Volcanic terrains exhibit a complex structure of pyroclastic deposits interspersed with sedimentary processes,resulting in irregular lithological sequences that lack lateral continuity and distinct stratigraphic patte...Volcanic terrains exhibit a complex structure of pyroclastic deposits interspersed with sedimentary processes,resulting in irregular lithological sequences that lack lateral continuity and distinct stratigraphic patterns.This complexity poses significant challenges for slope stability analysis,requiring the development of specialized techniques to address these issues.This research presents a numerical methodology that incorporates spatial variability,nonlinear material characterization,and probabilistic analysis using a Monte Carlo framework to address this issue.The heterogeneous structure is represented by randomly assigning different lithotypes across the slope,while maintaining predefined global proportions.This contrasts with the more common approach of applying probabilistic variability to mechanical parameters within a homogeneous slope model.The material behavior is defined using complex nonlinear failure criteria,such as the Hoek-Brown model and a parabolic model with collapse,both implemented through linearization techniques.The Discontinuity Layout Optimization(DLO)method,a novel numerical approach based on limit analysis,is employed to efficiently incorporate these advances and compute the factor of safety of the slope.Within this framework,the Monte Carlo procedure is used to assess slope stability by conducting a large number of simulations,each with a different lithotype distribution.Based on the results,a hybrid method is proposed that combines probabilistic modeling with deterministic design principles for the slope stability assessment.As a case study,the methodology is applied to a 20-m-high vertical slope composed of three lithotypes(altered scoria,welded scoria,and basalt)randomly distributed in proportions of 15%,60%,and 25%,respectively.The results show convergence of mean values after approximately 400 simulations and highlight the significant influence of spatial heterogeneity,with variations of the factor of safety between 5 and 12 in 85%of cases.They also reveal non-circular and mid-slope failure wedges not captured by traditional stability methods.Finally,an equivalent normal probability distribution is proposed as a reliable approximation of the factor of safety for use in risk analysis and engineering decision-making.展开更多
As one of the micro-blocks dispersed in the South China Sea(SCS), the basement of the Xisha Islands has rarely been drilled because of the thick overlying Cenozoic sediments, which has led to a confused understanding ...As one of the micro-blocks dispersed in the South China Sea(SCS), the basement of the Xisha Islands has rarely been drilled because of the thick overlying Cenozoic sediments, which has led to a confused understanding of the pre-Cenozoic basement of the Xisha Islands. Well CK-1, a kilometer-scale major scientific drill in the Xisha Islands in the northwestern SCS, penetrated thick reefal limestone(0–888.4 m) and the underlying basement rocks(888.4–901.4 m). In this study, we present the zircon U-Pb ages of basement basaltic pyroclastic rocks from Well CK-1 in the Xisha Islands of the northwestern SCS to investigate the basement nature of the Xisha microblock. The basement of Well CK-1 consists of basaltic pyroclastic rocks on the seamount. The zircon grains yielded apparent ages ranging from ca. 2 138.9 Ma to ca. 36 Ma. The old group of zircon grains from Well CK-1 was considered to be inherited zircons. Two Cenozoic zircons gave a weighted mean 206Pb/238U age of(36.3 ± 1.1) Ma,Mean Squared Weighted Deviations(MSWD) = 1.2, which may represent the maximum age of the volcano eruption. The Yanshanian inherited zircons(116.9–105.7 Ma and 146.1–130.2 Ma) from Well CK-1 are consistent with the zircons from Well XK-1, indicating that the basement of Chenhang Island may be similar to that of Well XK-1. We propose that the Xisha micro-block may have developed on a uniform Late Jurassic metamorphic crystalline basement, intruded by Cretaceous granitic magma.展开更多
Ash-rich pyroclastic flows from the cataclysmic eruption of Mount Mazama (~7700 yr. B. P.), Cascade volcanic arc, Oregon, entered and blocked the narrow, bedrock-lined canyon of the Williamson River approximately 35 t...Ash-rich pyroclastic flows from the cataclysmic eruption of Mount Mazama (~7700 yr. B. P.), Cascade volcanic arc, Oregon, entered and blocked the narrow, bedrock-lined canyon of the Williamson River approximately 35 to 44 km from the source volcano. The blockage impounded a body of water which then released producing four stratigraphic units in the downstream debris fan. The four stratigraphic units are a boulder core comprised of locally sourced bedrock boulders and three sand-rich units including a fine-grained sand unit, a sandy pumice gravel (±basalt/hydrovolcanic tuff) unit, and a pumice pebble-bearing, crystal-rich sand unit. Hand-drilled auger holes up to ~1.6 m deep were used to obtain samples of the sand-rich units. Units were delimited using surface and down-hole observations, composition and texture, estimated density, statistical parameters of grain size, and vertical and lateral distribution of properties. Overtopping followed by rapid incision into the ash-rich pyroclastic flows progressively cleared the canyon, but a bedrock knickpoint near the head of the canyon limited the volume of debris available for transport to about 0.04 km<sup>3</sup> to 0.08 km<sup>3</sup>. Co-deposition of bedrock boulders and lithic-rich sand was followed by rapid deposition with minimal reworking of remobilized pyroclastics. Continued draining of the impounded lake sent hyperconcentrated flows onto the debris fan depositing pumice-rich gravels that graded upward to crystal-rich sands.展开更多
This study aimed to produce a high-quality landslide susceptibility map for Teziutlán municipality, a landslide-prone region in Mexico, which is characterised by a depositional pyroclastic ramp. The heterogeneous...This study aimed to produce a high-quality landslide susceptibility map for Teziutlán municipality, a landslide-prone region in Mexico, which is characterised by a depositional pyroclastic ramp. The heterogeneous quality of available topographic information(i.e. higher resolution digital elevation model only for a sub-region) encouraged to confront modelling results based on two different study area delineations and two raster resolutions. Input data was based on the larger modelling region L15(163 km2) and smaller S(70 km2; located inside L15) with an associated raster cell size of 15 m(region L15 and S15) and 5 m(region S5). The resulting three data sets(L15, S15 and S5) were included into three differently flexible modelling techniques(Generalized Linear Model-GLM, General Additive Model-GAM, Support Vector Machine-SVM) to produce nine landslide susceptibility models. Preceding variable selection was performed heuristically and supported by an exploratory data analysis. The final models were based on the explanatory variables slope angle, slope aspect, lithology, relative slope position, elevation, convergence index, distance to streams, distance to springs and topographic wetness index. The ability of the models to classify independent test data was elaborated using a k-fold cross validation procedure and the AUROC(Area Under the Receiver Operating Characteristic) metric. In general, all produced landslide susceptibility maps depicted the hillslopes of the ravines, which cut the pyroclastic ramp, as prone to landsliding. The modelling results showed that predictive performances(i.e. AUROC values) slightly increased with an increasing flexibility of the applied modelling technique. Thus, SVM performed best, while the GAM outperformed the GLM. This tendency was most distinctive when modelling with the largest landslide sample size(i.e. data set L15; n = 662 landslides). Non-linear classifiers(GAMs, SVMs) performed slightly better when trained on the basis of lower raster resolution(data set S15) compared to the 5 m counterparts(data set S5). Highest predictive performance was obtained for the model based on data set L15 and the SVM classifier(median AUROC: 0.82). However, SVMs also indicated the highest degree of model overfitting. This study indicates that the decision to delineate a study area, the selection of a raster resolution as well as the chosen classification technique can affect varying aspects of subsequent modelling results. The results do not support the assumption that a higher raster resolution(i.e. a more detailed digital representation of the terrain) inevitably leads to better performing or geomorphically more plausible landslide susceptibility maps.展开更多
