task of optical designers to achieve a better design. This is followed by some discussions on the necessity of total design that takes all the elements into account from its light source to the final image plane. Methods are given to simulate rays from a bending magnet and an undulator, surface figure errors, and thermal deformations. Some examples are given for an undulator beamline and an EUVL optical system, together with tolerance estimates of the figure error and thermal deformation.展开更多
A geometrical description of square polycapillary x-ray optics and the basic theory of the transmission of x-rays are presented. A method of numerical calculation is developed based on ray-tracing theory. The method s...A geometrical description of square polycapillary x-ray optics and the basic theory of the transmission of x-rays are presented. A method of numerical calculation is developed based on ray-tracing theory. The method simulates the intensity distribution of x-rays propagating through slice square polycapillary x-ray optics. The simulation results are compared with the experimental results.展开更多
This paper calculates light scattering by a spherical water particle containing densely packed inclusions at a visible wavelength 0.55 μm by a combination of ray-tracing and Monte Carlo techniques. While the individu...This paper calculates light scattering by a spherical water particle containing densely packed inclusions at a visible wavelength 0.55 μm by a combination of ray-tracing and Monte Carlo techniques. While the individual reflection and refraction events at the outer boundary of a sphere particle are considered by a ray-tracing program, the Monte Carlo routine simulates internal scattering processes. The main advantage of this method is that the shape of the particle can be arbitrary, and multiple scattering can be considered in the internal scattering processes. A dense-medium light-scattering theory based on the introduction of the static structure factor is used to calculate the phase function and asymmetry parameters for densely packed inclusions. Numerical results of the single scattering characteristics for a sphere containing multiple densely packed inclusions are given.展开更多
It has been argued in Part I that traditional expression of multidimensional group velocity used in meteorology is only applicable for isotropic waves. While for anisotropic waves, it cannot manifest propagation of wa...It has been argued in Part I that traditional expression of multidimensional group velocity used in meteorology is only applicable for isotropic waves. While for anisotropic waves, it cannot manifest propagation of waves group along the trajectory of a reference wave point, and varies with rotation of coordinates. The general mathematical expression of group velocity which may be used also for anisotropic waves has been derived in Part I. It will be proved that the mean wave energy, momentum and wave action density are all conserved as a wave group propagates at the general group velocity. Since general group velocity represents the movement of a reference point in either isotropic or anisotropic wave trains, it may be used to define wave rays. The variations of wave parameters along the rays in a slowly varying environment are represented by ray-tracing equations. Using the general group velocity, we may derive the anisotropic ray-tracing equations, which give the traditional ray-tracing equations for isotropic waves.展开更多
We investigate the light deflection in the weak field approximation from the accelerating charged AdS black hole.For this purpose,we apply the Gauss–Bonnet theorem to calculate the light deflection in the weak field ...We investigate the light deflection in the weak field approximation from the accelerating charged AdS black hole.For this purpose,we apply the Gauss–Bonnet theorem to calculate the light deflection in the weak field area and use the Gibbons–Werner approach to analyze the optical geometry of the accelerating charged AdS black hole in the non-magnetic plasma absence/presence of a non-magnetic medium.We also represent the graphical behavior of the light deflection angle w.r.t.the impact parameter.We also compute the light deflection angle using Keeton and Petters approximations under the impact of accelerating charged AdS black hole geometry.Furthermore,by using the ray-tracing approach,we determine the shadow in the nonmagnetic plasma presence and also demonstrate that graphical shadow has an impact on the gauge potential,non-magnetic plasma frequencies and charge.展开更多
Atmospheric duct is a common phenomenon over large bodies of water, and it can significantly affect the performance of many radio systems. In this paper, a two-month（in July and August, 2014） sounding experiment in ...Atmospheric duct is a common phenomenon over large bodies of water, and it can significantly affect the performance of many radio systems. In this paper, a two-month（in July and August, 2014） sounding experiment in ducting conditions over Bosten Lake was carried out at a littoral station（41.89°N, 87.22°E） with high resolution GPS radiosondes, and atmospheric ducts were observed for the first time in this area. During the two months, surface and surface-based ducts occurred frequently over the Lake. Strong diurnal variations in ducting characteristics were noticed in clear days. Ducting occurrence was found at its lowest in the early morning and at its highest（nearly 100%） in the afternoon. Duct strength was found increasing from early morning to forenoon, and reaching its maximum in the afternoon. But contrarily, duct altitude experienced a decrease in a clear day. Then the meteorological reasons for the variations