The radiation damage responses of ttuorinated and non-fluorinated lateral PNP transistors are studied with specially designed gated-controlled lateral PNP transistors that allow for the extraction of the oxide trapped...The radiation damage responses of ttuorinated and non-fluorinated lateral PNP transistors are studied with specially designed gated-controlled lateral PNP transistors that allow for the extraction of the oxide trapped charge （Not） and interface trap （Nit） densities. All the samples are exposed in the Co-60γ ray with the dose rate of 0.5 Gy（Si）/s. After the irradiation, the buildup of Not and Nit of the samples with total dose is investigated by the gate sweep test technique. The results show that the radiation resistance of fluorinated lateral PNP transistors is significantly enhanced compared with the non-fluorinated ones.展开更多
The microwave radiation method was introduced to prepare the Fe_2O_3/SO solid superacid.Its structure and properties were investigated by means of X-ray diffraction and infrared spectrum analyses as well as measuremen...The microwave radiation method was introduced to prepare the Fe_2O_3/SO solid superacid.Its structure and properties were investigated by means of X-ray diffraction and infrared spectrum analyses as well as measurement of magnetic susceptibility and rate of esterification. The structure of the superacids prepared in microwave field can be crystalline or non-crystalline, the latter has not been reported yet in literatures. Comparing with the traditional superacid, the non-crystalline Fe2O3/SO superacid prepared in microwave field has the highest magnetic susceptibility and catalytic activity. The di-coordination of Fe2O3 and SO and the S=O bi-bond were reinforced by microwave radiation, which is favorable for increasing the acid intensity of the Fe2O3/SO catalyst展开更多
The solar temperature field of a large three-span continuous bridge with steel-concrete composite box girder and variable cross-section is measured to verify a calculation method for the temperature field of steel-con...The solar temperature field of a large three-span continuous bridge with steel-concrete composite box girder and variable cross-section is measured to verify a calculation method for the temperature field of steel-concrete composite beams. The test results show that the temperature of an external steel web- plate is higher than that of an internal web-plate due to the difference in solar radiation. Air temperature inside the box matches the average temperature of the whole steel box. Based on actual measurements, a transient thermal analysis with multiple boundary conditions is also carried out by a software program ANSYS. Convective boundary situation and states of solar radiation on steel web plates in different situations are determined in the analysis. The feature of the temperature field is preliminarily achieved through a comparative study between the actual measurement and the finite element analysis. The computed results are in good consistence with the actual measurement results, with the maximum difference within 2 ℃. This indicates that the theoretical calculation method is reliable and it provides a foundation for further research on temperature field distribution in the steel-concrete composite box girder.展开更多
Analyzing and understanding the effects of ambient pollution on plants is getting more and more attention as a topic of environmental biology.A method based on synchrotron radiation X-ray fluorescence and X-ray absorp...Analyzing and understanding the effects of ambient pollution on plants is getting more and more attention as a topic of environmental biology.A method based on synchrotron radiation X-ray fluorescence and X-ray absorption near edge structure spectroscopy was established to analyze the sulfur concentration and speciation in mature camphor tree leaves （CTLs）,which were sampled from 5 local fields in Shanghai,China.Annual SO2 concentration,SO42-concentration in atmospheric particulate,SO42-and sulfur concentration in soil were also analyzed to explore the relationship between ambient sulfur sources and the sulfur nutrient cycling in CTLs.Total sulfur concentration in mature camphor tree leaves was 766-1704 mg/kg.The mainly detected sulfur states and their corresponding compounds were ＋6 （sulfate,include inorganic sulfate and organic sulfate）,＋5.2 （sulfonate）,＋2.2 （suloxides）,＋0.6 （thiols and thiothers）,＋0.2 （organic sulfides）.Total sulfur concentration was strongly correlated with sulfate proportion with a linear correlation coefficient up to 0.977,which suggested that sulfur accumulated in CTLs as sulfate form.Reduced sulfur compounds （organic sulfides,thiols,thioethers,sulfoxide and sulfonate） assimilation was sufficed to meet the nutrient requirement for growth at a balanced level around 526 mg/kg.The sulfate accumulation mainly caused by atmospheric sulfur pollution such as SO2 and airborne sulfate particulate instead of soil contamination.From urban to suburb place,sulfate in mature CTLs decreased as the atmospheric sulfur pollution reduced,but a dramatic increase presented near the seashore,where the marine sulfate emission and maritime activity pollution were significant.The sulfur concentration and speciation in mature CTLs effectively represented the long-term biological accumulation of atmospheric sulfur pollution in local environment.展开更多
