Framework and basic parameters of a test bench for motor drive system of electric vehicle (EV) are illuminated. Two kinds of electric drive models, one was for the electric vehicle drived on real road, the other was f...Framework and basic parameters of a test bench for motor drive system of electric vehicle (EV) are illuminated. Two kinds of electric drive models, one was for the electric vehicle drived on real road, the other was for that on test bench, are put forward. Then, dynamic analysis of these models is made in detail. Inertia matching method of the test bench is researched and some useful formulas and graphs are brought forward. The experiment of an electric bus is introduced in order to explain the usage of this inertia matching method.展开更多
Objective To describe changes that occur in stent morphology and structure after its implantation in coronary bifurcation.Side branch (SB) compromise after stenting of main vessel in coronary bifurcation is a major in...Objective To describe changes that occur in stent morphology and structure after its implantation in coronary bifurcation.Side branch (SB) compromise after stenting of main vessel in coronary bifurcation is a major intraprocedural problem and for the long term,as a place of restenosis.Methods We created an elastic wall model (parent vessel diameter 3.5mm,daughter branches 3.5mm and 2.75mm)with 30,45 and 60 degree distal angulation between branches.After stent implantation,struts to the side branch were opened with 2.0mm and consequently 3.0mm diameter balloons.Subsequent balloon redilatations and kissing balloon inflations (KBI) were performed.All stages of the procedure were photographed with magnification up to 100 times.Results We found that the leading mechanism for side branch compromise was carina displacement,and discovered theoretical description for expected ostial stenosis severity.Based on our model we found that displacement of bifurcation flow divider cause SB stenosis with almost perfect coincidence with our theoretical predictions.Opening of stent cells through the proximal and distal stent struts always increased interslrut distance,but never achieved good apposition to the wall.Balloon diameter increase didn't give proportional enlargement in stent cell diameters.KBI leads to some small better stent positioning,correcting main vessel strut dislodgment from wall,but never gave full strut-wall contact.Distance between struts and wall was minimal only when the stent cell perfectly faced ostium of SB.This was also our observation that the shape of ostium of SB becomed eUiptically-bean shaped after stent implantation and generally kept that shape during consequent stages of experiment.Measured diameter and area stenosis were perfectly fitted and theoretically predicted from our concept Conclusion We have described stent-wall deformations in stent-balloon technique for treatment of coronary bifurcation demonstrating carina displacement as possibly main mechanism of side branch compromise after main vessel stenting.We have shown that KBI could not give full strut-wall contact if there is no perfect facing of stem cell and SB ostium.(J Geroatr Cardool 2008;5(1):43-49)展开更多
A unit pump test bench is developed on an in-line pump test platform. The bench is composed of pump adapting assembly, fuel supply subsystem, lubricating subsystem and a control unit. A crank angle domain injection co...A unit pump test bench is developed on an in-line pump test platform. The bench is composed of pump adapting assembly, fuel supply subsystem, lubricating subsystem and a control unit. A crank angle domain injection control method is given out and the control accuracy can be 0.1° crank degree. The bench can test both mechanical unit pump and electronic unit pump. A test model-PLD12 electronic unit pump is tested. Full pump delivery map and some influence factors test is done. Experimental results show that the injection quantity is linear with the delivery angle. The quantity change rate is 15% when fuel temperature increases 30 ℃. The delivery quantity per cycle increases 30 mg at 28 V drive voltage. The average delivery difference for two same type pumps is 5 %. Test results show that the bench can be used for unit pump verification.展开更多
Performance characterization for massive photomultiplier tubes(PMTs) is a frequently encountered procedure in large nuclear and particle experiments.To facilitate this work,a dedicated test bench system has been devel...Performance characterization for massive photomultiplier tubes(PMTs) is a frequently encountered procedure in large nuclear and particle experiments.To facilitate this work,a dedicated test bench system has been developed at the Institute of Modern Physics,Chinese Academy of Sciences.The two-dimensional photocathode position scanning capability is an intrinsic function of the test bench,and up to 25 PMTs,with the diameter smaller than 2",can be tested simultaneously.The parameters of the light source pulses can be adjusted in a wide range,thus making it suitable for various characteristics measurements.The test bench system is highly automated with all the controlling operations integrated into a single software.Additionally,the hardware platform is extensible which allows complex testing schemes,and the modularity in the software design makes the migration from one testing configuration to another light-weight and efficient.All these features make the test bench versatile and reusable in different experiments.It has been first used in the construction of the Plastic Scintillator Detector(PSD) of DArk Matter Particle Explorer(DAMPE),and a total of 570 Hamamatsu R4443 tubes were tested successfully.The performance was verified and the testing results are also reported in this article.展开更多