By examining field outcrops, drilling cores and seismic data, it is concluded that the Middle and Late Permian “Emeishan basalts” in Western Sichuan Basin were developed in two large eruption cycles, and the two set...By examining field outcrops, drilling cores and seismic data, it is concluded that the Middle and Late Permian “Emeishan basalts” in Western Sichuan Basin were developed in two large eruption cycles, and the two sets of igneous rocks are in unconformable contact. The lower cycle is dominated by overflow volcanic rocks;while the upper cycle made up of pyroclastic flow volcanic breccia and pyroclastic lava is typical explosive facies accumulation. With high-quality micro-dissolution pores and ultra-fine dissolution pores, the upper cycle is a set of high-quality porous reservoir. Based on strong heterogeneity and great differences of pyroclastic flow subfacies from surrounding rocks in lithology and physical properties, the volcanic facies and volcanic edifices in Western Sichuan were effectively predicted and characterized by using seismic attribute analysis method and instantaneous amplitude and instantaneous frequency coherence analysis. The pyroclastic flow volcanic rocks are widely distributed in the Jianyang area. Centering around wells YT1, TF2 and TF8, the volcanic rocks in Jianyang area had 3edifice groups and an area of about 500 km^(2), which is the most favorable area for oil and gas exploration in volcanic rocks.展开更多
In the last five decades,Rare Earth Elements(REE)are mostly produced from carbonatite complexes and alkaline magmatic environments.In this respect,pyroclastic flows produced by the potassic-alkaline Gölcük v...In the last five decades,Rare Earth Elements(REE)are mostly produced from carbonatite complexes and alkaline magmatic environments.In this respect,pyroclastic flows produced by the potassic-alkaline Gölcük volcanism in the Isparta(SW,Turkey)angle stand out as an important target area where REE enrichments can be observed.This study focuses on the REE potential,geochemical and mineralogical characteristics of REE-bearing minerals as well as formation modeling of unconsolidated pyroclastic flows in Darıdere-Direkli-Yakaören(DDY)deposits in Turkey.REE-bearing minerals of DDY deposits which contain abundant trachytic-trachyandesitic rock fragments were determined as fluorapatite,britholite,and chevkinite by using XRD and SEM–EDX analyses.According to the geochemical analysis,the vast majority of RREE(up to 996 ppm)content is LREE such as La,Ce and Nd.Darıdere is the most REE enriched region followed by Yakaören and Direkli regions in terms of LREE(574.9 ppm),relative to MREE(38.5 ppm)and HREE(5.28 ppm)contents.These results are also on par with subduction-related Italian extrusive carbonatites such as Polino,Cupaello and San Venenzo.The DDY deposits can also be comparable with intraplate extrusive REE deposits in terms of LREE enrichments,however,HREE,Nb,Th and Zr values are generally lower.The RREE concentrations tend to rise with the increasing contents of alkaline elements(Na and K),HFSE(such as Nb and U),as well as LILE(Ba,Sr and Rb)and are negatively affected by sedimentary carbonate involvement.The economic value of the DDY deposits can gain importance due to the increasing global demand for LREE’s.展开更多
The Oligocene Afro-Arabian flood volcanic province contains significant silicic pyroclastic rocks (】60000 km^3 constituting up to 20%of the volcanic stratigraphy).Rhyolitic tephras,synchronous with the Afro-Arabian s...The Oligocene Afro-Arabian flood volcanic province contains significant silicic pyroclastic rocks (】60000 km^3 constituting up to 20%of the volcanic stratigraphy).Rhyolitic tephras,synchronous with the Afro-Arabian silicic pyroclastic rocks,are found in Indian Ocean ODP holes 711A.They are geoche-mically akin to the Afro-Arabian silicic pyroclastic rocks.This suggests that the tephras originated from Afro-Arabian silicic eruptions and represents more distal fallout of this volcanism.The temporal coin-展开更多
During the Late Paleozoic,West Junggar(Xinjiang,NW China)experienced a shift in tectonic setting from compression to extension.Ha'erjiao is an important area for investigating collisional structures,post–collisio...During the Late Paleozoic,West Junggar(Xinjiang,NW China)experienced a shift in tectonic setting from compression to extension.Ha'erjiao is an important area for investigating collisional structures,post–collisional structures,and magmatic activities.Based on the petrological and geochemical characteristics of pyroclastic and other volcanic rocks in the Permian Kalagang Formation from the borehole ZKH1205 in the Jimunai Basin,the main types of source rock for the pyroclastic rocks deposited in the basin are identified and their implications for the Early Permian tectonic setting examined.The abundance of basalt and andesite lithic fragments in the pyroclastic rocks,together with the REE characteristics and the contents of transition and high field strength elements show that the source rocks were chiefly intermediate–basic volcanic rocks.High ICV values,low CIA values,low Rb/Sr ratios,low Th/U ratios and the mineralogical features suggest weak chemical weathering of the source rocks;the geochemical patterns of the pyroclastic rocks might not only have been impacted by crustal contamination but also might be related to the nature of the magma from the source area.The geochemical properties of the pyroclastic rocks distinguish them from arc-related ones,and such samples plot in the within-plate basalt(WPB)field in some diagrams.This is consistent with the formation background of the Early Permian volcanic rocks in this region.展开更多
Fallout volcanic deposits of SommaVesuvius(Campania,southern Italy),characterized by the presence of layers with contrasting textural and hydraulic properties,are frequently affected by shallow landslides during rainw...Fallout volcanic deposits of SommaVesuvius(Campania,southern Italy),characterized by the presence of layers with contrasting textural and hydraulic properties,are frequently affected by shallow landslides during rainwater infiltration.The soils of the stratigraphic sequence present intraparticle pores,originated by the gases escaped during magma decompression in the volcanic conduit,thus are characterized by double porosity(i.e.,intraparticle and interparticle pores),which is expected to affect their hydraulic behaviour,and to play a key role in rainwater infiltration through layered deposits.To understand the effect of double porosity on the hydraulic behaviour of the involved soils,controlled experiments have been carried out in an infiltration column.The experimental apparatus is provided with newly designed non-invasive Time Domain Reflectometry(TDR)probes,not buried in the investigated soil layers so as to minimize disturbance to the flow,allowing water content measurement during vertical flow processes.Specifically,transient flow experiments are carried out through reconstituted specimens of black scoriae and grey pumices,both loose pyroclastic granular soils from fallout deposits of Somma-Vesuvius,featuring double porosity with different pore size distributions,that were estimated by X-ray tomography and Mercury Intrusion Porosimetry.The experimental results highlight the effects of the double porosity and clearly indicate the different behaviour of the two soils during wetting and drying processes,mainly related to the different dimensions of intraparticle pores.展开更多