With the purpose of efficiently predicting structural radiated noise of internal combustion engine（I.C.E.）,a new simulation technique is introduced,which is an approach based on boundary element method （BEM）,acous...With the purpose of efficiently predicting structural radiated noise of internal combustion engine（I.C.E.）,a new simulation technique is introduced,which is an approach based on boundary element method （BEM）,acoustic transfer vector（ATV） technique and coupled boundary element model and finite element model （BEM-FEM） approach.Analyses of vibration exciting loads,computing structural dynamic characteristics and dynamic responses have led to theoretical results,which are tested on an L6 diesel engine to validate this proposed technique in engineering practice.展开更多
According to the differences in ore-controlling structural systems and the characteristics of host rocks, textures and structures of ores and mineral associations of ores, quartz vein-type gold deposits in the Rushan ...According to the differences in ore-controlling structural systems and the characteristics of host rocks, textures and structures of ores and mineral associations of ores, quartz vein-type gold deposits in the Rushan area can be divided into the Rushan and Tongling styles. Rushan style gold deposits, occurring in the Kunyushan complex, include Rushan, Tangjiagou and Tongxishan gold mines. They are distributed along four NNE-trending and sinistral, compresso-shear faults with a right stepping array. A prominent characteristic of the gold mineralization is that the orebodies in neighbouring gold deposits distributed in a single ore-controlling fault zone take opposite pitches. Study of the locating structures of the quartz vein gold deposits shows that the Rushan-style gold deposits are characterized by NNE and NE zoning. Therefore, the intersections of the NE direction of the known gold deposit and the neighbouring NNE-trending fault zones are favourable for looking for gold deposits, and the ends of the curving segments of sinistral and right-stepping faults are favourable for looking for large gold deposits. Tongling-style gold deposits occur in the Sanfosan porphyritic monzonitic granite. Emplacement of gold deposits is controlled by arcuate and radiate structures formed during the intrusion of the Sanfoshan porphyritic monzonitic granite; the radiate faults controlled the distribution of orebodies and the arcuate faults controlled the pitch of the orebodies.展开更多
In this work,we study a direction dependent power spectrum in anisotropic Finsler spacetime. We use this direction dependent power spectrum to address the low-l power observed in WMAP and PLANCK data. The angular powe...In this work,we study a direction dependent power spectrum in anisotropic Finsler spacetime. We use this direction dependent power spectrum to address the low-l power observed in WMAP and PLANCK data. The angular power spectrum of the temperature fluctuations has a lower amplitude in comparison to the ΛCDM model in the multipole range l = 2-40. Our theoretical model gives a correction to the isotropic angular power spectrum Cl^TT ldue to the breaking of rotational invariance of the primordial power spectrum. We estimate best-fit model parameters along with the six ΛCDM cosmological parameters using the PLANCK likelihood code in Cosmo MC software. We find that this modified angular power spectrum fits the CMB temperature data in the multipole range l = 2-10 to a good extent but fails for the whole multipole range l = 2-40.展开更多
The solution to the state response of active constrained layer and the expression of the sound field radiated from the vibrating structure are given, and the damping mechanisms of active constrained layer (ACL) are di...The solution to the state response of active constrained layer and the expression of the sound field radiated from the vibrating structure are given, and the damping mechanisms of active constrained layer (ACL) are discussed. Compaxisons are made with the passive constrained layer (PCL) and the traditional active control method in reducing the structural vibration. The numerical results indicate that: using the active constrained layer damping (ACLD) treatment to dissipate energyt not only the vibration amplitude of structtire is reduced, but also the sound radiated from vibrating structure is suppressed展开更多
