Objective: To establish a fluoregenic probe quantitative RT-PCR (FQ-RT-PCR) method for detection of the expression of MDR1 gene in tumor cells and to investigate the expression of MDR1 gene in patients with lung cance...Objective: To establish a fluoregenic probe quantitative RT-PCR (FQ-RT-PCR) method for detection of the expression of MDR1 gene in tumor cells and to investigate the expression of MDR1 gene in patients with lung cancer. Methods: The fluorogenic quantitative RT-PCR method for detection of the expression of MDR1 gene was established. K562/ADM and K562 cell lines or 45 tumor tissues from patients with lung cancer were examined on PE Applied Biosystems 7700 Sequence Detection machine. Results: the average levels of MDR1 gene expression in K562/ADM cells and K562 cells were (6.86±0.65)× 107 copies/μg RNA and (8.49±0.67)×105 copies/μg RNA, respectively. The former was 80.8 times greater than the latter. Each sample was measured 10 times and the coefficient variation (CV) was 9.5% and 7.9%, respectively. Various levels of MDR1 gene expression were detected in 12 of 45 patients with lung cancer. Conclusion: Quantitative detection of MDR1 gene expression in tumor cells was achieved by using FQ-RT-PCR. FQ-RT-PCR is an accurate, and sensitive method and easy to perform. Using this method, low levels of MDR1 gene expression could be detected in 24% of the patients with lung cancer.展开更多
The types and structures of inorganic pores are key factors in evaluations of the reservoir space and distribution characteristics of shale oil and gas.However,quantitative identification methods for pores of differen...The types and structures of inorganic pores are key factors in evaluations of the reservoir space and distribution characteristics of shale oil and gas.However,quantitative identification methods for pores of different inorganic components have not yet been fully developed.For this reason,a quantitative characterization method of inorganic pores using pixel information was proposed in this study.A machine learning algorithm was used to assist the field emission scanning electron microscopy(FE-SEM)image processing of shale to realize the accurate identification and quantitative characterization of inorganic pores on the surface of high-precision images of shale with a small view.Moreover,large-view image splicing technology,combined with quantitative evaluation of minerals by scanning electron microscopy(QEMSCAN)image joint characterization technology,was used to accurately analyze the distribution characteristics of inorganic pores under different mineral components.The quantitative methods of pore characteristics of different inorganic components under the pixel information of shale were studied.The results showed that(1)the Waikato Environment for Knowledge Analysis(WEKA)machine learning model can effectively identify and extract shale mineral components and inorganic pore distribution,and the large-view FE-SEM images are representative of samples at the 200μm×200μm view scale,meeting statistical requirements and eliminating the influence of heterogeneity;(2)the pores developed by different mineral components of shale had obvious differences,indicating that the development of inorganic pores is highly correlated with the properties of shale minerals themselves;and(3)the pore-forming ability of different mineral components is calculated by the quantitative method of single component pore-forming coefficient.Chlorite showed the highest pore-forming ability,followed by(in descending order)illite,pyrite,calcite,dolomite,albite,orthoclase,quartz,and apatite.This study contributes to advancing our understanding of inorganic pore characteristics in shale.展开更多
Soil quality is one of the most important environmental factors in sustaining the global biosphere and developing sustainable agricultural practices. A study was initiated in Wolong Nature Reserve, Sichuan Province, C...Soil quality is one of the most important environmental factors in sustaining the global biosphere and developing sustainable agricultural practices. A study was initiated in Wolong Nature Reserve, Sichuan Province, China to elucidate the soil quality changes of natural secondary succession, forest planting and agricultural practices after deforestation in the humid mountainous region. The soil qualities of six land use types (natural forestland, grassland, shrub land, secondary forestland, cultivated land and reforested land) were compared using two quantitative methods: the integrated soil quality index(QI) and soil deterioration index(DI). The QI values of natural forestland, grassland, shrub land, secondary forestland, cultivated land, reforested land were 0.8039, 0.3277, 0.9127, 0.6881, 0.0285 and 0.3183, respectively. The DI values were 0%, -14%, 12%, 1%, -26% and -18% respectively. Both indexes suggested that shrub land can restore soil properties. To compare the two methods more directly, a deduced index QI′ based on QI value was developed. The results showed that DI and QI′had a very high linear correlation coefficient (r=0.9775) despite the values were different. Both methods were efficient in evaluating the soil quality levels and DI was a more simple way in soil quality assessment, while QI could show more ecological meanings.展开更多
Objective:To develop and validate an image analysis method for quantitative analysis ofγ-oryzanol in cold pressed rice bran oil.Methods:TLC-densitometric and TLC-image analysis methods were developed,validated,and us...Objective:To develop and validate an image analysis method for quantitative analysis ofγ-oryzanol in cold pressed rice bran oil.Methods:TLC-densitometric and TLC-image analysis methods were developed,validated,and used for quantitative analysis of γ-oryzanol in cold pressed rice bran oil.The results obtained by these two different quantification methods were compared by paired t-test.Results:Both assays provided good linearity,accuracy,reproducibility and selectivity for determination of γ-oryzanol.Conclusions:The TLC-densitomelric and TLC-image analysis methods providett a similar reproducibility,accuracy and selectivity for the quantitative determination of γ-oryzanol in cold pressed rice bran oil.A statistical comparison of the quantitative determinations of γ-oryzanol in samples did not show any statistically significant difference between TLC-densitometric and TLC-image analysis methods.As both methods were found to be equal,they therefore can be used for the determination of γ-oryzanol in cold pressed rice bran oil.展开更多