At present moment, there is a great interest in development of information systems operating in cloud infrastructures. Generally, many of tasks remain unresolved such as tasks of optimization of large databases in a h...At present moment, there is a great interest in development of information systems operating in cloud infrastructures. Generally, many of tasks remain unresolved such as tasks of optimization of large databases in a hybrid cloud infrastructure, quality of service (QoS) at different levels of cloud services, dynamic control of distribution of cloud resources in application systems and many others. Research and development of new solutions can be limited in case of using emulators or international commercial cloud services, due to the closed architecture and limited opportunities for experimentation. Article provides answers to questions on the establishment of a pilot cloud practically “at home” with the ability to adjust the width of the emulation channel and delays in data transmission. It also describes architecture and configuration of the experimental setup. The proposed modular structure can be expanded by available computing power.展开更多
For development of passenger electrical transport, it is necessary to use energy more rationally. One of methods of vehicle power efficiency increase is installation of on-board energy storage systems. For studying of...For development of passenger electrical transport, it is necessary to use energy more rationally. One of methods of vehicle power efficiency increase is installation of on-board energy storage systems. For studying of system operation, it is necessary to carry out a lot of experiments, therefore it is favorable to use the test bench and its computer model for reduction of the number of physical experiments. In this article, the results of computer modeling for the optimization of traction drive test bench by adjusting of the operation parameters of supercapacitor energy storage are described. Test bench operation is considered in cases of the energy storage system working at various selected supercapacitor initial voltages. Maximal increase of possibility of vehicle test bench regenerative braking with minimal decrease of autonomous power supply mode possibility is investigated. There is estimated the energy storage system efficiency improving measures dependence from supercapacitor operational voltage ranges. Parameters at which the minimum losses of energy are observed are revealed. Dependence of energy storage system discharge power on the most admissible supercapacitor current is established.展开更多
In this paper, the TAS-I （Thales Alenia Space-Italy） Test Bench for Robotics and Autonomy （TBRA） is presented. It is based on a flexible and modular software architecture （Framework Engine）, in which each functi...In this paper, the TAS-I （Thales Alenia Space-Italy） Test Bench for Robotics and Autonomy （TBRA） is presented. It is based on a flexible and modular software architecture （Framework Engine）, in which each functional module （representing the GNC subsystems） implements a key functionality of the GNC （Guidance Navigation and Control）. Modules communicate by means of standardised interfaces designed for exchange of necessary information among the modules composing the entire system. This approach permits the interchange-ability of each subsystem without affecting the overall functionalities of the GNC system. In this paper, the TBRA system, together with the implemented functional modules will be described. Tests results will be reported and future development will be discussed.展开更多
The automotive and lubricant industries have been placing increased emphasis on the fuel economy benefits of today′s modern passenger car motor oils.The current ILSAC GF-4 specification has more stringent requirement...The automotive and lubricant industries have been placing increased emphasis on the fuel economy benefits of today′s modern passenger car motor oils.The current ILSAC GF-4 specification has more stringent requirements than previous ILSAC specifications,and the proposed future ILSAC GF-5 specification is looking at further improvements in the lubricant′s fuel economy performance.To address these needs,Afton Chemical has developed correlations between the rheological and frictional properties of oils and fuel economy measured in engine and field tests.In this paper we will present correlations between lubricants′ physical properties and fuel economy measured in vehicles and engine tests.These tools have been used to develop current commercial oils which are being used extensively to meet today′s OEM needs.展开更多
This paper introduces a kind of substitute bench testing method for vehicle application development and testing method of the test requirements,including battery fast conversion cycle test equipment,enter type incubat...This paper introduces a kind of substitute bench testing method for vehicle application development and testing method of the test requirements,including battery fast conversion cycle test equipment,enter type incubator,liquid-cooled machine and ancillary equipment composed of a set of test system,through the walk-in constant temperature box to simulate the new energy vehicles under different environmental conditions of the test requirements,Liquid-cooled machine and auxiliary parts to complete the battery thermal management system need cooling fluid conditions,the battery conversion cycle test equipment to simulate the dc fast charging way of filling pile,complete battery thermal management system test,shorten the filling fast charging time and improve battery fast charge security,for troubleshooting and data collection and analysis,Improve work efficiency,save costs,and eliminate customer anxiety about battery life and charging time.展开更多
文摘Framework and basic parameters of a test bench for motor drive system of electric vehicle (EV) are illuminated. Two kinds of electric drive models, one was for the electric vehicle drived on real road, the other was for that on test bench, are put forward. Then, dynamic analysis of these models is made in detail. Inertia matching method of the test bench is researched and some useful formulas and graphs are brought forward. The experiment of an electric bus is introduced in order to explain the usage of this inertia matching method.