The Java Island, Indonesia with abundant amount of pyroclastic deposits is located in the very active and dynamic Pacific Ring of Fires. Studying the geochemical weathering indices of these pyroclastic deposits is imp...The Java Island, Indonesia with abundant amount of pyroclastic deposits is located in the very active and dynamic Pacific Ring of Fires. Studying the geochemical weathering indices of these pyroclastic deposits is important to get a clear picture about weathering profiles on deposits resulting from the eruption of Mt. Merapi. Immediately after the first phase of the eruption （March to June 2006）, moist and leached pyroclastic deposits were collected. These pyroclastic deposits were found to be composed of volcanic glass, plagioclase feldspar in various propoitions, orthopyroxene, clinopyroxene, olivine, amphibole and titanomagnetite. The total elemental composition of the bulk samples （including trace elements and heavy metals） was determined by wet chemical methods and X-ray fluorescence （XRF） analyses. Weathering of the pyroelastic deposits was studied using various weathering indices. The Ruxton ratio, weathering index of Parker, Vought resudual index and chemical index of weathering of moist pyroclastic deposits were lower than those of the leached samples, but the alteration indices （chemical and plagioclase） were slightly higher in the moist compared to the leached pyroelastic deposits.展开更多
Many Propositions are made about the mechanism of emplacement of volcanoclastic material in the Bombay volcanic complex. The present paper deals exclusively with the physical features of the deposits laid by a complex...Many Propositions are made about the mechanism of emplacement of volcanoclastic material in the Bombay volcanic complex. The present paper deals exclusively with the physical features of the deposits laid by a complex tectono-magmatic process by making detailed inventory of the different kind of volcanic ejecta exposed in the Bomay Volcanic Complex (BVC), and an attempt has been made to classify the deposits genetically. A subsidenace which was hinted at earlier, may be a possible cauldron in BVC has been proposed, which might be responsible for producing such a varied and complex lithology.展开更多
Pyroclastics which are known natural pozzolanic materials due to amorphous contents, are present in several areas of the Mbepit Massif in West Cameroon. In this work natural pozzolan from three zones namely Pouoloum, ...Pyroclastics which are known natural pozzolanic materials due to amorphous contents, are present in several areas of the Mbepit Massif in West Cameroon. In this work natural pozzolan from three zones namely Pouoloum, Njimbouot and Nkouonja were characterized. A comparative study was then developed to attest the effect of these pyroclastics as partial substitution in portland cement. The mixtures were made at different pozzolanic proportions (00%, 10%, 15%, 25% and 35%) of substitution of the cement. The compressive and flexibility strength was carried out at 7, 28 and 90 days on mortar specimens (4 × 4 × 16 cm3). The results revealed apozzolanicactivity index of 81.99 %, 83.47% and 74.54% respectively for rock sample from Pouoloum (PCB), sample from Njimbouot (PCC) and sample from Nkouonja (PCN). After 90 days, for a substitution rate of 25% compressive strength are respectively 55.69 MPa, 60.4 MPa, 53.34 MPa for PCB, PCC and PCN. According to the American Society for Testing and Materials (ASTM) C618 classification, the pyroclastics are in accordance with all the criteria to be classified as pozzolan. Independent of the substitution rate, the mechanical performance increases with age in PCB, PCC and PCN. However PCC is most reactive than PCB and PCN. This may be due to the amorphous reactive content in this material and can be linked to the eruptive dynamisms which were more explosive in some areas than in others. The amorphous content is 32.01%, 36.99%, 24.84% for PCB, PCC and PCN respectively. These results also prove that Natural Pozzolan is interesting in the manufacture of composite cement CEM II, CEM IV in accordance with EN197-1 or can be added in mortar for buildings and sustainable environmental management.展开更多
As one of the micro-blocks dispersed in the South China Sea(SCS),the Xisha Islands are covered by thick Cenozoic sedimentary layers,making it challenging to obtain magmatic rocks.Well CK-2 is a kilometer-scale scienti...As one of the micro-blocks dispersed in the South China Sea(SCS),the Xisha Islands are covered by thick Cenozoic sedimentary layers,making it challenging to obtain magmatic rocks.Well CK-2 is a kilometer-scale scientific drilling project on the Xisha Islands in the northwestern SCS.It penetrates the thick reef limestone and reaches basaltic pyroclastic rocks.This study presents the whole-rock and olivine compositions of the basaltic volcaniclastic rocks from Well CK-2.These rocks exhibited ocean island basalt signatures characterized by the enrichment of light rare earth elements and high-field-strength elements.Compared with partial melting products derived from mantle peridotite,whole-rock compositions showed elevated Fe/Mn and Zn/Fe mass ratios.Additionally,olivines were characterized by a lower Ca content,higher Ni content,elevated Fe/Mn mass ratios,and moderate Mn/Zn mass ratios compared to those crystallized from peridotitic melts.The compositions of both the whole-rock and olivine phenocrysts indicate the presence of pyroxenite in the mantle source,which likely formed through the reaction of recycled oceanic crust with the surrounding mantle peridotite.Using the olivine-liquid Mg-Fe exchange thermometer,this study derived mantle potential temperatures(T_(p))ranging from 1502℃to 1756℃,which is consistent with those of plume-related ocean island basalts.Furthermore,the basaltic volcaniclastic rocks exhibit low H_(2)O contents(0.01%–1.47%),which were significantly lower than those found in the primary magmas of Large Igneous Provinces.These results suggest that the basaltic volcaniclastic rocks on the Xisha Islands originated from a volatile-poor mantle plume source.展开更多