Fuzzy mathematics is an important means to quantitatively evaluate the properties of fault sealing in petroleum reservoirs.To accurately study fault sealing,the comprehensive quantitative evaluation method of fuzzy ma...Fuzzy mathematics is an important means to quantitatively evaluate the properties of fault sealing in petroleum reservoirs.To accurately study fault sealing,the comprehensive quantitative evaluation method of fuzzy mathematics is improved based on a previous study.First,the single-factor membership degree is determined using the dynamic clustering method,then a single-factor evaluation matrix is constructed using a continuous grading function,and finally,the probability distribution of the evaluation grade in a fuzzy evaluation matrix is analyzed.In this study,taking the F1 fault located in the northeastern Chepaizi Bulge as an example,the sealing properties of faults in different strata are quantitatively evaluated using both an improved and an un-improved comprehensive fuzzy mathematics quantitative evaluation method.Based on current oil and gas distribution,it is found that our evaluation results before and after improvement are significantly different.For faults in＂best＂and＂poorest＂intervals,our evaluation results are consistent with oil and gas distribution.However,for the faults in＂good＂or＂poor＂intervals,our evaluation is not completelyconsistent with oil and gas distribution.The improved evaluation results reflect the overall and local sealing properties of target zones and embody the nonuniformity of fault sealing,indicating the improved method is more suitable for evaluating fault sealing under complicated conditions.展开更多
Quantitative level evaluation of cold-rolled strip was significant for the shape control and the product structure optimization. Based on the probability statistics method and the shape pattern recognition method, the...Quantitative level evaluation of cold-rolled strip was significant for the shape control and the product structure optimization. Based on the probability statistics method and the shape pattern recognition method, the shape evaluation model of cold-rolled strip was established to evaluate real-time shape of the online strip. The model was embedded in the shape control system, and the online strip shape state was real-time observed whether to meet the technical indicators, so the shape level could be identified and evaluated. Based on the shape evaluation indicators, the shape component could be well controlled to improve the shape hit rate and the control stability, so that the rolled strip shape could meet the technical requirements. At a 1050 cold strip mill, the shape data of the scene typical specifications strip were online collected and real-time evaluated, and the hit of macro shape in less than 8 I was 68.44%, indicating that the mill shape control had considerable room for improvement, as well as the evaluation method was feasible and practical for quantitative evaluation of the strip shape. So the new evaluation model has important guiding significance to increase value-added and reduce product quality objection.展开更多
Quantitative real-time reverse transcription-polymerase chain reaction （qRT-PCR） is widely used in studies of gene expression. In most of these studies, housekeeping genes are used as internal references without val...Quantitative real-time reverse transcription-polymerase chain reaction （qRT-PCR） is widely used in studies of gene expression. In most of these studies, housekeeping genes are used as internal references without validation. To identify appropriate reference genes for qRT-PCR in Pacific abalone Haliotis discus hannai, we examined the transcription stability of six housekeeping genes in abalone tissues in the presence and absence of bacterial infection. For this purpose, abalone were infected with the bacterial pathogen Fibrio anguillarum for 12 h and 48 h. The mRNA levels of the housekeeping genes in five tissues （digestive glands, foot muscle, gill, hemocyte, and mantle） were determined by qRT-PCR. The PCR data was subsequently analyzed with the geNorm and NormFinder algorithms. The results show that in the absence of bacterial infection, elongation factor-l-alpha and beta-actin were the most stably expressed genes in all tissues, and thus are suitable as cross-tissue type normalization factors. However, we did not identify any universal reference genes post infection because the most stable genes varied between tissue types. Furthermore, for most tissues, the optimal reference genes identified by both algorithms at 12 h and 48 h post-infection differed. These results indicate that bacterial infection induced significant changes in the expression of abalone housekeeping genes in a manner that is dependent on tissue type and duration of infection. As a result, different normalization factors must be used for different tissues at different infection points.展开更多
Four key stress thresholds exist in the compression process of rocks,i.e.,crack closure stress(σ_(cc)),crack initiation stress(σ_(ci)),crack damage stress(σ_(cd))and compressive strength(σ_(c)).The quantitative id...Four key stress thresholds exist in the compression process of rocks,i.e.,crack closure stress(σ_(cc)),crack initiation stress(σ_(ci)),crack damage stress(σ_(cd))and compressive strength(σ_(c)).The quantitative identifications of the first three stress thresholds are of great significance for characterizing the microcrack growth and damage evolution of rocks under compression.In this paper,a new method based on damage constitutive model is proposed to quantitatively measure the stress thresholds of rocks.Firstly,two different damage constitutive models were constructed based on acoustic emission(AE)counts and Weibull distribution function considering the compaction stages of the rock and the bearing capacity of the damage element.Then,the accumulative AE counts method(ACLM),AE count rate method(CRM)and constitutive model method(CMM)were introduced to determine the stress thresholds of rocks.Finally,the stress thresholds of 9 different rocks were identified by ACLM,CRM,and CMM.The results show that the theoretical stress−strain curves obtained from the two damage constitutive models are in good agreement with that of the experimental data,and the differences between the two damage constitutive models mainly come from the evolutionary differences of the damage variables.The results of the stress thresholds identified by the CMM are in good agreement with those identified by the AE methods,i.e.,ACLM and CRM.Therefore,the proposed CMM can be used to determine the stress thresholds of rocks.展开更多