were discussed in detail, turbulent bursting was a possible reason for the duct formation in the early morning and the prevailing lake-breeze front was the main reason in the afternoon. The propagation of electromagnetic wave in a ducting environment was also investigated. A raytracing framework based on Runge–Kutta method was proposed to assess the performance of radio systems, and the precise critical angle and grazing angle derived from the ray-tracing equations were provided. Finally, numerical investigations on the radar performance in the observed ducting environments have been carried out with high accuracy, which demonstrated that atmospheric ducts had made great impacts on the performance of radio systems. The range/height errors for radar measurement induced by refraction have also been presented, too, which shows that the height errors were very large for trapped rays when the total range was long enough.展开更多
A concentric gravity wave event was captured by a photographer in NagarzêCounty(90.28°N,28.33°E)between 02:00 and 04:00(local time)on May 11,2019.This concentric gravity wave event was also observed by ...A concentric gravity wave event was captured by a photographer in NagarzêCounty(90.28°N,28.33°E)between 02:00 and 04:00(local time)on May 11,2019.This concentric gravity wave event was also observed by the Suomi National Polar-orbiting Partnership satellite and the all-sky airglow imager at Yangbajing station(90.5°E,30.1°N).The temporal and spatial information on gravity waves from the photographs provided a rare opportunity to study the propagation of gravity waves over the Tibetan Plateau.According to wind and temperature data from the MERRA-2 reanalysis(Modern-Era Retrospective analysis for Research and Applications,Version 2)and empirical models(NRLMSISE-00[Naval Research Laboratory Mass Spectrometer and Incoherent Scatter Radar Exosphere]and HWM[horizontal wind model]),we inversely derived the propagation trajectory from the observed wave pattern to the source region by using the ray-tracing method.The source of the concentric gravity wave was identified as deep convection in Bangladesh(90.6°E,25.0°N).The maximum background wind speed in the propagation direction(31.05 m/s)was less than the phase speed of 53 m/s,which is consistent with the wind-filtering theory.展开更多
The effect of the azimuthal angle φ of the wave vector k on the propagation characteristics of the superluminous L-O mode waves （together with a case of the R-X mode） during different geomagnetic activities using a...The effect of the azimuthal angle φ of the wave vector k on the propagation characteristics of the superluminous L-O mode waves （together with a case of the R-X mode） during different geomagnetic activities using a three-dimensional （3D） ray-tracing method is investigated. This work is primarily an extension of our previous two-dimensional study in which the wave azimuthal angle was not considered. We present numerical simulations for this mode which is generated in the source cavity along a 70° night geomagnetic field line at the specific altitude of 1.5RE （where RE is the Earth＇s radius）. It is found that, as in the two-dimensional case, the trajectory of L-O mode starting in the source meridian plane （or the wave azimuthal angle φ = 180°） can reach the lowest latitude; whereas it basically stays at relatively higher latitudes starting off the source meridian plane （or φ=180°）. The results reveal that under appropriate conditions, the superluminous L-O mode waves may exist in the radiation belts of the Earth, but this remains to be supplemented by observational data.展开更多
基金supported by the National Natural Science Foundation of China(Grant Nos.32201654 and U22A20464)National Key Research and Development Program from the Ministry of Science and Technology of China(Grant No.2020YFA0907600)the 2115 Talent Development Program of China Agricultural University.
文摘Canopy photosynthesis,rather than leaf photosynthesis,is highly related to plant biomass and yield formation.Studying canopy photosynthesis and identifying the parameters that control it can help optimize agricultural management and achieve crop yield potential.Compared with traditional parameters,canopy occupation volume(COV)offers an integrative parameter on canopy architecture related to canopy photosynthetic rates.In this study,we developed a high-throughput method to derive COV for different rice varieties.We first used multi-perspective two-dimensional imaging to reconstruct three-dimensional point clouds of rice plants and developed a suite of pipelines to calculate plant height,leaf number,tiller number,and biomass,with R^(2) values of 91.8%,95.9%,82.3%,and 94.3%,respectively.We further employed point cloud data to reconstruct the surfaces of rice plants and construct a virtual canopy model of the rice population.Light distribution was simulated using a ray-tracing algorithm and canopy photosynthetic rates were simulated via photosynthetic rate-incident light intensity curve fitting.Furthermore,we systematically explored the relationships between canopy phenotypes and photosynthetic rates,and found that COV was the most effective predictor of canopy photosynthesis,achieving an R^(2) value of 92.1%.Adjustment in atmospheric transmittance showed that COV strongly correlated with canopy photosynthesis under different light conditions,with higher accuracy observed under diffuse light.Variations in planting density confirmed that this correlation remained strong at the community level.In summary,this study demonstrates that COV is closely linked to simulated canopy photosynthesis and the developed pipeline can support future agronomic and breeding research.