文摘Objective To describe changes that occur in stent morphology and structure after its implantation in coronary bifurcation.Side branch (SB) compromise after stenting of main vessel in coronary bifurcation is a major intraprocedural problem and for the long term,as a place of restenosis.Methods We created an elastic wall model (parent vessel diameter 3.5mm,daughter branches 3.5mm and 2.75mm)with 30,45 and 60 degree distal angulation between branches.After stent implantation,struts to the side branch were opened with 2.0mm and consequently 3.0mm diameter balloons.Subsequent balloon redilatations and kissing balloon inflations (KBI) were performed.All stages of the procedure were photographed with magnification up to 100 times.Results We found that the leading mechanism for side branch compromise was carina displacement,and discovered theoretical description for expected ostial stenosis severity.Based on our model we found that displacement of bifurcation flow divider cause SB stenosis with almost perfect coincidence with our theoretical predictions.Opening of stent cells through the proximal and distal stent struts always increased interslrut distance,but never achieved good apposition to the wall.Balloon diameter increase didn't give proportional enlargement in stent cell diameters.KBI leads to some small better stent positioning,correcting main vessel strut dislodgment from wall,but never gave full strut-wall contact.Distance between struts and wall was minimal only when the stent cell perfectly faced ostium of SB.This was also our observation that the shape of ostium of SB becomed eUiptically-bean shaped after stent implantation and generally kept that shape during consequent stages of experiment.Measured diameter and area stenosis were perfectly fitted and theoretically predicted from our concept Conclusion We have described stent-wall deformations in stent-balloon technique for treatment of coronary bifurcation demonstrating carina displacement as possibly main mechanism of side branch compromise after main vessel stenting.We have shown that KBI could not give full strut-wall contact if there is no perfect facing of stem cell and SB ostium.(J Geroatr Cardool 2008;5(1):43-49)
基金the Ministerial Level Advanced Research Foundation (404050301 .4)
文摘A unit pump test bench is developed on an in-line pump test platform. The bench is composed of pump adapting assembly, fuel supply subsystem, lubricating subsystem and a control unit. A crank angle domain injection control method is given out and the control accuracy can be 0.1° crank degree. The bench can test both mechanical unit pump and electronic unit pump. A test model-PLD12 electronic unit pump is tested. Full pump delivery map and some influence factors test is done. Experimental results show that the injection quantity is linear with the delivery angle. The quantity change rate is 15% when fuel temperature increases 30 ℃. The delivery quantity per cycle increases 30 mg at 28 V drive voltage. The average delivery difference for two same type pumps is 5 %. Test results show that the bench can be used for unit pump verification.