The Laser Induced Breakdown Spectroscopy (LIBS) is a fast, non-contact, no sample preparation analytic technology;it is very suitable for on-line analysis of alloy composition. In the copper smelting industry, analysi...The Laser Induced Breakdown Spectroscopy (LIBS) is a fast, non-contact, no sample preparation analytic technology;it is very suitable for on-line analysis of alloy composition. In the copper smelting industry, analysis and control of the copper alloy concentration affect the quality of the products greatly, so LIBS is an efficient quantitative analysis tech- nology in the copper smelting industry. But for the lead brass, the components of Pb, Al and Ni elements are very low and the atomic emission lines are easily submerged under copper complex characteristic spectral lines because of the matrix effects. So it is difficult to get the online quantitative result of these important elements. In this paper, both the partial least squares (PLS) method and the calibration curve (CC) method are used to quantitatively analyze the laser induced breakdown spectroscopy data which is obtained from the standard lead brass alloy samples. Both the major and trace elements were quantitatively analyzed. By comparing the two results of the different calibration method, some useful results were obtained: both for major and trace elements, the PLS method was better than the CC method in quantitative analysis. And the regression coefficient of PLS method is compared with the original spectral data with background interference to explain the advantage of the PLS method in the LIBS quantitative analysis. Results proved that the PLS method used in laser induced breakdown spectroscopy was suitable for simultaneous quantitative analysis of different content elements in copper smelting industry.展开更多
Objective： To establish the method of real time fluorescence quantitative RT-PCR for detecting the expression of Survivin mRNA in nasopharyngeat carcinoma （NPC） tissues. Methods： The total RNA was extracted from N...Objective： To establish the method of real time fluorescence quantitative RT-PCR for detecting the expression of Survivin mRNA in nasopharyngeat carcinoma （NPC） tissues. Methods： The total RNA was extracted from NPC cell line CNE-2 and tissues with Trizol and then been transcribed reversely to cDNA, a method of real time fluorescence quantitative RT-PCR for detecting the expression of Survivin mRNA in NPC tissues had been established, in which chronic nasopharyn-gitis patients＇ nasopharynx tissues treated as control group. Results： The expression of Survivin mRNA all could be detected either in CNE-2 cells, NPC tissues or in chronic nasopharyngitis patients＇ nasopharynx tissues, and there was higher the expression level of Survivin mRNA in NPC tissues than which in chronic nasopharyngitis patients＇ nasopharynx tissues, the difference was significant （P 〈 0.01）. The expression of Survivin mRNA could be detected both in stage Ⅰ ＋ Ⅱ and stage Ⅲ ＋ Ⅳ NPC, and there was no significant difference in relative quantifications of gene expression between these two groups （P 〉 0.05）. There was no relationship between Survivin mRNA expression and age and sex of NPC patients （P 〉 0.05）. Conclusion： Real time fluorescence quantitative RT-PCR is a rapid, effective and high sensitive method for detecting the expression of Survivin mRNA in NPC tissues. The overexpression of Survivin mRNA may play some roles in pathogenesis of NPC.展开更多
Objective Oil-source faults have an important effect on reservoir formation and distribution in shallow formations with non- hydrocarbon generation in oil-rich fault-related basins （Jiang Youlu et al., 2015）. Howev...Objective Oil-source faults have an important effect on reservoir formation and distribution in shallow formations with non- hydrocarbon generation in oil-rich fault-related basins （Jiang Youlu et al., 2015）. However, the fault transporting capacity cannot be evaluated quantitatively at present. Taking the Zhanhua Sag in the Bohai Bay Basin as an example, this work analyzed the factors influencing the transporting capacity of the oil-source faults and proposed a quantitative method for evaluating their transporting capacity.展开更多
Objective： Multidrug resistance（MDR） is one of the most important reasons for treatment failure and recurrence of acute leukemia. Its manifestations are different in children with acute lymphoblastic leukemia（ALL...Objective： Multidrug resistance（MDR） is one of the most important reasons for treatment failure and recurrence of acute leukemia. Its manifestations are different in children with acute lymphoblastic leukemia（ALL） which may be due to different detection methods. This study was to detect the expression of MDR1 mRNA in bone marrow cells of children with ALL by real-time fluorescence- quantitative reverse transcription polymerase-chain reaction（FQ-RT-PCR）, and combine minimal residual desease（MRD） detection by flow cytometry（FCM） and to study their relationship with treatment response and prognosis of ALL. Methods：The MDR1 mRNA levels in bone marrow cells from 67 children with ALL[28 had newly diagnosed disease, 27 had achieved complete remission（CR）, 12 recurrent] and 22 children without leukemia were detected by FQ-RT-PCR. MRD was detected by FCM. The patients were observed for 9-101 months, with a median of 64 months. Results：Standard curves of human MDR1 and GAPDH genes were constructed successfully. MDR1 mRNA was detected in all children with a positive rate of 100%. The mRNA level of MDR1 was similar among the newly diagnosed ALL group, CR group, and control group（P 〉 0.05）, but significantly higher in the recurrence group than that in newly diagnosed disease group and control group（0.50 ± 0.55 vs. 0.09 ± 0.26 and 0.12 ± 0.23, P〈 0.05）. 54 ALL patients were followed up, and it was found that MDR1 mRNA level was significantly higher in ALL patients within 3 years duration than that of ALL patients with 3-6 years and over 6 years duration（0.63 ± 0.56 vs. 0.11 ± 0.12 and 0.04 ± 0.06, P〈 0.01）. For the 28 children with newly diagnosed disease, the MDR1 mRNA level was similar between WBC 〉 50 ~ 109 group and WBC〈50 × 10^9 group（P〉 0.05）. In the 33 CR patients, the MDR1 mRNA level was significantly higher in MRD〉10a group than that in MRD〈10a group（0.39 ± 0.47 vs. 0.03 ± 0.03, P 〈 0.05）. Conclusion：The sensitivity and specificity of FQ-RT-PCR in detecting MDR1 mRNA in bone marrowy cells of children with ALL patients are high. MDR1 mRNA is expressed in children with and without leukemia. MDR1 mRNA is highly expressed in the CR ALL patients with high MRD, recurrence and short duration（within 3 years）. Monitoring MRD and the MDR1 mRNA level might be helpful for individual treatment.展开更多