Structural modularization,lightweight and functional integration are the urgent devel-opment directions for next generation high-performance aeroengines.Heat concentration during aeroengine operation would lead to loc...Structural modularization,lightweight and functional integration are the urgent devel-opment directions for next generation high-performance aeroengines.Heat concentration during aeroengine operation would lead to local high temperature,which tremendously negative impacts on aeroengine structural life and performance.Therefore,the design and optimization of radiator structures are significant for the efficiency and reliability of aeroengine.The structural geometry design and layout optimization of radiators is promising to improve the heat dissipation efficiency and reduce aerodynamic loss.The purpose of this study is to investigate the state of the art and perspectives of aeroengine radiator structural design by a comprehensive literature review.The main contents involve the review on the structural design and layout optimization technologies of radiator structures,the analyses of the structural features,design theory and methods of existed radiator structures,the induction of the theory and method of different radiators structural opti-mization design,and the discussion on the application perspectives of advanced structures in aeroengine radiators,the report on the current challenges and development directions of the design of radiator structures,including smart materials,lattice structures,variable structures,advanced optimization theories and methods,heat dissipation methods and so forth.The efforts of this study are promising to support the high-performance and lightweight design of aeroengine structures besides radiators,and thermal management system.展开更多
Based on the radiation modes, an active control strategy is presented for sound radiation from elastic structures with an example of simply supported rectangular panel. The physical characteristics and mathematical me...Based on the radiation modes, an active control strategy is presented for sound radiation from elastic structures with an example of simply supported rectangular panel. The physical characteristics and mathematical meaning of the radiation modes are analyzed. The radiation efficiency of radiation mode falls off very rapidly with the increase of modes order at low frequency. A new control strategy is developed in which by canceling the adjoint coef- ficient of the first k radiation modes, the sound powers of the first k radiation modes is zero theoratically. The numerical calculation is made by using point force actuators as control forces.展开更多
文摘The radiation damage responses of ttuorinated and non-fluorinated lateral PNP transistors are studied with specially designed gated-controlled lateral PNP transistors that allow for the extraction of the oxide trapped charge （Not） and interface trap （Nit） densities. All the samples are exposed in the Co-60γ ray with the dose rate of 0.5 Gy（Si）/s. After the irradiation, the buildup of Not and Nit of the samples with total dose is investigated by the gate sweep test technique. The results show that the radiation resistance of fluorinated lateral PNP transistors is significantly enhanced compared with the non-fluorinated ones.
文摘The microwave radiation method was introduced to prepare the Fe_2O_3/SO solid superacid.Its structure and properties were investigated by means of X-ray diffraction and infrared spectrum analyses as well as measurement of magnetic susceptibility and rate of esterification. The structure of the superacids prepared in microwave field can be crystalline or non-crystalline, the latter has not been reported yet in literatures. Comparing with the traditional superacid, the non-crystalline Fe2O3/SO superacid prepared in microwave field has the highest magnetic susceptibility and catalytic activity. The di-coordination of Fe2O3 and SO and the S=O bi-bond were reinforced by microwave radiation, which is favorable for increasing the acid intensity of the Fe2O3/SO catalyst
文摘The solar temperature field of a large three-span continuous bridge with steel-concrete composite box girder and variable cross-section is measured to verify a calculation method for the temperature field of steel-concrete composite beams. The test results show that the temperature of an external steel web- plate is higher than that of an internal web-plate due to the difference in solar radiation. Air temperature inside the box matches the average temperature of the whole steel box. Based on actual measurements, a transient thermal analysis with multiple boundary conditions is also carried out by a software program ANSYS. Convective boundary situation and states of solar radiation on steel web plates in different situations are determined in the analysis. The feature of the temperature field is preliminarily achieved through a comparative study between the actual measurement and the finite element analysis. The computed results are in good consistence with the actual measurement results, with the maximum difference within 2 ℃. This indicates that the theoretical calculation method is reliable and it provides a foundation for further research on temperature field distribution in the steel-concrete composite box girder.