A breakthrough has been recently made in the hydrocarbon exploration of the Permian pyroclastic rocks in the Jianyang Area,western Sichuan Basin,China.With an aim to decipher the impacts of the eruption environment,th...A breakthrough has been recently made in the hydrocarbon exploration of the Permian pyroclastic rocks in the Jianyang Area,western Sichuan Basin,China.With an aim to decipher the impacts of the eruption environment,the temperature of hydrothermal fluids,and the paleo-salinity on the formation of authigenic mineral assemblage and pores,this study implements comprehensive petrographic and geochemical studies through the integrated core and thin section analyses.The data presented demonstrate that the Permian volcanic intervals are intensively affected by an event of Emei taphrogeny.During basaltic magma upward migration,fractional crystallization of anorthose results in slightlyalkaline magma.The specific pyroclastic rocks are formed by the eruption of slightly-alkaline magma in the sea or a salt lake and subsequent hydrothermal alteration.During deposition and diagenesis,the authigenic mineral association is constrained jointly by the sodium-rich and high salinity water environment,and mid-high temperature,high-salinity hydrothermal fluid.Specifically,the sodium-rich hydrothermal fluid,which may sustain till the late diagenesis stage,caused pervasive albitization of pyroclastic rocks,then leading to mineral transformation and formation of a series of mineral associations.Therefore,zeolitization of volcanic glass and vesicle-infillings of zeolite is an essential condition for later mineral transformation and dissolution.Albitization of analcite,recrystallization induced by deep hydrothermal fluids,and both meteoric and deep burial dissolution expanding the micro-pore space ultimately formed porous pyroclastic reservoirs.展开更多
Study has been performed on the characteristics of the pyroclastic surge deposits in the northern Yandangshan area of Zhejiang Province. Based on this study and the relative research of other scholars, five major diag...Study has been performed on the characteristics of the pyroclastic surge deposits in the northern Yandangshan area of Zhejiang Province. Based on this study and the relative research of other scholars, five major diagnostic criteria of the deposits have been proposed. Moreover, the geological significance of the study on the deposits has been discussed.展开更多
Based on analysis of core observation, thin sections, cathodoluminescence, scanning electron microscope(SEM), etc., and geochemical testing of stable carbon and oxygen isotopes composition, element content, fluid incl...Based on analysis of core observation, thin sections, cathodoluminescence, scanning electron microscope(SEM), etc., and geochemical testing of stable carbon and oxygen isotopes composition, element content, fluid inclusions, and formation water, the fluid interaction mechanism and diagenetic reformation of fracture-pore basement reservoirs of epimetamorphic pyroclastic rock in the Beier Sag, Hailar Basin were studied. The results show that:(1) Two suites of reservoirs were developed in the basement, the weathering section and interior section, the interior section has a good reservoir zone reaching the standard of type I reservoir.(2) The secondary pores are formed by dissolution of carbonate minerals, feldspar, and tuff etc.(3) The diagenetic fluids include atmospheric freshwater, deep magmatic hydrothermal fluid, organic acids and hydrocarbon-bearing fluids.(4) The reservoir diagenetic reformation can be divided into four stages: initial consolidation, early supergene weathering-leaching, middle structural fracture-cementation-dissolution, and late organic acid-magmatic hydrothermal superimposed dissolution. Among them, the second and fourth stages are the stages for the formation of weathering crust and interior dissolution pore-cave reservoirs, respectively.展开更多
Based on the analysis of outcrop, seismic, logging and drilling data, combined with exploration practice, the characteristics,distribution, reservoir performance and gas-bearing properties of Permian igneous rocks in ...Based on the analysis of outcrop, seismic, logging and drilling data, combined with exploration practice, the characteristics,distribution, reservoir performance and gas-bearing properties of Permian igneous rocks in Sichuan Basin are studied. The study shows that central volcanic eruptive facies are developed in Sichuan Basin, and their lithological assemblages and distribution characteristics show obvious differences. The igneous rocks are mainly distributed in three regions: the southwestern part of the basin has dominantly largescale overflow facies basalts; the central and western part of the basin, Jianyang-Santai area, develop intrusive rocks, volcanic lavas(basalts)and pyroclastic rocks; and the eastern part of Sichuan, Dazhou-Liangping area, only develop diabase and basalts. Five aspects of understandings are achieved:(1) The Upper Permian igneous rocks can be divided into intrusive rocks and extrusive rocks, with the extrusive rocks as the main body. The chemical compositions of the extrusive rocks are characterized by both alkaline basalt and tholeiitic basalt, and belong to the subalkaline type of transitional basalt magma eruption.(2) There are obvious rhythmic structures vertically among overflow facies basalt, and the single rhythmic layer consists of, from bottom up, pyroclastic rocks(undeveloped), gray and dark gray porphyritic basalts(unstable), dark gray and purple microcrystalline-cryptocrystalline basalts, dark greyish green porous and amygdaloid basalts; the central volcanic eruption shows the rhythm and the vertical sequence of volcanic clastic rocks(agglomerates and breccias), volcanic lava, tuffaceous lava from bottom to top.(3) The pore types of basalt and pyroclastic rocks are diverse, mainly dissolution pore and de-vitrification micropore, but their physical properties are different. Basalt is characterized by ultra-low pore permeability, small reservoir thickness, and reservoirs are distributed in the upper and middle parts of the cycle, with poor lateral comparability. Volcanic clastic rocks are medium to high porous reservoirs(Well YT1: porosity: 8.66%?16.48%, average 13.76%) with large thickness and good reservoir quality.(4) Natural gas in basalts in southwestern basin mainly comes from Middle Permian, and natural gas in volcanic clastic rocks in central and western basin comes from Cambrian Qiongzhusi Formation.(5) Analysis of igneous reservoir-forming conditions in different areas shows that there are relatively insufficient gas sources and great differences in preservation conditions in southwestern basin.Reservoirs are poorly developed and gas-bearing is complex. The Jianyang-Santai area in the central and western part of Sichuan Basin has abundant hydrocarbon sources, developed reservoir, favorable preservation conditions and favorable gas geological conditions, and it is a favorable area for gas exploration.展开更多
The morphology, texture, grain size and other physicochemical characteristics of pyroclastic material from the first phases of the Puyehue-Cordon Caulle volcanic complex (PCCVC) eruption, (Southern Andes, Chile), can ...The morphology, texture, grain size and other physicochemical characteristics of pyroclastic material from the first phases of the Puyehue-Cordon Caulle volcanic complex (PCCVC) eruption, (Southern Andes, Chile), can be associated to the model recently reported for the magma storage and its ascent conditions. The eruption started June 4th 2011, and the studied volcanic material corresponds to that collected in Argentine territory at different distances from the source, between 4 and 12 June 2011. The explosive-effusive volcanic process of the first days occurred with the simultaneous emplacement of lava flows and the venting of pyroclastic material, ejecting two well differentiated types of particles. The more abundant was constituted by rhyolitic and light color pumice fragments, characterized by a typical vesicular texture, easy fragmentation and absence of occluded crystalline phases. Particles found in minor proportion were dark color, different in shape and texture and rich in Fe and Ti. They seemed to be more effective for the interaction with emitted gases in the upper part of the column, for this reason, they appeared partially covered by condensation products. The ascent conditions of the magma affected its rheological behavior through variations in the degassing, viscosity and fragmentation. On the other hand, distance to the source, depositional time, volcanic evolution and environmental conditions are factors that affect the chemical composition of collected ash. So, the SiO2/FeO ratio not only increases with the distance but also with the deposition time and volcanic activity. The work was done with the aid of several techniques such as a laser-sediment analyzer, X-ray diffraction (XRD), chemical analysis (bulk and surface), SEM microscopy and Raman “microprobe” spectroscopy. On the other hand, the physicochemical behavior of the pyroclastic material allows us to suggest eventual applications.展开更多