基金supported by the Natural Science Foundation of Shandong Province under Grant ZR2024MF062the open research fund of National Mobile Communications Research Laboratory,Southeast University under Grants 2025D03+1 种基金the Future Plan Program for Young Scholars of Shandong University,and the Innovation and Technology Support Program for Young Scholars of Colleges and Universities in Shandong Province under Grant 2022KJ009The B6G R&D Group in Shandong University is greatly thanked for channel measurements.
文摘The smart meter communication system has substantial application value for the construction and upgrading of the entire power system.The deployment of the transmitter(Tx)of the smart meter system in the residential scenarios is vexed by the need for more theoretical support.This paper mainly studies the communication channel between the Tx at semibasement and receiver(Rx)at outdoor.The design of an effective communication system relies on an accurate understanding of channel characteristics.Channel measurements and ray-tracing channel modeling are conducted to obtain channel data.The influence of different positions at same semi-basement is studied.Typical channel characteristics are analyzed,such as power delay profile(PDP),power angular profile(PAP),root-mean-square(RMS)delay spread(DS),channel capacity,received power,and path loss.The influence of different semi-basement placements and different floor heights is also compared.Besides,the channel measurements and simulation data fit well,which can illustrate the validity and reliability of the acquired channel data.This paper can provide theoretical support for the design and optimization of smart meter communication systems in semi-basement scenarios.
基金supported by the National Key Research and Development Program of China(Grant No.2022YFF0711402)the Specialized Research Fund for State Key Laboratories。
文摘Using a recognition model of atmospheric gravity waves(AGWs),we identified 519 AGW events from the OH airglow images observed at the Dandong and Lhasa stations from 2015 to 2017.The 317 AGW events detected at the Dandong station have wavelengths ranging from 30 to 60 km,periods from 14 to 20 min,horizontal speeds from 30 to 60 m/s,and relative intensities from 0.4%to 0.6%,respectively.The parameters of 202 events recorded at the Lhasa station mainly vary within 15-35 km in horizontal wavelength,4-6 min in period,40-100 m/s in horizontal velocity,and 0.1%-0.3%in relative intensity.The occurrence rate peaks in winter and summer at Dandong and the peak in summer are absent at Lhasa because of the lack of convective weather.The seasonal propagation directions of the waves are influenced by both the wind field-filtering effect and the distribution of wave sources.In spring,because of the southeastward background wind field,fewer southeastward events are observed at the Dandong station.The situation at the Lhasa station is similar.In summer,both the Lhasa and Dandong stations are dominated by northeastward AGWs,which can be attributed to the southwestward wind.In autumn,ray-tracing results show that the events at Dandong mainly originate from wind shear,whereas the events at the Lhasa station are triggered by convective weather.The location of the wave sources determines the trend of the propagation directions at the Dandong and Lhasa stations in autumn.In winter,because of the eastward wind,more events are propagating to the southwest at the Dandong station.
基金Supported by the Basic Scientific Research Project of Wenzhou (No.2020Y0599)。
文摘AIM:To evaluate the accuracy and predictability of ray tracing-assisted intraocular lens(IOL) calculation function in Sirius internal software and further improve the accuracy by optimizing the calculation of predicted lens position(PLP).METHODS:This retrospective study recruited 52 eyes of 49 patients.All of the cases with cataract had undergone phacoemulsification combined with IOL implantation.SRK-T,Haigis formula,and Sirius ray-tracing method were all used for each eye’s IOL calculation.The mean absolute value of prediction error(prediction error=predicted refraction-postoperative refraction) was defined as mean absolute prediction error(MAPE) and was determined for each method.Calculation of PLP was optimized by effective lens position(ELP).Optimized PLP was entered to Sirius internal software again to verify whether the method was improved.RESULTS:Compared with SRK-T and Haigis formulas,less accuracy was shown in Sirius ray-tracing method(P=0.001).The ELP of the IOL moved forward compared to PLP(P<0.001).The MAPE of the ELP-inputted Sirius ray-tracing method was reduced.ELP and PLP were well correlated.Taking ELP as y and PLP given by Sirius soft as x,a linear regression formula y=0.1637 x+3.1741 was concluded(R^(2)=0.1066,P=0.018).It was shown that the optimized Sirius ray-tracing method(optimized PLP entered),compared with SRK-T and Haigis formulas,worked with the same accuracy(P=0.038).CONCLUSION:The original Sirius ray tracing method is not satisfactory enough.However,in normal eyes,the optimized Sirius ray-tracing method in IOL calculation was as accurate as SRK-T and Haigis formulas.