基金supported by the National Natural Science Foundation of China(No.11079049,11005141,10775150)the Major Project of Knowledge Innovation Program of Chinese Academy of Sciences(No.KJCX3.SYW.N3)
文摘Analyzing and understanding the effects of ambient pollution on plants is getting more and more attention as a topic of environmental biology.A method based on synchrotron radiation X-ray fluorescence and X-ray absorption near edge structure spectroscopy was established to analyze the sulfur concentration and speciation in mature camphor tree leaves （CTLs）,which were sampled from 5 local fields in Shanghai,China.Annual SO2 concentration,SO42-concentration in atmospheric particulate,SO42-and sulfur concentration in soil were also analyzed to explore the relationship between ambient sulfur sources and the sulfur nutrient cycling in CTLs.Total sulfur concentration in mature camphor tree leaves was 766-1704 mg/kg.The mainly detected sulfur states and their corresponding compounds were ＋6 （sulfate,include inorganic sulfate and organic sulfate）,＋5.2 （sulfonate）,＋2.2 （suloxides）,＋0.6 （thiols and thiothers）,＋0.2 （organic sulfides）.Total sulfur concentration was strongly correlated with sulfate proportion with a linear correlation coefficient up to 0.977,which suggested that sulfur accumulated in CTLs as sulfate form.Reduced sulfur compounds （organic sulfides,thiols,thioethers,sulfoxide and sulfonate） assimilation was sufficed to meet the nutrient requirement for growth at a balanced level around 526 mg/kg.The sulfate accumulation mainly caused by atmospheric sulfur pollution such as SO2 and airborne sulfate particulate instead of soil contamination.From urban to suburb place,sulfate in mature CTLs decreased as the atmospheric sulfur pollution reduced,but a dramatic increase presented near the seashore,where the marine sulfate emission and maritime activity pollution were significant.The sulfur concentration and speciation in mature CTLs effectively represented the long-term biological accumulation of atmospheric sulfur pollution in local environment.
基金Sponsored by the National Natural Science Foundation of China (50505047)Program for the Top Young Academic Leaders of Higher Learning Institutions of Shanxi
文摘With the purpose of efficiently predicting structural radiated noise of internal combustion engine（I.C.E.）,a new simulation technique is introduced,which is an approach based on boundary element method （BEM）,acoustic transfer vector（ATV） technique and coupled boundary element model and finite element model （BEM-FEM） approach.Analyses of vibration exciting loads,computing structural dynamic characteristics and dynamic responses have led to theoretical results,which are tested on an L6 diesel engine to validate this proposed technique in engineering practice.
基金This research was supported by the Funds for Key Scientific and Technological Projects of the 9th Five-Year Plan.
文摘According to the differences in ore-controlling structural systems and the characteristics of host rocks, textures and structures of ores and mineral associations of ores, quartz vein-type gold deposits in the Rushan area can be divided into the Rushan and Tongling styles. Rushan style gold deposits, occurring in the Kunyushan complex, include Rushan, Tangjiagou and Tongxishan gold mines. They are distributed along four NNE-trending and sinistral, compresso-shear faults with a right stepping array. A prominent characteristic of the gold mineralization is that the orebodies in neighbouring gold deposits distributed in a single ore-controlling fault zone take opposite pitches. Study of the locating structures of the quartz vein gold deposits shows that the Rushan-style gold deposits are characterized by NNE and NE zoning. Therefore, the intersections of the NE direction of the known gold deposit and the neighbouring NNE-trending fault zones are favourable for looking for gold deposits, and the ends of the curving segments of sinistral and right-stepping faults are favourable for looking for large gold deposits. Tongling-style gold deposits occur in the Sanfosan porphyritic monzonitic granite. Emplacement of gold deposits is controlled by arcuate and radiate structures formed during the intrusion of the Sanfoshan porphyritic monzonitic granite; the radiate faults controlled the distribution of orebodies and the arcuate faults controlled the pitch of the orebodies.