Energy cone is a unique but characteristic slope that describes the extent of deposits left around a volcano by various fiowage phenomena, usually regarded as the boundary of pyroclastic and the source region of lahar...Energy cone is a unique but characteristic slope that describes the extent of deposits left around a volcano by various fiowage phenomena, usually regarded as the boundary of pyroclastic and the source region of lahar. The energy cone value is determined as 0.07 by the energy-Hne model com- bined with the parameters of plume height and gradient, and the energy cone spread extent is defined by the numerical simulation method LAHARZ to simulate with this value based on the 1 ： 50 000 digi-tal elevation model of Tianchi （天池） Volcano, and the source region profiles in the north and south slope can prove the correctness of this threshold. This energy cone threshold and extent can be used as the reference of pyroelastic flow and lahar simulation.展开更多
基金the project PID2022-139202OB-I00Neural Networks and Optimization Techniques for the Design and Safe Maintenance of Transportation Infrastructures:Volcanic Rock Geotechnics and Slope Stability(IA-Pyroslope),funded by the Spanish State Research Agency of the Ministry of Science,Innovation and Universities of Spain and the European Regional Development Fund,MCIN/AEI/10.13039/501100011033/FEDER,EU。
文摘Volcanic terrains exhibit a complex structure of pyroclastic deposits interspersed with sedimentary processes,resulting in irregular lithological sequences that lack lateral continuity and distinct stratigraphic patterns.This complexity poses significant challenges for slope stability analysis,requiring the development of specialized techniques to address these issues.This research presents a numerical methodology that incorporates spatial variability,nonlinear material characterization,and probabilistic analysis using a Monte Carlo framework to address this issue.The heterogeneous structure is represented by randomly assigning different lithotypes across the slope,while maintaining predefined global proportions.This contrasts with the more common approach of applying probabilistic variability to mechanical parameters within a homogeneous slope model.The material behavior is defined using complex nonlinear failure criteria,such as the Hoek-Brown model and a parabolic model with collapse,both implemented through linearization techniques.The Discontinuity Layout Optimization(DLO)method,a novel numerical approach based on limit analysis,is employed to efficiently incorporate these advances and compute the factor of safety of the slope.Within this framework,the Monte Carlo procedure is used to assess slope stability by conducting a large number of simulations,each with a different lithotype distribution.Based on the results,a hybrid method is proposed that combines probabilistic modeling with deterministic design principles for the slope stability assessment.As a case study,the methodology is applied to a 20-m-high vertical slope composed of three lithotypes(altered scoria,welded scoria,and basalt)randomly distributed in proportions of 15%,60%,and 25%,respectively.The results show convergence of mean values after approximately 400 simulations and highlight the significant influence of spatial heterogeneity,with variations of the factor of safety between 5 and 12 in 85%of cases.They also reveal non-circular and mid-slope failure wedges not captured by traditional stability methods.Finally,an equivalent normal probability distribution is proposed as a reliable approximation of the factor of safety for use in risk analysis and engineering decision-making.
基金The National Natural Science Foundation of China under contract Nos 42030502, 42090041 and 42166003the Guangxi Scientific Projects under contract Nos AD17129063 and AA17204074+1 种基金the Guangxi Youth Science Fund Project under contract 2019GXNSFBA185016the Ph.D. Research Start-up Foundation of Guangxi University under contract No. XBZ170339。
文摘As one of the micro-blocks dispersed in the South China Sea(SCS), the basement of the Xisha Islands has rarely been drilled because of the thick overlying Cenozoic sediments, which has led to a confused understanding of the pre-Cenozoic basement of the Xisha Islands. Well CK-1, a kilometer-scale major scientific drill in the Xisha Islands in the northwestern SCS, penetrated thick reefal limestone(0–888.4 m) and the underlying basement rocks(888.4–901.4 m). In this study, we present the zircon U-Pb ages of basement basaltic pyroclastic rocks from Well CK-1 in the Xisha Islands of the northwestern SCS to investigate the basement nature of the Xisha microblock. The basement of Well CK-1 consists of basaltic pyroclastic rocks on the seamount. The zircon grains yielded apparent ages ranging from ca. 2 138.9 Ma to ca. 36 Ma. The old group of zircon grains from Well CK-1 was considered to be inherited zircons. Two Cenozoic zircons gave a weighted mean 206Pb/238U age of(36.3 ± 1.1) Ma,Mean Squared Weighted Deviations(MSWD) = 1.2, which may represent the maximum age of the volcano eruption. The Yanshanian inherited zircons(116.9–105.7 Ma and 146.1–130.2 Ma) from Well CK-1 are consistent with the zircons from Well XK-1, indicating that the basement of Chenhang Island may be similar to that of Well XK-1. We propose that the Xisha micro-block may have developed on a uniform Late Jurassic metamorphic crystalline basement, intruded by Cretaceous granitic magma.
文摘Ash-rich pyroclastic flows from the cataclysmic eruption of Mount Mazama (~7700 yr. B. P.), Cascade volcanic arc, Oregon, entered and blocked the narrow, bedrock-lined canyon of the Williamson River approximately 35 to 44 km from the source volcano. The blockage impounded a body of water which then released producing four stratigraphic units in the downstream debris fan. The four stratigraphic units are a boulder core comprised of locally sourced bedrock boulders and three sand-rich units including a fine-grained sand unit, a sandy pumice gravel (±basalt/hydrovolcanic tuff) unit, and a pumice pebble-bearing, crystal-rich sand unit. Hand-drilled auger holes up to ~1.6 m deep were used to obtain samples of the sand-rich units. Units were delimited using surface and down-hole observations, composition and texture, estimated density, statistical parameters of grain size, and vertical and lateral distribution of properties. Overtopping followed by rapid incision into the ash-rich pyroclastic flows progressively cleared the canyon, but a bedrock knickpoint near the head of the canyon limited the volume of debris available for transport to about 0.04 km<sup>3</sup> to 0.08 km<sup>3</sup>. Co-deposition of bedrock boulders and lithic-rich sand was followed by rapid deposition with minimal reworking of remobilized pyroclastics. Continued draining of the impounded lake sent hyperconcentrated flows onto the debris fan depositing pumice-rich gravels that graded upward to crystal-rich sands.