文摘A new seismic ray-tracing method is put forward based on parabolic travel-time interpolation(PTI) method, which is more accurate than the linear travel-time interpolation (LTI) method. Both PTI method and LTI method are used to compute seismic travel-time and ray-path in a 2-D grid cell model. Firstly, some basic concepts are introduced. The calculations of travel-time and ray-path are carried out only at cell boundaries. So, the ray-path is always straight in the same cells with uniform velocity. Two steps are applied in PTI and LTI method, step 1 computes travel-time and step 2 traces ray-path. Then, the derivation of LTI formulas is described. Because of the presence of refraction wave in shot cell, the formula aiming at shot cell is also derived. Finally, PTI method is presented. The calculation of PTI method is more complex than that of LTI method, but the error is limited. The results of numerical model show that PTI method can trace ray-path more accurately and efficiently than LTI method does.
基金Project(40674071) supported by the National Natural Science Foundation of ChinaProject(KFAS2002-2003) supported by the Korea Foundation for Advanced Studies
文摘Beginning with the method of whole path iterative ray-tracing and according to the positive definiteness of the coefficient matrix of the systems of linear equations, a symmetry olock tridiagonal matrix was decomposed into the product of block bidiagonal triangular matrix and its transpose by means of Cholesky decomposition. Then an algorithm for solving systems of block bidiagonal triangular linear equations was given, which is not necessary to treat with the zero elements out of banded systems. A fast algorithm for solving the systems of symmetry block tridiagonal linear equations was deduced, which can quicken the speed of ray-tracing. Finally, the simulation based on this algorithm for ray-tracing in three dimensional media was carried out. Meanwhile, the segmentally-iterative ray-tracing method and banded method for solving the systems of block tridiagonal linear equations were compared in the same model mentioned above. The convergence condition was assumed that the L-2 norm summation for mk, 1 and mk. 2 in the whole ray path was limited in 10-6. And the calculating speeds of these methods were compared. The results show that the calculating speed of this algorithm is faster than that of conventional method and the calculated results are accurate enough. In addition, its precision can be controlled according to the requirement of ray-tracing.
基金supported by the National Natural Science Foundation of China under Grant No.62271043Ministry of Education of China under Grant No.8091B032123Beijing Natural Science Foundation under Grant No.L212029。
文摘Radar cross section(RCS)plays a critical role in modeling target scattering characteristics and enhancing the precision of target detection and localization in integrated sensing and communication(ISAC)systems.This paper investigates the human body RCS at 26 GHz via multiangle channel measurements under different clothing conditions.Based on calibrated electromagnetic(EM)parameters,the RCS characteristics of the human body in far-field conditions are analyzed using ray-tracing(RT)simulations.Some suggestions for the design of ISAC systems are also discussed.The results provide a solid theoretical foundation and practical reference for the modeling of target scattering characteristics for ISAC channels.
文摘A three-dimensional laser absorption model based on ray tracing was established to describe the coupled interaction of a laser beam with particles in the powder layers of pure tungsten(W)material processed by selective laser melting(SLM).The influence of particle size on the powder-to-laser absorptivity and underlying absorption behavior was investigated.An intrinsic relationship between the absorption,distribution of absorbed irradiance within the powder layers,and surface morphology and geometric characteristics(e.g.,contact angle,width and height of tracks,and remelted depth)of the laser scanning tracks is presented here.Simulation conclusions indicate that the absorptivity of the powder layers considerably exceeds the single powder particle value or the dense solid material value.With an increase in particle size,the powder layer absorbs less laser energy.The maximum absorptivity of theWpowder layers reached 0.6030 at the particle size of 5 lm.The distribution of laser irradiance on the particle surface was sensitive to particle size,azimuthal angle,and the position of the powder particles on the substrate.The maximum irradiance in the powder layers decreased from 1.117×10^–3 to 0.85×10^–3W·μm^-2 and the contour of the irradiance distribution in the center of the irradiated area gradually contracted when the particle size increased from 5 to 45 lm.An experimental study on the surface morphologies and cross-sectional geometric characteristics of SLM-fabricated W material was performed,and the experimental results validated the mechanisms of the powder-to-laser-absorption behavior that were obtained in simulations.This work provides a scientific basis for the application of the ray-tracing model to predict the wetting and spreading ability of melted tracks during SLM additive manufacturing in order to yield a sound laser processability.