[ Objective] This study aimed to establish a simultaneous detection method of shrimp viruses by real-time fluorescence quantitative RT-PCR, to improve the efficiency of inspection and quarantine. [ Method] A novel rea...[ Objective] This study aimed to establish a simultaneous detection method of shrimp viruses by real-time fluorescence quantitative RT-PCR, to improve the efficiency of inspection and quarantine. [ Method] A novel real-time fluorescence quantitative RT-PCR assay was established and optimized for simultaneously detecting DNA/RNA of four shrimp viruses （WSSV, IHHNV, TSV and YHV ）. [ Result] The optimized real-time fluorescence quantitative RT-PCR system gener- ated typical amplification curves with high amplification efficiencies （E = 1.06, 1.07, 0.92 and 0.92, respectively）, good hnear relationship （ r = 1 ）, uniform repeatability （ standard deviation = 0.05 - 0.46 ; variation coefficient = 0.26% - 1.62% ） and high sensitivity, exhibiting no significant differences compared with re- al-time fluorescence quantitative PCR （average error of Ct value = 0.04 -0.40; T = 0.53 -2.50; P 〉 0.05 ）. The total detection time was about 1 h. [ Conclusion] The optimized real-time fluorescence quantitative RT-PCR system can be used for rapid detection of WSSV, IHHNV, TSV and YHV.展开更多
Curcuma wenyujin has been widely used as a traditional medicine in China. In this paper a strategy for the quantitative determination of the polysaccharide by a phenol-sulfuric acid method was described. Involved in t...Curcuma wenyujin has been widely used as a traditional medicine in China. In this paper a strategy for the quantitative determination of the polysaccharide by a phenol-sulfuric acid method was described. Involved in three factors, 5% phenol volume, H2SO4 volume, and temperature of water bath, we adopted the L9（3）3 orthogonal array design to gain the optimal colorimetric method. 3.0 ml of polysaccharide solution, 1.0 ml, 5% phenol and 7.0 ml H2SO4 were mixed with constant stirring in a glass vessel, and then kept in a water bath at 40 ℃. After cooling to room temperature for 20 min, the absorbance values were recorded by the UV-2501 PC spectrometer at the wavelength range of 485 nm. The polysaccharide content in Curcuma wenyujin were 3.21%, 3.23%, 3.20%, 3.18~/0, 3.22% and 2.38%, respectively. All results showed that this method was adequate, valid and applicable, may be applied to the determination of other bacterial polysaccharide as well.展开更多
A quantitative method using fluorescence spectro-photometer to detect theinterleukin 2 reocptor （IL 2R） on the surface of mononuclear cells in normal humanperipheral blood is described. For expression of IL 2R, the ...A quantitative method using fluorescence spectro-photometer to detect theinterleukin 2 reocptor （IL 2R） on the surface of mononuclear cells in normal humanperipheral blood is described. For expression of IL 2R, the optimum conoentration of PHA andCon A were 100 μg/ml and 10 μg/ml respectively. The PHA induced effect on mononuclear cellswas better than Con A induced one. The peak value of IL 2R cxpression was at the 24th h afterstimulation The optimum dilution of the first antibody （anti-Tac） was 1: 50, while the dilution ofthe second antibody（fluorescein conjugated rabbit anti-mousc IgG） was 1: 32 Their optimumincubation period was 20 and 10 min repectively. The concentration of fluorcscein-conjugatedantibody per 1×10<sup>6</sup> mononuclear cells from the same normal human peripheral blood was5.22±0.45×10<sup>-10</sup> mol, and the coefficient of variation was 8. 6%. The concentration offluorescein-conjugated antibody per 1×10<sup>6</sup>PBMC from five healthy individuals was 4. 8±0. 97×10<sup>-10</sup> mol Therefore this assay system is stable and quite reproducible.展开更多
Impurities from the raw materials, the grinding and the homogenization of the raw materials, the kiln instability and the complexity of the cooling step, all these factors make it difficult to obtain a perfect evaluat...Impurities from the raw materials, the grinding and the homogenization of the raw materials, the kiln instability and the complexity of the cooling step, all these factors make it difficult to obtain a perfect evaluation of the mineralogical composition of Portland clinker. We studied the limitations of the most commonly used quantitative methods and recommend some procedures to obtain reliable and reproducible results of quantitative analyses. Different clinker samples（provided by the Bizerte Cement Company（Tunisia）） were subjected to an elemental analysis by X-ray fluorescence and the mineralogical composition was determined by the Bogue calculation and by X-ray powder diffraction combined with the Rietveld method（Different softwares were used： XPert High Score Plus version 2.0 and TOPAS version 4.2）. We then compared the results obtained by the Rietveld method and the Bogue calculation to the specific peak areas of each phase. The content of each phase, determined by the Rietveld method, varied proportionally to the change in peak area; a significant difference in these results was found by using the elementary Bogue calculation.展开更多
A real-time quantitative optical method to characterize crack propagation in colloidal photonic crystal film（CPCF）is developed based on particle deformation models and previous real-time crack observations. The crac...A real-time quantitative optical method to characterize crack propagation in colloidal photonic crystal film（CPCF）is developed based on particle deformation models and previous real-time crack observations. The crack propagation process and temperature dependence of the crack propagation rate in CPCF are investigated. By this method, the crack propagation rate is found to slow down gradually to zero when cracks become more numerous and dense. Meanwhile, with the temperature increasing, the crack propagation rate constant decreases. The negative temperature dependence of the crack propagation rate is due to the increase of van der Waals attraction, which finally results in the decrease of resultant force. The findings provide new insight into the crack propagation process in CPCF.展开更多
基金a grant from the National New Technology Program (No. 1998-345).