基金the financial support provided by CONACyT and DGAPA-UNAM PAPIIT through the Research Projects 156242 and IN300818, respectivelyCONACyT for granting a PhD scholarship and to Federica Fiorucci from CNR-IRPI Perugia, Italy, for supporting the generation of the landslide inventory
文摘This study aimed to produce a high-quality landslide susceptibility map for Teziutlán municipality, a landslide-prone region in Mexico, which is characterised by a depositional pyroclastic ramp. The heterogeneous quality of available topographic information(i.e. higher resolution digital elevation model only for a sub-region) encouraged to confront modelling results based on two different study area delineations and two raster resolutions. Input data was based on the larger modelling region L15(163 km2) and smaller S(70 km2; located inside L15) with an associated raster cell size of 15 m(region L15 and S15) and 5 m(region S5). The resulting three data sets(L15, S15 and S5) were included into three differently flexible modelling techniques(Generalized Linear Model-GLM, General Additive Model-GAM, Support Vector Machine-SVM) to produce nine landslide susceptibility models. Preceding variable selection was performed heuristically and supported by an exploratory data analysis. The final models were based on the explanatory variables slope angle, slope aspect, lithology, relative slope position, elevation, convergence index, distance to streams, distance to springs and topographic wetness index. The ability of the models to classify independent test data was elaborated using a k-fold cross validation procedure and the AUROC(Area Under the Receiver Operating Characteristic) metric. In general, all produced landslide susceptibility maps depicted the hillslopes of the ravines, which cut the pyroclastic ramp, as prone to landsliding. The modelling results showed that predictive performances(i.e. AUROC values) slightly increased with an increasing flexibility of the applied modelling technique. Thus, SVM performed best, while the GAM outperformed the GLM. This tendency was most distinctive when modelling with the largest landslide sample size(i.e. data set L15; n = 662 landslides). Non-linear classifiers(GAMs, SVMs) performed slightly better when trained on the basis of lower raster resolution(data set S15) compared to the 5 m counterparts(data set S5). Highest predictive performance was obtained for the model based on data set L15 and the SVM classifier(median AUROC: 0.82). However, SVMs also indicated the highest degree of model overfitting. This study indicates that the decision to delineate a study area, the selection of a raster resolution as well as the chosen classification technique can affect varying aspects of subsequent modelling results. The results do not support the assumption that a higher raster resolution(i.e. a more detailed digital representation of the terrain) inevitably leads to better performing or geomorphically more plausible landslide susceptibility maps.
基金Supported by the Scientific and Technological Major Project of the Southwest Oil and Gas Field Company (2019ZD01-03)。
文摘By examining field outcrops, drilling cores and seismic data, it is concluded that the Middle and Late Permian “Emeishan basalts” in Western Sichuan Basin were developed in two large eruption cycles, and the two sets of igneous rocks are in unconformable contact. The lower cycle is dominated by overflow volcanic rocks;while the upper cycle made up of pyroclastic flow volcanic breccia and pyroclastic lava is typical explosive facies accumulation. With high-quality micro-dissolution pores and ultra-fine dissolution pores, the upper cycle is a set of high-quality porous reservoir. Based on strong heterogeneity and great differences of pyroclastic flow subfacies from surrounding rocks in lithology and physical properties, the volcanic facies and volcanic edifices in Western Sichuan were effectively predicted and characterized by using seismic attribute analysis method and instantaneous amplitude and instantaneous frequency coherence analysis. The pyroclastic flow volcanic rocks are widely distributed in the Jianyang area. Centering around wells YT1, TF2 and TF8, the volcanic rocks in Jianyang area had 3edifice groups and an area of about 500 km^(2), which is the most favorable area for oil and gas exploration in volcanic rocks.
基金supported by the CAYDAG(1001)from the Scientific and Technological Research Council of Turkey(TUBITAK)。
文摘In the last five decades,Rare Earth Elements(REE)are mostly produced from carbonatite complexes and alkaline magmatic environments.In this respect,pyroclastic flows produced by the potassic-alkaline Gölcük volcanism in the Isparta(SW,Turkey)angle stand out as an important target area where REE enrichments can be observed.This study focuses on the REE potential,geochemical and mineralogical characteristics of REE-bearing minerals as well as formation modeling of unconsolidated pyroclastic flows in Darıdere-Direkli-Yakaören(DDY)deposits in Turkey.REE-bearing minerals of DDY deposits which contain abundant trachytic-trachyandesitic rock fragments were determined as fluorapatite,britholite,and chevkinite by using XRD and SEM–EDX analyses.According to the geochemical analysis,the vast majority of RREE(up to 996 ppm)content is LREE such as La,Ce and Nd.Darıdere is the most REE enriched region followed by Yakaören and Direkli regions in terms of LREE(574.9 ppm),relative to MREE(38.5 ppm)and HREE(5.28 ppm)contents.These results are also on par with subduction-related Italian extrusive carbonatites such as Polino,Cupaello and San Venenzo.The DDY deposits can also be comparable with intraplate extrusive REE deposits in terms of LREE enrichments,however,HREE,Nb,Th and Zr values are generally lower.The RREE concentrations tend to rise with the increasing contents of alkaline elements(Na and K),HFSE(such as Nb and U),as well as LILE(Ba,Sr and Rb)and are negatively affected by sedimentary carbonate involvement.The economic value of the DDY deposits can gain importance due to the increasing global demand for LREE’s.
文摘The Oligocene Afro-Arabian flood volcanic province contains significant silicic pyroclastic rocks (】60000 km^3 constituting up to 20%of the volcanic stratigraphy).Rhyolitic tephras,synchronous with the Afro-Arabian silicic pyroclastic rocks,are found in Indian Ocean ODP holes 711A.They are geoche-mically akin to the Afro-Arabian silicic pyroclastic rocks.This suggests that the tephras originated from Afro-Arabian silicic eruptions and represents more distal fallout of this volcanism.The temporal coin-
基金This research was funded by the National Science Foundation for Young Scientists of China(No.41602176)Key Laboratory of Tectonics and Petroleum Resources(TPR–2018–16).
文摘During the Late Paleozoic,West Junggar(Xinjiang,NW China)experienced a shift in tectonic setting from compression to extension.Ha'erjiao is an important area for investigating collisional structures,post–collisional structures,and magmatic activities.Based on the petrological and geochemical characteristics of pyroclastic and other volcanic rocks in the Permian Kalagang Formation from the borehole ZKH1205 in the Jimunai Basin,the main types of source rock for the pyroclastic rocks deposited in the basin are identified and their implications for the Early Permian tectonic setting examined.The abundance of basalt and andesite lithic fragments in the pyroclastic rocks,together with the REE characteristics and the contents of transition and high field strength elements show that the source rocks were chiefly intermediate–basic volcanic rocks.High ICV values,low CIA values,low Rb/Sr ratios,low Th/U ratios and the mineralogical features suggest weak chemical weathering of the source rocks;the geochemical patterns of the pyroclastic rocks might not only have been impacted by crustal contamination but also might be related to the nature of the magma from the source area.The geochemical properties of the pyroclastic rocks distinguish them from arc-related ones,and such samples plot in the within-plate basalt(WPB)field in some diagrams.This is consistent with the formation background of the Early Permian volcanic rocks in this region.
文摘Fallout volcanic deposits of SommaVesuvius(Campania,southern Italy),characterized by the presence of layers with contrasting textural and hydraulic properties,are frequently affected by shallow landslides during rainwater infiltration.The soils of the stratigraphic sequence present intraparticle pores,originated by the gases escaped during magma decompression in the volcanic conduit,thus are characterized by double porosity(i.e.,intraparticle and interparticle pores),which is expected to affect their hydraulic behaviour,and to play a key role in rainwater infiltration through layered deposits.To understand the effect of double porosity on the hydraulic behaviour of the involved soils,controlled experiments have been carried out in an infiltration column.The experimental apparatus is provided with newly designed non-invasive Time Domain Reflectometry(TDR)probes,not buried in the investigated soil layers so as to minimize disturbance to the flow,allowing water content measurement during vertical flow processes.Specifically,transient flow experiments are carried out through reconstituted specimens of black scoriae and grey pumices,both loose pyroclastic granular soils from fallout deposits of Somma-Vesuvius,featuring double porosity with different pore size distributions,that were estimated by X-ray tomography and Mercury Intrusion Porosimetry.The experimental results highlight the effects of the double porosity and clearly indicate the different behaviour of the two soils during wetting and drying processes,mainly related to the different dimensions of intraparticle pores.