基金supported by National Science Fund for Distinguished Young Scholars (No.61925102)Beijing University of Posts and TelecommunicationsChina Mobile Research Institute Joint Innovation Center。
文摘With the research of the upcoming sixth generation(6 G) systems, new technologies will require wider bandwidth, larger scale antenna arrays and more diverse wireless communication scenarios on the future channel modeling. Considering channel model is prerequisite for system design and performance evaluation of 6 G technologies, we face a challenging task: how to accurately and efficiently model 6 G channel for various scenarios? This paper tries to answer it. Firstly, the features of cluster-nuclei(CN) and principle of cluster-nuclei based channel model(CNCM) are introduced. Then, a novel modeling framework is proposed to implement CNCM,which consists four steps: propagation environment reconstruction, cluster-nuclei identification, multipath parameters generation, and channel coefficients generation. Three-dimensional environment with material information is utilized to map CN with scatterers in the propagation pathway. CN are identified by geometrical and electric field calculation based on environmental mapping, and multipath components within CN are calculated by statistical characteristics of angle, power and delay domains. Finally, we present a three-level verification structure to investigate the accuracy and complexity of channel modeling comprehensively. Simulation results reveal that CNCM can perform higher accuracy than geometrybased stochastic model while lower complexity compared with ray-tracing model for practical propagation environment.
基金This work was supported in part by the Ministry National Key Research and Development Project(Grant No.2020AAA0108101)the National Natural Science Foundation of China(Grants No.62125101,62341101,62001018,and 62301011)+1 种基金Shandong Natural Science Foundation(Grant No.ZR2023YQ058)the New Cornerstone Science Foundation through the XPLORER PRIZE.The authors would like to thank Mengyuan Lu and Zengrui Han for their help in the construction of electromagnetic space in Wireless InSite simulation platform and Weibo Wen,Qi Duan,and Yong Yu for their help in the construction of phys ical space in AirSim simulation platform.
文摘The sixth generation(6G)of mobile communication system is witnessing a new paradigm shift,i.e.,integrated sensing-communication system.A comprehensive dataset is a prerequisite for 6G integrated sensing-communication research.This paper develops a novel simulation dataset,named M3SC,for mixed multi-modal(MMM)sensing-communication integration,and the generation framework of the M3SC dataset is further given.To obtain multimodal sensory data in physical space and communication data in electromagnetic space,we utilize Air-Sim and WaveFarer to collect multi-modal sensory data and exploit Wireless InSite to collect communication data.Furthermore,the in-depth integration and precise alignment of AirSim,WaveFarer,andWireless InSite are achieved.The M3SC dataset covers various weather conditions,multiplex frequency bands,and different times of the day.Currently,the M3SC dataset contains 1500 snapshots,including 80 RGB images,160 depth maps,80 LiDAR point clouds,256 sets of mmWave waveforms with 8 radar point clouds,and 72 channel impulse response(CIR)matrices per snapshot,thus totaling 120,000 RGB images,240,000 depth maps,120,000 LiDAR point clouds,384,000 sets of mmWave waveforms with 12,000 radar point clouds,and 108,000 CIR matrices.The data processing result presents the multi-modal sensory information and communication channel statistical properties.Finally,the MMM sensing-communication application,which can be supported by the M3SC dataset,is discussed.