文摘Objective: To establish a fluoregenic probe quantitative RT-PCR (FQ-RT-PCR) method for detection of the expression of MDR1 gene in tumor cells and to investigate the expression of MDR1 gene in patients with lung cancer. Methods: The fluorogenic quantitative RT-PCR method for detection of the expression of MDR1 gene was established. K562/ADM and K562 cell lines or 45 tumor tissues from patients with lung cancer were examined on PE Applied Biosystems 7700 Sequence Detection machine. Results: the average levels of MDR1 gene expression in K562/ADM cells and K562 cells were (6.86±0.65)× 107 copies/μg RNA and (8.49±0.67)×105 copies/μg RNA, respectively. The former was 80.8 times greater than the latter. Each sample was measured 10 times and the coefficient variation (CV) was 9.5% and 7.9%, respectively. Various levels of MDR1 gene expression were detected in 12 of 45 patients with lung cancer. Conclusion: Quantitative detection of MDR1 gene expression in tumor cells was achieved by using FQ-RT-PCR. FQ-RT-PCR is an accurate, and sensitive method and easy to perform. Using this method, low levels of MDR1 gene expression could be detected in 24% of the patients with lung cancer.
基金supported by the National Natural Science Foundation of China(42372144)the Natural Science Foundation of Xinjiang Uygur Autonomous Region(2024D01E09)the Strategic Cooperation Technology Projects of CNPC and CUPB(ZLZX2020-01-05).
文摘The types and structures of inorganic pores are key factors in evaluations of the reservoir space and distribution characteristics of shale oil and gas.However,quantitative identification methods for pores of different inorganic components have not yet been fully developed.For this reason,a quantitative characterization method of inorganic pores using pixel information was proposed in this study.A machine learning algorithm was used to assist the field emission scanning electron microscopy(FE-SEM)image processing of shale to realize the accurate identification and quantitative characterization of inorganic pores on the surface of high-precision images of shale with a small view.Moreover,large-view image splicing technology,combined with quantitative evaluation of minerals by scanning electron microscopy(QEMSCAN)image joint characterization technology,was used to accurately analyze the distribution characteristics of inorganic pores under different mineral components.The quantitative methods of pore characteristics of different inorganic components under the pixel information of shale were studied.The results showed that(1)the Waikato Environment for Knowledge Analysis(WEKA)machine learning model can effectively identify and extract shale mineral components and inorganic pore distribution,and the large-view FE-SEM images are representative of samples at the 200μm×200μm view scale,meeting statistical requirements and eliminating the influence of heterogeneity;(2)the pores developed by different mineral components of shale had obvious differences,indicating that the development of inorganic pores is highly correlated with the properties of shale minerals themselves;and(3)the pore-forming ability of different mineral components is calculated by the quantitative method of single component pore-forming coefficient.Chlorite showed the highest pore-forming ability,followed by(in descending order)illite,pyrite,calcite,dolomite,albite,orthoclase,quartz,and apatite.This study contributes to advancing our understanding of inorganic pore characteristics in shale.
文摘Soil quality is one of the most important environmental factors in sustaining the global biosphere and developing sustainable agricultural practices. A study was initiated in Wolong Nature Reserve, Sichuan Province, China to elucidate the soil quality changes of natural secondary succession, forest planting and agricultural practices after deforestation in the humid mountainous region. The soil qualities of six land use types (natural forestland, grassland, shrub land, secondary forestland, cultivated land and reforested land) were compared using two quantitative methods: the integrated soil quality index(QI) and soil deterioration index(DI). The QI values of natural forestland, grassland, shrub land, secondary forestland, cultivated land, reforested land were 0.8039, 0.3277, 0.9127, 0.6881, 0.0285 and 0.3183, respectively. The DI values were 0%, -14%, 12%, 1%, -26% and -18% respectively. Both indexes suggested that shrub land can restore soil properties. To compare the two methods more directly, a deduced index QI′ based on QI value was developed. The results showed that DI and QI′had a very high linear correlation coefficient (r=0.9775) despite the values were different. Both methods were efficient in evaluating the soil quality levels and DI was a more simple way in soil quality assessment, while QI could show more ecological meanings.
基金Supported by the Research Institute of Rangsit University,Pathum Thani,Thailand(Grant No.73/55)
文摘Objective:To develop and validate an image analysis method for quantitative analysis ofγ-oryzanol in cold pressed rice bran oil.Methods:TLC-densitometric and TLC-image analysis methods were developed,validated,and used for quantitative analysis of γ-oryzanol in cold pressed rice bran oil.The results obtained by these two different quantification methods were compared by paired t-test.Results:Both assays provided good linearity,accuracy,reproducibility and selectivity for determination of γ-oryzanol.Conclusions:The TLC-densitomelric and TLC-image analysis methods providett a similar reproducibility,accuracy and selectivity for the quantitative determination of γ-oryzanol in cold pressed rice bran oil.A statistical comparison of the quantitative determinations of γ-oryzanol in samples did not show any statistically significant difference between TLC-densitometric and TLC-image analysis methods.As both methods were found to be equal,they therefore can be used for the determination of γ-oryzanol in cold pressed rice bran oil.