基金supported by the Directorate of Higher Education Department of National Education of Republic of Indonesia under Fundamental Research Grant no: 005/SP3/PP/ DP2M/II/2006-2007, granted to the first authorthe Ministry of Research and Technology of the Republic Indonesia (Fundamental Research Intensive Program with grant no. 97/M/Kp/XI/ 2007) granted to first and second authors
文摘The Java Island, Indonesia with abundant amount of pyroclastic deposits is located in the very active and dynamic Pacific Ring of Fires. Studying the geochemical weathering indices of these pyroclastic deposits is important to get a clear picture about weathering profiles on deposits resulting from the eruption of Mt. Merapi. Immediately after the first phase of the eruption （March to June 2006）, moist and leached pyroclastic deposits were collected. These pyroclastic deposits were found to be composed of volcanic glass, plagioclase feldspar in various propoitions, orthopyroxene, clinopyroxene, olivine, amphibole and titanomagnetite. The total elemental composition of the bulk samples （including trace elements and heavy metals） was determined by wet chemical methods and X-ray fluorescence （XRF） analyses. Weathering of the pyroelastic deposits was studied using various weathering indices. The Ruxton ratio, weathering index of Parker, Vought resudual index and chemical index of weathering of moist pyroclastic deposits were lower than those of the leached samples, but the alteration indices （chemical and plagioclase） were slightly higher in the moist compared to the leached pyroelastic deposits.
文摘Many Propositions are made about the mechanism of emplacement of volcanoclastic material in the Bombay volcanic complex. The present paper deals exclusively with the physical features of the deposits laid by a complex tectono-magmatic process by making detailed inventory of the different kind of volcanic ejecta exposed in the Bomay Volcanic Complex (BVC), and an attempt has been made to classify the deposits genetically. A subsidenace which was hinted at earlier, may be a possible cauldron in BVC has been proposed, which might be responsible for producing such a varied and complex lithology.
文摘Pyroclastics which are known natural pozzolanic materials due to amorphous contents, are present in several areas of the Mbepit Massif in West Cameroon. In this work natural pozzolan from three zones namely Pouoloum, Njimbouot and Nkouonja were characterized. A comparative study was then developed to attest the effect of these pyroclastics as partial substitution in portland cement. The mixtures were made at different pozzolanic proportions (00%, 10%, 15%, 25% and 35%) of substitution of the cement. The compressive and flexibility strength was carried out at 7, 28 and 90 days on mortar specimens (4 × 4 × 16 cm3). The results revealed apozzolanicactivity index of 81.99 %, 83.47% and 74.54% respectively for rock sample from Pouoloum (PCB), sample from Njimbouot (PCC) and sample from Nkouonja (PCN). After 90 days, for a substitution rate of 25% compressive strength are respectively 55.69 MPa, 60.4 MPa, 53.34 MPa for PCB, PCC and PCN. According to the American Society for Testing and Materials (ASTM) C618 classification, the pyroclastics are in accordance with all the criteria to be classified as pozzolan. Independent of the substitution rate, the mechanical performance increases with age in PCB, PCC and PCN. However PCC is most reactive than PCB and PCN. This may be due to the amorphous reactive content in this material and can be linked to the eruptive dynamisms which were more explosive in some areas than in others. The amorphous content is 32.01%, 36.99%, 24.84% for PCB, PCC and PCN respectively. These results also prove that Natural Pozzolan is interesting in the manufacture of composite cement CEM II, CEM IV in accordance with EN197-1 or can be added in mortar for buildings and sustainable environmental management.
基金The National Natural Science Foundation of China under contract No.42030502the Guangxi Scientific Projects under contract Nos.AD17129063,AA17204074,and 2025GXNSFAA069324the NSFC project under contract No.42166003。
文摘As one of the micro-blocks dispersed in the South China Sea(SCS),the Xisha Islands are covered by thick Cenozoic sedimentary layers,making it challenging to obtain magmatic rocks.Well CK-2 is a kilometer-scale scientific drilling project on the Xisha Islands in the northwestern SCS.It penetrates the thick reef limestone and reaches basaltic pyroclastic rocks.This study presents the whole-rock and olivine compositions of the basaltic volcaniclastic rocks from Well CK-2.These rocks exhibited ocean island basalt signatures characterized by the enrichment of light rare earth elements and high-field-strength elements.Compared with partial melting products derived from mantle peridotite,whole-rock compositions showed elevated Fe/Mn and Zn/Fe mass ratios.Additionally,olivines were characterized by a lower Ca content,higher Ni content,elevated Fe/Mn mass ratios,and moderate Mn/Zn mass ratios compared to those crystallized from peridotitic melts.The compositions of both the whole-rock and olivine phenocrysts indicate the presence of pyroxenite in the mantle source,which likely formed through the reaction of recycled oceanic crust with the surrounding mantle peridotite.Using the olivine-liquid Mg-Fe exchange thermometer,this study derived mantle potential temperatures(T_(p))ranging from 1502℃to 1756℃,which is consistent with those of plume-related ocean island basalts.Furthermore,the basaltic volcaniclastic rocks exhibit low H_(2)O contents(0.01%–1.47%),which were significantly lower than those found in the primary magmas of Large Igneous Provinces.These results suggest that the basaltic volcaniclastic rocks on the Xisha Islands originated from a volatile-poor mantle plume source.
基金This work was granted by the National Natural Science Foundation of China(Grant No.41202109)the National Major Science and Technology Projects of China(Grant No.2016ZX05007004001)+1 种基金the Innovation Foundation of PetroChina Carbonate Key laboratory(RIPED-HZDZY-2019-JS-695)the China Scholarship Council.Thanks are expressed to our colleagues involved in igneous rocks researching in the Sichuan Basin,as well as to several anonymous reviewers from which this article has benefited.
文摘A breakthrough has been recently made in the hydrocarbon exploration of the Permian pyroclastic rocks in the Jianyang Area,western Sichuan Basin,China.With an aim to decipher the impacts of the eruption environment,the temperature of hydrothermal fluids,and the paleo-salinity on the formation of authigenic mineral assemblage and pores,this study implements comprehensive petrographic and geochemical studies through the integrated core and thin section analyses.The data presented demonstrate that the Permian volcanic intervals are intensively affected by an event of Emei taphrogeny.During basaltic magma upward migration,fractional crystallization of anorthose results in slightlyalkaline magma.The specific pyroclastic rocks are formed by the eruption of slightly-alkaline magma in the sea or a salt lake and subsequent hydrothermal alteration.During deposition and diagenesis,the authigenic mineral association is constrained jointly by the sodium-rich and high salinity water environment,and mid-high temperature,high-salinity hydrothermal fluid.Specifically,the sodium-rich hydrothermal fluid,which may sustain till the late diagenesis stage,caused pervasive albitization of pyroclastic rocks,then leading to mineral transformation and formation of a series of mineral associations.Therefore,zeolitization of volcanic glass and vesicle-infillings of zeolite is an essential condition for later mineral transformation and dissolution.Albitization of analcite,recrystallization induced by deep hydrothermal fluids,and both meteoric and deep burial dissolution expanding the micro-pore space ultimately formed porous pyroclastic reservoirs.