基金funded by the National Natural Science Foundation of China (Grant Nos.11375203,11675182 and 11690022)
文摘In this work,we study a direction dependent power spectrum in anisotropic Finsler spacetime. We use this direction dependent power spectrum to address the low-l power observed in WMAP and PLANCK data. The angular power spectrum of the temperature fluctuations has a lower amplitude in comparison to the ΛCDM model in the multipole range l = 2-40. Our theoretical model gives a correction to the isotropic angular power spectrum Cl^TT ldue to the breaking of rotational invariance of the primordial power spectrum. We estimate best-fit model parameters along with the six ΛCDM cosmological parameters using the PLANCK likelihood code in Cosmo MC software. We find that this modified angular power spectrum fits the CMB temperature data in the multipole range l = 2-10 to a good extent but fails for the whole multipole range l = 2-40.
文摘The solution to the state response of active constrained layer and the expression of the sound field radiated from the vibrating structure are given, and the damping mechanisms of active constrained layer (ACL) are discussed. Compaxisons are made with the passive constrained layer (PCL) and the traditional active control method in reducing the structural vibration. The numerical results indicate that: using the active constrained layer damping (ACLD) treatment to dissipate energyt not only the vibration amplitude of structtire is reduced, but also the sound radiated from vibrating structure is suppressed
基金National Natural Science Foundation of China (Grant No.52375237)National Science and Technology Major Project (Grant No.J2022-IV-0012)+1 种基金Opening Project of the Key Laboratory of CNC Equipment Reliability,Ministry of Education,Jilin University (Grant No.JLU-cncr-202402)Research Grants Council of the Hong Kong SAR of China (Grant No.PolyU 15209520).
文摘Structural modularization,lightweight and functional integration are the urgent devel-opment directions for next generation high-performance aeroengines.Heat concentration during aeroengine operation would lead to local high temperature,which tremendously negative impacts on aeroengine structural life and performance.Therefore,the design and optimization of radiator structures are significant for the efficiency and reliability of aeroengine.The structural geometry design and layout optimization of radiators is promising to improve the heat dissipation efficiency and reduce aerodynamic loss.The purpose of this study is to investigate the state of the art and perspectives of aeroengine radiator structural design by a comprehensive literature review.The main contents involve the review on the structural design and layout optimization technologies of radiator structures,the analyses of the structural features,design theory and methods of existed radiator structures,the induction of the theory and method of different radiators structural opti-mization design,and the discussion on the application perspectives of advanced structures in aeroengine radiators,the report on the current challenges and development directions of the design of radiator structures,including smart materials,lattice structures,variable structures,advanced optimization theories and methods,heat dissipation methods and so forth.The efforts of this study are promising to support the high-performance and lightweight design of aeroengine structures besides radiators,and thermal management system.
基金the National Natural Science Foundation of China (No.50075O36).
文摘Based on the radiation modes, an active control strategy is presented for sound radiation from elastic structures with an example of simply supported rectangular panel. The physical characteristics and mathematical meaning of the radiation modes are analyzed. The radiation efficiency of radiation mode falls off very rapidly with the increase of modes order at low frequency. A new control strategy is developed in which by canceling the adjoint coef- ficient of the first k radiation modes, the sound powers of the first k radiation modes is zero theoratically. The numerical calculation is made by using point force actuators as control forces.