基金supported by the Science and Technology Project of Universities and Colleges in Shandong Province ‘‘Investigation on diagenetic environment and transformation pattern of red-bed reservoirs in the rift basins’’ (No. J16LH52)
文摘Fuzzy mathematics is an important means to quantitatively evaluate the properties of fault sealing in petroleum reservoirs.To accurately study fault sealing,the comprehensive quantitative evaluation method of fuzzy mathematics is improved based on a previous study.First,the single-factor membership degree is determined using the dynamic clustering method,then a single-factor evaluation matrix is constructed using a continuous grading function,and finally,the probability distribution of the evaluation grade in a fuzzy evaluation matrix is analyzed.In this study,taking the F1 fault located in the northeastern Chepaizi Bulge as an example,the sealing properties of faults in different strata are quantitatively evaluated using both an improved and an un-improved comprehensive fuzzy mathematics quantitative evaluation method.Based on current oil and gas distribution,it is found that our evaluation results before and after improvement are significantly different.For faults in＂best＂and＂poorest＂intervals,our evaluation results are consistent with oil and gas distribution.However,for the faults in＂good＂or＂poor＂intervals,our evaluation is not completelyconsistent with oil and gas distribution.The improved evaluation results reflect the overall and local sealing properties of target zones and embody the nonuniformity of fault sealing,indicating the improved method is more suitable for evaluating fault sealing under complicated conditions.
基金Item Sponsored by the National Science and Technology Support Plan of China(2011BAF15B03)National Natural Science Foundation of China(51305387)Hebei Province Colleges and Universities Natural Science Research Youth Foundation of China(Q2012104)
文摘Quantitative level evaluation of cold-rolled strip was significant for the shape control and the product structure optimization. Based on the probability statistics method and the shape pattern recognition method, the shape evaluation model of cold-rolled strip was established to evaluate real-time shape of the online strip. The model was embedded in the shape control system, and the online strip shape state was real-time observed whether to meet the technical indicators, so the shape level could be identified and evaluated. Based on the shape evaluation indicators, the shape component could be well controlled to improve the shape hit rate and the control stability, so that the rolled strip shape could meet the technical requirements. At a 1050 cold strip mill, the shape data of the scene typical specifications strip were online collected and real-time evaluated, and the hit of macro shape in less than 8 I was 68.44%, indicating that the mill shape control had considerable room for improvement, as well as the evaluation method was feasible and practical for quantitative evaluation of the strip shape. So the new evaluation model has important guiding significance to increase value-added and reduce product quality objection.
基金Supported by the Knowledge Innovation Program of Chinese Academy of Sciences(No.KSCX2-EW-G-12B)the Knowledge Innovation Program of the Chinese Academy of Sciences(No.KZCX2-EW-Q213)the National High Technology Research and Development Program of China (863 Program)(No.2012AA10A412)
文摘Quantitative real-time reverse transcription-polymerase chain reaction （qRT-PCR） is widely used in studies of gene expression. In most of these studies, housekeeping genes are used as internal references without validation. To identify appropriate reference genes for qRT-PCR in Pacific abalone Haliotis discus hannai, we examined the transcription stability of six housekeeping genes in abalone tissues in the presence and absence of bacterial infection. For this purpose, abalone were infected with the bacterial pathogen Fibrio anguillarum for 12 h and 48 h. The mRNA levels of the housekeeping genes in five tissues （digestive glands, foot muscle, gill, hemocyte, and mantle） were determined by qRT-PCR. The PCR data was subsequently analyzed with the geNorm and NormFinder algorithms. The results show that in the absence of bacterial infection, elongation factor-l-alpha and beta-actin were the most stably expressed genes in all tissues, and thus are suitable as cross-tissue type normalization factors. However, we did not identify any universal reference genes post infection because the most stable genes varied between tissue types. Furthermore, for most tissues, the optimal reference genes identified by both algorithms at 12 h and 48 h post-infection differed. These results indicate that bacterial infection induced significant changes in the expression of abalone housekeeping genes in a manner that is dependent on tissue type and duration of infection. As a result, different normalization factors must be used for different tissues at different infection points.
基金Projects(2021RC3007,2020RC3090)supported by the Science and Technology Innovation Program of Hunan Province,ChinaProjects(52374150,52174099)supported by the National Natural Science Foundation of China。
文摘Four key stress thresholds exist in the compression process of rocks,i.e.,crack closure stress(σ_(cc)),crack initiation stress(σ_(ci)),crack damage stress(σ_(cd))and compressive strength(σ_(c)).The quantitative identifications of the first three stress thresholds are of great significance for characterizing the microcrack growth and damage evolution of rocks under compression.In this paper,a new method based on damage constitutive model is proposed to quantitatively measure the stress thresholds of rocks.Firstly,two different damage constitutive models were constructed based on acoustic emission(AE)counts and Weibull distribution function considering the compaction stages of the rock and the bearing capacity of the damage element.Then,the accumulative AE counts method(ACLM),AE count rate method(CRM)and constitutive model method(CMM)were introduced to determine the stress thresholds of rocks.Finally,the stress thresholds of 9 different rocks were identified by ACLM,CRM,and CMM.The results show that the theoretical stress−strain curves obtained from the two damage constitutive models are in good agreement with that of the experimental data,and the differences between the two damage constitutive models mainly come from the evolutionary differences of the damage variables.The results of the stress thresholds identified by the CMM are in good agreement with those identified by the AE methods,i.e.,ACLM and CRM.Therefore,the proposed CMM can be used to determine the stress thresholds of rocks.