文摘Study has been performed on the characteristics of the pyroclastic surge deposits in the northern Yandangshan area of Zhejiang Province. Based on this study and the relative research of other scholars, five major diagnostic criteria of the deposits have been proposed. Moreover, the geological significance of the study on the deposits has been discussed.
基金Supported by the PetroChina Science and Technology Project(2017-5307034-000002).
文摘Based on analysis of core observation, thin sections, cathodoluminescence, scanning electron microscope(SEM), etc., and geochemical testing of stable carbon and oxygen isotopes composition, element content, fluid inclusions, and formation water, the fluid interaction mechanism and diagenetic reformation of fracture-pore basement reservoirs of epimetamorphic pyroclastic rock in the Beier Sag, Hailar Basin were studied. The results show that:(1) Two suites of reservoirs were developed in the basement, the weathering section and interior section, the interior section has a good reservoir zone reaching the standard of type I reservoir.(2) The secondary pores are formed by dissolution of carbonate minerals, feldspar, and tuff etc.(3) The diagenetic fluids include atmospheric freshwater, deep magmatic hydrothermal fluid, organic acids and hydrocarbon-bearing fluids.(4) The reservoir diagenetic reformation can be divided into four stages: initial consolidation, early supergene weathering-leaching, middle structural fracture-cementation-dissolution, and late organic acid-magmatic hydrothermal superimposed dissolution. Among them, the second and fourth stages are the stages for the formation of weathering crust and interior dissolution pore-cave reservoirs, respectively.
基金Supported by the Petrochina Science and Technology Project(2016E-0601)
文摘Based on the analysis of outcrop, seismic, logging and drilling data, combined with exploration practice, the characteristics,distribution, reservoir performance and gas-bearing properties of Permian igneous rocks in Sichuan Basin are studied. The study shows that central volcanic eruptive facies are developed in Sichuan Basin, and their lithological assemblages and distribution characteristics show obvious differences. The igneous rocks are mainly distributed in three regions: the southwestern part of the basin has dominantly largescale overflow facies basalts; the central and western part of the basin, Jianyang-Santai area, develop intrusive rocks, volcanic lavas(basalts)and pyroclastic rocks; and the eastern part of Sichuan, Dazhou-Liangping area, only develop diabase and basalts. Five aspects of understandings are achieved:(1) The Upper Permian igneous rocks can be divided into intrusive rocks and extrusive rocks, with the extrusive rocks as the main body. The chemical compositions of the extrusive rocks are characterized by both alkaline basalt and tholeiitic basalt, and belong to the subalkaline type of transitional basalt magma eruption.(2) There are obvious rhythmic structures vertically among overflow facies basalt, and the single rhythmic layer consists of, from bottom up, pyroclastic rocks(undeveloped), gray and dark gray porphyritic basalts(unstable), dark gray and purple microcrystalline-cryptocrystalline basalts, dark greyish green porous and amygdaloid basalts; the central volcanic eruption shows the rhythm and the vertical sequence of volcanic clastic rocks(agglomerates and breccias), volcanic lava, tuffaceous lava from bottom to top.(3) The pore types of basalt and pyroclastic rocks are diverse, mainly dissolution pore and de-vitrification micropore, but their physical properties are different. Basalt is characterized by ultra-low pore permeability, small reservoir thickness, and reservoirs are distributed in the upper and middle parts of the cycle, with poor lateral comparability. Volcanic clastic rocks are medium to high porous reservoirs(Well YT1: porosity: 8.66%?16.48%, average 13.76%) with large thickness and good reservoir quality.(4) Natural gas in basalts in southwestern basin mainly comes from Middle Permian, and natural gas in volcanic clastic rocks in central and western basin comes from Cambrian Qiongzhusi Formation.(5) Analysis of igneous reservoir-forming conditions in different areas shows that there are relatively insufficient gas sources and great differences in preservation conditions in southwestern basin.Reservoirs are poorly developed and gas-bearing is complex. The Jianyang-Santai area in the central and western part of Sichuan Basin has abundant hydrocarbon sources, developed reservoir, favorable preservation conditions and favorable gas geological conditions, and it is a favorable area for gas exploration.
文摘The morphology, texture, grain size and other physicochemical characteristics of pyroclastic material from the first phases of the Puyehue-Cordon Caulle volcanic complex (PCCVC) eruption, (Southern Andes, Chile), can be associated to the model recently reported for the magma storage and its ascent conditions. The eruption started June 4th 2011, and the studied volcanic material corresponds to that collected in Argentine territory at different distances from the source, between 4 and 12 June 2011. The explosive-effusive volcanic process of the first days occurred with the simultaneous emplacement of lava flows and the venting of pyroclastic material, ejecting two well differentiated types of particles. The more abundant was constituted by rhyolitic and light color pumice fragments, characterized by a typical vesicular texture, easy fragmentation and absence of occluded crystalline phases. Particles found in minor proportion were dark color, different in shape and texture and rich in Fe and Ti. They seemed to be more effective for the interaction with emitted gases in the upper part of the column, for this reason, they appeared partially covered by condensation products. The ascent conditions of the magma affected its rheological behavior through variations in the degassing, viscosity and fragmentation. On the other hand, distance to the source, depositional time, volcanic evolution and environmental conditions are factors that affect the chemical composition of collected ash. So, the SiO2/FeO ratio not only increases with the distance but also with the deposition time and volcanic activity. The work was done with the aid of several techniques such as a laser-sediment analyzer, X-ray diffraction (XRD), chemical analysis (bulk and surface), SEM microscopy and Raman “microprobe” spectroscopy. On the other hand, the physicochemical behavior of the pyroclastic material allows us to suggest eventual applications.
基金supported by the Natural Science Foundation of China (No. 40972209)the Special Projects of the Fundamental Scientific Research of the Institute of Geology, China Earthquake Administration (No. IGCEA1103)
文摘Energy cone is a unique but characteristic slope that describes the extent of deposits left around a volcano by various fiowage phenomena, usually regarded as the boundary of pyroclastic and the source region of lahar. The energy cone value is determined as 0.07 by the energy-Hne model com- bined with the parameters of plume height and gradient, and the energy cone spread extent is defined by the numerical simulation method LAHARZ to simulate with this value based on the 1 ： 50 000 digi-tal elevation model of Tianchi （天池） Volcano, and the source region profiles in the north and south slope can prove the correctness of this threshold. This energy cone threshold and extent can be used as the reference of pyroelastic flow and lahar simulation.