文摘To establish a theoretical basis for providing a better design method of multielement optical systems, we have developed a third-order geometric theory of a plane-symmetric multielement optical system that consists of a planar light source, an arbitrary number of ellipsoidal gratings, and an image plane. Analytic formulas of spot diagrams are derived for the system by analytically following a ray-tracing formalism. With these formulas, coma, spherical aberration, and resultant aberration are discussed. To make the theory practical, we determine the aberration coefficients numerically, rather than analytically, with the aid of ray tracing that takes into account the angular distribution of rays originating from a given light source. A merit function is defined so as to represent closely the variance of the spots formed when an infinite number of rays are traced and to take into account the dimensions of the source and the last optical element. The theory is also applicable to mirror-grating or mirror systems.
基金supported by the National Basic Research Program of China (973 Program) under Grant No. 2010CB428601the Open Fund of the State Key Laboratory of Satellite Ocean Environment Dynamics under Contract No. SOED0705the China Postdoctoral Science Foundation
文摘In the present reported study, the vertical distributions of local atmospheric refractivity were retrieved from ground- based GPS observations at low elevation angles. An improved optimization method was implemented at altitudes of 0-10 km to search for a best-fit refractivity profile that resulted in atmospheric delays most similar to the delays calculated from the observations. A ray-tracing model was used to simulate neutral atmospheric delays corresponding to a given refractivity profile. We initially performed a ＂theoretical retrieval＂, in which no observation data were involved, to verify the optimization method. A statistical relative error of this ＂theoretical retrieval＂ （-2% to 2%） indicated that such a retrieval is effective. In a practical retrieval, observations were obtained using a dual-frequency GPS receiver, and its initial value was provided by CIRA86aQ_UoG data. The statistical relative errors of the practical retrieval range from -3% to 5% were compared with co-located radiosonde measurements, Results clearly revealed diurnal variations in local refractivity prc,files, The results also suggest that the general vertical distribution of refractivity can be derived with a high temporal resolution. However, further study is needed to describe the vertical refractivity gradient clearly.
文摘This article describes the task of optical designers to achieve a better design. This is followed by some discussions on the necessity of total design that takes all the elements into account from its light source to the final image plane. Methods are given to simulate rays from a bending magnet and an undulator, surface figure errors, and thermal deformations. Some examples are given for an undulator beamline and an EUVL optical system, together with tolerance estimates of the figure error and thermal deformation.
基金Project supported by the Fundamental Research Funds for the Central Universities,China(Grant Nos.2012LZD07 and 2014k JJCA03)the National Natural Science Foundation of China(Grant Nos.11375027 and 11075017)
文摘A geometrical description of square polycapillary x-ray optics and the basic theory of the transmission of x-rays are presented. A method of numerical calculation is developed based on ray-tracing theory. The method simulates the intensity distribution of x-rays propagating through slice square polycapillary x-ray optics. The simulation results are compared with the experimental results.
基金supported by the National Natural Science Foundation of China (Grant No 60877050)
文摘This paper calculates light scattering by a spherical water particle containing densely packed inclusions at a visible wavelength 0.55 μm by a combination of ray-tracing and Monte Carlo techniques. While the individual reflection and refraction events at the outer boundary of a sphere particle are considered by a ray-tracing program, the Monte Carlo routine simulates internal scattering processes. The main advantage of this method is that the shape of the particle can be arbitrary, and multiple scattering can be considered in the internal scattering processes. A dense-medium light-scattering theory based on the introduction of the static structure factor is used to calculate the phase function and asymmetry parameters for densely packed inclusions. Numerical results of the single scattering characteristics for a sphere containing multiple densely packed inclusions are given.
文摘It has been argued in Part I that traditional expression of multidimensional group velocity used in meteorology is only applicable for isotropic waves. While for anisotropic waves, it cannot manifest propagation of waves group along the trajectory of a reference wave point, and varies with rotation of coordinates. The general mathematical expression of group velocity which may be used also for anisotropic waves has been derived in Part I. It will be proved that the mean wave energy, momentum and wave action density are all conserved as a wave group propagates at the general group velocity. Since general group velocity represents the movement of a reference point in either isotropic or anisotropic wave trains, it may be used to define wave rays. The variations of wave parameters along the rays in a slowly varying environment are represented by ray-tracing equations. Using the general group velocity, we may derive the anisotropic ray-tracing equations, which give the traditional ray-tracing equations for isotropic waves.