文摘The Laser Induced Breakdown Spectroscopy (LIBS) is a fast, non-contact, no sample preparation analytic technology;it is very suitable for on-line analysis of alloy composition. In the copper smelting industry, analysis and control of the copper alloy concentration affect the quality of the products greatly, so LIBS is an efficient quantitative analysis tech- nology in the copper smelting industry. But for the lead brass, the components of Pb, Al and Ni elements are very low and the atomic emission lines are easily submerged under copper complex characteristic spectral lines because of the matrix effects. So it is difficult to get the online quantitative result of these important elements. In this paper, both the partial least squares (PLS) method and the calibration curve (CC) method are used to quantitatively analyze the laser induced breakdown spectroscopy data which is obtained from the standard lead brass alloy samples. Both the major and trace elements were quantitatively analyzed. By comparing the two results of the different calibration method, some useful results were obtained: both for major and trace elements, the PLS method was better than the CC method in quantitative analysis. And the regression coefficient of PLS method is compared with the original spectral data with background interference to explain the advantage of the PLS method in the LIBS quantitative analysis. Results proved that the PLS method used in laser induced breakdown spectroscopy was suitable for simultaneous quantitative analysis of different content elements in copper smelting industry.
基金the National Natural Science Foundation of China (No. 30460145).
文摘Objective： To establish the method of real time fluorescence quantitative RT-PCR for detecting the expression of Survivin mRNA in nasopharyngeat carcinoma （NPC） tissues. Methods： The total RNA was extracted from NPC cell line CNE-2 and tissues with Trizol and then been transcribed reversely to cDNA, a method of real time fluorescence quantitative RT-PCR for detecting the expression of Survivin mRNA in NPC tissues had been established, in which chronic nasopharyn-gitis patients＇ nasopharynx tissues treated as control group. Results： The expression of Survivin mRNA all could be detected either in CNE-2 cells, NPC tissues or in chronic nasopharyngitis patients＇ nasopharynx tissues, and there was higher the expression level of Survivin mRNA in NPC tissues than which in chronic nasopharyngitis patients＇ nasopharynx tissues, the difference was significant （P 〈 0.01）. The expression of Survivin mRNA could be detected both in stage Ⅰ ＋ Ⅱ and stage Ⅲ ＋ Ⅳ NPC, and there was no significant difference in relative quantifications of gene expression between these two groups （P 〉 0.05）. There was no relationship between Survivin mRNA expression and age and sex of NPC patients （P 〉 0.05）. Conclusion： Real time fluorescence quantitative RT-PCR is a rapid, effective and high sensitive method for detecting the expression of Survivin mRNA in NPC tissues. The overexpression of Survivin mRNA may play some roles in pathogenesis of NPC.
基金granted by the National Natural Science Foundation of China(grant No.41672131)Fundamental Research Funds for the Central Universities(grant No.16CX06045A)
文摘Objective Oil-source faults have an important effect on reservoir formation and distribution in shallow formations with non- hydrocarbon generation in oil-rich fault-related basins （Jiang Youlu et al., 2015）. However, the fault transporting capacity cannot be evaluated quantitatively at present. Taking the Zhanhua Sag in the Bohai Bay Basin as an example, this work analyzed the factors influencing the transporting capacity of the oil-source faults and proposed a quantitative method for evaluating their transporting capacity.
基金This work was supported by Science Project from Science and Tech- nology Department of HuBei province(2006AA301B56-3)
文摘Objective： Multidrug resistance（MDR） is one of the most important reasons for treatment failure and recurrence of acute leukemia. Its manifestations are different in children with acute lymphoblastic leukemia（ALL） which may be due to different detection methods. This study was to detect the expression of MDR1 mRNA in bone marrow cells of children with ALL by real-time fluorescence- quantitative reverse transcription polymerase-chain reaction（FQ-RT-PCR）, and combine minimal residual desease（MRD） detection by flow cytometry（FCM） and to study their relationship with treatment response and prognosis of ALL. Methods：The MDR1 mRNA levels in bone marrow cells from 67 children with ALL[28 had newly diagnosed disease, 27 had achieved complete remission（CR）, 12 recurrent] and 22 children without leukemia were detected by FQ-RT-PCR. MRD was detected by FCM. The patients were observed for 9-101 months, with a median of 64 months. Results：Standard curves of human MDR1 and GAPDH genes were constructed successfully. MDR1 mRNA was detected in all children with a positive rate of 100%. The mRNA level of MDR1 was similar among the newly diagnosed ALL group, CR group, and control group（P 〉 0.05）, but significantly higher in the recurrence group than that in newly diagnosed disease group and control group（0.50 ± 0.55 vs. 0.09 ± 0.26 and 0.12 ± 0.23, P〈 0.05）. 54 ALL patients were followed up, and it was found that MDR1 mRNA level was significantly higher in ALL patients within 3 years duration than that of ALL patients with 3-6 years and over 6 years duration（0.63 ± 0.56 vs. 0.11 ± 0.12 and 0.04 ± 0.06, P〈 0.01）. For the 28 children with newly diagnosed disease, the MDR1 mRNA level was similar between WBC 〉 50 ~ 109 group and WBC〈50 × 10^9 group（P〉 0.05）. In the 33 CR patients, the MDR1 mRNA level was significantly higher in MRD〉10a group than that in MRD〈10a group（0.39 ± 0.47 vs. 0.03 ± 0.03, P 〈 0.05）. Conclusion：The sensitivity and specificity of FQ-RT-PCR in detecting MDR1 mRNA in bone marrowy cells of children with ALL patients are high. MDR1 mRNA is expressed in children with and without leukemia. MDR1 mRNA is highly expressed in the CR ALL patients with high MRD, recurrence and short duration（within 3 years）. Monitoring MRD and the MDR1 mRNA level might be helpful for individual treatment.