基金supported by the Strategic Priority Research Program of the Chinese Academy of Science(No.XDA04040202-3)
文摘Performance characterization for massive photomultiplier tubes(PMTs) is a frequently encountered procedure in large nuclear and particle experiments.To facilitate this work,a dedicated test bench system has been developed at the Institute of Modern Physics,Chinese Academy of Sciences.The two-dimensional photocathode position scanning capability is an intrinsic function of the test bench,and up to 25 PMTs,with the diameter smaller than 2",can be tested simultaneously.The parameters of the light source pulses can be adjusted in a wide range,thus making it suitable for various characteristics measurements.The test bench system is highly automated with all the controlling operations integrated into a single software.Additionally,the hardware platform is extensible which allows complex testing schemes,and the modularity in the software design makes the migration from one testing configuration to another light-weight and efficient.All these features make the test bench versatile and reusable in different experiments.It has been first used in the construction of the Plastic Scintillator Detector(PSD) of DArk Matter Particle Explorer(DAMPE),and a total of 570 Hamamatsu R4443 tubes were tested successfully.The performance was verified and the testing results are also reported in this article.
文摘At present moment, there is a great interest in development of information systems operating in cloud infrastructures. Generally, many of tasks remain unresolved such as tasks of optimization of large databases in a hybrid cloud infrastructure, quality of service (QoS) at different levels of cloud services, dynamic control of distribution of cloud resources in application systems and many others. Research and development of new solutions can be limited in case of using emulators or international commercial cloud services, due to the closed architecture and limited opportunities for experimentation. Article provides answers to questions on the establishment of a pilot cloud practically “at home” with the ability to adjust the width of the emulation channel and delays in data transmission. It also describes architecture and configuration of the experimental setup. The proposed modular structure can be expanded by available computing power.
文摘For development of passenger electrical transport, it is necessary to use energy more rationally. One of methods of vehicle power efficiency increase is installation of on-board energy storage systems. For studying of system operation, it is necessary to carry out a lot of experiments, therefore it is favorable to use the test bench and its computer model for reduction of the number of physical experiments. In this article, the results of computer modeling for the optimization of traction drive test bench by adjusting of the operation parameters of supercapacitor energy storage are described. Test bench operation is considered in cases of the energy storage system working at various selected supercapacitor initial voltages. Maximal increase of possibility of vehicle test bench regenerative braking with minimal decrease of autonomous power supply mode possibility is investigated. There is estimated the energy storage system efficiency improving measures dependence from supercapacitor operational voltage ranges. Parameters at which the minimum losses of energy are observed are revealed. Dependence of energy storage system discharge power on the most admissible supercapacitor current is established.
文摘In this paper, the TAS-I （Thales Alenia Space-Italy） Test Bench for Robotics and Autonomy （TBRA） is presented. It is based on a flexible and modular software architecture （Framework Engine）, in which each functional module （representing the GNC subsystems） implements a key functionality of the GNC （Guidance Navigation and Control）. Modules communicate by means of standardised interfaces designed for exchange of necessary information among the modules composing the entire system. This approach permits the interchange-ability of each subsystem without affecting the overall functionalities of the GNC system. In this paper, the TBRA system, together with the implemented functional modules will be described. Tests results will be reported and future development will be discussed.
文摘The automotive and lubricant industries have been placing increased emphasis on the fuel economy benefits of today′s modern passenger car motor oils.The current ILSAC GF-4 specification has more stringent requirements than previous ILSAC specifications,and the proposed future ILSAC GF-5 specification is looking at further improvements in the lubricant′s fuel economy performance.To address these needs,Afton Chemical has developed correlations between the rheological and frictional properties of oils and fuel economy measured in engine and field tests.In this paper we will present correlations between lubricants′ physical properties and fuel economy measured in vehicles and engine tests.These tools have been used to develop current commercial oils which are being used extensively to meet today′s OEM needs.
文摘This paper introduces a kind of substitute bench testing method for vehicle application development and testing method of the test requirements,including battery fast conversion cycle test equipment,enter type incubator,liquid-cooled machine and ancillary equipment composed of a set of test system,through the walk-in constant temperature box to simulate the new energy vehicles under different environmental conditions of the test requirements,Liquid-cooled machine and auxiliary parts to complete the battery thermal management system need cooling fluid conditions,the battery conversion cycle test equipment to simulate the dc fast charging way of filling pile,complete battery thermal management system test,shorten the filling fast charging time and improve battery fast charge security,for troubleshooting and data collection and analysis,Improve work efficiency,save costs,and eliminate customer anxiety about battery life and charging time.