基金funded by the National Natural Science Foundation of China 11975145。
文摘We investigate the light deflection in the weak field approximation from the accelerating charged AdS black hole.For this purpose,we apply the Gauss–Bonnet theorem to calculate the light deflection in the weak field area and use the Gibbons–Werner approach to analyze the optical geometry of the accelerating charged AdS black hole in the non-magnetic plasma absence/presence of a non-magnetic medium.We also represent the graphical behavior of the light deflection angle w.r.t.the impact parameter.We also compute the light deflection angle using Keeton and Petters approximations under the impact of accelerating charged AdS black hole geometry.Furthermore,by using the ray-tracing approach,we determine the shadow in the nonmagnetic plasma presence and also demonstrate that graphical shadow has an impact on the gauge potential,non-magnetic plasma frequencies and charge.
文摘Atmospheric duct is a common phenomenon over large bodies of water, and it can significantly affect the performance of many radio systems. In this paper, a two-month（in July and August, 2014） sounding experiment in ducting conditions over Bosten Lake was carried out at a littoral station（41.89°N, 87.22°E） with high resolution GPS radiosondes, and atmospheric ducts were observed for the first time in this area. During the two months, surface and surface-based ducts occurred frequently over the Lake. Strong diurnal variations in ducting characteristics were noticed in clear days. Ducting occurrence was found at its lowest in the early morning and at its highest（nearly 100%） in the afternoon. Duct strength was found increasing from early morning to forenoon, and reaching its maximum in the afternoon. But contrarily, duct altitude experienced a decrease in a clear day. Then the meteorological reasons for the variations were discussed in detail, turbulent bursting was a possible reason for the duct formation in the early morning and the prevailing lake-breeze front was the main reason in the afternoon. The propagation of electromagnetic wave in a ducting environment was also investigated. A raytracing framework based on Runge–Kutta method was proposed to assess the performance of radio systems, and the precise critical angle and grazing angle derived from the ray-tracing equations were provided. Finally, numerical investigations on the radar performance in the observed ducting environments have been carried out with high accuracy, which demonstrated that atmospheric ducts had made great impacts on the performance of radio systems. The range/height errors for radar measurement induced by refraction have also been presented, too, which shows that the height errors were very large for trapped rays when the total range was long enough.
基金funded by the Science Foundation of Chongqing(Grant No.cstc2020jcyj-msxmX0914)the Informatization Plan of the Chinese Academy of Sciences(Grant No.CAS-WX2021PY-0101)the Specialized Re-search Fund for State Key Laboratories.
文摘A concentric gravity wave event was captured by a photographer in NagarzêCounty(90.28°N,28.33°E)between 02:00 and 04:00(local time)on May 11,2019.This concentric gravity wave event was also observed by the Suomi National Polar-orbiting Partnership satellite and the all-sky airglow imager at Yangbajing station(90.5°E,30.1°N).The temporal and spatial information on gravity waves from the photographs provided a rare opportunity to study the propagation of gravity waves over the Tibetan Plateau.According to wind and temperature data from the MERRA-2 reanalysis(Modern-Era Retrospective analysis for Research and Applications,Version 2)and empirical models(NRLMSISE-00[Naval Research Laboratory Mass Spectrometer and Incoherent Scatter Radar Exosphere]and HWM[horizontal wind model]),we inversely derived the propagation trajectory from the observed wave pattern to the source region by using the ray-tracing method.The source of the concentric gravity wave was identified as deep convection in Bangladesh(90.6°E,25.0°N).The maximum background wind speed in the propagation direction(31.05 m/s)was less than the phase speed of 53 m/s,which is consistent with the wind-filtering theory.
基金National Natural Science Foundation of China(Nos.40774078,40774077)the Chinese Academy of Sciences(No.KZCX3-SW-144)
文摘The effect of the azimuthal angle φ of the wave vector k on the propagation characteristics of the superluminous L-O mode waves （together with a case of the R-X mode） during different geomagnetic activities using a three-dimensional （3D） ray-tracing method is investigated. This work is primarily an extension of our previous two-dimensional study in which the wave azimuthal angle was not considered. We present numerical simulations for this mode which is generated in the source cavity along a 70° night geomagnetic field line at the specific altitude of 1.5RE （where RE is the Earth＇s radius）. It is found that, as in the two-dimensional case, the trajectory of L-O mode starting in the source meridian plane （or the wave azimuthal angle φ = 180°） can reach the lowest latitude; whereas it basically stays at relatively higher latitudes starting off the source meridian plane （or φ=180°）. The results reveal that under appropriate conditions, the superluminous L-O mode waves may exist in the radiation belts of the Earth, but this remains to be supplemented by observational data.