文摘[ Objective] This study aimed to establish a simultaneous detection method of shrimp viruses by real-time fluorescence quantitative RT-PCR, to improve the efficiency of inspection and quarantine. [ Method] A novel real-time fluorescence quantitative RT-PCR assay was established and optimized for simultaneously detecting DNA/RNA of four shrimp viruses （WSSV, IHHNV, TSV and YHV ）. [ Result] The optimized real-time fluorescence quantitative RT-PCR system gener- ated typical amplification curves with high amplification efficiencies （E = 1.06, 1.07, 0.92 and 0.92, respectively）, good hnear relationship （ r = 1 ）, uniform repeatability （ standard deviation = 0.05 - 0.46 ; variation coefficient = 0.26% - 1.62% ） and high sensitivity, exhibiting no significant differences compared with re- al-time fluorescence quantitative PCR （average error of Ct value = 0.04 -0.40; T = 0.53 -2.50; P 〉 0.05 ）. The total detection time was about 1 h. [ Conclusion] The optimized real-time fluorescence quantitative RT-PCR system can be used for rapid detection of WSSV, IHHNV, TSV and YHV.
文摘Curcuma wenyujin has been widely used as a traditional medicine in China. In this paper a strategy for the quantitative determination of the polysaccharide by a phenol-sulfuric acid method was described. Involved in three factors, 5% phenol volume, H2SO4 volume, and temperature of water bath, we adopted the L9（3）3 orthogonal array design to gain the optimal colorimetric method. 3.0 ml of polysaccharide solution, 1.0 ml, 5% phenol and 7.0 ml H2SO4 were mixed with constant stirring in a glass vessel, and then kept in a water bath at 40 ℃. After cooling to room temperature for 20 min, the absorbance values were recorded by the UV-2501 PC spectrometer at the wavelength range of 485 nm. The polysaccharide content in Curcuma wenyujin were 3.21%, 3.23%, 3.20%, 3.18~/0, 3.22% and 2.38%, respectively. All results showed that this method was adequate, valid and applicable, may be applied to the determination of other bacterial polysaccharide as well.
文摘A quantitative method using fluorescence spectro-photometer to detect theinterleukin 2 reocptor （IL 2R） on the surface of mononuclear cells in normal humanperipheral blood is described. For expression of IL 2R, the optimum conoentration of PHA andCon A were 100 μg/ml and 10 μg/ml respectively. The PHA induced effect on mononuclear cellswas better than Con A induced one. The peak value of IL 2R cxpression was at the 24th h afterstimulation The optimum dilution of the first antibody （anti-Tac） was 1: 50, while the dilution ofthe second antibody（fluorescein conjugated rabbit anti-mousc IgG） was 1: 32 Their optimumincubation period was 20 and 10 min repectively. The concentration of fluorcscein-conjugatedantibody per 1×10<sup>6</sup> mononuclear cells from the same normal human peripheral blood was5.22±0.45×10<sup>-10</sup> mol, and the coefficient of variation was 8. 6%. The concentration offluorescein-conjugated antibody per 1×10<sup>6</sup>PBMC from five healthy individuals was 4. 8±0. 97×10<sup>-10</sup> mol Therefore this assay system is stable and quite reproducible.
文摘Impurities from the raw materials, the grinding and the homogenization of the raw materials, the kiln instability and the complexity of the cooling step, all these factors make it difficult to obtain a perfect evaluation of the mineralogical composition of Portland clinker. We studied the limitations of the most commonly used quantitative methods and recommend some procedures to obtain reliable and reproducible results of quantitative analyses. Different clinker samples（provided by the Bizerte Cement Company（Tunisia）） were subjected to an elemental analysis by X-ray fluorescence and the mineralogical composition was determined by the Bogue calculation and by X-ray powder diffraction combined with the Rietveld method（Different softwares were used： XPert High Score Plus version 2.0 and TOPAS version 4.2）. We then compared the results obtained by the Rietveld method and the Bogue calculation to the specific peak areas of each phase. The content of each phase, determined by the Rietveld method, varied proportionally to the change in peak area; a significant difference in these results was found by using the elementary Bogue calculation.
基金Project supported by the National Basic Research Program of China(Grant Nos.2012CB932903 and 2012CB932904)the National Natural Science Foundation of China(Grant Nos.51372270,11474333,and 21173260)
文摘A real-time quantitative optical method to characterize crack propagation in colloidal photonic crystal film（CPCF）is developed based on particle deformation models and previous real-time crack observations. The crack propagation process and temperature dependence of the crack propagation rate in CPCF are investigated. By this method, the crack propagation rate is found to slow down gradually to zero when cracks become more numerous and dense. Meanwhile, with the temperature increasing, the crack propagation rate constant decreases. The negative temperature dependence of the crack propagation rate is due to the increase of van der Waals attraction, which finally results in the decrease of resultant force. The findings provide new insight into the crack propagation process in CPCF.
